10x12 BRINDLEWOOD GAZEBO

Model # 2106512

Owner's Manual & Assembly Instructions

MANUFACTURED BY:

Backyard Discovery

3305 Airport Drive

Pittsburg, KS 66762

800-856-4445

average 2 person assembly time assembly time may vary based on skill level

For the most up to date assembly manual, to register your set, or to order replacement parts please visit

www.backyarddiscovery.com

SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT

YOU NEED TO ORDER REPLACEMENT PARTS.

Made in China | INS-2106512-A-BRINDLEWOOD-ENG

INSTALLATION

SERVICES

AVAILABLE!

*

Need a helping hand?

Let our team of professionals handle the installation for you!

*Installation services are only available to U.S. customers.

With Go Configure, we bring you 18 years of experience right to your doorstep.

We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver & install themselves.

We do the heavy lifting, so you don’t have to!

• 18+ Years of Experience Servicing Big Box Retailers and Direct Consumers

• Highly Skilled, Specialized, Courteous, Professional Service Technicians

• Over 140,000 Installations Annually

• White Glove Service

• Satisfaction Guarantee

• Flexible Appointments, including weekends

• Coverage across the nation

Visit www.goconfigure.com for more info!

*Installation services are only available to U.S. customers.

2

Owner’s Manual

Please Read This Before Starting Assembly

0,66,1*$3$57"

&$//86%()25(*2,1*

%$&.727+(6725(

The store where you made your purchase does not stock parts for this item.

If you have assembly questions or you are missing or have damaged parts, please call

you can also visit www.backyarddiscovery.com or e-mail [email protected]

Please have the following information ready when you make your call:

• Model Number of the product located on the front of the assembly manual

• The item description and number from the parts list from the manual that was included in your box

• Read entire assembly manual, paying special attention to the important tips and safety information.

• To ensure there are no missing pieces do a complete inventory by fi rst separating and identifying all parts.

• Make sure to check packing material for small parts that may have fallen out during shipment.

• Structures are not intended for public use. The Company does not warranty any of its residential structures subjected to commercial use.

• This manual contains helpful information concerning assembly preparation, installation procedure and required maintenance.

• Always keep safety in mind as your structure is being built.

• Keep these instructions for future reference.

3

Owner’s Manual

Limited Warranty

Please read entire booklet completely before beginning the assembly process

Please retain these instructions and your receipt for future reference. Keep them in a safe place where you can refer to them as needed.

For Your Records:

Please take time and fi ll out the information below. This information will be needed for warranty issues.

Where Purchased:

Date of Purchase:

Installation Date:

Installed by:

Tracking Number:

Tracking Number Reference Label

Tracking ID number on the carton and on the bottom of the vertical ID plate are included for tracking purposes associated with warranty claims.

This Limited Warranty by Backyard Discovery applies to products manufactured under the Backyard Discovery brand or its other brands including but not limited to Backyard

Botanical, Adventure Playsets, and Leisure Time Products.

Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a fi ve (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty. In addition, Backyard Discovery will replace any parts within the fi rst 30 days from date of purchase found to be missing from or damaged in the original packaging.

This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance is required to assure maximum life and performance of this product.

Failure by the owner to maintain the product according to the maintenance requirements may void this warranty. Maintenance guidelines are provided in the Owner’s Manual.

This Limited Warranty does not cover:

• Labor for any inspection

• Labor for replacement of any defective item(s)

• Incidental or consequential damages

• Cosmetic defects which do not aff ect performance or integrity of a part or the entire product

• Vandalism, improper use, failure due to loading or use beyond the capacities stated in the applicable Assembly Manual.

• Acts of nature including but not limited to wind, storms, hail, fl oods, excessive water exposure

• Improper installation including but not limited to installation on uneven, unlevel, or soft ground

• Minor twisting, warping, checking, or any other natural occurring properties of wood that do not aff ect performance or integrity

Backyard Discovery products have been designed for safety and quality. Any modifi cations made to the original product could damage the structural integrity of the unit leading to failure and possible injury. Modifi cation voids any and all warranties and Backyard Discovery assumes no liability for any modifi ed products or consequences resulting from failure of a modifi ed product.

This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a Backyard Discovery product be used in public settings. Such use may lead to product failure and potential injury. Any and all public use will void this warranty. Backyard Discovery disclaims all other representations and warranties of any kind, express or implied.

3UR5DWHG3DUW5HSODFHPHQW6FKHGXOH

3URGXFW$JH

$OO3DUWV

GD\VIURPGDWHRISXUFKDVH

GD\VWR\HDU

&XVWRPHU3D\V

DQGIUHHVKLSSLQJ

6 +

:RRG5RWDQG'HFD\2QO\

\HDU

\HDU

\HDU

\HDU

\HDU

2YHU\HDUV

DQGIUHHVKLSSLQJ

6 +

6 +

6 +

6 +

6 +

4

Owner’s Manual

Safety Warnings and Maintenance Instructions

:$51,1*

IT IS IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING

THE SEASON AS THEY MAY LOOSEN DUE TO WOOD EXPANSION AND CONTRACTION.

• DO NOT climb or walk on the roof for any reason

• Oil all metallic moving parts monthly during the usage

• Requires two or more people to assemble safely

period.

• Check for underground utilities before digging or

• Check all coverings for bolts and sharp edges twice

driving stakes into the ground.

• Check carefully for overhead lines and ensure there is

monthly during usage season to be certain they are in place. Replace when necessary. It is especially important

at least 6ft (2m) clearance from any overhead electrical wires.

to do this at the beginning of each new season.

• For rusted areas on metallic members such as hinges,

•

•

•

•

• Permanent structures may require a building permit.

brackets, etc. sand and repaint, using a non lead-based

As the purchaser and or installer of this product you are

paint meeting the requirements of Title 16 CRF Part 1303.

advised to consult local planning, zoning and building

• Inspect wood parts monthly. The grain of the wood

inspection departments for guidance on applicable

sometimes will lift in the dry season causing splinters to

building codes and/or zoning requirements.

appear. Light sanding may be necessary to maintain a

Wood is NOT fl ame retardant and will burn. Grills, fi re pits safe environment. Treating your Product with protection and chimineas are a fi re hazard if place too close to your

(sealant) after sanding will help prevent severe checking/ structure.

splitting and other weather damage.

Wear gloves to avoid injury during installation.

• We have applied a waterborne translucent stain to your

During installation, follow all safety warnings provided unit. This is done for color only. Once or twice a year, with your tools and use safety glasses.

depending on your climate conditions, you must apply

Check all nuts and bolts twice monthly during the usage some type of protection (sealant) to the wood of your unit.

season and tighten as required.(But not so tight that you

Prior to the application of sealant, lightly sand any “rough” crack the wood) It is particularly important that this spots on your set. Please note this is a requirement of procedure be followed at the beginning of each season.

your warranty.

OWNERS SHALL BE RESPONSIBLE FOR MAINTAINING THE LEGIBILITY OF THE WARNING LABELS

5

Owner’s Manual

Instructions for Proper Maintenance

Your Backyard Discovery structure is designed and constructed of quality materials. As with all outdoor products it will weather and wear. To maximize the enjoyment, safety and life of your structure it is important that you properly maintain it.

About Our Wood

Backyard Discovery uses 100% Cedar (C. Lanceolata) wood. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.

What causes weathering? Does it aff ect the strength of my product?

How can I reduce the amount of weathering to wood product?

One of the main reasons for weathering is the eff ects of water (moisture); the moisture content of the wood at the surface is diff erent than the interior of the wood. As the climate changes, moisture moves in or out of the wood, causing tension which can result in checking and or warping. You can expect the following due to weathering. These changes will not aff ect the strength of the product:

1. Checking

is surface cracks in the wood along the grain. A post (4” x 4”) will experience more checking than a board (1” x 4”) because the surface and interior moisture content will vary more widely than in thinner wood.

1.

Your wood product is coated with a water-based stain .

Sunlight will break down the coating, so we recommend applying a water repellent or stain on a yearly basis

(see your local stain and paint supplier for a recommended product). You must apply some type of protection (sealant) to the wood of your product.

Please note this is a requirement of your warranty

.

Most weathering is just the normal result of nature and will not aff ect safety. However if you are concerned that a part has experienced a severe weathering problem please call our customer service department for further assistance.

2. Warping

results from any distortion (twisting, cupping) from the original plane of the board and often happens from rapid wetting and drying of the wood.

2.

Inspect wood parts monthly. The grain of the wood sometimes will lift in the dry season causing splinters to appear. Light sanding may be necessary to maintain a safe environment.

Treating your Product with protection (sealant) after sanding will help prevent severe checking/ splitting and other weather damage.

3. Fading

happens as a natural change in the wood color as it is exposed to sun-light and will turn grey over time.

6

Owner’s Manual

Protrusion Hazard

Incorrect

Assembly Tips

Correct

If you see exposed threads and your bolt protrudes beyond the

T-Nut you may have over tightened the bolt or used incorrect hardware.

If you’ve overtightened, remove the bolt and add washers to eliminate the protrusion.

´

Proper Hardware Assembly

%2/7

Bolt and T-Nut Assembly

Tap T-nut into the provided hole. Insert your bolt through the lock washer and insert into the provided hole opposite from the T-Nut. Turn clockwise to thread into T-nut. Do not completely tighten until instructed.

/2&.:$6+(5

7187

%2/7

Bolt and Barrel Nut Assembly

Insert barrel nut through the lock washer and press the pair through the provided hole. Insert your bolt through the second lock washer and insert the pair into the provided hole opposite from the barrel nut. Turn clockwise to thread into the barrel nut. Do not completely tighten until instructed.

%$55(/187

/2&.:$6+(5

/2&.:$6+(5

/$*6&5(:

Lag Assembly

Normally there will be a pre-drilled pilot hole on assemblies that require a Lag Screw. If there is no pilot hole, line up the two boards as they are to be attached and use the factory drilled hole as a guide to drill another pilot hole into the adjoining board. This will keep the wood from splitting. Only a lock washer is required for steps with Lag Screws.

7

/2&.:$6+(5

Owner’s Manual

Assembly Tips

ASSEMBLY TIP:

Keep and eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible.

Sorting Wood

E1

E2

F1

F2

G1

G2

When removing the wood from the boxes we recommend arranging them by part number before you begin assembly. This will allow for faster assembly and easily identify any parts that may be missing or damaged.

NUT BARREL

H100545

SCREW

H100695

T-NUT

H100699

Sorting Hardware

WASHER FLAT

H100706

BOLT HEX

H100716

BOLT

H100718

SCREW PWH

H100742

To help with assembly we recommend sorting your hardware bags with the seven digit alpha-numeric number printed on the bags or by hardware type (i.e. bolts, nuts, etc.). Organizing your hardware will make assembly easier.

Hardware Identifi cation

Hardware bags are printed with a seven digit alpha-numeric part number. During assembly you only need to reference the last three digits of the part number as noted in each step. This will make fi nding the correct hardware easier.

H100378

(x2)

BOLT WH

5/16 x 1-3/4

378

(x2)

198

(x2)

192

(x2)

199

(x2)

8

Owner's Manual

ǻŸŸĶǣNJsLJȖÞNjs_¯ŸNjÝŘǣǼĶĶǼÞŸŘ

1(('('

3/8

5/16

9

Owner's Manual

DǣÞOǢsǼȖƼ^ÞŎsŘǣÞŸŘǣ˓ǣǣsŎEĶɴŗŸǼsǣ

It is critically important that you start with square and level footings, concrete pad or deck to attach your structure

‡

Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step. Using incorrect hardware may result in improper assembly

‡

Remember to double check for underground utilities and overhead electrical lines

Post mounts are provided with your structure which allows you to permanently install your structure to a pre-existing or new wood or concrete surface.

‡

The hardware to attach the post mounts to the structure is included.

‡

The hardware to mount the structure permanently to a concrete surface is included.

‡

The hardware to mount the structure permanently to a wood deck is NOT included and will need to be purchased separately.

You must ensure there is ample structural support under the deck before permanently attaching.

Metal Roof Assembly

Remove plastic covering from metal roof panels before installing each piece. Place roofing materials on a nonabrasive, flat surface before and after assembly as it could bend, dent or scratch

12'- 3/4"

[3.7 m]

15'-9 1/4"

[4.8 m]

10'-3"

[3.1 m]

8'-1 1/2"

[2.5 m]

9'-3 1/2"

[2.8 m]

10'-2"

[3.1 m]

12'- 1/4"

[3.7 m]

9'-7"

[2.9 m]

10'-9 1/4"

[3.3 m]

7'-2 1/2"

[2.2 m]

10

Owner's Manual

ƻNjǼǣÝ_sŘǼÞ¯ÞOǼÞŸŘ ɟŸŸ_NŸŎƼŸŘsŘǼǣʹŗŸǼǼŸǢOĶsʺ

D1

(x4)

GABLE BOARD - W4L13344

1 3/8"x5 1/4"x24 1/4" (36x134x615)

D2

(x4)

TOP RAIL - W4L13805

1 3/8" x 5 1/4" x 31 3/8" (36 x 134 x 796)

D4

(x4)

D3

(x2)

TOP RAIL - W4L13347

1 3/8"x5 1/4"x62 1/4" (36x134x1582)

CORBEL - W4L13804

1 3/8"x5 1/4"x35 7/8" (36x134x910)

D5

(x2)

GABLE BOARD - W4L13349

1 3/8"x1 1/2"x5 1/4" (36x38x134)

H2

(x2)

E3

(x8)

D6

(x4)

CORBEL - W4L13803

1 3/8"x5 1/4"x46 1/2" (36x134x1180)

E1

(x8)

RAFTER - W4L13340

1 3/8"x3 3/8"x77 3/8" (36x86x1965)

E2

(x4)

TRUSS - W4L13836

1 7/16" x 1 15/16" x 74 15/16" (36 x 50 x 1903)

SHEATHING BOARD - W4L13341

1 3/8"x3 3/8"x73 1/4" (36x86x1861)

FASCIA - W4L13339

1"x3 3/8"x74 5/8" (24x86x1896)

E4

(x8)

SHEATHING BOARD - W4L13342

1 3/8"x3 3/8"x45 3/4" (36x86x1161)

H3

(x2)

FASCIA - W4L13345

1"x3 3/8"x44" (24x86x1118)

H4

(x2)

RAFTER - W4L13806

1"x3 3/8"x39 3/4" (24x86x1011)

H5

(x2)

RAFTER - W4L13807

1"x3 3/8"x70 1/2" (24x86x1789)

J10

(2)

RIDGE CAP STIFFENER - W4L13591

1"x2 3/8"x69 1/4" (24x60x1760)

J9

(2)

RIDGE CAP STIFFENER - W4L13590

1"x2 3/8"x47 5/8" (24x60x1210)

11

Owner's Manual

ƻNjǼǣÝ_sŘǼÞ¯ÞOǼÞŸŘ ɟŸŸ_NŸŎƼŸŘsŘǼǣʹŗŸǼǼŸǢOĶsʺ

GT1

(x4)

GABLE TRUSS - W2A02856

2 13/16"x33 5/8"x64 1/2" (72x854x1640)

GP1

(x2)

GABLE PANEL - W2A02847

2 13/16"x5 1/4"x80 3/16" (72x134x2037)

GP2

(x2)

GABLE PANEL - W2A02848

2 13/16"x5 1/4"x80 3/16" (72x134x2037)

P1

(x2)

POST - W2A02854

7"x7"x92 1/16" (178x178x2274)

P2

(x2)

POST - W2A02855

7"x7"x92 1/16" (178x178x2274)

12

Owner's Manual

ƻNjǼǣÝ_sŘǼÞ¯ÞOǼÞŸŘ

ËNj_ɠNjsNŸŎƼŸŘsŘǼǣ

H100468

(x22)

BOLT WH BLK

5/16x1

H100459

(x54)

BOLT WH BLK

5/16x1 1/4

H100564

(x13)

LAG SCREW WH BLK

1/4x4

H100792

(x9)

LAG SCREW WH BLK

1/4x3

H100407

(x3)

BOLT WH BLK

5/16x1 1/2

H100378

(x2)

BOLT WH BLK

5/16x1 3/4

H100193

(x30)

NUT BARREL

WH BLK

5/16x1-1/2

H100471

(x50)

LAG SCREW

WH BLK

5/16x1 1/2

H100205

(x26)

BOLT WH BLK

5/16x2-1/4

H100512

(x9)

BOLT WH BLK

5/16x4

H100192

(x95)

NUT BARREL

WH BLK

5/16x7/8

H100379

(x18)

T-NUT BLK

5/16

H100354

(x4)

BOLT WH BLK

5/16x6 1/2

H100963

(x30)

BOLT WH BLK

5/16x7-3/4

13

Owner's Manual

ƻNjǼǣÝ_sŘǼÞ¯ÞOǼÞŸŘ

ËNj_ɠNjsNŸŎƼŸŘsŘǼǣ

H100201

(22)

SCREW PFH BLK

8x2-1/2

H100483

(x4)

SCREW PFH BLK

8x2 1/4

H100391

(x64)

SCREW PFH BLK

8x2

H100200

(x35)

SCREW PFH BLK

8x1 1/2

H100797

(x17)

SCREW PWH BLK

8x1

H100392

(x17)

SCREW PWH BLK

8x3/4

H100760

(x132)

SCREW WOODGRIP

10x1 1/4

H100833

(x17)

SCREW

WOODGRIP

10x3/4

H100759

(x17)

SCREW

TAPPING

1/4x3/4

H100479

(x4)

NUT LOCK BLK

5/16

H100199

(x63)

WASHER LOCK

EXT BLK

12x19

H100198

(x47)

WASHER LOCK

EXT BLK

8x19

H100630

(x17)

WASHER FLAT

BLK

8x19

H100405

(x22)

WASHER LOCK

EXT BLK

6x15

H100120

(x18)

SCREW CONCRETE ANCHOR

1/4x2

H100764

(x1)

SCREW SETTER

H100770

(4)

WASHER FLAT

BLK

5/16

H100114

(x2)

TORX WRENCH

T-30

H100147

(x2)

TORX BIT

T-30

A100042

(x2)

TORX BIT

T-40

A100041

(x2)

TORX WRENCH

T-40

14

Owner's Manual

ƻNjǼǣÝ_sŘǼÞ¯ÞOǼÞŸŘ

OOsǣǣŸNjɴNŸŎƼŸŘsŘǼǣʹŗŸǼǼŸǢOĶsʺ

A4M01130

(x2)

GABLE BRACKET

A4M01147

(x2)

PEAK SEAM BRACKET

A4M01129

(x4)

GABLE BRACKET

A4M01152

(x2)

LEFT OUTSIDE BRACKET

A4M01151

(x2)

RIGHT OUTSIDE BRACKET

A4M01154

(x2)

RIGHT ANGLE

BRACKET

A4M01153

(x2)

LEFT ANGLE

BRACKET

A4M01155

(x4)

TIE BRACKET

A4M00950

(x8)

STEEL POST PLATE

A4M00949

(x8)

STEEL POST

ANCHORING

PLATE WITH

FLANGE

A6P00296

(x4)

7x7 POST FOOT

A100241

(x1)

BYD ID TAG

(SMALL)

WITHOUT AGES

A100314

(x1)

"A" REVISION TAG

A4M01148

(x2)

TRUSS

BRACKET

15

Owner's Manual

ƻNjǼǣÝ_sŘǼÞ¯ÞOǼÞŸŘ

OOsǣǣŸNjɴNŸŎƼŸŘsŘǼǣʹŗŸǼǼŸǢOĶsʺ

A4M01124

(x8)

29 GA STEEL SHEETING

A6P00398

(x2)

RIDGE CAP PROTECTOR

A4M01116

(x2)

RIDGE CAP 29 GA

A4M01127

(x1)

RIDGE CAP SPLICE

A4M00983

(x2)

ROOF EDGE TRIM SPLICE

A4M00982

(x4)

ROOF EDGE TRIM

9205413

(x1)

ELECTRICAL ENCLOSURE

16

GAZEBO ASSEMBLY

P1

(x2)

POST - W2A02854

6"x6"x92 1/16" (178x178x2274)

P2

(x2)

POST - W2A02855

6"x6"x92 1/16" (178x178x2274)

COMPLETE THIS STEP TWICE

Ǣǻrƻˠ

A6P00296

(x4)

7x7 POST FOOT

H100200

(x16)

SCREW PFH BLK

8x1 1/2

ǻÝƻʲ

FOR EASE OF ASSEMBLY WE RECOMMEND USING

SAW HORSES FOR STEPS 1 THRU 6.

ƻˡ

ʹɮˠʺ

ƻŷǢǻ

ƻˠ

ʹɮˠʺ

ƻŷǢǻ ˡ˨˥

ʹɮˡʺ

˦ɮ˦ƻŷǢǻ®ŷŷǻ ˡ˟˟

ʹɮ˧ʺ

ǢNNJrɟ˚ˠˠˀˡ˃

17

GAZEBO ASSEMBLY

D1

(x4)

GABLE BOARD - W4L13344

1 3/8"x5 1/4"x24 1/4" (36x134x615)

D5

(x2)

GABLE BOARD - W4L13349

1 3/8"x1 1/2"x5 1/4" (36x38x134)

GT1

(x4)

GABLE TRUSS - W2A02856

2 13/16"x33 5/8"x64 1/2" (72x854x1640)

A4M01129

(x4)

GABLE BRACKET

COMPLETE THIS STEP TWICE ˤˠˡ

ʹɮˣʺ

Dŷĵǻ˚ˤˀˠ˥ɮˣ˃ ˣˤ˨

ʹɮ˧ʺ

Dŷĵǻ˚ˠˠˀˣ˃

Ǣǻrƻˡ

H100512

(x8)

BOLT WH BLK

5/16x4

H100459

(x16)

BOLT WH BLK

5/16x1 1/4

H100192

(x24)

NUT BARREL

WH BLK

5/16x7/8

H100483

(x4)

SCREW PFH BLK

8x2 1/4

ŗŷǻrʲ

IF NEEDED FOR EASE OF

ASSEMBLY, USE METAL

BRACKET AS A GUIDE AND DRILL

THRU USING A 7/16" - (10mm)

DRILL BIT, THEN ASSEMBLE.

µǻˠ

ʹɮˠʺ

µDĵr ǻNJȕǢǢ ǻÝƻʲ

TEMPORARILY ADD LONG BOLTS

TO HELP ALIGN WOOD PARTS.

^ˠ

ʹɮˠʺ

µDĵrDŷNJ^ ˠˡ˨

ʹɮˡʺ

µDĵrDNJNħrǻ ˣ˧ˢ

ʹɮˡʺ

ǢNNJrɟ˚˧ɮˡˠˀˣ˃

^ˤ

ʹɮˠʺ

µDĵrDŷNJ^

^ˠ

ʹɮˠʺ

µDĵrDŷNJ^ ˠ˨ˡ

ʹɮˠˡʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃

µǻ ˠ

ʹɮˠʺ

µDĵr ǻNJȕǢǢ

18

GAZEBO ASSEMBLY

D2

(x4)

TOP RAIL - W4L13805

1 3/8" x 5 1/4" x 31 3/8" (36 x 134 x 796)

GABLE TRUSS ASSEMBLY

(x2) FROM PREVIOUS STEP

P1

(x2)

POST - W2A02854

6"x6"x92 1/16" (178x178x2274)

Ǣǻrƻˢ

H100963

(x28)

BOLT WH BLK

5/16x7-3/4

P2

(x2)

POST - W2A02855

6"x6"x92 1/16" (178x178x2274)

H100459

(x20)

BOLT WH BLK

5/16x1 1/4

H100468

(x20)

BOLT WH BLK

5/16x1

H100471

(x8)

LAG SCREW

WH BLK

5/16x1 1/2

A4M01152

(x2)

LEFT OUTSIDE

BRACKET

A4M01151

(x2)

RIGHT OUTSIDE

BRACKET

A4M01154

(x2)

RIGHT ANGLE

BRACKET

A4M01153

(x2)

LEFT ANGLE

BRACKET

COMPLETE THIS STEP TWICE

GABLE TRUSS ASSEMBLY ˠ˨˨

ʹɮˤʺ

ɟǢËrNJ˚ˠˡɮˠ˨ ˠ˨ˡ

ʹɮˤʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃

H100193

(x28)

NUT BARREL

WH BLK

5/16x1-1/2

H100192

(x40)

NUT BARREL

WH BLK

5/16x7/8

H100199

(x32)

WASHER LOCK

EXT BLK

12x19

GABLE TRUSS

ASSEMBLY ˠ˨ˡ

ʹɮˤʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃ ˠ˨ˢ

ʹɮˢʺ

ŗȕǻDNJNJrĵ˚ˠˠˀˡ˃ ˠ˨˨

ʹɮˢʺ

ɟǢËrNJ˚ˠˡɮˠ˨

P2

P1

^ˡ

ʹɮˠʺ

ǻŷƻNJÝĵ ˠˤˡ

ʹɮˠʺ

ĵr®ǻŷȕǻǢÝ^rDNJNħrǻ ˠ˨ˢ

ʹɮˣʺ

ŗȕǻDNJNJrĵ˚ˠˠˀˡ˃ ˣ˦ˠ

ʹɮˠʺ

ĵµǢNNJrɟ˚ˠˠˀˡ˃ ˠˤˢ

ʹɮˠʺ

ĵr®ǻŗµĵrDNJNħrǻ

P1

(x1)

POST ˣ˥˧

ʹɮˤʺ

DŷĵǻɟË˚ˠ˃

˨˥ˢ

ʹɮˣʺ

Dŷĵǻ˚˦˚ˢˀˣ˃

˨˥ˢ

ʹɮˢʺ

Dŷĵǻ˚˦˚ˢˀˣ˃ ˣˤ˨

ʹɮˤʺ

Dŷĵǻ˚ˠˠˀˣ˃ ˣ˦ˠ

ʹɮˠʺ

ĵµǢNNJrɟ˚ˠˠˀˡ˃

19

STEP 3 CONTINUED ON NEXT PAGE.

GAZEBO ASSEMBLY

Ǣǻrƻˢ D

^ˡ

ʹɮˠʺ

ǻŷƻNJÝĵ ˠˤˠ

ʹɮˠʺ

NJݵËǻŷȕǻǢÝ^rDNJNħrǻ ˣ˥˧

ʹɮˤʺ

DŷĵǻɟË˚ˠ˃

˨˥ˢ

ʹɮˣʺ

Dŷĵǻ˚˦˚ˢˀˣ˃

P2

(x1)

POST ˠˤˣ

ʹɮˠʺ

NJݵËǻŗµĵrDNJNħrǻ

P2

GABLE TRUSS

ASSEMBLY

P1 ˠ˨ ˢ

ʹɮ ˢ ʺ

ŗȕǻDNJNJrĵ˚ ˠˠˀˡ ˃ ˠ˨˨

ʹɮ ˢ ʺ

ɟǢËrNJ˚ˠˡɮˠ˨ ˠ˨ˡ

ʹɮˤʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃ ˠ˨˨

ʹɮˤʺ

ɟǢËrNJ˚ˠˡɮˠ˨ ˠ˨ˡ

ʹɮˤʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃

GABLE TRUSS ASSEMBLY

˨˥ˢ

ʹɮˢʺ

Dŷĵǻ˚˦˚ˢˀˣ˃ ˣˤ˨

ʹɮˤʺ

Dŷĵǻ˚ˠˠˀˣ˃ ˣ˦ˠ

ʹɮˠʺ

ĵµǢNNJrɟ˚ˠˠˀˡ˃

20

ˠ˨ˢ

ʹɮˣʺ

ŗȕǻDNJNJrĵ˚ˠˠˀˡ˃ ˣ˦ˠ

ʹɮˠʺ

ĵµǢNNJrɟ˚ˠˠˀˡ˃

GAZEBO ASSEMBLY

E2

(x4)

TRUSS - W4L13836

1 7/16" x 1 15/16" x 74 15/16" (36 x 50 x 1903)

COMPLETE THIS STEP TWICE

Ǣǻrƻˣ

H100201

(16)

SCREW PFH BLK

8x2-1/2

FLUSH TOPS

rˡ

ʹɮˡʺ

ǻNJȕǢǢ ˡ˟ˠ

ʹɮ˧ʺ

ǢNNJrɟ˚ˡˠˀˡ˃

21

GAZEBO ASSEMBLY

D6

(x4)

CORBEL - W4L13803

1 3/8"x5 1/4"x46 1/2" (36x134x1180)

COMPLETE THIS STEP TWICE

Ǣǻrƻˤ

H100205

(x8)

BOLT WH BLK

5/16x2-1/4

H100792

(x4)

LAG SCREW WH BLK

1/4x3

H100405

(x4)

WASHER LOCK

EXT BLK

6x15

H100192

(x8)

NUT BARREL

WH BLK

5/16x7/8

H100199

(x8)

WASHER LOCK

EXT BLK

12x19

H100198

(x8)

WASHER LOCK

EXT BLK

8x19

ˠ˨ˡ

ʹɮˣʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃ ˠ˨˨

ʹɮˣʺ

ɟǢËrNJ˚ˠˡɮˠ˨ ˣ˟ˤ

ʹɮˡʺ

ɟǢËrNJ˚˥ɮˠˤ

˦˨ˡ

ʹɮˡʺ

ĵµǢNNJrɟ˚ˢ˃ ˠ˨˧

ʹɮˣʺ

ɟǢËrNJ˚˧ɮˠ˨ ˡ˟ˤ

ʹɮˣʺ

Dŷĵǻ˚ˡˠˀˣ˃

^˥

ʹɮˡʺ

NŷNJDrĵ

22

GAZEBO ASSEMBLY

GP1

(x2)

GABLE PANEL - W2A02847

2 13/16"x5 1/4"x80 3/16" (72x134x2037)

GP2

(x2)

GABLE PANEL - W2A02848

2 13/16"x5 1/4"x80 3/16" (72x134x2037)

COMPLETE THIS STEP TWICE

Ǣǻrƻ˥

A4M01147

(x2)

PEAK SEAM

BRACKET

A4M01130

(x2)

GABLE BRACKET

H100564

(x12)

LAG SCREW WH BLK

1/4x4

H100405

(x12)

WASHER LOCK

EXT BLK

6x15

H100471

(x8)

LAG SCREW

WH BLK

5/16x1 1/2

H100200

(x4)

SCREW PFH BLK

8x1 1/2

H100201

(x4)

SCREW PFH BLK

8x2-1/2

FRONT VIEW ǻÝƻʲ

TEMPORARILY ADD LONG BOLTS

TO HELP ALIGN WOOD PARTS.

ˡ˟ˠ

ʹɮˡʺ

ǢNNJrɟ˚ˡˠˀˡ˃

µƻˠ

ʹɮˠʺ

µDĵrƻŗrĵ ˤ˥ˣ

ʹɮ˥ʺ

ĵµǢNNJrɟ˚ˣ˃ ˣ˟ˤ

ʹɮ˥ʺ

ɟǢËrNJ˚˥ɮˠˤ

µƻˡ

ʹɮˠʺ

µDĵrƻŗrĵ ˠˢ˟

ʹɮˠʺ

µDĵrDNJNħrǻ ˠˣ˦

ʹɮˠʺ

ƻrħǢrōDNJNħrǻ

23

ˣ˦ˠ

ʹɮˣʺ

ĵµǢNNJrɟ˚ˠˠˀˡ˃ ˡ˟˟

ʹɮˡʺ

ǢNNJrɟ˚ˠˠˀˡ˃

GAZEBO ASSEMBLY

D3

(x2)

TOP RAIL - W4L13347

1 3/8"x5 1/4"x62 1/4" (36x134x1582)

D4

(x2)

CORBEL - W4L13804

1 3/8"x5 1/4"x35 7/8" (36x134x910)

Ǣǻrƻ˦

H100205

(x8)

BOLT WH BLK

5/16x2-1/4

H100792

(x2)

LAG SCREW WH BLK

1/4x3

H100405

(x2)

WASHER LOCK

EXT BLK

6x15

H100192

(x8)

NUT BARREL

WH BLK

5/16x7/8

H100199

(x8)

WASHER LOCK

EXT BLK

12x19

H100198

(x8)

WASHER LOCK

EXT BLK

8x19

^ˢ

ʹɮˡʺ

ǻŷƻNJÝĵ ˠ˨˧

ʹɮ˧ʺ

ɟǢËrNJ˚˧ɮˠ˨ ˡ˟ˤ

ʹɮ˧ʺ

Dŷĵǻ˚ˡˠˀˣ˃

^ˣ

ʹɮˡʺ

NŷNJDrĵ ˠ˨˨

ʹɮ˧ʺ

ɟǢËrNJ˚ˠˡɮˠ˨ ˠ˨ˡ

ʹɮ˧ʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃

˦˨ˡ

ʹɮˡʺ

ĵµǢNNJrɟ˚ˢ˃ ˣ˟ˤ

ʹɮˡʺ

ɟǢËrNJ˚˥ɮˠˤ

24

GAZEBO ASSEMBLY

D4

(x2)

CORBEL - W4L13804

1 3/8"x5 1/4"x35 7/8" (36x134x910)

ˣ˟ˤ

ʹɮˡʺ

ɟǢËrNJ˚˥ɮˠˤ

˦˨ˡ

ʹɮˡʺ

ĵµǢNNJrɟ˚ˢ˃

Ǣǻrƻ˧

H100205

(x8)

BOLT WH BLK

5/16x2-1/4

H100792

(x2)

LAG SCREW WH BLK

1/4x3

H100405

(x2)

WASHER LOCK

EXT BLK

6x15

H100192

(x8)

NUT BARREL

WH BLK

5/16x7/8

H100199

(x8)

WASHER LOCK

EXT BLK

12x19

H100198

(x8)

WASHER LOCK

EXT BLK

8x19

^ˣ

ʹɮˡʺ

NŷNJDrĵ ˠ˨˧

ʹɮ ˧ ʺ

ɟǢËrNJ˚˧ɮˠ˨ ˡ˟ˤ

ʹɮ ˧ ʺ

Dŷĵǻ˚ˡˠˀˣ˃ ˠ˨˨

ʹɮ ˧ ʺ

ɟǢËrNJ˚ˠˡɮˠ˨ ˠ˨ˡ

ʹɮ ˧ ʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃

25

GAZEBO ASSEMBLY

Ǣǻrƻ˨

E1

(x8)

RAFTER - W4L13340

1 3/8"x3 3/8"x77 3/8" (36x86x1965)

H2

(x2)

FASCIA - W4L13339

1"x3 3/8"x74 5/8" (24x86x1896)

H3

(x2)

FASCIA - W4L13345

1"x3 3/8"x44" (24x86x1118)

H4

(x2)

RAFTER - W4L13806

1"x3 3/8"x39 3/4" (24x86x1011)

COMPLETE THIS STEP TWICE

H5

(x2)

RAFTER - W4L13807

1"x3 3/8"x70 1/2" (24x86x1789)

Ëˤ

ʹɮˠʺ

NJ®ǻrNJ

Ëˣ

ʹɮˠʺ

NJ®ǻrNJ

H100391

(x24)

SCREW PFH BLK

8x2

H100200

(x8)

SCREW PFH BLK

8x1 1/2

NOTE JOINT

rˠ

ʹɮˣʺ

NJ®ǻrNJ

NOTE JOINT

ˢ˨ˠ

ʹɮˣʺ

ǢNNJrɟ˚ˡ˃ ˡ˟˟

ʹɮˣʺ

ǢNNJrɟ˚ˠˠˀˡ˃

Ëˣ

ʹɮˠʺ

NJ®ǻrNJ

Ëˤ

ʹɮˠʺ

NJ®ǻrNJ

Ëˢ

ʹɮˠʺ

®ǢNÝ

SIDE VIEW

ALIGN PILOT HOLES

ON BOTH ENDS.

Ëˡ

ʹɮˠʺ

®ǢNÝ rˠ

ʹɮˣʺ

NJ®ǻrNJ

26

ˢ˨ˠ

ʹɮ˧ʺ

ǢNNJrɟ˚ˡ˃

Ëˡ

ʹɮˠʺ

®ǢNÝ

Ëˢ

ʹɮˠʺ

®ǢNÝ

GAZEBO ASSEMBLY

E3

(x8)

SHEATHING BOARD - W4L13341

1 3/8"x3 3/8"x73 1/4" (36x86x1861)

E4

(x8)

SHEATHING BOARD - W4L13342

1 3/8"x3 3/8"x45 3/4" (36x86x1161)

COMPLETE THIS STEP TWICE

11' 3/4"

[3.4 m]

Ǣǻrƻˠ

0

H100379

(x16)

T-NUT BLK

5/16

H100459

(x16)

BOLT WH BLK

5/16x1 1/4

H100391

(x32)

SCREW PFH BLK

8x2

H100198

(x16)

WASHER LOCK

EXT BLK

8x19

11' 3/4"

[3.4 m]

rˣ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^ rˢ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^ rˣ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^ rˢ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^ ˠ˨˧

ʹɮ˧ʺ

ɟǢËrNJ˚˧ɮˠ˨ ˣˤ˨

ʹɮ˧ʺ

Dŷĵǻ˚ˠˠˀˣ˃

27

ˢ˦˨

ʹɮ˧ʺ

ǻ˚ŗȕǻ˚ˤˀˠ˥˃ ˢ˨ˠ

ʹɮ ˠ˥ ʺ

ǢNNJrɟ˚ˡ˃ rˢ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^ rˣ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^ rˢ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^ rˣ

ʹɮˠʺ

ǢËrǻËÝŗµ

DŷNJ^

GAZEBO ASSEMBLY

Ǣǻrƻˠ

1

NOTE:

USE THIS PAGE TO FAMILIARIZE YOURSELF WITH THE ROOF PANEL & ASSIST YOU IN THE COMING STEPS.

WARNING:

GLOVES SHOULD BE WORN WHEN HANDLING ROOF PANELS; EDGES ARE SHARP.

• Note the pre-drilled holes on the top end of each sheet shown below. These holes will always go towards the ridge of the roof and will be used to install the ridge cap in a later step. Assemble each roof panel by starting on the right side and working toward the left as shown.

POSITION YOUR ROOF PANELS ON THE GROUND SO THEY MIRROR EACH OTHER AS SHOWN.

REMOVE PROTECTIVE BLUE FILM FROM PANELS.

STARTING EDGE OF ROOF

SHEETING FLARES UP AS

SHOWN.

TOP VIEW

RIDGE

STARTING EDGE

INSTALLED

28

GAZEBO ASSEMBLY

A4M01124

(x2)

29 GA STEEL SHEETING

Ǣǻrƻˠ

2

H100760

(x8)

SCREW

WOODGRIP

10x1 1/4

1/4 in

[7 mm]

1/8 in

[4 mm]

HOLD SHEETING

INSIDE OF FRAME

ŗŷǻrʲ

MAKE SURE YOUR ROOF PANEL IS

SQUARE BEFORE MOVING ON.

ˠˡˣ

ʹɮˡʺ

ˡ˨µǢǻrrĵǢËrrǻÝŗµ

˦˥˟

ʹɮ˧ʺ

ǢNNJrɟ˚ˠˠˀˣ˃

NOTE THRU HOLES

NOTE RIB OVERLAP

FLUSH SHEETING

29

GAZEBO ASSEMBLY

˦˥˟

ʹɮˡˣʺ

ǢNNJrɟ˚ˠˠˀˣ˃

Ǣǻrƻˠˢ

H100760

(x24)

SCREW

WOODGRIP

10x1 1/4

SHEATHING BOARD

30

GAZEBO ASSEMBLY

A4M01124

(x2)

29 GA STEEL SHEETING

Ǣǻrƻˠˣ

H100760

(x32)

SCREW

WOODGRIP

10x1 1/4

1/8 in [3 mm]

HOLD SHEETING INSIDE OF FRAME

˦˥˟

ʹɮˢˡʺ

ǢNNJrɟ˚ˠˠˀˣ˃

NOTE HOLE LOCATIONS

NOTE RIB OVERLAP

ˠˡˣ

ʹɮˡʺ

ˡ˨µǢǻrrĵǢËrrǻÝŗµ

FLUSH ENDS OF SHEETING

REPEAT STEPS 12 THROUGH 14 FOR THE OTHER SIDE.

31

GAZEBO ASSEMBLY

A4M00983

(x2)

ROOF EDGE TRIM SPLICE

A4M00982

(x4)

ROOF EDGE TRIM

COMPLETE THIS STEP TWICE ǻÝƻʲ

DUE TO MULTIPLE LAYERS OF METAL ON THE

EDGE TRIM, IT IS RECOMMENDED THAT A 1/8"

DRILL BIT IS USED TO CREATE STARTER HOLES.

Ǣǻrƻˠˤ

H100759

(x16)

SCREW TAPPING

1/4x3/4

ŗŷǻrʲ

SCREWS GO THROUGH EDGE TRIM INTO THE TOP

OF THE RIBS IN THE APPROXIMATE LOCATIONS SHOWN.

FLUSH

˨˧ˡ

ʹɮˠʺ

NJŷŷ®r^µrǻNJÝō

˦ˤ˨

ʹɮ˧ʺ

ǢNNJrɟ˚ˢˀˣ˃ ŗŷǻrʲ

SLIDE EDGE TRIM INTO SPLICE.

ENSURE THAT BOTH ENDS ARE FLUSH

WITH EDGE OF ROOF PANELS.

˨˧ˡ

ʹɮˠʺ

NJŷŷ®r^µrǻNJÝō

˨˧ˢ

ʹɮˠʺ

NJŷŷ®r^µrǻNJÝōǢƻĵÝNr

SIDE VIEW

32

GAZEBO ASSEMBLY

Ǣǻrƻˠ˥

H100391

(x4)

SCREW PFH BLK

8x2

ŗŷǻrʲ

WITH AT LEAST TWO PEOPLE LIFT ASSEMBLED ROOF PANEL

AND SLIDE IT INTO THE TRACKS ON THE RAFTERS. ONCE IN

PLACE, INSTALL ATTACHMENT HARDWARE AS SHOWN.

COMPLETE THIS STEP TWICE

22 ' 4

6 9

5 1 ( 6

SLIDE ROOF

PANEL UPWARD.

THEN INSTALL

HARDWARE.

ǻÝƻʲ

A THIRD PERSON IS HELPFUL TO ATTACH

ROOF ONCE IT IS IN PLACE.

33

ˢ˨ˠ

ʹɮˡʺ

ǢNNJrɟ˚ˡ˃

GAZEBO ASSEMBLY

Ǣǻrƻˠ˦

H100407

(x3)

BOLT WH BLK

5/16x1 1/2

H100198

(x3)

WASHER LOCK

EXT BLK

8x19

H100199

(x3)

WASHER LOCK

EXT BLK

12x19

H100192

(x3)

NUT BARREL

WH BLK

5/16x7/8

ˠ˨ˡ

ʹɮˢʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃ ˠ˨˨

ʹɮˢʺ

ɟǢËrNJ˚ˠˡɮˠ˨

34

ˣ˟˦

ʹɮˢʺ

Dŷĵǻ˚ˠˠˀˡ˃ ˠ˨˧

ʹɮˢʺ

ɟǢËrNJ˚˧ɮˠ˨

GAZEBO ASSEMBLY

A4M01148

(x2)

TRUSS

BRACKET

Ǣǻrƻˠ˧

H100354

(x4)

BOLT WH BLK

5/16x6 1/2

H100378

(x2)

BOLT WH BLK

5/16x1 3/4

H100192

(x2)

NUT BARREL

WH BLK

5/16x7/8

H100770

(x4)

WASHER FLAT BLK

5/16

H100479

(x4)

NUT LOCK BLK

5/16

ˠ˨ˡ

ʹɮˠʺ

ŗȕǻDNJNJrĵ˚˦ˀ˧˃ ˢˤˣ

ʹɮˡʺ

Dŷĵǻ˚˥ˠˀˡ˃ ˣ˦˨

ʹɮˡʺ

ŗȕǻ˚ˤˀˠ˥˃

˦˦˟

ʹɮˡʺ

ɟǢËrNJ˚ˤˀˠ˥˃ ˢ˦˧

ʹɮˠʺ

Dŷĵǻ˚ˠˢˀˣ˃ ˠˣ˧

ʹɮˠʺ

ǻNJȕǢǢDNJNħrǻ

REPEAT ON OTHER SIDE

35

GAZEBO ASSEMBLY

A4M01155

(x4)

TIE BRACKET

Ǣǻrƻˠ˨

H100797

(x16)

SCREW PWH BLK

8x1

36

ˠˤˤ

ʹɮˣʺ

ǻÝrDNJNħrǻ

˦˨˦

ʹɮˠ˥ʺ

ǢNNJrɟ˚ˠ˃

GAZEBO ASSEMBLY

Ǣǻrƻˡ˟

A4M01127

(x1)

RIDGE CAP SPLICE

RIDGE CAP ASSEMBLY PREPARATION ŗŷǻrʲ

INSTALL THE PROVIDED RIDGE CAP

SPLICE BY SLIDING EACH RIDGE CAP INTO

THE SPLICE AS SHOWN UNTIL CENTERED.

A4M01116

(x2)

RIDGE CAP 29 GA ˠˠ˥

ʹɮˠʺ

NJÝ^µrNƻˡ˨µ ˠˠ˥

ʹɮˠʺ

NJÝ^µrNƻˡ˨µ ˠˡ˦

ʹɮˠʺ

NJÝ^µrNƻǢƻĵÝNr

37

GAZEBO ASSEMBLY

J10

(x2)

RIDGE CAP STIFFENER - W4L13591

1"x2 3/8"x69 1/4" (24x60x1760)

J9

(x2)

RIDGE CAP STIFFENER - W4L13590

1"x2 3/8"x47 5/8" (24x60x1210)

A6P00398

(x2)

RIDGE CAP PROTECTOR ŗŷǻrʲ

REMOVE SPACERS AS SHOWN

BEFORE INSTALLING.

RIDGE CAP FROM PREVIOUS STEP

TOP VIEW

117 in

[2974 mm]

MAX WHEN ASSEMBLED

BOTTOM VIEW

Ǣǻrƻˡˠ

H100833

(16)

SCREW WOODGRIP

10x3/4

ŗŷǻrʲ

ASSEMBLE BY ALIGNING THE HOLES ON EACH

RIDGE CAP TO THE HOLES IN THE RIDGE CAP

SPLICE TO ENSURE THAT THE OVERALL

LENGTH IS 117 1/16" MAX.

ğ˨

ʹɮˠʺ

NJÝ^µrNƻǢǻÝ®®rŗrNJ ğˠ˟

ʹɮˠʺ

NJÝ^µrNƻǢǻÝ®®rŗrNJ

TOP VIEW ğˠ˟

ʹɮˠʺ

NJÝ^µrNƻǢǻÝ®®rŗrNJ ğ˨

ʹɮˠʺ

NJÝ^µrNƻǢǻÝ®®rŗrNJ ˢ˨˧

ʹɮˠʺ

NJÝ^µrNƻƻNJŷǻrNǻŷNJ ˢ˨˧

ʹɮˠʺ

NJÝ^µrNƻƻNJŷǻrNǻŷNJ

˧ˢˢ

ʹɮˠ˥ʺ

ǢNNJrɟ˚ˢˀˣ˃

38

GAZEBO ASSEMBLY

117 in [2974 mm]

RIDGE CAP ASSEMBLY FROM PREVIOUS STEP

RIDGE CAP ASSEMBLY

FROM PREVIOUS STEP.

Ǣǻrƻˡˡ

H100392

(x16)

SCREW PWH BLK

8x3/4

ŗŷǻrʲ

USING AN ADULT HELPER, SLIDE

RIDGE CAP ASSEMBLY CAREFULLY

ACROSS THE ROOF RIDGE UNTIL

BOTH ENDS SIT INSIDE RAFTERS

AS SHOWN.

ŗŷǻrʲ

RIDGE CAP ASSEMBLY HAS BEEN DESIGNED

FOR SAFE INSTALLATION FROM A LADDER

AND NO ROOF ACCESS IS REQUIRED NOR

RECOMMENDED.

ǻÝƻʲ

FOR PROPER INSTALLATION, USE AN

ADULT HELPER TO KEEP DOWNWARD

PRESSURE ON THE RIDGE CAP

DURING SCREW INSTALLATION.

NOTE USE PILOT HOLES

TO ATTACH RIDGE CAP.

NOTE ALL SCREWS LAND

IN STIFFENER BOARDS.

ˢ˨ˡ

ʹɮˠ˥ʺ

ǢNNJrɟ˚ˢˀˣ˃

39

GAZEBO ASSEMBLY

A4M00950

(x8)

STEEL POST PLATE

A4M00949

(x8)

STEEL POST

ANCHORING

PLATE WITH

FLANGE

Ǣǻrƻˡˢ

H100471

(x32)

LAG SCREW

WH BLK

5/16x1 1/2

ˣ˦ˠ

ʹɮˢˡʺ

ĵµǢNNJrɟ˚ˠˠˀˡ˃

˨ˤ˟

ʹɮ˧ʺ

ǢǻrrĵƻŷǢǻƻĵǻr

˨ˣ˨

ʹɮ˧ʺ

ǢǻrrĵƻŷǢǻŗNËŷNJÝŗµƻĵǻrɟÝǻË®ĵŗµr

40

GAZEBO ASSEMBLY

A100241

(x1)

BYD ID TAG (SMALL) WITHOUT AGES

A100314

(x1)

"A" REVISION TAG

Ǣǻrƻˡˣ

H100200

(x4)

SCREW PFH BLK

8x1 1/2

ˡˣˠ

ʹɮˠʺ

Dɳ^Ý^ǻµ ˡ˟˟

ʹɮˡʺ

ǢNNJrɟ˚ˠˠˀˡ˃

FRONT

REAR

41

ˢˠˣ

ʹɮˠʺ

NJrəÝǢÝŷŗǻµ ˡ˟˟

ʹɮˡʺ

ǢNNJrɟ˚ˠˠˀˡ˃

GAZEBO ASSEMBLY

Ǣǻrƻˡˤ

H100120

(x16)

SCREW CONCRETE ANCHOR

1/4x2

ŗŷǻrʲ

MANUFACTURER RECOMMENDS INSTALLATION ON

CONCRETE SURFACE OR CONCRETE POST PADS. SEE BELOW.

FOR INSTALLATION ON WOOD DECK, YOU MUST ENSURE

THERE IS AMPLE STRUCTURAL SUPPORT UNDER DECK.

HARDWARE NOT INCLUDED.

H100630

(x16)

WASHER FLAT BLK

8x19

ˠˡ˟

ʹɮˠ˥ʺ

ǢNNJrɟ˚ˡ˃

˥ˢ˟

ʹɮˠ˥ʺ

ɟǢËrNJ˚˧ɮˠ˨ ŗŷǻrʲ

PRE-DRILL HOLES FOR CONCRETE ANCHORS

USING A 3/16" CONCRETE DRILL BIT.

42

GAZEBO ASSEMBLY

9205413

(x1)

ELECTRICAL ENCLOSURE

Ǣǻrƻˡ˥

H100966

(x4)

SCREW RAISED HEAD

8x1 1/2

(INCLUDED WITH ELECTRICAL ENCLOSURE)

REFER TO ELECTRICAL ENCLOSURE

MOUNTING INSTRUCTIONS.

43

˨˥˥

ʹɮˣʺ

ǢNNJrɟ˚ˠˠˀˡ˃ ˣˠˢ

ʹɮˠʺ

rĵrNǻNJÝNĵrŗNĵŷǢȕNJr