advertisement
HDMI 1x4 TV WALL
User manual
VER:1.0
User Manual
1. Introduction
The 1 by 4 HDMI TV Wall support CVBS/VGA/HDMI/USB play input sources to be freely arranged on 4 displays. The embedded scaler converts signals from the input sources to match the native resolution of monitors, lat panel displays, projectors as well as user-selectable output settings up to 1920x1080. All the operation and control can be done through IR, Ethernet and RS-232. The HDMI TV Wall is widely used in
KTV, hotels, bars, leisure centers, shopping malls, television stores
,cinemas, products display, media advertising, building, education and training, Brand stores, airports, subway, etc.
2. Package Contents
HDMI 1 x4 TV Wall --------------------------------------------------1pcs
12V/2.5A DC power adaptor---------------------------------------1pcs
Operation Manual---------------------------------------------------1pcs
38KHz IR Receiver cable--------------------------------------------1pcs
TV Wall Remote------------------------------------------------------1pcs
RS232 cable----------------------------------------------------------1pcs
3. Feature
Compliant with HDMI1.3a, DVI1.0;
Output source signal to 4 displays (2 by 2 Video wall) as a full image with adjustable Bezel Correction;
Supports IR, Ethernet and RS232 controls;
Supports cascade to 9 dispay(3 by 3 video wall) mode;
Supports CVBS/VGA/HDMI input and USB movie, picture and music playback;
Advanced video De-interlacer for improving 480i and 576i SD video input;
Support input formats:
CVBS: PAL, NTSC, SECAM with stereo audio input;
VGA:640x480@60Hz, 800x600@60Hz, 1024x768@60Hz,
Page 1 of 8
User Manual
1280x1024@60Hz, 1280x720@60Hz, 1360x768@60Hz,
1440x900@60Hz, 1680x1050@60Hz, 1920x1080@60Hz with stereo audio input;
HDMI: 1080p@50/60Hz, 1080i@50/60Hz, 720p@50/60Hz,
576i/p,480i/p, 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz,
1280x1024@60Hz, 1280x720@60Hz, 1360x768@60Hz,
1440x900@60Hz, 1680x1050@60Hz, 1920x1080@60Hz;
USB: MPEG, H.264, RM/RMVB movie decode, JPEG, BMP, PNG Picture decode and MPEG1/2, MP3 audio decode;
Support output resolution up to 1080p60Hz;
Perfectly as a video screen splitter, a video converter and a video switcher;
4. Speci ication
Video Bandwidth: 225MHz/6.75Gbps
Input ports: 1x HDMI (Female type), 1xUSB,
1xVGA,1xCVBS+L/R
Output ports: 5 x HDMI (Female type) ,1xCoaxial, 2xL/R
HDMI Cable Distance: 15M/8-bit 1080p
ESD Protection: Human body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
Power Supply: 12V/2.5A DC (US/EU standards, CE/FCC/
ULcerti ication)
Dimensions (mm): 250mm (W) X 118mm(D) X 32mm(H)
Weight (g): 1050 g
Chassis Material: Metal
Silkscreen Color: Black
Operating Temperature: 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature: -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity: 20~90% RH (non-condensing)
Power Consumption: 7.5W
Page 2 of 8
5. Panel Functions
5.1 Front panel
User Manual
① ② ③
① Power Button: Press this button to power the device on/off.
② Power Led: The LED will illuminate green when the power is on, red when
③ it is in 'Standby' mode.
IR: IR Receiver window (accepts the remote control signal of this device only).
5.2 Rear panel
① ② ③
② ③ 4
① Control part
TCP/IP: This port is the link for TCP/IP controls, connect to an active Ethernet link with an RJ45 terminated cable.
RS232: Connect to a PC or control system with D-Sub 9-pin cable for the transmission of RS-232 commands.
IR EXT: if the panel sensor is obstructed or the unit is installed in a closed area out of infrared line of sight, the IR RX receiver included can be inserted into the
IR EXT port at the rear to extend the IR sensor range and enable local control of the TV Wall.
Page 3 of 8
User Manual
② Output
HDMI OUT: Connect with HDMI TV/displays for output image display. It is suggest that the connection sequence should be placed as diagram showed for TV wall set up. LOOP OUT is the nominated port for cascading the input signal.
AUDIO OUT : The coax and audio out where you connect to the digital or analog audio ampli ier .
③ Input
Connect with source equipment such as DVD/Blue-ray players, PC, Game console or USB disc devices to CVBS,VGA,HDMI,USB input port.
④ DC 12V : Plug the 12V/2.5A DC power supply into the DC12V power in.
6. Remote Control
①
③
④
⑥
⑧
②
HDMI VGA
Auto
CV USB
Zoom Mute
⑤
Menu
1
1
Exit
TV Wall Mode
2 3
H
2 3
V
X Y
4
4
1080p 720p 1360x768 1024x768
TV WALL Remote
⑦
① Press this button to power on the
TV Wall or set it to standby mode.
② Press this button for rotate 90 °
screen, only for 1x2, 1x3, 1x4 TV
Wall mode.
③ Input Sources select button.
④ AUTO button for VGA input auto
adjustment function;
ZOOM button for all input sources
zoom in and zoom out function. The
else button for USB input source
control function.
⑤ These buttons for Audio output
volume adjustment function,
(include HDMI, Coaxial and analog
audio output).
Page 4 of 8
User Manual
⑥
⑦
⑧
TV Wall mode selection: such as 2x2 TV Wall mode, press “ H ” towards
“2”,then press “ V ” towards “2”.
TV Wall Picture Bezel correction adjust: the users can set the bezel size of the images in zoom-in model, to make the whole image looks coherently.
TV Wall output resolution selection.
6. Connection and Installation
• 2x2 TV Wall
PC
2 .
0 Sound
Amplifier
PC DVD or Blu-ray Player
Router
TV
2X2 TV WALL
Page 5 of 8
DVD or Blu-ray Player
Power
Supply
• 3x3 TV Wall
User Manual
Router
PC
2 Sound
Amplifier
PC DVD or Blu-ray Player
B5 B4 B3 B2 B1
Power
Supply
A5 A4 A3 A2 A1
DVD or Blu-ray Player
Power
Supply
3x3 TV WALL
7. TV Wall connection sequence diagram
1x2(H)
1x3(H)
1x4(H)
A1
A1
A1
A2
A2
A2
A3
A3 A4
1x2(V)
A1 A2
1x3(V) A1 A2 A3
1x4(V) A1 A2 A3 A4
Page 6 of 8
2 x 1
3 x 1
4 x 1
2 x 2
A1
A2
A3
A4
A1
A3
A1
A2
A1
A2
A3
A2
A4
Cascade 2
2 x 3
3 x 2
2x4
A1
B1
A2
B2
A1
A2
A3
B1
B2
B3
A1
B1
A2
B2
A3
B3
A3
B3
A4
B4
Page 7 of 8
User Manual
4 x 2
3 x 3
A1
A4
B3
A1
A2
A3
A4
A2
B1
B4
B1
B2
B3
B4
A3
B2
B5
User Manual
Page 8 of 8
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement