advertisement
COMBINATION
HOT DOG STEAMER
& BUN WARMER
MODEL
35SSA, 35SSAD
70SSA
Installation and
Operation
Instructions
2M-Z5374 Rev. L 10/27/11
35SSA
SAFETY SYMBOL
These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance.
Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.
Model No.
Serial No.
Voltage
Authorized Service Agent Listing
Reference the listing provided with the unit or for an updated listing go to:
Website:
E-mail www.star-mfg.com
Purchase Date
Service Help Desk
Business
8:00 am to 4:30 p.m. Central Standard Time
Hours:
Telephone:
Fax:
(314) 678-6303
(314) 781-2714
Website:
www.star-mfg.com
Mailing Address:
Star International Holdings Inc., Company
10 Sunnen Drive
St. Louis, MO 63143
U.S.A
2
Model
35SSA
70SSA
35SSA
70SSA
Capacity
170
230
Electrical Specifications
Voltage Watts
120V
230V
800
120V
230V
1,000
Width
Dimensions
Depth Height
14 3/4” (37.5cm) 16 1/2” (41.9cm) 15 5/8” (39.7cm)
18 3/4” (47.6cm) 16 1/2” (41.9cm) 17 5/8” (44.8cm)
Amps
6.6
3.5
8.3
4.3
Cord
NEMA 5-15P
CEE 7/7
NEMA 5-15P
CEE 7/7
Water Capacity w/o juice tray w/juice tray
11QT 9QT
14QT 12QT
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.
VOLTAGE
The steamer is equipped for use on the voltage specified on the nameplate.
WARNING
DO NOT CONNECT TO ANY OTHER TYPE OF CURRENT OR THE MACHINE
WILL BE SERIOUSLY DAMAGED.
INSTALLATION/OPERATION PROCEDURE
. Place the unit on a level surface. Pour approximately 9 (Model 5) to approximately (Model
70) quarts of water into the water pan. You can add an additional quarts when not using the juice pan. Do not overfill. Using distilled water will prolong the life of the heating element.
. Turn the switch to “ON” position and set the thermostat control on “HIGH” until steam is generated.
Normal heat up time is 30 minutes. Using hot water will reduce heat up time.
. After pre-heat, place hot dogs on the top or bottom hot dog shelf. Arrange the hot dogs so that there is free circulation of steam. A full load of refrigerated hot dogs will take approximately 45 minutes to reach serving temperature.
4. After the hot dogs are brought up to serving temperature, turn the knob to a or 4 setting and add the buns to the wire rack in the bun compartment. One can control the steam in the bun compartment by opening the water fill compartment at the front of the bun compartment.
5. To hold the product, set the thermostat control at setting or 4.
6. Keep the door closed when not serving.
7. Add water as it becomes necessary to maintain the water level. (Add hot water for best results.)
All models are equipped with a low water level indicator. When the light comes on, add water.
CAUTION
DO NOT ALLOW THE UNIT TO OPERATE DRY; THIS MAY DAMAGE THE HEATING
ELEMENT. ADD WATER WHEN REQUIRED.
AT THE END OF EACH DAY’S OPERATION
. Disconnect the power cord from the outlet.
. Remove any remaining hot dogs and buns.
. Allow to cool and drain the water through the drain pipe.
4. Remove the inside components of the steamer. It is easiest if the suggested order is followed: a. Remove the divider.
b. Remove the wire bun rack.
c. Remove the top hot dog shelf.
d. Remove the bottom hot dog shelf.
e. Remove the bun shelf.
f. Remove the juice tray.
5. Reverse the order to reassemble the unit.
POSSIBLE SOURCES OF TROUBLE AND SUGGESTED REMEDIES
Casing of hot dogs burst.
) Too much steam is being generated. Move the thermostat control to a lower setting.
) When using frozen hot dogs, allow them to thaw before putting inside the unit.
Buns too soggy or too dry.
Too much steam or too little steam will produce this condition. Control the amount of steam by adjusting the thermostat control as required or adjust the humidity control lever located in the bun compartment on the bun tray. Do not put buns in the unit while hot dogs are cooking on high. They will be too soggy.
Some buns are better adapted for steaming than others; with some experimentation you will find the one best suited to your needs.
4
Visit our Website at: www.star-mfg.com Email: [email protected]
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.
LIMITED EQUIPMENT WARRANTY
All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid.
> Star will not assume any responsibility for loss of revenue.
> On all shipments outside the United States and Canada, see International Warranty.
* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
*
The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit.
* The warranty period for Teflon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to
Teflon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners, abrasive pads, product identifiers and point-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the
“non-stick” properties of such materials.
> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts and ninety (90) days on labor.
> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or the Service Center's sub-agency.
> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.
> This warranty is not valid on Conveyor Ovens unless
a "start-up/check-out" has been performed by a Factory Authorized Technician.
PARTS WARRANTY
Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is chargeable to the customer.
1. Travel
SERVICES NOT COVERED BY WARRANTY
2.
Mileage and travel time on portable equipment (see below)
10.
Voltage conversions
3.
Labor to replace such items that can be replaced easily during a daily cleaning
11.
Gas conversions routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.
12.
Pilot light adjustment
13.
Miscellaneous adjustments
4.
Installation of equipment
5. Damages due to improper installation
6.
7.
8.
9.
Damages from abuse or misuse
Operated contrary to the Operating and Installation Instructions
Cleaning of equipment
Seasoning of griddle plates
14.
Thermostat calibration and by-pass adjustment
15. Resetting of circuit breakers or safety controls or reset buttons
16. Replacement of bulbs
17. Replacement of fuses
18. Repair of damage created during transit, delivery, & installation OR created by acts of God
PORTABLE EQUIPMENT
Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:
*
*
*
*
The Model 510FD Fryer.
The Model 526TOA Toaster Oven.
The Model J4R, 4 oz. Popcorn Machine.
The Model 518CMA & 526CMA Cheese Melter.
*
The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
*
The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPD & SPD Series Dispenser.
*
All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
*
All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
*
All Fast Steamer Models except Direct Connect Series.
ALL:
* Pop-Up Toasters
* Butter Dispensers
* Pretzel Merchandisers
(Model 16PD-A Only)
* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens
(Model PO12 Only)
* Heat Lamps
* Pumps-Manual
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.
FOR ASSISTANCE
Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.
In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.
2M-4497-2 10/2010
5
13
42
10 14
12 1
3
7 15
6 31
3
32
11
4
9
2
NUT SUPPLIED
WITH ITEM 22.
33
34
35
22
SHOWN IN THE
HEAT ON POSITION
O-RING SUPPLIED
WITH ITEM 22.
5
34
35
37
40
16
NUT AND WASHER
SUPPLIED WITH ITEM 35.
29
20
19
43
40
21
40
26
23
25
41
27
28
THIS DRAWING CONTAINS INFORMATION
CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE
OF ITS CONTENTS IS PERMITTED.
MODEL 35SSA, 70SSA
39
36
18
17
38
24
8
30
STAR MANUFACTURING INTERNATIONAL, INC.
SK1890 REV. B 3/01/06
6
PARTS LIST
October 7, 0, Rev. L
MODEL
5SSA/70SSA Hot Dog Steamer/Bun Warmer
Fig No Part No Qty
1
A3-ST3014
1 Top Assembly
2
3
4
5
A3-ST7009
A3-Z5205
A3-Z5324
A3-Z5198
A3-ST3017
A3-ST7010
A3-ST3013
A3-ST7011
1
2
1
1
Shelf - Bun
Cover - Bun Shelf
Shelf Assy. - Buns
Description
Water Tank Assembly
6
7
8
9
A3-Z5204
A3-Z5327
A3-ST3016
A3-ST7012
A3-Z3967
A3-Z4131
A3-Z5312
A3-Z5331
1
1
1
1
Shelf - Hot Dog
Shelf Assy. - Hot Dogs
Bottom
Juice Tray
10
A3-Z5314
1
2
1
Shelf, Top - Hot Dog
11
12
13
14
15
16
A3-Z5332
A3-Z5199
A3-Z5322
A3-Z5360
A3-Z5361
A3-ST3015
A3-ST7013
2A-Z5202
2A-Z5329
A3-Z5313
A3-Z5326
2R-Z6850
PS-ST3020
1
1
1
1
1
1
Divider
Chain - Door
Door Assembly
Rod - Hinge
Bun Basket
Knob
Application
35SSA
70SSA
35SSA
70SSA
Thermostat Replacement Kit, w/knob (manuf. prior to 10-12-2003)
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
35SSAD
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
17
18
A3-ST3012
A3-ST7002
2E-Z14428
2E-Z4358
19 2E-Z1858
20 2E-Z4148
21 2J-Z2329
22 PS-ST7016
23 2K-7889
1
1
Assembly - Lower Body
Relay DPDT 15A/120V
Relay DPDT 230V
1 Switch - Lighted
1 Switch Splash Guard
1 Pilot Light
1 Float Switch Assembly
1 Bushing Heyco SR-11-2
35SSA
70SSA
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
INCLUDE MODEL AND SERIAL NUMBER
PAGE
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
PARTS LIST
October 7, 0, Rev. L
MODEL
5SSA/70SSA Hot Dog Steamer/Bun Warmer
Fig No Part No Qty
24
25 ————
26 A3-35219
27 2A-Y3405
28 2P-Y3404
29
2M-Z5539
30
A3-ST3006
A3-ST3019
2M-Z5540
2M-Z4035
2M-Z4081
2N-Z4058
31
2N-Z5420
32 2I-Y6404
33
2N-Z4359
2N-Z5252
2T-Z7202
PS-ST3020
1
Description
Cordset Assembly - 120V
Cordset Assembly - 230V
1 Nameplate
1 Cap & Chain
4 Foot
4 Plug - Rubber
1 Label - Control Panel
1 Label - Control Panel
1
1
Label - Body
Element, 1000W / 120V
Element, 1000W / 230V
Element, 800W / 120V
Element, 800W / 230V
Application
70SSA
35SSA
35SSA
70SSA
70SSA
70SSA
35SSA
35SSA
2 O-Ring
1
Thermostat (manufactured after 10-12-2003)
Thermostat Replacement Kit, w/knob (manufactured prior to 10-12-2003)
34 2C-1825
35 2C-2556
36 2C-1488
37 2C-2553
38 2C-6349
39 2C-Y1451
40 2C-1640
41 2C-Y5059
42 2C-2581
43 A3-Z7598
11 Washer #8 Ext. Stl. NP
11 Nut 8-32 Hex. Stl. NP
2 Screw 6-32 x 3/8 RHP Stl. NP
2 Nut 6-32 Hex. Stl. NP
6 Screw #8 x 3/8 B Thrd. Stl. NP
2 Rivet 1/8 x .313 Pop Al. Sm.
3 Screw 8 x 1/4 Type A RH NP
4 Rivet 3/16 x .675 Pop. Al. Am.
2 Nut 1/2-20 Br. Acord NP
1 Thermostat Reinforcement Plate
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
INCLUDE MODEL AND SERIAL NUMBER
PAGE
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
Star Manufacturing International, Inc.
NC
NO
COM
9
0
STAR INTERNATIONAL HOLDINGS INC. COMPANY
Star - Holman - Lang - Wells - Bloomfield - Toastmaster
10 Sunnen Drive, St. Louis, MO 63143 U.S.A.
(314) 678-6303 www.star-mfg.com
advertisement
Related manuals
advertisement