- Home
- Domestic appliances
- Large home appliances
- Food warmers
- Star Manufacturing
- 35SSA
- Operation manual
Star Manufacturing 35SSA Operation Manual
Add to My manuals12 Pages
Star Manufacturing 35SSA is a combination hot dog steamer and bun warmer, designed for commercial use. The device has a capacity of 170 hot dogs and 18 hot dog buns. It is equipped with a 120-volt, 800-watt heating element and a 11-quart water capacity. The 35SSA has separate compartments for steaming hot dogs and warming buns, allowing for efficient food preparation. The temperature can be controlled using the thermostat control, ensuring optimal cooking and holding temperatures. The device also features a low water level indicator, preventing damage to the heating element.
advertisement
![Star Manufacturing 35SSA Operation Manual | Manualzz Star Manufacturing 35SSA Operation Manual | Manualzz](http://s1.manualzz.com/store/data/008365744_1-657c2c5539f07626a3d821a87cb6959b-360x466.png)
COMBINATION
HOT DOG STEAMER
& BUN WARMER
MODEL
35SSA
70SSA
Installation and
Operation
Instructions
2M-Z5374 Rev. J 6/05/06
8A-35SSA
1
SAFETY SYMBOL
These symbols are intended to alert the user to the presence of important operating and maintenance instructions in the manual accompanying the appliance.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
NOTICE
Using any part other than genuine Star factory supplied parts relieves the manufacturer of all liability.
Star reserves the right to change specifi cations and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
Due to periodic changes in designs, methods, procedures, policies and regulations, the specifi cations contained in this sheet are subject to change without notice. While Star Manufacturing exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusions reached as a result of using the specifi cations. By using the information provided, the user assumes all risks in connection with such use.
MAINTENANCE AND REPAIRS
Contact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.
Model No.
Authorized Service Agent
Reference the listing provided with the unit
Serial No.
Voltage
Purchase Date
or for an updated listing go to:
Website:
Telephone: www.star-mfg.com
(800) 807-9054 Local (314) 781-2777
The Star Service Help Desk
Business
Hours:
8:00 am to 4:30 p.m. Central Standard Time
Telephone:
Fax:
(800) 807-9054 Local (314) 781-2777
(800) 396-2677 Local (314) 781-2714
Website:
www.star-mfg.com
Mailing Address: Star Manufacturing International Inc.
U.S.A
2
2
SPECIFICATIONS
35SSA
Capacity:
Electrical:
170 Hot Dogs, 18 Hot Dog Buns
120 volt, 800 watts, 6.6 amps
230 volt, 800 watts, 3.5 amps
Cord Length - 6 ft.
Plug NEMA Spec - NEMA 5-15P (120V unit)
CEE 7/7 (230V unit)
Water Capacity: 11 Quarts (9 Quarts when using juice tray)
Agency Approvals: UL, ULS, CUL
Dimensions: 14-3/4”W x 16-1/2”D x 15-5/8”H
(37.5cm W x 41.9cm D x 39.7cm H)
70SSA
Capacity:
Electrical:
230 Hot Dogs, 36 Hot Dog Buns
120 volt, 1000 watts, 8.3 amps
230 volt, 1000 watts, 4.3 amps
Cord Length - 6 ft.
Plug NEMA Spec - NEMA 5-15P (120V unit)
CEE 7/7 (230V unit)
Water Capacity: 14 Quarts (12 Quarts when using juice tray)
Agency Approvals: UL, ULS, CUL
Dimensions: 18-3/4”W x 16-1/2”D x 17-5/8”H
(47.6cm W x 41.9cm D x 44.8cm H)
3
CAUTION
This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.
VOLTAGE
The steamer is equipped for use on the voltage specifi ed on the nameplate.
WARNING
DO NOT CONNECT TO ANY OTHER TYPE OF CURRENT OR THE MACHINE
WILL BE SERIOUSLY DAMAGED.
INSTALLATION/OPERATION PROCEDURE
1. Place the unit on a level surface. Pour approximately 9 (Model 35) to approximately
12 (Model 70) quarts of water into the water pan. You can add an additional 2 quarts when not using the juice pan. Do not overfi ll. Using distilled water will prolong the life of the heating element.
2. Turn the switch to “ON” position and set the thermostat control on “HIGH” until steam is generated. Normal heat up time is 30 minutes. Using hot water will reduce heat up time.
3. After pre-heat, place hot dogs on the top or bottom hot dog shelf. Arrange the hot dogs so that there is free circulation of steam. A full load of refrigerated hot dogs will take approximately 45 minutes to reach serving temperature.
4. After the hot dogs are brought up to serving temperature, turn the knob to a 3 or 4 setting and add the buns to the wire rack in the bun compartment. One can control the steam in the bun compartment by opening the water fi ll compartment at the front of the bun compartment.
5. To hold the product, set the thermostat control at setting 3 or 4.
6. Keep the door closed when not serving.
7. Add water as it becomes necessary to maintain the water level. (Add hot water for best results.) All models are equipped with a low water level indicator. When the light comes on, add water.
CAUTION
DO NOT ALLOW THE UNIT TO OPERATE DRY; THIS MAY DAMAGE THE
HEATING ELEMENT. ADD WATER WHEN REQUIRED.
AT THE END OF EACH DAY’S OPERATION
1. Disconnect the power cord from the outlet.
2. Remove any remaining hot dogs and buns.
3. Allow to cool and drain the water through the drain pipe.
4. Remove the inside components of the steamer. It is easiest if the suggested order is followed: a. Remove the divider.
b. Remove the wire bun rack.
c. Remove the top hot dog shelf.
d. Remove the bottom hot dog shelf.
e. Remove the bun shelf.
f. Remove the juice tray.
5. Reverse the order to reassemble the unit.
4
POSSIBLE SOURCES OF TROUBLE AND SUGGESTED REMEDIES
Casing of hot dogs burst.
1) Too much steam is being generated. Move the thermostat control to a lower setting.
2) When using frozen hot dogs, allow them to thaw before putting inside the unit.
Buns too soggy or too dry.
Too much steam or too little steam will produce this condition. Control the amount of steam by adjusting the thermostat control as required or adjust the humidity control lever located in the bun compartment on the bun tray. Do not put buns in the unit while hot dogs are cooking on high. They will be too soggy.
Some buns are better adapted for steaming than others; with some experimentation you will fi nd the one best suited to your needs.
5
Visit our Website at: www.star-mfg.com
THOROUGHLY INSPECT YOUR UNIT ON ARRIVAL
Email: [email protected]
This unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition.
However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.
LIMITED EQUIPMENT WARRANTY
All workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid.
> Star will not assume any responsibility for loss of revenue.
> On all shipments outside the United States and Canada, see International Warranty.
* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.
* The warranty period for the Chrome-Max Griddles is five (5) years on the griddle surface. See detailed warranty provided with unit.
* The warranty period for Teflon/Dura-Tec coatings is one year under normal use and reasonable care. This warranty does not apply if damage occurs to
Teflon/Dura-Tec coatings from improper cleaning, maintenance, use of metallic utensils, or abrasive cleaners. This warranty does not apply to the
“non-stick” properties of such materials.
> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts and ninety (90) days on labor.
> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or the Service Center's sub-agency.
> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and
Operating instructions.
> This warranty is not valid on Conveyor Ovens unless a "start-up/check-out" has been performed by a Factory Authorized Technician.
PARTS WARRANTY
Parts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is chargeable to the customer.
SERVICES NOT COVERED BY WARRANTY
1.
2.
4.
5.
6.
7.
8.
9.
Travel time and mileage rendered beyond the 50 mile radius limit
Mileage and travel time on portable equipment (see below)
3.
Labor to replace such items that can be replaced easily during a daily cleaning routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc.
Installation of equipment
Damages due to improper installation
Damages from abuse or misuse
Operated contrary to the Operating and Installation Instructions
Cleaning of equipment
Seasoning of griddle plates
10. Voltage conversions
11. Gas conversions
12. Pilot light adjustment
13. Miscellaneous adjustments
14. Thermostat calibration and by-pass adjustment
15. Resetting of circuit breakers or safety controls or reset buttons
16. Replacement of bulbs
17. Replacement of fuses
18. Repair of damage created during transit, delivery, & installation OR created by acts of God
PORTABLE EQUIPMENT
Star will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below.
These products should be taken to the Service Agency for repair:
* The Model 510FD Fryer.
* The Model J4R, 4 oz. Popcorn Machine.
* The Model 518CMA & 526CMA Cheese Melter.
* The Model 12MC & 15MC & 18MCP Hot Food Merchandisers.
* The Model 12NCPW & 15NCPW Nacho Chip/Popcorn Warmer.
* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.
* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer.
* All Condiment Dispensers except the Model HPDE, & SPDE Series Dispenser.
* All Specialty Food Warmers except Model 130R, 11RW Series, and 11WSA Series.
* All QCS/RCS Series Toasters except Model QCS3 & RCS3 Series.
ALL:
* Pop-Up Toasters
* Butter Dispensers
* Pretzel Merchandisers
* Pastry Display Cabinets
* Nacho Chip Merchandisers
* Accessories of any kind
* Sneeze Guards
* Pizza Ovens
* Heat Lamps
* Pumps
The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.
FOR ASSISTANCE
Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.
In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.
6
Part# 2M-4497-2 05/06 RB
NC
NO
COM
7
13
42
10 14
12 1
3
7
15
6 31
3
32
11
4
9
2
NUT SUPPLIED
WITH ITEM 22.
33
35
34
22
3(/7.
(%!4
O-RING SUPPLIED
WITH ITEM 22.
5
34
35
37
40
16
NUT AND WASHER
SUPPLIED WITH ITEM 35.
29
20
19
43
40
40
21
26
23
25
41
27
28
THIS DRAWING CONTAINS INFORMATION
CONFIDENTIAL TO STAR MFG. INT'L. INC.
NO REPRODUCTION OR DISCLOSURE
OF ITS CONTENTS IS PERMITTED.
MODEL 35SSA, 70SSA
39
36
18
17
38
8
24
30
STAR MANUFACTURING INTERNATIONAL, INC.
SK1890 REV. B 3/01/06
8
PARTS LIST
June 5, 2006, Rev. J
Key
Number
Part
Number
1 A3-ST3014
A3-ST7009
2 A3-Z5205
A3-Z5324
3
4
5
A3-Z5198
A3-ST3017
A3-ST7010
A3-ST3013
A3-ST7011
6
7
8
A3-Z5204
A3-Z5327
A3-ST3016
A3-ST7012
A3-Z3967
A3-Z4131
9 A3-Z5312
A3-Z5331
10 A3-Z5314
A3-Z5332
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
A3-Z5199
A3-Z5322
A3-Z5360
A3-Z5361
A3-ST3015
A3-ST7013
2A-Z2502
2A-Z5329
A3-Z5313
A3-Z5326
PS-ST3020
2R-Z6850
A3-ST3012
A3-ST7002
2E-Z4183
2E-Z4358
2E-Z1858
2E-Z4148
2J-Z2329
PS-ST7016
2K-7889
A3-ST3006
A3-ST3019
————
A3-35219
2A-Y3405
2P-Y3404
2M-Z5540
2M-Z5539
2M-Z4035
Number
Per
Unit
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Bushing Heyco SR-11-2
Nameplate
Foot
Label - Control Panel
Label - Control Panel
Label - Body
Description and Model Designation
Shelf - Bun
Cover - Bun Shelf
Shelf Assy. - Buns
Shelf Assy. - Buns
Water Assembly
Shelf - Hot Dog
Shelf - Hot Dog
Shelf Assy. - Hot Dogs
Shelf Assy. - Hot Dogs
Bottom
Bottom
Shelf, Top - Hot Dog
Shelf, Top - Hot Dog
Divider
Divider
Chain - Door
Chain - Door
Rod - Hinge
Rod - Hinge
35SSA
70SSA
35SSA
70SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
35SSA
70SSA
Thermostat Replacement Kit, w/knob (manuf. prior to 10-12-2003)
Knob
Assembly - Lower Body
Assembly - Lower Body
35SSA
70SSA
Switch - Lighted
35SSA
70SSA
35SSA
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
INCLUDE MODEL AND SERIAL NUMBER
PAGE
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
1
2
PARTS LIST
June 5, 2006, Rev. J
Key
Number
31
32
33
34
35
36
37
38
39
40
41
42
43
Part
Number
2N-Z5252
2N-Z4058
2N-Z5420
2N-Z4359
2I-Y6404
PS-ST3020
2T-Z7202
2C-1825
2C-2556
2C-1488
2C-2553
2C-6349
2C-Y1451
2C-1640
2C-Y5059
2C-2581
A3-Z7598
N umber
Per
Unit
1
1
1
1
2
1
1
11
11
2
2
6
2
3
4
2
1
Description and Model Designation
Element, 800W / 120V
Element, 1000W / 120V
Element, 800W / 230V
Element, 1000W / 230V
O-Ring
Thermostat Replacement Kit, w/knob (manufactured prior to 10-12-2003)
Thermostat (manufactured after 10-12-2003)
Washer #8 Ext. Stl. NP
Nut 8-32 Hex. Stl. NP
35SSA
70SSA
35SSA
70SSA
Screw 6-32 x 3/8 RHP Stl. NP
Nut 6-32 Hex. Stl. NP
Screw #8 x 3/8 B Thrd. Stl. NP
Rivet 1/8 x .313 Pop Al. Sm.
Screw 8 x 1/4 Type A RH NP
Rivet 3/16 x .675 Pop. Al. Am.
Nut 1/2-20 Br. Acord NP
IMPORTANT: WHEN ORDERING, SPECIFY VOLTAGE OR TYPE GAS DESIRED
INCLUDE MODEL AND SERIAL NUMBER
PAGE
OF
Some items are included for illustrative purposes only and in certain instances may not be available.
2
2
STAR MANUFACTURING
10 Sunnen Drive, St. Louis, MO 63143 U.S.A.
(800) 807-9054 (314) 781-2777
Parts & Service (800) 807-9054 www.star-mfg.com
advertisement