Maxim 2122ICSN Basix 9 in. 100 W 3-Light Iron Medium Bracket Installation manual

Assembly Instruction For

2122,85133

1. Pull the power supply wires out from the OUTLET BOX (A), and mount the

universal mounting plate ( B ) to the OUTLET BOX (A), using MOUNTING

SCREWS (C)

2. Attach the power supply wires to the fixture load wires by connecting BLACK

to BLACK, and WHITE to WHITE . Attach the POWER SUPPLY GROUND

WIRE from the OUTLET BOX (A) and the FIXTURE GROUND WIRE from

the fixture to the GREEN GROUND SCREW (E) on the universal mounting

plate ( B ) or connect both wires together using the correct size of wire

connectors.

3. Placing the BASE (D) on the fixture over the OUTLET BOX (A) and onto the

fixture mounting screws (G), and adjust the fixture mounting screws until they

protrude out from the BASE (D). Remove the BASE and secure the position of

the fixture mounting screws by tightening the HEX NUT (F) against the

universal mounting plate ( B ) . Place the BASE (D) back onto the fixture

mounting screws and secure into place using the FINIAL (H) provided.

4. Loosen out the socket ring (K ) from the socket (I). Fit the glass shade (J) onto the

socket (I) and tighten with the socket ring (K).

Please consult a qualified Electrician if you are not familiar with electrical wiring.