Education Software
Installer 2012 SP1
Windows® operating systems
Installation guide
Trademark notice
SMART Notebook, SMART Ink, SMART Response, SMART Sync, SMART Classroom Suite, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. Microsoft, Windows, Windows Vista, Internet Explorer, ActiveX, DirectX and
Visual Studio are either registered trademarks or trademarks of Microsoft Corporation in the U.S. and/or other countries. Adobe and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the U.S. and/or other countries. All other third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2012 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof covered by one or more of the following U.S. patents.
www.smarttech.com/patents
09/2012
i
Contents
Chapter 1: Getting started
Computer requirements
Deploying the software
Chapter 2: Installing the software
Starting the installation wizard
Using the installation wizard to install the software
Using the software after installation
3
3
4
5
1
1
2
Chapter 1:
1
Chapter 1
Getting started
This guide explains how to install the following software using the Education Software Installer: l
SMART Notebook™ collaborative learning software 11 l
SMART Notebook Math Tools software l
3D Tools for SMART Notebook software l
SMART Product Drivers 11 l
SMART Ink™ l
SMART Response™ 2012 assessment software l
SMART Sync™ 2011 Teacher software l
SMART Classroom Suite™ Teacher software l
SMART Common Files
This guide is intended for teachers, IT administrators and others responsible for installing software on teachers’ computers.
To use this guide, you must have access to the installation DVD or the Internet.
Computer requirements
N O T E
Operating systems and other third-party software released after this SMART software might not be supported.
Before you install the software, ensure your teachers’ computers meet the minimum requirements: l
Pentium® 4 processor or better l
1 GB of RAM (2 GB recommended)
2
C H A P T E R 1
Getting started l
Free hard disk space:
Software
SMART Notebook software
Gallery Essentials
Lesson Activity Toolkit
SMART Product Drivers
SMART Ink
SMART Response software
SMART Sync Teacher software
SMART Common Files
Recommended total free hard disk space
Space required
277 MB
549 MB
111 MB
110 MB
46 MB
89 MB
37 MB
111 MB
2.5 GB
l
Windows® XP SP3, Windows Vista® SP2 or Windows 7 operating system l
Microsoft® .NET framework 4.0 client for SMART Notebook software and SMART Ink l
Microsoft Visual Studio® Tools for Office for SMART Ink l
Adobe® Flash® Player 11.4 ActiveX® control for SMART Notebook software l
Adobe Flash Player 11.4 Firefox® plug-in for SMART Notebook software and
SMART Response software l
DirectX® technology 8.1 or later for SMART Video Player l
DirectX 9 compatible graphics hardware for 3D Tools for SMART Notebook software l
Internet Explorer® Internet browser 6.0 or later l
Internet access to download SMART Response software, SMART Sync Teacher software,
Gallery content and language packs.
N O T E
If you don’t have the Microsoft .NET framework 4.0 client, Microsoft Visual Studio Tools for Office, the Adobe Flash Player 11.4 ActiveX control or the Adobe Flash Player 11.4 Firefox plug-in, the installation wizard installs these components.
Deploying the software
If you’re an IT administrator and you want to deploy the software to multiple computers, see the
Education Software Installer 2012 SP1 system administrator’s guide
( smarttech.com/kb/170148 ).
Chapter 2:
Chapter 2
Installing the software
Starting the installation wizard
You can start the installation wizard by inserting the DVD into the computer or by downloading the wizard from the SMART website.
g
To start the installation wizard from the DVD
1. Insert the DVD into the computer.
The
Education Software 2012 SP1 Installer
dialog box appears.
N O T E
If the dialog box doesn’t appear, browse to and open
[DVD drive]
\CDBrowser.exe
using
Windows Explorer.
2. Click
Install
.
The installation wizard appears.
g
To download and start the installation wizard from the website
1. Go to smarttech.com/software , click the
Choose a version
button for the software you want to install, and then select the version of the software you want to install.
2. Click
Download
.
3. Enter the requested information, and then click
Start Download
.
4. Save the file to a temporary location.
5. Double-click the file.
The installation wizard appears.
3
C H A P T E R 2
Installing the software
Using the installation wizard to install the software
g
To use the installation wizard to install the software
1. Start the installation wizard as described in the previous procedures.
2. Click
Next
.
3. Read the software license agreement.
4. If you accept the terms in the software license agreement, select
I accept the terms in the license agreement
, and then click
Next
.
OR
If you don’t accept the terms in the software license agreement, select
I do not accept the terms in the license agreement
, and then click
Cancel
.
T I P
Select a language in the drop-down list to display the software license agreement in that language.
5. Specify the location where you want to install the software, and then click
Next
.
6. Select the software you want to install, and then click
Next
.
N O T E S
o
If you select
SMART Notebook
, the installation wizard selects
SMART Product Drivers
automatically.
o
If you select
SMART Product Drivers
, the installation wizard automatically installs
SMART Ink.
o
If you select
SMART Response
,
SMART Notebook Math Tools
or
SMART Notebook 3D Tools
, the installation wizard selects
SMART Notebook
and
SMART Product Drivers
automatically.
o
If you select
SMART Classroom Suite Teacher
, the installation wizard selects
SMART Notebook
,
SMART Product Drivers
,
SMART Response
and
SMART Sync Teacher
automatically.
7. If you selected
SMART Product Drivers
or
SMART Response
in step 6, select the software you want to start automatically when you first log on to your computer, and then click
Next
.
4
5
C H A P T E R 2
Installing the software
8. If you selected
SMART Product Drivers
in step 6, select the
Make SMART Ink Document
Viewer the default PDF viewer
to make SMART Ink Document Viewer the default PDF viewer, and then click
Next
.
9. If you want to participate in the Customer Experience Program, select
Enable the Customer
Experience Program on all devices
, and then click
Next
.
10. If you selected
SMART Notebook
in step 6, select the Gallery collections you want to install on to your computer, and then click
Next
.
11. Move the languages you want to install from the
Available languages
list to the
Selected languages
list, and then click
Next
.
N O T E
If a language’s name is in bold text, the installation wizard must download the language’s file from the SMART website.
T I P
To view the language’s native names (for example, “Deutsch” for German), select
Show native names
.
12. Click
Install
.
The installation wizard installs the software you selected in step 6.
13. Click
Finish
when you’re done.
N O T E
Depending on the version of Microsoft .NET framework installed on your computer and the software you selected in step 6, you might need to restart your computer midway through the installation.
Using the software after installation
After installing the software, you can use it.
For more information on the software’s features, visit smarttech.com/support .
SMART Technologies smarttech.com/support smarttech.com/contactsupport
