Education Software
Installer 2012 SP1
Mac OS X operating system software
Installation guide
Trademark notice
SMART Notebook, SMART Ink, SMART Response, SMART Vantage, SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party product and company names may be trademarks of their respective owners.
Copyright notice
© 2012 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not represent a commitment on the part of SMART.
This product and/or use thereof covered by one or more of the following U.S. patents.
www.smarttech.com/patents
09/2012
i
Contents
Chapter 1: Getting started
Computer requirements
Deploying the software
Chapter 2: Installing the software
Starting the installation wizard
Using the installation wizard to install the software
Using the software after installation
3
3
4
5
1
1
2
Chapter 1:
Chapter 1
Getting started
This guide explains how to install the following software using the Education Software Installer: l
SMART Notebook™ collaborative learning software 11 l
3D Tools for SMART Notebook software l
SMART Product Drivers 11 l
SMART Ink™ l
SMART Response™ 2012 assessment software l
SMART Common Files
This guide is intended for teachers, IT administrators and others responsible for installing software on teachers’ computers.
To use this guide, you must have access to the installation DVD or the Internet.
1
Computer requirements
Before you install the software, ensure your teachers’ computers meet the minimum requirements: l
1.5 GHz Intel® processor or better l
1 GB of RAM l
Free hard disk space:
Software
SMART Notebook software
Gallery Essentials
Lesson Activity Toolkit
3D Tools for SMART Notebook software
SMART Product Drivers
SMART Ink
SMART Response software
SMART Common Files
Recommended total free hard disk space
Space required
163 MB
499 MB
70 MB
68 KB
203 MB
7 MB
65 MB
257 MB
2000 MB
2
C H A P T E R 1
Getting started l
Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), or 10.8 (Mountain Lion) operating system software l
Adobe® Flash® Player 11.4 for SMART Notebook software l
Safari application program 4.0.2 or later l
Internet access to download Gallery content
Deploying the software
If you’re an IT administrator and you want to deploy the software to multiple computers, see the
Education Software Installer 2012 SP1 system administrator’s guide ( smarttech.com/kb/170149 ).
Chapter 2:
Chapter 2
Installing the software
Starting the installation wizard
You can start the installation wizard by inserting the DVD into the computer or by downloading the wizard from the SMART website.
g
To start the installation wizard from the DVD
1. Insert the DVD into the computer.
The Education Software 2012 SP1 Installer dialog box appears.
N O T E
If the dialog box doesn’t appear, browse to and open [DVD]/CDBrowser.app using the
Finder.
2. Click Install.
The installation wizard appears.
g
To download and start the installation wizard from the website
1. Go to smarttech.com/software , click the Choose a version button for the software you want to install, and then select the version of the software you want to install.
2. Click Download.
3. Enter the requested information, and then click Start Download.
4. Save the file to a temporary location.
5. Double-click the file.
The installation wizard appears.
3
C H A P T E R 2
Installing the software
Using the installation wizard to install the software
g
To use the installation wizard to install the software
1. Start the installation wizard as described in the previous procedures.
2. Click Continue.
3. Read the software license agreement, and then click Continue.
4. If you accept the terms in the software license agreement, click Agree.
OR
If you don’t accept the terms in the software license agreement, click Disagree.
5. Select the check box if you want to join the Customer Experience Program, and then click
Continue.
6. Select the disk on which you want to install the software, and then click Continue.
7. Select the software you want to install.
N O T E
SMART Notebook and SMART Product Drivers are selected by default.
8. If you selected SMART Notebook in step 7, click its disclosure triangle, and then select the
Gallery collections you want to install on to your computer.
9. If you selected SMART Response in step 7, click its disclosure triangle, and then select Start
Desktop Menu at log in to start SMART Response software when you first log on to your computer.
10. If you selected SMART Product Drivers in step 7, click its disclosure triangle, and then select the appropriate check boxes: o
SMART Ink to install SMART Ink
N O T E
If you selected SMART Product Drivers in step 7, the installation wizard automatically selects SMART Ink.
o
Start Board Tools at log in to start SMART Board® Tools when you first log on to your computer o
Start SMART Vantage Services to start SMART Vantage™ and SNMP Agent services
4
5
C H A P T E R 2
Installing the software
11. Click Continue.
12. Click Install.
A dialog box appears, prompting you for your name and password.
13. Type your name and password, and then click OK.
The installation wizard installs the software you selected in step 7.
Using the software after installation
After installing the software, you can use it.
For more information on the software’s features, visit smarttech.com/support .
SMART Technologies smarttech.com/support smarttech.com/contactsupport
