TOA PC-2268 User manual

 Zl TOA SURFACE-MOUNT SPEAKER 6W PC-2268
BOESCRIPTION
The PC-2268 is a surface—mount speaker with rated input of 6 W (100 V line application) designed
for ceiling surface or wall surface installations. With the additional use of an electrical box, it can be
installed to the location where no wall or ceiling is available for mounting. Compact and attractive design
to blend in with interior spaces. The push—in type input terminal provides an easy cable connection an
allows bridge wiring. The input power change can be made easily by changing the tap position of the
transformer. Rear—closed structure with a rear cover keeps performance and sound quality constant
regardless of installation location.
BSPECIFICATIONS
Rated Input 6 W (for 100 V line), 3 W (for 70 V line)
Rated Impedance 100 V line: 1.7 kQ (6 М), 3.3 kQ (3 W), 6.7 kQ (1.5 W), 13 kQ (0.8 W)
70 V line: 1.7 kQ (3 W), 3.3 kQ (1.5 W), 6.7 КО (0.8 W), 13 kQ (0.4 W)
Sensitivity 90 dB (1 W, 1 m, 330 Hz — 3.3 kHz, pink noise)
Frequency Response 160 Hz — 14 kHz (20 dB below peak)
Speaker Component — 12 cm (5) cone—type
Applicable Cable 600 Y viny—insulated cable (IV wire or HIV wire)
Solid copper wire: 90.8 — 91.6 mm (equivalent to AWG 20 — 14)
/—core twisted copper wire: 0.75 — 1.250 mm? (equivalent to AWG 18 — 16)
Connection Push—in connector (bridging terminal)
Operating Temperature —10' to +50' (147 to 122%)
Finish Front case, Rear case:
Fire—resistant HIPS resin (resin material grade: UL94V-0), light gray
Dimensions $220 X 80.5 (D) mm (98.667 X 3.17”) (excluding projection)
Weight 880 g (1.94 Ib)
Accessory Switch box mounting screw (M4 X 35) 2, Ceiling mounting screw (4 X 35) 2
Note: The speaker is designed for indoor use. Avoid installing it in the following locations.
Failure to follow this instruction could result in equipment failure or cause the speaker to fall due to
deterioration of its mounting parts.
1. Locations directly exposed to salt water near the seashore
2. Locations where rainwater could enter the unit
3. Locations exposed to constant vibration
4. Indoor swimming pools or such locations where liquid chemicals are used
0. Kitchens or such locations where grease or oily smoke is generated
6. Steamy, humid, or dusty locations
Rear case section| Front case section
ШАРРЕАКАМСЕ = Input ‚Matching
N E HOTtblack) 13 ко, UTE
° 197188
6142 [45.59”] © Ш 6.7 КО
в > С o 3.3 ka
Intermediate Intermediate
connector connector 47 kOf(black)
— ME | |
Q oo | COM white)
| — COM( white)
Nu > N°. Note: The input is factory-preset to 1.7 kQ.
< Bridge line . .
= Wiring diagram
Knockout hole Cable entry hole
2—98 [90.317 30 [91.18"
5 [0.2”]
7.5 [0.29”]
15 [0.59”]
66.7 [2.63”]
83.5 [3.29”]
2220 [98.66]
Front View
UNIT:mm SCALE:1/4
08L
Rear View
TOA Corporation DWG No: GPCO2WA1-1