MA4052 Self-Drain Spa Speaker Installation Guide
Cutout and use as template for drilling
5.87
” (149mm)
Overall Diameter
4.33
” (110mm)
Cutout Diameter
Installation: Find a suitable location making sure there is clearance for the installed depth. Use a hole saw or other suitable device to make a cutout.
Place the speaker in the cutout and mark and drill holes for the mounting screws (supplied). If the panel is too thin or soft for screws use the stainless screw clips in the hardware kit.
Red dot or with + sign or larger tab as shown on the diagram below is the positive.
Please Note: Twist counter clockwise to remove the grill. When putting the grill back, twist clockwise until you hear a click.
Mounting Depth
1.93
”(49mm)
Scale= 1:1
Reproduction may change accuracy
1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274 www.polyplanar.com
