Hasbro Speedstars Lightning Launcher Brick Bash Stunt Instructions

 AGES 3+
06895/06894 Asst.
06898/06894 Asst.
ET
A О: EEE
CE ARE TAN
Lightning Launchers
Brick Bash Stunt"
Thank you for choosing this awesome SPEEDSTARS playset!
Includes | light-up car body, | car
chassis, 2 brick wall halves,
| stunt base, | ramp, | winder/
launcher combo.
WW SS CN Batteries included. Replace
SD with 3 x 1.5V “A76”
or LR44 size alkaline
batteries. Phillips/cross
head screwdriver
(not included) required to
replace batteries.
/\ CAUTION:
Hair entanglement may result if child's hair
comes in contact with moving parts of toy.
Adult supervision is required.
Adult Assembly
Required.
ASSEMBLY
l. With brick walls facing
center, attach brick wall
halves to stunt base by
inserting brick wall pins
into stunt base pin holes.
Insert the long pin first
and twist so smaller pin
fits into place. Repeat
step for both sides.
PLAY FEATURES
Enjoy awesome crashes, bashes and spills with this brick bash stunt
designed just for preschoolers!
4. Attach launcher to ramp.
NOTE: This step is
optional. Desired
launching distance
may vary.
position.
3. Fit stunt base onto ramp
by press down on
side tabs.
2. Place the car onto the launcher, hold the
car in place and crank the winder handle
until you hear a ratcheting sound.
3. Line the car up with the stunt
ramp.
NOTE: You can attach the
launcher to the ramp or line
them up separately at a desired
distance.
Launcher
Button
Activation
Button
4. Press activation button on top of
car to start the lights.
5. Press the launch button on the
launcher to send the car racing
through the brick wall!
NOTE: To remove car body from
chassis, push in latch on front of
chassis.
= Г)
ge A A
+= 7
TO REPLACE BATTERIES
Use a Phillips/crosshead screwdriver
(not included) to loosen screw in
battery compartment door. Remove
and discard old batteries. Insert 3 x
1.5V fresh “A76” or LR44 size alkaline
batteries. Replace door and
tighten screw.
/\ CAUTION: TO AVOID BATTERY LEAKAGE
1. As with all small batteries, the batteries used with this toy should be
kept away from small children who still put things in their mouths.
If they are swallowed, promptly see a doctor and, in the U.S., have
the doctor phone (202) 625-3333 collect, or, in Canada, have the
doctor call your provincial Poison Control Centre.
2. Make sure the batteries are inserted correctly and always follow the
toy and battery manufacturers” instructions;
3. Do not mix old batteries and new batteries or alkaline, standard
(carbon zinc) or rechargeable (nickel-cadmium) batteries.
/N\ IMPORTANT: BATTERY INFORMATION
Please retain this information for future reference.
Batteries should be replaced by an adult.
CAUTION:
1
Always follow the instructions carefully. Use only batteries specified and be
sure to insert them correctly by matching the + and — polarity markings.
2. Do not mix old batteries and new batteries or standard (carbon-zinc) with
alkaline batteries.
Remove exhausted or dead batteries from the product.
Remove batteries if product is not to be played with for a long time.
Do not short circuit the supply terminals.
Should this product cause, or be affected by, local electrical interference,
move it away from other electrical equipment. Reset (switching off and back
on again or removing and re-inserting batteries) if necessary.
7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery.
Always remove from the product before recharging. Recharge batteries under
adult supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.
8. As with all small items, these batteries should be kept away from children. If
swallowed, seek medical attention immediately.
о се ©
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including any interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
© 2004 Hasbro. All Rights Reserved.
® denotes Reg. U.S. Pat. & TM Office. EE ATTY
06895 & 06898/06894 Asst. P/N 6364220000 c-o22e Questions? Call: 1-800-PLAYSKL