MA5104 Round Speaker Installation Guide
Cutout and use as template for drilling
1/8”
Hole Diameter
5.41
”
Overall Diameter
Installation: Find a suitable location making sure there is clearance for the installed depth.
Use a hole saw or other suitable device to make a cutout.
Place the speaker in the cutout and mark and drill holes for the mounting screws
(supplied). If the panel is too thin or soft for screws use a stainless screw clips.
Attach speaker wires supplied, solid color wire to positive (red dot or with + sign or larger tab as shown on the diagram).
Mounting Depth
2.05
”
4.08
”
Cutout Diameter
Scale= 1:1
Reproduction may change accuracy
1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274 • www.polyplanar.com
