Toro 24V Battery Pack Attachment Operator's Manual
Add to My manuals2 Pages
Toro 24V Battery Pack: power up your gardening tasks with this reliable and efficient energy source. Designed for Toro 24V battery-powered tools, this battery pack delivers consistent performance and long-lasting power. Enjoy the freedom of cordless operation and tackle your gardening projects with ease. Its quick-charging capability minimizes downtime, allowing you to get back to work faster. Experience the convenience and efficiency of Toro 24V Battery Pack, the perfect companion for your outdoor power equipment.
advertisement
![Toro 24V Battery Pack Attachment Operator's Manual | Manualzz Toro 24V Battery Pack Attachment Operator's Manual | Manualzz](http://s3.manualzz.com/store/data/052638297_1-efae142d5448943184490388d877d367-360x466.png)
Form No. 3371-424 Rev A
24V Battery Charger
Model No. 88503
Model No. 88504
Model No. 88505
Charging the Battery Pack
1. Turn the battery upside down and line up the battery
terminal with the slot in the charger (Figure 1 and
2
3
Operator's Manual
2
1
1.
LED indicators
G017407
Figure 1
2.
Insert battery here
LED COLOR
Left
Red
Red
Red
Red
Red (blinking)
Right
Red
Green
Orange
Green
Red (blinking)
G016223
1.
LED indicators (level of charge)
2.
Release button
Figure 2
3.
Battery terminal
2. Slide the battery into the charger until it clicks into place.
3. To remove the battery, press down on the release button and slide the battery backwards out of the charger.
4. Refer to the table below to interpret the LED indicators on the battery charger.
Indicates:
Battery is charging
Fully charged
Battery is too warm: Remove for approximately 30 minutes
No battery present
Defective battery
1
© 2011—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in China
All Rights Reserved
Inserting the Battery into the
Trimmer
1. Align the tongue of the battery pack with the cavity
in the handle housing (Figure 3).
1
2
1.
Cavity
2.
Tongue
G016329
Figure 3
Hedge trimmer handle shown
3.
Latch
3
2. Grasp the trimmer handle.
3. Push the battery pack into the handle until the latch locks into place.
Important: The battery pack is not fully charged when it is purchased. Before using the trimmer for the first time, place the battery pack in the charger and charge it until the LED indicators turn green. Make sure to read all safety precautions. With regular use, it will need shorter charging time. If storing for a prolonged period of time, remove the battery. When ready to use again, charge the battery pack until the
LED indicators turn green.
Battery Pack Preparation For
Recycling
WARNING
Upon removal, cover the battery pack's terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove any of its components. Lithium-ion batteries must be recycled or disposed of properly at the nearest battery recycling facility.
2
advertisement
Related manuals
advertisement