KEEP YOUR CAMERA CLEAN
If necessary, gently dust the lens and view-
finder with a well-washed handkerchief, or
use ‘Kodak’ Lens Cleaner. Keep fingers away
from the lens and viewfinder.
KEEP YOUR CAMERA SAFE
Protect your camera with the "Kodak" Ever
Ready Case, Code 797, and always use the
strap.
KEEP YOUR CAMERA READY
Always keep your camera set to the prevailing
weather condition and loaded with a Kodapak'
Cartridge — you'll always be ready for a
picture,
KODAK PUBLICATIONS
Ask your dealer to show you "BETTER
PICTURES, Simply” (price 1s 0d), and the
many other "Kodak publications — you will
find them packed with useful hints and tips to
help you take better and more interesting
pictures.
Instametic and product names quoted thus = "Kodak" =
are trade marks.
KODAK LIMITED LONDON
Printed la England S136 ITPSAT/deHC 70) 3.65
Kodak
INSTAMATIC 204
CAMERA
instructions
When you first get your camera, it's a good
idea to take some pictures outdoors, and
indoors with flash. This will give you practice
before you set out to take important pictures.
Your pictures cannot be spoiled by double
exposures. Once the picture has been taken,
the shutter will not operate again until you
have wound on fully to the next exposure.
NOTE: You cannot operate the camera without a
"Kodapak’ cartridge loaded into it.
2
Kodak Films
For superb colour transparencies, colour
prints or black-and-white prints, ask your
dealer for ‘Kodak’ size 126 films in the
‘Kodapak’ Cartridge.
‘Kodachrome-X" Film — for 20 colour trans-
parencies. The price of the film includes
processing. Post exposed film direct to a
Kodak Processing Laboratory. Your colour
transparencies will be returned to you mounted
in 2x2-inch (5x5em) cardboard mounts,
ready for projection.
‘Ektachrome-X" Film = for 20 colour trans-
parencies, mounted in Z>XZ-inch (5x5cm)
cardboard mounts ready for projection.
Exposed "Ektachrome-X' Film may be taken to
any Kodak dealer for processing.
‘“Kodacolor-X" Film —for 12 colour prints.
Standard 31 x33-inch (9x9em) colour prints
or bigger enlargements, can be made from
your 28x28mm negatives. Ask your dealer
for prints and enlargements on ‘Kodak’ Paper.
"Verichrome" Pan Film = for 12 black-and-
white prints. Standard 314 31-inch (9>x9cm)
black-and-white prints, or bigger enlarge-
ments, can be made from your 28x28mm
negatives. Order prints from your Kodak
dealer.
2 LOAD
4 WIND REPEATEDLY
UNTIL LEVER LOCKS
Operate the FILM ADVANCE lever repeatedly,
as far as it will go, until the mechanism locks —
About 12 full strokes to first exposure
About 1% full strokes between pictures
IMPORTANT: When winding on, disregard
the number in the window in the camera back,
This number (it may appear in duplicate)
serves only as an exposure counter. Wind
repeatedly until the lever locks.
д.
Taking the Picture
1 View the picture with your eye close to, and
centred on, the rear viewfinder window. Don't
obstruct the lens (with fingers, case or strap).
2 Generally, keep at least 5 feet from your
subject for sharp pictures outdoors (but in
bright sun, you may stand as close as 3 feet).
For flash pictures, you must keep within the
distances shown in the table on page 7.
3 Hold the camera firmly and press the
SHUTTER RELEASE steadily to take the picture.
Take care not to jerk the camera.
4 Wind until the lever locks (about 14 full
strokes). You are ready forthe next picture.
Outdoor Pictures
For pictures Outdoors, simply set the
DAYLIGHT POINTER to the weather condition.
SHUTTER RELEASE
Flash Pictures
For Flash pictures indoors: Load
the batteries (see page 9). Fit a
| fresh Flashcube (see page 6).
— Set FLASH POINTER to the flash-
to-subject distance.
DAYLIGHT POINTER
a
3 be
CLOUDY DULL or
SHADE, sun not visible
OPEN
CLOUDY BRIGHT, no shadows
Cast
WEAK HAZY SUN, soft shadows
cast
BRIGHT SUN, distinct shadows
cast
E
FLASHCUBE SOCKET
FLASH POINTER
EJECTOR BUTTON
— When set to You may stand
Sft (1m) 3—5ft (1-1 -5m)
6ft (2m) 5-—7ft (1-5—2m)
9ft (3m) 7—10ft (2-3m)
12ft (4m) 8-14ft (2-5—4m)
from your subject
7
The Flashcube
Your camera accepts the four-shot Flashcube
enabling you to take up to four flash pictures in
rapid succession without the need to change
bulbs. The flashbulb will fire automatically
when you take the picture. After each shot
the Flashcube automatically rotates one
quarter turn to bring a fresh bulb into position.
To fit a Flashcube, simply locate the hollow
stem over the central post of the Flashcube
socket on the camera body, with one face of
the cube towards the front of the camera.
Press the cube down until it clicks into place.
To release a used (or partly-used) Flasheube,
press the EJECTOR BUTTON on the camera
front.
If fitting a partly-used Flashcube, make sure
that it is fitted in the correct position with an
unused bulb to the front and the next unused
bulb to the left (strap end) of the camera.
The cube may be rotated clockwise (in the
direction of the arrow on the camera) by hand,
to position the correct bulb.
NOTE
®@ Do not obstruct the rotation of the Flasheube
@ Lo not use a bulb if the blue spot at the front has
turned pink
@ Never take flash pictures in an explosive atmosphere
Flash Batteries
Two batteries are required.
Use only Mallory Mn-2400, Ever Ready HP16
or Berec HP16. Other batteries are not
recommended. Replace HP15 batteries at
least every 12 months.
LOAD CLOSE FULLY
To install, slide open the battery compartment
in camera base. Insert batteries, one base up
and one base down. Close the cover fully.
IMPORTANT: For good flash operation: —
© Clean the battery ends occasionally with a
rough cloth
® Check that batteries are fresh
® Ensure that battery cover is fully closed
® Remove batteries if camera is stored
Unloading
After the last picture has been taken WIND
REPEATEDLY UNTIL ALL THE YELLOW
PAPER WITH THE X's HAS DISAPPEARED.
OPEN THE CAMERA, REMOVE THE EX-
FOSED CARTRIDGE AND RE-LOAD WITH
A FRESH ONE.
NOTE: Do not remove the cartridge from the
camera before all the yellow paper, with the
X's, has bean moved past the window; other-
wise several exposures will be “light-fogged™.
Removing and replacing partially-exposed
cartridges, even under darkroom conditions,
may result in loss of one exposure due to slight
“creeping” of the film during removal.
10
Hints and Tips
[] Keep important parts of the subject well
away from the edge of the viewfinder.
] Watch the background —if it is not im-
portant, keep it plain.
[| For colour pictures, make sure the sun is
falling directly on the front of the subject.
[Q For colour portraits (or groups) by flash, a
better appearance of the eyes will result if the
room is well lighted.
[] For better colour slides of distant views,
sea and snow pictures, use a 'Kodisk” Haze
Filter, No. 255.
[] For close-ups between 2 feet and 3% feet,
use a ‘Kodisk’ Close-up Lens No. 255. But
remember with close-Ups, to allow a little
extra space at the top of your picture. If in
doubt, ask your dealer for a free copy of the
Kodak leaflet “Don't Lose Your Head".
[] Outdoors, when the light is extremely
poor, flash may be used to take subjects
between B feet and 14 feet from the camera.
Simply set the pointer to CLOUDY DULL,
fit a Flashcube and take your picture.
11
">