Shimano SL-M250 Shifting Lever Service Instructions

SERVICE INSTRUCTIONS
Before use, read these instructions carefully, and follow them for correct
use,
Shifting Lever
SL-M250
Brake Lever
BL-M250
EX/6E
Note
The following products should be used together for
the Shimano Index System (SIS) function.
eShifting Lever.............. SL-M250
e Rear Derailleur............ RD-M250
eFreehub, Freewheel.....FH-RM50/HB-RA50/
(6 speeds) CS-1000/MF-Z012
eChain........................ Shimano UG chain
eQuter Cable................Shimano SIS-SP cable
The following products should be used together for
the Shimano Linear Response (SLR).
®Вгаке Lever................ BL-M250
e Brake .................. ve... BR-M250
eQuter Cable................ Shimano outer cable
casing with liner
Installation of the shifting lever
Left side
Install the shifting lever unit so
that the shifting stroke is as
shown in the figure.
Installation of the brake lever and cable
Install to the handlebar, as shown in the figure.
E Turn the grip-width adjustment bolt to adjust to the
desired grip width.
| Grip-width
| adjustment bolt
SHIMANO AMERICAN CORPORATION SHIMANO (EURDPA) GmbH.
Adjustment bolt
CS ía mm
Innr end Outer insertion hole
Adjustment nut Spring
2) EI =
EST +— ©
ad) || ANT
7 y =
70%
+
rire hoor Y yO o |
AA ||
(1) Insert the cable (with adjustment nut, spring and
adjustment bolt all set in place) into the outer
insertion hole.
(2) Hook the inner end to the wire hook.
Note: Check to be sure that the adjustment nut is
oroperly set at the outer insertion hole.
Please note: Specifications are subjecl to change for improvement withoul notice. (English)
SHIMANO (SINGAPORE) PTE. LTD. SHIMANO INDUSTRIAL CO.LTD
со .
One Shimano Drive, Irvine, California U S.A, 92718 Tel. {714] 951-5003 im Mitsenteld 13 4010 Hilden, West Ge..nany Tel. 2103 50050 No. 20, Benoi Sector, Jurong Town, Singapore 2262 Tel. 2654777 3.77 Oimatsucho, Sakai, Ouaka, Japan Tel. (0722} 23 3243
© Jun. 1988 by Shimano Co., Lid. R-53 XBC SZK Prinled in Japan