RIVA RC3502HD-5211IR Installation Guide
Add to my manuals
30 Pages
Riva RC3502HD-5211IR is a full HD outdoor fixed IR dome IP camera that offers high-quality video streaming, advanced image processing, and various connectivity options for flexible surveillance solutions. With its vandal-proof design, it can withstand harsh weather conditions, making it suitable for both indoor and outdoor applications.
advertisement
1
RC3502HD-5211IR
Installation Guide www.rivatech.de
2
INFORMATION TO USER
CAUTION
RISK OF ELECTRIC SHOCK,
DO NOT OPEN
!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
CONTACT QUALIFIED SERVICE PERSONNEL FOR INTERNAL
PARTS.
!
This symbol is intended to alert the user the presence of uninsulated “dangerous voltage” within the product’s enclosure, which may be sufficient magnitude to constitute a electric shock risk to persons.
This symbol is intended to alert the user the presence of important operating and maintenance (servicing) instructions within the guide manual. www.rivatech.de
3
Table of Contents
1. FEATURES ................................................................................ 5
2. PACKAGE CONTENTS ................................................................. 7
3. PART NAMES ........................................................................... 8
4. INSTALLATION ........................................................................ 10
4.1. Installation Template .................................................................... 11
4.2. Setting the Lens Position .............................................................. 12
4.3. Setting the Image Attribute ........................................................... 13
5. CONNECTIONS ........................................................................ 14
6. CONFIGURATION...................................................................... 18
6.1.Set up network environment .......................................................... 18
6.1.1. Generic IP Environment .......................................................... 18
6.1.2. Custom IP Environment .......................................................... 19
6.2. View video on web page ............................................................... 20
6.2.1. View video using IPAdmin Tool ................................................. 22
6.4. Factory Default ........................................................................... 23
APPENDIX (A): SPECIFICATIONS ..................................................... 25
Electrical Characteristics ..................................................................... 26
Environment Condition ........................................................................ 26
Mechanical Condition .......................................................................... 26
APPENDIX (B): POWER OVER ETHERNET ......................................... 27
Power classification ............................................................................ 27
APPENDIX (C): DIMENSIONS .......................................................... 28
www.rivatech.de
4
APPENDIX (D): HEXADECIMAL-DECIMAL CONVERSION TABLE ............. 29
REVISION HISTORY ....................................................................... 30
www.rivatech.de
5
1.FEATURES
Camera
Full HD outdoor fixed IR dome IP camera (Vandal proof)
High quality compression in real time streaming
1/2.7” High Quality CMOS Image Sensor
True Day / Night (ICR)
Improvement of color rolling suppression
30 IR LEDs
Streaming
Dual streaming mode (such as different codec/resolution/bit rate and so on.) *
Burnt-in text supported
Unicast/Multicast supported
Video/Audio
Video compression: H.264/MJPEG, up to 30FPS@1080p*
Audio compression: G.711(µLaw, aLaw)/PCM
Analog video out for external monitors (for installation only)
Video motion detection supported
Two-way mono audio supported
Network
RTSP/ HTTP protocol supported
10/100 Base-T Ethernet www.rivatech.de
6
Additional Features
Micro SD card support
PoE support (Camera and Fan)
Built-in Video Content Analysis
Internal fan and heater (heater function only with external power supply)
IP66 certified
SDK (Software Development Kit) provided
* When VCA is activated, frame rate is limit to max15fps@1080p. Limitations are based on V.1.5.0 firmware release and could be changed without notice. www.rivatech.de
7
2. PACKAGE CONTENTS
Unpack carefully and handle the equipment with care. The packaging contains:
Camera DC power adaptor
DC Jack Cable
Video out cable
Installation template
9-pin and 2-pin terminal block
Screws and anchors
Hex wrench driver
Quick installation guide
Clamping core
To prevent electromagnetic interference
Silicon waterproof band i
Note
The above contents are subject to change without prior notice. www.rivatech.de
8
3. PART NAMES
⑦
* Models and their appearance are subject to change without any prior notice.
1.
Fan
The fan and heater (underneath the black panel) are implemented for controlling temperature and humidity level.
2.
Reset button
The reset button can be used for restarting the device or resetting it to Factory
Default. Refer to 6.3. Reset and 6.4. Factory Default for more details. Reset button is
located under PCB.
3.
PAL/NTSC button
The initial factory version setting is free from PAL or NTSC. Push the button once to set as PAL format. Push the button twice to set as NTSC. Push the button one more time to return to no video output mode. Please note that the analog video signal is only
3 minutes present and go back automatically to none video output mode (only installation process). PAL/NTSC button is located under PCB www.rivatech.de
9
4.
Video output, audio and IO terminal connector
A 9-pin terminal block is included in the device package. Connect this terminal block into this connector for cable connection of video output, audio input/output and digital
input/output. Refer to 5.Connections for more details.
5.
LAN connector
RJ45 LAN connector for 10/100 Base-T Ethernet.
6.
Micro SD card slot
Memory card slot for external storage.
7.
Power Adaptor Connector (DC 12V)
DC12V 3A adapter for power supply. www.rivatech.de
10
4.INSTALLATION
1) Place the installation template (paper) that is included in the package on the desired installation surface.
2) Drill three holes in correct positions based on the template paper, and insert anchor blocks into the holes.
3) Place the waterproof silicon band on the bottom plate of the device and make it align with screw holes.
4) Place the camera body to the installation surface and match three alignment holes with three anchor blocks. Then tighten the surface anchor studs.
5) Connect all the required cables to the camera.
6) Adjust the lens position. Detailed
information can be found in 4.2. Setting the Lens Position.
7) Place the dome cover on the main body of the camera. Dome cover has three alignment holes that match camera body’s alignment holes.
8) Once properly placed, insert screws into the three holes of the body and tighten them up.
!
Caution
To prevent products from damaging, place the camera on stable and non-vibrating surfaces. If the stability is in doubt, consult with safety personnel for reinforcements, and then proceed with the installation. www.rivatech.de
11
4.1. Installation Template
!
Caution
Installation template image’s size scale in this installation guide is not 1:1.
The correct-size template design paper can be found inside the package separately. www.rivatech.de
12
4.2. Setting the Lens Position
Instruction below describes how to set the lens positions and manually adjust zoom and focus.
1) Remove the dome cover.
2) Set the lens position by rotating the camera gimbal; to pan, rotate the reinforced lower body of the gimbal; to tilt, vertically adjust the camera gimbal.
A. To adjust lens position, rotate the camera gimbal
B. To pan, rotate the lower body of the camera gimbal
C. Tilt the lens by vertically adjusting the camera gimbal
Refrain from continuously rotating the camera gimbal with excessive
!
force to a single direction as it is attached with the IR-LED cable
Caution inside the dome.
3) Zoom and focus levers are located inside the camera gimbal. Rotate the gimbal counterclockwise and pull to detach. While detaching, do not pull straight off as there is an IR sensor and LED power cable connected to a cover. To attach the cover back, rotate the gimbal while gently pushing it in.
4) Unscrewing the zoom lever will allow users to adjust the lens zoom position. After the setting, tighten up the zoom lever again by turning it clockwise.
Focus lever
Zoom lever www.rivatech.de
13
5) Unscrew the focus lever by turning it counterclockwise. Move it left or right and adjust the image focus. After the setting, tighten the focus lever again by turning it clockwise.
4.3. Setting the Image Attribute
Through the camera’s webpage, users can configure image settings.
The camera image’s brightness, contrast, saturation and sharpness are adjustable through the image settings. (Setup > Video & Audio > Camera). www.rivatech.de
Reset
S
W
6
S
W
5
S
W
4
S
W
3
S
W
2
S
W
6
S
W
5
S
W
4
S
W
3
S
W
2
S
W
1
S
W
1
14 Reset
5. CONNECTIONS
SW1 SW2
N / A
SW5
N / A
SW3
N / A
SW6
N / A
VIDEO
DO DI
Out C 1 C 1 Out
AUDIO
In ETHERNET MICRO SD
DC12V
+
SW1
SW2
1.
SW3
N / A N / A
SW5 SW6
VIDEO
Out C
DO DI
1 C
AUDIO
1 Out In ETHERNET
Mic
Amp Speaker
2.
Sensor (DI) connection www.rivatech.de
MICRO SD
DC12V
+
15
The camera provides 1 channel D/I. It can be connected to either a voltage type sensor or a relay type sensor as the following figures. Settings can be done through the camera’s webpage
Input voltage range: 0VDC minimum to 5VDC maximum, Max 50mA
Input voltage threshold: 1.5V
!
Caution
Do not exceed the maximum input voltage or relay rate.
Internal +3.3V
DI
Output of
Sensor
+ -
Internal
DI
Output of
Sensor
+ -
COM
COM - +
Relay Type
3.
Alarm (DO) connection
Only the relay type is supported.
Relay Rating: Max 24VDC 50mA
!
Caution
Do not exceed the maximum relay rating.
Voltage Type www.rivatech.de
16
Internal
DO
Device
COM
Relay Type
!
Caution
Must connect GND port which is located between systems. www.rivatech.de
17
4.
Video input/output
The camera provides 1 video out
GND Video
Black Red
5.
LAN connection
This is a RJ45 LAN connector for 10/100 Base-T Ethernet. Connect a LAN cable.
Green LED Orange LED
When the device is connected, the orange LED stays on while green LED continues to blink.
6.
12V DC Power
A 12 DC device.
power connector is required for this
Black
12V
Red www.rivatech.de
18
6.CONFIGURATION
6.1.Set up network environment
The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of the device from converting the MAC address’s hexadecimal numbers, which is attached to the device. Be sure that the device and PC are on a same area network before running the installation.
IP address : 192.168.xxx.xxx
Subnet mask: 255.255.0.0
6.1.1. Generic IP Environment
In case of generic private network environment where IP address 192.168.XXX.XXX are used, users may view the live streaming images on a web page using the device’s default IP address:
1.
Convert the device’s MAC address to the IP address. Refer to the Hexadecimal-
Decimal Conversion Chart at the end of the manual.
(The MAC address of the device is attached on the side or bottom of the device.)
MAC address = 00-13-23-01-14-B1
→
IP address = 192.168.20.177
Convert the last two set of hexadecimal numbers to decimal numbers.
2.
Start the Microsoft® Internet Explorer web browser and enter the address of the device. www.rivatech.de
19
3.
Web streaming and device configurations are supported through ActiveX program.
When the ActiveX installation window appears, authorize and install the ActiveX.
6.1.2. Custom IP Environment
IPAdminTool and the manual are provided on USB stick or can download from www.rivatech.de
homepage.
IPAdminTool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot, and device organizations.
To modify the device’s default IP address for customized network area;
1.
Find the device from the IPAdminTool’s list and highlight the device’s name.
2.
Right-click the mouse and select “IP Address”; IP Setup window appears. www.rivatech.de
20
Give new unique IP address in last two sets and mirror other information in other boxes
PC environment Info
3.
In the IP Setup’s window, information under ‘Local Network information’ displays the user/PC’s network area information. Those information need to be incorporated to the IP Address, Subnet Mask, Gateway, and DNS boxes, except the last 2 sets of
IP Address, which are to be the unique numbers for the device. Refer to the image above for the setting
4.
Click ‘Setup’ to complete the modification. When the dialog box appears to request user name and password, enter the default value for the administrator account
(case-sensitive) as below:
ID:
root
Password:
pass
6.2. View video on web page
Type the proper IP address to view the live streaming images through a web browser.
The default username and password is
root / pass
. www.rivatech.de
21
1.
The browser asks to install the ActiveX. Click Allow.
2.
Setup.exe installation link or pop-up window appears, depends on Microsoft®
Internet Explorer version. Proceed with rest of setup installation.
3.
Follow the instructions of the dialog boxes and complete the installation. Once the installation is complete, start the web browser again and check if video stream is displayed in the main view frame. www.rivatech.de
22
4.
!
Caution
If “
This software requires the Microsoft XML Parser V6 or higher.
Please download MSXML6 from the Microsoft website to continue.
Error code: Cannot create XMLDOMDocument.
” message appears, download and install the Microsoft Core XML Services (MSXML)
6.0.
6.2.1. View video using IPAdmin Tool
IPAdminTool automatically searches all activated network encoders and IP cameras and shows the product name, IP address, MAC address and etc. IPAdminTool is provided on USB stick or can download from www.rivatech.de
homepage.
1.
From the IPAdminTool’s product list, select the device by highlighting it.
2.
Right-click the mouse and select Web view www.rivatech.de
23
3.
The system’s default web browser opens the device’s address. Please take care that the default system web browser is Microsoft® Internet Explorer to support
ActiveX plug-in.
!
Caution
Whether directly accessing the streaming video through typing IP address on a web page or taking steps through IPAdminTool, the
ActiveX is needed to be installed for the Microsoft® Internet
Explorer to have the complete configuration privileges.
6.3. Reset
1.
Push the Reset button and hold for 1~2 seconds.
2.
Wait for the system to reboot.
6.4. Factory Default
If you reset your device to the factory default setting, all parameters including the IP address will be initialized. For the Factory Default reset:
1.
While the device is on, press reset button and hold.
2.
Release the Reset button after about 5 seconds when green LED blinks at rate of
200ms.
3.
Wait for the system to reboot.
The factory default settings can be inferred as follows:
IP address:
Network mask:
Gateway:
User ID:
Password:
192.168.xx.yy
255.255.0.0
192.168.0.1 root pass www.rivatech.de
24
More Information
To learn more about using other features of your devices, refer to the manuals as
“Web Interface Manual” or “VCAsys_Online_Help”, which is available on USB stick or on www.rivatech.de
homepage. www.rivatech.de
25
APPENDIX (A): SPECIFICATIONS
Summary
Camera Module
CMOS
ELECTRIC
AL
Image Sensor
Effective
Pixels
Scanning system
Resolution
Min.
Illumination
AGC Control
Lens
Day & Night
Video
Compression Format
Number of Streams
1/2.7” 1080p CMOS
1920x1080
Progressive scanning
1920 x 1080
Color: 0.5 lux, F1.2
BW: 0 lux (IR LED ON)
Auto
3.0~9.0mm Vari-Focal F1.2
Removal IR Cut Filter
Resolution
Compression FPS
Motion Detection
Burnt-in Text (Digital)
Output
Audio
Input/output
Compression Format
Function
Digital Input/output
RS-485
Network
Power over Ethernet
Protocol
SD Slot
H.264, MJPEG Selectable per Stream
Dual Stream, Configurable*
1920x1080, 1280x720, 800x450, 480x270,
320x180
Up to 30fps@1080p*
Built-in
Video stream overlay text
Analog video output for installation only
1/1 channel
G.711
1/1 channel
Not supported
10/100 Base-T
Supported (only Camera + Fan)
TCP/IP, UDP/IP, HTTP, RTSP, RTCP, RTP/UDP,
RTP/TCP,
SNTP, mDNS, UPnP, SMTP, IGMP, DHCP,
DDNS, SSL v2/v3, IEEE 802.1X, SNMP v2/v3
Supported (MicroSD)
※ Micro SD Card not included
* When VCA is activated, only one camera stream will be available and frame rate is limited to
15fps@1080p. Limitations are based on V.1.3.0 firmware release and could be changed without notice www.rivatech.de
26
Power Consumption
Video Output
Audio Input
Electrical Characteristics
Power Source
Audio Output
D/I
D/O
DC 12V / PoE IEEE802.3af (Class 0) PoE support camera + fan
1.0A @ DC12V / 12W (Heater Off / LED On)
1.8A @ DC12V / 21.6W (Heater On / LED On)
1 Vp-p, 75 Ω , Composite
Linein, 1.43Vp-p(Min 1.35Vp-p, max 1.49 Vp-p),
39 K
Ω
Lineout, 46mW Power, 16
Ω
Max 50mA@5VDC, TTL level 1.5V threshold
Max 50mA@24VDC
On-state resistance: 50
Ω
(max continuous)
Environment Condition
Operating Temperature
Operating Humidity
Operating Range
DC12V : -40
˚
C ~ 50
˚
C (-40
˚
F ~ 122
˚
F)
PoE : 0 ˚ C ~ 50 ˚ C (32 ˚ F ~ 122 ˚ F)
Cold Start
DC12V : -20
˚
C (-4
˚
F)
PoE: 0 ˚ C (32 ˚ F)
Up to 85% RH
Mechanical Condition
Material
Color
Dimension
Weight (Approx)
Aluminum Die Casting
White
Housing : 155 (Ø) x 129(H) mm
Dome : 100(Ø) mm
1.2kg www.rivatech.de
27
APPENDIX (B): POWER OVER ETHERNET
The Power over Ethernet (PoE) is designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-
Ethernet (PoE) standard. IEEE 802.3af allows for two power options for Category 5 cables. The IEEE 802.3af-2003 standard allows up to 15.4 W power to device.
However, 12.95W is the maximum available power, as some power gets lost in the cable. PoE has advantages over conventional power in such places where AC powers cannot be reached or expensive to wire.
Note: For proper activation of 12V PoE, the Category 5 cable must be shorter than
140m and conform the PoE standard.
PoE compatibility
With non Power Sourcing Equipment (PSE)
When it is connected with non PSE, the power adaptor should be connected.
With power adaptor
Connecting both PSE and power adaptor does not do any harm to the product, but power adaptor will be the only power source for the device as it has priority over PSE.
In this case, disconnecting power adaptor while it is operating will cause the device to reboot. And PoE will be the power source for the device after the reboot.
Power classification
The PoE Power Class supported by the IP device is Class 0.
Class
0
Usage
Default
Minimum Power Levels
Output at the PSE
15.4W
Maximum Power Levels at the Powered Device
0.44 to 12.95W i
Note
Disconnecting PSE or PoE doesn’t reboot the device as long as one of power source is connected. www.rivatech.de
28
APPENDIX (C): DIMENSIONS
www.rivatech.de
(Unit: mm)
29
APPENDIX (D): HEXADECIMAL-
DECIMAL CONVERSION TABLE
Refer to the following table when you convert the MAC address of your device to IP address.
Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec Hex Dec
0F 15
10 16
11 17
12 18
13 19
14 20
15 21
16 22
17 23
18 24
19 25
1A 26
1B 27
1C 28
1D 29
1E 30
3
4
5
6
0
1
2
7
8
7
8
9 9
0A 10
0B 11
0C 12
0D 13
0E 14
3
4
5
6
0
1
2
1F 31
20 32
21 33
22 34
23 35
24 36
34 52
35 53
36 54
37 55
38 56
39 57
3A 58
3B 59
3C 60
3D 61
3E 62
3F 63
40 64
41 65
42 66
43 67
25 37
26 38
27 39
28 40
29 41
2A 42
2B 43
2C 44
2D 45
2E 46
2F 47
30 48
31 49
32 50
33 51
44 68
45 69
46 70
47 71
48 72
49 73
A3 163
A4 164
A5 165
A6 166
A7 167
A8 168
A9 169
AA 170
AB 171
AC 172
AD 173
AE 174
AF 175
B0 176
B1 177
B2 178
94 148
95 149
96 150
97 151
98 152
99 153
9A 154
9B 155
9C 156
9D 157
9E 158
9F 159
A0 160
A1 161
A2 162
B3 179
B4 180
B5 181
B6 182
B7 183
B8 184
7E 126
7F 127
80 128
81 129
82 130
83 131
84 132
85 133
86 134
87 135
88 136
89 137
8A 138
8B 139
8C 140
8D 141
6F 111
70 112
71 113
72 114
73 115
74 116
75 117
76 118
77 119
78 120
79 121
7A 122
7B 123
7C 124
7D 125
8E 142
8F 143
90 144
91 145
92 146
93 147
59 89
5A 90
5B 91
5C 92
5D 93
5E 94
5F 95
60 96
61 97
62 98
63 99
64 100
65 101
66 102
67 103
68 104
4A 74
4B 75
4C 76
4D 77
4E 78
4F 79
50 80
51 81
52 82
53 83
54 84
55 85
56 86
57 87
58 88
69 105
6A 106
6B 107
6C 108
6D 109
6E 110
DE 222
DF 223
E0 224
E1 225
E2 226
E3 227
E4 228
E5 229
E6 230
E7 231
E8 232
E9 233
EA 234
EB 235
EC 236
ED 237
EE 238
EF 239
F0 240
F1 241
F2 242
F3 243
F4 244
F5 245
F6 246
F7 247
F8 248
F9 249
FA 250
FB 251
FC 252
FD 253
FE 254
FF 255
C8 200
C9 201
CA 202
CB 203
CC 204
CD 205
CE 206
CF 207
D0 208
D1 209
D2 210
D3 211
D4 212
D5 213
D6 214
D7 215
B9 185
BA 186
BB 187
BC 188
BD 189
BE 190
BF 191
C0 192
C1 193
C2 194
C3 195
C4 196
C5 197
C6 198
C7 199
D8 216
D9 217
DA 218
DB 219
DC 220
DD 221 www.rivatech.de
30
REVISION HISTORY
MAN# DATE(M/D/Y) Comments
01A.01 05/24/2012 First release version
01A.02 06/01/2012 Power consumption, illumination variable update
01A.03 06/12/2012 Video, PAL/NTSC description corrected
01A.04 06/25/2012 DI/DO specification corrected
01A.05 07/03/2012 Supporting protocol revised. (removed SOCK and SSH)
01A.06 07/04/2012 Reset/Factory reset description updated www.rivatech.de
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement