Purity UU000070 Screen Protector User Guide

Premium Glass Screen Protector

1.

Use the wet wipe to remove any dirt on the screen.

2. Use the dry wipe to ensure all dust and liquid have been removed.

3.

Place the guidance frame on top of the phone and ensure it fits snugly.

Align the imprinted text on the frame with your phone.

4.

Dab the sticker side of the dust-absorber to eliminate any amounts of debris on the screen.

5.

Remove the bottom protective layer by pulling away the top rectangular tab.

6.

Without touching the sticky side of the protector, gently tap the top of the protector to the top side of the frame making sure the protector falls exactly between the frame.

7.

Slowly drop the screen protector onto the screen. Always make sure the top edge of the screen protector is adjacent to the top side of the guidance frame.

Premium Glass Screen Protector

8.

Tap the center of the screen protector. The protector will start to adhere to the screen. If there are any bubbles, use your finger to press down and drive the bubbles out towards the closest edge.

9.

Remove the guidance frame and your phone is now protected!

FAQ

Which cases will this screen protector work with?

This screen protector is compatible with the majority of phone cases.

How do I remove any remaining air bubbles after installation?

Before installation, it is very important to properly clean and dust your screen. For the remaining air bubbles, we recommend using the comb provided, or a credit card. Some air bubbles may take up to 24 hours to fully disappear.

Will this screen protector cause any interference with my smartphone’s sensor or facial recognition?

No.There will be no interference.This screen protector is compatible with all iPhone features.