Moxa ioLogik E2200 Series Quick Installation Guide

ioLogik E2200 Series
Quick Installation Guide
Smart Ethernet Remote I/O
Edition 1.0, January 2019
Technical Support Contact Information
www.moxa.com/support
Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax: 1-714-528-6778
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax: +86-21-5258-5505
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax: +49-89-3 70 03 99-99
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax: +886-2-8919-1231
Moxa India:
Tel:
+91-80-4172-9088
Fax: +91-80-4132-1045
 2019 Moxa Inc. All rights reserved.
P/N: 1802022000010
*1802022000010*
Package Checklist
•
•
•
1 ioLogik E2200 series remote I/O product
Quick installation guide (printed)
LDP1602 LCD Module (Optional)
Specifications
Ethernet Interface
10/100BaseT(X) Ports
1
(RJ45 connector)
Magnetic Isolation
1.5 kV (built-in)
Protection
Ethernet Software Features
Configuration Options
Web Console (HTTP), Windows Utility
Industrial Protocols
CGI commands, Modbus TCP Server (Slave),
Moxa AOPC (Active Tag), MXIO Library,
SNMPv1 Trap, SNMPv1/v2c/v3
Management
ioAdmin, BootP, IPv4, SMTP, DHCP Client,
HTTP, Web Console, TCP/IP
MIB
Device Settings MIB
Time Management
SNTP
Serial Interface
Baudrate
1200 bps to 115,200 kbps
Connector
Terminal block
No. of Ports
1
Parity
None
Serial Standards
RS-485
Stop Bits
8
Serial Signals
RS-485-2w
Data+, Data-, GND
Power Parameters
Input Voltage
12 to 36 VDC
No. of Power Inputs
1
Power Connector
1 removable 6-contact terminal block
Power Consumption
ioLogik E2210 Series: 202 mA @ 24 VDC
ioLogik E2212 Series: 136 mA @ 24 VDC
ioLogik E2214 Series: 170 mA @ 24 VDC
ioLogik E2240 Series: 198 mA @ 24 VDC
ioLogik E2242 Series: 178 mA @ 24 VDC
ioLogik E2260 Series: 95 mA @ 24 VDC
ioLogik E2262 Series: 160 mA @ 24 VDC
Physical Characteristics
Dimensions
115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)
Weight
250 g (0.55 lb)
Installation
DIN-rail mounting, wall mounting
Wiring
I/O cable, 16 to 26 AWG
Power cable, 16 to 26 AWG
-2-
Environmental Limits
Operating Temperature
Storage Temperature
(package included)
Ambient Relative
Humidity
Altitude
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to
167°F)
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
2000 m (Please contact Moxa if you require
products guaranteed to function properly at
higher altitudes.)
LED Indicators
LED
PWR
RDY
Serial
Ethernet
DI
DO
DIO
AI
RTD
TC
DO Power
Light
Off
Red
Off
Green
Red
Green, blinking
Green/Red, blinking
Off
Red
Blinking
Off
Amber
Green
Blinking
Off
Green
Off
Red
Off
Green
Amber
Off
Green
Green
Red
Green
Red
Off
Red
Description
System power off
System power on
System not ready
System ready
System error
Click & Go running
System in Safe mode
Serial port not connected
Serial port connected
Data sending and receiving
Ethernet port not connected
10 Mbps connected
100 Mbps connected
Data sending and receiving
DI status off
DI status on
DO status off
DO status on
DI or DO status off
DI mode and status on
DO mode and status on
AI channel disabled
Transmitter not connected when in 4
to 20 mA mode
AI channel enabled
RTD status on
RTD transmitter not connected
TC status on
TC transmitter not connected
External power off or not connected
External power on
-3-
I/O Wiring Diagrams
Contact Type
Power Source Requirement
A dry Contact does not need to be connected to a
Dry Contact
power source to function properly.*
A wet Contact must be connected to a power source
Wet Contact
to function properly.
*Some users connect dry contacts to a power source for added stability.
Depending on your application, you can decide whether or not to connect
your dry contacts to power sources.
-4-
Mounting
There are two ways to mount the ioLogik E2200 Series: DIN rail or wall
mounting.
•
•
Mounting on a DIN rail
Pull out the bottom slider; latch the unit onto the DIN rail, and then
push the slider back in.
Mounting on a wall
Pull out both the top and bottom sliders and align the
screws accordingly. The heads of the screws should
be less than 6.0 mm in diameter, and the shafts
should be less than 3.5 mm in diameter, as shown in
the figure.
Connecting to the ioLogik E2200
You have two ways to connect to the ioLogik E2200: by ioAdmin or by web
console.
•
•
Default IP Address: 192.168.127.254
Subnet Mask: 255.255.255.0
NOTE
Be sure to configure the host PC’s IP address to the same subnet
as the ioLogik E2200. For example, 192.168.127.253
Restore Factory Defaults
There are three ways to restore the ioLogik to factory default settings.
1.
2.
3.
Hold the RESET button for 5 seconds.
Right-click on the specific ioLogik in the ioAdmin utility and select
Reset to Default.
Select Load Factory Default from the web console.
NOTE
Refer to the user's manual for detailed configuration and settings
information.
-5-
How to Download the Software
Step 1: Click on the following link to open the Support & Downloads
search tool:
http://www.moxa.com/support/support_home.aspx?isSearchShow=1
Step 2: Type the model name in the search box or select a product from
the drop down box and then click Search.
Step 3: Click the Software Packages link to download the latest
software for the product.
-6-