advertisement
YDP-S31
Owner's Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
For information on assembling the keyboard stand, refer to the instructions at the end of this manual.
Weitere Informationen über die Montage des Keyboard-Ständers erhalten Sie in den Anweisungen am Ende dieses Handbuchs.
Pour obtenir des informations sur l'assemblage du support du clavier, reportez-vous aux instructions à la fin de ce manuel.
Para información sobre el montaje del soporte del teclado, consulte las instrucciones al final de este manual.
EN
DE
FR
ES
Introduction
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter). DO
NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha.
WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! If you must use an extension cord, the minimum wire size for a 25’ cord (or less) is 18
AWG. NOTE: The smaller the AWG number, the larger the current handling capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied or; a cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please observe all safety markings and instructions that accompany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at the time of printing. However, Yamaha reserves the right to change or modify any of the specifications without notice or obligation to update existing units.
This product, either alone or in combination with an amplifier and headphones or speaker/s, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate for long periods of time at a high volume level or at a level that is uncomfortable. If you experience any hearing loss or ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before damage occurs.
Some Yamaha products may have benches and / or accessory mounting fixtures that are either supplied with the product or as optional accessories. Some of these items are designed to be dealer assembled or installed. Please make sure that benches are stable and any optional fixtures (where applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No other uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer’s warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these may be rechargeable. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged.
When installing batteries, do not mix batteries with new, or with batteries of a different type. Batteries MUST be installed correctly. Mismatches or incorrect installation may result in overheating and battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all batteries away from children. Dispose of used batteries promptly and as regulated by the laws in your area. Note: Check with any retailer of household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some reason its useful life is considered to be at an end, please observe all local, state, and federal regulations that relate to the disposal of products that contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model number, serial number, power requirements, etc., are located on this plate.
You should record the model number, serial number, and the date of purchase in the spaces provided below and retain this manual as a permanent record of your purchase.
92-BP (bottom)
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Power supply/AC power adaptor
• Only use the voltage specified as correct for the instrument. The required voltage is printed on the name plate of the instrument.
• Use the specified adaptor ((PA-5D, PA-150 or an equivalent recommended by
Yamaha) only. Using the wrong adaptor can result in damage to the instrument or overheating.
• Check the electric plug periodically and remove any dirt or dust which may have accumulated on it.
• Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do not excessively bend or otherwise damage the cord, place heavy objects on it, or place it in a position where anyone could walk on, trip over, or roll anything over it.
Do not open
• Do not open the instrument or attempt to disassemble the internal parts or modify them in any way. The instrument contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha service personnel.
Water warning
• Do not expose the instrument to rain, use it near water or in damp or wet conditions, or place containers on it containing liquids which might spill into any openings. If any liquid such as water seeps into the instrument, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel.
• Never insert or remove an electric plug with wet hands.
Fire warning
• Do not put burning items, such as candles, on the unit.
A burning item may fall over and cause a fire.
If you notice any abnormality
• If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss of sound during use of the instrument, or if any unusual smells or smoke should appear to be caused by it, immediately turn off the power switch, disconnect the adaptor plug from the outlet, and have the instrument inspected by qualified Yamaha service personnel.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property. These precautions include, but are not limited to, the following:
Power supply/AC power adaptor
• When removing the electric plug from the instrument or an outlet, always hold the plug itself and not the cord.
• Unplug the AC power adaptor when not using the instrument, or during electrical storms.
• Do not connect the instrument to an electrical outlet using a multiple-connector.
Doing so can result in lower sound quality, or possibly cause overheating in the outlet.
Location
• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disfiguration or damage to the internal components.
• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio may generate noise.
• Do not place the instrument in an unstable position where it might accidentally fall over.
• Before moving the instrument, remove all connected adaptor and other cables.
• When setting up the product, make sure that the AC outlet you are using is easily accessible. If some trouble or malfunction occurs, immediately turn off the power switch and disconnect the plug from the outlet. Even when the power switch is turned off, electricity is still flowing to the product at the minimum level. When you are not using the product for a long time, make sure to unplug the power cord from the wall AC outlet.
• Use only the stand specified for the instrument. When attaching the stand or rack, use the provided screws only. Failure to do so could cause damage to the internal components or result in the instrument falling over.
(3)-12
1/2
YDP-S31 Owner’s Manual 3
Connections
• Before connecting the instrument to other electronic components, turn off the power for all components. Before turning the power on or off for all components, set all volume levels to minimum. Also, be sure to set the volumes of all components at their minimum levels and gradually raise the volume controls while playing the instrument to set the desired listening level.
Maintenance
• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.
Handling caution
• Take care that the key cover does not pinch your fingers, and do not insert a finger or hand in any gaps on the key cover or instrument.
• Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel.
• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.
• Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors.
• Do not use the instrument/device or headphones for a long period of time at a high or uncomfortable volume level, since this can cause permanent hearing loss. If you experience any hearing loss or ringing in the ears, consult a physician.
Saving data
Saving and backing up your data
• Data in the instrument’s internal memory can be lost due to operational errors or malfunction. Be sure to save any important data to external media via a
computer connected to the instrument. (page 31)
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Even when the power switch is in the “STANDBY” position, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make sure you unplug the AC power adaptor from the wall AC outlet.
4 YDP-S31 Owner’s Manual
(3)-12
2/2
Welcome
Thank you for purchasing the Yamaha Digital Piano! We recommend that you read this manual carefully so that you can take full advantage of the advanced and convenient functions of your new digital piano.
We also recommend that you keep this manual in a safe, convenient place for future reference.
About the Documentation and Reference Materials for this Instrument
The documentation and reference materials for this instrument consist of the following:
Owner’s Manual (this book)
Please read this section first.
This section explains how to make detailed settings for the instrument’s various functions.
This section introduces specifications and other information.
Quick Operation Guide (separate sheet)
This Guide explains detailed operation of the functions assigned to the buttons and keyboard.
Data List
You can download various MIDI-related reference materials, such as the MIDI Data Format and MIDI Implementation Chart, from the Yamaha Manual Library .
Connect to the Internet, visit the following website, type the model name of your instrument (such as “YDP-S31”) in the Model Name text box, then click the Search button.
Yamaha Manual Library http://www.yamaha.co.jp/manual/
* The illustrations as shown in this owner’s manual are for instructional purposes only, and may be different from the ones on your instrument.
COPYRIGHT NOTICE
This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use others’ copyrights. Such copyrighted materials include, without limitation, all computer software, MIDI files and WAVE data. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of copyright has legal consequences. DON’T MAKE,
DISTRIBUTE OR USE ILLEGAL COPIES.
Copying of the commercially available software is strictly prohibited except for your personal use.
Trademarks:
• Windows is a registered trademark of Microsoft® Corporation.
• All other trademarks are the property of their respective holders.
YDP-S31 Owner’s Manual 5
Table of Contents
Introduction
SPECIAL MESSAGE SECTION ...................... 2
Welcome ...............................................................5
About the Documentation and Reference
Materials for this Instrument ................... 5
Table of Contents ....................................... 6
Application Index........................................ 7
Accessories .................................................. 8
Maintenance ............................................... 8
Features....................................................... 9
Before Using the Digital Piano ................. 10
Turning the Power On.......................................10
Key cover and music rest ...................................11
Setting the Volume.............................................12
Using Headphones .............................................12
Part Names................................................ 14
Listening to the Demo Songs ................... 15
Listening to 50 Piano Preset Songs .......... 16
Listening to Songs Loaded from the
Computer ............................................... 17
Selecting & Playing Voices........................ 18
Selecting Voices ..................................................18
Using the Pedals .................................................19
Adding Variations to the Sound – Reverb ........20
Layering Two Voices (Dual mode) ...................21
Transposition .....................................................22
Fine-tuning the Pitch .........................................22
Using the Metronome........................................23
(Touch Sensitivity) ........................................24
Recording your Performance.................... 25
Playing Back Recorded Performance Data .......26
Song Clear...........................................................26
Connecting MIDI Instruments .................. 27
About MIDI........................................................27
MIDI’s Capability...............................................27
Connecting the Digital Piano to a
Computer ............................................... 28
MIDI Functions.......................................... 29
MIDI Transmit/Receive Channel Selection......29
Local Control ON/OFF......................................29
Program Change ON/OFF.................................30
Control Change ON/OFF ..................................30
Transmitting Song Data between the
Computer and the Digital Piano ............ 31
Loading Song Data from a Computer to the
Digital Piano .................................................. 31
Transmitting Song Data from the Digital
Piano to a Computer..................................... 31
Backing up Data and Initializing the Settings.... 32
Troubleshooting........................................ 33
Options ...................................................... 33
Keyboard Stand Assembly ........................ 34
Index.......................................................... 37
Appendix
Specifications ............................................ 39
6 YDP-S31 Owner’s Manual
Application Index
Use this index to find reference pages that may be helpful for your particular application and situation.
Listening
Playing
Fine-tuning the pitch of the entire instrument when you play this instrument
Adjusting the key touch response (sensitivity) for changing the volume
Changing voices
Practicing
Recording
Connecting this instrument to other devices
Transmitting the recording of your performance to a computer
Transmitting song data from a computer to the instrument
Assembling
YDP-S31 Owner’s Manual 7
Accessories
• “50 Greats for the Piano” (Music Book)
• Owner’s Manual
This manual contains complete instructions for operating your digital piano.
• Quick Operation Guide
• AC Power Adaptor (Yamaha PA-5D, PA-150 or an equivalent)*
* May not be included depending on your particular area. Check with your Yamaha dealer for details.
Maintenance
Clean the instrument using a dry or slightly damp soft cloth (wring well).
CAUTION
Do not use benzene, thinner, detergent, or chemically-treated cloth for cleaning. Do not place vinyl, plastic or rubber products on the instrument.
Otherwise, the panel or keys may become discolored or degraded.
CAUTION
Before using this instrument, be sure to read “Precautions” on pages 3 – 4.
Tuning
Unlike an acoustic piano, this instrument does not need to be tuned. It always stays perfectly in tune.
Transporting
If you move to another location, you can transport this instrument along with your other belongings. You can move the unit as it is (assembled) or you can disassemble the unit before moving.
Transport the keyboard horizontally. Do not lean it up against a wall or stand it up on its side. Do not subject the instrument to excessive vibration or shock.
8 YDP-S31 Owner’s Manual
Features
This Yamaha digital piano features a special “GHS (Graded Hammer Standard) keyboard with matte black keytops.”
The GHS keyboard offers natural grand-piano type playability by simulating the heavier touch of the low range and the lighter touch of the high range across the keyboard.
The matte black keytops enhance the piano’s luxurious and graceful appearance.
Two of the piano voices, “Grand Piano 1” and “Grand Piano 2,” feature totally samples recorded from a full-size concert grand piano. The “Electric Piano” voice features multiple samples for different velocities (Dynamic Sampling); that is, different samples are used depending on how fast or strong you strike the keys.
This digital piano sounds much closer to a true acoustic piano.
[DEMO/SONG]
Listen to the playback of a demo song for each voice and 50 piano preset
[PIANO/VOICE]
Select one of 6 internal sounds, includ-
ing Grand Piano 1 and 2 (page 18).
You can also layer two voices together
(page 21) or select various reverb
........
[REC]
[PLAY]
Play back your recorded performance
[MASTER VOLUME]
Adjust the volume level using this control
........
Control the metronome functions (page 23).
........
Select a demo song for each voice, or one
of the 50 piano preset songs (page 15 and
16). You can also select a different voice
while the song playback is stopped.
[DC IN 12V]
Connect the included power
DC IN 12V
TO PEDAL
Front
MIDI [IN/OUT] ........
use various MIDI functions (pages 27–
28). (Connecting MIDI Instruments—
........
A set of standard stereo headphones can be plugged in here for private prac-
[TO PEDAL]
Connect the pedal cord
Shows the [DC IN 12V] and [TO
PEDAL] jacks as seen when viewed from the rear of the instrument.
YDP-S31 Owner’s Manual 9
Before Using the Digital Piano
Turning the Power On
1. Connect the power adaptor.
1-1 Make sure that the [STANDBY/ON] button is set to STANDBY.
1-2 Insert the DC plug on the power adaptor into the [DC IN 12V] jack.
1-3 Insert the AC plug on the power adaptor into a wall AC outlet.
[DC IN 12V] jack
1-2 adaptor
1-3
AC outlet
WARNING
Use the specified adaptor (PA-5D, PA-150, or an equivalent recommended by yamaha) only. The use of other adaptors may result in irreparable damage to both the adaptor and the instrument.
WARNING
Unplug the AC Power Adaptor when not using the instrument, or during electrical storms.
2. Turn the power on.
Press the [STANDBY/ON] button.
• The power indicator located below the left end of the keyboard lights up.
[STANDBY/ON]
Power indicator
To turn the power off, press the [STANDBY/ON] button again.
• The power indicator turns off.
CAUTION
Even when the switch is in the “STANDBY” position, electricity is still flowing to the instrument at a minimum level. When not using the instrument for an extended period of time, be sure to unplug the AC power adaptor from the wall AC outlet.
10 YDP-S31 Owner’s Manual
Key cover and music rest
Opening the key cover
1. Hold the ledge of the key cover top with both hands, then open the key cover slowly.
2. Fold the front panel strip.
3. Unfold the music rest.
Closing the key cover
1. Fold the music rest.
2. Unfold the front panel strip.
3. Hold the key cover with both hands and close it slowly.
CAUTION
Before closing the key cover, be sure to fold the music rest and unfold the front panel strip.
YDP-S31 Owner’s Manual 11
Setting the Volume
When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.
The level decreases.
The level increases.
CAUTION
Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.
Using Headphones
Connect a pair of headphones to one of the [PHONES] jacks.
Two [PHONES] jacks are provided.
You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.) bottom surface standard stereo phone plug
12 YDP-S31 Owner’s Manual
Reference
Part Names................................................................ 14
Listening to the Demo Songs................................... 15
Listening to 50 Piano Preset Songs.......................... 16
Listening to Songs Loaded from the Computer ..... 17
Selecting & Playing Voices ....................................... 18
Selecting Voices ........................................................... 18
Using the Pedals .......................................................... 19
Adding Variations to the Sound – Reverb.................. 20
Layering Two Voices (Dual mode) ............................. 21
Transposition............................................................... 22
Fine-tuning the Pitch .................................................. 22
Using the Metronome ................................................. 23
Adjusting the Keyboard Touch (Touch Sensitivity) .. 24
Recording your Performance................................... 25
Playing Back Recorded Performance Data ................ 26
Song Clear ................................................................... 26
Connecting MIDI Instruments ............................... 27
About MIDI................................................................. 27
MIDI’s Capability........................................................ 27
Connecting the Digital Piano to a Computer ................ 28
MIDI Functions........................................................ 29
MIDI Transmit/Receive Channel Selection ............... 29
Local Control ON/OFF............................................... 29
Program Change ON/OFF ......................................... 30
Control Change ON/OFF ........................................... 30
Loading Song Data from a Computer to the Digital
Piano ........................................................................ 31
Transmitting Song Data from the Digital Piano to a
Computer................................................................. 31
Backing up Data and Initializing the Settings ........... 32
Troubleshooting ....................................................... 33
This section explains how to make detailed settings for this instrument’s various functions.
Keyboard Stand Assembly ....................................... 34
Index ......................................................................... 37
YDP-S31 Owner’s Manual 13
Part Names
4
7
6
2
3
5
8
#
$
%
1
9
TO PEDAL
!
DC IN 12V
@
)
1
[STANDBY/ON] ............................. P10
2
[MASTER VOLUME] ....................... P12
3
[METRONOME]............................. P23
4
[DEMO/SONG] ............................. P15
5
[PIANO/VOICE] ........................P18–21
6
[SELECT –/+] ..................... P15, 16, 18
7
[REC]............................................. P25
8
[PLAY] ..................................... P25, 26
9
MIDI [IN]/[OUT] ........................... P27
0
[PHONES] ..................................... P12
A
[TO PEDAL]................................... P34
B
[DC IN 12V].................................. P10
C
Soft (Left) Pedal ............................ P19
D
Sostenuto (Center) Pedal .............. P19
E
Damper (Right) Pedal ................... P19
14 YDP-S31 Owner’s Manual
Listening to the Demo Songs
Demo songs are provided that effectively demonstrate each of this instrument’s voices.
Procedure
1.
Turn on the power.
(In case the power is not turned ON) Press the [STANDBY/ON] button.
When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.
2.
Start playing back a demo song.
Press the [DEMO/SONG] button.
The demo song for the currently-selected voice starts playing.
3.
Select and play a demo song.
While a demo song is playing, press the [SELECT –/+] button to select and play the next demo song.
If you wish to select a particular demo song from 6 voice demo songs, while holding down the [DEMO/SONG] button, press one of the C1–F1 keys.
The selected demo song starts to play. Starting with the selected song, the playback of the demo songs will continue in the following sequence: other voice demo songs, followed by 50 piano preset songs, and any songs loaded from the computer. The sequence then returns to the first demo song and repeats until you stop it.
Refer to the voice list on
page 18 for more information on
the characteristics of each preset voice.
The demo songs will not be transmitted via MIDI.
The lowest key C1 F1
Demo Songs
Each of the 6 voices features its own demo song that showcases the correspond-
ing voice. Please refer to “Selecting Voices” on page 18.
The demo songs listed below are re-arranged excerpts from the original compositions.
The other demo songs are Yamaha’s original pieces (©2005 Yamaha Corporation).
Key
C1
D 1
Voice Name
GrandPiano1
Harpsichord
Title
“Eintritt” Waldszenen Op.82
Gavotte
Composer
R. Schumann
J.S. Bach
Adjusting the Volume
Use the [MASTER VOLUME] control to adjust the volume.
4.
Stop the Voice demo.
Press the [DEMO/SONG] button to stop playback.
YDP-S31 Owner’s Manual 15
Listening to 50 Piano Preset Songs
This digital piano provides performance data for 50 piano songs as well as voice demo songs. You can simply listen to these songs. You can also refer to the included “50 Greats for the Piano” that contains scores for 50 piano preset songs.
Procedure
1.
Select and play back a piano preset song.
The number of each piano preset song is assigned to the C2-C 6 keys.
While holding down the [DEMO/SONG] button, press one of the C2-C 6 keys to select a song to play back.
The selected piano song starts to play.
To play all preset songs consecutively in sequence, while holding down the
[DEMO/SONG] button, press the D6 key.
1st song 10th song 20th song 30th song 40th song 50th song (C 6)
C2 C3 C4 C5 Consecutive playback (D6)
The highest key
Press the [SELECT –/+] button to change to the next piano song.
Adjusting the Volume
Use the [MASTER VOLUME] control to adjust the volume.
2.
Stop playback.
To stop the song during playback, press the [DEMO/SONG] button.
• To continue playing other songs, see procedure 1 above.
Song:
On this instrument, performance data is called a “Song.”
This includes demo songs and
50 piano preset tunes.
You can play the keyboard along with the preset song. You can change the voice playing on the keyboard.
The default tempo is automatically selected whenever a new preset song is selected, and when a new preset song begins playback in the continuous playback.
To adjust the tempo of the preset
When you select a different song
(or a different song is selected during chained playback), an appropriate reverb type will be selected accordingly.
The 50 piano preset songs will not be transmitted via MIDI.
16 YDP-S31 Owner’s Manual
Listening to Songs Loaded from the
Computer
You can transfer song data from your computer to this instrument and play back the songs. (See
page 31 for more information on loading song data from the computer.)
Procedure
1.
Select and play back a song.
Song numbers (1 through 10) are assigned to the D 6-C7 keys (see the illustration below).
While holding down the [DEMO/SONG] button, press one of the D 6-C7 keys to select a song to play back.
The selected song starts to play.
1st song 10th song
D 6 C7
Adjusting the Volume
Use the [MASTER VOLUME] control to adjust the volume while listening to the song.
2.
Stop playback.
To stop the song during playback, press the [DEMO/SONG] button.
Selecting a Song Playback Channel
If a song loaded from the computer uses a voice that is not supported by this instrument, the originally-assigned voice may not be reproduced accurately. In this case, switching the song playback channel from “All” to “1 + 2” may improve the tone to more natural sound.
Selecting all song playback channels:
While pressing and holding down the [DEMO/SONG] button and the [PIANO/
VOICE] button simultaneously, press the B6 key.
All channels 1 through 16 will produce the sound.
B6
G 6
A6
A 6
B6
C7
Key
D 6
E6
F6
F 6
G6
You can load up to 10 songs or up to 352 KB of data from the computer.
Use the following table to write down the song titles you loaded from the computer.
Song title
The top key
Selecting 1 + 2 song playback channels:
While pressing and holding down the [DEMO/SONG] button and the [PIANO/
VOICE] button simultaneously, press the C7 key.
Channels 1 + 2 will produce the sound.
C7
The top key
YDP-S31 Owner’s Manual 17
Selecting & Playing Voices
Selecting Voices
Procedure
Press and release the [PIANO/VOICE] button to select the Grand Piano 1 voice.
While holding down the [PIANO/VOICE] button, press one of the C1-F1 keys to select a voice. Alternatively, you can also select a voice by pressing [PIANO/VOICE] button, then press the [SELECT –/+] button repeatedly to select a different voice.
Turn the [MASTER VOLUME] control to adjust the volume level while playing the keyboard.
C 1 D 1
The lowest key
C1 D1 E1 F1
To understand the characteristics of various voices, listen to demo songs for each voice
Voice:
On this instrument, a voice means a “tone” or “tonal color.”
Selecting a voice automatically engages the best-suited reverb
that particular voice.
Key
C1
C 1 Grand Piano 2
D1 E.Piano
D 1
E1
F1
Voice Name
Grand Piano 1
Harpsichord
Church Organ
Strings
Description
Recorded samples from a full concert grand piano. Perfect for classical compositions as well as any other style that requires acoustic piano.
Spacious and clear piano with bright reverb. Good for popular music.
An electronic piano sound created by FM synthesis. Good for popular music.
The definitive instrument for baroque music. Since the strings of a harpsichord are plucked, there is no touch response.
This is a typical pipe organ sound (8 feet + 4 feet + 2 feet). Good for sacred music from the Baroque period.
Spacious and large-scale string ensemble. Try combining this voice with piano in DUAL mode.
18 YDP-S31 Owner’s Manual
Using the Pedals
Damper (Right) Pedal
The damper pedal functions as a selective damper pedal by sustaining certain notes. Hold down a note, press the damper pedal, then release the key.
The note will continue to sound until you release the damper pedal.
The damper pedal features a half-pedal function.
When you press the damper pedal here, the notes you play before you release the pedal sustain longer.
Sostenuto (Center) Pedal
If you play a note or chord on the keyboard and press the sostenuto pedal while the note(s) are held, those notes will sustain as long as you hold the pedal (as if the damper pedal had been pressed) but all subsequently played notes will not be sustained. This makes it possible to sustain a chord, for example, while other notes are played “staccato.”
When you press the sostenuto pedal here while holding the note, the note will sustain as long as you hold the pedal.
Soft (Left) Pedal
The soft pedal reduces the volume and slightly changes the timbre of notes played while the pedal is pressed. The soft pedal will not affect notes that are already playing when it is pressed.
If the damper pedal doesn’t work, make sure that the pedal cord is properly plugged into the
While playing the piano with
Sustain and you want to slightly mute the sustained sound, release the foot pedal from maximum position to half position.
Organ and string voices will continue to sound for as long as the sostenuto pedal is depressed.
YDP-S31 Owner’s Manual 19
Adding Variations to the Sound – Reverb
This control enables you to select various digital reverb effects that add extra depth and expression to the sound to create a realistic acoustic ambience.
Procedure
While holding down the [PIANO/VOICE] button, press one of the C2–E2 keys to select a reverb type.
C 2 D 2
The lowest key C2 D2 E2
Key
C2
Reverb Type
Room
C 2 Hall1
D2 Hall2
Description
This setting adds a continuous reverb effect to the sound, similar to the acoustic reverberation you would hear in a room.
For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates the natural reverberation of a small-size concert hall.
For a truly spacious reverb sound, use the HALL 2 setting. This effect simulates the natural reverberation of a large concert hall.
Simulates the reverb of a stage environment.
No effect is applied.
D 2 Stage
E2 Off
Adjusting Reverb Depth
Adjust the reverb depth for the selected voice by pressing one of the C3–G 4 keys while holding down the [PIANO/VOICE] button. The depth range is from 0 through 20.
G 4: depth 20
The default reverb type (including OFF) and depth settings are different for each voice.
depth 0: no effect depth 20: maximum reverb depth
The lowest key C3: depth 0 A4
The depth value increases as you press higher keys.
While holding down the [PIANO/VOICE] button, press the A4 key to set the reverb to the depth most suitable for the selected voice.
20 YDP-S31 Owner’s Manual
Layering Two Voices (Dual mode)
You can layer two voices and play them simultaneously to create a thicker and more supple sound.
Procedure
1.
Engage Dual mode.
While holding down the [PIANO/VOICE] button, press two keys in the range of C1 through F1 simultaneously to select the two desired voices. Alternatively, while holding down the [PIANO/VOICE] button, press and hold down one key, then press another.
Refer to “Selecting & Playing Voices” on page 18 for information on the voices
that are assigned to the keys.
You cannot assign the same voice to Voice 1 and Voice 2 simultaneously in Dual mode.
Reverb in Dual Mode
The reverb type assigned to
Voice 1 will take priority. (If the reverb assigned to Voice 1 is set to OFF, the reverb assigned to
Voice 2 will be in effect.) The
reverb depth setting (page 20)
will be applied only to Voice 1.
The lowest key C1 F1
The voice assigned to the lower key will be designated as Voice 1, and the voice assigned to the higher key will be designated as Voice 2.
You can make the following settings for Voices 1 and 2 in Dual mode:
Setting the Octave
You can shift the pitch up and down in octave steps for Voice 1 and Voice 2 independently. Depending on which voices you combine in Dual mode, the combination may sound better if one of the voices is shifted up or down an octave.
While holding down the [PIANO/VOICE] button, press one of the C5–F5 keys.
C5 F5
C5 key: –1 (Voice 1), C 5 key: 0 (Voice 1), D5 key: +1(Voice 1),
D 5 key: –1 (Voice 2), E5 key: 0 (Voice 2), F5 key: +1(Voice 2)
The highest key
Setting the Balance
You can adjust the volume balance between two voices. For example, you can set one voice as the main voice with a louder setting, and make the other voice softer.
While holding down the [PIANO/VOICE] button, press one of the F 5–F 6 keys.
A setting of “0” produces an equal balance between the two Dual mode voices.
Settings below “0” increases the volume of Voice 2 in relation to Voice 1, and settings above “0” increases the volume of Voice 1 in relation to Voice 2.
F 5 C6 F 6
-6 -4 -2 +1 +3 +6
-5 -3 -1 0 +2 +4 +5
The highest key
2.
Exit Dual mode and return to normal play mode.
While holding down the [PIANO/VOICE] button, press one of the C1–F1 keys.
YDP-S31 Owner’s Manual 21
Transposition
Your digital piano’s Transpose function makes it possible to shift the pitch of the entire keyboard up or down in semitone intervals up to a maximum of six semitones, and lets you easily match the pitch of the keyboard to the range of a singer or other instruments.
For example, if you set the transposition amount to “5,” playing key C produces pitch F. In this way, you can play a song as though it were in C major, and this instrument will transpose it to the key of F.
Procedure
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons, press one of the F 2–F 3 keys to set the desired amount of transposition.
F 2 C3 F 3
-6 -4 -2 +1 +3 +6
-5 -3 -1 0 +2 +4 +5
[DEMO/SONG] + [PIANO/VOICE] + C3 key:
Plays normal keyboard pitch.
Transpose down.
Transpose
Normal up.
pitch.
[DEMO/SONG] + [PIANO/VOICE] + B2 key (white key to the left of C3):
Transposes the pitch down by one semitone.
[DEMO/SONG] + [PIANO/VOICE] + B 2 key (the first black key to the left of C3):
Transposes the pitch down a whole tone (two semitones).
[DEMO/SONG] + [PIANO/VOICE] + F 2 key:
Transposes the pitch down by six semitones.
[DEMO/SONG] + [PIANO/VOICE] + C 3 key (black key to the right of C3):
Transposes the pitch up by one semitone.
[DEMO/SONG] + [PIANO/VOICE] + D3 key (the first white key to the right of C3):
Transposes the pitch up a whole tone (two semitones).
[DEMO/SONG] + [PIANO/VOICE] + F 3 key:
Transposes the pitch up by six semitones.
Transpose:
Changing the key signature. On this instrument, transposing shifts the pitch of the entire keyboard.
Fine-tuning the Pitch
You can fine-tune the pitch of the entire instrument. This function is useful when you play the digital piano along with other instruments or CD music.
Procedure
Raising the pitch (0.2Hz steps)
Hold down the A-1, B-1 and C0 keys, and press any key in the range from C3 to B3.
Lowering the pitch (0.2Hz steps)
Hold down the A-1, B-1 and C#0 keys, and press any key in the range from C3 to B3.
Resetting to the default pitch
Hold down the A-1, B-1, C0 and C#0 keys, and press any key in the range from C3 to B3.
To tune up
B-1
A-1 C0
To tune down
A-1
B-1
C 0
To restore default pitch
B-1
A-1
C0
C 0 C3 B3
Hz (Hertz):
This unit of measurement refers to the frequency of a sound and represents the number of times a sound wave vibrates in a second.
Setting range: 427.0-453.0 Hz
Default pitch: 440.0 Hz
22 YDP-S31 Owner’s Manual
Using the Metronome
Your digital piano features a built-in metronome (a device that keeps an accurate tempo) that is convenient for practicing.
Procedure
1.
Start the metronome.
Press the [METRONOME] button to turn on the metronome.
Determines the Time Signature
While holding down the [METRONOME] button, press one of the C3–F3 keys.
C 3 D 3
The highest key
C3 D3 E3 F3
C3 key: No downbeat, C 3 key: 2/4, D3 key: 3/4, D 3 key: 4/4, E3 key: 5/4, F3 key: 6/4
Adjusting the Tempo
The tempo of the metronome and preset song playback can be set from 32 to
280 beats per minute.
A number is assigned to each of the following keys.
While holding down the [METRONOME] button, press a sequence of C4–A4 keys to specify a three-digit number.
Select a number starting from the left-most digit. For example, to set the tempo
“95,” press the C4 (0), A4 (9) and F4 (5) keys in sequence.
Increasing the tempo value in steps of one:
While holding down the [METRONOME] button, press the C 5 key.
Decreasing the tempo value in steps of one:
While holding down the [METRONOME] button, press the B4 key.
Increasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the D5 key.
Decreasing the tempo value in steps of ten:
While holding down the [METRONOME] button, press the A 4 key.
A 4 C 5
1 3 6 8
0 2 4 5 7 9
The highest key
C4 A4 B4 C5 D5
Resetting the tempo to default:
While holding down the [METRONOME] button, press the C5 key.
YDP-S31 Owner’s Manual 23
Adjusting the Volume
You can change the volume of the metronome sound.
While holding down the [METRONOME] button, press one of the C1–G2 keys to determine the volume.
G2 The lowest key C1
The volume level increases as you press higher keys.
2.
Stop the metronome.
Turn off the metronome by pressing the [METRONOME] button.
Adjusting the Keyboard Touch
(Touch Sensitivity)
You can adjust the volume level that changes depending on how fast or strong you hit the keys. The following four settings are available.
A6 ..............................The volume level does not change at all regardless of whether you play the keyboard soft or hard.
A 6 .............................The volume level does not change much when you play the keyboard soft or hard.
B6 ..............................This is the standard piano touch response. (This is the default setting.)
C7 ..............................The volume level changes very widely from pianissimo to fortissimo to facilitate dynamic and dramatic expression. You have to hit the keys hard to produce a loud sound.
Procedure
While holding down the [PIANO/VOICE] button, press one of the A6-C7 keys to select the desired touch sensitivity.
This setting is disabled with some voices, such as an organ sound.
A6 C7
24 YDP-S31 Owner’s Manual
Recording your Performance
Your digital piano’s recording function enables you to record your performance of one song.
The recorded performance is called the “user song.”
Follow the steps below to record and play back your performance.
Audio recording and data recording
Cassette tape recordings use a different data format than this instrument.
Cassette tapes record audio signals. On the other hand, this instrument records information about the notes and voices being played and about the timing and tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instrument, its internal tone generator reproduces the sound according to the recorded information.
CAUTION
Be careful not to erase the recorded data:
After you record a performance on this instrument, the [PLAY] button indicator lights up. When this indicator remains on, recording another performance will erase the recorded data.
Procedure
1.
Select a voice and other settings for the recording.
While holding down the [PIANO/VOICE] button, press one of the C1–F1 keys to
select the desired voice(s). (See page 18.)
If you desire, you can select other settings, such as the reverb setting.
Use the [MASTER VOLUME] control to adjust the volume to a comfortable listening level. You can also use the [MASTER VOLUME] control to adjust the volume level during playback.
2.
Engage Record mode.
Press the [REC] button.
The [REC] button indicator lights up.
Press the [REC] button again if you wish to cancel Record mode.
3.
Start recording.
Recording starts as soon as you play the keyboard.
Alternatively, press the [PLAY] button to start recording.
4.
Stop recording.
Press the [REC] button.
You cannot engage Record mode while a demo song is playing.
Recording capacity
“Recording capacity” is the maximum amount of performance data that you can record. This instrument’s recording capacity is 65 KB
(approximately 11,000 notes).
Changing the settings for the recorded user song
To change the settings for the recorded user song, engage
Record mode, change the settings as you desire, then stop recording without playing the keyboard.
For example, if you wish to change the voice of the user song, press the [REC] button to engage Record mode (see Step
2), then select a different voice
(see Step 1). Without playing the keyboard, press the [REC] button to stop recording (see Step 4).
CAUTION
Do not turn off the power to this instrument while it is recording the data in its internal memory (that is, while the
[REC] and [PLAY] button indicators are flashing). Otherwise, all recorded data, including the data being recorded, will be lost.
You can save the recorded user song to a computer. You can also load the user song data from a computer and play it back on this
YDP-S31 Owner’s Manual 25
Playing Back Recorded Performance
Data
Procedure
1.
Start the playback.
Press the [PLAY] button.
2.
Stop the playback.
When the user song finishes playing back, this instrument automatically returns to the previous mode.
To stop the playback, press the [PLAY] button.
Song Clear
The Song clear operation completely erases the recorded song.
Procedure
1.
Engage Record mode.
Press the [REC] button.
The record button indicator lights up.
Press the [REC] button again if you wish to cancel the clear operation.
2.
Start Clear
Press the [PLAY] button and then press the [REC] button.
26 YDP-S31 Owner’s Manual
Connecting MIDI Instruments
Your digital piano features MIDI jacks. Using the MIDI functions enables you to access a variety of musical genres.
About MIDI
MIDI (Musical Instrument Digital Interface) is a global format standard for performance data transmission and reception between electronic musical instruments.
Connecting musical instruments that support MIDI via MIDI cables enables you to transfer performance and setting data between multiple musical instruments. Using MIDI, you can also achieve more advanced performances than using just a single musical instrument.
IN
MIDI
OUT
Since MIDI data that can be transmitted or received varies depending on the type of MIDI devices. Please check the “MIDI
Implementation Chart” on the
web (please refer to “Data List” on page 5) to find out what
MIDI data and commands your devices can transmit or receive.
You need a dedicated MIDI cable (optional) to make a MIDI connection. You can purchase
MIDI cables at musical instrument stores.
If you connect a very long MIDI cable, data transmission errors may result. Use a MIDI cable of
15 meters or less.
Before connecting a MIDI device to this instrument, first turn off the power to both this instrument and the MIDI device.
After connecting them, turn on the power to the MIDI device first, then turn on the power to this instrument.
MIDI’s Capability
MIDI functions enable you to transfer performance data between MIDI devices, load song data from a connected computer to your instrument, and transmit and save user song data to a computer.
●
Transferring performance data to and from another
MIDI device
MIDI OUT jack
MIDI IN jack
MIDI IN jack
Optional
MIDI cables
MIDI OUT jack MIDI instrument
●
Transferring MIDI data to and from a computer
USB port
OUT MIDI IN jack
Computer
Optional
USB-MIDI interface
(e.g., Yamaha UX16)
IN
MIDI OUT jack
You cannot transmit the voice demo songs and the 50 piano preset songs from this instrument to another MIDI device.
For more information on the transmission and reception of
song data, refer to “Transmitting
Song Data between the Computer and the Digital Piano” on page 31.
YDP-S31 Owner’s Manual 27
Connecting the Digital Piano to a
Computer
Connecting the digital piano to a computer using the MIDI jacks enables you to transfer MIDI data between the piano and the computer.
In addition, installing Musicsoft Downloader on the computer enables you to transfer song data
between the instrument and the computer (page 31).
When this instrument is used as a tone module, performance data with voices that are not found on this instrument will not be played correctly.
Before you connect this instrument to a computer, first turn off the power to both this instrument and the computer. After you make the connections, turn on the power to the computer first, then turn on the power to this instrument.
An example of connecting this instrument to the USB port on a computer
Use an optional USB-MIDI interface (such as a Yamaha UX16) to connect this instrument’s MIDI jacks to the computer’s
USB port.
You must install the USB-MIDI driver on the computer correctly so that you can control your MIDI instrument from the computer. The USB-MIDI driver is a software application that enables MIDI signals to be transmitted between the sequence software on the computer and the connected MIDI instrument. For more information, refer to the user’s manual that came with the USB interface device.
Computer
MIDI
IN OUT
Connecting this instrument to the computer using a USB-MIDI interface
Turn off the power to this instrument. Connect the MIDI OUT cable from the USB-MIDI interface to this instrument’s MIDI IN jack, and connect the MIDI IN cable from the USB-MIDI interface to this instrument’s MIDI OUT jack.
The connection between this instrument and the computer has now been established.
Turn on the power to this instrument and try to transfer MIDI data to or from the computer.
For more information on connecting the YAMAHA UX16, refer to the user’s manual that came with the UX16.
You must install a software application on the computer to be able to transfer MIDI data between this instrument and a computer.
28 YDP-S31 Owner’s Manual
MIDI Functions
You can make detailed adjustments to MIDI settings.
MIDI Transmit/Receive Channel Selection
In any MIDI control setup, the MIDI channels of the transmitting and receiving equipment must be matched for proper data transfer.
This parameter enables you to specify the channel on which the digital piano transmits or receives MIDI data.
Procedure
Setting the transmit channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C1-E2 keys.
Default setting: Channel 1
Setting the receive channel
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press one of the C4-F5 keys.
Default setting: ALL
E2 E5
C1 D 2 C4 F5
2 4 7 9 11 14 16
1 3 5 6 8 10 12 13 15
For setting the transmit channels.
(C1–D 2)
OFF
2 4 7 9 11 14 16
1 3 5 6 8 10 12 13 15 1+2
For setting the receive channels.
(C4–F5)
For ALL mode
In Dual mode, Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this mode, no data is transmitted if the transmit channel is set to “OFF.”
ALL:
A “Multi-timbre” Receive mode is available. In this mode, this instrument receives different parts from the connected MIDI device on any or all 16 MIDI channels and plays multi-channel song data.
1+2:
A “1+2” Receive mode is available. It allows simultaneous reception on channels 1 and 2 only, enabling this instrument to play 1 and 2 channel song data received from a music computer or sequencer.
Program change and other like channel messages received will not affect this instrument’s panel settings or the notes you play on the keyboard.
Data for the demo song and 50 piano preset songs cannot be transmitted via MIDI.
Local Control ON/OFF
“Local Control” refers to the fact that, normally, the keyboard of this digital piano controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is “Local Control On,” since the internal tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the keyboard of this digital piano does not play the internal voices, but the appropriate MIDI information is still transmitted via the MIDI OUT jack when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the MIDI
IN jack.
Procedure
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C6 key. Pressing the C6 key repeatedly toggles between Local Control
On and Off.
C6
CAUTION
When Local control is turned
OFF, the keyboard of this instrument does not play the internal voices.
The highest key
YDP-S31 Owner’s Manual 29
Program Change ON/OFF
Normally this instrument will respond to MIDI program change numbers received from an external keyboard or other MIDI device, causing the correspondingly-numbered voice to be selected on the corresponding channel (the keyboard voice does not change). This instrument will normally also send a MIDI program change number whenever one of its voices is selected, causing the correspondingly-numbered voice or program to be selected on the external MIDI device if the device is set up to receive and respond to MIDI program change numbers.
This function makes it possible to cancel program change number reception and transmission so that voices can be selected on this instrument without affecting the external
MIDI device.
Procedure
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the C 6 key. Pressing the C 6 key repeatedly toggles between Program Change On and Off.
C 6
For information on program change numbers for each voice of this instrument, see the MIDI
Data Format information listed on our website. (Please refer to
The highest key
Control Change ON/OFF
MIDI Control Change data refers to MIDI information related to performance expression (such as damper pedal information).
You can transmit MIDI Control Change data from this instrument to control the operation of a connected MIDI device. (For example, if you operate this instrument’s damper pedal, this instrument will transmit MIDI Control Change data.)
On the other hand, MIDI performance data received on this instrument from a connected MIDI device will respond to MIDI Control Change data received from the
MIDI device at the same time. (However, the voice you are currently playing on the keyboard will not respond to the MIDI Control Change data.)
The ability to transmit and receive MIDI Control Change data is sometimes very useful. Turn Control Change On if it is convenient for you to have this capability. Turn
Control Change Off if you rather prefer not to have this capability.
Procedure
While holding down the [DEMO/SONG] and [PIANO/VOICE] buttons simultaneously, press the D6 key. Pressing the D6 key repeatedly toggles between Control
Change On and Off.
D6
For information on control changes that can be used with this instrument, see the MIDI
Data Format information listed on our website. (Please refer to
The highest key
30 YDP-S31 Owner’s Manual
Transmitting Song Data between the
Computer and the Digital Piano
In addition to the demo songs and the 50 piano preset songs stored in this instrument, you can play data for other song by loading it from a connected computer.
To be able to use this function, you must first download Musicsoft Downloader from
Yamaha website at the following URL, and install it on your computer.
http://music.yamaha.com/download/
● System requirement for Musicsoft Downloader
Please visit the URL above to get the latest information on the supported computer systems.
• OS
• CPU
• Memory
• Available hard disk capacity
• Display
• Others
:
:
:
Windows 2000/XP Home Edition/XP Professional/Vista
* For XP and Vista, the 32-bit version is supported, but not the 64-bit version.
Intel® Pentium® or Celeron® chip of 500MHz or higher
256MB or higher
:
:
:
128MB or higher (512MB or higher recommended)
800
×
600 High Color (16-bit)
Microsoft® Internet Explorer® version 5.5 or higher
You can download free Musicsoft Downloader from the
Yamaha website.
Loading Song Data from a Computer to the Digital Piano
You can load piano song data from a computer to this instrument. Also, after you record your performance on this instrument and save the recording to a computer, you can load the recording back to the instrument.
This instrument can read MIDI data in SMF Format 0. However, if such data includes any information for functions that are not supported by this instrument, the instrument will not play the data correctly.
For more information on loading song data from a computer to this instrument, please refer to “Transferring Data Between the Computer and Instrument (for unprotected data)” in the Help file that came with Musicsoft Downloader.
● Requirements for song data that can be loaded from a computer to this instrument
• Number of songs : Up to 10 songs plus one user song
• Maximum data size : Total 352 KB
• Data format : SMF Format 0 and 07YDP.BUP (user song)
You can play the loaded songs (page 17).
Transmitting Song Data from the
Digital Piano to a Computer
Musicsoft Downloader enables you to transfer the user song in this instrument to a computer. For more information on transferring song data from this instrument to a computer, please refer to “Transferring Data Between the Computer and Instrument
(for unprotected data)” in the Help file that came with Musicsoft Downloader.
● Data you can transfer from this instrument to a computer
• User song : 07YDP.BUP
• Song data (once it has been loaded from the computer)
SMF (Standard MIDI File)
This file features a popular sequence format (for recording performance data). This file is sometimes called a “MIDI file.”
The file extension is MID.
You can play the SMF format song using music software or a sequencer that supports SMF. This instrument also supports SMF.
CAUTION
Do not turn off the power to this instrument or unplug the instrument during data transmission. Otherwise, the data being transmitted will not be saved. Furthermore, flash memory operation may become unstable, causing the entire memory to be erased when you turn the power to the instrument on or off.
Keep in mind that the [REC] and [PLAY] indicators are lit when Musicsoft Downloader is being used.
Before you use this instrument, close the Musicsoft Downloader window and quit the application.
YDP-S31 Owner’s Manual 31
Backing up Data and Initializing the
Settings
Backing up data to flash memory
The following items will be stored in flash memory on this instrument. This data will be kept after you turn off the power to the instrument.
Backup data
Metronome volume
Metronome tempo
Touch sensitivity
Tuning
Recorded performance data (user song)
Initializing the settings
When you initialize the settings, all data, excluding the songs loaded from a computer, will be initialized and reset to the factory default settings.
While holding down the C7 (the highest) key, turn on the power to the instrument.
All backup data will be initialized.
C7
The highest key
CAUTION
Do not turn off the power to this instrument while it is initializing the data in its internal memory (that is, while the
[REC] and [PLAY] button indicators are flashing).
If this instrument somehow becomes disabled or malfunctions, turn off the power to the instrument, then perform the initialization procedure.
32 YDP-S31 Owner’s Manual
Troubleshooting
Problem Possible Cause and Solution
This instrument does not turn on.
Noise from the speakers or headphones is audible.
The overall volume is low, or no sound is heard.
The damper pedal has no effect, or the sound continuously sustains even when the damper pedal is not pressed.
This instrument has not been plugged in properly. Insert the adaptor plug into an AC
outlet and the adaptor socket into the unit securely (page 10).
The noise may be due to interference caused by the use of a mobile phone in close proximity to this instrument. Turn off the mobile phone, or move it further away from this instrument.
• The Master Volume is set too low. Set it to an appropriate level using the [MASTER
VOLUME] control.
• Make sure a pair of headphones is not connected to the headphones jack.
• Make sure that Local Control (page 29) is ON.
The pedal cord may not be properly connected. Make sure to securely insert the pedal
cord into the [TO PEDAL] jack (page 34).
Options
BC-100 Bench
A comfortable bench styled to match your Yamaha digital piano.
UX16
USB-MIDI interface
HPE-150
Headphones
YDP-S31 33
Keyboard Stand Assembly
CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct direction. Please assemble in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can cause damage.
• Be sure to tighten up all screws upon completing assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
Have a phillips-head (+) screwdriver of the appropriate size ready.
Remove all parts from the box. Confirm that all parts shown in the illustration are provided.
AC Power Adaptor* x 1
A
5 x 20mm thin screws x 2
6 x 30mm long screws x 4 Spacers x 2
B
6 x 20mm short screws x 4 Cord holders x 5
D E
C
Anti-fall brackets* x 2 * The two anti-fall brackets are identical. (Either one can be used for left or right.)
1
Attach B to C.
* The adaptor may not be included, or may look different from the illustration above, depending on your particular area. Please check with your Yamaha dealer.
11
Set B onto C with the black rim of the indentation on B facing front.
B
2
Attach B to D and E.
21
Align D and E with each end of B.
22
Attach D and E to B by tightening the long screws (6 x 30 mm) securely.
1
C
D E
12
Thread the thin screws (5 x 20 mm) through the spacers, then temporarily secure B and C from the rear using these screws.
B
B
2
C
* This illustration shows the view from the rear of B and C.
34 YDP-S31 Owner’s Manual
3
Mount A.
Be sure to place your hands at least 10 cm from either end of A when positioning it.
A
Align the screw holes.
CAUTION
• Be careful not to pinch your fingers or drop the unit.
• Do not hold the keyboard in any position other than the position instructed in this document.
4
Secure A.
41
Adjust the position of A so that the left and right ends of A will project beyond D and E equally when seen from the front.
42
Secure A by tightening four short screws (6 x 20 mm) from the bottom.
5
Connect the pedal cord.
51
Untie the bundled pedal cord, then insert the plug to the [TO PEDAL] jack from the rear.
52
Attach the cord holders to the rear panel as shown, then clip the cord into the holders.
53
Remove the screws from both ends of B, then attach the anti-fall brackets using the screws.
The two anti-fall brackets are identical.
(Either one can be used for left or right.)
1
2
B
3
A
A
1
CAUTION
• If there is no wall immediately behind the instrument, be sure to install anti-fall brackets on the instrument.
6
Connect the AC adaptor.
61
Insert the AC adaptor plug into the [DC IN
12V] jack from the rear.
62
Attach the cord holder on the right (or left) end (whichever is closer to an AC outlet) of the rear panel, then clip the power cord into the holder.
1
2
2
YDP-S31 Owner’s Manual 35
7
Secure C.
Move the instrument to the place you intend to use it, then while holding down the pedals so that
C comes in firm contact with the floor, firmly tighten the screws you temporarily fastened in step 1.
After completing the assembly, please check the following.
• Are there any parts left over?
➝
Review the assembly procedure and correct any errors.
• Is the instrument clear of doors and other movable fixtures?
➝
Move the instrument to an appropriate location.
• Does the instrument make a rattling noise when you shake it?
➝
Tighten all screws.
• Are the pedal and power cords inserted securely into the sockets?
➝
Check the connection.
• If the main unit creaks or is otherwise unsteady when you play on the keyboard, refer to the assembly diagrams and retighten all screws.
C
CAUTION
• The pedals may damage the floor after an extended period of time. Protect the floor by placing a mat or area rug underneath the pedals.
CAUTION
When moving the instrument after assembly, always hold instrument by the lower surface in the front of the main unit and by the handles in the rear panel.
Do not hold the key cover or top portion. Improper handling can result in damage to the instrument or personal injury.
Do not hold here.
Hold here.
36 YDP-S31 Owner’s Manual
Index
Numerics
50 Piano Preset Songs .....................................................16
A
Accessories .........................................................................8
Assembly ....................................................................34–36
C
Center Pedal ..............................................................14, 19
Connecting a Computer .................................................28
D
Damper Pedal ............................................................14, 19
DC IN 12V .........................................................................9
DEMO/SONG ...........................................................14–15
Dual mode .......................................................................21
I
Initializing the Settings ...................................................32
K
Keyboard Stand .........................................................34–36
Keyboard Touch..............................................................24
L
Layering Two Voices (Dual mode) ................................21
Left Pedal ...................................................................14, 19
M
MASTER VOLUME ..................................................12, 14
METRONOME .........................................................14, 23
MIDI ................................................................................27
MIDI [IN] [OUT] ...............................................14, 27, 28
MIDI cables .....................................................................27
MIDI connectors .......................................................27, 28
MIDI Data Format ............................................................5
MIDI Implementation Chart............................................5
Musicsoft Downloader....................................................31
P
PEDAL ............................................................................. 19
PHONES.................................................................... 12, 14
PIANO/VOICE ......................................................... 14, 18
PLAY.......................................................................... 14, 26
Playing Back Recorded Performance Data .................... 26
Preset songs
50 Piano Preset Songs ........................... 16
R
REC ............................................................................ 14, 25
Recording your Performance ......................................... 25
Reverb .............................................................................. 20
Reverb Depth .................................................................. 20
Right Pedal ................................................................ 14, 19
S
SELECT –/+...............................................................14–16
Soft Pedal................................................................... 14, 19
Song ................................................................................. 16
Sostenute Pedal ......................................................... 14, 19
Specifications................................................................... 39
Stand ..........................................................................34–36
STANDBY/ON.......................................................... 10, 14
Start/Stop playback
50 Piano Preset Songs ............................................... 16
Demo Songs............................................................... 15
T
Tempo (metronome)...................................................... 23
TO PEDAL .................................................................. 9, 35
Touch Sensitivity............................................................. 24
Transmitting Song Data ................................................. 31
Transporting ..................................................................... 8
Transposition .................................................................. 22
Troubleshooting.............................................................. 33
U
User Song......................................................................... 25
UX16................................................................................ 28
V
Voice ................................................................................ 18
Volume (metronome) .................................................... 24
YDP-S31 Owner’s Manual 37
MEMO
38 YDP-S31 Owner’s Manual
Appendix/Anhang/Annexe/Apéndice
Specifications / Technische Daten /
Caractéristiques techniques / Especificaciones
Keyboard
Sound Source
Polyphony
Voice Selection
Effect
Volume
Controls
Pedal
Demo Songs
Recording Function
Loading song data from a computer
Jacks/Connectors
Main Amplifiers
Speakers
Dimensions (W
×
D
×
H)
Weight
Accessories
GHS (Granded Hammer Standard) keyboard with matte black keytops
88 keys (A-1 – C7)
AWM Stereo Sampling
64 Notes Max.
6
Reverb
Master Volume
Dual, Metoronome, Transpose
Damper (with half-pedal effect), Sostenuto, Soft
6 Demo Songs, 50 Piano Preset Songs
One song 65 KB (approx. 11,000 notes)
Up to 10 songs; Total maximum size 352 KB
MIDI (IN/OUT), PHONES
×
2
6W × 2
Oval (12cm
×
6cm)
×
2
With key cover closed: 1390mm x 299mm x 783mm [54-3/4" x 11-3/4" x 30-13/16"]
With key cover open: 1390mm x 299mm x 982mm [54-3/4" x 11-3/4" x 38-11/16"]
With back toes attached, the depth is 370mm [14-9/16"]
36kg (79 lbs., 6 oz.)
Owner’s Manual, “50 greats for the Piano” (Music Book), Quick Operation Guide,
Assembly parts
* Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
* Die technischen Daten und Beschreibungen in dieser Bedienungsanleitung dienen nur der Information. Yamaha Corp. behält sich das Recht vor, Produkte oder deren technische Daten jederzeit ohne vorherige Ankündigung zu verändern oder zu modifizieren. Da die technischen Daten, das Gerät selbst oder Sonderzubehör nicht in jedem Land gleich sind, setzen Sie sich im Zweifel bitte mit
Ihrem Yamaha-Händler in Verbindung.
* Les caractéristiques techniques et les descriptions du mode d’emploi ne sont données que pour information. Yamaha Corp. se réserve le droit de changer ou modifier les produits et leurs caractéristiques techniques à tout moment sans aucun avis. Du fait que les caractéristiques techniques, les équipements et les options peuvent différer d’un pays à l’autre, adressez-vous au distributeur
Yamaha le plus proche.
* Las especificaciones y descripciones de este manual del propietario tienen sólo el propósito de servir como información. Yamaha
Corp. se reserva el derecho a efectuar cambios o modificaciones en los productos o especificaciones en cualquier momento sin previo aviso. Puesto que las especificaciones, equipos u opciones pueden no ser las mismas en todos los mercados, solicite información a su distribuidor Yamaha.
YDP-S31 Owner’s Manual/Bedienungsanleitung/Mode d’emploi/Manual de instrucciones 39
Information for Users on Collection and Disposal of Old Equipment
This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products, please take them to applicable collection points, in accordance with your national legislation and the Directives 2002/96/EC.
By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the European Union]
This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal.
Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte
Befindet sich dieses Symbol auf den Produkten, der Verpackung und/oder beiliegenden Unterlagen, so sollten benutzte elektrische Geräte nicht mit dem normalen Haushaltsabfall entsorgt werden.
In Übereinstimmung mit Ihren nationalen Bestimmungen und den Richtlinien 2002/96/EC, bringen Sie alte Geräte bitte zur fachgerechten Entsorgung, Wiederaufbereitung und Wiederverwendung zu den entsprechenden Sammelstellen.
Durch die fachgerechte Entsorgung der Elektrogeräte helfen Sie, wertvolle Ressourcen zu schützen und verhindern mögliche negative Auswirkungen auf die menschliche Gesundheit und die Umwelt, die andernfalls durch unsachgerechte Müllentsorgung auftreten könnten.
Für weitere Informationen zum Sammeln und Wiederaufbereiten alter Elektrogeräte, kontaktieren Sie bitte Ihre örtliche Stadt- oder Gemeindeverwaltung, Ihren Abfallentsorgungsdienst oder die Verkaufsstelle der Artikel.
[Information für geschäftliche Anwender in der Europäischen Union]
Wenn Sie Elektrogeräte ausrangieren möchten, kontaktieren Sie bitte Ihren Händler oder
Zulieferer für weitere Informationen.
[Entsorgungsinformation für Länder außerhalb der Europäischen Union]
Dieses Symbol gilt nur innerhalb der Europäischen Union. Wenn Sie solche Artikel ausrangieren möchten, kontaktieren Sie bitte Ihre örtlichen Behörden oder Ihren Händler und fragen Sie nach der sachgerechten Entsorgungsmethode.
Information concernant la Collecte et le Traitement des déchets d’équipements
électriques et électroniques.
Le symbole sur les produits, l'emballage et/ou les documents joints signifie que les produits
électriques ou électroniques usagés ne doivent pas être mélangés avec les déchets domestiques habituels.
Pour un traitement, une récupération et un recyclage appropriés des déchets d’équipements
électriques et électroniques, veuillez les déposer aux points de collecte prévus à cet effet, conformément à la réglementation nationale et aux Directives 2002/96/EC.
En vous débarrassant correctement des déchets d’équipements électriques et électroniques, vous contribuerez à la sauvegarde de précieuses ressources et à la prévention de potentiels effets négatifs sur la santé humaine qui pourraient advenir lors d'un traitement inapproprié des déchets.
Pour plus d'informations à propos de la collecte et du recyclage des déchets d’équipements
électriques et électroniques, veuillez contacter votre municipalité, votre service de traitement des déchets ou le point de vente où vous avez acheté les produits.
[Pour les professionnels dans l'Union Européenne]
Si vous souhaitez vous débarrasser des déchets d’équipements électriques et électroniques veuillez contacter votre vendeur ou fournisseur pour plus d'informations.
[Information sur le traitement dans d'autres pays en dehors de l'Union
Européenne]
Ce symbole est seulement valables dans l'Union Européenne. Si vous souhaitez vous débarrasser de déchets d’équipements électriques et électroniques, veuillez contacter les autorités locales ou votre fournisseur et demander la méthode de traitement appropriée.
Información para Usuarios sobre Recolección y Disposición de Equipamiento
Viejo
Este símbolo en los productos, embalaje, y/o documentación que se acompañe significa que los productos electrónicos y eléctricos usados no deben ser mezclados con desechos hogareños corrientes.
Para el tratamiento, recuperación y reciclado apropiado de los productos viejos, por favor llévelos a puntos de recolección aplicables, de acuerdo a su legislación nacional y las directivas
2002/96/EC.
Al disponer de estos productos correctamente, ayudará a ahorrar recursos valiosos y a prevenir cualquier potencial efecto negativo sobre la salud humana y el medio ambiente, el cual podría surgir de un inapropiado manejo de los desechos.
Para mayor información sobre recolección y reciclado de productos viejos, por favor contacte a su municipio local, su servicio de gestión de residuos o el punto de venta en el cual usted adquirió los artículos.
[Para usuarios de negocios en la Unión Europea]
Si usted desea deshacerse de equipamiento eléctrico y electrónico, por favor contacte a su vendedor o proveedor para mayor información.
[Información sobre la Disposición en otros países fuera de la Unión Europea]
Este símbolo sólo es válidos en la Unión Europea. Si desea deshacerse de estos artículos, por favor contacte a sus autoridades locales y pregunte por el método correcto de disposición.
FCC INFORMATION (U.S.A.)
1.
IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to use the product.
2.
IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the USA.
3.
NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations,
Part 15 for Class “B” digital devices. Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/ uses radio frequencies and, if not installed and used according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit “OFF” and “ON”, please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600
Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
(class B)
OBSERVERA!
Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den ar ansluten till vägguttaget, även om själva apparaten har stängts av.
ADVARSEL: Netspæendingen til dette apparat er IKKE afbrudt, sålæenge netledningen siddr i en stikkontakt, som er t endt — også selvom der or slukket på apparatets afbryder.
VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko laitetta verkosta.
(standby)
IMPORTANT NOTICE FOR THE UNITED KINGDOM
Connecting the Plug and Cord
IMPORTANT. The wires in this mains lead are coloured in accordance with the following code:
BLUE : NEUTRAL
BROWN : LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured makings identifying the terminals in your plug proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the three pin plug.
• This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.
(2 wires)
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below.
Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.
Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten
Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen
Bestimmungsländern erhältlich.
Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo.
NORTH AMERICA
CANADA
Yamaha Canada Music Ltd.
135 Milner Avenue, Scarborough, Ontario,
M1S 3R1, Canada
Tel: 416-298-1311
U.S.A.
Yamaha Corporation of America
6600 Orangethorpe Ave., Buena Park, Calif. 90620,
U.S.A.
Tel: 714-522-9011
CENTRAL & SOUTH AMERICA
MEXICO
Yamaha de México S.A. de C.V.
Calz. Javier Rojo Gómez #1149,
Col. Guadalupe del Moral
C.P. 09300, México, D.F., México
Tel: 55-5804-0600
BRAZIL
Yamaha Musical do Brasil Ltda.
Rua Joaquim Floriano, 913 - 4' andar, Itaim Bibi,
CEP 04534-013 Sao Paulo, SP. BRAZIL
Tel: 011-3704-1377
ARGENTINA
Yamaha Music Latin America, S.A.
Sucursal de Argentina
Olga Cossettini 1553, Piso 4 Norte
Madero Este-C1107CEK
Buenos Aires, Argentina
Tel: 011-4119-7000
PANAMA AND OTHER LATIN
AMERICAN COUNTRIES/
CARIBBEAN COUNTRIES
Yamaha Music Latin America, S.A.
Torre Banco General, Piso 7, Urbanización Marbella,
Calle 47 y Aquilino de la Guardia,
Ciudad de Panamá, Panamá
Tel: +507-269-5311
EUROPE
THE UNITED KINGDOM
Yamaha Music U.K. Ltd.
Sherbourne Drive, Tilbrook, Milton Keynes,
MK7 8BL, England
Tel: 01908-366700
IRELAND
Danfay Ltd.
61D, Sallynoggin Road, Dun Laoghaire, Co. Dublin
Tel: 01-2859177
GERMANY
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
SWITZERLAND/LIECHTENSTEIN
Yamaha Music Central Europe GmbH,
Branch Switzerland
Seefeldstrasse 94, 8008 Zürich, Switzerland
Tel: 01-383 3990
AUSTRIA
Yamaha Music Central Europe GmbH,
Branch Austria
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-60203900
CZECH REPUBLIC/SLOVAKIA/
HUNGARY/SLOVENIA
Yamaha Music Central Europe GmbH,
Branch Austria, CEE Department
Schleiergasse 20, A-1100 Wien, Austria
Tel: 01-602039025
POLAND
Yamaha Music Central Europe GmbH
Sp.z. o.o. Oddzial w Polsce ul. 17 Stycznia 56, PL-02-146 Warszawa, Poland
Tel: 022-868-07-57
THE NETHERLANDS/
BELGIUM/LUXEMBOURG
Yamaha Music Central Europe GmbH,
Branch Benelux
Clarissenhof 5-b, 4133 AB Vianen, The Netherlands
Tel: 0347-358 040
FRANCE
Yamaha Musique France
BP 70-77312 Marne-la-Vallée Cedex 2, France
Tel: 01-64-61-4000
ITALY
Yamaha Musica Italia S.P.A.
Viale Italia 88, 20020 Lainate (Milano), Italy
Tel: 02-935-771
SPAIN/PORTUGAL
Yamaha Música Ibérica, S.A.
Ctra. de la Coruna km. 17, 200, 28230
Las Rozas (Madrid), Spain
Tel: 91-639-8888
GREECE
Philippos Nakas S.A. The Music House
147 Skiathou Street, 112-55 Athens, Greece
Tel: 01-228 2160
SWEDEN
Yamaha Scandinavia AB
J. A. Wettergrens Gata 1, Box 30053
S-400 43 Göteborg, Sweden
Tel: 031 89 34 00
DENMARK
YS Copenhagen Liaison Office
Generatorvej 6A, DK-2730 Herlev, Denmark
Tel: 44 92 49 00
FINLAND
F-Musiikki Oy
Kluuvikatu 6, P.O. Box 260,
SF-00101 Helsinki, Finland
Tel: 09 618511
NORWAY
Norsk filial av Yamaha Scandinavia AB
Grini Næringspark 1, N-1345 Østerås, Norway
Tel: 67 16 77 70
ICELAND
Skifan HF
Skeifan 17 P.O. Box 8120, IS-128 Reykjavik, Iceland
Tel: 525 5000
RUSSIA
Yamaha Music (Russia)
Office 4015, entrance 2, 21/5 Kuznetskii
Most street, Moscow, 107996, Russia
Tel: 495 626 0660
OTHER EUROPEAN COUNTRIES
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: +49-4101-3030
MIDDLE EAST
TURKEY/CYPRUS
Yamaha Music Central Europe GmbH
Siemensstraße 22-34, 25462 Rellingen, Germany
Tel: 04101-3030
OTHER COUNTRIES
Yamaha Music Gulf FZE
LOB 16-513, P.O.Box 17328, Jubel Ali,
Dubai, United Arab Emirates
Tel: +971-4-881-5868
ASIA
THE PEOPLE’S REPUBLIC OF CHINA
Yamaha Music & Electronics (China) Co.,Ltd.
25/F., United Plaza, 1468 Nanjing Road (West),
Jingan, Shanghai, China
Tel: 021-6247-2211
HONG KONG
Tom Lee Music Co., Ltd.
11/F., Silvercord Tower 1, 30 Canton Road,
Tsimshatsui, Kowloon, Hong Kong
Tel: 2737-7688
INDIA
Yamaha Music India Pvt. Ltd.
5F Ambience Corporate Tower Ambience Mall Complex
Ambience Island, NH-8, Gurgaon-122001, Haryana, India
Tel: 0124-466-5551
INDONESIA
PT. Yamaha Music Indonesia (Distributor)
PT. Nusantik
Gedung Yamaha Music Center, Jalan Jend. Gatot
Subroto Kav. 4, Jakarta 12930, Indonesia
Tel: 21-520-2577
KOREA
Yamaha Music Korea Ltd.
8F, 9F, Dongsung Bldg. 158-9 Samsung-Dong,
Kangnam-Gu, Seoul, Korea
Tel: 080-004-0022
MALAYSIA
Yamaha Music Malaysia, Sdn., Bhd.
Lot 8, Jalan Perbandaran, 47301 Kelana Jaya,
Petaling Jaya, Selangor, Malaysia
Tel: 3-78030900
PHILIPPINES
Yupangco Music Corporation
339 Gil J. Puyat Avenue, P.O. Box 885 MCPO,
Makati, Metro Manila, Philippines
Tel: 819-7551
SINGAPORE
Yamaha Music Asia Pte., Ltd.
#03-11 A-Z Building
140 Paya Lebor Road, Singapore 409015
Tel: 747-4374
TAIWAN
Yamaha KHS Music Co., Ltd.
3F, #6, Sec.2, Nan Jing E. Rd. Taipei.
Taiwan 104, R.O.C.
Tel: 02-2511-8688
THAILAND
Siam Music Yamaha Co., Ltd.
4, 6, 15 and 16 th
floor, Siam Motors Building,
891/1 Rama 1 Road, Wangmai,
Pathumwan, Bangkok 10330, Thailand
Tel: 02-215-2626
OTHER ASIAN COUNTRIES
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2317
AFRICA
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
OCEANIA
AUSTRALIA
Yamaha Music Australia Pty. Ltd.
Level 1, 99 Queensbridge Street, Southbank,
Victoria 3006, Australia
Tel: 3-9693-5111
NEW ZEALAND
Music Works LTD
P.O.BOX 6246 Wellesley, Auckland 4680,
New Zealand
Tel: 9-634-0099
COUNTRIES AND TRUST
TERRITORIES IN PACIFIC OCEAN
Yamaha Corporation,
Asia-Pacific Music Marketing Group
Nakazawa-cho 10-1, Naka-ku, Hamamatsu,
Japan 430-8650
Tel: +81-53-460-2312
HEAD OFFICE Yamaha Corporation, Pro Audio & Digital Musical Instrument Division
Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650
Tel: +81-53-460-3273
EKB46
Yamaha Home Keyboards Home Page http://music.yamaha.com/homekeyboard/
Yamaha Manual Library http://www.yamaha.co.jp/manual/
U.R.G., Pro Audio & Digital Musical Instrument Division,Yamaha Corporation
© 2008 Yamaha Corporation
WQ55600 809APAP1.3-01A0
Printed in China
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement