NXP MC68376 32 Bit Microcontroller User Guide
NXP MC68336 is a highly-integrated 32-bit microcontroller that combines high-performance data manipulation capabilities with powerful peripheral subsystems. It is ideal for use in a wide range of applications, including automotive, industrial, and consumer products.
The MC68336 is built around a 32-bit CPU core that is capable of executing a wide range of instructions, including both integer and floating-point operations. It also includes a number of on-chip peripherals, including a time processor unit, a configurable timer module, a queued serial module, and a 10-bit queued analog-to-digital converter module. These peripherals allow the MC68336 to be used in a wide range of applications, including data acquisition, motor control, and communications.
Advertisement
Advertisement
Freescale Semiconductor, Inc. SECTION 1 INTRODUCTION The MC68336 and the MC68376 are highly-integrated 32-bit microcontrollers, combining high-performance data manipulation capabilities with powerful peripheral subsystems. Freescale Semiconductor, Inc... MC68300 microcontrollers are built up from standard modules that interface through a common intermodule bus (IMB). Standardization facilitates rapid development of devices tailored for specific applications. The MC68336 incorporates a 32-bit CPU (CPU32), a system integration module (SIM), a time processor unit (TPU), a configurable timer module (CTM4), a queued serial module (QSM), a 10-bit queued analog-to-digital converter module (QADC), a 3.5-Kbyte TPU emulation RAM module (TPURAM), and a 4-Kbyte standby RAM module (SRAM). The MC68376 includes all of the aforementioned modules, plus a CAN 2.0B protocol controller module (TouCAN™) and an 8-Kbyte masked ROM (MRM). The MC68336/376 can either synthesize the system clock signal from a fast reference or use an external clock input directly. Operation with a 4.194 MHz reference frequency is standard. The maximum system clock speed is 20.97 MHz. System hardware and software allow changes in clock rate during operation. Because MCU operation is fully static, register and memory contents are not affected by clock rate changes. High-density complementary metal-oxide semiconductor (HCMOS) architecture makes the basic power consumption of the MCU low. Power consumption can be minimized by stopping the system clock. The CPU32 instruction set includes a low-power stop (LPSTOP) instruction that efficiently implements this capability. Documentation for the Modular Microcontroller Family follows the modular construction of the devices in the product line. Each microcontroller has a comprehensive user's manual that provides sufficient information for normal operation of the device. The user's manual is supplemented by module reference manuals that provide detailed information about module operation and applications. Refer to Motorola publication Advanced Microcontroller Unit (AMCU) Literature (BR1116/D) for a complete listing of documentation. MC68336/376 USER’S MANUAL INTRODUCTION Rev. 15 Oct 2000 For More Information On This Product, Go to: www.freescale.com MOTOROLA 1-1 Freescale Semiconductor, Inc... Freescale Semiconductor, Inc. MC68336/376 USER’S MANUAL INTRODUCTION Rev. 15 Oct 2000 For More Information On This Product, Go to: www.freescale.com MOTOROLA 1-2 ">
Download
Advertisement