Everfocus EHA1280 Owner Manual

EHA1280 eZ.HD Series
1080p FHD IP66 IR Dome Camera
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: January, 2019
All the images including product pictures or screen shots in this document are for example
only. The images may vary depending on the product and software version. Information
contained in this document is subject to change without notice.
EverFocus Taiwan:
2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist., New Taipei City 222, Taiwan
TEL: +886 2 2662 2338 FAX: +886 2 2662 3632 www.everfocus.com.tw
1.
Introduction
Equipped with a 1080p Sony STARVIS CMOS sensor, the EverFocus eZ.HD series cameras –
EHA1280 deliver 1080p full HD image quality. The model provides 2.8-12mm lens with ICR.
Featured with Digital Wide Dynamic Range (D-WDR), the camera can provide clear images
even under backlight circumstances where intensity of illumination can vary excessively. The
EHA1280 supports both NTSC and PAL scanning systems and is IP66 certified.
1.1 Packing List

Camera x 1

Screw & Screw Anchor x 4

Mounting Sticker x 1

Desiccant Bag x 1

L-Type Wrench x 1

User Manual x 1
1.2 Features

1080p Full HD with high flexibility and performance for astounding image

1080p Sony STARVIS CMOS sensor, delivering amazing high sensitivity

Varifocal 2.8-12mm with ICR to capture the desired field of view

Extended IR range of up to 30m / 98ft. with 4 LEDs (depends on scene IR reflectivity)

D-WDR to improve the visibility under high contrast scene

3-Axis rotation design allows wall or ceiling mounting

IP66-rated with metal housing

Supports UTC function: Control camera OSD settings directly from DVR end
1.3 Dimensions
142mm / 5.59"
142mm / 5.59"
1.4 Optional Accessory
Wall Mount Bracket
Type
Image
Model Name
Color
Size (WxDxH)
Weight
Material
BA-EB45
White
245x160x163mm
9.65”x6.3”x6.42”
2.1kg / 4.63lb
Metal
Type
BA-EB28
White
140x136x233mm
5.51”x5.35”x9.17”
2.1kg / 4.63lb
Metal
BA-EB18
White
120x207x134mm
4.72”x8.15”x5.28”
1.1kg / 2.43lb
Metal
Ceiling Mount Bracket
Image
Model Name
Color
Size (WxDxH)
Weight
Material
BA-EB3A
White
136x136x243mm
5.35”x5.35”x9.57”
2.4kg / 5.29lb
Metal
BA-EB3B
White
136x136x443mm
5.35”x5.35”x17.44”
3.6kg / 7.94lb
Metal
1.5 Cable Description
1 Power Cable
2 Video Output Cable
No. Name
Descriptions
1
Power Cable
Connects to a 12VDC power source.
2
Video Output
1080p output, using a 75 Ohm BNC-type coaxial cable.
2
2.
Installation
1. Stick the supplied Mounting Sticker to the surface to mark the 4 screw positions. Drill
four holes on the surface and insert the supplied 4 Screw Anchors into the screw holes.
If you want to run the cable through the surface, drill a hole within the 4 screw area.
2. To mount the camera to the surface:
a. Remove the Base Plate from the camera. To do so, 1) Remove the Fix Screw 2)
Slightly push the Base Plate backward from the Fix Screw side and then pull out the
Base Plate.
Pull
Base Plate
Fix Screw
Push
b. Screw the Base Plate to the surface using the supplied 4 Screws.
Base Plate
Screws
c. Open the Camera Cover to remove the old desiccant bag from the Camera Body and
stick the supplied Desiccant Bag inside the Camera Body. It’s highly recommended
to replace the desiccant bag every time when you open the Camera Cover.
Note: Please screw back the Camera
Cover immediately in case of reducing
the absorption capacity of the desiccant
bag inside the camera body.
3
d. Attach the Camera Body to the Base Plate and then screw back the Fix Screw.
Base Plate
Camera Body
Fix Screw
UP
3. Connect the Power Cable to a 12VDCpower source. Connect the Video Output Cable to
a monitor or DVR.
4. You can use the Joystick on the cable to configure camera OSD settings or switch to
different video formats. Remove the Protection Cap from the Joystick before using it.
Switching Video Format:
• Push the joystick up for 5 sec. to switch to AHD.
• Push the joystick right for 5 sec. to switch to TVI.
• Push the joystick down for 5 sec. to switch to CVI.
• Push the joystick left for 5 sec. to switch to CVBS.
Configuring OSD Settings:
• Push the Joystick up / down to select among menu
items.
• Push the Joystick left / right to adjust the level of the
selected item.
• Press the Joystick to enter the submenu or exit the
OSD Setup Menu.
5. You can optionally adjust the camera angles. To do so, unscrew the 4 cover screws using
the supplied L-Type Wrench and then remove the cover. Adjust the camera angles (Tilt:
60°, Pan: 350°, Rotate: 350°). After adjusting camera angles, screw back the camera
cover.
DN
350°
60°
350°
4
3.
Configuration in the OSD Menu
You can configure camera settings in the OSD menu from DVR end.
Sub
No Main
Sub Menu / Function
Menu
1
Iris
ELC
Off
Focus Area
Wide / Narrow / Middle
DISP Tone
0-2
2
Focus Adj.
DISP H_POS 0-60
On
DISP V_POS 0-34
DISP H_Size 0-60
DISP V_ Size 0-34
Brightness 0-20
Auto
Normal / Deblur
1/30, 1/60, 1/120, 1/240, 1/480,
Shutter
Manual
Speed
1/1000, 1/2000, 1/4000, 1/8000,
3
Exposure
1/15000, 1/30000
Flicker
Sens-Up
Off, x2, x4, x8, x16, x32
AGC
0-10
Off
Mode
Night Only / All Day
Level
0-20
HLC
BLK / CUSTOMIZE / WHT / YEL / CYN / GRN
Color
/ MAG / RED / BLU
H-POS
0-20
V-POS
0-20
BLC
H-Size
0-20
V-Size
0-20
4
Backlight
Normal
Window Zone 0-3
Window Use
On / Off
Mode
H-POS
0-1920
WDR
ROI
V-POS
0-1080
H-Size
0-1920
V-Size
0-1080
Weight
Middle / High / Low
IR LED
On / Off
Anti-Sat.
0-20
LED Power
Dimming
Auto
AGC Thres
0-20
5
Day&Night Auto
Mode
AGC Margin
0-20
Middle / High /
Delay
Low
White LED
On / Off
Color
Anti-Sat.
0-20
5
LED Power
AGC Thres
AGC Margin
Delay
B&W
IR LED
Anti-Sat.
LED Power
AGC Thres
AGC Margin
Delay
Extern
IR LED
Anti-Sat.
LED Power
Extern SW
D > N Thres
N > D Thres
Delay
6
Color
7
DNR
8
Image
AWB
Auto
Autoext
Preset
Manual
C-Temp
R-Gain
B-Gain
Color Gain 0-20
Middle / High / Off / Low
CVBS
0-10
CVI
0-10
Sharpness
TVI
0-10
AHD
0-10
Gamma
0.45 / 0.55 / 0.65 / 0.75
Mirror
On / Off
Flip
On / Off
ACE
Off / Low / Middle / High
Off
Defog
Mode
On
Level
Off
Zone Num
Zone DISP
H-POS
Privacy
V-POS
On
H-Size
V-Size
Y-Level
CB Level
6
Dimming
0-20
0-20
Middle / High /
Low
On / Off
0-20
Dimming
0-20
0-20
Middle / High /
Low
On / Off
0-20
Dimming
High / Low
0-20
0-20
Middle / High /
Low
3000K / 5000K / 8000K
0-20
0-20
Manual / Auto
Low / Middle / High
0-15
On / Off
0-60
0-34
0-60
0-34
0-20
0-20
CR Level
Trans
Off
Det
Window
9
Motion
On
Output
Mode
Image
Range
10
System
Color
Space
Color Bar
Language
Cam Title
Reset
Det Tone
Mdrect Fill
Sensitivity
Motion OSD
Text Alarm
Signal Out
HD Output
Frame Rate
Freq.
Confirm
Full
Comp
User
0-20
0/1/2/3
Window Zone 0 / 1 / 2 / 3
Window Use On / Off
Det H-POS
0-60
Det V-POS
0-34
Det H-Size
0-60
Det V-Size
0-34
0/1/2/3/4
On / Off
0-10
On / Off
On / Off
On / Off
Off / CVBS / CVI / TVI / AHD
1080 25P(30P) / 720 25P(30P) / 720
50P(60P)
50HZ / 60HZ
YES
Offset
0-32
HD-CbCr / YUV / SD-CbCr
On / Off
ENG / CHN / CHN(S) / JPN / KOR / POR
Off
Right Up
Left Down
7