DENVER DSB-2010MK2 Bluetooth soundbar User Manual

Sound Bar User Manual
Operating Introduction
a. Place the Soundbar on flat surfaces. Alternatively, you can wall mount the Soundbar with the screws
provided. This Soundbar can be connected to play sound in three different ways:
1. Connect to your Television Headphone Socket
2. Connect to any Bluetooth enabled device
3. Connect to a USB Drive (stick) loaded with music files
b. Cable and external devices connection arrangements:
LINE IN
USB
DC 12V IN
EN
LINE IN
DC 12V IN
EN
LINE IN
DC 12V IN
c. At the right hand side of the Sound Bar are the manual control buttons:
EN
Hold down /MODE for Power
On/Standby.
Press /MODE to change the
mode between: Line In ->
Bluetooth -> USB Drive
EN
Hold down /MODE for Power
On/Standby.
Press /MODE to change the
mode between: Line In ->
Bluetooth -> USB Drive
Press/Hold down II / MUTE for
Pause/Play. (USB Drive)
Press/Hold down II / MUTE for
Mute / No Mute. (Line In)
Press/Hold down II / MUTE for
Pause/Play. (USB Drive)
Press/Hold down II / MUTE for
Mute / No Mute. (Line In)
Hold down VOL+ /I for Volume
up.
Press VOL+ /I for Next USB
Drive Song.
Hold down VOL+ /I for Volume
up.
Press VOL+ /I for Next USB
Drive Song.
Hold down VOL- / I for Volume
down.
Press VOL- / I for Previous
Drive Song.
Hold down VOL- / I for Volume
down.
Press VOL- / I for Previous
Drive Song.
d. Front LED Display showing the different input modes
Line In
Bluetooth
USB drive when USB Drive in (no USB drive
will flash Lod and skip to next mode in
seconds)
Front indicator Lights:
Red dot: Soundbar in standby
bt font: Flashing means Bluetooth is waiting to pair with your Bluetooth enabled device.
bt lit and static means a Bluetooth device is paired.
e. Remote control buttons
+
I
I
II
EQ
Mode
Power on / Standby
Mute
Volume up
Volume down
Previous (USB drive audio)
Next
(USB drive audio)
Play/Pause(USB drive audio)
Repeat
(USB drive audio)
Equalizer selection
Audio source selection
* EQ (Equalizer) Preset Music tone settings to suit personal taste
While playing music continually press the EQ button to toggle between the
different presets
Display
Eq0
Eq1
Eq2
Eq3
Eq4
Eq5
f.
EQ mode
Normal
Rock
Pop
Classic
Jazz
Country
Importance Notice for soundbar mounting on the wall:
1) Wall- mounted installation must be carried out by qualified personnel only.
Incorrect assembly can result in severe personal injury and property damage! (If you intend to
install this product yourself, you must check for installations such as electrical wiring and plumbing,
which may be hidden inside or behind the wall.)
2) It is the installer’s responsibility to verify and confirm that the wall will safely support the total load of
the unit and wall brackets.
3) Additional tools (not included) are required for the installation.
4) Do not overtighten screws.
5) Use an electronic stud finder to check the wall type before drilling and mounting
6) The proposed height on the wall is 1.0~1.5meters
Technical Specification
Power/Amps: Input:
Power consumption:
Max output power:
AC110~240V, 50/60Hz, Output: DC12V, 2.0A
18W
20W
Working temperature:
Bluetooth version:
Operating frequency range:
Soundbar measurement:
Bluetooth name:
0~35 o C
5.0
2402-2480Mhz
60cm x 6cm x 6cm
DSB-2010MK2
Packing List
. Sound bar
. Manual
. 3.5mm to 3.5MM audio cable
. Flat head screws (D7.5 * L25mm)
. Remote control with batteries
. Mains Power supply
x2
Please notice - All products are subject to change without any notice. We take
reservations for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment contains materials, components and
substances that can be hazardous to your health and the environment, if the
waste material (discarded electric and electronic equipment) is not handled
correctly.
Electric and electronic equipment is marked with the crossed out trash can
symbol, seen above. This symbol signifies that electric and electronic equipment
should not be disposed of with other household waste, but should be disposed of
separately.
All cities have established collection points, where electric and electronic
equipment can either be submitted free of charge at recycling stations and other
collection sites, or be collected from the households. Additional information is
available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type DSB-2010MK2 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.denver-electronics.com and then click the search ICON on topline of website.
Write modelnumber: DSB-2010MK2.Now enter product page, and red directive is
found under downloads/other downloads
Operating Frequency Range:2402-2480Mhz
Max Output Power: 20W
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics