Raymarine Marine Instruments D6396-2 User manual
PDF
Download
Document
Advertisement
Advertisement
To Automatically Steer to a Fixed Wind Angle Autotack To Adjust Autopilot Course-keeping Accuracy ® Autopilot response controls course-keeping accuracy. Higher response settings keep a tighter course but increase the amount of drive activity and battery use. mode Set to a level appropriate for your needs WIND WIND SmartPilot® ST7002 Controller 45S RESPONSE Wind WIND 30P Wind Use or to adjust response level. Press disp to return to previous mode. WIND Auto Tack PORT 30P Auto Tack STARBOARD To Adjust Lighting Level 1 sec LAMP Wind 30P WIND D6396-2 30P N.B. Refer to section 1.5 of the ST7002 Operating Guide for full details Use disp to adjust lighting level. Wait 10 sec to return to previous mode. 86124-1 WIND Quick Start Guide To change the Autopilot Heading Display Layout & disp 55˚ Press to adjust calibration, response and gain Press to display data pages Press for 1 second for lamp control Press for 3 seconds for power off 85˚ course change keys Port 1˚ Port 10˚ Starboard 1˚ Starboard 10˚ auto Press to activate the Autopilot resp Press to display response level To follow a Route set on a Chartplotter AUTO mode standby + auto track When the Autopilot is activated, press to folow a route from a connected navigation system. Press again to accept the new course Press for Wind Vane mode mode res'm Press to select Wind Vane mode Press to resume previous course To activate the Autopilot AUTO standby Press for Manual Control For Manual Control STARBOARD NEXT WPT mode x3 STANDBY AUTO AUTO STANDBY AUTO OK? TRACK D6397-2 ">

Public link updated
The public link to your chat has been updated.
Advertisement