DENVER CRL-330 Clockradio Instruction manual

Instruction Manual

Clock Radio CRL-330

www.denver-electronics.com

Before operating this product, please read this instruction manual carefully and completely.

Product Information

EN Correctly set the stand in specially design for it slot.

Use USB cable to connect alarm clock to computer Use the adaptor to an electricity network Use batteries as a backup power source (if the electricity is down, no access to the network or computer; using the alarm clock in different locations, the batteries save all your setting) To install the batteries: Use 2 batteries type AAA (not included).

EN Correctly set the stand in specially design for it slot.

Use USB cable to connect alarm clock to computer Use the adaptor to an electricity network Use batteries as a backup power source (if the electricity is down, no access to the network or computer; using the alarm clock in different locations, the batteries save all your setting) To install the batteries: Use 2 batteries type AAA (not included).

Close the battery cover. When the product is running on batteries, they are Function abilities limited: Open the battery compartment, following the arrow on the battery cover to remove the cover. lnsert 2 AAA batteries, observe the polarity, which can be viewed inside the compartment. Time display will be switched off after 5 seconds. Press any key to switch on time display. Alarm function is available. Radio is available. All light functions are unavailable in battery mode Close the battery cover. When the product is running on batteries, they are Function abilities limited: Open the battery compartment, following the arrow on the battery cover to remove the cover. lnsert 2 AAA batteries, observe the polarity, which can be viewed inside the compartment. Time display will be switched off after 5 seconds. Press any key to switch on time display. Alarm function is available. Radio is available. All light functions are unavailable in battery mode

EN Setting current time When the power is connected, the hours indication starts to blink Hours Setting: Use to adjust hour To confirm press Minute Setting: Use to adjust minute To confirm press If the indication is stopped touch 12H-24H-format Press again. key to switch the time format between 12H and 24H 12H AM or PM will appear on time display.

Changing current time EN Setting current time When the power is connected, the hours indication starts to blink Hours Setting: Use to adjust hour To confirm press Minute Setting: Use to adjust minute To confirm press If the indication is stopped touch 12H-24H-format Press again. key to switch the time format between 12H and 24H 12H AM or PM will appear on time display.

Changing current time

Touch button The hours indication starts to blink.

Hours Setting: Use to adjust hour To confirm press Minute Setting: Use to adjust minute.

To confirm press If the indication is stopped touch again.

Intensity of time display Press key to select the display intensity LOW

HIGH

OFF Touch button The hours indication starts to blink.

Hours Setting: Use to adjust hour To confirm press Minute Setting: Use to adjust minute.

To confirm press If the indication is stopped touch again.

Intensity of time display Press key to select the display intensity LOW

HIGH

OFF

Sunrise light simulation

When the alarm time is set, the wake up light will switch on 30 minuts before the alarm time in low brightness and gradually increase the brightness. At the alarm time the brightness will be full. The natural sound or radio will be played for 2 minuts at the alarm time. During wake up alarm play Touch sound.

button to snooze the alarm for 5 minuts. After 5 minuts the alarm will play again for 2 minuts. Press or touch any buttons except to stop - Press and hold to switch off wake up light.

EN FM Radio Touch button to turn on/off. Press and hold button for 3 seconds to auto scan. All available FM channels will be scanned and saved automatically. Touch to select an FM station.

Press key to choose volume level 1-15.

Note: time display isn’t indicated when Radio is turned on.

Setting the alarm w ake-up time Touch button to switch on/off alarm mode.

symbol appears/disappears on clock display.

Press and hold button to set alarm. The hours indication starts to blink. EN FM Radio Touch button to turn on/off. Press and hold button for 3 seconds to auto scan. All available FM channels will be scanned and saved automatically. Touch to select an FM station.

Press key to choose volume level 1-15.

Note: time display isn’t indicated when Radio is turned on.

Setting the alarm w ake-up time Touch button to switch on/off alarm mode.

symbol appears/disappears on clock display.

Press and hold button to set alarm. The hours indication starts to blink.

Hours Setting: Use Use to adjust hour.

To confirm press Minute Setting: to adjust minute.

To confirm press If the indication is stopped touch Nature sounds Press again.

key to select the alarm sound Use to select 1-7 sounds. Press to confirm selection.

Each sound (1-6) will play 5 sec before you choose. When 7 is selected the last played radio station will be played as wake up sound Press Key to select volume level 00-15 Hours Setting: Use Use to adjust hour.

To confirm press Minute Setting: to adjust minute.

To confirm press If the indication is stopped touch Nature sounds Press again.

key to select the alarm sound Use to select 1-7 sounds. Press to confirm selection.

Each sound (1-6) will play 5 sec before you choose. When 7 is selected the last played radio station will be played as wake up sound Press Key to select volume level 00-15 EN Setting the Sunset time Touch to switch on/off sunset mode symbol appears/disapears EN Setting the Sunset time Touch to switch on/off sunset mode symbol appears/disapears

on time display.

Press and hold The hours indication starts to set.

Hours Setting: to set Use to adjust hours.To confirm press minute setting: Use Light to adjust minute. To confirm press Touch Use to switch on the light to adjust the level (1-10) of the brightness Second touch of will switch on automatic color changing mode Use to select color: Green, Red, Blue, Purple, Orange, lndigo Third touch to switch off the light on time display.

Press and hold The hours indication starts to set.

Hours Setting: to set Use to adjust hours.To confirm press minute setting: Use Light to adjust minute. To confirm press Touch Use to switch on the light to adjust the level (1-10) of the brightness Second touch of will switch on automatic color changing mode Use to select color: Green, Red, Blue, Purple, Orange, lndigo Third touch to switch off the light

Sunset light simulation

30 min before sunset time, the light is turned on with 100% brightness and then the brightness is reduced gradually and will turn off at sunset time.

During sunset light is turned on you may: Press and hold to turn off the light.

Description

* * * * * * * * * * * * * Led time display in 12H-24 format Sunrise wake up light simulation Sunset light simulation Bedside lamp White light flux: 73LM 6 Nature sounds to wake up 10 levels of the brightness 6 coloured light+white light Automatic changing of color light FM radio with antenna 15 volume levels Touch mode Power supply: DC 5V; 2xAAA batteries; USB cable. Note: When the battery is low the product may not function properly.

Replace the battery with fresh battery.

EN Light display Time display Snooze Current time Alarm Down i Light FM Sunset Up Nature sounds Volume Battery compartment Stand 12H-24H format Intensity of time display EN Light display Time display Snooze Current time Alarm Down i Light FM Sunset Up Nature sounds Volume Battery compartment Stand 12H-24H format Intensity of time display

USB 5V Antenna USB 5V Antenna

warning

* Don’t press two or more keys at the same time * To avoid failure interval of every touch must be more than 1 second. * If there is any malfunction, please unplug the unit for 3 seconds. * If the batteries are not used for a long time, please remove. * When the batteries voltage is low, the product will get restarted and all settings are lost. Please replace new batteries. * The adapter is designed to use with this product only, Please do not use the adapter to charge other devices like Mobile Phone.

warning

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material Electric and electronic equipment is marked with the crossed out trash can symbol, seen above. This symbol signifies that electric and electronic equipment should not be disposed of with other household waste, but should be disposed of separately. All cities have established collection points, where electric and electronic equipment can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city. Imported by: DENVER ELECTRONICS A/S Omega 5A, Soeften DK-8382 Hinnerup www.facebook.com/denverelectronics