DC-DC
Step Down
Converter
8A
Model
IDC-100B-12
8 Amps
Design Features
-
Fully isolated
-
Short circuit protected
-
Current limited
2 YEAR LIMITED WARRANTY
INPUT
FUSE
SPECIFICATIONS
WIRE SIZE
SAFETY & EMC
GENERAL
MODEL NO.
INPUT VOLTAGE RANGE
OUTPUT VOLTAGE
OUTPUT CURRENT
INPUT TO OUTPUT ISOLATION
OUTPUT RIPPLE & NOISE
PEAK EFFICIENCY
COOLING
OPERATING TEMPERATURE
HUMIDITY (Non-condensing)
PROTECTIONS
EXTERNAL INPUT SIDE FUSE
(Inline with “input +” terminal)
EXTERNAL OUTPUT SIDE FUSE
(Inline with “output +” terminal)
INPUT WIRE (Up to 6 ft)
OUTPUT WIRE (Up to 10 ft)
EMISSION
IMMUNITY
AUTOMOTIVE
INPUT / OUTPUT CONNECTIONS
DIMENSIONS, MM (L x
W x
H)
DIMENSIONS, INCHES (L x
W x
H)
WEIGHT, KG
WEIGHT, LB
IDC-100B-12
20 - 35 VDC
12.5 VDC
8A
Yes. > 400 V RMS
< 50 mV RMS
85%
By convection
-20oC to +30oC, De-rate linearly to zero at 70oC
Max 95%
Overload / short circuit on the output side, over voltage on the output side, over voltage / transients on the input side, reverse polarity on the input side, over heating
32V, 7.5A
32V, 10A
AWG #14
AWG #10
EN50081-1 / EN61000-6-3
EN50082-1 / EN61000-6-1
95 / 54 / EC
Quick connect male 6.3mm / ¼” flat blade
151 x 88 x 50
5.9 x 3.5 x 1.9
0.5
1.2
NOTE: Specifications are subject to change without notice 12004-IDC-100B-12-0319
To view a full selection of Samlex products visit our website at www.samlexamerica.com
or contact us: 1-800-561-5885 or [email protected]
