advertisement
User Guide
UG000459
AS5116 Socket Board
Socket Board Manual
AS5116-SO_EK_SB v1-00 • 2019-Oct-24
Document Feedback AS5116 Socket Board
Content Guide
Content Guide
Introduction .................................... 3
Kit Content .................................................... 3
Ordering Information .................................... 4
Board Description.......................... 5
Hardware ........................................ 6
Schematics ................................................... 6
PCB Layout ...................................................7
Revision Information ..................... 8
Legal Information .......................... 9
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 2
Document Feedback AS5116 Socket Board
Introduction
1 Introduction
The AS5116-SO_EK_SB socket board is used for quick programming of the AS5116 magnetic rotary position sensors without soldering due to its ZIF socket. This board is used in combination with the
USB I&P Box or the SD4Y production programmer.
1.1 Kit Content
Figure 1:
Kit Content
Pos.
1
Item
AS5116-SO_EK_SB
Comment
Socket board
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 3
1.2 Ordering Information
Ordering Code
AS5116-SO_EK_SB
Document Feedback AS5116 Socket Board
Introduction
Description
Socket board assembled with ZIF socket
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 4
Document Feedback
2 Board Description
AS5116 Socket Board
Board Description
The PCB offers 2 connecting options: The 5-pin dual-row connector on the left side for connecting to the USB I&P Box and the 10-pin dual-row connector on the right side for connecting to the SD4Y
Production Programmer. Furthermore, 8-pin header on top gives access to analog signals and GND signals. A ZIF Open-Top-Socket for SOIC8 packages is mounted in the middle. Pin 1 of the IC is indicated by a small dot on the left bottom corner of the socket or by the label on the PCB. All passive components needed for proper operation are included on the PCB. Only a power supply mode of 5 V is possible.
Figure 2:
Socket Board
Connector for
UART Interface
ZIF socket6 for
SOIC 8
Connector for
SD4Y
Programmer
Connector for
USB I&P Box
Connector for analog signals
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 5
3 Hardware
3.1 Schematics
Figure 3:
Schematic
Document Feedback AS5116 Socket Board
Hardware
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 6
3.2 PCB Layout
Figure 4:
PCB Layout
Document Feedback AS5116 Socket Board
Hardware
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 7
Document Feedback
4 Revision Information
AS5116 Socket Board
Revision Information
Changes from previous version to current revision v1-00 Page
●
●
Initial version
Page and figure numbers for the previous version may differ from page and figure numbers in the current revision.
Correction of typographical errors is not explicitly mentioned.
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 8
Document Feedback
5 Legal Information
AS5116 Socket Board
Legal Information
Copyrights & Disclaimer
Copyright ams AG, Tobelbader Strasse 30, 8141 Premstaetten, Austria-Europe. Trademarks Registered. All rights reserved.
The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.
Demo Kits, Evaluat ion Kits and Reference Designs are provided to recipient on an “as is” basis for demonstration and evaluation purposes only and are not considered to be finished end-products intended and fit for general consumer use, commercial applications and applications with special requirements such as but not limited to medical equipment or automotive applications. Demo Kits, Evaluation Kits and Reference Designs have not been tested for compliance with electromagnetic compatibility (EMC) standards and directives, unless otherwise specified. Demo Kits, Evaluation Kits and Reference Designs shall be used by qualified personnel only. ams AG reserves the right to change functionality and price of Demo Kits, Evaluation Kits and Reference Designs at any time and without notice.
Any express or implied warranties, including, but not limited to the implied warranties of merchantability and fitness for a particular purpose are disclaimed. Any claims and demands and any direct, indirect, incidental, special, exemplary or consequential damages arising from the inadequacy of the provided Demo Kits, Evaluation Kits and Reference Designs or incurred losses of any kind (e.g. loss of use, data or profits or business interruption however caused) as a consequence of their use are excluded. ams AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of ams AG rendering of technical or other services.
RoHS Compliant & ams Green Statement
RoHS Compliant: The term RoHS compliant means that ams AG products fully comply with current RoHS directives. Our semiconductor products do not contain any chemicals for all 6 substance categories, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, RoHS compliant products are suitable for use in specified lead-free processes. ams Green (RoHS compliant and no Sb/Br): ams Green defines that in addition to RoHS compliance, our products are free of
Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material).
Important Information: The information provided in this statement represents ams AG knowledge and belief as of the date that it is provided. ams AG bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. ams AG has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. ams AG and ams AG suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
Headquarters ams AG
Tobelbader Strasse 30
8141 Premstaetten
Austria, Europe
Tel: +43 (0) 3136 500 0
Please visit our website at www.ams.com
Buy our products or get free samples online at www.ams.com/Products
Technical Support is available at www.ams.com/Technical-Support
Provide feedback about this document at www.ams.com/Document-Feedback
For sales offices, distributors and representatives go to www.ams.com/Contact
For further information and requests, e-mail us at [email protected]
Demo Kit Manual • PUBLIC
UG000459
• v1-00 • 2019-Oct-24
9
│ 9
advertisement
Related manuals
advertisement