Brother DCP-165C Installation Guide

For Windows® 7 Users
Before using the machine
Insert the supplied CD-ROM for Windows® 7. For
setting up the machine and installing the printer
driver, follow the steps in the Quick Setup Guide
along with the information on this sheet.
Note
If either of the following screens appears, click
the check box and click Install to complete the
installation properly.
Instructions for installation
If the User Account Control dialog box appears on
your computer during installation of the driver &
software or BRAdmin Light for Windows®, click Yes.
Then, proceed to the next step in the Quick Setup
Guide.
Driver & Software installation
About Status Monitor
Status Monitor display
„ For Laser/LED Models:
BRAdmin Light for Windows® installation
If you have set the Enable Status Monitor during
installation, you will find the
button or Status
Monitor icon on the taskbar.
„ For Inkjet Models:
Your initial setting of Status Monitor is ON, and you
will find the
button or Status Monitor icon on the
task bar.
To show the Status Monitor icon on your taskbar,
click the
button. The Status Monitor icon will
appear in the small window. Then drag the icon to
the taskbar.
Computer requirements
Minimum System Requirements and Supported PC Software Functions
Operating
System 1
Supported
Functions
Minimum Processor
Windows® 7 2
Printing,
Scanning,
PC-FAX 3,
Removable Disk 4
Intel® Pentium® 4 or
equivalent
64-bit (Intel® 64 or
AMD64) supported CPU
1 Microsoft® Internet Explorer® 5.5 or greater.
2 For WIA, 1200 x 1200 dpi resolution. Brother Scanner Utility enables to
enhance up to 19200 x 19200 dpi.
3 PC FAX supports black and white faxing only.
4 Removable disk is a function of PhotoCapture Center®.
Minimum RAM
1GB (32-bit)
2GB (64-bit)
Recommended
RAM
Required Hard Disk Space
For
Drivers
For
Applications
1GB (32-bit)
2GB (64-bit)
650MB
530MB
For the latest driver updates, visit us at http://solutions.brother.com/.
All trademarks, brand and product names are property of their respective
companies.
Version 0