3COM 35 SERIES IP PHONES
QUICK REFERENCE-6W100
Your 3Com IP Phone must be configured to work in an IP network. Typically, your administrator assigns IP parameters, including an IP address, phone extension and password, as part of the installation process.
Put a Call on Hold
While you are on a call, press Hold or OK button. To return to the call, press Unhold , or press OK button again.
Transfer a Call
For early announced transfer and announced transfer:
1) While you are on a call, press Transfer .
2) Dial the number to which you want to transfer the call.
3) When you hear ringback tone, press Transfer , or wait for the recipient to answer, announce the call, press Transfer , and hang up.
For an unannounced transfer:
1) While you are on a call, press Transfer .
2) Enter the number to which you want to transfer the call.
3) Press Transfer ,
Make a Conference Call
For early announced conference and announced conference:
1) Place or receive a call. Two parties are now on the call.
2) Press Conference .
3) Dial the third party, wait for that party to answer, and then press Conference again.
For an unannounced conference:
1) Place or receive a call. Two parties are now on the call.
2) Press Conference .
3) Enter the third party number.
4) Press Conference again.
Adjust the Volume
z z z
Handset — Lift the handset. Press the higher or lower volume control button.
Speaker — Press Speaker . Press the higher or lower volume control button.
Headset — During a call, press the higher or lower volume control button.
6W100-20110119
z Ringer — While the telephone is ringing, press the higher or lower volume control button.
Mute a Call
During a call, press the Mute button. The backlight of the button comes on. You can hear the caller but the caller cannot hear you. To cancel, press the Mute button again. If you switch between Handset, Headset and Speaker, Mute will be disabled too.
Log In/Log Out
z While logged in, press Menu + 4 , then press OK to log out of a phone. z To log in, press Menu + 4 , the screen will display the extension used last time, you can press Enter to accept the extension, or you can enter another phone number and z press Enter , then enter the password for your phone at the prompt.
To log in to a second VCX phone, log out of that phone. Press Menu + 4 , then press OK to log out of a phone. then use your extension to log in the second phone.
Calls made to your number will ring in both locations.
Forward Incoming Calls to Your Voice Mail
z z
On 3500/3500B/3501 IP Phones
Press Feature + 6 + 440 , all incoming calls ring once and then go to your voice mail message box. To cancel, press Feature + 6 + 440 again.
On 3502 and 3503 IP Phone
Press FWD MAIL . The backlight of the button comes on; all incoming calls ring once and then go to your voice mail message box. To cancel, press FWD MAIL again.
Switch Your Telephone to Do Not Disturb
Press the Do Not Disturb button (or press Feature + 6 + 446 ). The display shows Do
Not Disturb . All incoming calls go directly (without ringing the phone) to your call coverage point (by default, voicemail). To cancel, press the Do Not Disturb button or press Feature + 6 + 446 again.
Park a Call and Retrieve a Parked Call
1) While you are on a call, press the Call Park button, or if Call Park is not assigned to an
Access button, press Feature + 6 + 444 .
2) Enter one of the extensions reserved for Call Park or press the Call Park button again to use the default Call Park extension. The default Call Park numbers are 800 through
899, inclusive. The Call Park extension will be displayed on the screen for a moment, please record it. z The call is parked until someone retrieves it, the caller hangs up, or the Call Park z timer expires (the default is 5 minutes).
If the extension you chose is busy, the system assigns another Call Park extension. z If the Call Park timer expires, the system rings the extension that parked the call.
To retrieve a parked call, dial the Call Park extension where the call was parked.
6W100-20110119
Dial from the Telephone Display Panel
1) Pick up the handset, and then press the Call History button or press Feature + 6 + 462 .
2) On the Display Panel, use the arrow keys to scroll through the list: Received Calls,
Missed Calls, Placed Calls, Clear All Logs.
3) Press the button associated with the list option whose entries you want to view.
4) Press one of the buttons below the Display Panel: z To view the detail information of the call, press Detail . z z z
To delete the call log, press Delete .
To select a call from the list and automatically dial it, press Dial .
To see the previous menu, press Back .
Other VCX Phone Features
For information about other features such as Speed Dialing, Call Forwarding
Destinations, Bridge Extensions, and Controlling Caller ID, see the 3Com 350x Series
IP Phones Quick Installation Guide or the VCX User web interface.
Initialize Your Voice Mailbox
z Pick up the handset and press button and follow the voice prompts to set up your mailbox number and create a password. z Follow the voice prompts to record a name announcement and personal greeting.
The mailbox is ready to use.
Access Your Mailbox
From Your VCX Telephone
1) Pick up the handset and press button.
2) Enter your password.
3) Follow the prompts to listen to your messages. If you have no messages, the voice prompt presents the Main menu.
From Any Internal VCX Telephone
1) Pick up the handset and press button.
2) At the password prompt, press *.
3) At the next prompt, enter your extension number.
4) Enter your password.
From Any External Telephone
If you can dial your telephone extension directly:
1) Press * during your greeting.
2) At the prompts, enter your password.
If you dial your organization’s main telephone number:
1) If the Automated Attendant answers, press * * during the greeting. At the prompts, enter your extension and password.
6W100-20110119
2) If the receptionist answers, ask to be transferred to your voice mail. Press * during your greeting. At the prompts, enter your extension and password.
Retrieve Messages
If the MWI light flashes, it indicates that you have unheard message.
1) Pick up the handset and press button.
2) At the prompt, enter your password.
3) Press 1 to access the Messages menu.
4) From the Messages menu: z Press 1 for new messages. z Press 2 for saved messages. z Press 3 for deleted messages.
5) From the New, Saved, or Deleted Messages menu: z z
Press 1 to listen to a message.
Press 2 to save a message. z z z z z
Press 3 to delete a message.
Press 4 to reply to a message.
Press 5 to access the Message Options menu.
Press 6 to forward a message.
Press 7 to replay the last 10 seconds of a message. z z z z z
Press 8 to pause the message for 10 seconds.
Press 9 to fast-forward 10 seconds in the message.
Press 0 to access Help.
Press # to move to the next message.
Press * to return to the previous menu.
Reply to a Message
1) From the New, Saved, or Deleted Messages menu, press 4 , and then 1 .
2) At the prompt, press # to record an announcement for the recipient of the message.
3) Press # at the end of the recording.
4) At the prompt, enter the destination extension.
5) Press # to send the message.
Forward a Message
1) From the New, Saved, or Deleted Messages menu, press 6 .
2) At the prompt, enter a destination number and press #.
Mailbox Options
1) Pick up the handset and press button.
2) At the prompt, enter your password.
3) From the Main menu, press 9 .
4) From Setup Options menu, press 1 .
5) From the Mailbox Setup and Greetings menu: z Press 1 to change your password.
6W100-20110119
z Press 2 to record, review, rerecord, or delete a normal, busy, or extended absence greeting. z Press 3 to manage scheduled personal greetings. z Press 4 to record and review your name announcement. z Press 6 to modify what you hear as you review messages. z Press 9 to set up print options.
For more information about these and other features, see the IPM User Guide .
Copyright © 2011 3Com Corporation. All Rights Reserved.
3Com registered trademarks are registered in the United States and may or may not be registered in other countries.
3Com and the 3Com logo are registered trademarks and VCX is a trademark of 3Com Corporation. Other brand and product names may be registered trademarks or trademarks of their respective holders.
6W100-20110119
