advertisement
TABLE OF CONTENTS
Table of Contents
Congratulations
.....................................
:................. •.... 3
Customer Record ....................................................
... 3
Care and Cleaning ....................................................
3
Specifications .............................................................
3
Installation ....................................................................
4
Television Location ....................................................
4
Optional Cable Connections ......................................
4
AC Power Supply Cord ..............................................
4
Cable / Antenna .........................................................
4
Cable Connection ......................................................
4
Antenna Connection ..................................................
5
Optional Equipment Connections ...............................
5
To Audio Amplifier......................................................
6
Audio Adjustments .....................................................
6
Main Menu .....................................................................
6
ACTION Button ..........................................................
6
CH / VOL Buttons.......................................................
6
Picture In Picture (PIP) Operation ...............................
7
PiP Operation with a VCR and Cable Box ................. 7
PIP Operation with a VCR - No Cable Box ................ 8
Main Menu Feature Chart ............................................
9
Special Features .........................................................
11
Languages ...............................................................
11
Timer ............... :........................................................
11
Sleep Timer ..............................................................
11
Program Timer .........................................................
12
CH CAP (Channel Caption) .....................................
13
LOCK .......................................................................
13
Game Guard Lock....................................................
13
Unlocking Game Guard ............................................
14
Troubleshooting
Chart ...............................................
15
Safety Instructions
WARNING
WARNING:
To reduce the risk of electric shock do not remove cover or back. I
No user-serviceable parts inside. Refer servicing to qualified sewice personnel.
head within a friangle is
intended
to tell
the
user that
The exclamation point within tdangle is intended to tell the user that important operating and servicing instructions are in
the papers with the appliance.
risk of electric shock to persons.
WARNING:
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
El
CONGRA TULA TIONS
ongratulations
'Your new TV features a solid state chassis that is designed to give you many
years of enjoyment.
It was thoroughly tested and tuned at the factory for
best performance.
_ust:amer
Record
The model and serial number of this product are located on the back of the
TV. You should note the model and serial number in the space provided and retain as a permanent record of your purchase. This will aid in identification in the event of theft or loss.
Product registration is available at www.prodreg.condpanasonic.
Model
Number
Serial
Number
_are and Cleaning
Screen (Turn TV Off)
•
•
Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE ABRASIVE CLEANERS.
Avoid excessive moisture and wipe dry.
Cabinet and Remote Control
•
•
Use a soft cloth dampened with water or a mild detergent solution.
Do not use benzene, thinner, or other petroleum based cleaners.
Avoid excessive moisture and wipe dry.
;pecifications
Power Source
CT-27G23
CT-35G23
CT-2769S
CT-32G23
CT-36G23
CT-3269S
Channel Capability181
Video Input Jacks
Audio Input Jacks
To Audio AMP Jack
S-VHS Input Jack
(some models)
120V AC, 60Hz
VHF-12; UHF-56; Cable 113
1Vp.p,75 Ohm, Phono Jack Type
500mY I_Ms 47K Ohm
O-2,0V RMS 4.7K Ohm
S-Video (Y-C) Connectoi
Specifications are subject to change without notice or obligation. m
INSTALLA TION
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment
center. Consult your dealer for available options.
13 Avoid excessive sunlight or bright lights, including reflections.
13 Keep away from excessive heat or moisture, Inadequate ven-_ilation
may cause internal component failure.
13
Fluorescent lighting may reduce Remote Control transmitting range.
£3 Avoid magnetic equipment, including motors, fans, or external speakers.
Optional
Cable Connections
Shielded audio and video cables should be used between components. For
best results:
O
Use 75-ohm coaxial shielded cables.
13
Check type of output and input connectors on your components.
13 Determine required cable lengths.
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT OF AC
OUTLET AND FULLY INSERT.
DO NOT USE A PLUG
WITH A RECEPTACLE OR OTHER OUTLET UNLESS
Polarized plug
THE BLADE CAN BE FULLY INSERTED TO PREVENT BLADE
EXPOSURE.
FOR SOME MODELS THAT ARE NON-POLARIZED, THE
USE OF AN AC ADAPTOR CONNECTOR MAY BE NECESSARY.
Remote Control
The Remote Control Quick Reference Guide is located within the package
provided with this "IV.
Cable / Antenna
For proper reception, either a cable or antenna connection is required.
Cable Connection
Connect the cable supplied by your local cable company.
Note: A cab/e converter box
may
be
required for proper reception. Check
with your local Cable company for
compatibility requirements.
Incoming Cable from
Cable Company
75 Ohm VHF/UHF on back of TV
ml
Antenna
INSTALLATION
•
•
Connection
For proper reception of VHF/UHF Incoming Cable from channels, an external antenna is HomeAntenna
_
required.
For best reception an I_ outdoor antenna is recommended.
Antenna Mode must be set to TV.
I_; I_/1
_l'° :_
Cable Hreset
JC _ at the factory. Antenna
I users must change to Antenna Mode in the Set
Up Menu.
Optional Equipment Connections
VCR's, video disc players,TV game consoles, and DSS equipment can also be
connected to the video inputs. See the optional equipment manual for details.
(Some models have only one video input and some models have an S-Video input.)
TERMINALS ON BACK OF TV VCR l'_l_l (may vary)
....
r
......._
II
;I I
I --
?
h _-VlI_O OUT --
,I_ I
I
O @
_o,o
_
h Iv,_,oo_
--
"n
_..o
I;'0
_"_='
'
i
L
I/
,I I,-I
'_
"_
,uo.,
I, ,'ff-u_oJ o_uTn
;L__lp.@@@.. -_-o.
,/L,o,o_o '--'-"'°'
e ,
I, _.....
"
"'
,J
Procedure
Note:
1.
Connect equipment as shown to rear AudioNideo input jacks,
2.
Select the Video mode by pressing TVNIDEO button.
3.
Operate optional equipment as instructed in equipment manual.
The S-VIDEO connection is optional and overrides other VIDEO connections.
la
MAIN MENU
TO AUDIO AMPlifier
Connect to an external audio amplifier input for listening to a stereo system.
Note: Do not conner TO AUDIO AMP terminally, external speakers. directly to
Audio Adjustments
1.
Press TV SPEAKERS ON button located in the back of Lthe TV or select TV SPEAKERS ON located in the AUDIO menu on screen.
2.
Set amplifier volume to minimum.
3.
Adjust TV volume to desired level.
4.
Adjust amplifier volume to match the TV.
5.
Press TV Speakers OFF button on the back of the TV or
OFF&VAO from AUDIO menu.
6.
Volume and mute are now controlled from the TV.
Note:
In OFF&FAO
the
volume
is
controlled
by the
external amplifier.
Main Menu
Main Menu
|=t3H
ACTION Button
Press the ACTION button to display the Main Menu and Sub Menus.
Press the ACTION button repeatedly to exit.
OH / VOL Buttons
Press the CH (channel) or.VOL (volume) buttons to select an icon. Use the
OH buttons to highlight the desired features.
Use VOL buttons to select and adjust features.
Remote Navigation Buttons
4
&
V
n
PICTURE
Picture In Picture (PIP) Operation
IN PICTURE
(PIP)
OPERATION
siP Operation
With a VCR and Cable Box
,
This television includes a Picture In Picture (PIP) feature.
A second video source (VCR, Camcorder, etc,) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
(Some models have only one video input and some models have an S-VIDEO video input.) r--
....
TERMINALS ON BACK OF "IV
(m_ayv._ar_)
,€
(
(
-"@ @ @ .'-m,
2
_
--INPUT
TO AUDIO
"AMP
Incoming
Cable
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note:
The Remote Control must be programmed with supplied codes to operate the VCR and Cable Box.
See Programming the Remote
Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
•
Press the W/VIDEO button on the Remote Control to select
the video PIP source.
•
Note:
•
Verify the CABLE BOX and VCR are ON and the VCR
tuned to channel 3.
Choose channels for the PIP frame by pressing the CABLE
button on the Remote Control and using the numeric keypad
or CH up/clown buttons.
Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH up/down buttons.
The SWAP
button switches the PIP and Main
Picture source. Press the RECALL button for PIP and Main Picture source status, on screen.
IB
PICTURE IN PICTURE
(PIP)
OPERATION
PIP Operation with a VCR - No Cable Box
This television includes a Picture In Picture (PIP) feature.
A second video source (VCR) is required to provide a second picture.
Connect yourtelevision to a VCR, as shown.
(Some models have only one video input and some models have an S-VIDEO input.).
I
I
I
II A
Incomil_g
Cable
@
I
I
CABLES NOT SUPPLIED
Note:
Procedure
The Remote Control must be programmed with the supplied codes to operate the VCR. See Programming the Remote Control in the
Remote Control Quick Reference Guide.
Turn the VCR OFF and tune the TV to channel 3.
Press the PIP button on the Remote Control to display the PIP frame on screen.
•
•
Note:
•
•
•
The PIf5 picture is the same as the Main picture, initially.
Press the TV/VIDEO button on the Remote Control to select
the VIDEO PIP source.
Press the VCR button on the Remote Control and turn ON the VCR.
Press the TM/MCR button on the Remote Control.
Choose channels
for
PIP
frame by
pressing VCR
CHANNEL up/down buttons on the Remote Control.
Choose channels for the Main Picture by pressing the TM button on the Remote Control and using the numeric keypad or CH up/down buttons.
The
SWAP button switches the PIP and Main
Picture source, Press the RECALL button for PIP
and Main Picture source status, on screen.
E1
MAIN MENU FEATURE CHART
Main Menu Feature Chart
SET TIME
ANT
AUTO PROG
MANUAL PROG
AUTO POWER ON
CC MODE
LANGUAGES
GEOMAGNETIC CORR
(some models) i:
SET UP
When entered, TIME will display on screen after pressing
POWER button, RECALL button, or changing channels.
Choose CABLE or TV to match the signal at your antenna input.
Automatically program channels with a signal into memory.
Manually add or delete channels from memory.
Automatically turn TV POWER on when AC power is applied.
Select CC for Closed Captioning display.
Select OFF to display closed captioning when MUTE button is pressed.
Select English, Spanish, or French menu.
Adjustment may be required for geomagnetic fields in the area.
AUDIO
MODE
AISOUND
TVSPEAKERS
Select the audio mode:
13
STEREO - Two channel audio reception.
13 SAP - (Second Audio Program) Tune to the alternate audio channel if available in your area
(bilingual or descriptive audio).
13 MONO - One channel audio.
Use when stereo signal is weak.
Automatically .maintain constant volume between programs and commercials.
Select TV SPEAKERS:
13 ON - TV SPEAKERS operate normally.
13
OFF&VAO (Variable Audio Output) - TV Speakers off -- audio adjustable by TV.
0 OFF&FAO (Fixed Audio Output) - TV SPEAKERS off w audio adjustable only by the amplifier
(some models).
I
ia
MAIN MENU FEATURE CHART
Main Menu Feature Chart (Cont.)
CHANNEL
CAPTION
SLEEP TIMER
PROGRAM TIMER
+
H
PICTURE NORM
COLOR
TINT
BRIGHTNESS
PICTURE
SHARPNESS
GAME GUARD
CH CAP
Provide labels for up to 30 stations using up to four characters for each station.
TIMER
Program TV to automatically turn off in 30, 60, or
90 minutes. Select NO to turn timer off.
Program "IV to automatically turn on and off at selected time on a selected channel, daily or only one day.
PICTURE
Reset all picture adjustments to factory default settings.
Adjust desired color intensity.
Adjust natural flesh tones.
Adjust dark areas for crisp detail.
Adjust white areas of picture.
Adjust clarity of outline detail.
LOC
Program to prevent video games, cable box, and VCR's from being viewed.
SPECIAL FEATURES
Special Features
Languages
In SET UP menu, select ENGLISH, ESPAI_IOL, OR FRAN(_AIS.
SET-UP
SET TIME
ANT ....
AUTO PROG
MANUAL PROG
AUTO POWER ON
I-_ MODE
00 : 00
CABLE
NO
NO
OFF
OFF
PM
GEOMAGNETIC CORR NO
Geomagnetic Corr (Correction)
_
M
(some models)
In SET-UP menu, select GEOMAGNETIC
CORR to adjust discoloration due
to the geomagnetic field in the area. Use the navigation keys to adjust the tilt
bar parallel to the bottom of the picture frame.
SET-UP
SET TIME
ANT
AUTO PROG
MANUAL PROG
AUTO POWER ON
MODE
_
00 : 00
CABLE
NO
NO
OFF
OFF
ENGLISH ESPAQOL FRAN(_AIS
PM
Timer
Sleep Timer
In TIMER menu, program to turn "IV OFF in 30, 60, or 90 minutes. Select
NO to turn off timer.
Note:
12:00
• 12:00
3
'
PM
AM
TIME FIRST
Auto Power On in the Set Up Menu must be OFF to use the
Sleep 77met.
in
SPECIAL FEATURES
Program Timer
D
In Timer menu, program TV to automatically turn on'and off at selected time on a selected channel, daily or one day.
Note:
TIMER CONTROL
SLEEP TIMER NO
ON
OFF
CHANNEL
SET
12 : 00 PM
12 : 00 AM
3
TIME FIRST
TIME must be entered in the SET
UP
PROGRAM TIMER.
menu to operate
,_ I ,'/
Turn Off After 90 Minutes
r
The TV automatically turns OFF after 90 minutes
when turned on by the PROGRAM TIMER.
If the
OFF time is programmed or if a key is pressed, the automatic OFF after 90 minutes will be cancelled.
, __
PROGRAM TIMER Activation
The PROGRAM TIMER is active when the TV is
OFF o_ ON.
The TV will switch to the selected
channel
at the selected time set by the
PROGRAM TIMER,
m
SPECIAL FEATURES
3H CAP
(Channel Caption)
_
Program channel captions (station labels) for 30 stations using up to four characters.
CHANNEL CAPTION
123
ENTER CAPTION
Note:
& TO MOVE
• CURSOR
,b, TO SELECT
CHANNEL
Delete channel captions by entering dashes (-) in all four character slots.
LOCK
Game Guard Lock
In LOCK menu, use to prevent video games and VCR's from being viewed for 12, 24, or 48 hours using a secret code.
Lock Channel 3, Channel 4, and video inputs for 12, 24, or 48 hours by entering a three-digit secret code.
Unlock GAME GUARD by entering the same three-digit secret code.
GAME LOCK
LOCKS CH 3, 4, AND VIDEO INPUTS
HOW LONG?
ENTER CODE
12 HRS
-
Note:
Understand how to unlock GAME GUARD before using it. Use a code that is easy to remember or record it in a safe place.
\\ tj.
GAME GUARD
Unlock
"-_\_I_
If you do not remember your code, Game Guard will unlock in 12, 24, or 48 hours depending on
last setup.
El
SPECIAL FEATURES
Unlocking Game Guard
GAME GUARD
LOCKED
L_K AcmVA_D
ENTER CODE TO CHANGE SE'I-FING
Enter the same three-digit code.
INVALID CODE
If the three-digit code is not the same as entered previously.
If the same three-digit code is used.
Bi
TROUBLESHOOTING
Troubleshooting Chart
Before calling for service, determine the symptoms and follow suggested solutions.
CHART
Adjust Antenna Location and Connection r:_loisy Audio
\
Noisy Audio
\
Noisy Audio
No Audio
\
Noisy Audio
No Audio
\
Normal Audio
Wrong Audio
Normal Audio
Adjust Antenna Location and Connection
Check Antenna Lead-in Wire
Multiple Image
Move TV from Electrical Appliances, Lights, Vehicles,
and Medical Equipment
Interference
Increase Volume
Change Channel
Normal Video
No Video
No Video
No PIP
I
No Color i
Set "IV or Cable Mode Properly
Check Antenna Cables
Check Power Cord is Plugged into Active Outlet
Adjust Brightness and Audio Controls
Change Channel
Check Cable Connections
Program the Remote Control Again
Check Second Video Source Operation
Adjust Color Settings
Change Channel
Check Audio Is Set To Stereo Or Mono, Not SAP
Normal Video
N-
Discoloration
Adjust Geomagnetic Corr (Correction) in the
SET-UP menu
Norn).alAudio Normal Video
Intermittent Remote Control Operation
Replace Remote Control Batteries
la
NOTES
Read these instructions completely before operating TV.
Contents are subject to change without notice or obligation.
Copyright1998 by MatsushitaElectricCorporationofAmerica. All rights reserved.
.-Unauthorized copying and distributionis a violation of law.
Panasonlc Consumer Electronics Company,
Division of Matsushita
Electric Corporation of America
One Panesonic Way
Secaucus, New Jersey 07094 www.panesonic.com
(80Q) 2"2-2-4213
IB
Panasonlc de Mexico, S.A, de C.V.
Amores No. 1120
Col. Del Valle C.P. 03100
M_xico, D.F.
Tel. (915 b 015) 488-1000
Fax (915 b 015) 575-6763, 575-6765
Panesonlc Sales Company,
Division of Matsushlta Electric " of Puerto Rico Inc. ("PSC")
Ave. 65 de Infanterla, Km 9.5
San Gabriel Industdel Park
Carolina, Puerto Rico 00985
Tel, (787) 750-4300
Fax (787) 768-2910
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement