Eval Kit Manual
DN[Document ID]
AS5270
Socket Board
AS5270-MF_EK_SB ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 1
Document Feedback
AS5270 Socket Board
1
2
3
4
5
3.1
3.2
6
Content Guide
Introduction .......................................................................................................................... 3
Board description ................................................................................................................. 4
AS5270-MF_EK_SB Hardware ............................................................................................ 5
AS5270-MF_EK_SB Schematics ......................................................................................... 5
AS5270-MF_EK_SB PCB layout ......................................................................................... 6
Ordering & Contact Information ........................................................................................... 7
Copyrights & Disclaimer ....................................................................................................... 8
Revision Information ............................................................................................................ 9
ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 2
Document Feedback
AS5270 Socket Board
1 Introduction
The AS5270-MF_EK_SB socket board is used for quick programming of the AS5270A and
AS5270B magnetic rotary position sensors without soldering due to its ZIF socket.
This board can be used in combination with the AS5xxx-EK-USB-PB UART Programming Board and the provided LabVIEW evaluation software.
Figure 1: Kit content
1
Pos. Item
1 AS5270-MF_EK_SB
Comment
Socket board ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 3
Document Feedback
AS5270 Socket Board
2 Board description
The PCB offers direct connecting option to the AS5xxx-EK-USB-PB UART Programmmer with the 4-pin single-row connector on the left side. A ZIF Open-Top-Socket for MLF-16 packages is mounted in the middle. Pin 1 of the IC is indicated by a small white dot on the PCB.
All passive components needed for proper operation are included on bottom side the PCB.
Figure 2: AS5270 socket board
ZIF socket for MLF-16
Connector to
AS5xxx-EK-
USB-PB UART
Programmer ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 4
Document Feedback
A
B
C
D
1
AS5270 Socket Board
1
3 AS5270-MF_EK_SB Hardware
3.1 AS5270-MF_EK_SB Schematics
2
Figure 3: AS5270-MF_EK_SB schematics
U1
AS5270
GND
GND
1
TP1_T
2
TP1_B
3
TP2_T
4
TP2_B
AS5270
VDD3V3_B
12 VDD3V3_B
VDD3V3_T
11 VDD3V3_T
TP4_B
10 OUT_B
TP4_T
9 OUT_T
3
C1
100nF
C2
100nF
C3
100nF
C4
100nF
GND
GND
VDD
OUT_T
GND
P1
1
3
5
7
2
4
6
8
Header 4X2
GND
GND
VDD
OUT_B
GND
4
2 3
Size
A4
Project Title
AS5270-MF_EK_AB
Date 17.06.2016
Originator mzie Sheet 1
4
Revision
1.0
of 1
D
A
B
C ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 5
Document Feedback
AS5270 Socket Board
3.2 AS5270-MF_EK_SB PCB layout
Figure 4: AS5270-MF_EK_SB PCB layout top side
Figure 5: AS5270-MF_EK_SB PCB layout bottom side ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 6
Document Feedback
AS5270 Socket Board
4 Ordering & Contact Information
Ordering Code Description
AS5270-MF_EK_SB AS5270 Eval Kit Socket Board
Buy our products or get free samples online at: www.ams.com/ICdirect
Technical Support is available at: www.ams.com/Technical-Support
Provide feedback about this document at: www.ams.com/Document-Feedback
For further information and requests, e-mail us at: [email protected]
For sales offices, distributors and representatives, please visit: www.ams.com/contact
Headquarters ams AG
Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe
Tel: +43 (0) 3136 500 0
Website: www.ams.com
ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 7
Document Feedback
AS5270 Socket Board
5 Copyrights & Disclaimer
Copyright ams AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks
Registered. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.
Demo Kits, Evaluation Kits and Reference Desig ns are provided to recipient on an “as is” basis for demonstration and evaluation purposes only and are not considered to be finished end-products intended and fit for general consumer use, commercial applications and applications with special requirements such as but not limited to medical equipment or automotive applications. Demo Kits,
Evaluation Kits and Reference Designs have not been tested for compliance with electromagnetic compatibility (EMC) standards and directives, unless otherwise specified.
Demo Kits, Evaluation Kits and Reference Designs shall be used by qualified personnel only. ams AG reserves the right to change functionality and price of Demo Kits, Evaluation Kits and
Reference Designs at any time and without notice.
Any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. Any claims and demands and any direct, indirect, incidental, special, exemplary or consequential damages arising from the inadequacy of the provided Demo Kits, Evaluation Kits and Reference Designs or incurred losses of any kind (e.g. loss of use, data or profits or business interruption however caused) as a consequence of their use are excluded. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services. ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 8
Document Feedback
AS5270 Socket Board
6 Revision Information
Changes from previous version to current revision 1-01 (2017-Jul-18)
Initial version 1-00
Review 1-01
Note: Page numbers for the previous version may differ from page numbers in the current revision.
Correction of typographical errors is not explicitly mentioned.
Page ams Eval Kit Manual
[v1-01] 2017-Jul-18
Page 9
Document Feedback
