Philips PerfectCare Pure Steam generator iron GC7619/20 Quick Start Guide Readme File

GC7600_Pure_4239.001.0038.1_ENG.pdf
1
28-09-15
11:00
d
an e
ad p m
Re ee
k
Important
information
PerfectCare Pure
To enjoy the most out of your new steam generator, please read carefully.
For further information on usage and troubleshooting, please read
the user manual.
1. Usage of right water type
Tap water
OR
Recommended to use:
Tap water
OR
(ANTI-CALC Cartridge to be
replaced when exhausted)
Demineralised water
DO NOT USE:
Perfumed water, vinegar,
descaling agents, ironing
aids etc.
Demineralised water
(Replacement of ANTI-CALC
Cartridge will not be
necessary)
2. Steam control
Steam will enhance your ironing performance.
Control the steam while ironing by using the steam trigger.
FOR FIRST USE:
Press the steam trigger
continuously for up to
30 seconds for steam.
Press and hold the steam trigger
for steam during ironing.
Any questions?
Don’t go back to store, Philips is here to help. Contact us directly.
0207 949 0240
www.philips.com/support
015245443
Please
turn over for
descaling
GC7600_Pure_4239.001.0038.1_ENG.pdf
2
28-09-15
11:00
3. Sound and light reminder for replacement of ANTI-CALC Cartridge
1
ANTICALC
Steam function
disabled
Replace the ANTI-CALC
cartridge once the descaling light
flashes and the appliance beeps.
The steam function will be disabled
automatically if the ANTI-CALC
cartridge is not replaced.
4. Replacing the ANTI-CALC Cartridge
Remove the iron from the
iron platform and open
the ANTI-CALC cartridge
compartment.
Pull out the rubber cap
from the bottom of the
ANTI-CALC cartridge.
Press down the ANTI-CALC
cartridge in the compartment
until it locks into place and
close the lid.
• If you do not want to replace the ANTI-CALC cartridge, you have to use demineralized water or
descaled water from the IronCare.
• In that case, you need to leave the exhausted cartridge in the compartment.
AFTER REPLACEMENT OF THE ANTI-CALC CARTRIDGE:
Press the trigger continuously for up to 30 seconds for steam.
4239.001.0038.1