Navman MOVE75 User Manual
Add to my manuals
57 Pages
Navman MOVE75 is a user-friendly GPS navigation device designed to provide you with accurate and reliable directions on your journeys. Whether you're a seasoned traveler or just starting out, this device is packed with features to make your travels easier and more enjoyable. With its advanced navigation capabilities, you can plan your trips with ease, find your way around unfamiliar destinations, and stay informed about traffic conditions along the way.
advertisement
▼
Scroll to page 2
of 57
MOVE75 M100 User Manual Table of contents Important safety information....................................................................... 4 Precautions....................................................................................... 4 Declaration of conformity.................................................................... 6 Getting to know your Navman.................................................................... 7 Mounting your Navman in a vehicle............................................................. 8 Turning your Navman ON and OFF............................................................ 10 Resetting your Navman..................................................................... 10 Connecting your device to the computer.................................................... 11 Inserting a memory card........................................................................... 12 Navigating on the screen.......................................................................... 13 Main Menu............................................................................................ 14 Navigating through the menu screens................................................. 15 Using the Keyboard screen...................................................................... 16 How do I go from A-B?............................................................................ 17 How do I use the FIND wizard?.......................................................... 17 How do I plan my first trip?................................................................ 18 How do I preview the destination on map?.......................................... 19 How do I view my route?......................................................................... 20 The driving map............................................................................... 20 How do I change the route configuration?.................................... 20 How do I view my route statistics?...................................................... 21 How do I adjust the volume?............................................................. 21 How do I zoom in/out the map?......................................................... 22 Advanced routing functions.............................................................. 22 Back-On-Track™ automatic rerouting........................................... 22 Parking assistant....................................................................... 22 My Places.............................................................................................. 23 How do I save a location as My Place or Home?................................... 23 How do I navigate to a location I have saved?....................................... 23 How do I navigate to Home?............................................................. 24 How do I navigate to a recent place?................................................... 24 How do I edit a saved location in My Places?....................................... 24 How do I search for a POI?....................................................................... 25 How do I find the nearest POIs using Near Me?.................................... 25 How do I search for a POI by type?..................................................... 26 How do I search for a POI by Smart Find Keyword?.............................. 27 Customising the system settings............................................................... 28 Audio............................................................................................. 28 1 Screen............................................................................................ 28 Safety............................................................................................. 29 Route options.................................................................................. 30 Map display.................................................................................... 30 My Maps........................................................................................ 31 Language........................................................................................ 31 Units.............................................................................................. 31 Time Zone....................................................................................... 31 Device............................................................................................ 32 Demo............................................................................................. 32 Help............................................................................................... 33 What is NavDesk?................................................................................... 34 Can I use NavDesk with my computer?............................................... 34 How do I install NavDesk onto my computer?...................................... 34 My Subscriptions............................................................................. 36 How do I purchase a subscription?.............................................. 36 How do I activate my subscription?............................................. 36 How do I update subscriptions on my Navman?............................ 36 How do I recover my subscription?.............................................. 37 My Maps........................................................................................ 37 How do I install maps onto my Navman?...................................... 38 How do I remove maps from my Navman?................................... 39 Custom POIs................................................................................... 39 How do I install custom POIs?..................................................... 40 How do I delete a custom POI file/category from my Navman?........ 41 Image Search.................................................................................. 41 How do I search for a photo with embedded GPS coordinates on the Internet?............................................................................ 42 How do I import a photo with embedded GPS coordinates to My Places?.................................................................................... 42 Unlock Features............................................................................... 42 Redeem.......................................................................................... 43 My Places....................................................................................... 44 How do I sort My Place locations?............................................... 44 How do I import or export a location?.......................................... 44 How do I edit a location from the map screen?.............................. 45 My Navman.................................................................................... 46 How do I change the displayed language for NavDesk?................. 46 How do I install or remove a voice file for my Navman?.................. 46 How do I register my Navman and set a PIN?................................ 46 How do I backup and restore my Navman?................................... 47 How do I recover maps and voice files for my Navman?.................. 47 How do I update my Navman?.................................................... 47 How do I recover keys on my Navman?........................................ 48 How do I configure NavDesk?.................................................... 48 Reference.............................................................................................. 50 About GPS and signal reception......................................................... 50 Caring for your Navman.................................................................... 50 Troubleshooting............................................................................... 51 For more information............................................................................... 52 2 Online support................................................................................ 52 Navman customer support................................................................ 52 Speed limit...................................................................................... 52 Safety camera POIs.......................................................................... 52 POI categories................................................................................. 53 Branded POIs.................................................................................. 54 3 Important safety information • Removing original equipment, adding accessories or modifying your vehicle could affect the vehicle’s safety or make it illegal to operate in some jurisdictions. • Follow all product instructions and all instructions in your vehicle owner’s manual regarding accessories or modifications. • Consult your country’s and/or state’s laws regarding operation of a vehicle with any accessories or modifications. • It is your sole responsibility to place, secure and use your Navman in a manner that will not cause accidents, personal injury or property damage. Always observe safe driving practices. • Do not mount your Navman in a way that may interfere with the safe operation of the vehicle, the deployment of air bags or other safety equipment. • Do not operate your Navman while driving. • Before you use your Navman for the first time, familiarize yourself with your device and its operation. • On main roads, the distance to an exit calculated by your Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while your Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road. To prepare to exit a road, always follow distance information on road signs. • The use of information regarding safety or speed camera locations may be subject to local laws in the country of use. You are responsible for checking that you can legally use the information in your country or in the country where the information will be used. • Do not handle your Navman while it is hot. Let the product cool, out of direct sunlight. Precautions Failure to adhere to these warnings and cautions may lead to death, serious injury or property damage. Navman disclaims all liability for installation or use of your Navman that causes or contributes to death, injury or property damage or that violates any law. About charging • Use only the charger supplied with your device. Use of another type of charger will result in malfunction and/or danger. • This product is intended to be supplied by a LISTED Power Unit marked with “LPS,” “Limited Power Source” and output rated + 5 V dc / 1 A. • Use a specified battery in the equipment. 4 About the charger • Do not use the charger in a high moisture environment. Never touch the charger when your hands or feet are wet. • Allow adequate ventilation around the charger when using it to operate the device or charge the battery. Do not cover the charger with paper or other objects that will reduce cooling. Do not use the charger while it is inside a carrying case. • Connect the charger to a proper power source. The voltage requirements are found on the product case and/or packaging. • Do not use the charger if the cord becomes damaged. • Do not attempt to service the unit. There are no serviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture. About the battery • Use a specified battery in the equipment. • CAUTION: The battery can burst or explode, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush, puncture, or dispose of in fire or water. • Important instructions (for service personnel only) • Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. • Replace only with the same or equivalent type recommended by the manufacturer. • The battery must be recycled or disposed of properly. • Use the battery only in the specified equipment. • Only use the correct home charger (may be sold separately) or in-car charger supplied by Navman to charge your Navman internal battery. • Only use your Navman internal battery with your Navman unit. • Your Navman uses a Lithium-ion battery. It is important to follow the guidelines set out regarding this type of Battery. Electronic devices using a lithium – ion battery such as Mobile phones, GPSs and cameras are designed to operate at a temperature range of approximately 0°C to 50°C. Beyond these temperature limits, there may be a risk of battery failure, when these electronic goods are exposed to extreme heat conditions for long periods. It is recommended that you do not use your Navman in a humid, wet and/or corrosive environment. Do not put, store or leave your product in or near a heat source, in a high temperature location, in strong direct sunlight and do not expose it to temperatures over 60°C (140°F). Failure to follow these guidelines may cause the Lithium-ion battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention 5 immediately. For safety reasons, and to prolong the lifetime of the battery, charging should not occur at low (below 0°C/32°F) or high (over 45°C/113°F) temperatures. THE LITHIUM-ION BATTERY CONTAINED IN THE PRODUCT MUST BE RECYCLED OR DISPOSED OF PROPERLY. It is highly recommended you use your Navman only WITH THE SUPPLIED DC POWER LEAD (CAR CHARGER/BATTERY CABLE) AND AC ADAPTER (HOME CHARGER) FOR BATTERY CHARGING. For more information on how to recycle your old electronic devices, please contact your local council office. You can also visit www.navman.com.au / www.navman.co.nz to view our latest trade-in offers. Declaration of conformity Note: For regulatory identification purposes: • Navman MOVE75 is assigned a model name of Navman MOVE75. • Navman M100 is assigned a model name of Navman M100. Marking labels located on the exterior of your Navman indicate the regulations that your model complies with. Please check the marking labels on your Navman and refer to the corresponding statements in this chapter. Some notices apply to specific models only. R-NZ The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. 6 Getting to know your Navman Name Description Power button Turns your Navman on and off. Reset button Restarts your Navman. Speaker Sends out sounds and voice. Stylus Tap on the touch screen to make selections and enter information. Touch screen Charge indicator Displays the output of your Navman. • Glows in red when charging is in progress. • Turns off when the battery is full. Mini-USB connector Memory card slot ❾ Earphone jack Connects to the charger or USB cable. Accepts a MicroSD card for accessing data such as maps. Connects to stereo headphones or audio lead. 7 Mounting your Navman in a vehicle Use the provided device holder and mount to secure your Navman in your vehicle. The device will turn on automatically when connecting to the external power source. When disconnecting from the external power source, the device will enter a suspended state within 10 seconds automatically. To continue using the device, tap Yes. CAUTION: • Never mount your Navman where the driver’s field of vision is blocked. • If the windscreen is tinted with a reflective coating, it may be athermic and impact the GPS reception. In this instance, please mount your Navman where there is a “clear area” - usually just beneath the rear-view mirror. 1 4 6 8 2 3 5 7 CAUTION: For optimal performance of the lithium battery: • Do not charge the battery where the temperature is high (e.g. in direct sunlight). • There is no need to fully discharge the battery before charging. You can charge the battery before it is discharged. • When storing the product for a long period of time, be sure to fully charge the battery at least once every two weeks. Over discharge of the battery can affect the charging performance. • Failure to follow the battery usage instructions could cause damage to your device, battery and even bodily injury or property damage and will void any warranty. 9 Turning your Navman ON and OFF • For the initial start-up, press and hold the power button for 2 seconds to turn on your Navman. Follow the prompts. The Main Menu will display. Note: The first time you use your Navman, it may take several minutes to establish a GPS connection. When you have a GPS fix, you can start to use your Navman to plan your trip. • To put your Navman in a suspended state, briefly press the power button. When you next turn it on, your Navman will return to the last screen that you used. • To resume using the device, do one of the following: • Press the power button briefly. • Connect the device to an external power source. • To turn off your Navman, press and hold the power button until the device shuts down. Resetting your Navman Occasionally, you may need to perform a hardware reset when your Navman stops responding, or appears to be “frozen” or “locked-up.” Insert a small rod, such as a straightened paperclip (or the stylus that came with the device), into the reset button of your Navman. Your Navman will restart automatically. 10 Connecting your device to the computer 1. Turn on your computer. 2. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug the small end into the mini-USB connector on your Navman. 3. Before disconnecting your Navman from the computer, it is recommended to safely remove the USB drive from the system. This prevents data loss on the device. CAUTION: When your Navman is turned on and connected to a computer, it is recognised as an external mass-storage device. Do NOT delete any files that are pre-installed on your Navman. Deleting the files can cause your Navman to crash. Navman is not responsible for product quality caused by file deletion. 11 Inserting a memory card CAUTION: • Do not apply pressure to the centre of the memory card. • Inserting the card in the reverse direction may cause damage. • Do not insert or remove the memory card when the device is turned on or in the suspend mode. Hold the card (MicroSD) by the edges and gently insert it into the slot as shown in the illustration. To remove a card, gently push the top edge of the card inwards to release it, and pull it out of the slot. Note: Navman does not guarantee the product’s compatibilities with MicroSD cards from all manufacturers. 12 Navigating on the screen To operate your Navman, touch the screen with your fingertip (or the stylus that came with the device). You can perform the following actions: • Tap Touch the screen once with your fingertip to open items or select on-screen buttons or options. • Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. (This is not applicable to all applications.) 13 Main Menu The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to customise your Navman, view saved locations as My Place/Home, and search for POIs nearby, and so on. Note: Main Menu screen options and the order of the options may differ from the above, depending on your region, maps installed or Navman model. Icon Description Search for places, areas and streets to help plan your route. Display the Map screen. Access your saved locations. Configure your Navman to enhance your navigation experience. Search for POIs nearby. 14 Navigating through the menu screens The system provides the Back button ( ) and Main Menu button ( ) in the title bar of the menu screen which allow you to navigate through the menu screens easily. You can: • Return to the previous screen by tapping the Back button. • Return to the Main Menu by tapping the Main Menu button. Note: In some menu screens, the Main Menu button will not appear in the title bar. In this instance, you may have to tap the Back button twice. In some menu screens (such as the map Overview screen), the system provides the tab buttons in the title bar that allow you to enter the additional page in the menu screen. Simply tap the desired tab to change the view. The selected tab will be highlighted as a darker-colour tab. 15 Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabets, numbers, alternate characters and combinations of these. • To select a character, tap the character. . Tap and hold • To delete a character, tap • To enter numbers, tap to delete the entire text. . • To set the keyboard preference from the Keyboard screen, tap preferred keyboard type from the list. 16 . Select the How do I go from A-B? CAUTION: For your safety, enter destination information before you start a journey. Do not enter a destination while driving. How do I use the FIND wizard? Your Navman is equipped with maps that provide street-level details for door-to-door navigation, including POIs such as accommodation, parking areas, petrol stations, railway stations and airports. The FIND wizard allows you to search the location easily. 1. On the Main Menu, tap to display the FIND screen. Note: FIND screen display and the order of the options may vary, depending on your region, maps installed or Navman model. 2. Complete the following: If you want to… Then… search all information on the device - city, streets, named sites, features, landmarks or venues, tap . search for an address, tap . search for a city/area, tap . search for a location from the Map screen, tap . search a location by postcode, tap . search for a POI, tap . Note: For further instructions on searching for a POI, refer to the “How do I search for a POI?” section. 17 How do I plan my first trip? Note: Menu displays may vary, depending on your Navman model. Using your Navman to plan your first trip is easy. There are several ways to select your destination. The following steps will show you how to plan your route by searching the address. Complete the following: If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap . save the location as Home, tap explore the map, tap 18 . . . Then tap . How do I preview the destination on map? After searching an address (or a POI), you can preview the destination on map to explore the area near the location. 1. On the Destination screen, tap the button to display the destination preview map. 2. On the destination preview map, you can: • Tap the / button to zoom in/out the map. • View the information of your destination that is shown at the top of the Map screen. • Tap on a street/area/POI to display the related information of the location near your destination. • Tap the grey arrow icon ( ) to return to your current position on the map. • Drag and then tap on the map to select other destinations. The information of the selected street/area/POI near your destination will be displayed. Tapping the check mark will bring up the Destination screen of the selected location. 19 How do I view my route? The driving map When a route has been calculated (and selected, for some models), the Map screen will display. You will be directed to your destination by spoken and visual instructions. Item Description Direction and distance of The direction and distance to your next turn. next turn Tap to repeat the vocal instruction. Current route Current position Your current route is highlighted. Address bar The current address will be displayed in the text box at the bottom of the screen. Tap to expand and select the following options: Distance and time information Your current position is marked with . • DTG (Distance to Go) • TTG (Time to Go) • km/h or mph (speed) and compass heading • ETA (Estimated Time of Arrival) • Time Note: Depending on your driving route, you may see some icons that provide different information on your Map screen. Please note that these icons will not be always displayed during your journeys. ) on the Map screen. The Speed Limit icon shows the speed For example: the Speed Limit icon ( limit of the current road. If greyed out, you are below this speed limit. When over set limit, you will be warned with an audible and visual warning. How do I change the route configuration? Tap anywhere on the Map screen to bring up the Map options screen, which allows you to change the route-related configuration. For more information on changing the route configuration, refer to the following sections. 20 Note: Map options screen display and the order of the items may vary, depending on your region, maps installed or Navman model. How do I view my route statistics? 1. From the Map options screen, tap . 2. Tap the tabs in the title bar to view the additional information in the different screens. 3. Your Navman provides the information on your: • • • • time to destination distance to go estimated time of arrival distance travelled • time travelled • time stationary • TTD/DTG/ETA for the journey* * Depending on the route calculated, you may see more information on the screen such as the estimated time/distance to the next stop when your trip contains multiple waypoints. How do I adjust the volume? 1. From the Map options screen, tap . 2. The volume buttons will be displayed on the Map screen in translucent mode. Note: The volume buttons will automatically disappear after the map is idled for 5 seconds. 3. Complete the following: 21 If you want to… Then… increase/decrease the volume, tap / . The volume bar indicates the current volume level. mute/unmute, . tap The speaker icon indicates the status: : muted : unmuted How do I zoom in/out the map? 1. From the Map options screen, tap . 2. The zoom buttons will be displayed on the Map screen in translucent mode. Note: The zoom buttons will automatically disappear after the map is idled for 5 seconds. 3. Complete the following: If you want to… Then… zoom in the map, tap and hold . zoom out the map, tap and hold . Advanced routing functions Back-On-Track™ automatic rerouting You will be redirected if you make a wrong turn. A message informing you that your route is being recalculated will display at the top of the screen. from the Map options screen. A warning will display To cancel a route recalculation, tap asking you to confirm the cancellation. If confirmed, both the recalculation and your current route will be cancelled. Parking assistant Note: This feature is not available on all models. You will be reminded of the parking information when you are arriving at the destination icon on the Map screen to show the nearby (within 1 km) of the route. Simply tap the parking lots that are sorted by distance. 22 My Places My Places has all your saved locations. How do I save a location as My Place or Home? 1. Search for an address until the Preview screen is displayed. 2. Tap . The location will be added to My Places. 3. To save the location as Home, tap . The location will be set as Home. How do I navigate to a location I have saved? 1. On the Main Menu, tap . 2. Tap the Sort by button to change the sorting order of the items: : by time : by name : by type 3. Tap the favourite destination you want to travel to. 4. Tap . Your Navman will calculate a route from your current location. 23 How do I navigate to Home? If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to search for an address using the address-entry wizard. 1. On the Main Menu, tap . 2. Tap . 3. Tap . Your Navman will calculate a route from your current location. How do I navigate to a recent place? To make navigating to a location easier, your Navman will automatically save all your start locations and destinations in a list of recent places. 1. On the Main Menu, tap 2. Tap . . 3. Tap a recent place. 4. Tap . Your Navman will calculate a route from your current location. How do I edit a saved location in My Places? 1. On the Main Menu, tap . 2. Select a location to edit. 3. Tap . 4. Complete the following: 24 If you want to… Then… save the location as Home, tap . rename the location, tap . After you have edited the name, tap OK. delete the location, tap . How do I search for a POI? A POI (Point of Interest) is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums. You can search for the nearest POIs by using Near Me. How do I find the nearest POIs using Near Me? Near Me services allow you to quickly search the local area for common types of important POIs. Search for the nearest restaurants, cafes, fast-food premises and other dining establishments. Search for the nearest petrol stations. Search for the nearest parking places. Search for the nearest hotels and motels. Search for the nearest banks and ATMs. Search for the nearest emergency services, including hospitals and police stations. 1. On the Main Menu, tap . 2. Select the desired POI category. 3. Tap or to scroll up or down the result list. 4. Select the desired item to display the destination screen. 5. Complete the following: If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap . . 25 If you want to… Then… explore the map, tap . How do I search for a POI by type? 1. On the Main Menu, tap 2. Tap . . 3. Complete the following: If you want to… Then… search for the POIs near your current location, tap . search for the POIs in a specified city or area, tap . After you have entered a name of a city/area, tap OK. search for the POIs on your route, tap search for the POIs near your destination, tap . . 4. Complete the following: If you want to… Then… search for POIs by keyword, tap . After you have entered a keyword, tap OK. search for restaurants, cafes, fast-food premises and other dining establishments, tap . search for petrol stations, tap . search for parking places, tap view more POI types, tap search for hotels and motels, tap search for banks and ATMs, tap . search for emergency services, tap . 5. Tap the desired item from the list. 6. Complete the following: 26 . and select a POI type. . If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap explore the map, tap . . . How do I search for a POI by Smart Find Keyword? Complete the following to navigate to a POI or the street address that you find by keyword. 1. On the Main Menu, tap 2. Tap . . Enter the keyword of the POI or street address that you want to search. 3. Complete the following: If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap explore the map, tap . . . 27 Customising the system settings Note: Depending on your Navman model, certain features and setting options may not be available. There are various customisation options available to enhance your navigation experience. 1. On the Main Menu, tap . 2. Select the option you want to customise. 3. Once you change the settings and return to the previous screen, your preferences are automatically saved. Note: While changing the settings, the checkbox next to the option indicates the setting status: : on/enabled : off/disabled Audio If you want to… Then… increase/decrease the volume, tap / . Note: You can simply tap on the volume bar and the volume will be set immediately at the position you tapped. The volume bar indicates the current volume level. mute/unmute, tap . The speaker icon indicates the status: : muted : unmuted hear the tapping sound when you tap an item on the touch screen, tap Touch audio to turn it on. Screen If you want to… Then… change the displayed screen mode, tap Screen mode and select: • Auto: set to automatically change between Day and Night modes. • Day: set the screen to be displayed in Day mode. • Night: set the screen to be displayed in Night mode. 28 If you want to… Then… change the screen brightness in day/night tap mode, bar. / on the Day brightness/Night brightness The brightness bar indicates the brightness level. Note: You can simply tap on the brightness bar and the screen brightness will be set immediately at the position you tapped. Note: Your Navman can heat up when the brightness scale is set high, therefore, use lower brightness whenever acceptable. Safety If you want to… Then… enable/disable the warning message after long-distance driving, enable/disable speed limit alerts, which warn you of the speed limit on any given road, enable/disable speed limit alerts, which warn you of the speed limit on any given road, tap Driver fatigue alert to turn it on or off. tap Speed limit display to turn it on or off. tap Speed limit alerts and select: • Off: disable the speed limit alert. • Auto: set the system to alert automatically while your speed is above the limit. • Speed limit + 5 km/h (+ 3 mph): set the system to alert while your speed is 5 km/h (3 mph) or more above the limit. set the speed limit alerts manually, enable/disable a visual warning if the screen is accessed in a moving vehicle, set how you want to receive the camera and safety alerts, • Speed limit + 10 km/h (+ 7 mph): set the system to alert while your speed is 10 km/h (7 mph) or more above the limit. tap Set manual speed alert to select the speed limit or turn it off. tap Warn me not to operate my Navman while driving to turn it on or off. tap Speed Camera / Average Speed Camera / Red Light Camera / Accident Black Spot / School Zone / Railway Crossing to select: • No alerts • Visual alert • Visual & audible alerts 29 Route options If you want to… Then… set route type options for your route, tap Route type to select your route type preference from the list: • Fastest: The route that should be the fastest when navigating. • Economical: The route with least number of stops, turns and urban areas which should save on fuel usage. • Easiest: The simplest route with the least number of turns and favours motorways where appropriate. This is the default route type. set types of road options for your route, • Shortest: The route with the shortest physical length. tap Types of road. Select your road preference from the list. Note: Avoiding ferry routes may prevent you from navigating between certain countries, even when a bridge or tunnel exists. display the installed custom POI, display the landmarks on your route, tap Custom POI alerts. tap Landmark guidance to turn it on. Note: This feature is not available on all models and is only available in selected countries. Map display If you want to… Then… enable/disable automatic zooming during navigation, tap Auto-zoom map when navigating to turn it on. When selected, the Map screen will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. display “no entry” icons on “no entry” roads on the Map screen, tap Show no-entry road signs to turn it on. set your Map screen preference, tap Map to select between a 3D or 2D view of the Map screen. change the map colour scheme, tap Map scheme, then select a colour scheme from the list. 30 When turned on, the map display performance can slow down due to the number of no entry roads in some major cities. My Maps If you want to… Then… view the map information, tap Map version to display a list of all maps and the detailed information. select a set of maps to load, tap Map set, then select your preference from the list. This may not be available in all regions. check the expiring maps, tap Expiring maps to display a list of maps that are to expire soon. Language If you want to… Then… change the on-screen language, tap Language and select your preferred language from the list. change the voice scheme, tap Voice and select your preferred voice scheme from the list. Note: The available settings of the Voice option can be customised by adding/deleting the voice file through NavDesk when your Navman is connected to the computer. For more information, refer to the "My Navman" section in “What is NavDesk?” Units If you want to… Then… change the distance units, tap Distance units and then select your preferred distance unit type. change the time format, tap Time format and then select your preferred time format. change the date format, tap Date format and then select your preferred date format type. Time Zone If you want to… Then… set the time zone automatically, select Auto time zone. change the time zone manually, select Manual time zone, then adjust the setting by / . tapping 31 Device If you want to… Then… delete the saved information on your Navman, tap Delete saved information: • Tap Delete My Places and tap Yes when the warning dialog box displays. The data saved in My Places will be deleted. • Tap Delete recent locations and tap Yes when the warning dialog box displays. The data of recent locations will be deleted. restore factory default settings, tap Restore factory defaults. When the warning dialog box displays, tap Yes. Your Navman will restart. This option allows you to restore default factory settings; the recent locations, saved My Places destinations and My Drive profile on the device will be deleted. reset the GPS, tap Reset GPS. When the warning dialog box displays, tap Yes. Note: Occasionally, the GPS fix may need to be reset. This may occur if the receiver has been transported a long distance since last being used; for example, to a different country, and is still trying to establish the previous position. record a GPS log of your trip, tap GPS logging to turn it on. Demo If you want to… Then… enable a shop demonstration of the navigation feature to be played, select a demonstration country from the list and tap Start.Tap OK. Your Navman will restart. When your Navman is in Shop demo mode, you will see the navigation demonstration of the pre-defined route without having to set a destination. Note: You cannot operate your Navman properly in Shop demo mode. enable the screen saver feature on your Navman, tap Screen Saver Video. When your Navman is idle for 10/30/60 minutes, the screen saver will display. Note: This feature is not available on all models. 32 Help If you want to… Then… view the tutorial, tap View Tutorial. To display the tutorial on each startup, select the Show tutorial on start-up option on the initial screen of tutorial. view copyright and trademark information, tap About. 33 What is NavDesk? NavDesk is a suite of tools you can use to access greater functionality and product information via your computer. NavDesk allows you to: • obtain software updates • manage maps • search online for local POIs • manage custom POIs • manage safety camera subscriptions • browse the Navman website for special offers Can I use NavDesk with my computer? Ensure your computer has the following minimum system requirements before installing NavDesk: • IBM compatible PC or Mac computer • Windows Vista, Windows 7, Windows 8, or Mac OS X and above • Internet Explorer 6 and later versions, or Safari • DVD drive • USB port • Internet connection for activation Note: Microsoft .NET 2.0, 3.0 and 3.5 will be installed on your computer as part of the installation of NavDesk. How do I install NavDesk onto my computer? 1. Close all programs on your computer. 2. Insert the NavDesk Application Installer DVD into your computer DVD drive. The NavDesk installer will start. 3. Select your preferred language. 4. Click Install Software, then Install NavDesk. 5. Follow the on-screen prompts to install NavDesk: 6. Connect your Navman to your computer when prompted. 7. Turn on your Navman, and then select the Computer option from the pop-up message screen. Note: If prompted to update your Navman software, follow the on-screen prompts. 34 8. You are now ready to use NavDesk for your Navman. From now on, you can access NavDesk via: Start All Programs Navman NavDesk. Note: Once your Navman is connected and the system retrieves the device’s data from the server, the First Use Date (FUD) information will be displayed in the status bar (at the bottom of the NavDesk window). Note: Not all features and setting options are available on all models or in all countries. Name Description PC Mac Navman Online Display the Navman website, Navman Store and other online features. √ √ My Subscriptions Information on your current subscriptions, including safety camera subscriptions. √ √ My Maps Install and manage maps. √ √ Custom POIs Application that allows you to import custom POIs. √ √ Image Search Search online and download images of locations that contain embedded GPS coordinates that you can navigate to. √ Note: This feature is powered by Flickr™. Unlock Features Allow you to enter the activation key for the service you purchased. √ √ Redeem Allow you to enter the product key for the lifetime map update service. √ √ Note: This feature is not required for selected models. My Places View and modify all places including addresses, POIs and others added using NavDesk and stored on your Navman. √ MY Navman A collection of applications that allow you to configure NavDesk, download updates, and transfer data to and from your Navman. √ √ 35 My Subscriptions NavDesk My Subscriptions Your Navman contains pre-loaded subscriptions, such as safety camera information. For the latest subscription updates, visit www.navman.com.au (Australia) or www.navman.co.nz (New Zealand). Note: Safety camera alerts can be enabled to provide warnings when on the route. How do I purchase a subscription? 1. Select a type of subscription. 2. Select a region. 3. Select a subscription or offer, then click Purchase an activation key from the Navman store. 4. Follow the prompts to purchase your subscription. A product key will be sent to you via email when you have subscribed. You will need to use this product key to activate your subscription. How do I activate my subscription? NavDesk Unlock Features 1. Enter your product key. 2. Follow the prompts to activate your subscription. How do I update subscriptions on my Navman? The My Subscriptions section will display a list of subscriptions already installed on your Navman: 36 Icon Description Red Expired subscriptions. Right-click to purchase a new subscription. Yellow Available subscriptions. Right-click to update and purchase a new subscription. Green Active subscriptions. Note: No updates are available for these subscriptions. How do I recover my subscription? If your subscriptions are deleted and you want to recover them, click Recover Subscriptions at the bottom-right corner in My Subscriptions to recover all subscriptions. My Maps NavDesk My Maps My Maps allows you to install new maps, remove maps from your Navman and purchase new maps. Note: The downloaded/purchased map (*.iso) from Navman Store website will be saved on your computer’s map folder (e.g. C:\username\Documents\Maps) and then displayed in My Maps. The default map folder may vary depending on your operating system. Name Description Loadable Maps A list of maps on the DVD or available for purchase via the Navman Store website. My Navman Remove map A list of maps installed on your Navman. Click to remove the selected map from your Navman. 37 How do I install maps onto my Navman? Your Navman comes with one or more pre-activated maps. Map files take up space on your Navman’s internal memory. If you do not use a map file, you can remove it to free up space. You can later reinstall it to your Navman if required. You can install maps from the following: • DVD that came with your Navman You may need to purchase a Map Product Key to activate maps on the DVD that came with your Navman. • The downloaded map update For more information on downloading the free map update, refer to the “How do I update my Navman?” section. • The map that you have purchased separately on a memory card or your Navman internal memory 1. Open NavDesk, and then click My Maps. 2. Select a map source and then click Open to display the Map Source section. • The maps already installed on your Navman are green. • The maps that are unlocked and ready to be installed to your Navman are yellow. • The maps that require activation before being installed to your Navman are red. • The maps that are available for purchase from Navman are blue. Note: If your computer opens Windows Explorer when the DVD is inserted, close the Windows Explorer window. 3. Complete the following: If the map to be installed is… Then… Yellow go to step 6. Red the map needs to be activated via the Internet before it can be installed; continue to step 4. 4. If you connect to the Internet via a dial-up connection, connect to the Internet now. 5. Follow the prompts to activate your Map Product Key, including: • Enter the Map Product Key when prompted. • Your computer will connect to the Internet and activate your Map Product Key. • When activation has completed, the map will change colour to yellow; continue to step 6. 6. Click the map you want to install to your Navman. The map will change colour to a brighter yellow to indicate it has been selected. To deselect a map, click the map again. Note: You may need to install multiple maps to cover the required geographical area. Please visit www.navman.com.au/map-installation/key/main.html and www.navman.com.au/mapinstallation/auto/main.html for more information. 38 7. Complete the following: If you want to… Then… install a yellow map, go back to step 6. install a red map, the map needs to be activated via the Internet before it can be installed; go back to step 4. install the selected maps to your Navman, continue to step 8. 8. Select the destination media (Navman internal memory) for the selected maps, then click Install Maps. The selected maps will be installed and change colour to green. Do not disconnect the USB cable until the installed map or maps have changed colour to green. 9. To use your Navman, disconnect the USB cable. You may need to manually reset your Navman. How do I remove maps from my Navman? 1. Open NavDesk, and then click My Maps. 2. From the My Navman panel, select the checkbox next to the map you want to remove. 3. Click Remove Maps to remove the selected maps. 4. Confirm that you want to remove the selected map when prompted. The map is removed from your Navman. You can reinstall these maps at any time via NavDesk. Custom POIs NavDesk Custom POIs 39 The Custom POIs application allows you to create or import your own POI files. These are called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Navman and can have audio as well as visual alerts associated with them. To create your POI files, open Microsoft Excel and then enter the POI location details (including the longitude, latitude, name, and description) in separate cells. Always use decimal degrees for coordinates and start a new location from a new line. When done, click File Save As to save it as a *.csv file. Now you have successfully created a POI CSV file. The following displays the example of creating the POI file by using Microsoft Excel: Note: Various POI files are available for free download or by subscription from third-party websites. Ensure that downloaded files are in .csv (Comma Separated Values) format. Navman is not responsible for the content or accuracy of the information or the reliability or availability of these websites. The use of information regarding safety camera locations may be subject to local laws in the country of use. You are responsible for checking that you can use the information in your country or in the country where the information will be used. How do I install custom POIs? 1. In the Add new POIs section, click Browse to select a source file. 2. Select the file from your local or network drive, then click Open. 3. From the POI Category section: If you want to… Then… use an existing custom POI category, select Existing category, then select a type from the drop-down list. replace an existing POI, select Existing category and a type from the dropdown list, then select Replace existing POIs. Note: If you want to create a new POI instead, then select Add to existing POIs. create a new custom POI category, select New category, then type a name for the POI category. 4. Set alert settings as required: 40 If you want to… Then… enable a visual warning when a POI of this category is in close proximity, select the Visual alert checkbox. If you want to… Then… select an icon to display on the Map screen for POIs of this category, click Browse to select the icon file from your local or network drive. • When you have located the icon file, select it and click Open. • The icon file must be a bitmap (*.bmp or *.png) graphic with a minimum size of 6x6 pixels and a maximum size of 32x32 pixels. Note: If you do not select a custom icon, a default icon will display. select the distance from a POI of this category at which the visual warning should display or the warning chime should sound, select the distance from the Distance box. Note: To change the units used to measure the distance for this POI category, click My Navman Options and from the General option select Use metric units checkbox. enable a warning sound when a POI of this category is in close proximity, select the Audio alert checkbox. select a custom sound alert file to play when a POI of this category is in close proximity, do one of the followings: • Select a sound file from the list. • Click Add to select a sound file (.WAV format) from your local or network drive. When you have located the file, select it and click Open. Note: If you do not select a custom sound file, a default sound alert will play. 5. Click Add to device to add the POI to your Navman. Note: Each file corresponds to a POI category; for example, Hotels.csv will be listed on your Navman as the Hotels category. How do I delete a custom POI file/category from my Navman? 1. In the Installed POIs section, click Delete next to the file name. The file is removed from the list, but is not yet deleted. 2. Accept the warning message. The selected file/category is deleted. Image Search NavDesk Image Search 41 Image Search is a NavDesk application powered by Flickr™ allowing you to download photos that contain embedded GPS coordinates. You can then upload the photo to the Flickr website, transfer photos to your Navman, or export pictures to Google Earth. How do I search for a photo with embedded GPS coordinates on the Internet? 1. In the Description field enter a search description for the image you are looking for. 2. Select one of the Sort by options. 3. Click Search. Thumbnails of the photos with embedded GPS coordinates will be displayed in the display area. Note: You can narrow your search by selecting the Advanced search checkbox and then selecting a city from the drop-down list or by entering the latitude and longitude details. How do I import a photo with embedded GPS coordinates to My Places? 1. Select a picture or group of pictures you want to add to your My Places. 2. Do one of the following to add the selected image to My Places: • Click the Add to My Places button. • Right-click on the selected picture and then select Add to My Places. Unlock Features NavDesk Unlock Features 42 If you have purchased a map unlock code or subscriptions for your Navman, you have to enter the activation key using the Unlock Features application. Note: Make sure you have an active Internet connection for this feature. Note: The activation key will be sent to you by email. You can click the provided link to purchase an activation key online. Redeem NavDesk Redeem To redeem Navman’s lifetime map update service, you need to enter the product key using the Redeem application. Please note that the product key can only be used once and is not transferable. Note: Make sure you have an active Internet connection for this feature. 43 Note: This feature is not required for selected models. My Places NavDesk MY PLACES My Places includes saved addresses, captured journeys, POIs, photos with embedded GPS coordinates, and other locations. You can select, modify and delete places. You can also add locations from Image Search to My Places. Note: Make sure you have an active Internet connection for this feature. Note: You can install a maximum of 99 locations on your Navman via My Places. How do I sort My Place locations? You can sort My Place locations by type and name: If you want to… Then… sort My Place locations by type, click Type on the My Places panel. sort My Place locations by name, click Name on the My Places panel. How do I import or export a location? Complete the following: If you want to… Then… import a location from the computer from the My Places panel, click Import. to your Navman, Locate the file you want to import and then click Open. Note: The supported file format for importing includes: *.KML and *.KMZ. 44 If you want to… Then… export a location from your Navman from the My Places panel, select a location and then click to the computer, Export. Enter a descriptive name for the file and then click Save. Note: The supported file format for exporting includes: *.KMZ. Note: You can aslo import or export a location by clicking File Import (or Export) My Places. How do I edit a location from the map screen? 1. From the My Places panel, select the location you want to edit. 2. Click the location icon on the map. 3. Complete the following: If you want to… Then… edit the location name, click the location name. Enter a new name or edit the existing name. The location name is changed in both NavDesk and your Navman. edit the location notes, click Edit notes. Enter notes. The location notes are changed in both NavDesk and your Navman. share the location, . click An email will open ready to send to your friends. Your friend will receive the email with links to either save the image or to save the location in My Places in NavDesk. Note: If the location is a photo with embedded GPS coordinates, your friend will receive the image as an attachment to the email. Note: If the location is a captured journey, your friend will receive the journey as a *.KMZ file attached to the email. Your friend will need to have Google Earth installed on the computer to view the KMZ file. delete the location, click , then click Yes to delete the location. Note: You can delete all locations in My Places by clicking Delete on the My Places panel. export the location, click . Enter a descriptive name for the file and then click Save. 45 My Navman NavDesk MY Navman How do I change the displayed language for NavDesk? 1. Click Language. 2. Select your preferred language. How do I install or remove a voice file for my Navman? 1. Click My Voices. 2. Complete the following: If you want to… Then… install a voice file, in the Available voice files section, select the voice file you would like to install. Click Install selected voices. remove a voice file, in the Available voice files section, select the voice file you would like to remove. Click Remove selected voices. Note: Voice files take up space on your Navman’s internal memory. If you do not use a voice file, you can remove it to free up space. You can later reinstall it to your Navman if required. The provided DVD of your Navman is needed while installing the voice file. How do I register my Navman and set a PIN? PIN is a NavDesk application that allows you to set a security PIN on your Navman. The PIN will disable your Navman in the event of theft. To set a PIN, you must first register your Navman on Navman’s website. 1. Click PIN. 2. Click Register now and follow the prompts to complete the registration form online. 3. When the registration is complete, click I have registered my Navman. 4. In the User Name and Password fields, enter the username and password that you have entered when registering online. 5. In the PIN field, enter the PIN you want to assign to your Navman. Your PIN must be between four and eight numerical digits. 6. Click OK. The PIN for your Navman has been set. You will be required to enter your PIN when you turn on your Navman. 7. To disable or change the PIN on your Navman at a later time, enter the Username and password to enter the PIN screen. Then do one of the following: 46 • Leave the PIN field blank and click OK. The PIN is removed and your Navman will no longer require you to enter a PIN. • In the PIN field, enter a new PIN you want to assign to your Navman. The new PIN for your Navman has been set. How do I backup and restore my Navman? You can save backups of data from your Navman, and later restore it if required. 1. Click Backup and Restore. 2. Complete the following: If you want to… Then… backup your Navman, click Create new backup. Select the data you would like to backup, then click OK. The backup will be saved to your computer. The backup will be listed on the Backup & Restore window. restore a backup to your Navman, select the backup from the list that you would like to restore. Click Restore, then click OK. The backup will be restored to your Navman. delete a backup, select the backup from the list that you would like to delete. Click Delete, then click OK. The backup will be deleted. How do I recover maps and voice files for my Navman? The Smart Recovery application allows you to recover all data to fix your Navman if a problem occurs during operation, including software, maps, voice files, and subscriptions. 1. Make sure you have an active Internet connection and the Installer DVD is inserted into your computer DVD drive. 2. Click Smart Recovery. 3. The available data will be displayed in the Maps and Voices fields. Select the desired data and click Recover to recover the data on your Navman. How do I update my Navman? Occasionally Navman may offer you free updates, including software applications, maps, and more. You can check the available updates via the Device Updates function. 1. If a free update is available and your Navman is connected to your computer, a message will display when you start NavDesk. 47 From the pop-up message window, click View to display the Device Updates screen that contains the available updates. Note: You can also open the Device Updates screen by clicking the New Update button at the top-right corner of NavDesk. Note: In some certain updates, you must upgrade your system to the latest version (including the NavDesk and your Navman) before you can use the updates. If the new version is detected, a message will display to ask you to upgrade the system. When prompted, click Yes to start upgrading the system. 2. Complete the following: If you want to… Then… download the updates, select the available update from the list, and then lick Download. stop/pause the download, during the download: • Click to stop the download. • Click to pause the download; when paused, click to resume downloading. change the download folder, click Change Path. 3. When completed, the downloaded file will be saved to the assigned folder. • For software update, the *.exe file will be launched automatically to install the update. • For map update, the system will display the My Maps screen automatically to install the update. How do I recover keys on my Navman? The Recover keys application allows you to fix your Navman if a problem occurs during operation. Click the Recover keys option in the menu and then follow the prompts to complete the process. How do I configure NavDesk? 1. Click Options, and then select the desired setting options to configure. 2. Complete the following: If you want to… Then… keep NavDesk updated, click General, and then select the Auto check for updates checkbox. When you select this option, every time you open NavDesk, the available service packs and bug fixes will be downloaded from the Navman server and applied to your Navman. 48 If you want to… Then… change the units of measurement that NavDesk uses, click General, and then: • Select or clear the Use metric units checkbox to change between imperial and metric units. • Select or clear the Use decimal degrees checkbox to change between decimal degrees and latitude/longitude coordinates. change the location of where downloaded updates will be saved, click My Maps, and then click Change. Select a folder for the updates. The downloaded updates are moved to the new location. 49 Reference About GPS and signal reception The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location. Although a GPS receiver can detect signals from up to 12 satellites at any time, only four signals are required to provide a position or "GPS fix" (latitude and longitude), for vehicle navigation systems. Your Navman receives GPS signals via the internal GPS antenna. To guarantee the optimum GPS signal strength, ensure your Navman is outdoors, or in a vehicle outdoors, and has an unobstructed view of the sky. GPS reception is not usually affected by weather, however, very heavy rain or snow may have a negative effect on your reception. Caring for your Navman Taking good care of your Navman will ensure trouble-free operation and reduce the risk of damage to your Navman: • Keep your Navman away from excessive moisture and extreme temperatures. • Avoid exposing your Navman to direct sunlight or strong ultraviolet light for extended periods of time. • Do not place anything on top of your Navman or drop objects on your Navman. • Do not drop your Navman or subject it to severe shock. • Do not subject your Navman to sudden and severe temperature changes. This could cause moisture condensation inside the unit, which could damage your Navman. In the event of moisture condensation, allow your Navman to dry out completely before use. • The screen surface can easily be scratched. Avoid touching it with sharp objects. Nonadhesive generic screen protectors designed specifically for use on portable devices with LCD panels may be used to help protect the screen from minor scratches. • Never clean your Navman when it is turned on. Use a soft, lint-free cloth to wipe the screen and the exterior of your Navman. 50 • Do not use paper towels to clean the screen. • Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly, modification or any attempt at repair could cause damage to your Navman and even bodily injury or property damage and will void any warranty. • Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your Navman, its parts or accessories. • Do not expose your device to direct sunlight in an unattended vehicle for prolonged periods. Overheating may damage the unit. • To discourage theft, do not leave your device, mounting bracket or any cables in plain view in an unattended vehicle. Troubleshooting If you encounter a problem you cannot solve, contact an authorized service centre for assistance. Problems Solutions The unit is not turning on/charging. Try to charge the unit through a USB cable connected to a computer. If the unit charges then the issue is with the in-car charger. If the unit still fails to charge, then the fault is with the unit. Contact technical support and an RMA will be created to fix the unit or replace the in-car charger. I can not get a GPS signal. Make sure you are stationary and have a clear line of site to the sky. If this fails to resolve the issue, please reset the GPS chip through the Settings menu of your unit. If the fault is still not resolved, please visit our self help site (see the information from "Navman customer support" section), or contact our technical support team. My unit is always showing The units are set at a manual speed that the speed limit is 110 limit defaulted at 110 kph. This can be kph even when it is not. changed through the "Safety" section of your Settings menu. If the fault is still not resolved, please visit our self help site (see the information from "Navman customer support" section), or contact our technical support team. Where is my product key? I want to activate my unit. If the fault is still not resolved, please visit our self help site (see the information below), or contact our technical support team. There is no need to activate your unit in any way. This Activation tab within the NavDesk software is for subscriptions, travel books, international maps and map upgrades only. Your unit will work straight out of the box and there is no need to activate it in any way. 51 For more information Online support For 24/7 help and support with Navman products, visit our Technical Support Website: www.navmansupport.com.au (Australia), or www.navmansupport.co.nz (New Zealand). Navman customer support If you have a faulty product or you would like to speak to a member of our Technical Support team, contact: Australia: 1300 NAVMAN (1300 628 626), or visit www.navmansupport.com.au New Zealand: 0800 GO NAVM (0800 466 286), or visit www.navmansupport.co.nz Speed limit Navman products are designed to be used as an aid to safer driving. Navman does not condone speeding or any other failure to comply with your local traffic laws. It is your responsibility to drive within the posted speed limit at all times and to drive in a careful manner. Navman accepts NO liability whatsoever for you receiving any speeding fines or points on your license through using this device. Navman does not guarantee the accuracy of the data contained within this database either expressed or implied. In the event you receive a fine or any other penalty for speeding or contravention of any traffic law, or are involved in an accident, Navman is not responsible for any damages of any type. In some countries the data information regarding speed limits may conflict with local law and/or regulations. It is your responsibility to make sure that your use of the data is in compliance with local laws and/or regulations. Usage is at your own risk. Safety camera POIs Navman products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Navman does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed. Navman does not condone speeding or any other failure to comply with your local traffic laws. It is your responsibility to drive within the posted speed limit at all times and to drive in a careful manner. Navman accepts NO liability whatsoever for you receiving any speeding fines or points on your license through using this device. Navman does not guarantee the accuracy of the data contained within this database either expressed or implied. In the event you receive a fine or any other penalty for speeding or contravention of any traffic law, or are involved in an accident, Navman is not responsible for any damages of any type. In some countries the data information regarding safety or speed cameras may conflict with local law and/or regulations. It is your responsibility to make sure that your use of the data is in compliance with local laws and/or regulations. Usage is at your own risk. 52 POI categories Icon Description Airport Icon Description Amusement park Art centre ATM/Cash dispenser Bank Bar/Pub Beach Breakdown service/Car repair facility Bowling centre Business facility or company Business office Bus station Camping ground Car dealer/Automobile dealer Casino Cemetery Church Cinema City hall City, town or village Coffee shop College/University Community centre Commuter railway station Courthouse Dentist Doctor Embassy Exhibition centre Ferry terminal Fire Brigade Golf course Government office Grocery store Guest house Higher education Hospital/Polyclinic Hotel Ice skating Important tourist attraction Information/Tourist information office Library Marina/Yacht basin Medical Monument Motorcycle dealer Motoring organisation office Mountain pass Museum Music centre Natural attraction Nightlife Park and ride Parking 53 Icon Description Parking garage Icon Description Park/Recreation area Performance art/Theatre Petrol station Pharmacy Place of worship Police station Post office Public restroom/Toilet facilities Public sport airport Railway crossing Rental car agency Rest area Restaurant Road accident black spot Scenic/Panoramic views School School zone Shop Shopping Ski resort/Ski lift station Speed check Sport centre Sports hall Sports complex Stadium Tennis court Travel agency Transport ferry Veterinarian Winery Zoo Note: The POI categories and the order may differ, depending on your region, maps installed or Navman model. Branded POIs Branded POIs are available on some maps. These include well known restaurants, accommodation providers, tourist attractions, Petrol stations, etc. The icon will usually display the company logo. POI categories by subscription Icon Description Safety Cameras Safety Camera (Mobile) Safety Camera (Average) Red Light Camera Combine Camera 54 My Places categories Icon Description Home Saved locations 55 Revision: R00 (12/2016) Trademarks All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and documents are subject to change without notice. Notes Not all models are available in all regions. Depending upon the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. The screenshots and other presentations shown in this document are for reference only. They may differ from the actual screens and presentations generated by the actual product. 56
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Advanced routing functions like Back-On-Track™ automatic rerouting and Parking assistant
- Lets you save your favorite places as My Places for quick and easy access
- Finds the nearest POIs using Near Me, or search by type or keyword
- Customizable settings to tailor the device to your preferences
- Comes with pre-installed maps and offers subscription options for additional coverage
- Bright and clear display for easy viewing
Related manuals
Frequently Answers and Questions
How do I get started with my Navman MOVE75?
Refer to the Getting to know your Navman section of the user manual for instructions on mounting your device, turning it on, and connecting it to your computer.
How do I plan a trip?
Use the How do I go from A-B? section of the manual for step-by-step instructions on planning your first trip.
How do I search for a specific location?
Refer to the How do I use the FIND wizard? section of the manual for instructions on searching for a location by address, POI, or coordinates.
advertisement