Mega Lite COLORPAC 150N Owner Manual

USER MANUAL

Table of Contents

Safety Information …………………………………………………..…3

Specifications …………………………………………………………..

4

Main Power Connection ……………………………………………..

5

IR Controller ………….……………………………………………......

5

Main Control Menu.........................................................................

6

DMX Profile....................................................................................

8

Wireless DMX Set Up …………………………………………………10

Rigging the Fixture ……………………………...……………………..11

Cleaning & Maintenance.................................................................11

Parts List.........................................................................................11

Check that the unit has not been damaged during transport

Protection Against Fire

1.

Maintain a minimum of 1 foot distance from any type of flame.

3.

Replace fuse only with the specified type and rating.

4.

Do Not install the unit to close to a heat source.

5.

Make sure cable are properly secured

6.

Maximum surface operating temperature 140 º.

Protection Against Fire

1.

Disconnect power before servicing.

2.

For connection to main power supply proceed to page 5.

3.

This unit must be earthed. (electronically grounded)

4.

Ip 64 do not submerge into water.

5.

Do not leave fixture on for long periods of time.

Protection Against Mechanical Hazards

1.

Use safety chain when hanging unit.

2.

Use quality clamps or bolts when positioning unit

3.

Do not open unit while it is on, risk of electrical shock.

3

Technical Information

Part Numbers

7310 – Color PAC 150 N Black Housing

7311 – Color PAC 150 N White Housing

Mechanical Specifications

DMX Wireless:

Thermal:

W DMX

Maximum ambient temperature 104°

Maximum surface temperature 140°

Fastening System:

Single Mounting Yoke

Display:

Touch Sensitive

Power connection:

DC Connection

Ip Rating;

Ip 64

5.75”

2.55”

Fixture Packaged

Size: 7” x 5.75” x 2.55”

Weight: 3lb

Size: 10.5” X 8.5” X 4.75”

Weight: 5 lb

Electrical Specifications

LED Quantity:

LED Watt:

Color Type:

LED Lifetime:

1

15

Red, Green , Blue and White

*

60 to 100 thousand hours Average

LED Angle:

Ballast:

Power Input Voltage:

Power Consumption

Control & Programming

DMX 512 Protocol via W DMX

DMX Modes:

Control Options:

Mode 1 3 Channels

Mode 2 4 Channels

Mode 3 5 Channels

Mode 4 7 Channels

Mode 5 8 Channels

IR Controller (included)

Battery Life

Red, Green, Blue

Red, Green, Blue, White

Dimmer, Red, Green, Blue, White

Dimmer, Red, Green, Blue, White, Strobe, Macro

Dimmer, Red, Green, Blue, White, Strobe, Macro, Dimming Curve

Photometrics

Average Battery Life:

High Mode:

Full Color:

Color Fading:

Single Color:

Battery Cycle Life:

Battery Type:

4:45 Hr

8:00 Hr

15:00 Hr

500 Recharges

Li Ion 5200mAh 11.1V

Low Mode:

Full Color:

Color Fading:

Single Color:

8:10 Hr

14:00 Hr

25:40 Hr

Photometrics at 10Ft

7”

10°

External Power Supply

110V 240 50/60 Hz

Watts: 10

Amps: .17

4

* Average expected LED life per LED manufacture

Main Power Connection

Caution!

1.

Do not connect fixture to a dimmer system.

2.

This unit has Auto switching power supply. It will respond to 110V or 220V automatically

3.

This unit must be earthed. (electronically grounded)

The occupation of the connection cable is as follows:

This fixture is equipped with an electronic power supply that will let the unit operate from 90V to 240V from 50Hz to

Cable (USA) Cable (EU) Pin 110V 220V

Black

White

Green

Brown

Light Blue

Yellow/Green

Live

Neutral

Ground

L

N

L

L

110V

Connection

N L

220V

Connection

L L

IR Controller

To Enter IR control mode you must press On. And the fixture can ’ t be set to

Wireless DMX Control mode

IR Controller Functions

1.

On/Off Function= Red On, Black Off

2.

Dimmer Function=Up/Down

3.

Single Color=

R

ed,

G

reen,

B

lue,

W

hite

4.

Mixed Color= 12 options

5.

Flash= Fast Color Change

6.

Strobe= Strobe the sected color

7.

Fade= Fade between colors

8.

Smooth=Smooth Color Fade

Note: IR Controller should be pointed directly at fixture output.

5

Display Menu

The control board on the fixture is your interface to access and control all the functions on the unit. Its digital display gives you a code view of the options and functions. The following will explain each function and its options.

CONTROL BOARD

DMX Address

DMX Mode Color Jump

Fade

1 512

3,4,5,7,8 Ch

0 99

Power Save Display Lock Software

0 99

Hi,Low

Off,On Ve

Strobe

Red Dimmer Green Dimmer Blue Dimmer White Dimmer Display Screen Dimming Mode

0 99

0 255 0 255

0 255

0 255 0F10,30,60 or 90 0 4

Use the Menu Button to select Menu options

DMX Address

ID

Press

Enter

to select the DMX start channel use the

up/down

keys, display will be flashing once you have selected the desired start channel Press

Enter

to confirm display will stop flashing.

DMX Mode

This function allows you to select the mode in witch you want to control the fixture. Press

Enter

use the

up/down

keys to select desired DMX mode settings. Press

Enter

to confirm the settings.

3CH Mode R,G,B

4CH Mode R,G,B,W

5CH Mode Dimmer,R,G,B,W

7CH Mode Dimmer,R,G,B,W, Strobe, Macro

8CH Mode Dimmer,R,G,B,W, Strobe, Macro, Dimming Curve

Color Jump

This function allows you to Switch Colors LED ’ s from one color to another. Press

Enter

use the

up/down

keys to select desired fade speed settings from 0 to 99. Press

Enter

to confirm the settings.

Fade Scroll

This function allows you to fade the LED ’ s from one color to another. Press

Enter

use the

up/down

keys to select desired fade speed settings from 0 to 99. Press

Enter

to confirm the settings.

6

Flash

This function allows you to strobe all the LED ’ s. Press

Enter

use the

up/down

keys to select desired strobe speed settings from 0 to 99. Press

Enter

to confirm the settings.

Red Dimmer

This function allows you to dim up or down the red LED ’ s . Press Enter use the

up/down

keys to select desired dimmer settings. Press

Enter

to confirm the settings.

Green Dimmer

This function allows you to dim up or down the green LED ’ s . Press Enter use the

up/down

keys to select desired dimmer settings. Press

Enter

to confirm the settings.

Blue Dimmer

This function allows you to dim up or down the blue LED ’ s . Press

Enter

use the

up/down

keys to select desired dimmer settings. Press

Enter

to confirm the settings.

White Dimmer

This function allows you to dim up or down the white LED ’ s . Press

Enter

use the

up/down

keys to select desired dimmer settings. Press

Enter

to confirm the settings.

Display Screen

This function allows you to set the display turn off time. Press

Enter

use the

up/down

keys to select desired turn off time settings from 10,30,60 and 90 seconds. Press

Enter

to confirm the settings.

Dimming Mode

This function allows you to change dimming speeds all the LED ’ s. Press

Enter

use the

up/down

keys to select desired dimming speed settings from 0 to 4 (0 fastest 4 slowest). Press

Enter

to confirm the settings.

Power Save

This function allows you to place the fixture on power save mode for extending the battery life. Press

Enter

use the

up/ down

keys to select desired intensity output from Hi to Low. Press

Enter

to confirm the settings.

7

Lock

This function allows you to lock the fixture display. Press

Enter

use the

up/down

keys to select desired strobe speed settings from Off to On. Press

Enter

to confirm the settings. To unlock press and hold

enter

and

down

for 3 seconds.

Software Version

This function informs you software version the units is operating under.

DMX Profile

Color Pack 150N 3CH Mode

DMX Chanel Function Description

1 LED Color Red LED intensity

2

3

LED Color

LED Color

Green LED Intensity

Blue LED Intensity

Color Pack 150N 4CH Mode

DMX Chanel Function Description

1

2

3

4

LED Color

LED Color

LED Color

LED Color

Red LED intensity

Green LED Intensity

Blue LED Intensity

White LED Intensity

Color Pack 150N 5CH Mode

DMX Chanel Function Description

1

1

2

3

4

Dimmer

LED Color

LED Color

LED Color

LED Color

Dimmer

Red LED intensity

Green LED Intensity

Blue LED Intensity

White LED Intensity

Color Pack 150N 7CH Mode

DMX Chanel

1

Function

Dimmer

Description

Dimmer Off to Full

2

3

4

5

6

LED Color

LED Color

LED Color

LED Color

Strobe

Red LED intensity

Green LED Intensity

Blue LED Intensity

White LED Intensity

No Function

Strobe (slow to fast)

Random Strobe (slow to fast)

Value

0 255

0 255

0 255

Value

0 255

0 255

0 255

0 255

Value

0 255

0 255

0 255

0 255

0 255

Value

0 255

0 255

0 255

0 255

0 255

0 1

2 196

197 255

Init

255

255

255

Init

255

255

255

255

Init

255

255

255

255

255

Init

255

255

255

255

255

0

8

7 Macro

No Function

Color fade All (slow to fast)

Color Snap All (slow to fast)

Random Color Snap (slow to fast)

Red fade (slow to fast)

Green fade (slow to fast)

Blue fade (slow to fast)

White fade (slow to fast)

Macro Effect 1

Macro Effect 2

Macro Effect 3

Macro Effect 4

Macro Effect 5

Macro Effect 6

Macro Effect 7

Color Pack 150N 8CH Mode

DMX Chanel

1

Function

Dimmer

Description

Dimmer Off to Full

8

7

2

3

4

5

6

LED Color

LED Color

LED Color

LED Color

Strobe

Macro

Dimming

Curve

Red LED intensity

Green LED Intensity

Blue LED Intensity

White LED Intensity

No Function

Strobe (slow to fast)

Random Strobe (slow to fast)

No Function

Color fade All (slow to fast)

Color Snap All (slow to fast)

Random Color Snap (slow to fast)

Red fade (slow to fast)

Green fade (slow to fast)

Blue fade (slow to fast)

White fade (slow to fast)

Macro Effect 1

Macro Effect 2

Macro Effect 3

Macro Effect 4

Macro Effect 5

Macro Effect 6

Macro Effect 7

Use Display Setting

Dimming 0

Dimming 1

Dimming 2

Dimming 3

Dimming 4

0 1

2 19

20 39

40 59

60 79

80 99

100 119

120 139

140 159

160 179

180 199

200 219

220 229

230 249

250 255

Value

0 255

0 255

0 255

0 255

0 255

0 1

2 196

197 255

0 1

2 19

20 39

40 59

60 79

80 99

100 119

120 139

140 159

160 179

180 199

200 219

220 229

230 249

250 255

0 5

6 55

56 105

106 155

156 205

206 255

0

0

0

Init

255

255

255

255

255

0

9

Wireless DMX Setup

Wireless DMX Status

Remaining battery life

Wireless On/Off

Menu

Enter

Wireless ID Set

Up

Down

DMX Signal Indicator IR receiver

Turn On:

Turn on the Wireless function by pressing the wireless On/Off to on.

Release Fixture:

To release the fixture from the connection of a previous signal. Press and hold the

ID

button for 3 seconds or until all 3 color indicators will turn on red, green and blue.

Connect Fixture using a Mega Air Pro Transmitter:

To connect the fixture to a new connection. Press quickly the

Function

button on the Mega Air Pro Transmitter. The red, green and blue indicators will flash until signal is locked in.

Once signal is located the indicator will slowly flash to Green.

Connect Fixture using a Color Pac DMX Controller:

To connect the fixture to a new connection. Turn on the wireless function on the controller. Press quickly the ID button on the Color PAC DMX Controller. The red, green and blue indicators will flash until signal is locked in. Once signal is located the indicator will slowly flash to Green.

Note: Make sure the fixture is on DMX Mode with the correct start channel.

10

Rigging the fixture

Caution!

1.

The installations must be carried out by an authorized dealer or trained professional.

2.

Unit may cause severe injures if you have doubts concerning the safety do not install.

3.

Unit is to be 24inches away from flammable materials (decoration material)

4.

Use high quality installation equipment to hang unit.

When rigging a unit it is very important that you follow common safety procedures. Rigging requires extensive experience including but not limited to calculating working loads, material being used and periodic safety inspections. If you lack these qualifications, do not attempt the installation yourself, instead use a professional structural rigger.

When rigging the unit always be secured with a secondary safety attachment. The installation location of the fixture has got to be built in the way that it can hold 10 times the weight for 1 hour with out any harming. Installation should be checked at least one time a year by a skilled person.

Cleaning and Maintenance

Installation

M

aintenance:

The operator has to make sure that the unit is operating safely and has the installations and electronics checked by an expert every year.

The following points have to be considered during the inspection:

1) All screws used for installing the device or part of the device have to be tightly connected and must not be corroded.

2) There must not be any deformations on the housing, fixation and installation spots (ceiling, suspension, trussing).

3) The electronic power supply cables must not show any damages, material fatigue (e.g. porous cables) or sediments.

Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.

Note:

There is no serviceable parts inside the device. Maintenance and service operations are to be carried out by authorized dealers.

Replacing the fuse:

Only replace the fuse with the same type and rating.

Replacing the power cable:

If the power cable of this device becomes damaged, it has to be replaced by authorized dealers or trained professional only.

Should you have further questions , please contact your dealer.

Parts List

7310 FG

7310 MPCB

7310 PS

7310 DIS

7310 LEDMOD

7310 IRC

7310 KN

Front Glass

Main PCB card

Power Supply

Display

LED Module

IR Controller

Knob Set

Accessories

7316

7314

7315

7310 BD

7311 BD

7310 BAG

7310 10RC

Color Pac 150 DMX (wireless controller)

Color Pac 150 Ion (external battery blk)

Color Pac 150 Ion (external battery whi)

Barndoor Black

Barndoor White

4 Unit Travel Bag

10 Unit Road Case

7310 BD 7314

11

Warranty Information

Warranty Conditions

Unless otherwise stated in writing, your product is covered by a one year parts and labor limited warranty.

LEDs are not guaranteed to match in color temperature or output.

It is the owner ’ s responsibility to furnish receipts or invoices for verification of purchase, date, and reseller or distributor.

If purchase date cannot be provided, date of manufacture will be used to determine warranty period.

Goods returned under warranty must follow the proper authorization procedure and must be accompanied by a copy of the original invoice.

Goods repaired under warranty will be returned to the owner with the freight prepaid by MSI via the most economical means of shipment.

Repair or replacement as provided for under this warranty is the exclusive remedy of the consumer. MEGA SYSTEMS

INC. makes no warranties, express or implied, with respect to any product, and Mega Systems specifically disclaims any warranty of merchantability or fitness for a particular purpose. Mega Systems shall not be liable for any indirect, incidental or consequential damage, including lost profit, sustained or incurred in connection with any product or caused by product defect or the partial or total failure of any product regardless of the form of action, weather in contract, tort

(including negligence), strict liability or otherwise, and weather or not such damage was foreseen or unforeseen.

Warranty is void if the product is misused, damaged, modified in any way, or for unauthorized repairs or parts. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Mega

-

Lite

18668 Highway 16N

Helotes, TX 78023

Ph 210

-

684

-

2600 Fax 210

-

855

-

6279 www.mega

-

lite.com / info@mega

-

lite.com