Xtreme XBH9-1013 Retrax Bluetooth Retractable Earbuds Headset Manual

DC XTREME
RETRAX
BLUETOOTH® RETRACTABLE EARBUDS HEADSET
Bendable Neck
3
Previous Next Song
7
2
Answer Button — Micro USB Charging Port
Retract Button
Volume Control
855-999-8041 | www.XtremeCables.com
MANUAL
Charging The Bluetooth Headphones
-To charge your Xtreme RETRAX Bluetooth headphones, connect the supplied
cable to the Micro-USB (7) charging port and connect the other end to a USB
power outlet (5V adaptor not included) for a minimum of 3 hours
- For best performance, Please make sure battery is fully charged before use.
Operating Bluetooth headphones
1. Turn the RETRAX headphones on by sliding the power switch to the ON
position (1)
2. The headphones will enter pairing mode. The LED (6) will flash red and blue.
Enable Bluetooth search mode on your audio device and search for pairing
name RETRAX and select it on your audio device. Once the Xtreme Retrax
Bluetooth headphones has successfully connected, device will state that the
device has been connected. The LED (6) will flash blue.
3. Press the Answer/End button (2) to answer and end calls. Double press, to
redial the last number called.
4. To change to the next track, slide the Next/Previous slider button (3) to the
“MW” position. To go to the previous track, slide the button to the “pq ”
position.
Press the” 11 ” button (4) to pause and play music.
To lower volume, slide the Volume slider button (5) to the “—” position, to
raise the volume, slide the button to the “+” position.
7. To power down the headphones, slide the power switch (1) to the “OFF”
position. The device will state “Power Off” and the LED (6) will remain off.
on л
(1) Power Switch
(2) Answer/End Button
(3) Previous/Next Track Slider Button
(4) Pause/Play Button
(5) Volume Slider button
(6) LED indicator
(7) Charging Port