Tendak AV-005-WH Video Converter User Manual

 MINI
HDMI to CVBS
USER Manual
Introduction
The MINI HDMI to AV signal converter which will convert HDMI
video signal or audio signal to AV (CVBS) composite video
signal and the FL / FR stereo audio signals, while support DVI
system sideline signals. To help users convert the high quality
of the HDMI video signal into normal CVBS signal (standard-
definition 480i, 576i,).So that can play on TV, VHS VCR, DVD
recorders, etc and support NTSC and PAL two TV format.
Features
1. No need to install drivers, portable, flexible, plug and play.
2. Low power, No power adaptor.
3. Support NTSC and PAL two standard TV formats
output
4. Compatible HDMI1.3
SPECIFICATIONS
1. Input ports: 1XHDMI.
2. Output ports: 1XRCA (Yellow, White, Red)
3. Dimensions (mm): 66(D) x55(W) x20(H)
4. Wight (g): 40
5. HDMI Input Resolution:
= 640x480@60Hz,800x600@60Hz,
= 1024x768@60Hz,1280x720@60Hz,
= 1280x1024@60Hz,1360x768@60Hz,
= 1600x1200@60Hz,1920x1080@60Hz,
= 480i/60Hz, 480p/60Hz, 576i/60Hz, 576p/60Hz,
= 720p50/60Hz,1080150/60Hz, 1080p50/60Hz.
m 6. CVBS output: PAL, NTSC_M, and (NTSC _J)
PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging
and make sure the following items are contained in the shipping
carton:
1) Main unit (HDMI to AV Converter) -------------—- 1PCS
2) USB Cable 1PCS
3) User Manual. 1PCS
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar
with the signal input(s), output(s) and power requirements.
Back Panel: Top Panel: Front Panel
CONNECTION DIAGRAM
=> €)
TV Displayer
MER
vet-top boxes HD players HDMI to CVBS+Audio
Blu-ray DVD players
FAQ
= Doesn't work, No signal output
1.Please check if sink device displays colour bar when it only
connect AV cable with unplug HDMI cable; if not, the converter
is damaged.
2.Please check the HDMI signal source output well
3.Please check the USB port whether it has supply power or
not, or try it again with another USB cable
4 Please set the TV to AV mode
= No color with black & white
1.Please check the AV cable, make sure it works
2.Please switch NTSC/PAL formats with corresponding
NTSC or PAL TV
m Low resolution image with fuzzy text
1. Text loss frames for converter high-resolution HDMI to low-
resolution AV
2. AV output maximally 576i
= |f audio output without image
1. Please check the AV cable, make sure it works
2. Set the computer to Duplicate mode (Under Windows 7,
Right click with your mose - Appearance and Personalization -
Display —Adjust screen resolution, Click the drop-down list
next to Duplicate these displays)
3. While setting Extend mode, directly drag windows on
computer to the second screen
= Image blinking
1. Please check the AV cable, make sure it works
2. Check if USB cable supply enough power