Acer CE-5330 Instructions
إعلان
إعلان
CONTENTS
3 INTRODUCTION
4 Package Contents
5 GETTING TO KNOW YOUR CAMERA
5 Front View
6 Rear View
7 Mode Dial
8 LCD Monitor Information
10 PREPARING THE CAMERA
10 Installing the Batteries
11 Using the AC Power Adapter
12 Inserting and Removing an SD Memory Card (Optional Accessory)
13 GETTING STARTED
13 Turning the Power On/Off
13 Choosing the Screen Language
14 Setting the Date and Time
14 Formatting an SD Memory Card or Internal Memory
15 Using the LCD Monitor
16 PHOTOGRAPHY MODE
16 Shooting Images - The Basics
17 Setting Image Resolution and Quality
18 Using the Zoom Function
19 Using the Flash
20 Using the Self-Timer
21 Adjusting the Exposure (EV Compensation)
21 Setting White Balance
22 USING THE MODE DIAL
22 Auto Mode
22 Program Mode
22 Portrait Mode
23 Landscape Mode
23 Sports Mode
23 Night Mode
24 ADVANCED SHOOTING
24 Burst
24 Auto Exposure Bracketing (AEB)
25 Selecting the Metering Mode
EN-1
26 PLAYBACK MODE - THE BASICS
26 Viewing Images
26 Magnifying Images
27 Thumbnail Display
27 Slideshow Display
28 Resizing an Image
29 VIDEO MODE
29 Recording Video Clips
30 Playing Back Video Clips
31 PLAYBACK MODE – ADVANCED FEATURES
31 Playing Back Still Images/Video Clips on TV
32 Deleting Images/Video Clips
33 Protecting Images/Video Clips
34 Setting the DPOF
36 Connecting to a PictBridge Compliant Printer
39 TRANSFERRING FILES FROM YOUR DIGITAL CAMERA TO
COMPUTER
39 Step 1: Install the USB driver
40 Step 2: Connect the digital camera to your computer
41 Step 3: Download images or video clips
42 EDITING SOFTWARE INSTALLATION
42 Installing NTI Photo Suite
43 USING THE DIGITAL CAMERA AS A PC CAMERA
43 Step 1: Install the PC camera driver
44 Step 2: Connect the digital camera to your computer
44 Step 3: Run your application software (i.e. Windows NetMeeting)
45 MENU OPTIONS
45 Camera Menu
49 Video Menu
50 Playback Menu
52 Setup Menu
55 SPECIFICATIONS
EN-2
INTRODUCTION
Thank you for purchasing the new digital camera!
Equipped with a 5.18 Megapixels CCD sensor, your camera delivers good quality,
2560 x 1920 resolution images. Other features provided by the camera include the following:
5.18 Megapixels
A high-resolution CCD sensor provides 5.18 megapixels for good quality of images.
Auto flash
An auto flash sensor automatically detects the shooting (lighting) conditions and determines whether the flash should be used.
2.0” LTPS color image LCD monitor
Optical zoom: 1x~3x
Digital zoom: 1x~4x
12MB internal (built-in) memory
Images can be captured without using a memory card.
Support for SD memory card for memory expansion
You may wish to expand the memory capacity (up to 512MB capacity) by using an external memory card.
USB connection (USB 2.0 Full speed)
Still images or video clips files that you have recorded can be downloaded to your computer using the USB cable (A USB driver is required for Win 98 and
Win98SE).
DPOF functionality
DPOF can be used to print your images on a DPOF compatible printer by simply inserting the memory card.
PictBridge support
You can connect the camera directly to printer that supports PictBridge and perform image selection and printing using the camera monitor screen and controls.
Provided editing software: NTI Photo Suite
You can enhance and retouch your images on your computer by using the provided editing software.
EN-3
Package Contents
Carefully unpack your kit box and ensure that you have the following items. In the event that any item is missing or if you find any mismatch or damage, promptly contact your dealer.
Common Product Components:
Digital camera
User’s manual
USB cable
Software CD-ROM
Warranty card
Common (Optional) Accessories:
SD memory card
Battery charger
AC power adapter
AV cable
Camera strap
Camera pouch
2 AA batteries
Accessories and components may vary by retailer.
EN-4
GETTING TO KNOW YOUR CAMERA
Front View
1
2
3
5
6
7
8
9
10
4
1. Shutter button
2. Flash
3. Microphone
4. Lens
5. Power button
6. Mode dial
7. Self-timer LED
8. Viewfinder window
9. PC (USB) / AV Out terminal
10.DC in 3V terminal
EN-5
Rear View
1
2
3
4
5
6
7
8
12
13
14
9
10
11
1. Viewfinder
2.
Playback button
3.
4.
Menu button
Delete button
5. OK / (Display) button
6. Tripod socket
7.
/ Zoom out (wide-angle) button
Thumbnail button
8.
/ Zoom in (telephoto) button
9. LCD monitor
10.
S
11.
X
Arrow button (Up)
Arrow button (Right)
12.
13.
T
W
Self-timer button
Arrow button (Down)
Arrow button (Left)
Flash button
14. Battery / SD card cover
EN-6
1.
2.
3.
4.
5.
6.
7.
8.
Mode Dial
You can select from seven shooting modes and setup mode according to shooting conditions to achieve the desired effect.
5
1
2
3
4
6
7
8
9
9.
P
A
Mode
Power button
Program
Auto
Video
Portrait
Landscape
Sports
Night
Setup
Description
Press to turn on/off the power.
Select this mode to permit the shutter speed and aperture to be set automatically.
Select this mode to adjust point-andshoot action.
Select this mode to record video clips.
Select this mode to make people stand out with the background out-of-focus.
Use this mode to take photographs of distant scenery or landscapes.
Use this mode to shoot fast moving objests.
Select this option to take photographs of people against a dusk or night-time background.
Select this mode to adjust the camera settings.
EN-7
LCD Monitor Information
1 2 3
Camera Mode
P 3M
14
13
12
1.5x
1. Mode indication
[
A
] Auto Mode
[ ] Setup Mode
[ ] Video Mode
[ ] Landscape Mode
[
P
] Program Mode
[ ] Sports Mode
[ ] Portrait Mode
[ ] Night Mode
2. Image quality
[ ] FINE
[ ] NORMAL
[ ] ECONOMY
3. Image size
[ ] 2560 x 1920
[ ] 2048 x 1536
[ ] 1280 x 960
[ ] 640 x 480
4. Possible number of shots
5. Internal memory/SD memory card indicator
[ ] Status of internal memory
[
SD
] Status of SD memory card
6. Remaining battery status
[ ] Full battery power
[ ] Medium battery power
[ ] Low battery power
[ ] No battery power
11
4 5 6
8
SD
X1
7
8
9
2004.09.17
10
7. Self-timer mode
[ ] OFF
[ ] 2 sec. delay
[ ] 10 sec. delay
[
10+2
] 10+2 sec. delay
8. White balance
AUTO
[ ] DAYLIGHT
[ ] CLOUDY
[ ] SUNSET
[ ] TUNGSTEN
[ ] FLUORESCENT
9. Capture mode indicator
[
X1
] SINGLE
[ ] BURST
[ ] AEB
10. Date
11. Zoom state
12. Focus area
13. Focus indicator
(no indication for auto focus)
AUTO
[ ] MACRO
[ ] INFINITY
14. Flash mode
[ ] Auto Flash (Default)
[ ] Red Eye
[ ] Forced flash
[ ] No Flash
EN-8
Video Mode
1. Video mode
2. Recordable movie time available
3. SD memory card indicator (if present)
4. Battery power indicator
5. Focus area
5
2
1 00:33 SD
3
4
Image Playback
1. Playback mode
2. SD memory card indicator (if present)
3. Battery power indicator
4. Playback information
1
4
SD
100-0001
SIZE
EV.
01. 04. '04
1280X960
+1.7
05:22
1
2
3
Video Playback
1. Playback mode
2. Video mode
3. SD memory card indicator (if present)
4. Battery power indicator
5. Playback indicator
6. Playback information
2
1
5
6
100-0001
SIZE
EV.
01. 01. '04
320X240
0.0
05:22
SD
1
3
4
EN-9
PREPARING THE CAMERA
Installing the Batteries
You can use 2 AA size batteries to power the camera. Make sure that the power of the digital camera is off before inserting or removing the batteries.
1. Make sure the camera is turned off.
2. Open the battery cover.
3. Insert the batteries in the correct orientation as shown in the illustration.
4. Close the battery cover.
To remove the batteries,turn the camera off before removing batteries and hold the camera with the battery cover facing upward, then open the battery cover.
Be careful not to drop the batteries when opening or closing the battery cover.
EN-10
Using the AC Power Adapter
Use of the AC power adapter is recommended if you intend to use the LCD monitor for a long time or connect the camera to a PC.
1. Make sure your camera is turned off.
2. Connect one end of the AC power adapter to the camera jack labeled "DC
IN 3.0V".
3. Connect the other end to an electrical outlet.
Make sure to use only the AC power adapter specified for the camera. Damage caused by the use of an incorrect adapter is not covered under the warranty.
To prevent unexpected auto power off resulting from no battery power left during the process of transferring your images to the computer, use the AC power adapter as a power supply.
The AC power adapter can only be used to power the camera. Batteries cannot be charged inside the camera.
EN-11
Inserting and Removing an SD Memory Card
(Optional Accessory)
The digital camera comes with 12MB of internal memory, allowing you to store captured still images or video clips in the digital camera. Moreover, you can also expand the memory capacity by using an optional SD (Secure Digital) memory card so that you can store more files.
1. Make sure your camera is turned off before inserting or removing a memory card.
2. Open the SD memory card cover.
3. Insert an SD memory card in the correct orientation as shown in the illustration.
4. Close the battery/SD memory card cover.
To remove the SD memory card, make sure the camera is turned off. Press lightly on the edge of the memory card and it will eject.
Be sure to format an SD memory card with this digital camera before using it. Refer to section in the manual titled “Formatting an SD Memory
Card or Internal Memory” for further details.
To prevent valuable data from being accidentally erased from an SD card, you can slide the write protect tab (on the side of the SD memory card) to “LOCK”.
To save, edit, or erase data on an SD memory card, you must unlock the card.
EN-12
GETTING STARTED
Turning the Power On/Off
Press the button until the digital camera turns on.
To turn the power off, press the button again.
Choosing the Screen Language
Follow the steps below to choose the desired language.
1. Rotate the mode dial to and turn your camera on by pressing the button.
2. Press X to select the [CUSTOM] menu.
3. Use T to select [LANGUAGE], then press the
button.
4. Use S or T to select the language you want.
5. Press the button to confirm.
BASIC
Y/M/D
NTSC
PAL
DATE & TIME
TV
LANGUAGE
LCD BRIGHTNESS
CUSTOM
Y/M/D
NTSC
ENGLISH
SET : 3 / 5
LANGUAGE
ENGLISH
SET : 1 / 7
EN-13
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to and turn your camera on by pressing the button.
2. Press X to select the [CUSTOM] menu.
3. Use T to select [DATE & TIME], then press the button.
You may press W or X to switch the date types.
4. Press the W / X buttons to select Year, Month, Day and Time fields.
To increase a value, press the S button.
To decrease a value, press the T button.
The time is displayed in 24-hours format.
5. Press the button after all fields are set.
BASIC
DATE & TIME
NTSC
PAL
TV
LANGUAGE
SET :
LCD BRIGHTNESS
10
DATE & TIME
00 : 00
CUSTOM
Y/M/D
NTSC
ENGLISH
/ 10 / 2004
1 / 5
SET : SELECT :
Formatting an SD Memory Card or Internal Memory
The term “Formatting” means preparing an “SD Memory Card” to record images; this process is also called “initialization”. This utility formats the internal memory (or memory card) and erases all stored images and data.
1. Rotate the mode dial to and turn your camera on by pressing the button.
The [BASIC] menu is displayed.
2. Use T to select [FORMAT], then press the button.
3. Use S or T to select [YES], then press the button to confirm.
1
BASIC
RESET NUMBER
CUSTOM
ON DATE DATE IMPRINT
FORMAT
QUICK VIEW OFF
SET : 7 / 8
FORMAT
YES
NO
SET :
When you format an SD memory card, be aware that all data of which will be permanently erased. Protected images are also erased.
To format the internal memory, do not insert a memory card into the camera. Otherwise, you will format the memory card.
Formatting is an irreversible action and data cannot be recovered at a later time.
An SD memory card having any problem cannot be properly formatted.
EN-14
Using the LCD Monitor
Your camera is equipped with a 2.0" full color TFT LCD monitor to help you compose images, replay recorded images/video clips or adjust menu settings.
The mode icons, text and numbers displayed on the monitor may vary according to the current settings.
1. Rotate the mode dial to A , P , , , , or .
2. Press the button to turn on the power.
3. Compose your scene on the LCD monitor.
4. Press the shutter button.
The LCD monitor darkens in strong sunlight or bright light. This is not a malfunction.
To prevent your images from being blurred while pressing the shutter button, always hold it carefully. This is especially important when you are shooting under low lighting conditions, which your camera may decelerate the shutter speed to ensure your images are properly exposed.
EN-15
PHOTOGRAPHY MODE
Shooting Images - The Basics
1. Rotate the mode dial to A , P , , , or and turn your camera on by pressing the button.
2. Compose the image on the monitor screen so that the main subject is within the focus frame.
3. Press the shutter button down half way to focus the image.
When you press the shutter button down half way, the camera’s Auto Focus feature automatically focuses the image and exposure.
4. Press the shutter button the rest of the way down to capture the image.
A 3M
1.5x
8 SD
X1
2004.09.17
The actual captured image appears to be larger than the one on LCD after image captured.
Pressing the button switches the LCD monitor display mode. Each time you press the button, the display changes in the following order: Focus Frame On Æ Indicators
Off Æ Composition Line On Æ LCD Off.
EN-16
Setting Image Resolution and Quality
As you get to know the digital camera, you can set the image resolution (number of vertical and horizontal pixels) and image quality (compression ratio) based on the types of images you want to shoot. These settings affect the number of images that can be stored in memory, or on a memory card.
Higher resolution and higher quality images provide finer detail but cause the images’ file size to be larger.
To change image resolution or image quality, perform these steps below:
1. Rotate the mode dial to A , P , , , or and turn your camera on by pressing the button.
2. Press the button.
The [PICTURE] menu is displayed.
3. Use T to select [IMAGE SIZE], then press
IMAGE SIZE
2560 X 1920
2048 X 1536
1280 X 960
640 X 480
1 / 4 the button.
4. Use S or T to select the desired setting, then press the button to confirm.
5. Follow the step 3 and 4 above to set the
[QUALITY].
QUALITY
FINE
NORMAL
ECONOMY
1 / 3
The possible number of shots and recording time depend on the storage size, resolution and quality settings and the subject of the image to be captured.
You can resize the images later. (Please refer to section in this manual titled “ Resizing an Image ” for further detail.)
EN-17
Using the Zoom Function
This camera is equipped with 3x optical zoom. The lens moves during the optical zoom photography, allowing you to capture telephoto and wide-angle shots. By using the optical zoom function; images appear closer by pressing the button, or smaller away by pressing the button.
Moreover, you can further enlarge the subjects with 4x digital zoom by pressing continuously the button. It is activated after your camera reaches its maximum optical zoom factor (3x). A useful feature as it is, however, the more the image is magnified, the grainier the image may become.
To capture a zoomed image, perform the following steps:
1. Press the button to turn on the power.
2. Adjust the magnification ratio by using the / button.
To access the optical zoom function, press the button as far as it can go.
Press it again to activate the digital zoom.
To exit the zoom photography, press continuously the button.
The status of digital magnification is displayed on the LCD monitor.
3. Compose your scene and press the shutter button.
The digital magnification ranges from 1.0x to 4.0x.
As you record video clips, the zoom function cannot be activated.
EN-18
Using the Flash
The flash is designed to function automatically when lighting conditions warrant the use of flash. You can take an image using a desired flash mode to suit your circumstances.
1. Rotate the mode dial to A , P , , , or .
2. Press the button to turn on the power.
3. Toggle W / until your desired flash mode appears on the LCD monitor.
4. Compose your scene and press the shutter button.
The camera has four flash modes:Auto Flash, Red Eye, Forced Flash and No Flash.
The table below will help you to choose the appropriate flash mode:
Flash mode Description
AUTO FLASH The flash fires automatically according to suit the photographic conditions.
RED EYE Use this mode to reduce the red-eye phenomenon when you want to take natural-looking photographs of people and animals in low-light conditions. When taking photographs, the red-eye phenomenon can be reduced by asking the subject (person) to look at the digital camera or get as close to the digital camera as possible.
FORCED FLASH The flash will always fire regardless of the surrounding brightness. Select this mode for recording images with high contrast (backlighting) and deep shadows.
NO FLASH Use this mode in the environment that the flash use is prohibited or under the situation that the distance to the subject is too far away for the flash to have any effect.
EN-19
Using the Self-Timer
The self-timer can be used in situations such as group shots. When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface.
1. Secure the camera to a tripod or place it on a stable surface.
2. Rotate the mode dial to A , P , , , or .
3. Press the button to turn on the power.
4. Toggle X / until your desired self-timer mode appears on the LCD monitor.
10+2
[ No Indication ]
5. Compose your scene and press the shutter button.
The self-timer function is activated.
The photography is then taken after the preset time.
To cancel the self-timer at any time, press the shutter or button, switch the mode dial to another mode or press X to disrupt the sequence.
After one shot is taken, the self-timer mode is turned off.
If you wish to take another image using the self-timer, repeat these steps.
EN-20
Adjusting the Exposure (EV Compensation)
You can manually adjust the exposure determined by the digital camera. Use this mode when the proper exposure cannot be obtained, for example, when the contrast (different between light and dark) between the subject and the background is extremely large. The EV compensation value can be set in the range from
-2.
0EV to +2.0EV.
1. Rotate the mode dial to P , , , or .
2. Press the button to turn on the power.
3. Press , then use X to select the [AE/AWB] menu.
4. Use T to select [EXPOSURE], then use W or X to set the range of EV compensation value from
–2.0EV to +2.0EV.
5. To exit from the menu, press the button.
PICTURE FUNCTION AE/AWB
EXPOSURE +0.7
W.BALANCE
ISO 100
1 / 3
Setting White Balance
This feature lets you make adjustments to compensate for different lighting types according to your shooting conditions.
1. Rotate the mode dial to P , , , or .
2. Press the button to turn on the power.
3. Press , then toggle X to select the [AE/AWB] menu.
4. Use T to select [W. BALANCE], then press the
button.
5. Use S or T to select the desired setting, then press the button to confirm.
6. To exit from the menu, press the button.
PICTURE FUNCTION AE/AWB
EXPOSURE +0.7
W.BALANCE
ISO 100
2 / 3
W.BALANCE
AUTO
DAYLIGHT
CLOUDY
SUNSET
1 / 6
W.BALANCE
TUNGSTEN
FLUORESCENT
5 / 6
EN-21
USING THE MODE DIAL
Auto Mode
A (Auto) mode is the simplest way which allows you to take still pictures without having to set special functions or manual adjustments. The camera sets the optimal focusing and exposure.
1. Rotate the mode dial to A mode and turn your camera on by pressing the button.
2. Compose your subject within the focus frame.
3. Press the shutter button down halfway to focus the image.
When you press the shutter button down half way, the camera’s Auto Focus feature automatically focuses the image and exposure.
4. Press the shutter button the rest of the way down to capture the image.
A 3M
1.5x
8
SD
X1
2004.09.17
Program Mode
In P (Program) mode, the camera automatically sets the shutter speed and aperture for taking still images. You can adjust other functions, such as flash mode or continuous shooting mode.
1. Rotate the mode dial to P mode and turn your camera on by pressing the button.
2. Compose your subject within the focus frame.
3. Press the shutter button to capture the image.
P 3M 8
SD
X1
1.5x
2004.09.17
Portrait Mode
Select this mode to make people stand out with the background out-of-focus.
1. Rotate the mode dial to mode and turn your camera on by pressing the button.
2. Compose your subject within the focus frame.
3. Press the shutter button to capture the image.
3M
1.5x
8
SD
2004.09.17
X1
EN-22
Landscape Mode
This mode allows you to take photographs of distant scenery or landscapes.
1. Rotate the mode dial to mode and turn your camera on by pressing the button.
2. Compose your subject within the focus frame.
3. Press the shutter button to capture the image.
3M 8
SD
X1
1.5x
2004.09.17
Sports Mode
This mode allows you to shoot fast moving objects.
1. Rotate the mode dial to mode and turn your camera on by pressing the button.
2. Compose your subject within the focus frame.
3. Press the shutter button to capture the image.
3M
1.5x
8
SD
X1
2004.09.17
Night Mode
This mode allows you to take photographs of people against a dusk or night-time background.
1. Rotate the mode dial to mode and turn your camera on by pressing the button.
2. Compose your subject within the focus frame.
3. Press the shutter button to capture the image.
3M 8
SD
X1
1.5x
2004.09.17
EN-23
ADVANCED SHOOTING
Burst
This mode is used for continuous shooting. 3 pictures are taken continuously once the shutter button is pressed.
1. Rotate the mode dial to P , , , or and turn your camera on by pressing the button.
2. Press , then use X to select the [FUNCTION] menu.
3. Use T to select [CAPTURE MODE], then press the button.
4. Use S or T to select [BURST], then press the button.
5. To exit from the menu, press the button.
The indicator is displayed on the monitor screen.
6. Press the shutter button halfway to lock the focus.
7. Press the shutter button all the way to shoot.
PICTURE FUNCTION
CAPTURE MODE
X1
SINGLE
BURST
AEB
AUTO
2 / 3
2 / 3
In Burst mode, the flash mode will be set to OFF automatically.
Auto Exposure Bracketing (AEB)
In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range.
1. Rotate the mode dial to P , , , or and turn your camera on by pressing the button.
2. Press , then use X to select the [FUNCTION] menu.
3. Use T to select [CAPTURE MODE], then press the button.
4. Use S or T to select [AEB], then press the button.
5. To exit from the menu, press the button.
The indicator is displayed on the monitor screen.
6. Press the shutter button to shoot.
PICTURE FUNCTION
CAPTURE MODE
X1
SINGLE
BURST
AEB
AUTO
2 / 3
3 / 3
In AEB mode, the flash mode will be set to OFF automatically.
EN-24
Selecting the Metering Mode
You can select the metering mode that sets which part of the subject to measure to determine the exposure.
1. Rotate the mode dial to P , , , or and turn your camera on by pressing the button.
2. Press , then use X to select the [FUNCTION] menu.
3. Use T to select [METERING], then press the button.
4. Use S or T to select the desired metering mode, then press the button.
[ AVERAGE]: Averages the light metered from the entire frame, but gives greater weight to the subject matter at the center.
[ SPOT]: Meters the area within the spot automatic exposure point frame at the center of the LCD monitor.
5. To exit from the menu, press the button.
6. Compose your subject within the focus frame.
7. Press the shutter button to capture the image.
PICTURE FUNCTION
METERING
AVERAGE
SPOT
AUTO
X1
3 / 3
2 / 2
EN-25
PLAYBACK MODE - THE BASICS
Viewing Images
You can display the still images you have just captured at a time.
1. Press the button to turn on the camera.
2. Press the (Playback) button.
The last recorded image appears on the LCD monitor.
3. Use W or X to select the desired images.
To view the previous image, press the W button.
To view the next image, press the X button.
100-0001
SIZE
EV.
01. 04. '04
1280X960
+1.7
05:22
SD
1
The playback information displayed on the LCD monitor will disappear after seconds of time.
If there is no image stored in the internal memory or on the memory card. [NO IMAGE] message will appear on the monitor.
Magnifying Images
While reviewing your images, you may enlarge a selected portion of an image.
This magnification allows you to view fine details. The zoom factor displayed on the screen shows the current magnification ratio.
1. Press the (Playback) button.
The last recorded image appears on the LCD monitor.
To view the previous image, press the W button.
To view the next image, press the X button.
2. Adjust the zoom ration by using the Zoom / button.
To enlarge the selected image, press the button.
To return to the normal image, press the button.
The magnification factor is displayed on the
LCD monitor.
3. To view different portion of the images, press the
S / T / W / X button to adjust the display area.
T
T
T
2.0X
The magnification factors range from 1x to 4x (within 7 stages: 1.0x, 1.5x, 2.0x, 2.5x,
3.0x, 3.5x and 4.0x).
EN-26
Thumbnail Display
This function allows you to view 9 thumbnail images on the LCD monitor simultaneously so you may search for a particular image.
1. Press the (Playback) button.
The last recorded image appears on the LCD m o n i t o r .
2. Press the / button once.
Nine thumbnail images are displayed simultaneously.
For recorded video clips, the video mode icon will be displayed.
3. Use the S / T / W / X button to move the cursor to select the image to be displayed at regular size.
4. Press the button to display the selected image on full screen.
1
4
7
2
5
8
SD
3
6
9
Slideshow Display
The slide show function enables you to play your images back automatically in sequential order. This is very useful and entertaining feature for reviewing recorded images and for presentations.
1. Press the (Playback) button.
The last recorded image appears on the LCD monitor.
2. Press , then use T to select [SLIDE
SHOW] and press the button.
3. Use S or T to set the playback interval, then press the button.
The slide show starts.
The video clips are displayed the first frame image, and not played back.
To stop slide show, press the button.
PLAYBACK
DELETE
SLIDE
SHOW
SLIDE SHOW
PROTECT
QUALITY CHANGE
SLIDE SHOW
3 SEC.
5 SEC.
10 SEC.
2 / 7
SET : RETURN :
You can adjust the slide show display interval within the range of 3 SEC., 5 SEC.,
10 SEC.
EN-27
Resizing an Image
You can change the image size of a captured image to one of the following sizes:
2560 x 1920 pixel, 2048 x 1536 pixel, 1280 x 960 pixel and 640 x 480 pixel.
1. Press the (Playback) button.
The last recorded image appears on the
LCD monitor.
2. In (Playback) mode, use W or X to select the desired images.
To view the previous image, press the W button.
To view the next image, press the X button.
3. Press to access in PLAYBACK menu, then use S or T to select [RESIZE] and press the
button.
4. Use S or T to select the desired setting, then press the button to confirm.
R
DPOF
COPY
PLAYBACK
RESIZE
DPOF
COPY TO CARD
SET :
SET :
EXIT :
RESIZE
2560 X 1920
2048 X 1536
1280 X 960
640 X 480
RETURN :
5 / 7
EN-28
VIDEO MODE
Recording Video Clips
This mode allows you to record video clips with sound via built-in microphone.
1. Rotate the mode dial to mode and turn your camera on by pressing the button.
2. Press the shutter button to start recording.
3. To stop recording, press the shutter button again.
00:49 SD
[ ]
The zoom function of optical zoom (3x) can be activated before you start to record video clips.
Pressing the button switches the LCD monitor display mode. Each time you press the button, the display changes in the following order: Focus Frame On Æ Indicators
Off Æ Composition Line On Æ LCD Off.
EN-29
Playing Back Video Clips
You can play back recorded video clips. A guide to operation appears on the LCD monitor during the video playback.
1. Press the (Playback) button.
2. Use W or X to go through the images until the video clip you want to play back is displayed.
To view the previous image, press the
W button.
To view the next image, press the X button.
3. Press the button to start playing back the video clips.
To pause or resume video playback, press the button again.
100-0001
SIZE
EV.
01. 04. '04
320X240
0.0
05:22
SD
1
The playback information displayed on the LCD monitor will disappear after seconds of time.
The zoom function cannot be activated while playing the video clips back.
To playback the video clips on the computer, we recommend you to use Windows Media
Player 9.0 (WMP 9.0).
You can download WMP version from the website at www.
microsoft.com.
EN-30
P L A Y B A C K M O D E – A D V A N C E D
FEATURES
Playing Back Still Images/Video Clips on TV
You can also playback your images on a TV screen. Before connecting to any device, make sure to select NTSC/PAL system to match the video output system of the video equipment you are going to connect to the digital camera, then turn all connected devices off.
1. Connect one end of the A/V cable to the
A/V terminal of the digital camera.
2. Connect the other end to the A/V input socket of the TV set.
3. Turn the TV and digital camera on.
4. Playback the images/video clips.
The method of operation is the same as playing back still images and video clips on the digital camera.
VT
The sound recorded with video clips can only be played back on TV or computers.
EN-31
Deleting Images/Video Clips
Use this function to delete one or all images/video clips stored in the internal memory or memory card. Please note that the deleted images or video clips cannot be recovered. Exercise caution before deleting a file.
To delete the latest single image/video clip
1. Press the button to turn on the power.
2. Press . When the delete message appears, use S or T to select [YES], then press the button to delete the last image or video clip.
If you wish to cancel the deletion, select [NO].
DELETE
YES
NO
SET :
To delete image/video clip by preference
1. Press the (Playback) button.
The last recorded image appears on the LCD monitor, which can also be deleted directly by pressing .
2. Use W or X to select the image you want to delete.
3. Press , then use S or T to select
[DELETE] and press the button.
4. Use S or T to select [THIS IMAGE] or
[ALL IMAGES] by your preference, then press the button.
5. When the delete message appears, use
S or T to select [YES], then press the
button to confirm the deletion.
If you wish to cancel the deletion, select
[NO].
SET :
SET :
PLAYBACK
DELETE
SLIDE SHOW
PROTECT
QUALITY CHANGE
EXIT :
DELETE
THIS IMAGE
ALL IMAGES
RETURN :
1 / 7
Protected images cannot be deleted with the delete function.
EN-32
Protecting Images/Video Clips
Set the data to read-only to prevent images from being erased by mistake.
1. Press the (Playback) button.
The last recorded image appears on the LCD monitor.
2. In (Playback) mode, use W or X to select the desired images.
To view the previous image, press the
W button.
To view the next image, press the X button.
3. Press , then use T to select [PROTECT] and press the button.
4. Use S or T to choose the desired setting, then press the button.
[PROTECT ONE]: Protect one image/ movie.
[PROTECT ALL]: Protect all images/ movies (at once).
5. Use S or T to select [LOCK], then press the button to confirm.
Press to return to the (Playback) mode.
The indicator appears on the selected image.
If you wish to cancel the protect function, select [UNLOCK].
SLIDE
SHOW
PLAYBACK
DELETE
SLIDE SHOW
PROTECT
QUALITY CHANGE
SET :
SET :
PROTECT
PROTECT ONE
PROTECT ALL
RETURN :
PROTECT ONE
LOCK
UNLOCK
RETURN :
3 / 7
EN-33
Setting the DPOF
DPOF (Digital Print Order Format) allows you to embed printing information on your memory card. By using DPOF, you can select an image to be printed and then specify how many prints or which image you would like. Take your memory card to a DPOF enabled printer that accepts memory cards. The DPOF/cardcompatible printer will read the embedded information on the memory card and print your images as specified.
To configure print settings for a single image / all images.
Step Figure
1
SD
100-0001
SIZE 1280X960
EV.
01.04. '04
+1.7
05:22
1
2
R
DPOF
PLAYBACK
RESIZE
DPOF
COPY
COPY TO CARD
Procedure
Press the (Playback) button, then use W or X to select the desired image you want to mark .
* The playback information displayed on the LCD monitor will disappear after seconds of time.
Press the button. Use S or T to select [DPOF], then press the button.
3
4
SET :
SET :
EXIT : 6 / 7
DPOF
ONE IMAGE
ALL IMAGES
RESET ALL
RETURN :
ONE IMAGE
QUANTITY
DATE
RETURN
8
NO
ONE IMAGE
QUANTITY
DATE
RETURN
8
NO
Use S or T to select by your preference, then press the button.
[ONE IMAGE]: To configure print settings for a single image.
[ALL IMAGES]: To configure print settings for all images.
[RESET ALL]: Returns all basic settings to the digital camera’s default settings.
Use S or T to select by your preference, then press the button.
[QUANTITY]: Allows you to select image quantity
(0~10). Use W or X to set the image
[DATE]: quantity.
The date of recording can be printed
[RETURN]: directly on the images.
Choose [YES] or [NO] with W or X .
To exit the mark function, use S or T to select [RETURN], then press the button.
EN-34
Step Figure
SD
Procedure
Press to return to the image playback mode.
* The is marked on the displayed image.
5
SET :
DPOF
ONE IMAGE
ALL IMAGES
RESET ALL
RETURN :
To unmark the mark, go back to step 3 to select
[RESET ALL] with S or T .
Before you perform the DPOF settings on your camera, always remember to copy your images from the internal memory to an SD memory card first.
The print icon will appear on the monitor indicating images selected for printing.
You cannot print movies.
EN-35
Connecting to a PictBridge Compliant Printer
Even if you do not have a computer, you can connect the camera directly to a printer that supports PictBridge to perform image selection and printing using the camera monitor screen and controls. DPOF support also lets you specify which images you want to print and how many copies of each should be printed.
Connecting the camera to the printer
1. Rotate the mode dial to and turn your camera on by pressing the button.
2. Press X to select the [CUSTOM] menu, then use T to select[USB].
3. Press the button.
4. Use S or T to select [PRINT], then press the button.
5. Connect your camera and the printer via a supplied USB cable.
The screen turns off automatically and the setting screen wil appear on the monitor after seconds of time.
SET: OK
USB
PC
PC CAM.
2 / 3
Printing images
When the camera is properly connected to a PictBridge compliant printer, the
[PRINT MODE SELECT] screen is displayed on the monitor. Use S or T to select the print mode.
In [PRINT] Mode : Lets you print the specified image with PictBridge.
Step Figure
1
PRINT MODE SELECT
PRINT ORDER
Procedure
Use S or T to select the [PRINT] mode, then press the button.
* The [PRINT PAPER] screen is displayed.
2
SELECT: SET: OK
PRINT PAPER
SIZE
BORDERLESS
STANDARD
STANDARD
SELECT: SET: OK
Use S or T to access in the selection of paper setting, then press the button to confirm.
[SIZE]: You may select the desired item depending on the type of printer being used.
[BORDERLESS]: You may select the desired item depending on the type of printer being used.
EN-36
Step
6
7
3
4
5
Figure Procedure
Use W or X to select the image you want to print, then press T to proceed more detailed settings.
* The [PRINT INFO] screen is displayed.
SELECT :
CANCEL :
PRINT : OK
MORE :
DATE
PRINT INFO
FILE NAME
CANCEL
8
WITH
WITH
SELECT: SET: OK
Use S or T to select by your preference, then press the button.
[ x ] :
[DATE]:
Specifies the number of prints. You can select the number up to 10.
If you select WITH, images are printed with the date.
[FILE NAME]: If you select WITH, images are printed with the file name.
[CANCEL]: To cancel the print settings, use to select [CANCEL].
S or T
After the step 4 finished, you can still use W or X to change the image by your preference, then press the
button to print.
SELECT :
CANCEL :
PRINT : OK
MORE :
CANCEL
Use S or T to select [PRINT], then press the button to confirm.
* The TRANSFERRING screen is displayed.
SELECT: SET: OK
This starts printing and displays the message
“TRANSFERRING” on the monitor screen.The message will disappear after the printing finished.
T R A N S F E R R I N G
CANCEL :
SELECT:
CONTINUE
CANCEL
SET: OK
* To cancel printing:
Pressing the button during print data transfer displays the screen for selecting whether to
[CONTINUE] or [CANCEL] printing.
EN-37
In [PRINT ORDER] Mode : This function only lets you print the specified image based on the previous DPOF settings.
Step Figure
1
PRINT MODE SELECT
PRINT ORDER
Procedure
Use S or T to select the [PRINT ORDER] mode, then press the button.
* The [PRINT PAPER] screen is displayed.
2
3
SELECT: SET: OK
PRINT PAPER
SIZE
BORDERLESS
STANDARD
STANDARD
SELECT:
CANCEL
SET: OK
Use S or T to access in the selection of paper setting, then press the button to print.
[SIZE]: You may select the desired item depending on the type of printer being used.
[BORDERLESS]: You may select the desired item depending on the type of printer being used.
Use S or T to select [PRINT], then press the button to confirm.
* The TRANSFERRING screen is displayed.
SELECT: SET: OK
T R A N S F E R R I N G
This starts printing and displays the message
“TRANSFERRING” on the monitor screen. The message will disappear after the printing finished.
4
CANCEL :
SELECT:
CONTINUE
CANCEL
SET: OK
* To cancel printing:
Pressing the button during print data transfer displays the screen for selecting whether to
[CONTINUE] or [CANCEL] printing.
EN-38
TRANSFERRING FILES FROM YOUR
DIGITAL CAMERA TO COMPUTER
After using USB cable to establish a USB connection between the camera and your computer, you can use your computer to share recorded images or video clips with your family or friends via e-mail or post them on the Web. In order to do this, you must install the USB driver onto your computer first. Note that before you begin to install the software, you need to check your system according to the table as shown below.
CPU
System Requirements
(Windows)
Pentium III 600 MHz processor or higher
Operating System Windows 98/98SE/ME/2000/XP
RAM 32MB
(64MB RAM recommended)
System Requirements
(Macintosh)
PowerPC G3/G4
OS 9.0 or higher
32MB
(64MB RAM recommended)
Hard Disk Space 128MB hard disk space
Required Devices A CD-ROM drive
Display
An available USB port
Color Monitor (800x600, 24-bit higher recommended)
128MB hard disk space
A CD-ROM drive
An available USB port
Color Monitor (800x600,
24-bit or higher recommended)
EN-39
Step 1: Install the USB driver
Installation on Windows 98 & 98SE
The USB driver on the supplied CD-ROM is exclusively for Windows 98 and 98SE.
Windows 2000/ME/XP users need not install the USB driver.
1. Insert the enclosed CD-ROM into your CD-ROM drive.
2. When the welcome screen appears, click “ INSTALL USB DRIVER “.
Follow the on-screen instructions to complete the installation.
3. After the USB driver has been installed, restart your computer.
Installation on MAC OS 9.0
For Mac OS 9.0 or higher, the computer will automatically recognize the digital camera and load its own USB drivers.
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing the button.
2. Press X to select the [CUSTOM] menu, then use T to select [USB].
3. Press the button.
4. Use T to select [PC], then press the button.
5. Connect one end of the USB cable to an available USB port on your computer.
6. There will be a new “Removable Disk” icon detected in “My Computer”, in which contains your recorded images or video clips.
(For Mac users, double-click [untitled] or
[unlabeled] disk drive icon on our desktop.)
USB
PC
PC CAM.
1 / 3
EN-40
Step 3: Download images or video clips
When the digital camera is turned on and connected to your computer, it is considered to be a disk drive, just like a floppy disk or CD. You can download
(transfer) images by copying them from the “Removable disk” (“untitled” or
“unlabeled” disk on a Macintosh) to your computer hard drive.
Windows
Open the “removable disk” and double click on the DCIM / DSCIM folder to open it to find more folders. Your images are inside these folder(s). Select the desired still images or video clips and then choose “Copy” from the “Edit” menu. Open the destination location (folder) and choose “Paste” from the “Edit” menu. You may also drag and drop image files from the digital camera to a desired location.
Macintosh
Open the “untitled” disk icon, and the destination location on your hard disk. Drag and drop from the digital camera to the desired destination.
Memory card users may prefer to use a memory card reader (highly recommended).
Video playback application is not included with the package. Make sure that video playback application has been installed in your computer.
EN-41
EDITING SOFTWARE INSTALLATION
Installing NTI Photo Suite
PC users will find that NTI Photo Suite is a very user-friendly image-editing program.
With NTI Photo Suite, you can retouch, compose, and organize your images. It includes a variety of templates, such as photo frames, birthday cards, calendars and more. Get your images ready and explore this amazing program.
To install NTI Photo Suite:
1. Insert the CD-ROM that came with the camera into your CD-ROM drive.
The welcome screen appears.
2. Click “ INSTALL NTI PHOTO SUITE ”.
Follow the onscreen instructions to complete the installation.
To use NTI Photo Suite to edit and retouch your recorded images, please refer to the on-line help.
For Windows 2000/XP users, please make sure to install and use the NTI Photo Suite in “Administrator” mode.
NTI Photo Suite is not supported on the Mac. iPhoto or iPhoto2 is recommended.
EN-42
USING THE DIGITAL CAMERA AS A PC
CAMERA
Your digital camera can act as a PC camera, which allows you to videoconference with business associates, or have a real-time conversation with friends or family.
To use the digital camera for videoconferencing, your computer system must include the items as below:
Microphone
Sound card
Speakers or headphones
Network or Internet connection
Video conferencing (or video editing) software is not included with the digital camera.
This mode is not supported for Mac.
Step 1: Install the PC camera driver
The PC-camera driver included in the CD-ROM is exclusively for Windows. The PC camera function is not supported for Mac platforms.
1. Insert the enclosed CD-ROM into your CD-ROM drive.
2. When the welcome screen appears, click “ DRIVER For PC CAM ”.
Follow the on-screen instructions to complete the installation.
3. After the driver installation is completed, restart your computer.
EN-43
Step 2: Connect the digital camera to your computer
1. Rotate the mode dial to and turn your camera on by pressing the button.
2. Press X to select the [CUSTOM] menu, then use T to select [USB].
3. Press the button.
4. Use S or T to select [PC CAM.], then press the button.
5. Connect one end of the USB cable to an available USB port on your computer.
6. Position the digital camera steadily on top of your computer monitor or use a tripod.
USB
PC
PC CAM.
3 / 3
When using this digital camera as a PC camera, it is necessary to install the battery into the digital camera.
Step 3: Run your application software (i.e. Windows
NetMeeting)
To use Windows NetMeeting for videoconferencing:
1. Go to Start
Æ
Programs
Æ
Accessories
Æ
Communications
Æ
NetMeeting to launch the NetMeeting program.
2. Click the Start Video button to view live video.
3. Click the Place Call button.
4. Type the e-mail address or the network address of the computer that you are calling.
5. Click Call. The person that you are calling must also have Windows NetMeeting running and be willing accept your call to start the videoconference.
The video resolution for videoconferencing applications is generally 320 x 240.
For more information about the operation of videoconference application software, refer to its respective help documentation.
EN-44
MENU OPTIONS
Camera Menu
This menu is for the basic settings to be used when capturing still images.
Q
[ ]
AUTO
IMAGE SIZE
QUALITY
FOCUS
5M
AUTO
X1
1 / 4
PICTURE FUNCTION
Q
IMAGE SIZE
QUALITY
SHARPNESS
COLOR
5M
LOW
1 / 5
PICTURE FUNCTION
AUTO
X1
1 / 3
PICTURE FUNCTION AE/AWB
EXPOSURE +0.7
W.BALANCE
ISO 100
1 / 3
1. Rotate the mode dial to A , P , , , or and turn your camera on.
2. Press , then use W or X to select the [PICTURE] / [FUNCTION] / [AE/AWB] menu.
In A (Auto) Mode, press to access in menu directly.
3. Press S or T to select the desired setting, then press the button.
4. To exit from the menu, press the button.
In A (Auto) Mode
I tem Functional Description
IMAGE SIZE Sets the size of the image that will be captured.
* 2560x1920
* 2048x1536
* 1280x960
* 640x480
QUALITY
Q
Sets the quality (compression rate) at which the image is captured.
* FINE
* NORMAL
* ECONOMY
EN-45
I tem
FOCUS
CAPTURE
MODE
Functional Description
You can take images with the distance to the subject set by auto focus, macro or infinity.
* AUTO
*
*
MACRO
INFINITY
Sets the recording method at the time of taking pictures.
*
*
X1
SINGLE
BURST
* AEB
In P , , , or Mode
PICTURE Item
IMAGE SIZE
Functional Description
Refer to “Camera Menu - In
LIST OF MENU OPTIONS.
A (Auto) Mode” in
QUALITY
Q
SHARPNESS
Refer to “Camera Menu - In A (Auto) Mode” in
LIST OF MENU OPTIONS.
Sets the level of image sharpness.
* LOW
*
*
MEDIUM
HIGH
EN-46
PICTURE
FUNCTION
Item
COLOR
Functional Description
Sets the color of the image that will be captured.
* FULL COLOR
*
*
BLACK & WHITE
SEPIA
SATURATION To capture an image, your camera offers you three different degrees of color to match with your preference.
Your images will demonstrate different impression by selecting different degrees of color. This is called “Saturation”.
* LOW
* MEDIUM
* HIGH
Item
FOCUS
Functional Description
Refer to “Camera Menu - In A (Auto) Mode” in
LIST OF MENU OPTIONS.
CAPTURE
MODE
Refer to “Camera Menu - In A (Auto) Mode” in
LIST OF MENU OPTIONS.
METERING Refer to section in this manual titled “Selecting the Metering Mode” for further details.
EN-47
AE/AWB Item Functional Description
EXPOSURE Sets to obtain the correct exposure when the subject is much brighter or darker than the
EV background.
The EV compensation value can be set in the range from –2.0EV to +2.0EV.
W. BALANCE Sets the white balance photographing under a variety of lighting conditions and permits
WB photographs to be taken that approach the conditions that are seen by the human eye.
* AUTO
*
*
DAYLIGHT
CLOUDY
*
*
*
SUNSET
TUNGSTEN
FLUORESCENT
ISO
ISO
Sets the sensitivity for taking pictures. When the sensitivity is raised (and the ISO figure isincreased), photography will become possible even in dark locations, but the more pixilated
(grainer) the image will appear.
*AUTO / 50 / 100 / 200
EN-48
Video Menu
This menu is for the basic settings to be used when recording video clips.
R
G B
COLOR
VIDEO
SET : SET :
COLOR
FULL COLOR
BLACK & WHITE
SEPIA
EXIT : 1 / 3
EXIT : 1 / 1
1. Rotate the mode dial to mode and turn your camera on.
2. Press the button.
3. Press the button to access the [COLOR] menu.
4. To exit from the menu, press the button.
Item
COLOR
Functional Description
REFER TO “Camera Menu-In the P , , , or
Mode” of MENU OPTIONS.
EN-49
Playback Menu
In the (Playback) menu, set which settings are to be used for playback.
R
DPOF
COPY
PLAYBACK
RESIZE
DPOF
COPY TO CARD
SET : EXIT : 5 / 7
1. Press the (Playback) button.
The last recorded image appears on the LCD monitor.
2. Press , then use S or T to select the desired setting and press the button.
3. To exit from the playback menu, press the button.
Item Functional Description
DELETE Delete one or all images you captured.
* Refer to section in this manual titled is “Deleting Images/Video
Clips¨ for further details.
SLIDE SHOW You can play back recorded images in order with a selected
SLIDE
SHOW interval time.
This function is useful for checking your images or for presentations, etc.
* Refer to section in this manual titled “Slideshow Display” for
further details.
* 3 SEC. / 5 SEC. / 10 SEC.
PROTECT Set the data to read-only to prevent images from being erased by mistake.
* Refer to section in this manual titled “Protecting images/
Video clips” for further details.
EN-50
Item
QUALITY
CHANGE
RESIZE
R
DPOF
DPOF
COPY TO
CARD
COPY
Functional Description
Change to set the desired quality (compression rate) at which the image is captured.
* FINE
* NORMAL
* ECONOMY
Changes the size of a recorded image.
* 2560x1920
* 2048x1536
* 1280x960
* 640x480
Allows you to select the desired pictures to be printed and set the number of prints and date displayed in DPOF format. You can print images easily just by inserting the memory card to a
DPOF-compatible printer or a print shop. Refer to section in this manual titled “Setting the DPOF” for further details.
Allows you to copy your files from the digital camera’s internal memory to a memory card. Of course, you can only do this if you have a memory card installed and some files in internal memory.
* YES / NO
EN-51
Setup Menu
This feature allows you to set up the default settings by preference for using your camera.
POWER OFF
DIGITAL ZOOM
SET TO DEFAULT
LOUDER
3 MIN.
ON
1
BASIC
RESET NUMBER
CUSTOM
ON DATE IMPRINT
FORMAT
QUICK VIEW OFF
SET : 5 / 8
BASIC
Y/M/D
NTSC
PAL
DATE & TIME
TV
LANGUAGE
LCD BRIGHTNESS
CUSTOM
Y/M/D
NTSC
ENGLISH
SET : 1 / 5 SET :
BASIC
USB
CUSTOM
PC
5 / 5
1. Rotate the mode dial to (Setup) mode and turn your camera on.
2. Press W or X to select the [BASIC] / [CUSTOM] menu.
3. Use S or T to select the desired option item, then press the button.
4. To exit from the setup menu, rotate the mode dial to other desired mode again.
BASIC settings
Item Functional Description
BEEPER This sets whether or not to mute the startup sound and the
camera sound each time you press the camera button.
* LOUDER / SOFT / OFF
POWER OFF If no operation is performed for a specific period of time, the
power to the camera is automatically turned off. This feature
is useful to reduce battery wear.
* 2 MIN. / 3 MIN. / 5 MIN. / OFF
DIGITAL ZOOM This sets whether or not to use digital zoom at the time of
photography.
* ON / OFF
EN-52
Item Functional Description
SET TO
DEFAULT
D
RESET
NUMBER
1
Returns all basic settings to the digital camera’s default
settings. The time setting will not be reset.
* YES / NO
Set whether or not to reset the file number when you take
photographs. This creates a new folder. The captured images
are recorded to the newly created folder from number 0001.
If you want to reset the file number, be sure that no images
are recorded in the internal memory or the SD memory card.
* YES / NO
DATE IMPRINT The date of recording can be printed directly on the still images.
DATE This function must be activated before the image is captured.
* ON / OFF
FORMAT Erases all images and reformats the SD card loaded in your
camera. Protected images are also erased. SD card cannot
be formatted if it is write-protected.
Refer to section in this manual titled “Formatting an SD Memory
Card or Internal Memory” for further details.
* YES / NO
QUICK VIEW Set to display a photographed image on LCD monitor
immediately after you have taken the shot.
* ON / OFF
EN-53
CUSTOM settings
Item Functional Description
DATE & TIME This sets the date and the time.
Y/M/D
Refer to section in this manual titled “Setting the Date and
Time” for further details.
* Y/M/D
* D/M/Y
* M/D/Y
TV
NTSC
PAL
Sets video output system of the video equipment that you are going to connect to the camera.
* PAL / NTSC
LANGUAGE Sets the language that is displayed on the LCD monitor.
Refer to section in this manual titled “Choosing the Screen
/
Language” for further details.
* ENGLISH / FRANÇAIS / DEUTSCH / ESPAÑOL/ ITALIANO
/
LCD This sets the brightness of the LCD monitor.
BRIGHTNESS The adjustment range is from -5 to +5.
USB Select to choose one of the following modes for further settings.
* PC / PRINT / PC CAM.
EN-54
SPECIFICATIONS
Item
Image Sensor
Effective pixels
Image size
Image quality
Recording media
File format
Lens
Description
CCD
5.18 Mega pixels
Still image: 2560 x 1920, 2048 x 1536, 1280 x 960,
640 x 480
Video clip: 320 x 240 (20 fps)
Still image: Fine, Normal, Economy
Movie image: Economy
12MB internal memory
SD memory card (Optional, up to 512MB)
Motion JPEG (AVI); PictBridge support
PC-CAM support (QVGA @ 20fps)
F-no.: Wide: 2.8 / Tele: 4.8
Focal length: 5.4mm-16.2mm (Equivalent to 35mm
Camera: 32~96 mm)
Focus range
LCD monitor
Normal: 50 cm-infinity
Wide: 6 cm-infinity
Tele: 35 cm-infinity
2.0” LTPS TFT-LCD
Self-timer
High-resolution 130K pixels display
10 sec delay, 2 sec delay, 10+2 sec delay
Exposure compensation -2.0EV~ +2.0EV (in 0.3EV increments)
White balance Auto, Daylight, Cloudy, Sunset, Tungsten, Fluorescent
ISO
Interface
Power
Dimension
Weight
Auto, 50, 100, 200
DC-IN jack, USB connector, A/V terminal
2 AA batteries
AC-DC Adapter (3V/2.5A)
Approx. 91 x 61 x 27 mm
Approx. 130g (without batteries and the SD memory card)
* Design and specifications are subject to change without notice.
EN-55
تنزيل
تم تحديث الرابط العام
رابط عام للمستند
إعلان
الميزات الرئيسية
5.18 MP CCD Silver
Optical zoom: 3x Digital zoom: 4x
PictBridge
Nickel-Metal Hydride (NiMH)