Pro Optic Camera Accessories PROFH User manual

4X4 FILTER KIT
MANUAL
Precise Tools for
Creative Exposures
INSTALLATION INSTRUCTIONS
1
Attach the appropriate adapter
ring to the threads on your lens.
Tighten firmly.
4
The filter holder should be
able to smoothly rotate around
the diameter of the adapter ring.
2
Align the bottom of the filter
holder and slide it into the
adapter ring.
5
Slide in the desired filters.
Adjust height and angle for
perfect exposure.
NOTES:
• The included filter holder will hold 100mm filters (2mm thick).
For other sizes please use clips.
• Due to the materials used, rotating the filter holder may result
in a squeaking or sliding noise. This is not a defect.
• You can use this accessory to hold 2 filters simultaneously.
Please purchase additional adapters if you require more.
3
Lift the locking pin and
completely install the filter
holder onto the adapter ring.
">