advertisement
▼
Scroll to page 2
of
22
Use & Care Guide Manual de Uso y Cuidado Engish / Espaiol Models/Modelos: 253.79184, 253.71124, 253.70128 I<enmore. P/N 2020217A2427 Sears Brands Management Hoffrnan Estates, IL 60179 www.kenrnore.corn www.sears.corn Corporation U.S.A. TABLE OF Warranty ................................................................ 2 Care and Cleaning ........................................... 9 Master CONTENTS Protection Important Safety Air conditioner Additional Agreements ............................ 3 Energy Saving Ideas .............................................. Instructions ................................ 4 Troubleshooting Guide ........................................... Feature ......................................... Things ................................................... Kenmore Limited Warranty When installed, operated and maintained defect in material arrange and workmanship 5-7 Normal 8 Call for Service ....................................................... according Sounds ........................................................ to all supplied within one year from instructions, the date if this product of purchase,call fails due to a 1-800-4-MY-HOME ® to for free repair. If the sealed refrigerant 1-800-4-MY-HOME All warranty system of this product ® to arrange coverage other than private applies family for free is defective within five years from the purchase date, call repair. for only 90 days from the date of purchase if this product is ever used for purposes. This warranty covers only 1. Expendable items that can wear defects in material and workmanship. out from normal use, including Sears wlll NOT pay for: but not limited to filters, belts, light bulbs, and bags. 2. A service technician to instruct the user in correct 3. A service technician to clean or maintain 4. Damage to or failure instructions 5. Damage supplied if it is not installed, of this product resulting to or failure of this product caused than those recommended 7. Damage to or failure from of implied Customer's sole and exclusive warranties, in all instructions operated accident, or maintenance. or maintained according to the all abuse, misuse or use for other than its warranties; including limitation remedy damages. Some states and provinces damages, or limitation may not apply This warranty you specific on the duration applies legal or utensils other made to this product. of remedies warranty shall be product do not allow of implied the exclusion warranties repair or fitness for a particular by law. Sears shall not be liable for incidental or limitation of merchantability as provided purpose, herein. are limited Corporation, Ontario, of incidental or consequential or fitness, so these exclusions is used in the United States or Canada. Hoffman Canada Estates, IL 60179 M5B 2C3 2 to or consequential to you. only while this appliance Inc., Toronto, chemicals modifications rights, and you may also have other rights which vary from Sears Brands Management Sears Canada from unauthorized of merchantability allowed cleaners, with the product. under this limited warranties or the shortest period or limitations by the use of detergents, supplied of parts or systems resulting Disclaimer one year operation purpose. 6. Damage Implied installation, with the product. to or failure intended of this product product this product. This warranty state to state. gives 9 1 0-1 1 11 Back Cover Master Protection Agreements Congratulations on making dependable operation. when having a Master The Master a smart purchase. But like all products, Protection Protection Agreement Agreement Your new Kenmore ® product it may require preventive can save you money and also helps extend the life is designed and manufactured maintenance or repair for years of from time to time. That's aggravation. of your new product. Here's what the Agreement _ includes: [] Parts and labor coverage goes well -[] needed to help keep beyond products the product operating warranty, properly under No deductibles, normal use, not just defects. no functional failure excluded Our from coverage real protection, Expert service by a force of more you can trust will be working [] Unlimited [] _No-lemon service calls and _ guarantee than 10,000 authorized Sears service technicians, which means someone on your product. nationwide -- service, replacement as often of your covered as you want product us, whenever if four or more you want product us. failures occur within twelve months. [] Product replacement [] Annual [] Fast help Preventive if your covered Maintenance by phone -- product we call it Rapid Think of us as a _'talking owner's manual." [] Power against electrical [] $250 surge protection Food refrigerator Loss Protection annually Rental [] 10°/0 discount reimbursement off the regular Once you purchase the Agreement, day The Master if repair Protection period, expires. Purchase Some limitations Resolution -- damage no extra phone spoilage charge. support due to power for any food Agreement we will provide your Master and exclusions of your covered product from a Sears representative on all products. fluctuations. that is the result of mechanical takes price of any non-covered a simple phone or night, or schedule warranty be fixed. request-- failure of any covered or freezer. [] anytime can't Check at your longer repair call is all that it takes a service appointment online. is a risk free purchase. If you cancel a full Or, a prorated refund. Protection Agreement apply. than promised. service and refund related installed for you to schedule for any reason anytime after during parts. service. You can call the product the product warranty period today! For prices and additional information in the U.S.A.call 1-800-827-6655. Coverage in Canada Sears Installation varies on some items. For full details call Sears Canada at 1-800-361-6665. Service For Sears professional installation items, in the U.S.A. or Canada of home appliances, call This Use & Care air conditioner cover every caution garage 1-800-4-MY-HOME Guide provides only as instructed possible condition must be practiced specific and situation when installing, and Serial Numbers Record in the space provided located on the outside of the cabinet, instructed may be easier under operating in this guide. Record Your Model the numbers door openers, water heaters, and other major ®. below that the model for your and and serial or behind filter maintaining numbers. at the bottom or by removing " Model Number : Serial Number : Purchase Date : 3 model. Use the are not meant to may occur. Common operating, by using a flashlight '' Care and Cleaning. instructions These instructions sense and any appliance. The serial plate of unit. Reading the cabinet front as is home important Safety Read all instructions instructions before using this air conditioner. For Your Safety Do not store or use gasoline or other flammable or any other appliance. The power supply cord with this air conditioner containsa current detection device designed to reduce the risk of fire. Please refer to the section'Operation of Current Device' for details. In the event that the power supply cord is damaged, it cannot be repaired, and it must be replaced with a cord from the Product manufacturer. Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove any prong from the power cord. Grounding receptacle Unit must be upright press RESET Prevent Accidents To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner, follow basic precautions, including the following: Be sure the electrical service is adequate for the model you have chosen. This information can be found on the nameplate, which is located on the side of the cabinet. If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass first. If the window is a triple-track type with a screen panel included,remove the screen completely before installation. Be sure the air conditioner has been securely and correctly installed according to the separate installation instructions provided with this manual. Save this manual and the installation instructions for possible future use in removing or reinstalling this unit. When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front and rear coils. Electrical information READ THIS SECTION Plug in & and other warnings. type wall Power supply cord with 3-prong grounding plug and current detection device Operation Device vapors and liquids in the vicinity of this Read product labels for flammability The complete electrical rating of your new room air conditioner is stated on the serial plate. Refer to the rating when checking the electrical requirements. Be sure the air conditioner is properly grounded. To minimize shock and fire hazards, proper grounding is important. The power cord is equipped with a three-prong grounding plug for protection against shock hazards. Your air conditioner must be used in a properly grounded wall receptacle. If the wall receptacle you intend to use is not adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper receptacle. Do not run air conditioner without outside protective cover in place. This could result in mechanical damage within the air conditioner. Do not use an extension cord or an adapter plug. BEFORE ATTEMPTING TO OPERATE AIR CONDITIONER. for one hour prior to operating. of Current The power supply cord contains a current device that senses damage to the power cord. To test your power supply cord do the following: 1. Plug in the Air Conditioner. 2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will notice a click as the RESET button pops out. 3. Press the RESET button. Again you will notice a click as the button engages. 4. The power supply cord is now supplying electricity to the unit. (On some products this is also indicated by a light on the plug head). NOTES: • Do not use this device to turn the unit on or off. • Always make sure the RESET button is pushed in for correct operation. • The power supply cord must be replaced if it fails to reset when either the TEST button is pushed, or it cannot be reset. A new one can be obtained by contacting Sears at 1-800-4-MY-HOME ®. ° if power supply cord is damaged, it CANNOT be repaired, it MUST be replaced by one obtained by contacting Sears at 1-800-4-MY-HOME ®. 4 Air Conditioner ELECTRONIC Features CONTROL Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then touch the symbol pads for the functions you desire. The unit can be controlled by the panel touch pads or with the remote control. HEAT INDICATOR (on some models) DISPLAYS ADJUSTS TEMPERATURE/TIME TEMPERATURE OR TIME .................................. SETS FAN SPEEDS SETSMODE .................................. INFRARED REMOTE WINDOW .................................. FILTERRESET BUTTON SLEEP MODE ACTIVATES TIMER TURNS UNIT ON OR OFF T OUCH PAD REMOTE CONTROL TO REPLACE BATTERY 4k_ SETS FAN SPEEDS TAB ADJUSTS TEMP & TIME Battery Size: CR2025 AUTO FAN SLEEP MODE Turn Remote Control remove battery POSITIVE("+") side facing Re-insert battery 5 upside down. Squeeze tray. Place battery tray. tab and pull to in tray with UP, according to diagram. Air Conditioner Note: The fallowing Remote Control. Features instructions (continued) describe the Control To turn unit on or off press the ON/OFF To use Cool, press the MODE To change the Temperature Panel Touch Pads. The same instructions apply to the _) button: button to select: Setting use the UP and Down arrows as required: To adjust Fan Speeds press the Fan Speed button and select: LOW MED To use the Auto Fan Feature HIGH press the Fan Speed button and select AUTO: Note: Fan speed dictates. starts at high and adiusts to a slower speed as the room temperature Far example, if the room doesn't If the room temperature automatically rises quicHy, such as when a door is opened, go to the highest speed. The fan speed will re-adiust speed as the room returns to the original To operate get too warm it will stay at the slowest speed. on Fan Only, press the MODE it will back to the slowest set temperature. button to select: Use Fan Only function to circulate any fan speed you prefer DISPLAY. room air without air conditioner and the actual room temperature 6 cooling. You can use will be displayed in the Air Conditioner Features (continued) To use Energy Saver press the MODE button to select: You will save energy usage in this mode. The compressor the room is at the desired temperature. 10 minutes until the room is above and motor will turn off once The air will be sampled for 20 seconds every the set temperature, at which point the compressor turns back on and the fan runs. The entire process is now repeated. To use the Sleep feature press the SLEEP button and the LED will illuminate: The set temperature will increase 2 °F 30 minutes after this mode is selected. It will increase again after 30 minutes by another 2 °F. It will stay at this set point for 7 hours, and then return to the original setting. To use the Timer function press the TIMER button and the LED will illuminate: Press the UP and DOWN arrows to select the desired time up to 24 hrs. The control will count down the time remaining in 1 and 0.5 hr increments. If you need to change the set temperature, press MODE then the UP/DOWN will revert to the hours remaining. button. The mode will operate arrows. Then after 5 seconds the display This mode can be cancelled by pressing the TIMER one time, then the above steps have to be repeated. NOTE= Timer button is functional when On/Off button is set to either On or Off. set to On, the amount selected is the time remaining When until the unit shuts Off. When set to Off, the amount is the time until the unit turns On. Check Filter Feature: After 250 hours of operation, the Filter Reset LED will light. This is a reminder to clean the filter housed behind the front panel to keep the unit operating efficiently. Pressing the FILTER RESETbutton for 3 seconds will reset this reminder and turn off the LED. Heating Feature (on some models): This feature can be used with any combination of FAN Speeds, Timer, or Sleep Modes. When in the "Heat" Mode, the fan will run continuously while heat is needed. temperature will automatically be maintained (27 °C). When the set temperature is satisfied, anywhere between The 55 °F(13 °C) and 80 °F the fan will cycle off and on to circulate and sample the room air. Note= When unit is shut off in the Heat Mode, the Fan will continue to run for a few seconds to dissipate residual heat within the unit. 7 ADDiTiONAL THINGS YOU SHOULD KNOW Now that you understand familiar. the basic operation functions, here are more control features with which you should became The "cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue to run during this time. There is a 2-Second delay for the compressar shutting dawn when selecting possibility of having to roll through to select another mode. The control will maintain the set temperature 55°F and 80°F (in heat mode). within 2 degrees Fahrenheit, FAN ONLY/HEAT. between This is to cover the 60°F and 90°F (in cool mode), The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other and back, press and hold bath the "TEMP/TIMER" Up(A) and Dawn (v) buttons for 3 seconds. FAULTCODES : If the display reads "HS", "ES" or "AS", a sensor has failed. Contact 1 -800-4-MY-HOME® Heat sensor AUTO After Evaporator coil sensor for repair. Air temperature sensor RE-START : a power outage, the unit will remember FRESH AiR VENT CONTROL ( On 253.79184 the last setting and return the unit to the same setting model once power is restored. ) 1. Pushed In (Fig. 1) - Recirculates inside air 2. Partially Pulled Out (Fig. 2) - Draws fresh air into room 3. Fully Pulled Out (Fig. 3) - Exhausts air from room and draws fresh air into room Figure Figure 2 ( VENT OPEN ) 1 (VENT CLOSED ) Figure 3 ( VENT & EXHAUST OPEN ) 8 LOUVERS Air Directional Air directional 4-way AUGER WHEEL Care and Cleaning Louvers louvers control directional air flow direction. system described Your air conditioner has the below. The louvers will allow you to direct the air flow Up or Down and Left or Right throughout the room as needed. Rotate the Auger Wheel until the desired Left or Right direction is obtained. Pivot horizontal louvers with your fingertips until the desired Up!Down direction is obtained. There are a total of 4 possible air directional orientations available with this system. Clean your air conditioner occasionally to keep it looking new. Be sure to unplug the unit before cleaning to prevent shock or fire hazards. Air Filter Cleaning The air filter should be checked at least once a month to see if cleaning necessary. Trapped particles in the filter can build up and block air from flowing coils and cause an accumulation of frost on the cooling coils. • . • • • is to cooling On models with Fresh Air Vent Control, push in control to vent closed position. Open the front panel. Grasp the filter by the center and pull up and out. Wash the filter using liquid dishwashing detergent and warm water. Rinse filter thoroughly. Gently shake excess water from the filter. Be sure filter is thoroughly dry before replacing. Or instead of washing, you may vacuum the filter clean. Cabinet Cleaning • Be sure to unplug the air conditioner to prevent shack or fire hazard. The cabinet and front may be dusted with an oil-free cloth or washed with a cloth dampened in a solution of warm water and mild liquid dishwashing detergent. Rinse thoroughly and wipe dry. • Never use harsh cleaners, wax or polish on the cabinet front. • Be sure to wring excess water from the cloth before wiping around the controls. Excess water in or around the controls may cause damage to the air conditioner. • Plug in air conditioner. Winter Storage If you plan to store the air conditioner during from the window according to the installation or return it to the original carton. NOTE: Store air conditioner tal with base down). Energy Saving Ideas the winter, remove it carefully instructions. Cover it with cloth in a dry place in upright position (horizon- The capacity of the room air conditioner must fit the room size for efficient and satisfactory operation. Install the room air conditioner on the shady side of your home. A window that faces north is best because it is shaded most of the day. Do not block inside airflow furniture; or outside around air conditioner with shrubs, enclosures, with blinds, curtains or or other buildings. Close the fireplace damper, floor and wall registers so cool/heated air does not escape up the chimney and into the duct work. Keep blinds and drapes in other windows closed during the sunniest part of the day. Clean the air filter as recommended Proper insulation and weather out and cool air in. in the section _Care and Cleaning." stripping in your home will help keep warm air External house shading with trees, plants or awnings air conditioner's work load. Operate heat producing appliances dishwashers during the coolest part 9 will help reduce the such as ranges, washers, dryers and of the day. Room Air Conditioner THE AIR CONDiTiONER Check Troubleshooting Guide WiLL NOT OPERATE if ... Then ... Power supply cord is disconnected Firmly push the cord into a ITvewall outlet having proper voltage. House fuse has blown or circuit breaker tripped (Page 4) Replace the fuse with a time delay type or reset the circuit breaker. (Page 4) Power is OFF. Push ON/OFF Button to turn ON. (Page 6) Temperature setting is warmer than room temperature. Set temperature Unit was turned OFF and ON too quickly. Buitt-in delay Timer shut unit OFF. Push ON/OFF Touch Pad and Remote not responding. Unit is in a locked mode. Unplug unit for 10 seconds, and then plug in again and to a lower setting. (Page 6) witl prevent compressor from turning on for 3 minutes. Button to turn unit ON. (Page 6) the controls will reset. (Page 4) Power Cord has tripped Press the RESETbutton on the plug head. (Page 4) THE AIR CONDITIONER Check BLOWS FUSES OR TRIPS CIRCUIT BREAKER if ... Then ... House fuse has blown or circuit breaker Too many electrical tripped. devices are being used on the same circuit. Replace the fuse with a time delay type or reset the circuit breaker. Unplug or relocate electrical devices being shared on same circuit. Unit is rated over 7.5 amps. Unit should be plugged Unit is plugged Do not use an extension cord to run the unit. (Page 4) into an extension cord. Unit was turned OFF and ON too quickly. THE AIR CONDITIONER Check into a single circuit outlet. Turn unit OFF and wait 3 minutes before restarting. (Page 6) TURNS ON AND OFF BY iTSELF if ... Then ... Outside temperature is extremely ENERGY SAVER feature hot. is on. THE AiR CONDITIONER Set fan speed at the fastest setting for maximum cooling. (Page 6) ENERGY SAVER feature does not circulate air continually. Set mode to COOL for constant air circulation. (Page 5) Timer turned unit ON or shut unit OFF. Check (Page 4) Push ON/OFF Button to turn unit ON or OFF. (Page 6) DOES NOT COOL THE ROOM - ICE BEHIND FRONT PANEL if ... Then ... Outside temperature is below 60°F. Set mode to FAN ONLY and fan speed to fastest setting to defrost coil. (Page 6) Filter is dirty. Open front panel. Remove filter. Rinse or vacuum filter. Replace filter. Close Panel (Page 9) BTU size is too large. A lower capacity unit may be required cooled. (Page 9) THE AIR CONDITIONER Check depending on the size of the room being DOES NOT COOL THE ROOM = NO ICE BEHIND FRONT PANEL if ... Then ... Filter is dirty. Open front panel. Remove filter. Rinse or vacuum filter. Replace filter. Close Panel (Page 9) Temperature setting is warmer than room temperature. Set temperature Room temperature Unit is not designed to cool below 60°F. is below 60°F. Front of unit is blocked by furniture, drapes, blinds, etc. to a lower setting. (Page 6) Clear away area in front of unit. Back of unit is blocked by leaves, dirt, branches, etc. Clear away back of unit. Doors, windows, registers, etc. are open. Close doors, windows, registers, etc. Unit recently turned on. Allow time to coot a larger room. Temperature sensor is touching the coil. Open front panel. Remove filter. Turn end of temperature sensor away from coil. Replace filter. Close panel. Excessive heat in the room being cooled. Use exhaust vents while cooking or bathing. Limit use of heat producing during the hottest part of the day. (Page 9) Vent control (on some models) is pulled open. Push in vent control for maximum cooling. (Page 8) (CLOSED POSITION) 10 appliances Room Air Conditioner Guide Troubleshooting (Continued) THE AiR CONDiTiONER RUNS TOO MUCH Check if ... Then ... Energy Saver is chosen. Inside blower continues operating available Current Unit replaced an older unit. for one minute to use as much cooling that is in the evaporator. Newer, higher efficiency Air Conditioner may run longer to cool the room. Total energy consumption is less due to higher efficiency. BTU size is too small. A higher capacity unit may be required depending on the size of the room being cooled. (Page 9) WATER DRiPPiNG FROM AIR CONDITIONER = iNSIDE ROOM / Check if ... Thk_ ... / Unit is not properly installed. I Unit should be mounted on a 1/4" downward slope to the outside (1/2 bubble on a I carpenter's level) to provide proper drainage. Reposition or shim cabinet as necessary. I DO NOT drill drain pan. WATER DRiPPiNG FROM AIR CONDiTiONER = OUTSIDE ROOM Check if ... Then ... Room is hot and humid. Norma operation during hot and humid days. THE REMOTE WILL NOT OPERATE AIR CONDITIONER Check if ... Then Batteries are not installed properly. Verify batteries are installed properly. (Page 5) The remote is pointed at the unit. The remote may not work properly when used at extreme angles to the front of the unit. TYPICAL AIR CONDITIONER .,. SOUNDS YOU MAY HEAR Check if ... Then ... High pitched whine or pulsating noise that cycles on and off. Compressor - Normal noise due to modern high efficiency compressors. (Page 11) Rushingair sound. Fan/Motor - Normal noise of higher efficiency fans pushing air further into the room. (Page 1 1) Pinging or swishing sounds. Condenser - Normal noise of water hitting the condenser to increase energy efficiency. (Page 1 1) Gurgling or hissing sounds. Evaporator - Normal noise of refrigerant Beeping. Electronic Control - Normal noise when electronic control settings are changed. Vibration. Unit Vibration - Due to poor wall or window construction or incorrect installation. (Page 11_ Normal Sounds passing through evaporation. (Page 1 1) High Pitched Whine Today's high efficiency Vibration compressors may have a Unit may vibrate high pitched noise because of poor wall the cooling whine during or window cycle. and make construction or incorrect installation. Sound af Rushing Air At the front of the unit, you may hear the sound of rushing air being moved by the fan. Pinging or Swishing Droplets condenser operation "pinging sounds. Gurgle/Hiss "Gurgling or hissing" noise may be heard due to refrigerant through evaporator during passing normal operation. 11 of water hitting during normal may cause or swishing" fNDICE DE CONTENIDOS Garantia ................................................................. 12 Cuidados y limpieza Acuerdo de Protecci6n Instrucciones importantes FuncionaJidades Informaci6n Garantia Cuando Experta ......................... sobre seguridad deJ acondicionador adicionaJ limitada ........ de aire... ........................................... ............................................. 13 Conseios de ahorro 14 Guia 1 5-17 Sonidos normales 18 Llame al servicio t_cnico ...................................... de soDci6n energ_tico 19 ........................... de problemas 19 .......................... 20-21 ................................................... 21 La cubierta Kenmore este producto haya sido instalado, operado y mantenido de acuerdo con las instrucciones suministradas, si falla debido a un defecto en los materiales o su construcci6n dentro del primer a_o desde la fecha de compra, llame al nOmero 1-800-4-MY-HOME ® para solicitar una reparaci6n gratuita. Si el sistema refrigerante fecha de compra, Todas las coberturas producto se utiliza Esta garantia 1. de este producto de la garantia en alg0n solamente Articulos se deteriora se aplicar6n ® para amos desde 90 dfas desde de compra yen con el uso normal, de los cinco primeros gratuita. diferente en los materiaJes que se degradan dentro soJicitar una reparaci6n s61o durante momento con otto fin prop6sito cubre defectos consumibles bombilJas 2. sellado JJame aJ nOmero 1-800-4-MY-HOME la fecha del entorno si el dom_stico. la manufactura. induyendo Ja Sears NO pagar6: pero no limitado a filtros, cintas, y bolsas. Un t_cnico de servicio para instruir al diente en la correcta instalaci6n, operaci6n o mantenimiento del producto. 3. Un t_cnico de servicio para 4. Los da_os o faJJos de este producto suministradas con el mismo. si no se instaJa, opera 5. Los da_os o faJJos de este producto resuJtado de un accidente, de aquellos para limpiar o mantener este producto. o mantiene de acuerdo a Jas instrucciones abuso, uso inadecuado o con otros fines Josque est6 dise_ado. 6. Los da_os o fallos de este producto causados pot el empleo de detergentes, Jimpiadores, quimicos o utensilios distintos de los recomendados en las instrucciones suministradas con el mismo. 7. Los da_os o faJJos en piezas o sistemas como resuJtado de modificaciones no autorizadas reaJizadas sobre este producto. Descargo de responsabiffdades Las reparaciones consideradas garantias realizadas reparaciones de comerciabiJidad de las garantias del producto o aptitud un prop6sito por la ley. Sears no podr6 consiguientes. estados y provincias imprevistos aptitud, o consiguientes, o la limitaci6n pot Joque estas exdusiones Esta garantia garantia adicionales se apJica s61o cuando Je otorga derechos que varien de un estado Sears Brands Management Sears Canada Inc., Toronto, y periuicios imprevistos de comerciabilidad en su caso. en los Estados Unidos o Canad6. usted puede a otto. Corporation, Hoffman r:states, IL 60179 Ontario, Canada MSB 2C3 o de los da_os y periuicios implicitas no set aplicables 12 ser6n implicitas, induyendo o limitaci6n de las garantias sea utilizado aunque limitada est6n Jimitadas a un a_o o el periodo de da_os la exdusi6n en la duraci6n este producto Las garantias particular, o Jimitaciones podrian de reparaciones baio esta garantia ser responsable no permiten legaJes especificos, limltaci6n por el diente como aqui se indica. para m6s corto establecido Algunos implicltas; 0nica y exdusivamente tenet adem6s otros derechos Esta o posterior Acuerdo de Protecci6n Experta Felicidades par su inteligente compra. Su nuevo producto Kenmore ® est6 dise_ado y manufacturado para proporcionarle a_os de funcianamiento de confianza. Pero coma cualquier producto, puede requerir mantenimiento preventive o reparaciones de vez en cuando. Es en estas circunstancias en los que tener un Acuerdo de Protecci6n Experta puede aharrarle castes y molestias. El Acuerdo de Protecci6n Experta tambi_n detalla Io que el Acuerdo _ incluye: [] Piezas y mane normales Servicio ni fallo t_cnlco que son genre [] para de use, no s61o defectos. consumible [] de obra necesarias Llarnadas funcional experta queda par porte en la que puede de atenci6n le ayuda mantener la vida el equipo Nuestra cobertura excluido de la cobertura: de un equipo confiar t_cnica a prolongar 6til de su nuevo producto. funcianando va a_n de la garantia protecci6n de m6s de 10.000 que conoce adecuadamente m6s all6 A continuaci6n baio se candiclones del producto. Ning6n real. t_cnicas autorizados par Sears, es decir, su producto. sin lirnite en el 6mbita national, tantas veces coma nas necesite, donde sea que nos necesite. [] Garantia "anti-ffrn6n': cambio total de su producto baja cobertura si sufre 4 o m6s folios durante dace meses consecutivos. [] Cambio [] Revlsi6n total de su producto [] Ayuda preventlva telef6nlca si este no puede de mantenlrniento r6plda -- Io Ilamamos Sears para todos [] Protecci6n cantra sobretenslones [] Protecci6n contra p_rdlda came resultado [] Reembolso [] 10% los productos. de descuento que tenga r6plda considerarnos para mec6nico sila sabre relaci6n Puede a su canveniencia soluci6n los daces de allrnentos de un fallo del alquiler ser arreglado. anual de cualquier el precio el_ctricos con los componentes de usuario el Acuerdo, una sencilla t6cnica. a cualquier hara del dia o de la noche, o concertar El Acuerdo de Protecci6n Experta garantia del producto, momenta una vez el periodo Algunas limltaclones y exduslones Ilarne al 1-800-827-6655. La cobertura Canad6 Servlcio en Canad6 Ilamada es una compra le proparcionaremas de garantia varia de un representante de en la corriente par cualquier bajo requiere o servicio alimento el6ctrica. que se estropee cobertura. m6s tiempo t6cnico del comprometido. no incluido en la cobertura instalados. Una vez que contrata Puede Ilamar par fluctuaciones cobertura reparaci6n par porte parlante". o congelador bajo extra. telef6nico anualmente refrigerador de cualquier sin cargos causados de 2505 de su producto normal -- soporte un "manual per valor reparaci6n -- telef6nica sin riesgo. Si Io cancela un reembolso expira. pueden en algunes es rode complete. Adquiera aplicarse. la que necesita par cualquier O un reembolso hay su Acuerdo Para rn6s detalles concertar una asistencia de la web. raz6n durante prorrateado de Protecci6n Para rn6s informaci6n elementas. para una cita a trav_s el periodo de en cualquier Experta! y precios en USA Ilarne a Sears al 1-800-361-6665. de instalaci6n Para una instalaci6n calentadores de Sears profesional de agua, par porte y otros articulos Esta Guia para de Uses y Cuidados su modelo. presentarse. Guarde Anate equipo. preceder en el espacio de cualquier abajo m6s f6cil instrucciones de funcionamiento todas s61o coma se indica los posibles y sentido especfficas en esta gufa. situaciones com6n durante de puertas, al 1-800-4-MY-HOME que puedan la instalaci6n, aparato. los n6meros de modela de la carcasa, o detr6s leer estos n6meros tal coma se indica aperturas USA o Canad6 y de Serie de su aparato provisto en el exterior Le resultar6 reflejar de Modelo electrodom_sticos, Ilame desde de aire con precauci6n y mantenimiento los n_meros de la carcasa proporciona no pretenden Debe est6 Iocalizada del hagar, Use el acondicionador Estas instrucciones operaci6n de Sears de aparatos impartantes en "Cuidados N ° de Serie: Fecha de compra: 13 en la porte si usa una linterna y limpieza". N ° de Modelo: y de serie. La placa del filtro de serie inferior o si extrae del el frontal ®. Lea todas Instrucciones importantes Jas instrucciones antes de usar este acondicionador de aire. Per su segurldad sabreseguridad No almacene gasolina ni otros liquidos o vapores otro aparato advertencias. inflamables alrededor de este u el6ctrico. Lea las etiquetas del producto sabre inflamabitidad y otras El cable de corriente provisto con este aparato cortacorriente de incendio. Prevenga contiene un dispositivo dise_ado para reducir et riesgo Para reducir el riesgo de incendio, choque el6ctrico o lesiones al operar su aparato de aire acondicionado, siga unas instrucciones basicas entre las que se encuentran: Aseg0rese de que la instalaci6n el6ctrica es adecuada para el modelo que ha etegido. Par favor, consulte la secci6n 'Qperaci6n del dispositivo cortacorriente' detalles. accldentes para obtener m6s Esta informaci6n puede encontrarse lateral de la carcasa. en la placa de serie, que esta Iocalizada en el En caso de que el cable provisto resulte Si eJ aparato daBado, no podr6 set reparado. Deber6 set reemplazado par un cable del fabricante. necesitar6 limpiar antes ambas caras del cristal. Si ta ventana es de triple rail con un panel apantallado, remueva 6ste completamente antes de realizar la instalaci6n. de aire acondicionado Aseg0rese de que el aparato o choque " Evite el riesgo el6ctrico. un adaptador No remueva ni la hora de remover o reinstalar de tomacorrientes. ninguna clavija de aire acondicionado Cuando manipule el aparato ha sido instalado firme y del enchufe. el equipo. de aire acondicionado, producirse cortes con las aletas metalicas afitadas Tomacorrientes probablemente correctamente de acuerdo a las instrucciones de montaje provistas con este manual. Guarde este manual y las instrucciones de montaje para un posibte usa en el futuro a de incendio No use un alargador va a set instalado en una ventana, tenga cuidado para evitar de la parte delantera y trasera. poJarizado Informaci6n el6ctrlca Las especificaciones estan expresadas el6ctricas comptetas de su nuevo aparato de aire acondicionado en la ptaca de serie. Consulte estas especificaciones cuando chequee los requisitos el6ctricos. AsegOrese de que el aparato conectado a tierra. adecuadamente polarizado. Si et tomacorrientes que pretende utitizar no est6 adecuadamente polarizado o protegido par un fusible retardante o cortacorrientes, consiga que un electricista cualificado le instale un tomacorrientes adecuado. Cable de carriente No ponga en marcha et aparato palarizada de 3 daviias y dispasitiva cortacorriente. * LEA ESTA SECCION queda adecuadamente importante una polarizaci6n adecuada. Et cane de corriente est6 equipado con un enchufe potarizado de tres davijas para protecci6n contra choques el6ctricos. Su aparato de aire acondicionado debe conectarse a un tomacorrientes * can enchufe de aire acondicionado Para minimizar el riesgo de choque el6ctrico e incendio es ANTES de aire acondicionado sin la cubierta protectora exterior en su sitio. Esto podria provocar da_os mec@icos en el interior del aparato. No utilice o adaptador DE INTENTAR un cable alargador PONER de tomacorrien_es. EN FUNCIONAMIENTO EL APARATO DE AIRE ACONDICIONADO. La unidad debe quedar instaJada una hora antes de operarJa. Operaci6n del dispositivo cortacorriente El cable cable. de corriente Para al tomacorrientes y presione RESET un dispositivo su cable 1. Enchufe el aparato 2. El cable de corriente tiene un sonido al tiempo Percibir6 Con6ctelo contiene comprobar 3. Presione el bot6n de aire cortacorriente de corriente haga que detecta daBos en el Io siguiente: acondicionado. DOS botones en el enchufe. que et bot6n RESET. De nuevo Presione RESET sale hacia percibir6 un sonido el bot6n TEST. fuera. al encajar el bot6n en su lugar. 4. El cable de corriente (En algunos estar6 productos en este momenta esto se indica suministrando adem6s con un pitoto electricidad a la unidad. en el enchufe) ATENCION: * No use este dispositivo . AsegOrese siempre para encender de que el bot6n y apagar la unidad. RESET est6 presionado antes de operar el aparato. " El cable de alimentaci6n debe bot6n RESETEO, o si no puede nuevo contactando " Si el cable reemplazado 1-800-4-MY- con Sears de alimentaci6n par uno nuevo HOME ®. 14 ser reemplazado resetearse en el nOmero resulta daBado, proporcionado si no se puede en absotuto. Puede 1-800-4-MY-HOME resetear obtener pulsando un cable ®. NO PODRJk ser reparado. par Sears en el n0mero DEBE ser el Funcionalidades del acondicionador CONTROL ELECTRONICO Antes de comenzar0 familiaricese con todas sus funciones, set controlada tanto completamente con el panel de control y el control remoto y despu@s toque los simbolos en el panel t6ctil para que se muestran usar las funciones deseadas. a continuad6n La unidad y puede desde el panel de control t6ctil como desde el control remoto. AJUSTA LA MUESTRA LA TEMPERATURA TEMPERATURA/EL TIEMPO 0 EL TIEMPO INDICADOR DE CALOR (en algunos modelos) SELECCIONA LA ESTABLECE EL MODO VELOCIDAD DEL VENTILADOR RECEPTOR DE INFRARROJOS DEL ................................. CONTROL REMOTO BOTON DE MODO DORMtR RESETEO DEL FILTRO ACTIVA EL ENCtENDE O TEMPORIZADOR APAGA LA UNtDAD PANEL TACTIL CONTROL REMOTO PARA CAMBIAR LA BATERJA PESTANA ACTIVA EL TEMPORIZADOR MODO CALOR (en atgunos SELECCIONA VELOCIDAD modeIos) LA DEL VENTILADOR AJUSTA LA TEMPERATURA Y EL TIEMPO Tipo de bateria VENTILADOR AUTOM_,TICO : CR2025 MODO DORMIR Voltee el control remoto. la bandeja el lado POSITIVO diagrama. 15 Apriete de la bateria. ("+") Reinserte la pesta_a Coloque y tire para extraer la bateria en la bandeja hacia ARRIBA, de acuerdo la bandeja de la bateria. al con Funcionalidades Nota: Las siguientes aplicarse del acondicionador instruccianes describen {co,tlnuoci6,) el panel de control t6ctil. Las mismas instruccianes pueden al control remoto. Para encender Para establecer Para cambiar Para ajustar o apagar la unidad el modo "Cool" la configuraci6n la velocidad BAJO Para usar la funci6n seleccione AUTO: presione el bot6n ENCENDIDO/APAGADO (frio), presione el bot6n MODE de temperatura, del ventilador use las flechas Arriba autom_tico presione el bot6n " Velocidad comienza segOn vaya habitaci6n. una puerta, m6s baia. Para operar en modo " $61o Ventilador", retornando " y seleccione: de la habitaci6n cambiar6 y se va aiustando a velocidades Io suficiente, sube r6pidamente, a la m6xima " y la temperatura de la permanecer6 par eiemplo velocidad. despu_s hasta la m6s baia La velocidad al abrir del segOn la temperatura de al valor establecido. para seleccionarlo: para circular Puede usar la velocidad se mostrar6 del Ventilador mantener no se calienta presione el bot6n MODO Use la funci6n s61o ventilador la temperatura. para Si la temperatura se ir6 reaiustando vaya velocidad si la habitaci6n autom6ticamente la habitaci6n en alta siendo necesario Pot eiemplo, a la velocidad ventilador del Ventilador ALTO Nora: El ventilador inferiores para seleccionarlo: y Abajo como sea necesario: presione el bot6n " Velocidad MEDIO de ventilador (modo) _) : que prefiera en la pantalla. 16 el aire de la habitaci6n sin acondicionar para ello y la temperatura real Funcionalidades del acondicionador (continuaci6n) Para usar el modo " Ahorro de Energia " presione el bot6n MODO Ahorrar6 energia usando el aparato una vez que la habitaci6n para seleccionarlo: en este modo. El compresor est_ a la temperatura del aire set6 comprobada durante seleccionada. 20 segundos cada 10 minutos hasta que se eleve por encima de Ja selecci6n, momento en el cual el compresor funcionar. El proceso completo Para usar la funci6n "Dormir se repetir6 " presione el bot6n DORMIR La temperatura seleccionada configuraci6n Para usar la funci6n '"remporizador" se incrementar6 a de nuevo otros 2° F pasados otros en este estado durante 7 horas, y despu@s volver6 a la original. presione el bot6n "rEMPORIZADOR 24 horas. El control modificar6 y el testigo LED se iluminar_: el tiempo deseado la temperatura, despu@s las flechas ARRIBA/ABAJO. presione el bot6n MODO a mostrar la cuenta atr6s. Esta funci6n puede cancelarse en cualquier Una vez que la funci6n de temporizador descritos deber6n finalice, todos los pasos arriba repetirse para asL NOTA: El bot6n "Temporizador" est6 apagado. y Despu@s, pasados 5 segundos, la pantalla momento pulsando el bot6n TEMPORIZADOR. que vuelva a funcionar hasta el tiempo para la cuenta atr6s en incrementos de 1 6 0.5 horas. Si necesita cambiar funciona tanto si el equipo est6 encendido Cuando est@ encendido, el tiempo seleccionado que la unidad se apague. se encienda. Funci6n de comprobaci6n volver6n en 2° F 30 minutos despu@s de a incrementar Presione las flechas ARRIBA y ABAJO para seleccionar volver6 y el ventilador entonces. y el testigo LED se iluminar_: seleccionar esta funci6n. Se volver6 30 minutos. Permanecer6 y el motor se apagar6n Despu@s la temperatura Cuando est_ apagado, como si set6 el tiempo hasta ser6 el tiempo hasta que la unidad del filtro: Tras 250 horas de funcionamiento, encender6. mantener Es un recordatorio la unidad funcionando el indicador para limpiar LED de " Reseteo del Filtro" se el filtro alojado eficientemente. FILTRO durante 3 segundos este recordatorio tras el panel frontal AI presionar se resetear6 y asi el bot6n RESETEO DEL y el LED se apagar6. Funci6n calor (en algunos modelos): Esta funci6n puede usarse con cualquier con los modos "Temporizador)" ventilador funcionar6 se mantendr6 de velocidad y " Dormir". Cuando se establece continuamente autom6ticamente combinaci6n de VENTILADOR, y el modo "Calor", el mientras sea necesario calentar m6s. La temperatura en alg6n punto entre 55 ° F (13 ° C) y 80 ° F (27 ° C). Cuando la temperatura seleccionada se alcance, el ventilador se apagar6 intermitentemente para mover el aire y comprobar Ja temperatura. Nota: Cuando la unidad se apague funcionando estando en modo calor, el ventilador y encender6 continuar6 durante unos segundos para disipar el calor residual del interior de la unidad. 17 INFORMACI6N ADICIONAL Ahora las funciones que entiende que deber[a familiarizarse. El circuito de frio tiene r_pidamente. QUE DEBE CONOCER de b_sicas un retardo Esto evita de funcionamiento, autom6tico el sobrecalentamiento de inicio le presentamos par 3 minutos del compresor si la unidad y el posible ventilador continuar6 funcionando durante este tiempo. Existe un retardo de 2 segundas hasta que el compresor se apaga VENTILADOR!CALOR. de que se haya El control Esto es para mantendr6 la temperatura 55 ° F y 80 ° F (en modo El panel control una medida cubrir la pasibilidad en un margen de 2 grados m_s capacidades se apaga de control y vuelve con las a encender salto del diferencial/cortacorrientes. cuando selecciona seleccionado Fahrenheit, entre la funci6n El SOLO s61o de paso hacia 60 ° F y 90 ° F (en modo otro modo. fr_o), y entre calor). es capaz de mostrar a otra, mantenga la informaci6n presionados de temperatura los botones de las flechas en grados Arriba (A) Fahrenheit y Abajo o Celsius. Para (v) cambiar simult6neamente de durante 3 segundos. CODIGOS DE ERROR: Si la pantalla solicitar muestra "HS", "ES" o "AS", hay un fallo en un sensor. Contacte con el nOmero 1-800-4-MY-HOME® para la reparaci6n. Sensor de calor REINIClO AUTOMATICO: En caso de un apag6n autom6ticamente el_ctrico, CONTROL DEL RESPIRADERO 1. Pulsado hacia dentro 2. Parcialrnente 3. Totalmente introduce la unidad una vez que la energfa (Fig.1) hacia fuera hacia fuera Sensor de temperatura de evaporaci6n del aire la Oltima configuraci6n - Recicla establecida y volver_ a ese estado sea reestablecida. ( En el modeto 253.79184 (Fig.2) (Fig.3) recordar_ Sensor de la babina el aire - Introduce - Saca el aire ) de la habitaci6n. aire fresco en la habitaci6n. de la habitaci6n e aire fresco. Figura Figura 1 (RESPIRADERO Figura 2 (RESPIRADERO ABIERTO) 3 (RESHRADERO ESCAPE ABIERTOS) 18 CERRADO) Y PALAS Palas de dlrecclonamlento Las palas de dTreccTonamTento Su acondTcTonador Las palas hacia det aTre controlan tTene el sTstema direccTonal permTten Puede segOn sea necesarTo. la dTreccT6n deseada horTzontales con los dedos configurar la dTrecd6n det flujo de aire. de 4 v[as descrTto a contTnuaci6n. dTrTgTr et flujo de aTre a la habTtacT6n hacTa arrTba la TzquTerda o la derecha conseguTr RUEDECILLAS SINFIN del aire un total hacia hasta la TzquTerda o ta derecha. conseguTr dTferentes para y hasta PTvote las palas la dTreccT6n deseada de 4 orTentaciones o abajo GTre las ruedecTllas hacTa arrTba el ftujo o abajo. de aTre con este sistema. Cuidados y limpieza LTmpTe de tanto en tanto su aparato mantenga nuevo. AsegOrese antes como de limpiarlo Lirnpieza Et fittro para evitar del filtro de aTre acondTcTonado de desconectar incendios de forma el equipo y choques que se de la corriente el_ctricos. de aire de aTre debe ser revTsado al menos una vez al mes por sT acaso es necesarTo ITmpTarlo. Las partfculas atrapadas en et filtro en el cTrcuTto refrTgerante, * En los modelos con control posTcT6n de respTradero " Abra el panel Sujete " por * de agua de desconectar Ifquido AsegOrese en la mTnucTosamente. de que el fittro Sacuda est6 a colocar. ITmpTar el fittro el equTpo el6ctrTcos. suave. con una aspTradora. con un paso duros, El exceso nT cera de ITmpTarlo para pueden humedecTdo sacudTrse en una soluci6n evTtar con un de agua tTbTa y seque. o pulTdores de agua de agua antes y el frontal cuidadosamente de escurrTr el exceso los controles. de la corrTente La carcasa Adare utTtTce ITmpTadores AsegOrese da_os del aTre y hacTa fuera. tTbTa. Acl6relo det filtro. puede sTn aceTtes o lavarse y jab6n Nunca _ste presTonado de 61 hacTa arrTba de volverlo a lavarlo, TncendTos y choques • normal en el mTsmo. de la carcasa Aseg0rese paso el flujo de escarcha mantenga IfquTdo y agua seco antes alternatTva Limpieza respTradero, y fire jab6n el exceso completamente Como y bloquear cerrado. el centro Lave el fTItro usando ° de apTtarse una acumulacT6n frontal. el fittro con cuTdado pueden causando en el frontal det paso en los controles antes de de la carcasa. ITmpTar alrededor o su alrededor puede de causar al aparato. Conecte el aparato de aTre acondTcTonado a la corrTente. AImacenamiento en invierno ST tTene pensado cuTdado tela guardar de la ventana o devu_lvalo a su embalaje NOTA: Almacene normal Conseios de ahorro energ tico Instale el aparato parte eficTente al norte debe ser adecuada para la estancTa y satTsfactorTa. en el lado es mejor de su casa ya que queda donde no pegue a la sombra et la mayor det d[a. No btoquee cortTnas CTerre et flujo o muebtes; TnterTor de aTre alrededor nT en el exterTor la compuerta paredes de modo ventTlacT6n nT por y persTanas del aTre como Un aTstamTento adecuado a la sombra del aparato Use los aparatos secadoras las rejitlas con persTanas, edTficTos. de ventTtacT6n no se escape se recomTenda por de suelos los conductos 19 y el frfo que durante ventanas cerradas en la seccT6n "CuTdados en puertas de 6rboles, de aire el6ctrTcos y lavadoras de las dem6s y burletes el aTre c61Tdo fuera la casa de trabajo asf como o caITente nT otros y de la chTmenea. LTmpTe et fittro a mantener del acondTcTonador con setos, cercas de la chTmenea, que el aTre frfo Mantenga las cortTnas m6s soteada det d[a. Tener con con una de aire en un lugar seco y en la posici6n de aTre acondTcTonado que encare C0bralo con la base hacia abajo). de aTre acondTcTonado una operaci6n sol. Una ventana et TnvTerno, quftelo orTgTnal. (horizontal det aparato conseguir de aTre durante a las TnstruccTones de Tnstalaci6n. el acondicionador hacia arriba La capacTdad para et acondTcTonador de acuerdo y ventanas durante y ITmpTeza". de su hogar ayudar6n dentro. ptantas o toldos contrTbuye a reducir acondTcionado. produzcan la hora la hora calor tales m6s fresca como del d[a. estufas, lavaplatos, la carga Guia de resoluci6n de problemas de aire para habitaciones EL ACONDICIONADOR del acondicionador NO FUNCIONA Compruebe si ... En ese caso ... El cable de alimentaci6n est6 desconectado. Conecte firrnemente el enchufe en un tomacorriente Los fusibles se han fundido o el diferencial/cortacorriente dom_stica ha saltado. de la instalaci6n El equipo estR apagado. La temperatura Reemplace el fusible fundido por uno de retardo o reestablezca (PRgina 14) Pulse el bot6n ENCENDIDO/APAGADO establecida es mrs cRlida que la de la habitaci6n. del voltaje adecuado. (PRgina 14) Establezca la ternperatura el diferencial/cortacorriente. para encenderlo. (PRgina 16) a un valor menor. (PRgina 16) La unidad se apag6 y encendi6 demasiado deprisa. El retardo integrado evita que el compresor se encienda durante 3 minutos. El temporizador Pulse el bot6n ENCENDIDO/APAGADO apag6 la unidad. para encenderlo. (PRgina 16) No responden ni el panel tRctil ni el control remoto. La unidad estR bloqueada. Descon_ctela de la red el_ctrica durante 10 segundos, enchOfela de nuevo y los controles se resetearRn. (PRgina 14) El cortacorriente Presione el bot6n RESETEOdel cabezal del cable de alimentaci6n. (PRgina 14) del cable de alimentaci6n ha saltado. ELACONDICIONADOR DEAIREPROVOCA QUELOSFUSIBLES SEFUNDAN0 ELDIFERENCIALES/CORTACORRIENTES SALTEN Compruebe si ... En ese caso Los fusibles se han fundido o el diferencial/cortacorriente dom_stica ha saltado. de la instalaci6n ... Reemplace el fusible fundido por uno de retardo o reestablezca el diferencial/cortacorriente. (PRgina 14) Se estRn usando demasiados dispositivos el_ctricos en el mismo circuito. Desenchufe o recoloque algunos dispositivos que compartan el mismo circuito. El equipo estR tasado por encima de 7,5 amperios. El equipo deberfa estar conectado a un enchufe de circuito Onico. La unidad estR enchufada con un alargador. No use un alargador La unidad se apag6 y encendi6 demasiado deprisa. ApRguela y espere 3 minutos antes de volver a encenderla. (PRgina 16) EL ACONDICIONADOR SE ENClENDE Y APAGA Compruebe si ... La temperatura exterior es extrernadamente SOLO En ese caso caliente. para conectar la unidad. (PRgina 14) ... Establezca la velocidad (PRgina 16) del ventilador al mRximo para conseguir la mRxima refrigeraci6n. La funci6n AHORRO DE ENERGiA estR activada. La funci6n ENERGY SAVER no hace circular el aire continuamente. Seleccione el modo FR[O para conseguir una circulaci6n de aire constante. (PRgina 15) El temporizador Presione el bot6n ENCENDIDO/APAGADO encendi6 o apag6 la unidad. EL ACONDICIONADOR para encender o apagar la unidad. (PRgina 16) DE AIRE NO ENFRiA LA HABITACION - HAY HIELO TRAS EL PANEL FRONTAL Compruebe si ... En ese caso ... La temperatura Establezca el modo SOLO VENTILADOR y la velocidad el circuito. (PRgina 16) exterior estR por debajo de 60 o F. del ventilador al mRximo para descongelar El filtro estR sucio. Abra el panel frontal. Saque el filtro. Aclare el filtro o Ifrnpielo con una aspiradora. filtro. Cierre el panel. (PRgina 19) La capacidad Podrfa ser necesaria una unidad de rnenor capacidad a enfriar. (PRgina 19) de BTU es demasiado grande. dependiendo Recoloque el del tama_o de la habitaci6n ELACONDICIONADOR DE AIRE NO ENFRIA LA HABffACI6N - NO HAY HIELO TRAS ELPANEL FRONTAL Compruebe si ... En ese caso El filtro estR sucio. ... Abra el panel frontal. Saque el filtro. Aclare el filtro o limpielo con una aspiradora. filtro. Cierre el panel. (PRgina 19) La temperatura establecida es mrs cRlida que la de la habitaci6n. La temperatura exterior estR por debajo de 60 o F. Establezca la ternperatura a un valor menor. (PRgina 16) La unidad no estR dise_ada para enfriar por debajo de 60 o F. El frontal de la unidad queda bloqueado por muebles, cortinas, )ersianas... etc. Despeje el Rrea de delante del frontal de la unidad. La parte trasera de la unidad queda bloqueada ramas.., etc. Despeje la parte trasera de la unidad. por hojas, polvo, Hay alguna puerta, ventana, ventilaci6n.., etc abierta. Cierre puertas, ventanas, ventilaciones.., etc. La unidad acaba de encenderse. Perrnita un cierto tiempo para enfriar una habitaci6n grande. El sensor de ternperatura Abra el panel frontal. Saque el filtro. Quite el extremo del sensor de temperatura refrigeraci6n. Recoloque el filtro. Cierre el panel. estR en contacto con el circuito de refrigeraci6n. Hay demasiado calor en la habitaci6n a enfriar. Abra los respiraderos si estR cocinando o tomando un ba_o. Limite el uso aparatos generen calor durante el tiempo mrs caluroso del dia. (PRgina 19) El control del respiradero hacia fuera, Presione el control del respiradero mRximo. (PRgina 18) (en algunos modelos) estR en posici6n abierta Recoloque el 2O del circuito de dom_sticos que a LA POSICIC)N DE CERRADO para conseguir un enfriamiento Guia de resoluci6n de problemas del acondicionador de °ire par° habit°clones (Continuaci6n) EL ACONDICIONADOR Compruebe DE AIRE FUNCIONA DEMASiADO si ... En ese caso ... El rnodo de Ahorro de Energfa est6 seleccionado. El ventilador interno continOa funcionando durante un rninuto para aprovechar al rn6xirno el fifo acurnulado en el evaporador. Ha reernplazado un equipo rn6s viejo. Los acondicionadores de aire nuevos de alta eficiencia pueden funcionar rn6s para enfriar la habitaci6n. El consurno total de energfa es rnenor debido a su alta eficiencia. La capacidad Podrfa ser necesaria una unidad de mayor capacidad a enfriar. (P6gina 19) de BTU es dernasiado pequefia. GOTEA AGUA DELACONDICIONADOR dependiendo del tarnafio de la habitaci6n DE AIRE =DENTRO DE LA HABITACION Compruebe si ... IEn ese caso ... La unidad no ha sido adecuadarnente instalada. La unidad debe rnontarse con una inclinaci6n de 1/4" hacia abajo y hacia el exterior (1/2 burbuja l en un nivel de carpintero) para proporcionar el drenaje adecuado. Reposicione o calce la carcasa corno sea necesario. NUNCA taladre GOTEA AGUA DELACONDICIONADOR un agujero de drenaje. DE AIRE - EN ELEXTERIOR DE LA HABITACION t Eoesecoso,., Compruebe si caliente ... La habitaci6n est6 y hOrneda. Esun funcionamiento normal durante los d[as rods cdlidos y hOrnedos. EL CONTROL REMOTO NO OPERA EL ACONDICIONADOR DE AIRE Compruebe si ... En ese caso ... La baterfa no est6 instalada adecuadarnente. Verifique E control rernoto °punt° a la unidad, respectoEI control arern°t°frontaP°drfade a nOunidad.funcionar adecuadarnente que la baterfa est6 correctarnente instalada. (P6gina 15) SONIDOS TIPICOS QUE PUEDE OIR EN SU ACONDICIONADOR cuando se usa en 6ngulos rnuy arnplios con DE AIRE Compruebe si ... En ese caso ... Silbidos agudos y ruidos de vibraci6n que van y vienen. Cornpresor - Ruido normal en los cornpresores de alta eficiencia rnodernos. (P6gina 21 ) ;onido de r6fagas de aire. Ventilador/Motor - Ruido normal en los ventiladores fondo en la habitaci6n. (P6gina 21) Sonido de goteo o chapoteo. ;onido de borboteo de alta eficiencia cuando inyectan aire a Condensador - Ruido normal de agua entrando en el condensador para aurnentar la eficiencia energ_tica. (P_gina 21) o pitido. Evaporador - Ruido normal del refrigerante pasando por la fase de evaporaci6n. (P6gina 21 ) Pitidos. Control electr6nico - Ruido normal cuando se carnbian configuraciones en el control electr6nico. Vibraci6n. Vibraci6n de la unidad - Debido a una pobre construcci6n de la ventana o una instalaci6n incorrecta. (P6gina 21 Sonidos norrnaies Chirridos agudos Los compresores efectividad pueden agudo Vibraci6n de alta de hoy en dia producir durante un chirrido el ciclo de enfriado. La unidad puede vibrar hacer ruido debido estructura y a una d@bil de la pared o la ventana, o a una instalaci6n incorrecta. Sonido de r6fagas Delante de °ire de la unidad, puede ofr el sonido de r6fagas °ire que son movidas de par el ventilador. Goteo o chapoteo Las gotas de agua que el condensador durante Borboteo/Siseo Un sonido parecido un "borboteo ° siseo" escucharse debido pasando a trav@s durante una normal al refrigerante evaporador operaci6n. 21 operaci6n pueden sonidos de "goteo puede del la normal del producto a produdr o chapoteo". Your Home For troubleshooting, product manuals and expert advice: www.managemylife.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME Call anytime, ® (1-800-469-4663) day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call anytime for the location of your nearest Sears Parts & Repair Service 1-800-488-1222 (U.S.A.) www.sears.com To purchase a protection agreement 1-800-827-6655 (U.S.A.) Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: 1-888-SU-HOGAR (1-888-784-6427) www.sears.com TM ® Center 1-800-469-4663 (Canada) www.sears.ca on a product serviced by Sears: 1-800-361-6665 (Canada) Au Canada pour service en frangais: 1-800-LE-FOYER Mc (1-800-533-6937) www. se a rs. ca ® Registered Trademark / Trademark of KCD IP, LLC in the United States, or Sears Brands, LLC in other countries ® Marca Registrada / TMMarca de F_brica de KCD IP, LLC en Estados Unidos, o Sears Brands, LLC in otros paises MCMarque de commerce / MDMarque d6pos6e de Sears Brands, LLC
advertisement