Adobe ILLUSTRATOR 6.0 Online Manual

PDF

Документ

List of topics

Menu commands

Toolbar

Index

How to use this guide

List of topics

Basic concepts

Viewing and setting up documents

Drawing

Moving and aligning objects

Modifying shapes and applying special effects

Painting

Creating custom colors, gradients, and patterns

Using layers

Using type

Using graphs

Importing and exporting artwork

Printing documents

Producing color separations

Error messages and troubleshooting

What’s new in 6.0

Basic Concepts

Bitmap images and vector graphics

Opening documents

Saving documents

Setting preferences

Using the toolbox and the plug-ins toolbox

Using the status bar

Using the Shortcuts palette

Correcting mistakes

Reverting to an earlier version of your document

Using plug-in modules

Bitmap images and vector graphics

Computer graphics fall into two main categories— bitmap images and vector graphics . Understanding the difference between these two types of graphics is useful when you’re creating and editing digital illustrations. (For more information on using these formats with Illustrator, see About graphic file formats .)

See also Bitmap vs. Vector graphics jump to art

Bitmap images

Bitmap images, such as those created in Adobe Photoshop, consist of a grid, or bitmap , of small squares, known as pixels . For example, a bicycle tire in a bitmap image is made up of a collection of pixels in that location, with each pixel part of a mosaic that together gives the appearance of a tire. When working with bitmap images, you edit pixels rather than objects or shapes.

Bitmap images are best used for working with continuous-tone graphics, such as photographs or images created in painting programs. Bitmap images are set at a fixed resolution—they are resolution dependent. This means that objects can appear jagged and lose detail if they are scanned or created at a low resolution (for example, at 72 pixels per inch) and then enlarged or printed at a higher resolution.

jump to art

Vector graphics

Vector graphics, such as those created in Adobe Illustrator, are made up of lines and curves defined by mathematical objects called vectors . For example, a bicycle tire in a vector graphic is made up of a mathematical definition of a circle filled with a specific color and set at a specific location. When you move, resize, or change the color of the tire, the program changes the mathematical definition of the shape or location of the tire, or the tire’s color.

Vector-based programs are best for type

(especially small type) and drawings that require crisp, clear lines regardless of the size to which they are scaled.

Graphics created in vector-based programs such as Illustrator always appear at the maximum resolution of the monitor or printer on which they are output— they are resolution independent.

jump to art

Bitmap vs. Vector graphics

Click on artwork to jump to information on that format.

4:1 zoom

16:1 zoom

Bitmap

4:1 zoom

16:1 zoom

Vector

Opening documents

When you start Adobe Illustrator, the program automatically opens a new document. You can also create a new document at any time, once Illustrator is running. In either case, a new document appears with the name Untitled art in its title bar.

You can open existing documents as well as create new ones. An existing document appears with its name displayed in the title bar.

Saving documents

You can save a document under its current name, location, and file format by using the Save command. If you are saving the document for the first time, the Save dialog box appears, enabling you to specify how and where you want to save the document.

By using the Save As command, you can save a copy of a document under a different name, location, or file format. For information on saving a document in a different file format or with a special preview option, see Exporting artwork .

To save a file:

1 Choose File

Save or File

Save As.

If you choose the Save As command, or if the document has not been saved before, choose any of the following options:

• Select the folder in which you want to save the document.

• Create a new folder by clicking New.

• Enter the name of the document in the

Save This Document As text box.

• From the Format pop-up menu, choose the file format in which you want to save the document.

2 If you save the document in EPS format, you can add Fetch® information.

Fetch is a program that searches for and retrieves files based on information about the file. Choose any of the following options:

• Select the Include Document Thumbnail option to create a thumbnail preview for the file when viewed by Fetch.

• Enter the author’s name in the Author text box.

• Enter any search keywords, separated by commas, in the Keywords text box.

• Enter any identifying information about the document in the Description text box.

3 Click Save.

Setting preferences

After you have used Illustrator for a while, you may develop preferences for the way in which various commands and tools work in the program. To accommodate different styles of working, Illustrator lets you set and save a wide variety of preferences. Any time you work in Illustrator, your saved preferences take effect, and tools and commands work the way you have specified.

To set preferences:

1 Choose File

Preferences and then choose the type of preference you want to change:

• The General Preferences dialog box contains preferences for how various commands and tools work.

• The Color Matching dialog box lets you coordinate the colors displayed by your monitor with the color system you choose.

• The Hyphenation Options dialog box defines which language dictionary is used and lets you specify any words you don’t want Illustrator to hyphenate.

• The Plug-ins dialog box lets you indicate where the plug-in modules are located.

General Preferences dialog box

Click on any option for information on that option.

return to text

Using the toolbox and the plug-ins toolbox

The first time you open a document, the toolbox appears on the left side of the screen. The toolbox contains the set of working tools with which you can create, select, and manipulate objects in Illustrator.

A further set of tools is available on the plug-ins toolbox. This second toolbox contains tools that can be provided by third-party developers. For more information about plug-ins, see Using plug-in modules .

To show or hide either toolbox:

Choose any of the following options:

• Choose Windows

Show Toolbox to display the standard tools.

• Choose Windows > Show Plug-in Tools to display the plug-in tools.

• Choose Windows

Hide Toolbox to hide the standard tools.

• Choose Windows

Hide Plug-in Tools to hide the plug-in tools.

To move either toolbox:

Drag it by the title bar.

See also

• Selecting tools

• Using the tool pointers

• Toolbox overview

Using the tool pointers

Many of the tools change the mouse pointer to an icon that indicates the function of the selected tool. For example, choosing the brush tool changes the pointer to a brush. You can also change any painting or editing tool pointer to a cross hair.

To change the pointer to a cross hair:

Choose one of the following options:

• While the tool is selected, press the

Caps Lock key on the keyboard.

• Choose File > Preferences > General, select the Use Precise Cursors option, and click OK.

jump to art

Selection

Hand

Pen

Brush

Oval

Measure

Rotate

Reflect

Paint Bucket

Gradient

Graph

Selecting tools

Select a tool from the default toolbox by clicking the tool. Select a hidden tool by positioning the pointer on the current tool in the toolbox and dragging to highlight the tool.

Click on any tool to jump to information on that tool.

Directselection

Zoom

Scissors

Freehand

Rectangle

Type

Scale

Shear

Eyedropper

Blend

Page

Group-selection

Add-anchor point

Delete-anchor point

Convert-direction point

Autotrace

Rounded-rectangle

Path-type

Area-type

Twirl

Star

Knife

Spiral

Polygon

None jump to art

Toolbox overview

Click on any artwork to jump to information on that tool.

The selection tool selects entire objects.

The direct-selection tool selects points or segments within objects.

The group-selection tool selects objects and groups within groups.

The hand tool moves the

Illustrator artboard within the document window.

The zoom tool increases and decreases the view in the document window.

The pen tool draws straight and curved lines to create objects.

Toolbox overview, continued

Click on any artwork to jump to information on that tool.

The scissors tool splits paths.

The add-anchor-point tool adds anchor points to paths.

The delete-anchor-point tool deletes anchor points from paths.

The convert-anchor-point tool changes smooth points to corner points and vice versa

The brush tool draws freehand lines of varying thickness.

The freehand tool draws freehand lines.

Toolbox overview, continued

Click on any artwork to jump to information on that tool.

The autotrace tool traces the outline of objects in a template.

The oval tool draws circles and ovals.

The rectangle tool draws squares and rectangles.

The b eeboppers bellow the blues in

B-flat on the b assoon, the b aritone and b ass

The rounded rectangle tool draws squares and rectangles with rounded corners.

The measure tool measures the distance between two points.

The type tool creates individual type and type containers and lets you enter and edit type.

Toolbox overview, continued

Click on any artwork to jump to information on that tool.

 

  

 



 



 





      n ri m p s

20-26 Av r i l

P d u e c a r e

The area-type tool creates individual type and type containers and lets you enter and edit type.

The path-type tool changes paths to type paths, and lets you enter and edit type on a type path.

The rotate tool rotates objects around a fixed point.

The scale tool resizes objects around a fixed point.

The reflect tool flips objects over a fixed axis.

The shear tool skews objects around a fixed point.

Toolbox overview, continued

Click on any artwork to jump to information on that tool.

The eyedropper tool samples paint attributes from objects.

The paint-bucket tool fills objects with the current paint attributes.

The gradient tool adjusts the beginning and ending points of gradients within ojbects nstrument 1994

1995

The blend tool creates a blend between the color and shape of two objects.

The graph tool creates graphs.

The page tool adjusts the page grid to control where artwork appears on the printed page.

Using the status bar

A status line is displayed at the bottom left edge of the Illustrator document window. The status line can display information about any of four different topics:

• The current tool in use

• The time and date

• The amount of free memory (RAM) available for your open document

• The number of undos and redos available

To specify the type of information you want to display in the status line:

1 Position the cursor over the status line bar and hold down the mouse button.

2 Drag to choose the type of information you want from the pop-up menu.

Using the Shortcuts palette

The Shortcuts palette displays a brief description of the function of all tools and keyboard shortcuts available in

Illustrator.

To use the Shortcuts palette:

1 Choose Show Shortcuts from the Help menu, located at the top right of the menu bar.

2 Click Forward or Back to go forward or backward one topic at a time.

Correcting mistakes

You can use the Undo command to correct mistakes you make while using the Adobe Illustrator program. You can even undo an operation after you have chosen the Save command (but not if you have closed and then reopened the file). If an operation cannot be undone, the Undo command is dimmed.

Depending on how much memory is available, you can undo up to 200 of the last operations you performed, in reverse order, by repeatedly choosing the Undo command. Illustrator’s performance is usually not affected by the number of undo levels you choose; however, if you are trying to display complex artwork, you may receive a message asking you to reduce the number of undo levels because of insufficient memory.

The default undo level is set at 10.

You can set the number of undo levels, between 0 and 200, in the General

Preferences dialog box.

To undo or redo an operation:

Choose Edit

Undo or Edit

Redo.

To change the maximum number of undo levels:

Choose File

Preferences

General, enter a value in the Undo Levels text box, and click OK.

Reverting to an earlier version of your document

The Revert to Saved command restores your document to the version that was last saved. You cannot undo this action.

To revert your document to the saved version:

Choose File

Revert to Saved.

Using plug-in modules

A plug-in is a software module that adds functions to the main program. A collection of plug-ins is installed in the Plugins folder within the Adobe Illustrator

6.0 folder. Third-party developers also can create plug-in modules; see

Creating plug-in modules for Adobe

Illustrator for more information.

Plug-ins work the same way that other functions in Illustrator work. In fact, in most cases, you cannot even tell which functions are part of the main Illustrator program and which are plug-ins.

When you install Adobe Illustrator and include plug-ins as part of the installation, these files are placed in the Plugins folder in the Adobe Illustrator folder.

If you change the location of these files or of the Plug-ins folder, you must use the Plug-ins preferences command to tell Illustrator about the new location of the plug-ins.

You can also use plug-ins from version

3.0.4 or later of Adobe Photoshop, and from Adobe Gallery Effects (included in the Adobe Illustrator Deluxe CD-ROM disc). In addition, you can use thirdparty plug-ins designed for Photoshop or Illustrator. (Plug-ins designed for

Photoshop display a Photoshop icon in the Illustrator menu.)

To install a plug-in module:

Drag the plug-in into the Adobe

Illustrator Plug-ins folder.

To specify the location of plug-in modules:

1 Choose File > Preferences > Plug-ins.

2 Select the folder containing the plugin modules and click the Select button at the bottom of the dialog box.

3 Quit Illustrator, and then start it again for the plug-in modules to take effect.

Tip: Make an alias to your Photoshop plug-in filters in your Illustrator Plug-ins folder, so you don’t have to duplicate your filters between the two programs.

Creating plug-in modules for Adobe

Illustrator

The open architecture of the Adobe

Illustrator program allows third-party developers to create features that are accessible from within Adobe Illustrator.

If you are interested in creating plug-in modules compatible with Adobe Illustrator, see the Adobe Systems Incorporated

Home Page at http://www.adobe.com.

You can also contact the Adobe Developers Association (ADA) by telephone. In the United States, call (415) 961-4111; in

Europe, call +31-20-6511 275. In addition, you can reach the ADA by e-mail at [email protected].

Viewing and Setting Up

Documents

Viewing modes

Previewing and printing patterns and placed EPS images

Moving the view of a document

Magnifying and reducing the view

Creating custom views

Displaying multiple views of a document

Using rulers

About the work area

Changing the artboard size

Aligning the artboard with the printed page

Choosing tiling options

Moving the page boundaries

Setting up standard and custom pages

Viewing modes

You have three views in which to display your artwork on-screen: Preview view

(the default), Artwork view, and Preview

Selection view.

Preview view Preview Selection view

Artwork view

To change the view:

Choose one of the following options:

• Choose View > Preview to view the artwork as it will be printed, filled with as many colors and as much shading and detail as your monitor is capable of displaying. Preview view is the default view when you open a new document, and the most used view because it best indicates what the finished artwork will look like.

• Choose View > Artwork to view objects in the artwork as wireframe outlines, hiding the paint attributes of the objects. Working in this view can speed up the display when you are editing complex artwork (such as objects containing gradients or patterns) that requires a long time to redraw on-screen. Artwork view can also make editing easier, because in this view objects are not easily hidden by other filled objects overlapping them.

Note: You can use the Artwork View

Speedup filter to speed up redrawing and editing in Artwork view. All artwork handles are displayed in black while editing in Artwork View with the Artwork

View Speedup filter in effect. To use the

Artwork View Speedup filter, place it into

Illustrator’s Plug-ins folder and restart

Illustrator. This filter does not appear on the menu, it is in effect whenever you are in Artwork view.

• Choose View

Preview Selection to view selected objects in Preview view and display unselected objects in

Artwork view. Selecting other objects in

Preview Selection view displays the newly selected objects with their paint attributes visible. This view is useful for speeding the artwork display when you want to view the objects you are editing as they will look when printed.

Previewing and printing patterns and placed EPS images

Placed EPS images from other applications and objects that are filled with patterns can slow performance when previewing and printing artwork.

The Show Placed Images option in the

Document Setup dialog box lets you choose whether placed EPS images display a 1-bit preview when seen in Artwork view. (For information on placed images, see Opening and placing artwork .)

The Preview and Print Patterns option in the Document Setup dialog box lets you specify whether patterns appear in your artwork when you preview or print your illustration. For information on patterns, see About custom colors, gradients, and patterns .

These options are on by default. Turn off these options when you need to work quickly—for example, when you are editing nonpatterned parts of the artwork. You can then turn these options back on when you want to view the finished art.

To determine how placed EPS images and patterns appear:

1 Choose File > Document Setup.

2 Choose any of the following options:

• Select or deselect the Show Placed

Images option.

• Select or deselect the Preview and

Print Patterns option.

3 Click OK.

Moving the view of a document

You can view different areas of a document using the scroll bars or the hand tool.

Moving the hand tool around on an Illustrator document is analogous to moving a piece of paper on a desk with your hand.

To scroll with the hand tool:

1 Select the hand tool .

2 Move the pointer onto the document and drag in the direction in which you want the document to move.

Tip: To scroll quickly with the hand tool while using another tool, hold down the spacebar and drag with the mouse.

Magnifying and reducing the view

The zoom-in and zoom-out tools and commands magnify or reduce the display of any area in the document up to

16 times. Zooming in and out changes only the magnification at which you see the document, not its actual size. (For more on resizing objects, see Scaling .)

Two other commands provide shortcuts to often-used magnification levels. The

Actual Size command lets you display a document at 100% magnification, and centers the document in the active window. The Fit In Window command centers and scales the artboard so that it fits within the active window.

The current magnification level is displayed at the top of the document window.

To zoom in:

Choose one of the following options:

• Select the zoom tool (the pointer becomes a magnifying glass with a plus sign in its center) and click at the center of the area you want to magnify.

Continue clicking until the document is magnified as desired. When the document has reached its maximum magnification level of 1600%, the magnifying glass appears blank.

• Choose View > Zoom In. Continue choosing this option until the document is magnified as desired. When the document has reached its maximum magnification level of 1600%, the command is dimmed.

Tip: To choose the zoom-in tool while using another tool, press Command+ spacebar. To chose the zoom-out tool while using another tool, press

Command+ Option+spacebar.

To zoom out:

Choose one of the following options:

• Select the zoom tool while holding down the Option key (the pointer becomes a magnifying glass with a minus sign in its center), and click at the center of the area you want to reduce.

Continue clicking until the document is magnified as desired. At the document’s maximum reduction level of 6.25%, the magnifying glass appears blank.

• Choose View > Zoom Out. Continue choosing this option until the document is magnified as desired. When the document reaches its maximum reduction level of 6.25%, the command is dimmed.

To magnify by dragging:

1 Select the zoom-in tool .

2 Drag to draw a dotted rectangle, called a marquee, around the area you want to magnify. To draw the marquee from the center, hold down the Control key as you drag. To move the marquee around the artwork, begin dragging a marquee, and then hold down the spacebar while dragging the marquee to a new location.

3 Release the mouse button.

To display a document at 100%:

Choose View

Actual Size, or doubleclick the zoom tool .

To scale the artboard to fit the window:

Choose View > Fit In Window, or doubleclick the hand tool .

Creating custom views

You may want to switch between several views while working on an Illustrator document. For example, you may want to set one view highly magnified for doing close-up work on some objects and create another view not as magnified for laying out those objects on the page. You can create and store up to 25 views of a document. When you save a view, the current zoom level, scroll position, layer options, and view

(that is, Artwork, Preview, or Preview

Selection) settings are retained and named so that you can call up the same view at any time.

200%, Preview view 400%, Preview view

To create a new view:

Set up the view that you want.

Choose View > New View.

3 Enter a name for the new view, and click OK.

The view names, along with keyboard shortcuts for accessing them, appear at the bottom of the View menu. To retrieve a view, select the name of the view you want to use.

To rename or delete a view:

1 Choose View

Edit Views.

2 Select the view you want to edit and rename it or click Delete.

Displaying multiple views of a document

You can display several views of the same document in separate windows.

For example, you can simultaneously view several magnification levels of one drawing. Because the windows are simply different views of the same document, editing artwork in any of the windows affects the artwork in all windows at the same time.

To open a new window:

Choose Window > New Window.

A new window of the same size appears on top of the previously active window.

The two windows are identical except for their window numbers. The title bar in the new window is highlighted, indicating that it is the active window.

Tip: Use the New Window command to preview in one window while editing in

Artwork view in another.

Using rulers

Illustrator can display rulers, one along the bottom and one along the right side of the document window.

When you open a new document, the rulers are not visible, but you can display them at any time. These rulers are a tool for placing and measuring objects in artwork accurately. As you scroll and zoom around the document, the rulers adjust accordingly.

To show or hide rulers:

Choose View > Show Rulers or View >

Hide Rulers.

See also

• Defining ruler units

• Automatically converting unit values in text boxes

• Changing the ruler origin

Defining ruler units

The large tick marks on the rulers indicate the unit of measure (such as inches), and the small tick marks indicate increments of the unit of measure

(such as 1/8 inch). When you magnify or reduce the document view, the increments of the unit of measure reflect the change in magnification.

The default units of measure for the rulers are points and picas. A point equals

1/72 of an inch; a pica equals 12 points, or 1/6 of an inch. You can change the unit of measure to inches or millimeters using the General Preferences dialog box or the Document Setup dialog box .

The unit of measure that you set for the rulers applies when you measure objects, move and transform objects, and create ovals and rectangles. It does not affect the units in the Character,

Paragraph, and Paint Style palettes, which always display size, leading, vertical shift, line width, and line dash in points. (See Setting type attributes for more information on units of measure for type.)

To set the unit of measure:

1 Choose one of two options:

• To change the unit of measure for all documents, choose File > General

Preferences.

• To change the unit of measure for the active document only, choose File >

Document Setup.

2 From the Ruler Units pop-up menu, drag to specify the unit of measure you want to use.

3 Click OK.

Automatically converting unit values in text boxes

If you use other than the preset unit to enter values, Illustrator converts it to the set unit. For example, entering “3 cm” in a text box set to inches converts the value to 1.181 inches.

You can also add, subtract, multiply, divide, and perform other mathematical operations in any Illustrator text box that accepts numeric values. Illustrator performs the calculation and uses the result.

For example, when specifying the size of a rectangle, you can type “72 pt +

2 pt” for the height. When you enter a value in a text box, you must indicate the units after each value (for example,

mm for millimeters, pt for points, and in for inches).

Parentheses are also allowed in expressions, and units can be added onto the resulting expression, as in “(4 + 5) in”.

Also, expressions can be arbitrarily complex, such as “((4 + 5) / 2) in +

16 in”.

Changing the ruler origin

The point where 0 appears on each ruler is called the ruler origin. When you open a document, the position of the ruler origin depends on the View option selected in the Document Setup dialog box . Generally, if you have selected either the

Single Full Page or the Tile Full Pages option, the default ruler origin is located at the lower left corner of page 1.

When you change the ruler setting, the new setting becomes the default for the document whenever that document is opened. You can change the origin for the rulers at any time. For example, you may be working on a 3-inch-by-5-inch card that is centered on an 8.5-inch-by-

11-inch page. Setting the ruler origin to line up with the 3-by-5-inch artwork rather than the 8.5-by-11-inch page can make precision editing easier for you.

Note: The position of the ruler origin affects the tiling of patterns, as well as the bounding box information for the

Separation Setup command. For more information about the bounding box, see Specifying the bounding box in the separation .

To change the ruler origin:

1 Move the pointer to the lower right corner of the rulers where the rulers intersect.

2 Drag the pointer to where you want the new ruler origin. As you drag, a cross hair in the window and in the rulers indicates the changing ruler origin.

3 Release the mouse button to set the new 0,0 point in the rulers.

8 0

8 16

About the work area

In Adobe Illustrator, the work area occupies the entire space within the

Illustrator document window, and includes more than just the printable page containing your artwork. The work area is made up of four sections:

• Imageable area

• Nonimageable area

• Artboard

• Scratch area jump to art

Imageable area

The imageable area is the area within the dotted lines representing the portion of the page on which the selected printer can print an image.

Many printers cannot print to the edge of the paper. jump to art

Nonimageable area

The nonimageable area is the area between the dotted and solid lines representing any nonprintable margin of the page. This example shows the nonimageable area of an 8.5" x 11" page for a standard laser printer.

jump to art

Artboard

The artboard is the area within the solid lines representing the region that can contain printable artwork. The artboard equals the imageable area plus any nonimageable area. By default, the artboard is the same size as the page, but it can be enlarged, as in the example shown.

The U.S. default artboard is 8.5" x 11", but can be set as large as 120" x 120".

jump to art

Scratch area

The scratch area is the area between the solid lines, and the border of the document window represents a space on which you can create, edit, and store elements of artwork before moving them onto the artboard. Objects placed on the scratch area are visible on-screen, but they do not print.

jump to art

The work area

Click on any option for information on that option.

Imageable area

Nonimageable area

Artboard

Scratch area return to text

Changing the artboard size

The boundaries of the artboard define the maximum printable area of your document. By default, the artboard is

U.S. letter size (8.5 inches by 11 inches).

You can change the artboard’s dimensions using the Document Setup dialog box.

To change the size of the artboard:

1 Choose File > Document Setup.

2 Choose any of the following options:

• Choose a preset size from the Size pop-up menu.

• Choose Custom from the Size pop-up menu, and enter the dimensions you want in the Dimensions text boxes, up to 120 inches by 120 inches. You can change the units of the artboard size by choosing a different ruler unit size from the Ruler Units pop-up menu.

• Select the Use Page Setup option to set the size of the artboard to match the page size set in the Page Setup dialog box. The size of the artboard then changes any time you choose a new page size in the Page Setup dialog box.

3 Click OK.

jump to art

See also

• About the work area

• Setting up standard and custom pages

• Document Setup dialog box

Aligning the artboard with the printed page

The artboard’s dimensions do not necessarily match the paper sizes used by printers. As a result, when you print a document, the program divides the artboard into one or more rectangles that correspond to the page size available on your printer. Dividing the artboard to fit a printer’s available page size is called

tiling.

You define the page size by selecting a page type in the Page Setup dialog box.

On most printers, the imageable area is slightly smaller than the page. The imageable area is surrounded by either dotted lines or a gray rectangle. (This area is usually centered on the artboard by default; however, if an inkjet printer is selected, the imageable area may be displayed to the left and top of the artboard.)

Note: The imageable area and page size is not a limitation when printing to imagesetters that handle large media.

Imagesetters can typically print to the edge of the page. The page size used by an imagesetter may be larger than

the page size specified in Illustrator, enabling you to print bleeds, for example, that run past the edge of the page.

As you work with tiled artwork, be sure to consider how the artwork relates to the boundaries of the page grid and to the total dimensions of the artboard. For example, if the artwork is tiled onto six pages, part of the artwork will print on a separate sheet of paper that corresponds to page 6. If you specify printing only from pages 1 to 5, the part of the artwork that is on page 6 won’t print.

The program may print blank pages if the document is tiled so that the bounding box of the artwork intersects pages that do not contain any artwork. The

bounding box is a transparent border that defines the boundaries of your artwork. In the following illustration, the bounding box surrounds the artwork, not its direction lines.

See also

• About the work area

• Setting up standard and custom pages

Choosing tiling options

You set how pages tile using the options in the Document Setup dialog box—

Single Full Page, Tile Full Pages, and Tile

Imageable Areas. These options let you print the artwork on one or more pages, printing each page according to the page size defined in the Page Setup dialog box.

To set whether the tiling format is visible on-screen:

Choose View > Show Page Tiling or

View > Hide Tiling.

To change the page tiling options:

1 Choose File > Document Setup.

2 Choose one of the following options: jump to art

• Select the Single Full Page option (the default) to view and print one page.

• Select the Tile Full Pages option to view and print multiple pages containing separate pieces of artwork. For example, you can use this option to print a twopage brochure.

To view and print multiple pages, the artboard size set in the must be large enough to fit more than one full page at a time.

Note: With the Tile Full Pages option, any artwork that extends past the imageable area of a given page is not printed.

• Select the Tile Imageable Areas option to view and print a single piece of artwork that is too large to fit on one page. For example, you could use this option to print artwork for a large poster onto several sheets of standard-size paper for proofing.

When you print a document using this option, the artwork is divided among the imageable areas of the pages.

3 Click OK.

If you have set up the document to view and print multiple pages, the document is tiled onto pages numbered from left to right and from top to bottom, starting with page 1. These page numbers appear on-screen for your reference only; they do not print. The numbers enable you to print all of the pages in the document or specify particular pages to print.

The page or set of pages is aligned with the center of the artboard by default.

However, you can reposition pages on the artboard using the page tool, as described next in moving the page boundaries .

See also

• About the work area

• Setting up standard and custom pages

• Document Setup dialog box

Tiling options

Single Page option:

Letter size page

11 ” x 14 ” artboard

Tile Full Pages option: Letter size page

20 ” x 14 ” artboard

Tile Imageable Areas option: Letter size page

40 ” x 60 ” artboard

Moving the page boundaries

You can adjust the placement of a page on the artboard to control how artwork is printed on the page. This is a good way to avoid having the artwork extend past the boundaries of the current page.

You can adjust the page on any of the three View displays. You may find it easier to choose View

Fit In Window first so that you can see more of the document while you adjust the pages.

Note: When you set up your page, you can set the page size so that all of the artwork fits on one page, as described in

Changing the artboard size .

Drag the page . . .

to the new location.

See also About the work area

To adjust a page using the page tool:

1 Select the page tool . The pointer is a dotted cross in the active window.

2 Drag the page to the new location. As you drag, two gray rectangles appear: the outer rectangle indicates the page size, and the inner rectangle indicates the page’s printable area.

Note: To move a page past the artboard boundary, change the artboard’s size in the Document Setup dialog box . Any part of a page that extends past the artboard boundary is not displayed or printed.

To adjust the artwork placement by moving it:

1 Unlock any locked objects and display any hidden objects. (See Locking and hiding objects , Locking layers , and

Hiding and showing layers .)

Choose the selection tool .

Choose Edit

Select All.

4 Drag the artwork to the new position within the page boundaries.

Setting up standard and custom pages

Using the Document Setup dialog box (to set the artboard size and page tiling) with the Page Setup dialog box (to set different page sizes and orientations) lets you create standard- and custom-size pages.

Select the Use Page Setup option in the Document Setup dialog box to override the dimensions set in the Document Setup dialog box. If you have artwork with bleeds, making the artboard larger than the page leaves room for crop marks, trim marks, and registration marks.

Vertical letter page

Document Setup:

• Use Page Setup

Page Setup:

• US letter paper

• Portrait orientation

Setting up standard and custom pages

Horizontal letter page

Document Setup:

• Use Page Setup

Page Setup:

• US letter paper

• Landscape orientation return to text

Setting up standard and custom pages, continued return to text

Vertical tabloid page

Document Setup:

• Use Page Setup

Page Setup:

• Tabloid paper

• Portrait orientation

Setting up standard and custom pages, continued

Horizontal tabloid page

Document Setup:

• Use Page Setup

Page Setup:

• Tabloid paper

• Landscape orientation return to text

Setting up standard and custom pages, continued

Two-page spread Document Setup:

• Custom artboard

(19.5" by 13.5")

• Landscape orientation

• Tile Full Pages view

Page Setup:

• US letter paper

• Portrait orientation return to text

Setting up standard and custom pages, continued

Standard envelope – center fed

Document Setup:

• Use Page Setup

Page Setup:

• Envelope paper

• Landscape orientation return to text

Setting up standard and custom pages, continued return to text

US letter page with bleed

Document Setup:

• Tabloid paper

• Portrait orientation

• Single Full Page view

Page Setup:

• US letter paper

• Portrait orientation

Setting up standard and custom pages, continued

Custom page

Document setup:

• Custom artboard

(22.75" by 25.3375")

• Portrait orientation

• Tile Imageable Areas

Page Setup:

• US letter paper

• Landscape orientation return to text

Document Setup dialog box

Click on any option for information on that option.

return to text

Drawing

About paths and anchor points

Drawing with the freehand tool

Drawing with the pen tool

Selecting objects

Adjusting path segments

Hiding the anchor points and edges of a selected object

Adding and deleting anchor points

Selecting stray points

Splitting paths with the scissors tool

Averaging anchor points

Joining endpoints

Drawing with the brush tool

Adding calligraphic strokes to objects

Drawing rectangles and ovals

Drawing, continued

Drawing polygons

Drawing spirals

Drawing stars

Tracing artwork

About paths and anchor points

A path is any line or shape that you create using the Adobe Illustrator drawing tools, and represents the outline of a graphic object. A single straight line, a rectangle, and the outline of a map are all typical examples of paths.

A path consists of one or more segments. Anchor points, which define where each segment of a path starts and ends, “anchor” the path in place. By moving anchor points, you modify path segments, and change the shape of a path.

A path can be either open or closed. A

closed path is a path that is continuous and has no beginning or end (and therefore, no endpoints); a circle is an example of a closed path. An open path has distinct endpoints; a wavy line, for example, is an open path.

The first and last anchor points on an open path are called the endpoints.

If you fill an open path, the program draws an imaginary line between the two endpoints and fills the path.

Selected line segment

Closed paths

Unselected anchor point

Selected endpoint

Open paths

Selected anchor point

Drawing with the freehand tool

The freehand tool lets you draw paths as if you were using a pencil. You can use it for fast sketching or creating a more handdrawn look than you could with the pen tool.

The freehand tool sets anchor points as you draw, according to the path length and complexity, and the Freehand Tolerance value (2 pixels, by default) set in the General Preferences dialog box . You can adjust the position of anchor points after completing the path. The freehand tolerance controls the sensitivity of the tool when you move the mouse or graphics-tablet stylus; the higher the tolerance, the less complex and smoother the path.

Freehand tolerance settings

To draw a freehand path:

1 Select the freehand tool .

2 Position the pointer where you want the path to begin, and drag. (If the Use

Precise Cursors option is select in the

General Preferences dialog box, the pointer appears as a cross hair.)

As you drag, a dotted line trails the pointer. When you release the mouse button, anchor points appear along the path and at its ends. The path takes on the current paint attributes, and is selected.

Drag to draw Result

3 To continue the existing freehand path, position the pencil tip precisely on an endpoint of the path (the pencil’s eraser will turn black) and drag.

To erase part of the path as you draw:

Hold down the Command key and drag back over the path. As you drag, the pointer changes to an eraser.

To set the freehand tolerance:

1 Choose File > Preferences > General.

2 Enter a value between 0 and 10 in the

Freehand Tolerance text box. Click OK.

To make drawing tool pointers cross hairs:

1 Choose File > Preferences > General.

2 Choose the Use Precise Cursors option, and click OK.

Drawing with the pen tool

The pen tool lets you create straight lines and smooth, flowing curves with greater precision than with the freehand tool. For most users, it is the most important and powerful drawing tool in

Illustrator, as it provides the best control and greatest accuracy for drawing.

See also

• Drawing straight lines

• About direction lines and direction points

• Drawing curves

• About ink pen effects

Drawing straight lines

The simplest line you can draw with the pen tool is a straight line, by clicking the pen tool to create anchor points.

To draw straight lines with the pen tool:

1 Select the pen tool .

2 Move the tip of the pen to the straight line’s starting point, and click. A solid square, an anchor point, appears; it is selected until you define the next point.

3 Click where you want the segment to end. Hold down the Shift key to constrain the tool to multiples of 45 degrees.

4 Keep clicking to draw more lines.

Drawing the first line Drawing more lines

The last anchor point added is a solid square, showing it is selected. The other anchor points become hollow squares.

To end an open path:

Choose one of the following options:

• Click the pen tool in the toolbox.

• Hold down the Command key to change to the selection tool , and then click anywhere away from the path.

• Choose Edit

Select None.

• Select another tool.

To close a path:

Position the pen over the first anchor point (a closed circle should appear next to the pen tip), and click.

About direction lines and direction points

On curved segments, each selected anchor point displays one or two

direction lines, ending in direction

points. The position of each direction line and point determine the size and shape of a curved segment. Moving these elements reshapes the curves in a path.

Curved segment

Direction line

Direction point

Anchor point

Parts of a curved segment

The direction lines are always tangent to (touching) the curve at the anchor points. The slope of each direction line

determines the slope of the curve, while the length of each direction line determines the height, or depth, of the curve.

Moving direction lines changes the slope of the curve.

Continuous curved paths—paths along a continuous wave shape—are connected by anchor points called smooth

points. Noncontinuous curved paths are connected by corner points.

Smooth point Corner point

When you move a direction line on a smooth point, the curves on both sides of the point adjust simultaneously. In comparison, when you move a direction line on a corner point, only the curve on the same side of the point as the direction line is adjusted.

Adjusting smooth point

Adjusting corner point

Drawing curves

You create curves by dragging the pen tool in the direction you want the curve to go. The following instructions explain how to draw curves. See also About direction lines and direction points .

To draw a curved path:

1 Select the pen tool .

2 Position the pen tip where you want the curve to begin. Hold down the mouse button. The first anchor point appears, and the pen tip changes to an arrowhead.

3 Drag in the direction you want the curve segment to be drawn. As you drag, the pointer leads one of two direction points.

The length and slope of the direction line determine the shape of the curve.

You can adjust one or both sides of the direction line later.

4 Position the pointer where you want the curve segment to end, press the mouse button, and drag in the opposite direction to complete the segment. Hold down the Shift key to constrain the tool to multiples of

45 degrees.

Drag in direction of curve to set anchor point . . .

and then drag in opposite direction to complete curve.

5 Choose one of the following options:

• To draw the next segment of a continuous curve, position the pointer where you want the next segment to end, and drag away from the curve.

Drag away from curve to create next segment.

• To change the direction of the curve and create a noncontinuous curve, position the pointer on the last anchor point, hold down the Option key, and hold down the mouse button to set a

corner point; then drag in the direction of the curve. Release the Option key

and mouse button, reposition the pointer, and drag in the opposite direction to end the curve segment.

Press Option key and drag in direction of curve . . . and then release Option key and drag in opposite direction.

Keep the following guidelines in mind to help you draw any kind of curve quickly and easily:

• Always drag the first direction point in the direction of the bump of the curve, and drag the second direction point in the opposite direction to create a single curve. Dragging both direction points in the same direction creates an

“S” curve.

Drag in opposite direction to create smooth curve.

Drag in same direction to create S” curve.

• When drawing a series of continuous curves, draw one curve at a time, setting anchor points at the beginning and end of each curve, not at the tip of the

curve. Use as few anchor points as possible, placing them as far apart as possible.

Less to more efficient curves

See the Adobe Illustrator Tutorial and

Beyond the Basics for step-by-step procedures on drawing curves with the pen tool.

Selecting objects

Before you can modify an object, you need to distinguish it from the objects around it. You do that by selecting the object with one of the selection tools.

Once you’ve selected an object, or a part of an object, you can edit it by moving or copying, deleting, or adjusting paths.

You select objects with one of three selection tools:

• The selection tool lets you select entire objects or an entire path by selecting any spot on the path.

• The direct-selection tool lets you select individual anchor points or segments on a path and displays all direction lines on a path for adjusting.

• The group-selection tool lets you select groups of objects by clicking any object in the group. Each additional click adds the next objects in the grouping hierarchy to the selection. See Grouping and ungrouping objects for more information.

Tip: To use the last selection tool used while using any other tool, hold down the Command key.

To select an entire object or line:

1 Choose the selection tool or the group-selection tool .

2 Choose one of the following options:

• If the object is filled, and you are in

Preview view, click within the object.

Note: The Area Select option in the

General Preferences dialog box must be selected for this option to work. For more information, see Selecting filled objects .

• Click the path of the object.

• Click an anchor point of the object.

• Hold down the mouse button, and drag a dotted rectangle, called a

selection marquee, around part or all of the object.

To select a segment:

Choose the direct-selection tool , and then choose one of the following options:

• Click within 2 pixels of the segment.

• Hold down the mouse button, and drag a selection marquee over part of the segment.

Drag direct-selection to select segment and marquee . . .

display direction lines.

When you select a segment, all of the anchor points on the path are displayed, including any direction lines and direction points if the selected segment is curved. Direction points appear as filled circles; selected anchor points appear as filled squares; unselected anchor points appear as hollow squares.

To add or remove selections:

Hold down the Shift key while selecting additional objects or segments.

See also

• Selecting filled objects

• Selecting multiple objects

• Deselecting objects

Selecting filled objects

The Area Select option in the General

Preferences dialog box controls whether you can select a filled object in Preview view by clicking anywhere within its area or whether you must click a path or anchor point. The Area Select option is on by default.

100

You can turn off the Area Select option, such as if you’re working with overlapping filled objects.

Area Select option off: Dragging selects points and segments within marquee.

Area Select option on: Dragging selects object.

To turn the Area Select option on or off:

1 Choose File > Preferences > General.

2 Select the Area Select option. Click OK.

101

Selecting multiple objects

You can select several objects at a time, and then move, paint, group, transform, or edit them using any editing tool.

To select or deselect multiple objects:

Choose one of the following options:

• Drag the marquee over all of the objects.

• Select an object, and then hold down the Shift key while you select additional objects.

Click to select one object . . .

and then Shift-click to select additional objects.

102

To select all objects in a document:

Choose Edit

Select All. This command selects all objects in a document except objects that have been locked or hidden. See Locking and hiding objects for more information on these types of objects.

To select all unselected objects, and deselect all selected objects:

Choose Filter > Select > Select Inverse.

103

Deselecting objects

You deselect objects when you no longer want to edit them. You can deselect one object, several objects, or all objects in your artwork.

To deselect objects when you are using a selection tool:

Choose one of the following options:

• To deselect everything in the document, click or drag at least 2 pixels away from any object, or choose Edit >

Select None.

• To deselect part of a selection, hold down the Shift key and click or drag over the path or segment you want to deselect.

104

Adjusting path segments

You can modify the shape of a path by moving one or more of its segments, or by moving its anchor points. To adjust a curved segment, you move the segment between the points anchoring it, or you move one or more of its anchor or direction points.

Tip: To quickly adjust a path you are drawing, hold down the Command key with the pen tool selected. Adjust the path, and then release the Command key to resume drawing with the pen tool.

To move a curved segment (without changing its slope):

1 Use the direct-selection tool to select the points or segments you want to move. To move a curved segment,

Shift-click to select the points anchoring the curve.

105

2 Drag the selected anchor points or segments to a new position. Hold down the Shift key to constrain the tool to multiples of 45 degrees.

Select points anchoring curve.

Drag to move curve.

To adjust a straight segment:

1 Select the direct-selection tool , and click anywhere along the segment you want to move. To adjust the angle or length of the segment, select an anchor point.

106

2 Drag the selected segment to its new position.

Click to select straight segment.

Drag to adjust.

To adjust a curve:

1 Select the direct-selection tool .

2 Select the curve you want to adjust.

Direction lines appear for that curve.

3 Choose one of the following options:

• To adjust the location of the curve’s anchor point, drag the point.

• To adjust the position of the segment between two anchor points, drag the segment.

107

• To adjust the shape of the curve on either side of the anchor point, drag the direction point.

Click to select the curve . . .

and drag the segment; drag the direction point; or drag the anchor point.

Note: Hold down the Shift key to constrain the tool to multiples of

45 degrees.

108

To convert a smooth point to a corner point, and vice versa:

1 Select the direct-selection tool .

2 Select the object and the anchor point you want to convert.

3 Hold down the Control key while any selection tool is selected, or select the convert-direction-point tool .

Tip: With the pen tool selected, press

Option+Control to use the convert- direction-point tool. With the convert- direction-point tool selected, press the

Command key to use the previous selection tool.

4 Choose one of the following options:

• Click a smooth point, converting it into a corner point without direction lines.

109

• Select a corner point, and drag to create direction lines, converting it to a smooth point.

Click smooth point for corner point.

Drag corner point for smooth point.

• Select a smooth point to display direction lines. Then drag a direction line, converting the segment into a corner point with direction lines.

110

Hiding the anchor points and edges of a selected object

Illustrator displays the anchor points of selected objects and, in Preview view, an outline of the selection edge. When you are working with complex paths or moving selected objects, you can hide all anchor points and selection edges if they obstruct your view using the Hide

Edges command. You can still adjust the selected object.

To hide or show anchor points and selection edges:

Choose View

Hide Edges or View

Show Edges.

Show Edges on Hide Edges on

111

Adding and deleting anchor points

You can add and delete anchor points on any path. Added anchor points can give you more control over the path shape.

Similarly, you can delete anchor points to change the shape of a path or to simplify the path. If a path contains numerous anchor points, it’s a good idea to delete unnecessary points to reduce the path’s complexity. (See Improving printer performance for information on path complexity when printing.)

112

To add and delete individual anchor points at specific locations on a path segment, use the add-anchor-point tool and the delete-anchor-point tool.

Adding anchor point Result

Deleting anchor point Result

To add anchor points midway between pairs of anchor points in a path, use the

Add Anchor Points filter. You can apply this filter before using distortion filters

(Punk, Bloat, Twirl, and Free Distort), to intensify their effect.

113

To add an anchor point:

1 Select the add-anchor-point tool.

2 Position the pointer on a path segment, and click the mouse button.

To delete an anchor point:

1 Select the delete-anchor-point tool.

2 Position the pointer over an anchor point, and click the mouse button.

To add anchor points using the

Add Anchor Points filter:

Select the object, and choose

Filter

Objects

Add Anchor Points.

Original

Once

Twice

114

Selecting stray points

Single, isolated anchor points make artwork unnecessarily complex and can even slow printing. Stray points can be created, for example, if you inadvertently click the pen tool in the artwork area, and then choose another tool.

The Delete Stray Points option in the

Cleanup Artwork dialog box finds and deletes all isolated single points in the artwork.

To delete all stray points:

1 Choose Filter

Objects

Cleanup.

2 Select the Delete Stray Points option.

(You can also delete any unpainted objects or any empty text paths by selecting the appropriate option.)

3 Click OK.

115

Splitting paths with the scissors tool

You may want to split paths that you have already created or that were created using the autotrace tool . Using the scissors tool, you can split an open path into two paths and split a closed path so that it becomes one or more open paths.

However, you cannot split a text path.

Path split with scissors tool and adjusted with direct-selection tool

To split a path and adjust it:

1 Select the path if you want to see its current anchor points.

2 Select the scissors tool .

116

3 Click the path where you want to split it.

If you split the path in the middle of a segment, two new endpoints are created, one on top of the other. Both endpoints are selected.

If you split the path at an anchor point, a new anchor point is created on top of the original anchor point. Both anchor points are selected.

4 Deselect the paths.

5 Use the direct-selection tool to delete or adjust the new anchor point or path segment.

117

Averaging anchor points

The Average command lets you move two or more anchor points to a position that is the average of their current locations.

Vertical Horizontal Both

Average command

To average anchor points:

1 Use the direct-selection tool to select two or more anchor points.

2 Choose Object > Average.

3 Choose whether to average along both axes, the horizontal (x) axis only, or the vertical (y) axis only.

4 Click OK. The anchor points are now coincident.

118

Joining endpoints

The Join command connects the endpoints of open paths, closing them. Joining two coincident (overlapping) endpoints replaces them with one anchor point. Joining two noncoincident endpoints draws a path between them.

Tip: To average and join two paths at once, select the two points to join, and press Command+ Option+J to join the paths at their midpoint.

To join two noncoincident endpoints:

1 Using the direct-selection tool ,

Shift-click to select the endpoints.

2 Choose Object

Join.

Click to select discrete endpoints.

Join command applied

119

To join two coincident endpoints:

1 Using the direct-selection tool , drag to select the endpoints.

2 Choose Object > Join.

3 Select the Corner or Smooth option; see About direction lines and direction points for more information. Click OK.

Drag to select coin– Join command cident endpoints.

applied

120

Drawing with the brush tool

The brush tool draws closed paths that vary in width, simulating a brush stroke.

To draw with the brush tool:

1 Select the brush tool . The pointer changes to a brush when you move it to the active window.

2 Position the tip of the brush where you want the path to begin. Drag the brush to draw the path.

When you release the mouse button, anchor points appear along the line’s perimeter.

Dragging brush Result

See also Specifying brush widths and styles .

121

Specifying brush widths and styles

The Brush Preferences dialog box lets you change the brush stroke width, style (such as variable-width lines or calligraphic lines), and brush stroke ending

(round or flat).

To specify the brush width and style:

1 Double-click the brush tool .

2 Choose from the following options:

• If you have a pressure-sensitive drawing tablet, select the Variable option; enter the minimum and maximum line-width. The pen tip pressure varies the line width: the greater the pressure, the thicker the line.

Varying brush pressure

122

• Select a Cap style and Join style for the stroke end, round or flat.

Round cap and join Flat cap and join

• Select the Calligraphic option for script letters and lines to simulate drawing with an angled calligraphic pen tip. The line width varies on the up- and downstroke. (Set the pen rotation angle in the

Calligraphic Angle box.) See also Adding calligraphic strokes to objects .

180˚ 45˚ 20˚

Different angles on a 6-point calligraphic line

123

Adding calligraphic strokes to objects

The Calligraphy filter applies a calligraphic stroke to an existing curved path. (For calligraphic brush strokes, use the Calligraphic option; see Specifying brush widths and styles .) The Calligraphy filter does not work with type.

To apply a calligraphic stroke:

Select a curved path.

Choose Filter

Stylize

Calligraphy.

3 Enter values in the Pen Width and Pen

Angle text boxes, and click OK.

Original Calligraphic strokes applied

124

Drawing rectangles and ovals

Adobe Illustrator includes four rectangle tools and two oval tools:

• The rectangle and oval tools let you draw rectangles and ovals by dragging from a corner of the rectangle or an edge of the oval to its opposite corner or edge.

• The centered-rectangle and centeredoval tools draw rectangles and ovals when you drag outward from the center.

• The rounded-rectangle tool lets you draw round-cornered rectangles by dragging from one corner of the rectangle to the opposite corner.

• The centered-rounded rectangle tool draws round-cornered rectangles when you drag outward from the rectangle’s center.

Tip: To toggle between the rectangle and centered-rectangle tools, the oval and centered-oval tools, and the rounded-rectangle and centeredrounded-rectangle tools, double-click a tool, or press the Option key when any of these tools are selected.

125

When you create an object with the rectangle or oval tools, a center point appears in the object’s center. You can use this point to drag the object or to align it with other elements in your artwork. You can show or hide the center point, but you cannot delete it.

Squares with center point visible and hidden

To create a rectangle or oval by dragging from an edge:

1 Select the rectangle tool , the rounded-rectangle tool , or the oval tool .

2 Position the pointer at a corner or an edge of the shape you will create, and drag to the opposite corner or edge. Hold down the Shift key to

126

constrain the tool to multiples of 45 degrees, and create squares with the rectangle tool and circles with the oval tool.

Drawing from corner and center

To create a rectangle or oval by dragging from the center:

1 Select one of the centered-rectangle tools or the centered-oval tool by double-clicking the tool icon or pressing

Option with the rectangle tool or oval tool selected.

2 Position the pointer at the center of the shape you want to create, and drag diagonally to any corner or edge. Hold down the Shift key to constrain the tool to multiples of 45 degrees.

127

To draw a rectangle or oval by specifying dimensions:

1 Select any rectangle or oval tool.

2 Click where you want to begin creating the shape. The beginning point is the center for a centered object, or a corner of a rectangle or side of an oval.

The Rectangle dialog box displays the dimensions of the last drawn rectangle or oval. The units of measure are determined by defining ruler units in the

Document Setup or General Preferences dialog box.

3 Enter the rectangle’s width in the

Width text box.

Note: To create a square or circle, enter a value in the Width text box, and then

click the word Height; this copies the width value to the Height text box.

4 In the Height text box, enter the height you want the shape to be.

If you are drawing a rounded rectangle, enter its corner radius value, which represents the radius of a hypothetical circle drawn in the corner of the

128

rectangle or square. The default corner radius is 12 points. A corner radius of zero creates square corners.

Note: The corner style of the rectangle or square you draw is determined by the corner radius value you specify in either the Rectangle or General Preferences dialog box. Specifying a corner radius value in either dialog box updates the value in the other dialog box.

5 Click OK to draw the rectangle or oval.

To display or hide the center points:

1 Choose Object > Attributes.

2 Select the Show Center Point option, and click OK.

129

Drawing polygons

The polygon plug-in tool draws an object with a specified number of sides of equal length, with each side the same distance from the center of the object.

Polygons

To draw a polygon by dragging:

1 Select the polygon tool in the plug-ins toolbox . (Choose Window >

Show Plug-in Tools to display the plug-ins tool box.)

2 Position the pointer at the center of the polygon you will create, and drag.

130

3 Choose any of the following options:

• Drag the pointer in an arc to rotate the polygon.

• Hold down the Shift key to constrain the tool to multiples of 45 degrees.

• Hold down the spacebar to move the polygon as you drag.

• Press or hold down the Up arrow key or the Down arrow key to add or delete polygon sides.

To draw a polygon by specifying dimensions:

1 Select the polygon tool from the plug-ins toolbox .

2 Click to set the polygon’s center. The

Polygon dialog box displays the dimensions of the last drawn polygon. The units of measure are set by defining ruler units in the Document Setup or

General Preferences dialog box.

3 In the Radius text box, enter the distance from the center point to each line’s endpoint.

4 Click the arrows or enter the number of sides in the Sides text box. Click OK.

131

Drawing spirals

The spiral plug-in tool creates a spiralshaped object of a given radius and number of winds; that is, the number of complete turns that the spiral will complete from start to finish.

Spirals

To draw a spiral by dragging:

1 Select the spiral tool from the plug-ins toolbox . (Choose Window >

Show Plug-in Tools to display the plug-ins tool box.)

2 Position the pointer at the center of the spiral you want to create, and then drag.

132

3 Choose any of the following options:

• Drag the pointer in an arc to rotate the spiral.

• Hold down the Shift key to constrain the tool to multiples of 45 degrees.

• Hold down the Control key to increase or decrease the amount by which each wind of the spiral decreases relative to the previous wind.

• Hold down the spacebar to move the spiral as you drag.

• Press or hold down the Up arrow key or the Down arrow key to add or delete winds to the spiral.

To draw a spiral by specifying dimensions:

1 Select the spiral tool from the plug-ins toolbox .

2 Click where you want to place the center of the spiral.

133

By default, the Spiral dialog box displays the dimensions of the last spiral you drew. The units of measure are determined by defining ruler units in the

Document Setup or General Preferences dialog box.

3 Enter the distance from the center to the outermost point in the spiral in the

Radius text box.

4 Enter the amount by which each wind of the spiral should decrease relative to the previous wind in the Decay text box.

5 Click the arrows or enter the number of segments in the Segments text box.

Each full wind of the spiral consists of

4 segments.

6 Select the clockwise or counterclockwise option to specify the direction of the spiral.

7 Click OK.

134

Drawing stars

The star plug-in tool creates a starshaped object with a given number of points and size.

Stars

To draw a star by dragging:

1 Select the star tool from the plug-ins toolbox . (Choose Window > Show

Plug-in Tools to display the plug-ins tool box.)

2 Position the pointer at the center of the star you will create; then drag.

3 Choose any of the following options:

• Drag in an arc to rotate the star.

• Hold down the Shift key to constrain the tool to multiples of 45 degrees.

135

• Hold down the Option key to make the slopes on every other side run parallel to each other.

• Hold down the Control key to hold the inner radius constant.

• Hold down the spacebar to move the star as you drag.

• Press or hold down the Up arrow key or the Down arrow key to add or delete sides to the star.

To draw a star by specifying dimensions:

1 Select the star tool from the plug-ins toolbox .

2 Click to position the star’s center. The

Star dialog box displays the dimensions of the last drawn star. The units of measure are set by defining ruler units in the

Document Setup or General Preferences dialog box.

3 In the Radius 1 text box, enter the distance from the star’s center to its innermost points.

136

4 In the Radius 2 text box, enter the distance from the star’s center to its outermost points.

5 Click the arrows or enter the number of sides to the star in the Points text box.

Click OK.

137

Tracing artwork

In some cases, you may want to base a new drawing on an existing piece of artwork. For example, you may want to create a graphic based on a pencil sketch drawn on paper, or an image saved in another graphics program. In either case, you can bring the image into Illustrator and trace over it.

You have two ways of tracing artwork, depending on the source of the artwork you want to trace and how you want to trace it:

• You can open an image in PICT or

MacPaint

format as a template. See

Using templates .

• You can place an EPS image into an

Illustrator document, put it on a layer, and dim the layer. See Tracing over an

EPS or TIFF image .

See also Drawing with the autotrace tool .

jump to art

138

Using templates

A template is a dimmed 1-bit PICT or

MacPaint image that can be displayed in a document’s background for tracing over. You can open an existing or new document with a template, and change templates. You can display or hide a template, but you cannot change or move it once it is in a document.

Using the autotrace tool , you can automatically trace objects in the template.

To open a new document with a template:

1 Hold down the Option key while choosing File > New.

2 Select a PICT or MacPaint image.

This can be a scanned image, an image created by Illustrator or another application, or an image included in a collection of clip art in either of these formats. (See

Importing and Exporting Artwork for information on scanning and placing images.)

3 Click Open. The document appears with the template centered in the background.

139

To open an existing document and template:

Choose File > Open, select the name of the document to open; click Open. When you open an existing document, the corresponding template document appears.

To change the template associated with an existing document:

1 Close the document if it is open.

2 Hold down the Option key while choosing File > Open.

3 Select the document you want to open, and click Open.

4 Select a new template, and click OK.

To hide or show a template:

Choose View > Hide Template or View >

Show Template.

jump to art

140

Drawing with the autotrace tool

The autotrace tool traces simple shapes and lines. For best results when tracing artwork, trace simpler shapes with the autotrace tool and draw more complex shapes with the freehand or pen tool.

You can also use a dedicated tracing program such as Adobe Streamline™.

To trace a template shape:

1 Open a document with a template.

2 Select the autotrace tool .

3 Position the cross hair on a bitmap shape, within 6 pixels of its edge. The boundary between differently shaded areas guides the autotrace tool.

141

4 Click to trace the path.

Click object . . .

to autotrace entire object.

Illustrator draws the path from where you clicked, keeping the shape on its right. The path may be drawn clockwise or counterclockwise, depending on where you click and on the path’s shape.

Click object . . .

to autotrace entire object.

142

To trace part of a template shape:

1 Open a document with a template.

2 Select the autotrace tool .

3 Drag the pointer from the point on the bitmap shape where the path will start to its end.

Drag autotrace tool . . .

to autotrace part of object.

When tracing part of a template, you must start and stop dragging within 2 pixels of shape’s edge. See also Setting the autotrace gap distance .

To connect a new autotrace path with an existing path, start dragging from the anchor point that will connect the paths. jump to art

143

Setting the autotrace gap distance

The lines and shapes in bitmap template images often contain gaps that become visible when you enlarge your view of the document. You can control the accuracy with which the autotrace tool traces these gaps using the Auto Trace

Gap option in the General Preferences dialog box.

The gap distance setting tells the autotrace tool to ignore gaps that are equal to or less than the number of pixels you specify. For example, setting the distance to 1 tells the autotrace tool to ignore gaps of 1 pixel or less.

To set the autotrace gap distance:

1 Choose File

Preferences

General.

2 Enter 0 (the default), 1, or 2 in the

Auto Trace Gap text box. The value is calculated in number of pixels. Click OK.

The Freehand Tolerance setting in the

General Preferences dialog box also affects the autotrace tool. See drawing with the freehand tool for more information.

144

Tracing over an EPS or TIFF image

On occasion, you may want to trace over an EPS or TIFF image. You can trace over such an image by using layers — putting the artwork onto a layer in an

Illustrator document and then, optionally, dimming the layer. This action dims any placed EPS image on the layer, without dimming any other artwork on that layer.

Because a placed EPS image displays

8-bit color, even while dimmed, tracing over a placed EPS image may be especially useful for complex, multicolored, or detailed artwork. Also, you can move a placed EPS or TIFF image anywhere within the work space, something you cannot do with templates. However, because the autotrace tool traces only templates, you cannot use it to automatically trace placed EPS or TIFF images.

To trace over an EPS or TIFF image:

1 Create a new layer. (See Creating layers and setting layer options for more information.)

145

2 Choose any of the following options:

• Choose File

Place to place the EPS or TIFF image on the layer. See Placing

EPS files for more information.

• Copy the EPS image and paste it onto the layer. (For information on placing images, see Opening and placing artwork .)

• Dim the layer by double-clicking the layer’s name in the Layers palette, selecting the Dim Placed Images option, and clicking OK. This dims any EPS image on the layer.

3 Trace over the image using the pen tool or freehand tool .

jump to art

146

Tracing PICT, MacPaint, and EPS images

PICT and MacPaint images containing simple filled shapes can be opened as a template and quickly traced over with the autotrace tool.

PICT and MacPaint images containing line art can be opened as a template and traced over with the drawing tools. The autotrace tool is not recommended for line art, because it translates lines into closed paths.

Tracing PICT, MacPaint, and EPS images

EPS images containing complex, detailed, or multi-color artwork can be placed on a layer, transformed, and dimmed; they can then be traced over with the drawing tools.

El árbol del verano intenso, invulnerable, es todo cielo azul, sol amarillo, cansancio a goterones, es una espada sobre los caminos, un zapato quemado en las ciudades: la claridad, el mundo nos agobian, nos pegan en los ojos con polvareda, con súbitos golpes de oro, nos acosan los pies con espinitas, con piedras calurosas, y la boca sufre más que todo los dedos: tienen sed la garganta, la dentadura, los labios y la lengua: queremos beber las cataratas, la noche azul, el polo, y entonces cruza el cielo el más fresco de todos los planetas, la redonda, suprema y celestial sandía

Es la fruta del árbol de la sed.

Es la ballena verde del verano.

El universo seco de pronto tachonado por este firmamento de frescura deja caer la fruta rebosante: se abren sus hemisferios mostrando una bandera verde, blanca, escarlata, que se disuelve en cascada, en azúcar, en delicia!

Cofre del agua, plácida reina de la frutería, bodega de la profundidad, luna terrestre!

Oh pura, en tu abundancia se deshacen rubíes y uno quisiera morderte hundiendo en ti

cara, el pelo, el alma!

Te divisamos laen la sed como mina o montaña de espléndido alimento, pero te conviertes entre la dentadura y el deseo en sólo fresca luz que deslíe en manantial que nos tocó cantando.

Y así no pesas en la siesta abrasadora, no pesas, sólo pasas y tu gran corazón de brasa fría se convirtió en el agua de una gota.

EPS images containing artwork elements can be placed on a layer, moved, and dimmed, for use as a reference guide when composing artwork.

return to text

Moving and Aligning

Objects

Moving and copying objects

Cutting and pasting

Deleting objects

Rotating the x and y axes

Stacking objects

Moving objects to the front and back of the artwork

Pasting objects in front of and in back of other objects

Pasting objects in their current layer

Using the Control palette

Using the measure tool

Using guides

Grouping and ungrouping objects

Locking and hiding objects

149

Moving and copying objects

You can move or copy objects in your artwork by

• Cutting and pasting

• Dragging to move or copy

• Dragging between applications including open Illustrator and Photoshop documents

• Using the arrow keys

• Using the Move command

• Using the Transform Each command when Moving groups of objects

• Using the Control palette .

In addition, you can use guides to align objects with precision.

You can also use the Option key or the

Move dialog box to move copies of objects rather than the objects themselves. In this case, if the object you are copying is part of a group, the copy becomes part of the same group.

150

If the copy is made when you are moving groups of objects or objects on a number of layers, the copied objects are all included in the topmost group or layer. To make a copy outside of the object’s group, use the Copy and Paste commands in the Edit menu.

See also

• Choosing preferences that affect how objects move

• Aligning and distributing objects vertically and horizontally

• Moving groups of objects

• Offsetting objects

• Moving objects to the front and back of the artwork

• Pasting objects in front of and in back of other objects

• Pasting objects in their current layer

151

Choosing preferences that affect how objects move

The General Preferences dialog box lets you specify how an object is moved.

To set preferences that affect how objects move:

1 Choose File

Preferences

General.

2 Choose one or more of the following options:

• Select the Snap to Point option to specify whether, when you drag an object, it “snaps” to an anchor point or a guide when the pointer is within

2 pixels of the anchor point or guide.

This option is on by default. You can turn this option off if you want to drag objects without restricting their movement in this way.

• Enter an angle between 0 and 360 degrees in the Constrain Angle text box to rotate the x and y axes. The rotation of the axes determines how drawing and movement are constrained when you hold down the Shift key. See Rotating the x and y axes for more information.

152

• In the Cursor Key text box, enter the distance you want each press of an arrow key to move a selection.

• Select the Transform Pattern Tiles option to transform a pattern when you move or transform an object painted with a pattern. For more information on patterns, see Creating and working with patterns .

3 Click OK.

153

Cutting and pasting

Cutting and pasting lets you move or copy objects in your artwork.

To move or copy an object by pasting:

Select the object you want to cut.

Choose Edit

Cut or Edit

Copy.

3 If you want to paste into another document, open the document.

Note: To paste a bitmap PICT version of the selected object onto the Clipboard for pasting into other applications, hold down the Option key while choosing the

Copy command.

4 Choose one of the following options:

• Choose Edit

Paste to paste the objects into the center of the active window.

• Choose Edit

Paste in Front to paste the object directly in front of the selected object.

154

• Choose Edit > Paste in Back to paste the object directly in back of the selected object.

See also Pasting objects in front of and in back of other objects .

155

Dragging to move or copy

Dragging lets you move or copy objects in your artwork.

To move an object or a copy of an object by dragging:

1 Select the object. Then position the pointer on an anchor point or path segment of the selected object.

2 Drag the object to its new location.

Hold down the Shift key to constrain the object to multiples of 45 degrees.

To drag a copy of the object, hold down the Option key as you drag.

Press the Option key to copy the selection.

as you drag . . .

156

Dragging between applications

You can use the drag and drop capability to move or copy objects between applications.

To move a copy of an object between

Illustrator documents or between

Illustrator and Photoshop documents by dragging:

1 Open the document to which you want to drag the object.

2 Select the object. Then position the pointer on an anchor point or path segment of the selected object.

3 Drag the object to its new location.

See also Using the drag and drop feature to import and export artwork .

157

Using the arrow keys

You can precisely move or copy objects in your artwork using the arrow keys.

To move an object using the arrow keys:

1 Select the object.

2 Press the arrow key that indicates the direction in which you want the object to move.

The distance the object moves each time you press an arrow key is determined by the value specified in the

Cursor Key text box of the General

Preferences dialog box; the default distance is 1 point (.0139 inch).

158

Using the Move command

You can move or copy objects a specified amount using the Move command.

To move or copy an object a specific distance and direction:

1 Select the object.

2 Choose Arrange

Move, or hold down the Option key and click the selection tool .

The Move dialog box displays the results of the last move or measure operation using the unit of measure set in the General Preferences dialog box. See defining ruler units for more information.

3 Choose one of two options:

• Enter the horizontal and vertical distances that you want the object to move. Positive values move the object up and to the right of the x axis; negative values move an object down and to the left.

159

• Enter the distance and angle for the move. The angle you enter is calculated in degrees from the x axis. Positive angles specify a counterclockwise move; negative angles specify a clockwise move. You can also enter values between 180 and 360 degrees; these values are converted to their corresponding negative values (for example, a value of 270 degrees is converted to

–90 degrees).

90˚

135˚

180˚

-135˚

-90˚

Directions relative to the x

axis

45˚

0˚

-45˚

160

Aligning and distributing objects vertically and horizontally

The Align palette enables you to align selected objects along the axis you specify. You can align objects along the vertical axis, using the rightmost, center, or leftmost anchor point of the selected objects. You can also align objects along the horizontal axis using the topmost, center, and bottommost anchor points of the selected objects.

Note: Paragraph alignment of point type over-rides the Align Objects commands. For more information, see Specifying alignment options .

161

In addition, you can distribute objects evenly along the horizontal axis or vertical axis.

Alignment option:

Horizontal center

Alignment option:

Vertical center

To align or distribute objects:

1 Select the objects you want to align or distribute.

2 Choose Window > Show Align.

3 Click the icon representing the type of alignment or distribution you want.

162

Moving groups of objects

The Move option in the Transform Each dialog box moves objects in a selection in a specified or random direction. You can use the Random option to give a slightly less rigid, more natural look to a group of items. For example, if you draw a brick wall, and want the bricks to appear slightly offset from each other instead of perfectly aligned, you could select the Random option.

To use the Move Each option:

1 Select the objects you want to move.

2 Choose Arrange > Transform Each.

3 In the Move Horizontal and Vertical text boxes, enter the distance you want to move the selected objects, or use the associated sliders. These numbers must be between –4000 and 4000 points, and must not cause the objects to move beyond the edge of the artboard.

163

4 Choose one of two options:

• To move the objects by the specified amounts, click OK.

• To move the objects randomly, but no more than the specified amounts, select the Random option. Then click OK.

164

Offsetting objects

You can create a replica of a path, set off from the selected path by a specified distance, using the Offset Path filter.

This is useful when you want to create concentric shapes or make many replications of a path at a regular distance from the original path. You can create an offset path from a closed path or an open path; if created from a closed path, the new offset path appears the specified distance outside or inside the original path.

Original Offset paths: –2 pts.

165

To create an offset path:

Select the paths you want to offset.

Select Filter > Objects > Offset Path.

3 Specify the Offset distance, Line join type, and Miter limit. For more information about these options, see Setting stroke attributes with the Paint Style palette .

4 Click OK.

166

Deleting objects

Deleting an object removes it permanently.

To delete an object:

1 Select the object.

2 Press the Delete key or choose

Edit > Clear.

167

Rotating the

and

axes

When you open a new document, the x and y axes are parallel to the horizontal and vertical sides of the window. You can rotate the axes by specifying an angle of constraint in the General Preferences dialog box.

Rotating the axes is useful if your artwork contains elements that are rotated to the same angle, such as a logo and text displayed on a 20-degree angle.

Instead of rotating each element you add to the logo, you can simply rotate the axes by 20 degrees. Everything you draw will be created along the new axes.

y x

Normal

168

y y y x

° x

Constrain angle: 20

; object rotated 20

You can then use the Shift key to constrain the movement of one or more objects so that they move in a precise horizontal, vertical, or diagonal direction (in 45-degree increments) relative to the current orientation of the x and y axes.

Pressing the Shift key while dragging or drawing limits movement to 45

increments.

169

The following objects and actions are aligned along the new axes:

• Text objects, gradient angles you draw with the gradient tool, and objects you draw with the rectangle, oval, or graph tool

• Scaling, reflecting, and shearing

• Moving objects with the arrow keys

• Any objects or operations to which you apply constraint (by holding down the Shift key while performing the action) limiting them to 45-degree multiples relative to the axes

• The angle reported in the Info palette

The following objects and actions are

not affected by the new axis:

• Objects that already exist

• Rotating and blending

• Drawing with the pencil or autotrace tool

170

To rotate the axes:

1 Choose File

Preferences

General.

2 Enter the angle at which you want the axes rotated in the Constrain Angle text box. If you enter a positive number, the axes are rotated counterclockwise. If you enter a negative number, the axes are rotated clockwise.

3 Click OK.

The rotation of the axes is saved in

Adobe Illustrator’s Preferences file; it therefore affects new artwork in all documents until you change its value.

171

Stacking objects

The Adobe Illustrator program stacks successively drawn objects, beginning with the first object drawn. How objects are stacked determines how they are displayed when they overlap. In addition, stacking is important when working with masks .

You can change the stacking order, also called the painting order, of objects in your artwork at any time. You can also control how overlapping objects are displayed by using layers .

Note: Grouping objects may affect the way the objects are stacked in relation to other, nongrouped objects in the artwork. See Grouping and ungrouping objects for more information.

172

Moving objects to the front and back of the artwork

The Bring to Front and Send to Back commands let you move an object to the front or back of the stack of objects on its layer. (For more information, see about layers .)

If the object is part of any type of group—including masked artwork, compound paths, text, and word wraps—the object is moved to the front or back of the group, rather than the front or back of the entire layer.

Selected object Object in middle of stack

173

Object brought to front

Object repositioned in stack

To make an object the frontmost or backmost object on its group or layer:

1 Select the object you want to move.

2 Choose Arrange

Bring to Front or

Arrange

Send to Back.

174

Pasting objects in front of and in back of other objects

The Paste in Front and Paste in Back commands let you paste copies of objects directly on top of and behind the objects you select. This is useful if you want to then move the copy a specified distance from the original’s location.

These commands also enable you to paste the artwork into the same position in a new document as it was in the old, relative to the page origin.

To move an object in front of or in back of other objects in the stacking order:

1 Select the object you want to move.

2 Choose Edit

Cut. The selected object is temporarily deleted and is placed onto the Clipboard.

3 Select the object or objects in front of or in back of which you want the cut object to appear.

4 Choose Edit > Paste In Front or Edit >

Paste In Back.

175

The cut object is pasted into position.

If no object was selected in step 3, the object is pasted on top of or in back of the stack.

Red object selected Red object cut

Yellow object selected

Red object pasted in back

176

If you paste more than one object, all pasted objects appear in front of or in back of the selected artwork. However, the relative painting order among the individual pasted objects remains the same. If you are working with multiple layers in your document that you have defined with the Layers palette, the layers may affect how objects are pasted.

See Moving objects between layers for more information.

177

Pasting objects in their current layer

Pasted objects (even if copied from different layers) are placed directly in front of or in back of all selected objects on the current layer if the Paste Remembers

Layers option is turned off in the General Preferences dialog box. However, the relative painting order among the individual pasted objects remains the same.

The Paste Remembers Layers option makes objects you paste retain their layering order. (See Moving objects between layers for more information.)

To paste objects into their current layer:

1 Choose File > Preferences > General.

2 Select the Paste Remembers Layers option, and click OK.

178

Using the Control palette

The Control palette displays information about selected objects. In addition, you can use the palette to move, scale, rotate, and resize objects.

To use the Control palette:

1 Choose Window

Show Control

Palette.

2 Select the object.

3 Choose any of the following options:

• To select the reference point from which you are modifying the object, click a handle on the square representing the object’s bounding box on the palette.

• To move an object horizontally, enter a value in the X text box.

• To move an object vertically, enter a value in the Y text box.

• To change the width of an object, enter a value in the W text box.

• To change the height of an object, enter a value in the H text box.

179

• To rotate an object, enter a new angle between 0 and 360 degrees in the Angle text box.

• To scale an object, enter a value in the

Scale text box.

4 Press the Tab key or Return key to apply the change.

jump to art

180

The Control palette

Click on any option for information on that option.

Point of origin for transformation

Horizontal position

Width Scale

Vertical position Height Angle return to text

Using the measure tool

The measure tool calculates the distance between any two points in the work area. When you measure from one point to another, the distance measured is displayed in the Info palette. The Info palette shows the horizontal and vertical distance traveled from the x and y axes, the absolute horizontal and vertical distance, the total distance, and the angle measured.

All measurements except the angle are calculated by defining ruler units in the

General Preferences dialog box or in the

Document Setup dialog box.

jump to art

182

To measure the distance between two points:

1 Select the measure tool .

2 Choose one of two options:

• Click the two points between which you want to measure.

• Click the first point and drag to the second point. Hold down the Shift key to constrain the tool to multiples of

45 degrees.

If it was not previously displayed, the

Info palette appears.

183

The Info palette

Horizontal position

Absolute horizontal distance measured

Angle measured

Vertical distance from y axis

Absolute vertical distance measured

Angle diagonal distance measured return to text

Using guides

To help align text and graphic objects on the page, you can create and display dotted outlines, called guides, in the background of the work area.

You can create two kinds of guides:

• Ruler guides are straight horizontal or vertical lines created with the ruler.

These guides are the simplest to make and are useful for setting alignment lines across the length or width of the work area.

• Guide objects are objects (such as lines, rectangles, or any other artwork consisting of paths, except type) that have been converted to guides. Using guide objects can help you plan and create your artwork around one or more objects. You can convert guide objects back into graphic objects at any point.

New guides are locked in place to orient your artwork. However, you can unlock a guide to select, move, delete, modify, or revert it to a graphic object.

185

By default, objects are aligned with guides whenever they are dragged within 2 pixels of the guide. For information on how to turn this feature on and off, see Choosing preferences that affect how objects move .

Tip: To make working with multiple guides easier, place all guides on a single layer. You can then choose the layer to select all guides for moving

or adjusting. See Creating layers and setting layer options for more information.

To create a ruler guide:

1 If the rulers are not already displayed, choose View

Show Rulers.

2 Position the pointer on the right ruler for a vertical guide, or on the bottom ruler for a horizontal guide. Hold down the Option key to switch the ruler guide from horizontal to vertical and vice versa.

186

3 Hold down the mouse button and drag the dotted ruler guide into position.

To convert an object into a guide object:

1 Select an object, a group of objects, or any combination of objects and groups.

187

2 Choose Object > Guides > Make.

Objects selected and converted to guides with aligned artwork.

To move, delete, or release a guide:

1 Choose Object

Guides

Lock to unlock the guide. When a guide is locked, a check mark appears in front of the Lock Guide command.

2 Select the guide you want to move, delete, or release, and choose one of three options:

• Move the guide by dragging or copying.

• Delete the guide by pressing the

Delete key or choosing Edit

Cut.

188

• Release the guide object, turning it back into a regular graphic object, by choosing Object > Guides > Release.

Note: The Lock Guides option locks all guides in the document. To lock an individual guide, select the guide when the

Lock Guides option is turned off, and choose Arrange

Lock.

To delete all guides in the artwork:

Choose Object

Guides

Delete All.

189

Grouping and ungrouping objects

You can combine several objects into a group so that the objects are treated as a single unit. You can then move or transform a number of objects without affecting their individual positions or attributes. For example, you might group the objects in a logo design, so that you can move and scale the logo as one unit.

Groups can also be nested—that is, they can be grouped within other objects or groups to form larger groups.

To group or ungroup objects:

1 Select the objects to be grouped or ungrouped. Selecting part of an object and grouping it will group the entire object.

2 Choose Arrange

Group or Arrange

Ungroup.

See also

• Selecting grouped objects

• Grouping stacked objects

190

Selecting grouped objects

Once objects have been grouped, selecting any part of the group with the selection tool selects the entire group. If you are unsure whether an object is part of a group, select it with this tool.

The direct-selection tool lets you select a single path or object that is part of one or several groups. If you have groups of objects within other groups, you can select the next group in the grouping hierarchy using the group-selection tool . Each successive click adds another subset of grouped objects to the selection.

A B C

Three groups: group A is part of group B, which in turn is part of group C.

191

To select grouped objects with the group-selection tool:

1 Select the group-selection tool .

2 Position the pointer on the path you want to select, and click the mouse button.

3 Click the same place again to select successive groups until you have selected everything you want to include in your selection.

First click selects an object.

Second click selects group A.

192

Third click selects next group

(group B).

Fourth click selects next group

(group C).

193

Grouping stacked objects

Grouped objects must be stacked in succession on the same layer of the artwork; therefore, grouping may change both the layering of objects and their stacking order on a given layer. See

Stacking objects and About layers for more information.

Grouped objects are stacked together behind the frontmost object in the group. If you group two objects that are separated by a nongrouped object in the stacking order, the nongrouped object will be moved behind the grouped objects.

Three objects: front and back objects selected

Front and back objects grouped

194

Locking and hiding objects

You can use the Lock and Hide commands to isolate parts of your artwork on which you do not want to work. Once an object has been locked or hidden, it cannot be selected or modified in any way. These features are useful when you are working on objects that overlap. In addition, the Hide command makes objects temporarily invisible, and so may speed performance when you work on large or complex artwork.

Locked objects remain locked when files are closed and reopened. However, hidden objects reappear when files are reopened.

You can lock or hide entire objects only.

Hiding the anchor points and edges of a selected object and locking or hiding them affects the entire object. However, you can lock or hide individual objects within groups as well as lock or hide entire groups.

195

To lock or hide artwork:

Choose one of the following options:

• To lock objects, first select the objects, and then choose Arrange > Lock.

• To lock all unselected objects, hold down the Option key and choose

Arrange > Lock.

• To hide a selected object, select the objects, and choose Arrange

Hide.

• To hide all unselected objects, hold down the Option key and choose

Arrange

Hide.

To unlock or show all objects:

Choose Arrange

Unlock All or Arrange

Show All. All previously locked objects are unlocked and selected. Any previously selected objects are deselected.

To unlock or show all objects within a selected group:

1 Select an unlocked and visible element within a group.

2 Hold down the Option key and choose Arrange

Unlock All or

Arrange

Show All.

196

Modifying Shapes and

Applying Special Effects

Using the transformation tools

Applying special effects to graphic objects

Changing gradients and patterns into objects

Changing vector graphics into bitmap images

Applying special effects to bitmap objects

Using the Pathfinder filters to modify shapes

Converting strokes to filled objects

Cutting objects with objects

Working with compound paths

Working with masks

197

Using the transformation tools

The transformation tools consist of the rotate tool, the reflect tool, the scale tool, the shear tool, and the blend tool.

Except for the blend tool, the transformation tools change objects relative to a fixed point on or around the object.

See

• Rotating

• Rotating each object in a selection

• Reflecting

• Scaling

• Scaling each object in a selection

• Shearing

• Distorting

• Blending shapes

• Defining the point of origin

• Repeating transformations

198

Defining the point of origin

All of the transformation tools except the blend tool perform their functions in relation to some fixed point on or around the object. This fixed point is called the point of origin . The default point of origin is the object’s center point.

You can drag an object to transform it around its center point, or you can set a new point of origin by clicking and then dragging to transform the object.

Original Scaled from center

199

Original Scaled from new point of origin

When you transform an object, the changes take place horizontally (along the x axis), vertically (along the y axis), or along both axes, relative to the

Constrain Angle setting in the General

Preferences dialog box.

200

Repeating transformations

Sometimes you may want to repeat the same transformation several times, especially when you are copying objects. The Repeat Transform command in the Arrange menu lets you repeat a move, scale, rotate, reflect, or shear operation as many times as you want. You must choose the command immediately after you perform the operation. This command does not work with the blend tool.

201

Rotating

Rotating an object turns it around a fixed point that you designate. The default point of origin is the object’s center point. Copying while rotating is a useful way to create radially symmetrical objects, such as the petals of a flower.

See also Rotating each object in a selection .

To rotate by dragging:

1 Select the object you want to rotate.

2 Select the rotate tool .

3 Choose one of two options:

• Drag to rotate around the object’s center point.

• Click to set the point of origin around which you want the object to rotate; then move the arrowhead away from the point of origin, and drag in a circular motion. Hold down the Shift key to constrain the tool to multiples of

45 degrees.

202

Click to set point of origin.

Then drag to rotate.

To rotate a copy of the object instead of the object itself, hold down the Option key after you start to drag.

For finer control, drag farther from the object’s point of origin.

To rotate by specifying an angle:

1 Select the object you want to rotate.

2 Choose one of two options:

• To set the center point as the point of origin, double-click the rotate tool .

• To change the point of origin from which to rotate the object, select the rotate tool, hold down the Option key, and click the new point of origin.

203

3 Enter the rotation angle in degrees.

Enter a negative angle to rotate the object clockwise; enter a positive angle to rotate the object counterclockwise.

4 Choose one of the following options:

• To rotate the object, click OK.

• To rotate a copy of the object, click Copy.

• To place multiple copies of the object in a circular pattern around a point of origin, click Copy, and then choose

Arrange > Repeat Transform.

Set point of origin. Use Rotate dialog and Copy option to rotate.

204

Choose Arrange

Repeat Transform as needed.

Result

205

Rotating each object in a selection

The Rotate option in the Transform Each dialog box rotates each object in a selection around its own center point.

The effect differs from that of the rotate tool, which rotates objects in a selection around a common point of origin. You can also use the Rotate option to rotate objects a random amount, to create a more natural effect.

Rotate tool Rotate each

(specified) (random)

To rotate each object separately in a group:

Select the objects you want to rotate.

Choose Arrange > Transform Each.

206

3 In the Rotate text box, enter the angle by which you want to rotate the selected objects, between –360 degrees and 360 degrees.

4 Select the Preview option to preview the effect before you apply it.

5 Choose one of two options:

• To rotate the objects by the specified amount, click OK.

• To rotate the objects by a random amount, but by no more than the number of degrees specified in the

Rotate text box, select the Random option. Click OK.

207

Reflecting

Reflecting an object flips the object across an invisible axis that you specify.

Copying while reflecting lets you create a mirror image of an object.

To reflect by dragging:

1 Select the object you want to reflect.

2 Select the reflect tool .

3 Position the pointer on one point along the invisible axis across which you want the reflection to occur, and click to set the point of origin. The pointer changes to an arrowhead.

4 Position the pointer at another point along the invisible axis, and choose one of two options:

• Click to set a point across which to reflect the object. When you click, the selected object flips over the defined axis.

208

Click to set point of Result reflection.

• Adjust the axis of reflection by dragging the pointer instead of clicking.

Hold down the Shift key to constrain the tool to multiples of 45 degrees. As you drag, the invisible axis of reflection rotates around the point you clicked in step 3. When the image is in the desired position, release the mouse button.

Drag reflect tool . . . to rotate axis of reflection.

209

For finer control over the reflection, drag farther from the object’s point of origin.

To reflect by specifying an axis:

1 Select the object you want to reflect.

2 Choose one of two options:

• To set the center point as the point of origin, double-click the reflect tool .

• To change the point of origin from which to reflect the object, select the reflect tool, hold down the Option key, and click the new point of origin.

3 Select the axis across which you want the object to be reflected. You can reflect an object across a horizontal, a vertical, or an angled axis.

Point of origin set at top of object

Reflect-copy across vertical axis

210

If you choose an angled axis, enter the desired angle of reflection in degrees, relative to the x axis. Positive angles reflect the axis counterclockwise; negative angles reflect it clockwise.

4 Choose one of two options:

• To reflect the object, click OK.

• To reflect a copy of the object, click Copy.

211

Scaling

Scaling an object enlarges or reduces it horizontally (along the x axis), vertically

(along the y axis), or both horizontally and vertically, relative to the point of origin you designate. The default point of origin is the object’s center point.

Vertical Horizontal Both

See also Scaling each object in a selection .

To scale by dragging:

1 Select the object you want to scale.

2 Select the scale tool .

3 Choose one of two options:

• Select the object, and drag to resize it around the center point.

212

• Click to set the point of origin from which you want the object to be resized; then move the pointer away from the point of origin, and drag to scale the object.

Click to set point of origin.

Then drag to scale.

To scale the object uniformly, hold down the Shift key as you drag.

To scale a copy of the object instead of the object itself, hold down the

Option key before you release the mouse button.

For finer control over scaling, start dragging farther from the point of origin.

213

To scale by specifying scale factors:

1 Select the object you want to scale.

2 Select the scale tool .

3 Choose one of two options:

• To set the center point as the point of origin, double-click the scale tool.

• To change the point of origin from which to scale the object, select the scale tool, hold down the Option key, and click the new point of origin.

4 Choose one of two options:

• Select the Uniform Scaling option and enter a percentage in the text box to preserve the relative height and width of the object. With uniform scaling, you can also choose to preserve line weights or to scale them. If you scale line weights, the line weights of all stroked paths (as specified in the Paint Style dialog box) are scaled along with the objects.

214

You can also choose to scale line weights automatically whether you scale objects by dragging or by the

Scale dialog box. To do this, choose the

Scale Line Weight option in the General

Preferences dialog box.

Scale Line Weight option on

Scale Line Weight option off

• Select the Nonuniform Scaling option and enter the horizontal and vertical scale factors as percentages to scale the height and width separately. The scale factors are relative to the specified point of origin and can be negative numbers.

When scaling non-uniformly, line weights are not scaled.

5 Choose one of two options:

• To scale the object, click OK.

• To scale a copy, click Copy.

215

Scaling each object in a selection

The Scale option in the Transform Each dialog box scales each object in a selection around its own center point. The effect differs from that of the scale tool, which resizes objects in a selection around a common point of origin. The

Scale option also lets you scale objects a random amount, to create a more natural effect.

Scale tool Scale each

(specified) (random)

To scale each object individually in a group:

1 Select the objects you want to scale.

2 Choose Arrange > Transform

Each.

216

3 In the Scale Horizontal and Vertical text boxes, enter the percentage by which to scale the selected objects, between –4000% and 4000%.

4 Select the Preview option to preview the effect before you apply it.

5 Choose one of two options:

• To scale the objects by the specified amounts, click OK.

• To scale the objects randomly, but no more than the percentages specified in the Horizontal and Vertical text boxes, select the Random option. Then click OK.

217

Shearing

Shearing an object slants, or skews, the object along the axis you specify. Copying while shearing is useful for creating cast shadows.

Vertical Horizontal Both

To shear by dragging:

1 Select the object you want to shear.

2 Select the shear tool .

3 Choose one of two options:

• Drag the object to shear using the object’s center point as the point of origin.

218

• Click to set the point of origin from which you want the object to be sheared; then move the pointer away from the shear axis, and drag in the direction you want to shear the object.

Hold down the Shift key to constrain the tool to multiples of 45 degrees.

Select object. Then drag with shear tool.

To shear a copy of the object instead of the object itself, start dragging, and then hold down the Option key.

For finer control over shearing, start dragging farther from the point of origin.

219

To shear by specifying an angle and an axis:

1 Select the object you want to shear.

2 Choose one of two options:

• To set the center point as the point of origin, double-click the shear tool .

• To change the point of origin from which to shear the object, select the shear tool, hold down the Option key, and click the point of origin.

3 Enter the new shear angle. The shear angle is the amount of slant to be applied to the object, relative to a line perpendicular to the shear axis.

Note: Contrary to the way the program works with other transformation tools, the shear angle is calculated clockwise from the current axis.

4 Specify the axis along which the object is to be sheared. You can shear an object along a horizontal, a vertical, or an angled axis.

220

If you choose an angled axis, enter the angle of the axis that you want, in degrees, relative to the x axis.

Original Shearing by a specified angle

5 Choose one of two options:

• To shear the object, click OK.

• To shear a copy of the object, click Copy.

221

Distorting

The Free Distort filter varies the size and shape of an object.

To distort an object:

1 Select the object to distort.

2 Choose Filter

Distort

Free Distort.

The object’s image appears in the

Distort box. (Deselect the Show Me option if you don’t want a preview.)

Corner point Distort box

Original object

3 Drag a corner point, representing a boundary of the object, to distort it.

To revert to the original shape, click

Reset.

4 Click OK.

222

Blending shapes

Use the blend tool to create shaped blends made from a series of individual objects, each having a single stroke, fill color, or both. For rules on blending shapes and their colors, see About blending .

Important: To create linear or radial blends between two or more colors, use the Gradient palette. (For more information, see Creating and working with gradient fills .

To create a blend:

1 Place the two objects at the desired distance from each other.

2 Select the objects.

3 Select the blend tool .

4 Click an anchor point on each selected object. If you are blending open paths, select an endpoint on each path.

223

The Blend dialog box displays a recommended number of steps, along with the percentage of change in the first and last steps, based on the two colors you are blending.

For example, if you blend an object that is filled with 100% black with an object that is filled with 100% white, the program enters 254 in the Number of Steps text box because 254 is the maximum number of printable gray values between black and white on a high-resolution output device. (The total number of printable colors is 256—the starting color, the ending color, and 254 colors in between.) If one object is 50% black and the other is 100% white, the program enters 127 in the Number of

Steps text box.

Note: For further suggestions on how blends can be designed for the bestquality printout, see Printing gradients and color blends .

224

5 To change the number of steps in the blend, enter a whole number between

1 and 1000 in the Number of Steps text box.

6 To modify the percentage of change from the starting shape to the ending shape, enter any number between –100 and 200 in the First Blend and Last Blend text boxes. The default values are determined by the value in the Number of

Steps field.

For example, if you specify 15 steps, the

First Blend and Last Blend text boxes display 6.25% and 93.75%, respectively.

This means that the first step in the blend will occur 6.25% of the way between the two selected objects, and the last blend will occur 93.75% of the way between them.

225

7 Click OK. The entire set of blended objects (excluding the original objects) is selected and grouped.

Select anchor point on first object.

Select anchor point on second object.

Result

226

About blending

The Adobe Illustrator blend tool lets you create a series of intermediate objects and colors between two selected objects. You can blend between two open paths (such as two different lines), or between two closed paths (such as a circle and a square). Depending on the way you paint the objects you are blending, you can produce airbrush effects such as complex shading, highlighting, and contouring.

One of the simplest uses for the blend tool is to create and distribute shapes evenly between two objects. For example, you can create a series of evenly spaced bars by using the blend tool.

Two objects selected

227

Blend tool applied to distribute shapes evenly

You can also blend between two open paths to create a smooth transition between objects, or you can combine blends of colors and objects to create color transitions in the shape of a particular object.

The following rules apply to blending shapes and their associated colors using the blend tool. (A beep warns you if you have incorrectly selected objects to blend.)

• You can blend between only two objects at a time.

• You cannot blend between groups of objects. You can, however, use the direct-selection tool to select the components of groups and blend between the components.

228

• You cannot blend between an open path and a closed path. Both paths must be either open or closed.

• You cannot blend compound paths.

• If you blend between one object painted with a process color and another object painted with a custom color, the blended shapes are painted with an appropriate process color. If you blend between two different custom colors, process colors are used to paint the intermediate steps. If, however, you blend between tints of the same custom color, the steps are all painted with percentages of the custom color.

Note: If you are preparing artwork containing blends for separations, you can use tints to minimize the number of separations needed. To generate a custom-color blend between a custom color and white, use a 0% tint of the custom color instead of process white.

• You can blend between two patterned objects if they are filled with the same pattern.

229

Applying special effects to graphic objects

Illustrator provides a variety of filters for changing an object’s shape and path direction.

See

• Roughening

• Scribbling and tweaking

• Twirling

• Punking and bloating

• Rounding corners

• Adding drop shadows.

230

Roughening

The Roughen filter moves anchor points in a jagged array from the original object, creating a rough edge on the object.

Original Rounded Jagged

To roughen an object:

1 Select the object you want to roughen.

2 Choose Filter

Distort

Roughen.

3 Set the size of the distortion by dragging the Size slider or entering a value between 0% and 200% in the

Size text box.

231

4 Specify the details per inch by dragging the slider or entering a value between 0 and 1000 in the Detail text box.

5 Select the type of distortion you want around each anchor point—Smooth (for soft edges) or Corner (for sharp edges).

6 Select the Preview option to preview the effect before you apply it.

7 Click OK.

232

Scribbling and tweaking

The Scribble option randomly moves anchor points away from the original object. The Tweak option moves anchor points on the selected object by the amount you specify.

Original Scribble Tweak

To scribble or tweak an object:

1 Select the object you want to scribble or tweak.

2 Choose Filter

Distort

Scribble and

Tweak.

233

3 Choose any of the following options:

• To randomly move anchor points away from the original object, select the

Scribble option. In the Horizontal and

Vertical text boxes, enter the amount to move points, between 0% and 100%, or drag the sliders.

• To move anchor points on the selected object, select the Tweak option. In the

Horizontal and Vertical text boxes, enter the amount to move points, between

0 and 100 points, or drag the sliders.

• To move anchor points, select the

Anchor Points option.

• To move control points that lead into anchor points on the path, select the In

Control Points option.

• To move control points that lead out of anchor points on the path, select the

Out Control Points option.

4 To preview the effect before you apply it, select the Preview option.

5 Click OK.

234

Twirling

The Twirl filter and the twirl plug-in tool rotate a selection more sharply in the center than at the edges.

Original 160˚ 320˚

To twirl an object:

1 Select the object you want to twirl.

2 Choose one of the following options:

• Choose Filter

Distort

Twirl. Enter a value for the twirl angle from –999 to

999, and click OK.

• Select the twirl plug-in tool , and drag the object clockwise or counterclockwise.

235

Punking and bloating

The Punk and Bloat filters curve objects inward and outward from their anchor points.

Original

Punk filter

-20˚ -60˚

Original

Bloat filter

20˚ 60˚

236

To bloat or punk an object:

1 Select the object with a selection tool.

2 Choose Filter > Distort > Punk and

Bloat.

3 Drag the slider toward Punk to curve the object inward from its anchor points, and move the anchor points outward; drag the slider toward Bloat to curve the object outward from its anchor points, and move the anchor points inward. Values range from 0% to 100%.

4 To preview the effect before you apply it, select the Preview option.

5 Click OK.

237

Rounding corners

The Round Corners filter converts the corner points of an object to smooth curves.

Original 3-point 8-point

To round corners on an object:

1 Select the object whose corners you want to round.

2 Choose Filter

Stylize

Round

Corners.

3 Enter a value, in points, in the Radius text box to determine the shape of the rounded curve.

4 Click OK.

238

Adding drop shadows

The Drop Shadow filter creates a threedimensional shadow effect on any selected object. You can offset the drop shadow any distance from your object along the x or y axis, as well as vary the darkness of the drop shadow.

Original Grouped Ungrouped shadows shadows

Drop Shadow filter

To create a drop shadow:

1 Select the object for which you want to create the drop shadow.

2 Choose Filter > Stylize > Drop

Shadow.

3 Enter the distance you want the drop shadow to be offset from the object on the x axis and the y axis.

239

4 Enter the percentage darkness (% of black added) you want for the drop shadow. 100% creates a multicolored black, unless the original shape is gray

(which creates a shadow of 100% black);

0% does not change the color of the drop shadow from that of the selected object.

5 To make the shadow part of the object rather than a separate object in the background, select the Group

Shadows option.

For example, if you have two objects currently selected, one overlapping the other, grouping the shadows makes the shadow of the top object appear on top of the bottom object. If you do not group the shadows, the shadows of both selected objects appear behind the bottom object.

6 Click OK.

240

Changing gradients and patterns into objects

The Expand command converts gradients and patterns into a set of masked objects. This command can be useful if you are having difficulty printing these types of objects.

Gradient before and after Expand filter applied

Pattern before and after Expand filter applied

241

To convert gradients and patterns into objects:

1 Select an object that is filled or stroked with a gradient or pattern.

2 Choose from the following options:

• Choose Object > Expand. If you are expanding a gradient, in the Expand dialog box, enter the number of steps to which you want to convert the gradient, and click OK. Any patterns are automatically expanded.

• To expand a gradient using the last number of steps entered in the Expand dialog box, hold down the Option key as you choose Object > Expand.

242

Changing vector graphics into bitmap images

The Rasterize command converts vector objects into a bitmap image in TIFF format. You can control the resolution and whether to delete the original selection or paste a TIFF copy over it.

Once converted, you can apply plug-in filters, such as those designed for

Adobe Photoshop, to the image as you would with any placed image. However, you cannot apply vector tools and commands (such as the type tools and the

Pathfinder commands) to modify the bitmap image. (For information on

TIFF images, see TIFF file format .)

Vector graphic Bitmap conversion with

Wave filter applied

243

To create a bitmap version of artwork:

Select the object you want to convert.

Choose Object > Rasterize.

3 Choose a resolution from the Resolution pop-up menu: Screen for monitor output, Medium for laser printer output,

High for imagesetter output; or enter a value in the Other text box. See Resolution and screen frequency basics for more information on resolution.

4 If you do not want to smooth the jagged edges around the bitmap image when it is converted, deselect the Antialiased option (the default).

5 If you do not want to create a mask for the bitmap image that makes its background appear transparent, deselect the Create Mask option (the default).

6 Choose an image format for the conversion from the pop-up Format menu: you can generate a 1-bit bitmap image, a grayscale image, or a color image.

7 Click OK.

244

Applying special effects to bitmap objects

Plug-in filters let you alter the look of bitmap images in artwork. You can create impressionistic or mosaic effects, distort images, and produce various other interesting effects.

You can use any of the plug-in filters supplied with Adobe Photoshop version

3.0.4 or later in Adobe Illustrator. You can also use the Gallery Effects filters included on the Adobe Illustrator

Deluxe CD-ROM disc. (See the Adobe

Gallery Effects User Guide for information on using Gallery Effects filters.)

For information on placing a bitmap image in Illustrator, see About importing and exporting artwork .

See also

• Changing vector graphics into bitmap images.

• Creating a tiled effect on bitmap images

• Colorizing a 1-bit image

245

Creating a tiled effect on bitmap images

The Object Mosaic filter creates sharp definition in an image by clustering pixels of similar color values together into individual tiles. You can control the tile size, the spacing between tiles, and the total number of tiles, and preserve the proportions of the original image when creating the mosaic copy.

The Object Mosaic filter works with any type of bitmap image format Illustrator can place, as well as with bitmap images created with the Rasterize command.

(See Changing vector graphics into bitmap images for more information.)

246

When the Object Mosaic filter acts on a bitmap image, it creates a tiled copy, leaving the original bitmap image intact.

Original bitmap image

Object Mosaic filter applied

To create a tiled effect on a copy of a bitmap image:

1 Select a bitmap image.

2 Choose Filter

Create

Object

Mosaic.

The dimensions of the bitmap image are displayed at the top left of the Object

Mosaic dialog box.

3 Choose from the following options:

• Enter New Size values to determine the length and width of the mosaic in points.

247

• Enter Tile Spacing values to determine the distance in points between each tile in the mosaic.

• Enter Number of Tiles values to determine the number of tiles horizontally and vertically in the mosaic.

• Select the Lock Width option and click

Use Ratio if you’ve changed the width for the mosaic and want to preserve the height-to-width ratio of the original bitmap image. This action calculates the appropriate number of tiles to use for the height of the mosaic, based on the number of tiles for the width.

• Select the Lock Height option and click Use Ratio if you’ve changed the height for the mosaic and want to preserve the height-to-width ratio of the original bitmap image. This action calculates the appropriate number of tiles to use for the mosaic’s width, based on the number of tiles for the height.

• Select the Color option or Grayscale option to place the image as either a color or grayscale image.

4 Click OK.

248

Colorizing a 1-bit image

Using the Paint Style palette, you can specify the color you want to give to the black portion of 1-bit TIFF images.

Original 1-bit image Colorized

To colorize a 1-bit TIFF image:

1 Select the 1-bit TIFF image.

2 Use the Paint Style palette to paint the image with black, white, a process color, or a custom color.

249

Using the Pathfinder filters to modify shapes

The Pathfinder filters combine, isolate, and subdivide objects, and build new objects formed by the intersections of objects. See Setting Pathfinder preferences for information on setting Pathfinder filter options.

Most of the Pathfinder filters create compound paths. A compound path is a group of two or more paths that are painted so that overlapping paths can appear transparent. Except where noted, the objects created by all Pathfinder filters are assigned the same paint style as the top object in the current layer’s stack .

Note: Applying Pathfinder filters to complex selections, such as blends, may require large amounts of RAM. If you are unable to use a Pathfinder filter successfully, try increasing the memory size allotted to the Adobe Illustrator program.

250

To use the Pathfinder filters:

1 Select the objects to which to apply the filter.

2 Choose Filter > Pathfinder, and then choose the filter you want to apply:

• The Unite filter traces the outline of all selected objects as if they were a single, merged object. Any objects inside the selected objects are deleted.

• The Intersect filter traces the outline of all overlapping shapes in the selected objects, ignoring any nonoverlapping areas. It works on only two objects at a time.

• The Exclude filter traces all nonoverlapping areas of the selected objects, making the overlapping areas transparent.

• The Minus Front filter subtracts the frontmost selected objects from the backmost object. You can use this filter to delete areas of your illustration by adjusting the stacking order .

jump to art

251

• The Minus Back filter subtracts the backmost selected objects from the frontmost object. You can use this filter to delete areas of your illustration by adjusting the stacking order .

• The Divide filter divides a piece of artwork into its component filled faces

(a face is an area undivided by a line segment). The resulting faces can then be ungrouped and manipulated independently of each other.

Note: If the Divide and Outline Will

Extract Unpainted Artwork option is on in the Pathfinder Options dialog box, unfilled objects in the selected artwork are deleted when you apply the Divide or the Outline filter. For more information, see Setting Pathfinder preferences .

jump to art

252

• The Outline filter divides an object into its component line segments, or edges. Each edge can be ungrouped and independently manipulated. This filter is useful for cropping. For example, by drawing a shape around a set of objects and applying the Outline filter, you can cut away everything that falls outside the shape.

This filter is also useful for preparing an image when you need to create a trap for overprinting objects. For a complete description of trapping, see About traps .

• The Trim filter removes the part of a filled object that is hidden. It does not merge objects of the same color.

• The Merge filter removes the part of a filled object that is hidden. It merges any adjoining or overlapping objects filled with the same color.

• The Crop filter divides an image into its component filled faces and then deletes all the parts of the image that fall outside the boundary of the topmost object. jump to art

253

Pathfinder filters

Unite creates a single merged shape from overlapping, separate original shapes.

Intersect creates a new object from the common space shared by two shapes.

Exclude knocks out the area where one shape overlaps another.

Minus Front subtracts the frontmost object from the backmost object.

Minus Back subtracts the backmost object from the frontmost object.

Divide creates separate objects from the artwork’s faces; segments are then filled.

return to text

Pathfinder filters, continued

Outline creates independent, stroked lines divided at each intersection.

Trim removes hidden part of filled paths without merging.

Merge removes hidden filled paths; merges adjacentx/ overlapping objects filled with same color.

Crop divides shapes and crops images outside of topmost shape.

return to text

Setting Pathfinder preferences

The Pathfinder Options dialog box lets you change the precision of Pathfinder filters, and remove redundant points or unpainted artwork created by the filters.

To set Pathfinder options:

1 Choose Filter

Pathfinder

Options.

2 Choose from the following options:

• Enter a value in the Precision text box to set the precision of the Pathfinder filters calculations. The more precise the calculation, the more accurate the drawing, and the more time is required to carry out a Pathfinder filter.

• Choose the Remove Redundant Points option to delete any points created on top of each other as a result of using a

Pathfinder filter.

• Choose the Divide and Outline Will

Extract Unpainted Artwork option to delete unfilled objects in the selected artwork, as a result of using the Divide or Outline filters.

3 Click OK.

256

Converting strokes to filled objects

The Outline Path filter traces the outline of all stroked paths within the selected artwork and substitutes a filled object with the same width as the original stroked path. This filter lets you modify the outline of an object more than you could if it were only a stroke.

You can also use this filter to create an overlay of your original artwork that strips out all stroked lines and replaces them with compound filled paths. The

Outline Path filter can be useful when you prepare artwork for trapping color separations, as described in Step 4:

Create a trap to compensate for misregistration on press .

Selected path Outline Path filter applied

257

To create an outline of your artwork:

1 Select the artwork you want to outline. The image can contain both filled and stroked paths, but only stroked paths will be outlined.

2 Choose Filter

Objects

Outline

Path. The outline replaces the original artwork and is selected.

258

Cutting objects with objects

The Apply Knife command in the Object menu and the knife tool in the plug-ins menu cut objects in a designated shape.

The object you cut must be ungrouped.

The Apply Knife command in the Object menu lets you use a selected object as a

“cookie-cutter” or stencil to cut through other objects. The Apply Knife command slices overlapping objects into discrete shapes according to the selection’s boundaries, and discards the original selection.

The knife tool in the plug-ins toolbox slices an object along a freehand path you draw with the tool, and copies the cut portion of an object.

To cut objects using the Apply Knife command:

1 Select the object that you want to use as a cutter, and position it on top of the object or objects that you want to cut.

(To retain the original selection, save a copy elsewhere in your file.)

259

2 Choose Object > Apply Knife.

Object selected Apply Knife command applied

Resulting objects pulled apart

The shapes that result are ungrouped and selected.

260

To cut objects using the knife tool:

1 Choose one of two options:

• To copy objects as you cut them, double-click the knife tool in the plugins toolbox. Select the Copy Objects option, and click OK. Drag the knife tool pointer over an object to cut it.

• To cut objects along a path you draw, click to select the knife tool in the plugins toolbox. Drag the knife tool pointer over an object to cut it.

261

Working with compound paths

A compound path consists of two or more overlapping objects combined into a single compound object. Using the Compound Paths command enables you to create paths that have transparent interior spaces where the original objects overlapped (such as the interiors of the letters o and g). Creating compound paths lets you create more complex objects than you could easily create using the drawing tools or Pathfinder filters. For example, reversing paths within compound paths lets you adjust the transparency of paths.

Original: object on top of textured background

Result: object turned into compound path, revealing background

262

Compound paths act as grouped objects. Therefore, if you want to select part of a compound path, you must use the direct-selection tool .

Note: If you use complex shapes as compound paths, or if you use several compound paths in a file, you may have problems printing the file. If you experience printing problems, simplify or eliminate the compound paths.

See also

• Creating compound paths

• Reversing paths within compound paths

263

Creating compound paths

A compound path is two or more paths painted to appear transparent when they overlap. Turning an object into a compound path paints all objects in the compound path with the attributes of the backmost object in the stacking order. To understand how these paths work, try working in two windows— to preview artwork in one window as you work in Artwork view in the other.

To create a compound path:

1 Make sure that objects to be seethrough are in front of the background object in the painting order.

2 Select all the objects that you want to include in the compound path.

3 Choose Object > Compound Paths >

Make. Holes appear where paths overlap.

To release compound paths:

1 Select the compound path to release.

2 Choose Object

Compound Paths

Release. The objects’ previous paint attributes are not reapplied.

264

Reversing paths within compound paths

When creating a compound path, you can adjust whether overlapping paths appear transparent or filled with the

Reverse Path Direction option in the

Attributes dialog box.

Compound path: Reversed option inner circle selected changed on inner circle

To reverse paths in a compound path:

1 Use the direct-selection tool to select a part of the compound path to reverse.

Do not select the entire compound path.

2 Choose Object

Attributes.

3 Select or deselect the Reverse Path

Direction option. Click OK.

265

Working with masks

Masks crop part of an image so that only a portion of the image appears through a shape or shapes you create. In Adobe

Illustrator, you mask objects using the

Make Mask command

Masking: Masking object placed on top of image

Result: Image appears only through mask

Note: If you use complex shapes as masks, or if you use several masks in a file, you may have problems printing the file. If you experience printing problems, simplify or eliminate the masks.

266

To see whether an object is a mask:

1 Select the object.

2 Choose Object > Attributes. The

Attributes dialog box lists the masking status of the selected object.

You can also select all masks in your artwork using the Select Masks command .

See also

• Creating masks

• Modifying masks

• Filling and stroking masks

267

Creating masks

A masking object can consist of a single path or a compound path.

To mask objects:

1 Draw or select the object you want to use as a mask.

2 Make sure that the object is on top of the objects you want to mask.

When masking objects on different layers, keep in mind that objects on intermediate layers become part of the masked artwork. See About painting and About layers for more information.

3 Select the mask and the objects you want masked.

Mask

268

Objects to be masked

4 Choose Object > Masks > Make. The mask loses its paint attributes and is assigned a fill and stroke value of None.

Mask and objects selected

Mask command applied

To undo the effects of a mask:

1 Select the objects you no longer want to use as a mask.

2 Choose Object > Masks > Release.

Because the mask was assigned a fill and stroke value of None, it is not visible unless you select it or assign it new paint attributes.

269

Modifying masks

Once you have created a mask, the mask and the masked objects can be selected and modified as any other object.

To find out what objects are affected by a mask:

1 Choose the direct-selection tool .

2 Click the mask once to select it;

Shift-click to select the masked objects, until all are selected.

To add an object to masked artwork:

1 Select the object to add to the masked artwork; drag it in front of the mask.

2 Cut the selected object.

Selection in front of mask

Selection cut

270

3 Use the direct-selection tool to select an object within the masked artwork.

4 Choose Edit

Paste in Front or Edit

Paste in Back. The object is pasted in front of or behind the selected object and becomes part of the masked artwork.

Object in mask selected

New object pasted in back

To remove an object from masked artwork:

1 Use the direct-selection tool to select the object you want to remove; then choose Edit

Cut.

271

Selecting masks

The Select Masks command finds and selects masks in the document. If there aren’t any objects selected, the command selects all of the masks in your document. If objects are selected, the filter deselects any of those objects that are not masks.

To select masks:

Choose Filter > Select > Select Masks.

272

Filling and stroking masks

The Fill & Stroke for Mask command creates two objects that serve as the fill and stroke for a mask. The command places the stroked object on top of the mask, and it places the filled object behind the masked objects.

To apply a fill and stroke to a mask:

1 Select the mask you want to fill or stroke.

2 Choose Object

Paint Style.

3 Select the Auto option, and choose a fill or stroke for the mask.

273

4 Choose Filter > Create > Fill & Stroke for Mask; then click OK.

Mask selected Fill & Stroke for

Mask filter applied

274

Painting

About painting

Using the Paint Style palette

Setting paint attributes

Adjusting colors

Saturating and desaturating colors

Inverting colors

Creating transparent color effects

Blending colors between objects

About custom colors, gradients, and patterns

Outlining paths with patterns

Selecting colors using other color systems

Making color changes

Selecting objects with the same fill or stroke options

Deleting unpainted objects

275

Painting, continued

Setting stroke attributes with the

Paint Style palette

Creating wavy and zigzag lines

Adding arrowheads

Copying and applying paint attributes with the eyedropper and paint bucket tools

276

About painting

Paths and objects are painted with the current paint attributes set in the Paint

Style palette. You can select an object and change its paint attributes at any time. The new paint attributes are then assigned to all new objects you create

(except type) until you change the attributes again. See Setting paint attributes for more information.

Filling an object paints the area enclosed by the path. Stroking an object outlines the path. Paths can be filled or stroked, or filled and stroked. You can also create unfilled or unstroked paths by using the None option in the Paint Style palette.

277

Filling and stroking affect closed and open paths differently, as the following examples illustrate. Open paths are filled as if the endpoints were connected by a straight line.

Closed paths Open paths

See also

• Using the Paint Style palette

• Setting paint attributes

278

Using the Paint Style palette

You use the Paint Style palette to set paint attributes for new and existing objects. All newly created objects are painted with the paint attributes currently displayed in the Paint Style palette.

See also About painting and Setting paint attributes .

The Paint Style palette consists of three panels: the left panel, containing the paint swatches and the Fill and Stroke boxes; the right panel, containing the color selection options; and the lower panel (closed by default), containing the line attribute controls.

jump to art

To change which panels are displayed:

Choose one of the following options:

• Choose the display you want from the

Panel Display menu in the upper right corner of the palette.

• Click the desired panel in the palette icon to the left of the Panel Display menu.

279

The Paint Style palette

Click on any option for information on that option.

Color selection options

Fill and stroke boxes

Palette viewing options

Paint swatches

Process color or tint sliders

Stroke attributes return to text

Setting paint attributes

The following procedure describes how to set fill and stroke attributes using the

Paint Style palette. See Using the Paint

Style palette and About painting for more information.

To set paint attributes:

1 Select one or more paths whose paint attributes you want to change, or deselect all paths in your artwork if you want the attributes to apply only to new paths you create.

2 Choose Object > Paint Style or

Window > Show Paint Style.

If an object is selected, the current paint attributes of the object are displayed in the Fill and Stroke boxes, the most recently applied paint swatch is highlighted, and the names of the fill and stroke are displayed under the paint swatches.

If several selected objects have different paint attributes, the Fill and Stroke boxes display a question mark, and the attributes are defined as “Mixed.”

281

Changing a “Mixed” fill or stroke changes the color of all selected paths.

If the objects have different stroke weights, the Stroke Weight box is empty.

Any common attributes, including line attributes and individual values of C (cyan), M (magenta), Y (yellow), and K (black) are displayed and can be adjusted. This feature allows you to adjust attributes common to different objects without altering differing paint attributes.

3 Select the Auto option to apply the palette settings to all selected objects in the artwork as you enter the settings.

Deselect this option and use the Apply button to apply the palette settings manually.

4 Select the Fill box to set the fill attributes , or select the Stroke box to set the stroke attributes . The currently active box is underlined.

5 Choose a fill or stroke using one of the following procedures:

282

• Select the None, White, or Black color selection option to fill or stroke with none, white, or black.

• Select the Process Color, Custom

Color, Pattern, or Gradient color selection option and then choose a color from the scrolling list or use the sliders to mix a process color.

• Click one of the palette paint swatches to fill or stroke with the color displayed in that swatch.

6 Select line attributes .

If you selected the Auto option, the paint attributes are automatically applied.

7 If the Auto option is not selected, apply the paint attributes using one of the following methods:

• Click Apply in the palette.

• Press the Enter key on the keyboard.

• Double-click the Fill or Stroke box in the palette (regardless of which box is selected).

• Double-click a swatch to apply the color to a selected object.

283

Using the paint swatches

You can use the scrolling list of paint swatches on the left of the Paint Style palette to store up to 225 colors in the palette. The paint swatches you define are saved with the document. This feature lets you create customized sets of paint for different documents.

The default set of swatches is defined in the startup file .

Paint Style swatches can store custom and process colors, blends, and patterns. Clicking a paint swatch displays that color’s name below the list of swatches.

To define a set of paint swatches:

1 Choose a color, gradient fill, or pattern using the procedures described in Setting paint attributes .

2 Choose one of the following options:

• Drag the new color, gradient fill, or pattern from the Fill or Stroke box to any paint swatch.

284

• Option-click a paint swatch to apply the color to that swatch. (To copy a swatch to a new location, hold down the

Option key and drag the swatch.)

• Drag the name of the custom color, pattern, or gradient from the scrolling list on the right side of the palette to a paint swatch.

The top four swatches—None, White,

Black, and Process White—cannot be replaced.

3 Continue choosing colors and

Option-clicking swatches as needed.

4 Save the document to save the new paint swatches in the palette.

To clear paint swatches:

Hold down the Command key to display the scissors icon; click the swatch. To clear a group of swatches, hold down the

Command key; drag over the swatches.

You cannot undo this procedure.

To replace an existing swatch with the current fill or stroke color:

Hold down the Option key; then click the swatch or drag a color onto it.

285

Filling objects and stroking lines with white, black, and none

To fill or stroke with white or black, select the White or Black option, respectively. You can also adjust the percentage, or tint, of black by typing a number in the text box or by adjusting the Tint slider until the shade is as you want it.

Using the White option produces the same results as choosing a CMYK mix of

0%. Using the Black option produces a one-color black of 100%, with no cyan, magenta, or yellow.

If you do not want a path to be filled or stroked, select the None option (the leftmost color selection option, which has a slash through it) from the palette. This option makes the fill or stroke transparent. When you first start Illustrator, the stroke attribute is set to None by default.

286

Creating a process color

You assign colors that will be printed with process inks by indicating percentages for cyan, magenta, yellow, and black. These are known as CMYK colors

(the letter “K” is used for black instead of

“B,” to prevent confusion with the color blue). You can either type the percentages in the Paint Style palette, or adjust the Cyan, Magenta, Yellow, and Black sliders until the color you want appears in the Fill or Stroke box in the palette.

Note: The Adobe Illustrator program creates an approximate screen representation for process and custom colors.

Because on-screen colors may be very different from your printed output, it’s important to calibrate your monitor and to make four-color proofs for any colors that you create. For information on calibrating your monitor, see Step 1:

Calibrate your color monitor .

287

To select a process color in the

Paint Style palette:

1 Select the Fill or Stroke box to indicate which attribute you want to change.

2 Select the Process Color option at the top of the palette. Four sliders and text boxes appear, one for each of the four process colors.

3 Choose one of the following methods to adjust the process values:

• Enter a value from 0% to 100% in each of the four process color boxes, using the Tab key to move from one text box to the next.

• Drag the triangles below the sliders to adjust each process color value.

• Click anywhere along a slider to adjust the triangle: Option-clicking to the right or left of a triangle moves the triangle in 1% increments; Shift-

Option-clicking moves the triangle in

5% increments.

288

As you adjust each color value, the colors along the other sliders change to reflect the adjustment. For example, as you move the black slider to the right, black is added to the cyan, magenta, and yellow along the other three sliders.

The Fill or Stroke box (whichever is selected) displays the composite process color.

To adjust the overall color saturation without affecting the proportions of the individual CMYK components:

Hold down the Shift key and drag any slider triangle to adjust all triangles simultaneously.

289

Adjusting colors

The Adjust Colors filter lets you change the amounts of cyan, magenta, yellow, and black in objects of different colors.

This filter also lets you convert the fill or stroke color (or both) to a process color from a custom color or to a process

(four-color) black from a solid black.

Original Decrease Increase

Adjusting colors

To adjust colors:

1 Select the objects whose colors you want to adjust.

2 Choose Filter > Colors > Adjust Colors.

3 Drag the sliders or enter values between 0% and 100% in the Cyan,

Magenta, Yellow, and Black text boxes.

290

4 Choose any of the following options:

• To convert the fill or stroke to a process color from a custom color, select the Fill or Stroke (or both) options, and select the Custom to

Process option.

• To convert a solid black to a four-color black, select the Fill or Stroke (or both) options, and select the Black to Process option.

• To preview the effect of adjusting the color, select the Preview option.

5 Click OK.

291

Saturating and desaturating colors

The Saturate filter darkens or lightens the colors of selected objects by increasing or decreasing the percentages of CMYK color values or the percentage tint of custom colors.

Original Desaturate Saturate

To saturate or desaturate colors:

1 Select the objects whose colors you want to saturate or desaturate.

2 Choose Filter

Colors

Saturate.

3 Drag the slider or enter a value from

–100% to 100% to increase or decrease the CMYK colors or the custom color tint.

4 Select the Preview option to preview the effect.

5 Click OK.

292

Inverting colors

The Invert Colors filter creates a color negative (or inverse) of the selected object. When you invert an image, its color values on the CMYK scale are converted to the inverse of the CMYK color values of the original. For example, if an object is filled with 0% cyan, 0% magenta, 100% yellow, and 25% black, the inverted image will contain 100% cyan, 100% magenta, 0% yellow, and

75% black.

Original Inverse

To invert colors:

1 Select the objects whose colors you want to invert.

2 Choose Filter > Colors > Invert Colors.

293

Creating transparent color effects

By using the Hard and Soft filters, you can mix the colors in overlapping painted objects. For information on creating transparent effects by overprinting, see Step 3: Select overprint options for colors you want to appear transparent .

Original Hard Soft

294

Using the Hard filter

The Hard filter mixes two or more colors from overlapping objects. The mix color is created by combining the highest

CMYK value from each color in the selection. For example, if Color 1 is created from 20% cyan, 66% magenta, 40% yellow, and 0% black; and Color 2 is created from 40% cyan, 20% magenta, 30% yellow, and 10% black; the resulting hard mix color is 40% cyan, 66% magenta,

40% yellow, and 10% black.

To mix colors by combining their highest CMYK values:

1 Select the objects whose colors you want to mix.

2 Choose Filter > Pathfinder > Hard.

3 To convert any custom colors to process colors in the selected objects, select the Convert Custom Colors to

Process option.

4 Click OK.

295

Using the Soft filter

The Soft filter makes the top color of overlapping colors semitransparent and then divides the image into its component faces. You specify the amount of color to show through overlapping objects.If you overlap multiple objects, each object gets the selected level of transparency. A low value results in a low level of transparency; a high value produces a high level of transparency.

To specify how much color to show through overlapping objects:

1 Select the objects whose colors you want to mix.

2 Choose Filter

Pathfinder

Soft.

3 Enter a value between 1% and 100% in the Mixing Rate text box for the percentage of transparency in overlapping colors.

4 To convert any custom colors to process colors in the selected objects, select the Convert Custom Colors to

Process option.

5 Click OK.

296

Blending colors between objects

The Blend filters create a series of intermediate colors between a group of selected filled objects, based on the objects’ vertical or horizontal orientation, or on their stacking order. The filters do not affect strokes or unpainted objects. For more information on stacking order, see Stacking objects .

Original Blend Front to Back filter applied

To blend colors between filled objects:

1 Select three or more filled objects to blend.

297

2 Choose one of three options:

• To fill the intermediate objects with gradated blends between the frontmost and backmost filled objects, choose

Filter > Colors > Blend Front to Back.

• To fill the intermediate objects with gradated blends between the leftmost and rightmost filled objects, choose

Filter > Colors > Blend Horizontally.

• To fill the intermediate objects with gradated blends between the topmost and bottommost filled objects, choose

Filter > Colors > Blend Vertically.

298

About custom colors, gradients, and patterns

You use the Paint Style pattern to paint with custom colors , fill with gradients , and fill objects with patterns .

You can also create your own custom colors, gradients, and patterns. See

Creating and working with gradient fills , and Creating and working with patterns .

Custom color Gradient Pattern

Fills

Custom colors, gradients, and patterns you create and load into the Paint Style palette are saved with the current document. You can load other sets of custom colors, gradients, and patterns from other documents by using the Import

Styles command .

299

You can also customize your startup file so that custom colors, gradients, patterns, and swatches you use frequently are loaded when the program is opened.

Pattern option

Custom color option

Gradient option

300

Painting with custom colors

In Adobe Illustrator, a custom color may be a spot color from a color matching system or it may be a process color you have named and saved for easy editing or as a temporary placeholder for a spot color. When separated, custom colors are printed as individual separation.

(See About separations for more information.)

To paint with custom colors:

1 Select the objects you want to fill or stroke.

2 In the Paint Style palette, select the

Fill or Stroke box to indicate the attribute you want to change.

3 Select the Custom Color option at the top of the palette. A list of the available patterns appears.

4 Select the custom color you want from the list.

You can also type into the list to select a custom color; for example, if you’re using the PANTONE color

301

matching system, typing 200 would select PANTONE 200. For a screened percentage of that color, enter a percentage in the Tint text box, or drag the triangular slider until the color in the Fill or Stroke box appears as desired.

(When printing color separations using the Color Separation Setup dialog box, you can convert a spot color back to its process color components. See Separating custom colors as process colors , for information on how to do this.)

5 If the Auto option is not selected in the Paint Style palette, click Apply or press Return to paint the selected object.

302

Filling objects with patterns

You can apply patterns as fills or as paths that outline an object (see

Outlining paths with patterns ).

Note: Pattern tiles for fill and path patterns differ in their design and tiling.

(For more information, see How patterns tile .) For the best results, use fill patterns to fill objects, and path patterns to outline objects.

To fill an object with a pattern:

1 In the Paint Style palette, select the objects you want to fill.

2 Select the Fill box to indicate the attribute you want to change.

303

3 Select the Pattern option at the top of the palette. A list of patterns appears.

Pattern option

4 Select the name of a fill pattern.

In addition to the default list of patterns,

Illustrator comes with a large selection of patterns—including some 50 patterns from the Adobe Collector’s Edition: Pat-

terns and Textures. You can load patterns with the Import Styles command .

(Patterns used to stroke objects or fill type appear gray in Preview or Preview

Selection view, but they print correctly.)

5 If the Auto option is not selected in the Paint Style palette, click Apply or press Return to paint the selected object.

304

Filling an object with gradients

Objects cannot be stroked with gradients. For information on printing considerations when creating a gradient, see Printing gradients and color blends .

To fill an object with a gradient:

1 In the Paint Style palette, select the objects you want to fill.

2 Select the Fill box to indicate the attribute you want to change.

3 Select the Gradient option at the top of the palette. A list of the available gradients appears.

4 Select the name of a gradient, or click a gradient swatch that you want to use.

5 To change the angle of a linear gradient within the object, enter an angle for the in the Angle text box, located below the list of gradients, or use the gradient tool as described in Adjusting gradients with the gradient tool .

6 If the Auto option is not selected in the Paint Style palette, click Apply or press Return to paint the selected object.

305

Outlining paths with patterns

The Path Pattern filter lets you outline objects with patterns and create borders, frames, and decorative and ornamental effects. Path patterns differ from fill patterns in their design, tiling, and names—path patterns typically end with a suffix indicating whether they apply to the side, outer corner, or inner corner of a path. For illustrations of some effects you can create, see the Adobe Illustrator

Tutorial and Beyond the Basics.

You can choose path patterns from the

Path Pattern library of almost 200 designs, located on the Adobe Illustrator

Deluxe CD-ROM. (The Adobe Illustrator

Startup file and program disks contain a smaller collection of these designs.)

See also Creating and working with patterns .

When you select a pattern, you can resize and flip the pattern, and specify how precisely to apply the pattern to the path. You can also create different effects when applying the same pattern to a rectangular or circular path.

306

You can apply the same pattern to the sides and corners of an object, or you can vary the pattern, such as on squarecorner rectangles. Path pattern designs may include up to three pattern tiles to build a design for the sides, outer corners, and inner corners of objects.

To outline a path with a pattern:

1 If necessary, create the artwork that you will outline with patterns. For best results, fill and stroke the artwork with

None. (To better see your artwork, you can work in Artwork view.)

2 Select the object that you will outline with a pattern.

3 Open the file containing the path pattern that you want to use.

To use a pattern, you must first open the file containing either the pattern or its pattern tile. Illustrator path pattern file contain up to six separate designs.

4 Choose Filter > Stylize > Path

Pattern.

307

5 From the scrolling list, select a pattern. To select no pattern for part of a path, select None from the list. You can choose a different pattern for each part of the path.

The Adobe Illustrator path patterns are named with a suffix indicating the type of design: “.side” for side, “.outer” for the outer corner designs, and “.inner” for the inner corner designs.

6 Adjust the path pattern as desired as described in the following procedures:

• To apply a path pattern to part of a path

• To adjust how the pattern tile fits the path

• To scale a path pattern

• To flip a path pattern horizontally, vertically, or both

308

To apply a path pattern to part of a path:

1 In the Path Pattern dialog box, choose from the following options:

• Click the Sides box to select the option and apply the pattern to the sides of an object.

• Click the Outer Corner box to apply the pattern to the corners of a rectangle or polygon.

• Click the Inner Corner box to apply the pattern to the interior corners of an irregularly shaped object.

• To apply no pattern to a part of the path, click the appropriate Sides or

Corner option and select None from the scrolling list.

2 Click OK to apply the pattern to the path.

309

To adjust how the pattern tile fits the path:

1 In the Path Pattern dialog box, choose one of the three Tile Fitting options:

• Choose Stretch to Fit to lengthen or shorten the pattern tile to fit the object.

This option can result in uneven tiling.

• Choose Add Spacing to Fit to add blank space between each pattern tile to apply the pattern proportionately to the selected object. Let Illustrator determine the amount of space between tiles, or specify an amount in the Tile Size

Spacing text box, as described in step 2.

• If you are applying a pattern to a rectangle and want the pattern to tile evenly, select the Approximate Path option. This option offsets the pattern from the path, rather than centering it, to maintain even tiling.

2 To add spacing between pattern tiles

(such as for noncontinuous designs like dots or discrete shapes), enter a value in the Tile Size Spacing text box.

3 Click OK to apply the adjustments.

310

To scale a path pattern:

1 In the Tile Size section of the Path

Pattern dialog box, enter a new width or height for the pattern tile.

If applying a pattern to a circle, use a smaller width than the circle’s diameter for a donut effect, or match the tile’s width to the circle’s diameter for a solid effect.

Adjusting either the width or height adjusts the other value proportionately.

To scale the pattern tile, see Modifying patterns .

2 Click OK to apply the adjustments to the path.

311

To flip a path pattern horizontally, vertically, or both:

1 In the Path Pattern dialog box, select the Tile Position option to flip the pattern horizontally, vertically, or both.

2 Click OK.

312

Selecting colors using other color systems

Adobe Illustrator lets you select colors using other color systems—including the PANTONE® Process Color System ,

Toyo Ink Electronic Color Finder 1050 , the FOCOLTONE® COLOUR System , and the Trumatch™ color swatching system .

To load predefined custom colors into your palette:

Choose File > Import Styles , and open the file you want from the Color Systems folder.

The colors appear in the Paint Style palette and the Custom Color palette and can be edited and deleted as any other custom color. Custom colors are printed on separate plates; see About separations for more information.

313

Using the PANTONE

Matching

System

To use the PANTONE printing ink colors, first determine the ink color you want by using either the PANTONE Color

Formula Guide 747XR or an ink chart obtained from your printer. PANTONE books are available from print shops and graphic arts supply houses.

In addition, you can simulate the

PANTONE colors with process colors.

The PANTONE Process Color System includes more than 3000 CMYK combinations that can be used to generate

PANTONE color equivalents. To view simulated PANTONE colors, use the

PANTONE Process Color Simulator

747XR, which lists the percentages of cyan, magenta, yellow, and black needed to simulate a given PANTONE color. The PANTONE Process Color Simulator 747XR is available at most graphic arts supply stores or directly from

Pantone, Inc.

314

Select from PANTONE Coated, PANTONE

Uncoated, PANTONE Process, and PAN-

TONE ProSim custom colors. For more information, contact PANTONE at:

PANTONE, Inc.

590 Commerce Blvd.

Carlstadt, NJ 07072

(201) 935-5500

315

Using the Toyo Color Finder™ 1050

The Toyo Ink Electronic Color Finder™

1050, created by Toyo Ink Manufacturing Co., Ltd., provides more than 2000 colors, based on the most common printing inks in Japan. You can choose a color from one of two files. The Toyo 88 file contains 1050 colors from the Toyo

88 Color Finder 1050. The Toyo 91 file contains 624 colors from the Toyo 91

Process Color Finder.

Before assigning a color to a document, determine the ink color you want by referring to the corresponding Toyo

Color Finder 1050 Book. This book is available from printers and graphic arts supply stores.

Note: Some colors in the list may reproduce differently from the corresponding colors in the Toyo Ink color sample book.

An asterisk (*) indicates those colors.

Two asterisks indicate colors whose reproduced results differ even more from the matching colors in the color book. The color mismatch may also occur depending on printing

316

conditions. To obtain the same result as in the color book, use spot color ink for colors marked with one or two asterisks.

For more information, contact Toyo at the following address:

Toyo Ink Manufacturing Co., Ltd.

3-13 2-chome Kyobashi

Chuo-ku, Tokyo 104

(011) 81-3-3272-0781

317

Using the FOCOLTONE COLOUR

SYSTEM

The FOCOLTONE COLOUR SYSTEM provides 763 CMYK colors. FOCOLTONE colors help avoid prepress trapping and register problems by showing the overprints that make up the colors. All of the colors convert to spot colors with a single mix of CMYK inks.

You can choose a FOCOLTONE color using one of two files: one with the 763 colors arranged by their four-digit identification number; the other with the color swatches as they appear in the

FOCOLTONE Colour Swatch Book.

To obtain a copy of the swatch book with specifications for process and spot colors, overprint charts, and a chip book for marking up layouts, contact:

FOCOLTONE INTERNATIONAL, Ltd.

Churchview House

Penkridge

Acton Trussell, Stafford

ST170RJ

United Kingdom

(44) 0785-712667

318

Using the TRUMATCH color swatching system

The TRUMATCH color swatching system provides predictable CMYK color matching with more than 2000 achievable, computer- created colors.

TRUMATCH colors cover the visible spectrum of the CMYK gamut in even steps. The TRUMATCH COLORFINDER displays up to 40 tints and shades of each hue, each originally created in fourcolor process, and each reproducible in four colors on electronic imagesetters.

The system also includes four-color grays using different hues. For more information on the TRUMATCH system, contact TRUMATCH at the following address:

TRUMATCH, Inc.

25 West 43rd St., 8th Floor

New York, NY 10036

(212) 302-9100

319

Making color changes

To select objects whose paint attributes you want to change, you can use the selection tools or one of four filters in

Illustrator for Selecting objects with the same fill or stroke options . (For information on the selection tools, see Selecting objects .)

You can also make global changes to any fill or stroke identified by a name— custom colors, patterns, gradients, and named process colors— by changing the definition associated with the name.

(For more information on changing the definition, see Modifying custom colors , Modifying gradients , and

Modifying patterns .

320

Selecting objects with the same fill or stroke options

Four selection filters select objects with the same fill color, paint style (fill and stroke), stroke color, or stroke weight.

You can use these filters to edit various ungrouped objects the same way.

To select all objects with the same properties:

Choose any of the following options:

• To select all objects with the same fill color, select one or more objects with that fill color, or choose the fill color from the Paint Style palette. Choose

Filter

Select

Same Fill Color.

• To select all objects with the same fill, stroke, and stroke weight, select one or more objects with the same paint style, or choose the fill, stroke, and stroke weight attributes from the Paint Style palette. Choose Filter

Select

Same

Paint Style.

• To select all objects with the same stroke color, select one or more objects with the same stroke color, or

321

choose the stroke color from the Paint

Style palette. Then choose Filter > Select

> Same Stroke Color.

• To select all objects with the same stroke weight, select one or more objects with the same stroke weight, or choose the stroke weight from the Paint

Style palette. Choose Filter

Select

Same Stroke Weight.

Selected object

Other objects in file

Same fill

Same paint style

Same stroke color

Same stroke weight

Select filters

322

Deleting unpainted objects

Unpainted objects can make artwork less efficient and slow to print. You can create unpainted objects, for example, by inadvertently clicking a drawing tool in the artwork area, and then choosing another tool when the fill and stroke options are set to None. You can use the

Cleanup dialog box to delete unpainted objects.

To delete unpainted objects:

1 Choose Filter > Objects > Cleanup.

2 Select the Delete Unpainted Objects option.

(You can also select the Delete Stray

Points option to delete any stray, isolated anchor points, and select the

Delete Empty Text Paths to delete any empty text paths.)

3 Click OK.

323

Setting stroke attributes with the

Paint Style palette

Use the Paint Style palette to select all stroke attributes, including the thickness (line weight) of the stroke, how the stroke is capped and joined, and whether a stroke is solid or dashed.

To set stroke attributes using the

Paint Style palette:

1 In the Paint Style palette, select the

Stroke box; then choose the color you want for the stroke.

2 To specify a line weight, enter the desired line weight in the Stroke Weight text box. You can enter a value in inches

(“in”) or millimeters (“mm”), and Illustrator will convert it to an equal value in points.

The line weight determines the thickness of the stroke, in points. Illustrator strokes a path by centering the stroke on the path; half of the stroke appears on one side of the path, and the other half of the stroke appears on the other side of the path.

324

If you enter a weight of 0, the program displays and prints a 1-pixel-wide hairline. (A pixel can range from 1/72 inch to less than 1/3000 inch, depending on the resolution of the output device.)

Hairlines thinner than 0.25 point may not reproduce in final printing, depending on the printer’s resolution.

3 Choose the full palette option (the first option) from the Palette pop-up menu in the upper right corner of the palette. The line attribute panel appears at the bottom of the palette.

4 Choose a Caps option .

5 Choose a Joins option

6 Choose a solid or dashed line option .

See also

Creating wavy and zigzag lines

Adding arrowheads

325

To select a Caps option for a line:

1 In the Paint Style palette with the

Stroke box selected and a Stroke Weight entered, choose from these options:

• Select the Butt Caps option for stroked lines with squared ends.

• Select the Round Caps option for stroked lines with semicircular ends.

• Select the Projecting Caps option for stroked lines with squared ends that extend half the line width beyond the end of the line. This option makes the weight of the line extend equally in all directions around the line.

If you selected the Auto option, the paint attributes are automatically applied.

2 If the Auto option is not selected in the Paint Style palette, click Apply or press Return to paint the selected object.

326

To select a Joins option for a line:

1 In the Paint Style palette with the

Stroke box selected and a Stroke Weight entered, choose from these options:

• Select the Miter Joins option for stroked paths with pointed corners; then enter a Miter Limit between 1 and

500. The miter limit controls when the program switches to a mitered

(pointed) join to a beveled (squared-off) join. The default miter limit is 4 switches a miter join to a bevel join when the length of the point is four times the line weight. A miter limit of 1 applies a bevel join.

• Select the Rounded Joins option for stroked paths with rounded corners.

327

• Select the Bevel Joins option for stroked paths with squared corners.

Caps Joins

2 If the Auto option is not selected in the Paint Style palette, click Apply or press Return.

328

To select a solid or dashed line:

1 In the Paint Style palette with the

Stroke box selected and a Stroke Weight entered, choose from these options:

• Select the Solid option to create a solid line.

• Select the Dashed option to create a dashed line; then specify a dash sequence by entering the lengths of dashes and the gaps between them in the Dash Pattern text boxes. As with the line weight, you can enter a value in inches (“in”) or millimeters (“mm”), and

Illustrator will convert it to an equal value in points.

If you selected the Auto option, the paint attributes are automatically applied.

2 If the Auto option is not selected in the Paint Style palette, click Apply or press Return to paint the selected object.

329

The numbers entered are repeated in sequence. So once you have set the pattern, it’s unnecessary to fill in all the text boxes. Dash patterns are specified in points.

Effects of line cap styles on dashed lines

330

Creating wavy and zigzag lines

The Zigzag filter adds anchor points to an existing path or line, and then moves some of the points to the left of (or upward from) the path, and some to the right of (or downward from) the path.

You can specify the number of anchor points to make and the distance to move them. You can also choose whether to create smooth anchor points, for a wavy line effect, or corner anchor points, for a jagged line effect.

Original

Corner points

Smooth points

Zigzag and wavy lines

331

To convert straight lines to zigzags:

Select the line you want to convert.

Choose Filter > Distort > Zigzag.

3 Enter the distance you want to move points on the line in the Amount text box, or drag the slider.

4 Enter the number of ridges per unit of measure you want in the Ridges text box, or drag the slider.

5 Choose any of the following options:

• To create smooth points, resulting in a wavy line, select the Smooth option.

• To create corner points, resulting in a jagged line, select the Corner option.

• To preview the line, select the Preview option.

6 Click OK.

332

Adding arrowheads

The Add Arrowheads filter lets you add an arrowhead or tail to any selected line.

The resulting arrows can be edited like any other object.

Arrowheads and arrowtails

Modified arrows

To add arrowheads to a line:

1 Select a line.

2 Choose Filter > Stylize > Add

Arrowheads.

3 Choose from various arrowhead designs by clicking the forward or backward icons below the arrow box.

333

4 To rescale the size of an arrowhead, enter the percentage you want in the

Scale text box.

5 Choose the Start or End option to place the arrowhead at the beginning or the end of the line; choose the Start and

End option to place the arrowhead at both ends of the line. The start and end of the line refer to the order in which the line was drawn.

6 Click OK.

334

Copying and applying paint attributes with the eyedropper and paint bucket tools

You can use the eyedropper tool to copy paint attributes from any object in an

Illustrator document and then use the paint bucket tool to apply the attributes to another object.

See

• To copy paint attributes using the eyedropper tool:

• To apply paint attributes using the paint bucket tool:

• To change the paint attributes affected by the paint bucket or eyedropper tool:

335

To copy paint attributes using the eyedropper tool:

1 Select the eyedropper tool .

2 Choose any of the following options:

• Click an object to sample its attributes.

The object can be unselected, locked, or in an inactive document.

• Drag the pointer from within an Illustrator document to the object whose attributes you want to sample. The object can be anywhere on your desktop, such as in another application.

3 Double-click the object to apply the paint attributes to all selected objects.

The object can be unselected, locked, or in an inactive artwork document.

In Artwork view, or if the object is stroked and not painted, click the object’s outline (or the baseline, if type).

Clicking an object with the eyedropper tool updates the Paint Style palette and paints all new objects with the copied attributes until you change the Paint

Style palette or click another object with the eyedropper tool.

336

To apply paint attributes using the paint bucket tool:

1 Select the paint bucket tool .

2 Click any object to select the object and paint it with the attributes currently in the Paint Style palette.

Note: To toggle between the eyedropper tool and the paint bucket tool, hold down the Option key while either tool is currently selected.

If you are working in Artwork view, or if the object is stroked and not painted, be sure to click the object’s outline.

337

To change the paint attributes affected by the paint bucket or eyedropper tool:

1 Double-click the paint bucket or eyedropper tool . The Paint Bucket/

Eyedropper Options palette appears.

2 Select the attributes you want to copy with the eyedropper and apply with the paint bucket. For a description of the attributes, see Setting paint attributes .

3 Click OK.

338

Creating Custom Colors,

Gradients, and Patterns

About custom colors, gradients, and patterns

Creating custom colors

Creating and working with gradient fills

Creating and working with patterns

Importing styles from other documents

Creating a custom startup file

339

About custom colors, gradients, and patterns

Any custom colors, gradients, and patterns you create are saved with the document. You can load them from one document into another by using the Import

Styles command or by creating a custom startup file that loads the custom colors, gradients, and patterns you want when you open the program.

The procedure for creating a custom color, gradient fill, and pattern is similar.

First you create or select your color, gradient, or pattern, and then you define it as such by naming it using the corresponding dialog box. For information on filling objects with custom colors, gradients, and patterns, see Setting paint attributes .

See

• Creating custom colors

• Creating and working with gradient fills

• Creating and working with patterns

340

Creating custom colors

You can define and name your own custom colors using white, black, or percentages of CMYK. Creating your own custom colors lets you select process colors in the Paint Style palette by name, import process colors from one document to another, and make global color changes to artwork. When you color separate the artwork, each custom color is printed out on a separate piece of film or converted to its process color equivalent, as described in Spot color output .

See

• Modifying custom colors

• Deleting custom colors

To create a custom color:

1 Choose Object > Custom Color, double-click any of the custom colors listed in the Paint Style palette, or drag a color swatch onto the custom color selection icon.

2 In the Custom Color dialog box, click

New. The name New Color, followed by a number, appears in the list.

341

3 Enter a name for the color in the

Change Name To text box.

It’s a good idea to name each custom color distinctively so that the new custom color doesn’t replace another custom color with the same name in an open file.

4 Select the White or Black option and choose a tint of gray, or select a process color using one of the procedures described in Creating a process color .

5 Click OK.

The custom color you have created appears in the Paint Style palette, listed alphabetically with the other custom colors. To use the custom color in your artwork, see Setting paint attributes .

Note: When separated, each custom color is converted to a process color by default, unless you deselect the Convert to Process option in the Separation

Setup dialog box. See Separating custom colors as process colors for more information.

342

Modifying custom colors

You can use the Paint Style palette to modify the tint of a custom color, whereas you use the Custom Color dialog box to modify all other attributes of a custom color . When you modify a custom color, the new color replaces all objects painted with the custom color’s former definition.

Custom color Modified custom color

343

To modify the tint of a custom color:

1 Choose the custom color you want to change using the Paint Style palette .

2 Drag the Tint adjustment slider or enter a tint value in the tint percentage text box. The lower the number, the lighter the tint will be.

344

To modify a custom color using the

Custom Color dialog box:

1 Choose Object

Custom Color, or double-click any of the custom colors listed in the Paint Style palette. The

Custom Color dialog box appears.

2 Select the color you want to change.

3 Change the color to black, white, or a process color using the dialog box controls.

4 When you are satisfied with the new color, click OK.

5 Save the file to save the new color definition.

345

Deleting custom colors

Deleting unused colors from the Custom Color list reduces the size of your file and lets you more easily access the custom colors you keep. This procedure deletes the specified colors from all open documents. (It does not delete colors from your startup file.) The default custom colors will reappear the next time you open the documents.

To delete a custom color:

1 Close any documents from which you do not want to delete custom colors.

2 Choose Object > Custom Color, or double-click a custom color name in the

Paint Style palette.

3 Choose one of these methods:

• To delete one color, select the color, and click Delete. Any objects painted with the deleted color are filled with black.

• To delete all custom colors not used in any open document, click Select All

Unused, and then click Delete.

346

Creating and working with gradient fills

A gradient fill is a graduated blend between two or more colors or tints of the same color. You use the Gradient dialog box to create your own gradients and to modify existing gradients. You can also add intermediate colors to a gradient to create a fill defined by multiple blends between colors.

You can create a linear or radial gradient. With a radial gradient, the starting point of the gradient defines the center point of the fill, which radiates outward to the ending point.

See

• To create a gradient

• Modifying gradients

• Adjusting gradients with the gradient tool

• Deleting gradients

• Printing gradients and color blends

347

To create a gradient:

1 Choose Object

Window

Gradient, choose

Show Gradient, or doubleclick a gradient name in the Paint Style palette to display the Gradient palette.

2 Choose one of two options:

• To create a new gradient, click New.

The name New Gradient, followed by a number, appears in the list. By default, a new gradient is a linear blend from white to black, and the midpoint of the blend—the point at which each color is

50%—is halfway between the two colors.

• To base your new gradient on an existing fill, select the existing gradient from the palette list, and click Duplicate.

3 To change the name of the gradient, type the name in the text box beneath the list, and press Return.

Name the gradient distinctly to avoid overwriting another gradient with the same name in an open file.

4 To set the gradient’s starting color, click the left triangle below the gradient bar.

348

5 Specify a percentage of white or black, a process color, or a custom color, by clicking the appropriate color option box and using the procedures in Setting paint attributes .

Note: If you create a gradient between custom colors, be sure to deselect the

Convert to Process option in the Separation Setup dialog box to print the gradient as individual separations.

Gradients between a custom color and a process color print as process colors.

For more information, see Printing gradients as separations .

6 To define the gradient’s ending color, select the right triangle below the gradient bar by clicking it; choose a color.

Starting color

Midpoint

Ending color

349

7 Click the Linear or Radial option.

Linear and radial gradients

8 To display the full palette or only the top panel, click the palette display control below the gradient bar at the top right of the palette.

Click to collapse and expand palette

9 To adjust the gradient’s starting or ending point, drag the triangles below the bar.

350

To adjust the midpoint of the fill (the point at which the colors are at 50%), drag the diamond located above the bar.

25% 50% 75%

Gradient fills with midpoint at different percentages

351

Modifying gradients

You can modify gradients by transposing the beginning and ending colors, or you can add colors to blend between multiple colors. It’s a good idea to fill an object with the gradient you plan to adjust. This lets you see the effect on the artwork as you adjust the gradient.

352

To add intermediate colors to a gradient:

Click anywhere below the gradient bar to define another triangle. Select a color and adjust the triangle as you would any other starting or ending color .

Click below bar to define new color

To delete an intermediate color, drag the triangle off the gradient bar.

Linear and radial multicolor gradients

353

To transpose colors in a gradient:

Drag the starting color triangle below the gradient bar to the ending color triangle, or vice versa. You can use this procedure with any two starting and ending points in a gradient.

Transposing colors

354

Adjusting gradients with the gradient tool

Once you have filled an object with a gradient, the gradient tool lets you modify the gradient by “repainting” the fill along an imaginary line you drag. This tool lets you change the direction of a gradient, change the starting and ending points of a gradient, and apply a gradient across multiple objects.

To use the gradient tool:

1 Select an object whose gradient you want to modify.

2 Select the gradient tool .

3 Position the pointer where you want to define the starting point of the gradient, and drag across the object in the direction you want the gradient to be painted. Hold down the Shift key to constrain the tool to multiples of

45 degrees.

355

4 Release the mouse button to set the gradient’s ending point.

Drag to set gradient’s Result direction and length.

To apply a gradient across multiple objects:

1 Select the objects you want to fill with a gradient.

2 Fill each object with the gradient using the Paint Style palette or the paint bucket tool .

3 Select the objects if they are not already selected.

4 Select the gradient tool .

356

5 Position the pointer where you want to define the starting point of the gradient, and drag across the object in the direction you want the gradient to be painted.

6 Release the mouse button where you want to set the gradient’s ending point.

Default gradient fill

Gradient applied across objects

357

Deleting gradients

This procedure deletes the specified gradients from any open Illustrator documents. Make sure you close any documents that you don’t want affected. (If any object is currently painted with that gradient, a message appears.) Any objects painted with a deleted gradient are filled with black.

This procedure does not delete gradients from your startup file.

To delete a gradient:

In the Gradient palette, select the gradients that you want to delete, and click Delete.

358

Creating and working with patterns

To create a pattern, you select and define artwork as a pattern using the

Pattern dialog box, similar to defining a custom color or gradient. You can use any artwork for a pattern (with the exception of masks or gradients), or you can design a pattern from scratch with any of the tools in the Adobe Illustrator program. You can customize any pattern by resizing the pattern, or by coloring the pattern’s objects.

The Adobe Illustrator Deluxe CD-ROM includes libraries of patterns. The

Adobe Illustrator Startup file and program disks contain a smaller collection of these patterns. You can also add patterns to your startup file .

The Adobe Illustrator program builds a pattern from a pattern tile, which consists of the pattern objects (or artwork) surrounded by an unpainted rectangle, called a bounding rectangle or box, backmost in your artwork.

359

Patterns intended for filling objects (fill

patterns) differ in their design and tiling from patterns designed to outline paths

(path patterns). For best results, use fill patterns to fill objects and path patterns to outline objects.

See

• How patterns tile

• Guidelines for constructing patterns

• Constructing simple patterns and defining patterns

• Constructing patterns with irregular textures

• Constructing geometric patterns

• Creating corner tiles for path patterns

• Moving patterns

• Transforming pattern-filled objects

• Deleting patterns

360

How patterns tile

Patterns tile from left to right from the ruler origin, by default the bottom of the artwork, to the top of the artwork. Only one tile makes up a fill pattern, whereas up to three tiles can comprise a path pattern—for the sides, outer corners, and inner corners. Corner tiles enable path patterns to flow smoothly.

Fill patterns tile perpendicular to the x axis. In contrast, path patterns tile perpendicular to the path (the top of the pattern tile always faces outward). Also, corner tiles rotate 90 degrees clockwise each time the path changes direction.

Fill and path patterns also tile differently in relation to the bounding box—an unfilled, unstroked rectangle backmost in the artwork. For fill patterns, the bounding box acts as a mask; fill patterns tile only the artwork within the pattern’s bounding box. In contrast, path patterns tile artwork within the bounding box and protruding from, or grouped with it. Thus, applying a path pattern as a fill may add undesired artwork to the fill.

361

Guidelines for constructing patterns

Follow these general guidelines when constructing pattern tiles:

• As you create your pattern tile, enlarge the artwork to align elements more accurately, and then reduce the artwork for the final selection.

• For greatest efficiency in previewing and printing, a fill pattern tile should be about 1/2” to 1” square. Side tiles for path patterns should be no larger than

1/2” to 1” high by 1” to 2” wide; the corner tiles must be the same height as the side tiles, and should be square.

• The more complex the pattern, the smaller the selection used to create it should be; however, the smaller the selection (and the pattern tile it creates), the more copies will be needed to create the pattern. Thus, a 1” square tile is more efficient than a 1/4” square tile. If you are creating a simple pattern, you may want to include multiple copies of the object within the selection intended for the pattern tile.

362

• To make the pattern easier to print, delete any unnecessary detail from the artwork. If possible, group objects with the same paint attributes so that they are adjacent in the stacking order.

• To create simple line patterns, layer stroked lines of varying widths and colors, and place a bounding box behind the lines to create a pattern tile.

Corner tile Side tile

• To ensure smooth tiling, close paths before defining the pattern.

• Enlarge your artwork view and check for flaws before defining a pattern.

• If you draw a bounding box around the artwork, make sure that the box is backmost in the tile, and that it is a rectangle. To have Illustrator use this bounding box for a path pattern, you must fill and stroke it with None.

363

• When painting a tile, apply named custom colors to make it easier to change colors later. See Creating custom colors for more information.

• To make an organic or textural pattern appear irregular, vary the tile artwork subtly, not dramatically, for a more realistic effect. You can use the

Roughen filter in the Distort menu to control variations.

Original Roughen filter applied

Follow these additional guidelines when creating path patterns :

• When possible, confine artwork to an unpainted bounding box to organize your artwork more efficiently and control how the pattern tiles. See How patterns tile for more information.

364

• Corner tiles must have the same height as side tiles to align properly on the path. If you plan to use corner tiles with your path pattern, align objects in the corner tile horizontally with objects in the side tiles, so that the patterns tile correctly.

Side tile Incorrect corner tile

Correct corner tile

• Create special corner effects for path patterns using corner tiles. See Creating corner tiles for path patterns .

365

Constructing simple patterns and defining patterns

To create a pattern, you define artwork as a pattern tile using the Pattern dialog box. The procedure is similar to defining a custom color or a gradient.

To create and define a pattern:

1 Create artwork for the pattern (see

Guidelines for constructing patterns ).

You cannot use a mask or gradients

(unless converted to objects) as a pattern.

2 To make the pattern easier to print, remove any unnecessary detail from the pattern artwork, and group objects that are painted with the same color so that they are adjacent in the stacking order.

3 Optionally, to organize your artwork more efficiently, draw a rectangle around the artwork you want to use as a pattern, fill and stroke it with None.

Choose Arrange > Send to Back to make the rectangle the backmost object in your artwork.

366

4 With the selection tool , select the artwork that will make up the pattern tile.

5 Choose Object

Pattern.

6 Click New. A preview of the pattern tile appears in the upper right corner of the dialog box.

7 Name the pattern using up to 31 characters.

(For ease of use on IBM PC-compatible platforms, name the pattern using the

DOS 8.3 naming convention of eight characters for the name followed by a period and up to three characters for the file format; e.g., Geometrc.ai.)

8 Click OK.

Paint an object with your newly created pattern as described in Setting paint attributes .

367

Constructing geometric patterns

Where you draw the bounding box determines how a geometric pattern tiles. See How patterns tile for more information.

To construct a geometric pattern:

1 If necessary, construct a geometric object, paint it, and display its center point using the Object > Attributes dialog box. (For example, the diamond shape in the following illustrations was created by using the polygon tool .)

2 Make sure the Snap to Point option is on in the File > General Preferences dialog box.

3 Select the geometric object.

4 For precise positioning, use the selection tool positioned on one of the object’s points.

5 Begin dragging to copy the object vertically from one of its anchor points; then hold down the Option and Shift keys to copy the object and constrain its movement.

368

6 When the copy of the object has snapped into place, release the mouse button and then release the Option and

Shift keys.

7 Shift-click to select both objects, and begin dragging the objects to the right by one of their anchor points; then hold down the Option and Shift keys to create a copy and constrain the move.

8 When the copy of the object has snapped into place, release the mouse button and then release the Option and

Shift keys.

9 Repeat steps 3 through 7 until you’ve built the pattern you want.

369

10 Using the rectangle tool , follow one of two methods:

• For a fill pattern, draw a bounding box from the center point of the upper left object to the center point of the lower right object.

• For a path pattern, draw a bounding box from the center point of the artwork, holding down the Option key and the

Shift key as you drag to draw from the center outward and to constrain the box to a square. The bounding box should surround and coincide with the outer boundaries of the objects.

Bounding box for a fill pattern

Bounding box for a path pattern

370

11 Paint the rectangle and the geometric objects the desired color.

12 If you painted the rectangle, copy it, fill and stroke it with None, and choose

Arrange > Send to back to make it the bounding box and backmost in your artwork.

13 Define the geometric objects as a pattern, following the procedure in Constructing simple patterns and defining patterns .

371

Constructing patterns with irregular textures

You can create an irregularly textured fill pattern that will tile seamlessly using this procedure. Fill patterns clip any artwork outside the bounding box; path patterns do not. To create an irregularly textured path pattern, select and define as a pattern only the texture within the bounding box. See How patterns tile for more information.

To create an irregular texture:

1 Draw a bounding box (rectangle).

If you are creating a path pattern, go to step 13.

2 Draw the texture with the objects or lines that intersect only the left side of the bounding box.

Shortcut: If you know the rectangle’s exact dimensions, eliminate steps 3 through 7 by selecting only the lines and using the Move command to specify a horizontal move the width of the rectangle. Be sure to click Copy instead of

OK in the Move dialog box.

372

3 Select the lines and the box.

4 With the pointer on the lower left corner of the box, drag it to the right; then hold down the Option and Shift keys to make a copy and to constrain the move.

Draw texture on left side of rectangle . . .

and then copy texture and rectangle.

5 When the upper left corner point of the copy snaps to the upper right corner point of the box, release the mouse button, and then the Option and Shift keys.

6 Deselect the box.

373

7 Select the right box; delete it.

Then select right rectangle and delete it . . .

to create identical texture on the right and left.

8 Use the freehand tool to draw a texture with objects or lines intersecting only the box’s top side. Select all lines crossing the top and the bounding box.

374

9 With the pointer on the upper right corner of the box, drag it down; then hold down the Option and Shift key.

Draw texture at top of rectangle; then copy texture and rectangle.

10 When the upper left corner point of the copy snaps to the box’s lower left corner point, release the mouse button and the Option and Shift keys.

11 Deselect everything.

375

12 Select the lower box and any objects that don’t cross the top box; delete them.

Select lower box; delete it . . .

to create identical texture on bottom.

13 Use the freehand tool to fill the box with a texture, without intersecting the box’s edges. Paint the texture.

14 Define the artwork and bounding box as a pattern. See Constructing simple patterns and defining patterns .

376

Creating corner tiles for path patterns

Corner tiles lend special border effects when applying path patterns. You can create corner tiles from scratch, or you can use a path pattern’s side tile as the basis for designing complementary outer and inner (reflected –135 °) corner tiles.

To create symmetrical corner tiles from a side tile:

1 Open a path pattern file, supplied with Adobe Illustrator on the Deluxe

CD-ROM, that you want to use.

2 Choose Object > Pattern. Select the tile you want to use. Click Paste to paste a copy of the tile in the center of your artwork. Click OK.

3 If the tile does not have a square bounding box, create a box that completely encompasses the artwork, the same height as the side tile. (Side tiles can be rectangular.) Fill and stroke the box with None. Choose Arrange > Send to Back to make the box backmost in your artwork. (The bounding box helps you align the new tile.)

377

4 Select the tile and the bounding box.

5 Use the rotate tool to rotate the tile and its bounding box 180 degrees.

Pasted tile Tile rotated 180

6 Using the rotate tool, Option-click the lower left corner of the bounding box.

Enter a value of 90

and click Copy to create a copy flush left of the first tile.

This will become the corner tile.

7 Use the selection tool to select the top right anchor point. Drag the tile down by the point; hold down the

Option key and the Shift key to make a third copy and constrain the move.

378

8 When the copy’s upper right anchor point snaps to the corner tile’s lower right anchor point, release the mouse button and the Option and Shift keys.

This third copy is for alignment.

Rotate 90

and copy right tile.

Option-drag corner tile to make third copy.

379

9 Select the artwork in the right tile.

Drag it to the left, holding down the

Option key and the Shift key so that the artwork overlaps that in the corner tile.

Copy, move right tile over corner.

Result

10 Edit the corner tile to line up its artwork vertically and horizontally with the tiles next to it. Paint the tile.

Unneeded elements Final outer corner tile selected, deleted

380

11 Select all of the tile including the bounding box.

12 Choosing Object > Pattern. Click

New, name the tile as a variation of the original (for example, use the suffix

.outer). Click OK.

To create an inner corner tile:

1 Select the outer corner tile, including its bounding box, or choose Object >

Pattern and paste the pattern tile into your artwork.

2 Using the reflect tool , reflect the tile

–135 ° , and copy it. The adjustment matches how Adobe Illustrator reflects corner tiles as it applies them to inner corners.

3 Select the tile and its bounding box, and define them as a pattern by choosing Object > Pattern. Click New, name the tile as a variation of the original (for example, with the suffix .inner), and click OK.

Use the corner tiles you have created with the path pattern’s side tile. To apply the pattern to a path, see Outlining paths with patterns .

381

Modifying patterns

You can edit an existing pattern to create a new one. You can also edit a pattern and save it under its original name. Any new and existing objects painted with that pattern are painted with the new definition rather than with the old definition.

To modify an existing pattern:

1 Make sure that nothing is selected in your artwork.

2 Choose Object

Pattern.

3 In the scrolling list, select the pattern that you want to modify, and click Paste.

The pattern tile is pasted into your document as ungrouped artwork.

4 Click OK.

5 Use the selection tool to select artwork in the pattern tile, and edit the tile.

6 Select the pattern tile.

382

7 To preserve different patterns with the same name in open documents, close any documents that you do not want affected.

8 Choose Object > Pattern.

9 Choose one of two options:

• To save the new pattern with the same name, select the name of the existing pattern and click OK. The pattern is updated in all open documents in which the pattern appears.

• Click New, enter a name for the pattern, and click OK. (For ease of use on IBM PC-compatible platforms, name the pattern using the DOS 8.3 naming convention of eight characters for the name followed by a period and up to three characters for the file format; for example, Zigzag.ai.)

383

Moving patterns

Patterns begin tiling from the ruler origin and keep tiling in a left-to-right sequence, from bottom to top, until the selection is filled. See How patterns tile for more information.

You can adjust where all patterns in your artwork begin tiling by changing a document’s ruler origin.

To move all of the patterns within a file:

1 Choose View

Show Rulers.

2 With the selection pointer on the box in the lower right corner where the rulers intersect, begin dragging into the window. When the ruler origin (the two intersecting lines) are positioned as desired, release the mouse button. For help with this step, see Changing the ruler origin .

All new patterns within the file will begin tiling from the new ruler origin.

If you have moved pattern tiles within objects, the pattern tiles are now moved from the new ruler origin.

384

Transforming pattern-filled objects

If an object that you want to transform is filled with a pattern, you can choose to transform only the pattern, transform only the object, or transform the pattern and object simultaneously.

Once you have transformed a fill pattern, all patterns that you subsequently apply will be transformed the same way.

To return fill patterns to their original states, select another paint style, and then reselect the desired pattern.

You can transform fill patterns using the dialog box associated with a transformation tool or through the General Preferences dialog box. Regardless of the method you choose, turning this option on or off in any dialog box updates the option in all dialog boxes. For more information on setting this option, see

Choosing preferences that affect how objects move .

385

To transform a pattern and object using a transformation tool:

1 Use the selection tool to select the pattern-filled object.

2 Double-click the transformation tool you want to use.

3 Choose one or both of the following options:

• Select the Pattern Tiles option to transform the pattern tiles.

• Select the Objects option to transform the object.

4 Enter the desired transformation values in the text boxes.

5 Click OK.

To select the Transform Pattern Tiles preferences option:

1 Choose File

Preferences

General.

2 Select the Transform Pattern Tiles option to select the Pattern Tiles option automatically in the transformation dialog boxes.

3 Click OK.

386

Deleting patterns

You should eliminate unused patterns in your file. Any objects painted with a deleted pattern are filled with black.

To delete one or all unused patterns:

1 Choose Object

Pattern.

2 Choose one of the following options:

• Select the pattern you want to delete.

• Click Select All Unused to select all of the patterns that are currently unused.

3 Click Delete to delete the unused patterns. If you want to save any of the patterns, hold down the Shift key and click to deselect the patterns you do not want to delete.

4 Click OK.

387

Previewing and printing patterns

The Preview and Print Patterns option in the Document Setup dialog box lets you choose whether to preview and print patterns in your artwork. By default, this option is turned on. Because patterns can significantly slow previewing and printing, you may want to turn off the

Preview and Print Patterns option. You can turn the option back on at any time to preview and print the patterns in your artwork.

See also Additional tips for efficient printing .

To turn off the previewing and printing of patterns:

1 Choose File > Document Setup.

2 Deselect the Preview and Print

Patterns option, and click OK.

388

Importing styles from other documents

You can import the style characteristics—including custom colors, patterns, gradients, and graph designs—from an

Illustrator document into your current document by using the Import Styles command.

When you import styles into your document, the new custom colors, patterns, gradients, and graph designs are added to your document’s scrolling lists.

Note: When importing new styles into a document, keep in mind that any new style with the same name as an existing style overwrites the existing version.

To import a file’s styles into another file:

1 Choose File

Import Styles.

2 Select the Illustrator document from which you want to import styles, and click Import. The new styles are added to your current document’s existing list of styles.

389

Creating a custom startup file

You can create a custom startup file that defines the contents of the default Paint

Style palette. In this way, you can have easy access to the patterns, gradients, graph designs, and custom colors that you use most frequently. By adding these elements to the startup file, you make them available in every new

Adobe Illustrator document you create.

In addition, any new documents you create have the same Document Setup and Page Setup settings as those found in the startup file, and they use the same zoom level, window size, viewing preferences, and scroll position as that of the startup file when it was last closed.

Note: Large startup files can affect how quickly the Adobe Illustrator program starts. If starting the program seems to take too long, you can reduce the size of your startup file by eliminating unnecessary elements.

390

To create a custom startup file:

1 Make a backup copy of the current default startup file, Adobe Illustrator

Startup, and then save the backup file in a different location. This action saves the original startup file in case you need it again. The startup file is located in the

Plug-ins folder in the main Illustrator folder.

2 Open the default startup file to use as a template for the custom startup file.

This document contains labeled squares filled with the default process colors, custom colors, patterns, and gradients available in the Paint Style palette.

3 Delete any existing process colors you want to remove. Delete them from both the Paint Style palette and the artwork in the startup file.

4 Delete any existing custom colors, patterns, and gradients you want to remove. Delete them from their respective palettes and the artwork in the startup file.

391

5 Create any new custom colors, patterns, and gradients you want, or import them using the Import Styles command .

6 Drag the custom colors, gradients, or patterns to their appropriate swatches.

7 Add the new paint style attributes to the artwork in the startup file, so you can see and refer to them later if necessary.

8 Save any graph designs that you want available in your documents.

9 Select the options you want as default settings in the Page Setup and

Document Setup dialog boxes, as well as the view preferences, the ruler origins, and the page origins.

10 Save the new file as Adobe Illustrator

Startup, and place it inside the Plug-ins folder.

392

Using Layers

About layers

Using the Layers palette

Creating layers and setting layer options

Drawing objects on layers

Moving objects between layers

Changing the order of layers

Deleting layers

Locking layers

Hiding and showing layers

Dimming placed EPS images

Choosing a selection color for layers

Displaying layers in Artwork view

Making selected layers nonprintable

393

About layers

The Layers palette lets you create multiple levels of artwork on separate, overlapping layers in the same document.

You can create and modify objects on any layer without affecting artwork on other layers. You can display, print, lock, and reorder layers as distinct units. See

Using the Layers palette and Creating layers and setting layer options .

Three rules affect objects and their order on layers:

• Within each layer, objects are stacked according to their painting order. See stacking objects for more information.

• Grouped objects are on the same layer; if you group objects on different layers, all objects are placed on the frontmost layer of the group, directly behind the frontmost object in the group.

• When masking objects on different layers, objects on intermediate layers become part of the mask. See Creating masks .

394

Using the Layers palette

Use the Layers palette to create layers and set their options, and to set how layers are displayed and printed. All new artwork is placed on the layer selected in the Layers palette.

See also

• Creating layers and setting layer options

• Hiding and showing layers

• Deleting layers

To display the Layers palette:

Choose Window > Show Layers.

Show/Hide

Lock/Unlock

Locked layer

Palette menu

Current selection in artwork

395

The Layers palette lists the layers in a document, starting with the frontmost layer. A colored dot to the right of a layer name in the palette indicates that a selected object is on that layer.

jump to art

396

The Layers palette t h e

A Discussion on Euclid’s Geometry

William Baeck

The Layers Palette the

ELEMENTS

A Discussion on Euclid’s Geometry

Text

William Baeck

Line Art

Background return to text

Creating layers and setting layer options

Every new Adobe Illustrator document contains one layer, named by default

“Layer 1.” You can create any number of layers in your document; the number of layers a document can have is limited only by your computer’s memory.

Once a layer is created, you can then set options for any layer, such as whether the layer will display or print, and whether to lock all objects on that layer.

To create a new layer and set options for a layer:

1 Choose New Layer from the Layers palette menu.

2 Choose any of the following options:

• Type a name for the layer in the Name text box. By default, layers are named according to the order in which they were created, with Layer 1 being the backmost layer.

398

• Select a color from the Selection Color pop-up menu to indicate selected objects in that layer .

• Select or deselect the Show option to display or hide the .

layer

• Select or deselect the Print option to make the layer printable or nonprintable .

• Select or deselect the Preview option to display the layer in Preview or

Artwork view. For more information, see

Displaying layers in Artwork view .

• Select or deselect the Dim Placed

Images option to dim placed EPS images or show them at their normal intensity.

• Select or deselect the Lock option to lock or unlock objects on the layer. For more information, see Locking layers .

3 Click OK.

399

Drawing objects on layers

Any new object created in a document is placed on the layer selected in the

Layers palette.

To select a layer on which to work:

Click the name of the layer you want on the Layers palette.

400

Moving objects between layers

You can move objects from one layer to another by cutting objects from one

Layer and pasting them into another, or by using the Layers palette; you can also reorder the layers in your artwork.

The Paste commands can be used to move objects between layers. With the

Paste commands, if objects are cut or copied from different layers, they are pasted together onto the selected layer by default.

With the Paste Remembers Layers option, you can retain the layering order of pasted objects in your artwork, so that the Paste commands do not affect layering, but affect only the stacking order of objects.

To retain the order of pasted objects:

1 Choose File

Preferences

General.

2 Select the Paste Remembers Layers option, and click OK.

401

To move an object to a different layer using the Paste commands:

1 Make sure that the Paste Remember

Layers option in the General Preferences dialog box is deselected.

2 Select the object that you want to move, and choose Edit > Cut.

3 Select any object on the layer to which you want to move the cut object, or select the layer name in the Layers palette.

4 Choose one of the following options:

• Choose Edit > Paste to paste the object into the center of the artwork as the frontmost object on the selected layer.

• Choose Edit > Paste in Front to paste the object into its original position in the artwork, in front of the topmost selected object. If the selected object is in a group, the pasted selection becomes part of the group.

402

• Choose Edit > Paste in Back to paste the object into its original position in the artwork, behind the backmost selected object. If the selected object is in a group, the pasted selection becomes part of the group.

Once the object is pasted, you can move it and use the commands in the Arrange menu to change the stacking order of the object on its new layer.

To move an object to a different layer using the Layers palette:

1 Select the object you want to move. A colored dot appears to the right of that layer in the Layers palette, indicating the current selection.

403

2 Drag the colored dot to the layer to which you want to move the object.

Blue dot on palette moved from Layer 2 to Layer 3

Result

404

Changing the order of layers

By rearranging the layers on the Layers palette, you can change the order of layers in your document.

To change the order of layers:

In the Layers palette, drag the layer you want to move to its new location.

Layer 2 moved to top of Layers palette

405

Result

406

Deleting layers

You can remove a layer from your document by removing it from the

Layers palette. Deleting a layer deletes all objects on that layer from your document.

Tip: Before deleting a layer, hide all the other layers first. This lets you check what’s on the remaining layer.

To delete a layer:

1 Select the layer name in the Layers palette.

2 Choose Delete Layer from the Layers palette pop-up menu.

407

Locking layers

Locking a layer has an effect similar to that of choosing the Lock command from the Arrange menu—locked layers cannot be selected or edited in any way.

To lock or unlock a layer:

Click the dot beneath the pencil icon to the left of the layer name. This turns on the Lock option in the Layer Options dialog box. Click again to turn the option back off and unlock the layer.

408

To lock all layers but those selected in the palette:

1 Select the layer or layers you want to edit.

2 Choose one of two options:

• Choose Lock Others from the Layers palette pop-up menu.

• Click the pencil icon.

the

ELEMENTS

A Discussion on Euclid’s Geometry

Dot under pencil icon indicates art can be edited.

409

The

ELEMENTS

A Discussion on Euclid’s Geometry

No dot under pencil icon indicates art cannot be edited.

To unlock all layers:

Choose Unlock All from the Layers palette pop-up menu.

410

Hiding and showing layers

Hiding a layer has an effect similar to that of choosing Hide from the Arrange menu. Hidden layers cannot be viewed or edited.

To hide or display a layer:

Click the dot beneath the eye icon to the left of the layer name. This turns off the

Show option in the Layer Options dialog box. Click again to turn the option back on and redisplay the layer. the

ELEMENTS

A Discussion on Euclid’s Geometry

Solid dot under eye icon: layer art in

Artwork view.

411

the

ELEMENTS

A Discussion on Euclid’s Geometry

Hollow dot under eye layer art in Preview view.

the

ELEMENTS

A Discussion on Euclid’s Geometry

Empty eye column and pencil with red slash:

Layer is uneditable.

412

To hide all layers but those selected in the palette:

1 Select the layer or layers you want to view.

2 Choose one of two options:

• Choose Hide Others from the Layers palette pop-up menu.

• Click the eye icon.

To display all layers:

Choose Show All from the Layers palette pop-up menu.

413

Dimming placed EPS images

The Dim Placed Images option in the

Layer Options dialog box makes placed

EPS images on a given layer appear dimmed on-screen. This option screens back placed images to make it easier to edit objects on top of the placed image.

You can use this option as a design tool with placed images, for laying out artwork on top of them, or using them as a template you can trace over. For information about tracing over a dimmed placed image, see Tracing over an EPS or

TIFF image .

To dim a placed EPS image:

1 In the Layers palette, choose the layer that contains the placed EPS image you want to dim.

2 Choose Layer Options from the Layers palette pop-up menu, or double-click the layer’s name.

3 Select the Dim Placed Images option; then click OK.

414

Choosing a selection color for layers

Selecting a different color for each layer makes it easy to distinguish layers in your artwork as you work. By default, selecting an object highlights the object with a light blue outline and anchor points. For example, if you are working with three different layers, you can leave the first layer light blue, and set the next two layers to indicate selected objects with different colors.

To specify a selection color for a layer:

1 In the Layers palette, choose the layer for which you want to specify a selection color.

2 Choose Layer Options from the Layers palette pop-up menu, or double-click a layer name.

3 Select the color that you want to use to indicate selections on that layer. The default color is light blue.

4 Click OK.

415

Displaying layers in Artwork view

Displaying a layer in Artwork view displays all artwork on the layer as outlines, and is similar to switching to

Artwork view. See Viewing modes for more information.

To display a layer in Artwork view:

Choose one of two options:

• Option-click the dot beneath the eye icon to the left of the layer name. Optionclick again to turn the option back on and redisplay the layer in Preview view.

• Deselect the Preview option in the

Layer Options dialog box.

To display all but the selected layer in Artwork view:

1 Select the layer or layers to preview.

2 Choose one of two options:

• Choose Artwork Others from the

Layers palette pop-up menu.

• Click the eye icon.

416

Making selected layers nonprintable

You can use the Print option in the Layer

Options dialog box to make a layer temporarily nonprintable. This option is useful for printing only the segments of your artwork that you need to proof.

For example, you could put all type in a document onto a single layer and then print only that layer for proofing.

To make a layer temporarily nonprintable:

1 In the Layers palette, choose the layer you want to make nonprintable.

2 Choose Layer Options from the palette pop-up menu, or double-click a layer name to display the Layer

Options dialog box.

3 Deselect the Print option; then click OK.

417

Using Type

Creating type

Setting type attributes

Using keyboard shortcuts to change type attributes

Painting type

Transforming type

Modifying letterforms as graphic objects

Working with columns of text

Formatting columns and paragraphs

Editing text

418

Creating type

Using the type tools, you can create type anywhere in a document. You can create type by:

• Entering type at a point

• Entering type in a rectangle

• Entering type in an object

• Entering type along a path

• Importing text files

You can also export type to another application.

See also

• Selecting type

• Setting type attributes

• Deleting empty type paths from artwork

• Painting type

• Editing text

419

Entering type at a point

You can use the type tool to enter type anywhere in the Illustrator work area, without first defining a bounding area for the type. Entering type this way, for example, would be a good way to type in a caption for an illustration.

To enter type at a specific point:

1 Select the type tool . The pointer changes to an I-beam within a dotted box.

The small horizontal line near the bottom of the I-beam marks the position of the type baseline. The baseline is the line on which the type rests.

2 Click where you want the type to begin.

Be sure not to click an existing object, because clicking an object converts it into a container or path for the type. If an existing object is located where you want to enter type, hide the object, or enter the type away from the object and reposition the type over the object afterward.

420

3 Enter the type you want. Press Return to begin a new line of type.

The default font is 12-point Helvetica.

To change the font, see Setting type attributes .

421

Selecting type

The type tool’s I-beam pointer lets you select individual characters, words, and paragraphs, and change the type’s attributes . To select all of the type on a path or in a type container, use the selection tool on the path or type container, as described in Selecting objects .

See also Editing text .

To select characters and words:

1 Select any type tool.

2 Choose one of two options:

• Drag to select the type you want to change. (Shift-drag to extend or reduce your selection.)

• Position the pointer in a word, and double-click to select that word.

422

Type overview

Illustrator lets you use type in various ways, including customizing type for use as display type for titles or headlines, manipulating type as graphic objects, flowing type along and within a path, and wrapping type in columns of body text.

Click on any callout to jump to information on that topic.

Type on a path

Type as graphic objects

Area type

Wrapped type

To select blocks of type:

1 Select any type tool.

2 Choose any of the following options:

• Drag to select the type you want to change. (Shift-drag to extend or reduce your selection.)

• Position the I-beam pointer in a paragraph, and triple-click to select the entire paragraph.

424

• Click the type with a type tool, and then choose Edit > Select All to select all the type on the type path or in the type container.

In the heart of the the large island of

Niphon and in a

In the heart of the the large island of

Niphon and in a

Drag Shift-drag to reduce or extend

In the heart of the the large island of

Niphon and in a

In the heart of the the large island of

Niphon and in a

Double-click to select a word

Triple-click to select an entire paragraph

425

Entering type in a rectangle

You can use the type tool to define a text rectangle into which you enter type.

This method is useful when you want to create one or more columns of text , such as for a brochure. You can also create a rectangle with the rectangle tool, and then use the type tool to convert it to a text rectangle.

The text rectangle you create is unpainted (neither filled nor stroked). It is not visible in Preview view and when you print it unless you fill or stroke the text rectangle or you edit type in it.

See also

• Painting type

• Changing the size or shape of a text rectangle

• Linking type containers

426

To create a text rectangle using the type tool:

1 Select the type tool . The pointer changes to an I-beam within a dotted box.

2 Drag diagonally to define the text rectangle.

When you release the mouse button, the pointer reverts to an I-beam. (In Artwork view, a rectangle appears with an in sertion point at the top left corner of the text rectangle.)

3 Enter the type. Notice that the type wraps to fit inside the defined area.

4 Press Return to begin a new paragraph.

427

If you enter more type than can fit within the rectangle, a small box containing a plus sign appears near the bottom of the rectangle when in Artwork view or the text rectangle or type is selected. The plus sign is positioned at the end of the baseline of the last visible line of type.

In the heart of the large island of

Niphon and in a mountainous and wooded region, fifty leagues from

Yokohama, lies hidden the

Type within its container

In the heart of the large island of

Niphon and in a mountainous and wooded region, fifty leagues from

Yokohama, lies hidden the ancient city of the

Type that overflows its container

428

Changing the size or shape of a text rectangle

You use the direct-selection tool to adjust a text rectangle.

To change the size or shape of a text rectangle:

1 Select the direct-selection tool .

2 If the type is selected, click outside the rectangle to deselect it.

3 Position the pointer on the edge of the text rectangle you want to adjust.

Do not select any type baselines.

4 Click to select an edge or corner of the text rectangle, and drag to adjust the rectangle’s shape. Hold down the

Shift key to constrain the tool to multiples of 45 degrees. Constraining makes it easier to retain the text rectangle in the shape of a rectangle.

429

Note: It’s easiest to adjust a text rectangle in Artwork view.

In the heart of the large island of

Niphon and in a mountainous and

In the heart of the large island of

Niphon and in a mountainous and wooded region, fifty leagues from

Yokohama, lies hidden the ancient city of the

Changing shape of text rectangle

430

Entering type in an object

You can use any object as an area within which to enter type. If the object is an open path, the program draws an imaginary line between the endpoints of the path to define the object for the type, just as it does to paint open paths.

When you turn an object into a type path, the path becomes unstroked and unfilled, even if the path was originally stroked or filled. After you enter type, the type is selected, and any changes to the paint settings affect only the type, not the path. You can paint the path after you enter type by selecting the path with the direct-selection tool and using the Paint Style palette.

If you want to create only area type, or if you want to create area type on an open path, you can use the area-type tool exclusively. If, however, you want to create several kinds of type, you should use the type tool. When you move the type tool over different kinds of objects, the type tool appropriate to the specific object (area-type tool or path-type tool) appears.

431

Type tool Area-type Path-type tool tool

Moving type tool over filled objects and paths

To enter type in an object:

1 Select the type tool or the area-type tool (if the object is a filled open path).

2 Position the pointer on the path, and click the mouse button. An insertion point appears.

3 Enter some type.

432

Resting on the descending edge of the

Holy Mountain

Nikko, below the shelter of dense forest, in the midst of

Clicking filled object with areatype tool . . .

changes object into text container and enables you to enter text.

As with text rectangles, if you enter more type than can fit within the area, in

Artwork view, a small box with a plus sign (+) appears near the bottom of the area.

433

Entering type along a path

You can enter type that flows along the edge of an open or a closed path. The path can be regularly or irregularly shaped. When you enter type along a path, the path is no longer stroked or filled. You can paint it later if you want, without affecting the paint attributes of the type. You can have only one string of type (that is, without a carriage return) on a path.

See also

• Painting type

• Moving type along a path

• Flipping the direction of type along a path

Tip: To align type evenly along a path, enter a negative baseline shift value in the Character palette, so that the type runs along the center of the path. This method creates an even flow of type along the curve.

434

To enter type along a path:

1 Select the type tool or the path-type tool .

2 Position the pointer on the path, and click the mouse button. An insertion point appears on the path.

3 Enter the type you want. Type appears along the path.

Set the insertion point.

At th e

D o r o o th f e

P ala ce

Then enter type.

435

Moving type along a path

You use the selection tool to move type along a path.

To move type along a path:

1 Use the selection tool to select the type path if it is not already selected.

2 Position the pointer on the I-beam at the beginning of the line of type.

At th e

D o r o o th f e

P ala ce t

A th e

D o or of

Position pointer on I-beam.

Then drag to move type.

3 Press the mouse button and begin dragging the I-beam in the direction you want to move the type. Be careful not to drag across the path.

4 Release the mouse button when the type is repositioned.

436

Flipping the direction of type along a path

You use the selection tool to flip the direction of type along a path.

To flip the direction of the type along a path:

1 Select the selection tool .

2 Position the pointer on the I-beam.

3 Choose one of the following options:

• Press the mouse button and drag the

I-beam across the path.

• Double-click the I-beam.

At th e

D o r o f o th e

P ala ce

Position pointer on I-beam.

e ac al

P e o o

D e th

Then drag across path to flip type.

437

To move type across a path without changing the direction of the type, use the Baseline Shift option in the Character palette. For example, if you have created type that runs from left to right across the top of a circle, you can enter a negative number in the Baseline Shift text box to drop the type so that it flows inside the top of the circle.

At t he

D o r o e th f o

P a lac e

Type on a path

At t he

D o r o th f o e

P ala ce

Baseline shift

438

Deleting empty type paths from artwork

The Delete Empty Text Paths option in the Cleanup dialog box lets you delete unused type paths and containers from your artwork, thus making your artwork more efficient and easier to print. You can create empty type paths, for example, by inadvertently clicking the type tool in the artwork area, and then choosing another tool.

To delete an empty type path from your artwork:

1 Choose Filter > Objects > Cleanup.

2 Select the Delete Text Paths option, and click OK.

439

Setting type attributes

You can either set type attributes before you enter new type or reset them to change the appearance of existing, selected type. You can set attributes for several type paths and type containers if they are all selected.

See

• Choosing a font family

• Choosing a type size

• Finding and replacing fonts

• Specifying leading

• Specifying kerning and tracking

• Specifying baseline shift

• Adjusting horizontal scale

You change the type attributes using the

Character and Paragraph palettes. Some of the type attributes also have separate submenus or palettes so that you do not have to open the Character or Paragraph palette if you want to change only one attribute.

440

In addition, some attributes can be changed using keyboard shortcuts. See

Using keyboard shortcuts to change type attributes . For a complete list of shortcuts, see the Adobe Illustrator

Quick Reference Card.

You can use various shortcuts to enter values in the Character and Paragraph palettes.

• To apply a value in a text box to the selected type and remain in the same text box in the palette, press the Enter key.

• To apply a value in a text box to the selected type and move to the next text box in the palette, press the Tab key.

To open the Character or Paragraph palette:

Select one of the following options:

• Choose Type > Character.

• Choose Window > Show Character.

• Choose Type > Paragraph.

• Choose Window > Show Paragraph.

441

Choosing a font family

A font family is a complete set of characters, letters, and symbols that comprises a particular typeface design in one style. For example, the font used in this paragraph is Minion. The default font family in the Adobe Illustrator program is Helvetica.

You can choose a font from the Font pop-up menu or from the Character palette.

Note: Special characters, such as the infinity symbol, may display correctly but not print. To print symbols, you may have to select the characters and apply the Symbol font to them.

To choose a font from the Character palette:

1 Select any type container or type path using a selection tool, or set an insertion point or select a block of type using the type tool .

2 Choose Type > Character. The Character palette appears.

442

3 Choose one of two options:

• In the Font text box, type the name of the font family you want to use. As you type, the name of the first font beginning with that letter appears. Continue entering the font name until the correct font name appears.

• Choose a font from the Font pop-up menu.

4 Press the Enter key or Tab key to apply the new font.

To choose a font from the Font menu:

1 Select any type container or type path using a selection tool, or set an insertion point or select a range of text using the type tool .

2 Open the Font menu. A check mark appears next to the selected font. If the selected type contains two or more fonts, no check mark appears.

3 Drag to choose the font family you want. If more than one style of the font is installed, a submenu displays a list of styles available for the font family.

4 Select the style you want. The font you have chosen becomes the active font.

443

Choosing a type size

You can choose the type size in the

Character palette, from the Size submenu in the Type menu, or by using keyboard commands. The default type size is 12 points. Type size is always measured in points. (One point is equal to

1/72 of an inch.) When you change the type size, the Info palette displays the new type size.

To choose a type size in the Character palette:

1 Select any type container or type path using a selection tool, or set an insertion point or select a range of text using the type tool .

2 Choose Type > Character. The Character palette appears, displaying the currently selected type size in the Size text box.

If the selection contains fonts of more than one size, the text box is blank.

444

3 Choose a new type size from the Size pop-up menu. You can also enter a number by typing the size in the Size text box and pressing the Enter key or Tab key. The new size is applied.

To choose a type size from the Type menu:

1 Select any type container or type path using a selection tool, or set an insertion point or select a block of type using the type tool .

2 Choose Type > Size. The Size submenu appears. A check mark appears next to the current type size.

3 Choose one of two options:

• Select a new type size from the Size submenu.

• If the desired type size does not appear in the Size submenu, choose

Other to display the Character palette.

Enter a value in the Size text box, and press the Enter key or Tab key.

445

Finding and replacing fonts

The Find Font command creates a list of all the fonts in your document and lets you search for and replace them (including the font’s type style, color, and kerning) by name. This command also lets you save the list of fonts as a separate file, which can be useful for a service bureau that is printing the file.

To find and replace fonts in your document:

1 Choose Type > Find Font.

2 Choose from the following options:

• Select the Multiple Master, Standard

(Courier, Helvetica, Symbol, and Times),

Type 1, or TrueType™ option to display these fonts. To display multiple master fonts, you must click both Multiple

Master and Type 1 options (because multiple master fonts are Type 1 fonts).

• Select the System List option to make all fonts currently installed on your system (as filtered through the previous options you chose) available as replacements.

446

• Select the Document List option to limit the fonts you can use as replacements to those already in your document.

3 Select a font name from the Find

Fonts in Document list. Illustrator selects the next instance of that font in your document.

4 Choose one of the following options:

• Click Find Next to find the next instance of that font.

• Click Skip to go to the next name in the font list and search for that font.

5 Select the font you want to use as a replacement from the Replace Fonts list, and choose one of the following options:

• Click Change to change just that instance of the selected font.

• Click Change All to change all instances of the selected font.

447

When there are no more instances of a font in your document, that font name is removed from the list of fonts to find.

6 To save a list of all fonts found in the document, click Save, and then enter a filename and location for the font list file.

448

Specifying leading

Leading specifies the amount of vertical space between baselines. Leading is always measured in points. If a line of type contains characters with different leading values, the line’s leading is set to the greater of the two values.

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead— the necropolis of Japanese

Emperors.

Resting on the descending edge of the Holy

Mountain Nikko, below

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead— the

6-point type with default leading

6-point type with

12-point leading

You can adjust leading in the Character palette, from the Leading menu, or directly from the keyboard. The default

Auto-Leading option sets the leading at

120% of the type size. For example,

10-point type would have a leading value of 12 points (120% of 10 points).

449

To change the leading value using the

Character palette:

1 Select any type container or type path using a selection tool, or select a block of type using the type tool .

2 Choose Type > Character.

3 Enter a value in the Leading text box, or choose a value from the pop-up menu.

4 Press the Enter key or Tab key.

To change the leading value from the

Type menu:

1 Select any type container or type path using a selection tool, or select a block of type using the type tool .

2 Choose Type > Leading.

3 Choose one of two options:

• Select a leading value from the

Leading submenu.

• If the desired leading value does not appear in the Leading submenu, choose

Other to display the Character palette.

Enter a value in the Leading text box, and press the Enter key or Tab key.

450

To specify leading before a paragraph:

1 Choose one of two options:

• To apply leading to a single paragraph in text, click the type tool anywhere in the paragraph.

• To apply leading to all paragraphs in a type container, use the selection tool to select the entire type container.

2 Choose Type > Paragraph.

3 Enter a value in the Leading Before

Paragraph text box.

4 Press the Enter key or Tab key.

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from

Yokohama, lies hidden the ancient city of the dead— the necropolis of Japanese

Emperors.

Resting on the descending edge of the Holy

Mountain Nikko, below the shelter of dense forest,

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from

Yokohama, lies hidden the ancient city of the dead— the necropolis of

Japanese Emperors.

Resting on the descending edge of the Holy

Mountain Nikko, below

Leading before Leading before paragraph: 6 points paragraph: 14 points

451

Specifying kerning and tracking

Kerning controls the spacing between two characters. You can control kerning manually; or you can turn on the kerning built into a font by the font designer.

See Spacing characters with auto-kerning for more on using a font’s built-in kerning. Tracking inserts uniform spacing between more than two characters in selected type. Use tracking to adjust the spacing of a word or of an entire block of type.

The Character palette displays either a Kerning option or a Tracking option, depending on the type selected. The

Kerning option appears if an insertion point is between two characters. The

Tracking option appears if several characters, type paths, or type containers are selected.

452

Positive kerning or tracking values move characters apart; negative kerning or tracking values move characters closer together. Kerning and tracking values are measured in units that are

1/1000 of an em space . The width of an em space is relative to the current type size. In a 1-point font, 1 em corresponds to 1 point; in a 10-point font, 1 em corresponds to 10 points. Because kerning units are 1/1000 em, 100 kerning units in a 10-point font are equivalent to

1 point.

Va Va V a

-100/1000 em 0/1000 em 100/1000 em

Kerning values

453

At the door of the

0/1000 em

A t t h e d o o r o f t h e

200/1000 em

Tracking values

To change the kerning or tracking value:

1 Select any type container or type path using a selection tool, or set an insertion point or select a block of type using the type tool .

2 Choose one of the following options:

• Press Option+Left Arrow to move characters closer together, or

Option+Right Arrow to move characters farther apart. The distance moved is equal to the Tracking value set in the

General Preferences dialog box (the default is 20/1000 of an em space).

454

• Press Command+Option+Left Arrow to move characters closer together or

Command+Option+Right Arrow to move characters farther apart by five times the Tracking value set in the

General Preferences dialog box.

• Choose Type > Tracking or Type >

Character, enter a positive or a negative value in the Tracking/Kerning text box, and press the Enter key or Tab key.

To view the kerning value between two characters:

1 Set an insertion point between two characters whose kerning value you want to view, using the type tool .

2 Choose Window > Show Info.

The Info palette displays the total kerning value for the two characters. For example, if the Info palette displays

“109 = 9 + 100/1000 em,” the characters have 9/1000 em kerning and the line has 100/1000 em tracking.

455

Spacing characters with auto-kerning

To use a font’s kerning information to space characters better, you can select the Auto- Kerning option in the General

Preferences dialog box or in the Character palette. Many fonts contain information about the spacing of character pairs; for example, the spacing between an A and a W often is less than the spacing between an A and an F.

Auto-kerning is off by default because using the feature slows the program’s performance. When Auto-Kerning is selected in the General Preferences dialog box, auto-kerning is applied to new type you create in any document. When selected in the Character palette, the

Auto-Kerning option applies auto-kerning to newly created or selected type in the current document. The last chosen option remains in effect for your work session and is saved with the document.

For the best performance, leave Auto-

Kerning off in the Character palette until you have finished creating your type.

Then select the type and apply autokerning to it.

456

See also Specifying kerning and tracking .

To apply auto-kerning to existing type in a file:

1 Choose Edit > Select All.

2 Select the Auto-Kerning option in the

Character palette.

3 Deselect the type; deselect the option.

457

Specifying baseline shift

Baseline shift controls the distance that type appears from its baseline, either raising or lowering the selected type.

The Baseline Shift option lets you create subscripts or superscripts, or move path type above or below a path without changing the direction of the type flow.

For example, using the path-type tool on a circle positions type above the circle. Using the Baseline Shift option then moves the type inside the circle without changing the type’s orientation.

A positive value moves type above the baseline; a negative value moves it below the baseline. Baseline shifts is measured by points unless you change the Type Units option set in the General

Preferences dialog box.

-4 pt

6 pt

Baseline shifts

458

To specify baseline shift:

1 Select a type container or type path using a selection tool, or select a block of type using the type tool .

2 Choose one of the following options:

• Press Option+Shift+Up Arrow to increase the baseline shift or Option+

Shift+Down Arrow to decrease the baseline shift. The move is equal to the Baseline Shift value set in the

General Preferences dialog box

(2 points, by default).

• Choose Type > Character, enter a value in the Baseline Shift text box.

Press the Enter key or Tab key.

459

Adjusting horizontal scale

Horizontal scale specifies the proportion between the height and width of the type. Unscaled characters have a value of 100%. You can adjust the horizontal scale to compress or expand selected characters. These adjustments have no effect on the characters’ height.

If you have scaled characters nonuniformly using a transformation tool, the characters’ horizontal scale value reflects the change; you can return them to their original proportions by setting the horizontal scale to 100%.

Note: Uniformly scaling type does not affect its horizontal scale, but it does change the type size, leading, indentation, and baseline shift. Nonuniform scaling and skewing affect horizontal scale as well as the type size, leading, indentation, and baseline shift.

460

50%

DOOR OF THE PALACE

100%

DOOR OF THE PALACE

200%

DOOR OF T

Horizontal scale values

To adjust the horizontal scale of type:

1 Select any type container or type path using a selection tool, or select a range of text using the type tool .

2 Choose Type > Character.

3 Enter a percentage in the Horizontal

Scale text box.

4 Press the Enter key or Tab key.

461

Using keyboard shortcuts to change type attributes

You can use keyboard shortcuts to change the type point size, change leading values, adjust spacing , and change paragraph alignment.

To change the type point size from the keyboard:

Choose one of the following options:

• Press Command+Shift+> to increase the point size.

• Press Command+Shift+< to decrease the point size.

The point size changes by the increment set in the Size/Leading text box in the

General Preferences dialog box . The default is 2 points.

Door of the palace

Door of the palace

Door of t

Point sizes

462

To change the leading value from the keyboard:

1 Select any type container or type path using a selection tool, or select a block of type using the type tool .

2 Choose one of the following options:

• Press Option+Up Arrow to decrease the leading.

• Press Option+Down Arrow to increase the leading.

The leading changes by the increment set in the Size/Leading text box in the

General Preferences dialog box .

To change the alignment of a selected paragraph from the keyboard:

• For left alignment, press

Command+Shift+L.

• For Center alignment, press

Command+Shift+C.

• For right alignment, press

Command+Shift+R.

• For justified alignment, press

Command+Shift+J.

• To justify the last line, press

Command+Shift+B.

463

Adjusting spacing using the keyboard

The Keyboard Increments options of the

General Preferences dialog box let you set the increments in which baseline shift and kerning/tracking values increase or decrease when you use keyboard shortcuts. The default key increment values are 2 points for size/leading, 2 points for baseline shift, and 20/1000 of an em space for kerning/tracking.

The Keyboard Increments option controls the following keyboard shortcuts:

• Command+Shift+> increases the point size.

• Command+Shift+< decreases the point size.

• Option+Down Arrow increases the leading.

• Option+Up Arrow decreases the leading.

• Option+Right Arrow increases the kerning/tracking.

• Option+Left Arrow decreases the kerning/tracking.

464

• Option+Command+Right Arrow increases the kerning/tracking five times.

• Option+Command+Left Arrow decreases the kerning/tracking five times.

• Option+Shift+Up Arrow increases the baseline shift.

• Option+Shift+Down Arrow decreases the baseline shift.

The type units preference determines the units for point size, leading, kerning, tracking, and baseline shift.

To change keyboard increments:

1 Choose File > Preferences > General.

2 Choose a unit of measure from the

Type Units pop-up menu.

3 In the Keyboard Increments box, enter the values you want for size/leading, baseline shift, and tracking/kerning.

4 Click OK.

465

Painting type

You can paint type, the type container, or the type path. You may want to paint the container to create a background for your type, or paint the type path as a visual base for the type.

To paint type, a type container, or a type path:

1 Choose one of the following options:

• To paint the type, use the selection tool to select the type.

• To paint a type container or type path, use either the direct-selection tool or the group-selection tool , and click once to select the path or object. Do not select the baselines.

• Use a type tool to select characters, words, or paragraphs.

2 Choose Object > Paint Style.

3 Paint the type or type path as desired.

For more information, see Setting paint attributes .

466

Transforming type

The selection tool lets you select an entire type path or type container so that you can transform the type along with the path or container. You can also transform individual type containers within linked type containers.

For more examples of transformed type, see the Adobe Illustrator Tutorial and

Beyond the Basics.

To transform type including its path:

1 Choose one of two options:

• To transform all of the type, use the selection tool to select the type path or type container, or click its baseline.

• To transform individual type containers in a series of linked type containers, use the direct-selection tool to select the linked type containers you want to transform. Make sure the baselines appear, indicating that the type is selected within the containers.

467

Note: To transform a type path or type container without transforming type, use the group-selection tool to select just the path. Verify the baselines don’t appear, indicating type is deselected.

Select the rotate , scale , or shear tool to transform the type container and its path.

In the heart of the island of

Niphon and in a mountainous region, fifty

In the hear in a mountainous region, fifty leagues f the from Y okohama, lies

Rotated type container

Rotated type container and type

In the heart of the island of Niphon and in a mountainous region, fifty leagues from Yokohama, lies the ancient city of the dead—the necropolis

In the heart of the island of Niphon and in a mountainous region, fifty leagues from

Scaled type container

Scaled type container and type

468

Modifying letterforms as graphic objects

The Create Outlines command lets you turn type into a set of compound paths that you can edit and manipulate as you would any other graphic object. To use the Create Outlines command with a given typeface, you must have the Type

1 or TrueType font outlines for that typeface installed on your system.

The Create Outlines command retains all formatting of the selected type. It also retains the paint attributes of the type; for example, if the type is stroked, the outlines are also stroked.

You must convert all the type to outlines; you cannot convert a single letter within a selected string of type. To convert a single letter into an outline, create a separate piece of type containing only that letter.

469

Editing type outlines

Painting type outlines

Tip: If you select type outlines and choose Object > Compound Paths >

Release, you can use the outlines as type areas.

To convert type to path outlines:

1 Using a selection tool, select the type you want to convert.

Note: To convert type to outlines, you must select type with a selection tool, not a type tool.

2 Choose Type > Create Outlines.

470

To use several outlined letters as a mask:

1 Select all of the letters.

2 Choose Object > Compound Paths >

Make.

3 Make a mask as described in Working with masks .

471

Working with columns of text

Illustrator provides several commands that make it easy to create and work with columns, or blocks, of type.

See

• Importing text files

• Exporting text files

• Displaying overflow text

• Linking type containers

• Creating rows and columns

• Wrapping type around a graphic object

• Greeking type below a specified font size

472

Importing text files

You can import text files into the Adobe

Illustrator program from other applications. Once you have created an insertion point with any of the type tools, use the Place command to import type.

Illustrator uses the Claris® XTND document format translator to import text from word processor and page layout applications. You can import text from any document type for which an XTND translator has been installed.

Note: You can also paste in text that has been cut from another application and is on the Clipboard. However, the styles and fonts will not be retained.

To import text:

1 Use one of the type tools to define the point or area in which the imported text will appear. If you don’t, Illustrator uses the page boundary as the boundary for the imported text.

2 Choose File > Place.

473

3 Select the text document you want to open, and click Place. The text from the document you selected flows into the type container.

Most of the styles you used in typing the original document are retained. If the original text is word-wrapped and you import it as a point-type object, each paragraph appears on a single line.

474

Exporting text files

The Export command exports text to a new text file in one of 14 file formats

(for example, WordPerfect®, Microsoft®

Word®, or Rich Text Format). You must have the Claris XTND utility installed to use the Export command. (This utility as installed if you used the Easy Install option when copying the Adobe Illustrator program onto your hard disk drive.)

See File formats supported in Adobe

Illustrator and Exporting artwork for more information.

To export text:

1 Using a type tool, select the text to export.

2 Choose File > Text > Export.

3 Select the desired file format in the

Export File pop-up menu.

4 Type the name of the new text file in the name box.

5 Click Export.

475

Displaying overflow text

If your type container is too small, you won’t be able to see all of the text within it. You can adjust the type container so that all of the text is visible.

To display all text:

Choose one of the following options:

• Adjust the size of the type container .

• Link the type container to another type container so that the overflow text flows into the second type container.

Create one or more copies of the type container, if necessary.

476

Linking type containers

You can link type containers that have been created with the type tool or the area-type tool. When you link type containers, type flows from one object to another based on the type container’s stacking order . Type flows first into the backmost object in the stacking order and continues to the next object in the stacking order. The most recently created object is frontmost.

In the heart of Niphon in a mountainous and wooded region, fifty leagues from

Yokohama, is hidden the ancient city of the dead— the necropolis of Japanese

Emperors.

Resting on the slope of the

Holy Mountain of Nikko, under a cover of dense forest and in the midst of cas-

Unlinked type containers

477

In the heart of Niphon in a mountainous and wooded region, fifty leagues from

Yokohama, is hidden the ancient city of the dead— the necropolis of Japanese

Emperors.

Resting on the slope of the

Holy Mountain of Nikko, under a cover of dense forest and in the midst of cascades whose roar called them into existence, among the ferns and mosses and green dampness, over- arched by dark branches and bordered by the wildness and grandeur of

Nature, lies this ancient structure. Here are both the living and the dead— an unforgettable setting of wilderness that serves as

Linked type containers

See also

• Changing the type flow

• Copying a linked type container

• Unlinking and removing type containers

To link type containers:

1 Select the selection tool .

2 Drag to surround the type containers to be linked, or click with the selection tool. The baselines should be selected.

3 Choose Type > Link Blocks.

478

Changing the type flow

You can change the order in which type flows by changing the stacking order of type containers using the Send to Front and Send to Back commands. You can adjust the stacking order before or after linking type.

Copying a linked type container

If you run out of room for type in a container, you can create a copy of the container for overflow type.

See also Unlinking and removing type containers .

To create a linked copy of a type container:

1 If you are not already in Artwork view, choose View > Artwork.

2 Select the direct-selection tool , and position the pointer on the type container. Make sure the baselines aren’t selected.

3 Hold down the Option key and drag the copy of the container to where you want to position it. Hold down the Shift key to constrain the tool to multiples of

45 degrees.

4 When the new type container is in position, release the mouse button, and then the Option and Shift keys. It is important to release the mouse button before you release the Option and

Shift keys.

480

The type flows from the first type container to the second, and the two type containers are linked.

In the heart of Niphon in a mountainous and wooded region, fifty leagues from

Yokohama, is hidden the ancient city of the dead— the necropolis of Japanese

Emperors.

Resting on the slope of the

Holy Mountain of Nikko, under a cover of dense forest and in the midst of cas-

Option-dragging to create linked copy

In the heart of Niphon in a mountainous and wooded region, fifty leagues from

Yokohama, is hidden the ancient city of the dead— the necropolis of Japanese

Emperors.

Resting on the slope of the

Nature, lies this ancient structure. Here are both the living and the dead—an unforgettable setting of wilderness that serves as the

Type linked automatically

You can choose Arrange > Repeat Transform to create additional columns.

481

Unlinking and removing type containers

You can unlink type containers to change their Stacking order without affecting the flow of type. However, to return the type to its original object, you must cut and paste the type. To delete a single or unlinked type container without deleting the type within it, copy and paste the text elsewhere, and then delete the container.

To unlink linked type containers:

1 Select the selection tool .

2 Drag to surround the type containers to be unlinked, or click with the selection tool.

3 Choose Type > Unlink Blocks.

To remove or replace a linked type container without deleting the type:

1 Select the group-selection tool .

2 Click the edge of the type container you want to remove.

482

3 Click Delete. The type container you selected disappears, and the type that it contained flows into the next grouped or linked object in the stacking order.

4 To add a new type container, create or select the type container; then hold down the Shift key and use the groupselection tool to click the old type container to which you want to link the new type container. Then choose Type > Link

Blocks. The type flows into the new type container.

483

Creating rows and columns

The Rows & Columns dialog box lets you divide rectangles and text blocks into blocks of rows and columns and precisely change the height, width, and gutter size between rows and columns.

You can also use the Rows & Columns dialog box to change the way in which text flows (from left to right or up and down) by clicking the Text Flow icon.

Text flow options

Note: You can also create rows and columns of linked type containers using the instructions in Linking type containers .

Using the Rows & Columns dialog box also is a fast way to create guides for laying out artwork; see Using guides .

484

To divide a rectangular graphic object or type container into rows and columns:

1 Using the selection tool , select a rectangle or type container.

Note: If the object is not rectangular, it will be converted into rows and columns based on the object’s rectangular bounding box.

2 Choose Type > Rows & Columns.

3 Enter the number of columns you want in the Columns text box, and the number of rows you want in the Rows text box. You can either enter the number in the text boxes or use the control buttons on the sides of the text boxes to increase or decrease the values in the text boxes. The dialog box adjusts the column-width and row-height values to fill the selected text box.

4 Change the dimensions of the column width, row height, column gutter, row gutter, or overall width and height by entering a new value in the corresponding text box or by using the arrow controls to increase or decrease the value in the text box.

485

5 Choose any of the following options:

• To change the direction of the text flow from left to right or from top to bottom, click the Text Flow icon.

• To preview the effect, select the

Preview option.

• To add path guides along the row and column edges, select the Add Guides option.

6 Click OK.

486

Wrapping type around a graphic object

You can make type wrap around any graphic object, including type paths and compound paths, by using the Make

Wrap command. You must use area type when wrapping type around a path; point type and path type do not wrap around an object. You can make one or several type containers wrap around any number of objects.

To wrap type around a graphic object:

1 Make sure that the object or objects around which you want to wrap type are in front of the type. If necessary, use the Bring to Front or Paste in Front commands to position the objects in front.

2 If desired, use any of the drawing tools to outline a graphic boundary for the area around which the type will wrap. (This is necessary if you want to wrap text around a bitmap image.) If the boundary is stroked or filled, it must be behind the graphic element but in front of the type.

487

You can use an unpainted graphic boundary to control how closely type wraps around an object, such as a large initial capital letter. You can then adjust and resize the unpainted boundary using a selection tool to achieve the exact kind of text wrap you want.

Note: If you are importing an Adobe

Photoshop image, you can import the clipping path along with it to serve as the graphic boundary for the image.

3 Using the selection tool , select the type containers that you want to wrap and the graphic object around which to wrap them.

4 Choose Type > Make Wrap. The type wraps around the graphic object.

In the heart of the large island of Niphon in a mountainous region, fifty leagues from Yokohama, is is hidden the ancient city of the dead the necropolis of Japanese Emperors. Resting on the descending edge of the Holy Mountain of Nikko, under a cover of dense forest and in the midst of cascades whose roar called them into existence,

Type containers and graphic boundary selected

488

In the heart of the large island of Niphon in a mountainous area, fifty leagues from

Yokohama, is is city of the dead

Japanese Emperors. scending edge of hidden the ancient the necropolis of

Resting on the dethe Holy Mountain of Nikko, under a cover of dense forest and in

Make Wrap command applied

To separate a wrapped type container from a graphic object:

1 Select the type container or graphic object.

2 Choose Type > Release Wrap.

489

Greeking type below a specified font size

Adobe Illustrator greeks—displays as a dimmed bar—type below a specified type size, as set in the Greek Type Limit text box in the General Preferences dialog box . Any type at or below the specified type size is replaced on-screen with nonletterforms that act as placeholders in the artwork. Greeking type affects only artwork displayed onscreen, not the printed image.

In addition, if you reduce the document view so that type on-screen falls below the Greek type limit, the type appears greeked. For example, if the Greek type limit is set at 6 points, 12-point type viewed at a 50% zoom level appears greeked.

To set the greek type limit:

1 Choose File > Preferences > General.

2 Enter a value in points in the Greek

Type Limit text box, and then click OK.

490

Formatting columns and paragraphs

Various Illustrator functions are especially useful for working with larger groups of type, such as type laid out within columns.

See

• Specifying paragraph indentation

• Specifying alignment options

• Specifying hanging punctuation

• Specifying spacing options

• Using the Tab Ruler palette

• Fitting headline type

• Hyphenating words

491

Specifying paragraph indentation

Indentation specifies the amount of space between the ends of each line of type and the path that contains that type. You can indent from the left or the right side of the path, and you can choose additional indentation for the first line of a paragraph. Negative indentation moves the type outside the margin. Hanging punctuation controls whether punctuation marks fall inside or outside the margins.

Indentation is measured in the type units specified in the General Preferences dialog box and is selected using the Paragraph palette.

492

Indentation affects only the selected paragraph or paragraphs.

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead—the necropolis of Japanese Emperors.

Resting on the descending edge of the

H o l y M o u n t a i n

Left indentation

In the heart of the large island of

Niphon and in a mountainous and wooded region, fifty leagues from

Yokohama, lies hidden the ancient city of the dead— the necropolis of

J a p a n e s e E m perors.

Left and right indentation

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead—the necropolis of Japanese

Emperors.

Resting on the descending edge of the Holy

Mountain Nikko, below

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokoha- ma, lies hidden the ancient city of the dead—the necropolis of Japanese Emperors.

Resting on the descending edge of the Holy

Mountain Nikko, be-

First line indentation

First line negative indentation

493

To specify paragraph indentation:

1 Select any type container or type path using a selection tool, or set an insertion point or select a block of type using the type tool .

2 Choose Type > Paragraph.

3 Select the indentation text box you want to change (right, left, or first line), and enter an indentation value.

4 Press the Enter key or Tab key.

494

Specifying alignment options

Alignment controls how lines of type are arranged in paragraphs. Each paragraph

(or line in point type) can have any of these alignment options:

• Left alignment, the default option, aligns type on the left margin, with a ragged right edge.

• Right alignment aligns type on the right margin, with a ragged left edge.

• Centered alignment centers each line of type between margins.

• Justified alignment adjusts type to extend to both the left and right margins by adding space to the line of type. Point type and path type cannot be justified, unless they are linked.

• Justify Last Line justifies all the type, and forces the last line in a paragraph to be justified out to both margins.

By default, the last line of a justified paragraph is left-aligned with a ragged right margin.

See also Using keyboard shortcuts to change type attributes .

495

In the heart of the island of Niphon and in a mountainous region, fifty leagues from

Yokohama, lies the ancient city of the dead— the necropolis of Japanese Emperors.

In the heart of the island of Niphon and in a mountainous region, fifty leagues from

Yokohama, lies the ancient city of the dead— the necropolis of Japanese Emperors.

Justified and justify Last Line

In the heart of the island of Niphon and in a mountainous region, fifty leagues from

Yokohama, lies the ancient city of the dead— the necropolis of Japanese Emperors.

In the heart of the island of Niphon and in a mountainous region, fifty leagues from

Yokohama, lies the ancient city of the dead— the necropolis of Japanese Emperors.

Left and right alignment

496

In the heart of the island of Niphon and in a mountainous region, fifty leagues from

Yokohama, lies the ancient city of the dead— the necropolis of Japanese Emperors.

Center alignment

To change alignment options from the

Paragraph palette:

1 Select any type container or type path using a selection tool, or set an insertion point or select a block of type using the type tool .

2 Choose Type > Paragraph.

3 Click the alignment style you want.

To change alignment options from the

Type menu:

1 Select any type container or type path using a selection tool, or set an insertion point, or select a block of type using the type tool .

2 Choose Type > Alignment followed by the alignment option you want.

497

Specifying hanging punctuation

Hanging punctuation controls whether punctuation marks fall inside or outside the margins. If hanging punctuation is turned on, the following characters appear outside the margins: periods, commas, single-quotation marks, double-quotation marks, apostrophes, hyphens, em dashes, en dashes, colons, and semicolons.

s and surwildness of Nature, an unforis and surwildness

of Nature, r an unfor-

Hanging Hanging punctuation off punctuation on

498

To select hanging punctuation:

1 Select any type container or type path using a selection tool, or set an insertion point or select a block of type using the type tool .

2 Choose Type > Paragraph.

3 Select the Hanging Punctuation option.

499

Specifying spacing options

Spacing options include options for controlling the word spacing and letterspacing in lines of justified or unjustified type.

Spacing options are always applied to an entire paragraph. To adjust the spacing in only a few characters, use the

Tracking option; see Specifying kerning and tracking for more information.

To change spacing in text

1 Select any type container or type path using a selection tool, or set an insertion point.

2 Choose one of two options:

• Choose Type > Spacing.

• Choose Type > Paragraph.

500

3 Choose one or both of the following options:

• To change the amount of space between words in a line of type, enter a minimum, desired, and maximum value in the Word Spacing text boxes. (With unjustified text, only the Desired option is available.) For justified text, the default values for word spacing are

100% minimum, 100% desired, and

200% maximum. At 100%, no additional space is added between words.

• To change the amount of space between letters in a line of text, enter a minimum, desired, and maximum value in the Letter Spacing text boxes. (With unjustified text, only the Desired option is available.) The default values for letterspacing are 0% minimum, 0% desired, and 5% maximum. Zero percent means that no space is added between letters.

501

Both word spacing and letterspacing are measured as percentages of the width of a space in the selected type size.

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead—the necropolis of Japanese Emperors.

In the heart of the large island of

Niphon and in mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead—the

Word spacing

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead—the necropolis of Japanese Emperors.

I n t h e h e a r t o f t h e l a r g e i s l a n d o f

N i p h o n a n d i n a m o u n t a i n o u s a n d w o o d e d r e g i o n , fi f t y l e a g u e s f r o m

Yo k o h a m a , l i e s h i d d e n t h e a n c i -

Letterspacing

502

Using the Tab Ruler palette

The Tab Ruler palette lets you quickly set left, right, center, and decimal-point tabs in type. When setting tabs, a visual tab guide appears in the selected type to help you set tabs, even if the type path is rotated or wrapped. The units of measure for the tab ruler are defined by the units of measure specified in the

Document Setup dialog box .

To set tabs in text:

1 Select any type container or type path using a selection tool, or set an insertion point or select a range of text using the type tool .

2 Select Window > Show Tab Ruler.

jump to art

3 Choose from these options:

• Click the Alignment box at the upper right of the palette to align the Tab Ruler with the left margin of the text.

503

• Drag the Extend Tab Ruler button at the lower right of the palette to extend the ruler.

• Select the Snap option to snap tabs to ruler units as you drag them. You can also hold down the Control key as you drag tabs to turn the Snap option on or off temporarily.

4 Click the Tab Ruler where you want the tab to appear. The tab position (relative to the left margin of the selected text) appears in the top center of the palette.

5 Choose the type tool, and click to set an insertion point in the text; then press the Tab key to move the text to the next tab.

To change an existing tab setting:

1 With the Tab Ruler palette open, click a tab mark to highlight it. Click one of the Tab Style buttons to change the tab style:

• Left-Justified Tab. Justifies text to the left, keeping the right margin ragged.

504

• Center-Justified Tab. Centers text on the tab mark.

• Right-Justified Tab. Justifies text to the right, keeping the left margin ragged.

• Decimal-Justified Tab. Justifies text in alignment with a decimal point (useful for creating columns of numbers).

2 Choose any of the following options:

• To move a tab, drag it to a new position. As you drag, a line indicates where the tab is moving in the text.

• To remove default tabs, drag to the right.

• To replace default tabs, drag to the left.

• To simultaneously move all tab stops to the right of the selected tab, hold down the Shift key while dragging the tab stop.

• To remove a tab you’ve created, drag it off the top or left side of the ruler.

505

Tab Ruler palette

Snap option

Decimal tab

Right tab

Center tab

Left tab

Tab position

Extend tab ruler button return to text

Fitting headline type

Adobe Illustrator lets you fit type across the full width of a type path in an object by using the Fit Headline command. The

Fit Headline command works with

Adobe multiple master fonts by adjusting the weight of the font and the tracking value when distributing type along a path. The Fit Headline command works with other fonts by adjusting only the tracking value.

See also Specifying kerning and tracking .

If you change the tracking value or the type, be sure to reapply the Fit Headline command.

THE JADE PALACE

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead— the necropolis of Japanese Emperors.

T H E J A D E P A L A C E

In the heart of the large island of Niphon and in a mountainous and wooded region, fifty leagues from Yokohama, lies hidden the ancient city of the dead— the necropolis of Japanese Emperors.

Fit Headline before and after

507

To fit headline type across a specified area:

1 Enter type in a type container using the type tool or area-type tool .

2 Select the type using any type tool.

3 Choose Type > Fit Headline.

508

Hyphenating words

The autohyphenation feature automatically hyphenates words where appropriate at the ends of lines. You can set the hyphenation parameters in the Paragraph palette. If you select the autohyphenation option, you can specify the minimum number of letters allowed at the beginning or end of a word before allowing a hyphen to be inserted. You can also limit the number of consecutive hyphenated lines.

You can enter a discretionary hyphen to hyphenate a word manually. Adobe

Illustrator always breaks a word at a discretionary hyphen, regardless of the autohyphenation setting.

You can specify the hyphenation for a specific word, or exclude a word from being hyphenated, by using the

Hyphenation Options command .

You can select the language in which the hyphenation exception takes place by Specifying the hyphenation language .

509

To enter a discretionary hyphen:

1 Select a type tool and click where you want to enter the hyphen.

2 Press Command+Shift+hyphen.

To set the auto hyphenate feature:

1 Choose Type > Paragraph.

2 Select the Auto Hyphenate option. If the Hyphenation options are not visible, click the display control in the Paragraph palette.

3 In the Hyphenation text boxes, enter the minimum number of letters allowed at the beginning and end of a word before a hyphen is inserted.

4 If desired, select the Limit Of option, and enter the maximum number of consecutive hyphenated lines.

510

Using the Hyphenation Options command

The Hyphenation Options command lets you specify any words you don’t want

Illustrator to hyphenate and defines which language dictionary is used.

To specify how a word may be hyphenated in Adobe Illustrator:

1 Choose File > Preferences > Hyphenation Options.

2 If desired, choose the language in which the hyphenation rules apply from the Languages pop-up menu. When you select a different language, the rules for hyphenating words change to match that language’s rules. (You can also change the hyphenation language for just the active document by using the

Languages pop-up menu in the Character palette.)

511

3 Enter the word for which you want to specify hyphenation characteristics. If you enter the word with no hyphens,

Adobe Illustrator never hyphenates the word. If you enter the word with one or more hyphens inserted, Adobe Illustrator hyphenates the word only at those places.

4 Click Add.

5 To remove a word from the hyphenation list, click the word to select it, and then click Delete.

512

Specifying the hyphenation language

The Language option controls the dictionary used to apply hyphenation rules to the selected text. Various languages, such as U.S. English, U.K.

English, French, German, and Italian, are available.

To specify the hyphenation language:

1 Choose Type > Character.

2 Choose a language from the

Language pop-up menu.

3 Press the Enter key or Tab key.

513

Editing text

You can use the standard word-processing methods to edit selected text.

To edit text:

1 Select the text that you want to edit.

You can choose Edit > Select All to select all the text along or within the path.

2 Choose any of the following options:

• Type over the text.

• Choose Edit > Cut to remove the text.

• Choose Edit > Copy to copy the text.

• Choose Edit > Paste to paste cut or copied text.

• Press Delete to delete the text.

Choose from four commands when editing text blocks: see

• Checking spelling

• Finding and replacing text

• Changing capitalization

• Using smart punctuation

514

Checking spelling

The Check Spelling command compiles a list of misspelled words in a document and offers a list of alternative spellings.

If Illustrator has incorrectly identified a word as misspelled, you can either skip the word without changing it in the document or add the word to the dictionary list. These new words are then added to the custom file AI User Dictionary in the

Plug-ins folder. You can edit this list of words as well.

To check the spelling in your document:

1 Choose Type > Check Spelling. The

Check Spelling dialog box displays a list of words not found in the current Adobe

Illustrator dictionary.

2 To list separately words that are misspelled in the same way but are in different cases (such as Mispell and mispell), select the Case Sensitive option.

515

3 To get a list of alternative spellings for a misspelled word, click the word in the Misspelled Words list. The first instance of that word is highlighted in your document, and any alternative spellings appear in the Suggested

Corrections list.

4 Choose one of three options:

• To enter a new spelling for a misspelled word, either click the correct spelling in the Suggested Corrections text box or type the corrected spelling in the Change text box. To change the first instance of the misspelled word in the document, click Change or doubleclick the word. To change every instance of the selected misspelled word in the document, click Change All.

• To skip a word without changing it, click Skip. To skip every instance of the word in the document, click Skip All.

This option removes the word from the

Misspelled Words list, but the word will reappear the next time the document is checked.

516

• To add the word to your dictionary, click Learn. (To add several words at once, hold down the Shift or Command key while clicking or dragging the mouse to select the words.)

5 To edit your current dictionary list, click Edit List and choose one of three options:

• To change a word in the dictionary list, select a word in the list, retype it in the text box, and then click Change.

• To add a new word, type it in the text box, and then click Add.

• To remove a word, select the word, and then click Remove.

6 When you have finished, click Done.

To change language dictionaries in the

Spell Checking filter:

1 Choose Type > Check Spelling.

2 Click Language. Locate the language dictionary in the Plug-ins folder inside the Adobe Illustrator 6.0 folder.

3 Select the language dictionary you want to use, and click Open.

517

Finding and replacing text

The Find command finds and replaces text strings on paths and within type containers while retaining the type style, color, kerning, and other type attributes of the text.

To find and replace text:

1 Choose Type > Find.

2 Enter the text string you want to find and, if desired, the text string with which you want to replace it.

3 Choose any of the following options:

• Select the Whole Word option to search only for entire words that match the text in the Find text box.

• Select the Case Sensitive option to search only for text strings that exactly match the uppercase and lowercase text in the Find text box.

• Select the Search Backwards option to search the document in reverse order from the insertion point to the beginning of the document.

518

• Select the Wrap Around option to search the entire document, starting from the text selection point to the end of the document, and then from the beginning of the document to the text selection point.

4 Choose one of the following options:

• Select the Find Next option to search for the next instance of the text string, without replacing it.

• Select the Replace, then Find option to replace the text string and then search for the next instance of it.

• Select the Replace option to replace just the currently found instance of the text string in the document.

• Select the Replace All option to replace all occurrences of the text string in the document.

519

Changing capitalization

The Change Case command enables you to change text from the current case setting to all uppercase, all lowercase, or mixed case (that is, each word beginning with an uppercase letter).

city on the edge

City On The Edge

CITY ON THE EDGE

Lowercase, mixed case, and uppercase text

To change the capitalization of selected text:

1 Select a type tool, and select the text to be changed.

2 Choose Type > Change Case.

3 Select the Upper Case, Lower Case, or

Mixed Case option, and click OK.

520

Using smart punctuation

The Smart Punctuation dialog box searches for keyboard text symbols and replaces them with publishing text symbols. It can also report the number of symbols replaced.

To turn on the Smart Punctuation feature for the document:

1 Choose File > Preferences > General.

2 Select the Smart Punctuation option, and then click OK.

To replace standard keyboard characters with publishing characters:

1 Choose Type > Smart Punctuation.

2 Choose one or more of the Smart

Punctuation options:

• V, W, Y Ligatures. Changes any occurrence of the ff, fi, or letter combinations into ligatures (that is, a text symbol that combines two or more letters into a single, special character). To change to the ff and ffi ligatures, you must have the appropriate Adobe Expert font installed on your system.

521

• V, X, Z Ligatures. Changes any occurrence of the ff, fl, or ffl letter combinations into ligatures. To change to the ff and ffl ligatures, you must have the appropriate Adobe Expert font installed on your system.

fi ffi fl ffl fi ffi fl ffl

Ligatures before and after

• Smart Quotes (“ ”). Changes straight keyboard quote marks ('' '') and (' ') into printer’s quote marks (“ ”) and (‘ ’).

• Smart Spaces (. ). Replaces multiple spaces after a period with a single space.

• En, Em Dashes (--). Replaces a double keyboard dash (--) with an en dash (–) and replaces a triple keyboard dash (---) with an em dash (—).

522

• Ellipses (. . .). Replaces three keyboard periods (...) with an ellipsis character

(…).

• Expert Fractions. Replaces separate characters used to represent fractions with their single-character equivalents.

To change to expert fractions, you must have the appropriate Adobe Expert font installed on your system.

 ⁄ ⁄ ⁄ ⁄

¹⁄₂ ³⁄₄ ⁵⁄₈ ⁷⁄₁₆

Expert fractions before and after

3 Choose one of two options:

• Select the Entire Document option to search and replace text symbols in the entire document.

• Select the Selected Text Only option to replace symbols only in selected text.

523

4 Click the Report Results option to see a list of the number of symbols replaced.

5 Click OK to search for and replace selected characters.

524

Using Graphs

About graphs

Creating a graph

Adjusting graphs

Selecting graph options

Changing graph styles

Combining different graph styles

Customizing a graph

Selecting parts of a graph

About graph designs

Creating a graph design

Applying graph designs to a graph

525

About graphs

Adobe Illustrator’s graph tools let you create six different graph styles:

• Grouped column. The default graph style compares one item to another or compares different items over a period of time.

• Stacked column. This graph compares the progress of a group of variables over time or shows the relationship of parts to the total. The values for each category are stacked one on top of another, instead of side by side, as they are in a grouped column graph.

• Line. This graph shows the trend of one or more items over a period of time.

• Pie. This is a circular graph with wedges showing data segments and their percentages of the total.

• Area. Similar to the line graph, an area graph emphasizes totals as well as fluctuations in data over time.

526

• Scatter. This graph plots data points as paired sets of coordinates along the x and y axes. Scatter graphs are useful for identifying patterns or trends in data.

They also can indicate whether variables affect one another.

Grouped column Stacked column

Line Pie

527

Area Scatter

528

Creating a graph

You can create a graph by dragging with the graph tool or by specifying dimensions in the Graph dialog box.

To create a graph:

1 Double-click the graph tool , or choose Object

Graphs

Style.

2 Select the type of graph you want.

3 Select options for the selected graph style, as described in Selecting graph options .

4 Click OK.

5 Select the graph tool. The pointer changes to a cross when you move it to the active window.

6 Choose one of two options to create a graph:

• Position the pointer at one corner of the rectangular area in which you want to create a graph, and drag diagonally to the opposite corner. To drag from the center of the graph, hold down the

Option key and drag.

529

• Click the graph tool in the artwork where you want to create the graph, and then specify the dimensions for the graph in the Graph dialog box. By default, the Graph dialog box displays the dimensions of the most recently drawn rectangle, oval, or graph. Dimensions are determined by the ruler units set in the Document Setup dialog box.

A graph of the shape and dimensions you designate appears, along with the

Graph Data dialog box. Anchor points on the graph indicate that it is selected.

7 Enter the graph data .

See also

• Entering and editing graph data

• Adjusting graphs

• Changing graph styles

• Customizing a graph

530

Entering and editing graph data

You can enter data in a graph by:

• Typing it into the Graph Data dialog box

• Importing data from another application

• Copying and pasting data from other applications or from another graph.

See also

• Editing existing data

• Adjusting graphs

Note the following about graph data:

• You must select an entire graph before you can change its data.

• You can enter data in up to 32,767 rows by 32,767 columns, as memory permits.

• Graph data cannot contain any commas or other nonnumerical characters; if it does, the data is not plotted.

For example, you would enter

“245000,” not “245,000.”

531

To enter data manually:

1 Create a new graph using the procedure described in Creating a graph .

Make sure that the graph is selected.

2 If the Graph Data dialog box is not already open, choose Object

Graphs

Data.

Entry line

Row Column Cell

At the top of the worksheet is the entry line for entering data. You enter labels and then data that correspond to the labels. Each label or value you enter is placed in a separate cell. A cell is the intersection of a row and a column.

532

Labels are words or numbers that describe two things: categories, whose data is entered in rows; and legends, whose data is entered in columns. In the final graph, legends appear as boxes that you can place above or to the right of a graph.

Entering labels and data for particular graph styles

Labels can be words that describe columns of data, or they can be years, months, or days for comparing data over time.

Follow these additional guidelines for entering data for the selected graph style:

• For grouped and stacked column graphs, enter numbers along the vertical (y) axis; enter labels for the data along the horizontal (x) axis.

• For grouped and stacked column graphs, the height of the column corresponds to the amount being compared.

For grouped column graphs, you can combine positive and negative values; negative values appear as columns extending below the horizontal axis. For stacked column graphs, numbers must be all positive or all negative.

537

• For line graphs, enter numbers representing quantities along the y axis; enter numbers representing time along the x axis. Each column of data corresponds to one line in the line graph. You can combine positive and negative values in a line graph.

• For pie graphs, plot only one row of data, either all positive or all negative values. If you plot additional rows of data, a separate pie graph is created for each additional row. You cannot combine positive and negative values.

The size of the individual pie graphs is proportional to the total of each graph’s data.

• For area graphs, plot at least two rows of data; values must be all positive or all negative. Each row of data entered corresponds to a filled area on the area graph. Area graphs add each column’s values to the previous column’s totals.

Therefore, even if area graphs and line graphs contain the same data, they appear substantially different.

538

• For scatter graphs, enter one column of data each along the y axis and the x axis. A scatter graph differs from the other kinds of graphs, because both axes measure values; there are no categories. If the first column contains labels, it is ignored, and the second column produces values for the y coordinates.

For additional illustrations of how different graph styles plot data, see Selecting graph options .

539

Importing data from another application

If you first save data files as text in other applications, you can import the data files into Adobe Illustrator. In the text files, each cell must be separated by a tab, and each row must be separated by a carriage return.

You can also cut and paste data from a spreadsheet application such as

Lotus

1-2-3 using the Cut and Paste commands.

The data must not contain any commas; otherwise, the data is not plotted. For example, enter “732000” not “732,000”.

You can also subscribe to data that is updated interactively, from the original source, Using the Publish and Subscribe commands .

To import data from another application:

1 Create a new graph. Make sure that the graph is selected.

540

2 If the Graph Data dialog box is not already open, choose Object >

Graphs > Data.

3 Click to select the cell that will be the top left cell of the data that you import.

4 Click Import.

5 Open the file that you want to import.

The data is imported and entered into the worksheet in the Graph Data dialog box.

6 Click OK. The graph is updated with the imported data.

541

Copying and pasting data from other applications

You can copy data from another application and paste it into the Graph Data dialog box by using the Clipboard.

To copy and paste data from another application:

1 Open the application and file containing the data you want to copy, and choose Edit > Copy to copy the data to the Clipboard.

2 Open the Adobe Illustrator program.

3 Create a new graph. Make sure that the graph is selected.

4 If the Graph Data dialog box is not already open, choose Object >

Graphs

Data.

5 Click to select the cell that will be the top left cell of the data you will paste.

6 Choose Edit

Paste. The data is pasted into the cells in the Graph Data dialog box.

7 Click OK. The graph is updated with the pasted data.

542

Editing existing data

You can edit data you have entered in the Graph Data dialog box. The Cut and

Copy commands move data to the Clipboard; the Paste command moves data from the Clipboard into a worksheet.

The Clear command erases the entire selection, either within the text or as a set of cells. The Delete key functions as both a Delete and Backspace key for a single cell.

To edit existing data:

1 Click to select the cell you want to edit. The cell is highlighted, and the cell’s data is shown in the entry line.

2 Choose one of the following options for editing data:

• Enter a value in the selected text box.

• Position the pointer in the entry line, and click to set an insertion point. Type new information in the entry line.

• Press Delete to delete an entire cell entry.

543

• Use the Cut, Copy, Paste, or Clear command in the Edit menu to edit the data. You can cut and paste any cell or group of cells to another selected cell or group of cells.

3 Click OK.

544

Adjusting graphs

You can adjust graphs using the Graph

Data dialog box by:

• Transposing rows and columns of data

• Transposing the x and y axes in scatter graphs

• Adjusting cell column width

• Adjusting decimal precision

545

Transposing rows and columns of data

If you accidentally enter graph data backward (that is, in rows instead of columns, or vice versa), you can use the

Transpose command to switch the columns and rows of data. The Transpose command reverses the categories and legends and reenters all the data accordingly.

To transpose rows and columns of data:

1 Choose Object

Graphs

Data.

546

2 Click Transpose. Labels and data that were listed across the top row are now listed along the left column.

"1980"

"1990"

45.00

62.00

66.00

72.00

A B

1980 1990

Default column graph

"1980"

45.00

62.00

"1990"

66.00

72.00

1980 1990

Data transposed

547

Transposing the

and

axes in scatter graphs

You can reverse the x and y axes to display data better on scatter graphs using the Switch XY option. This option is available only for scatter graphs because only scatter graphs plot values on both axes. You do not need to reenter data; the Switch XY option does this automatically.

To transpose the x and y axes in a scatter graph:

1 Choose Object

Graphs

Data.

2 Click Switch XY to reverse the data columns.

548

Adjusting cell column width

In the Graph Data dialog box, the default cell column width is seven digits. The actual width varies according to the selected typeface. You can change the default column width by dragging the column boundary to make one column wider or narrower, or by entering a new value in the Cell Style dialog box.

To adjust a cell’s column width manually:

1 In the Graph Data dialog box, position the pointer at the top of the column you want to adjust. The pointer changes to a double arrow.

2 Drag the handle to the desired position.

549

To reset the column width, you must drag the column width again; you cannot use the Cell Style dialog box. If you change the column width to zero, the column reverts to the column width set in the Cell Style dialog box.

To change the width of columns you have not previously changed manually:

1 Click Cell Style in the Graph Data dialog box.

2 Enter a value between 3 and 20 in the

Column Width text box. Click OK.

Changing the value in the Column Width text box changes the column’s width in the Graph Data dialog box only; it has no effect on the graph’s column width.

550

Adjusting decimal precision

You can define the number of decimals in which you want numbers displayed by using the Number of Decimals text box in the Cell Style dialog box. The default is 2. This means that if you enter the number 4, it appears in the Graph

Data dialog box as 4.00; if you enter the number 1.55823 with the Number of

Decimals text box set to 2, the cell displays 1.56.

The program keeps the original data in memory; so, if you reset the Number of

Decimals text box to 5, the cell displays

1.55823. Changing the decimal precision does not alter the display of the graph.

To adjust decimal precision:

1 Click Cell Style in the Graph Data dialog box.

2 Enter a value between 0 and 10 in the

Number of Decimals text box. Click OK.

551

Selecting graph options

Depending on the graph style chosen, additional options are available (with the exception of area graphs).

To select graph style options:

1 If you want to change an existing graph, select the entire graph.

2 Choose Object > Graphs > Style, or double-click the graph tool.

3 To choose options for the selected graph style, see

• Selecting grouped column and stacked column options

• Selecting line graph options

• Selecting pie graph options

• Selecting scatter graph options

See also

• Specifying the axis position

• Setting axis tick mark and label options

552

• Adding a drop shadow to a graph

• Displaying legends across the top of a graph

• Displaying overlapping columns of data

553

Selecting grouped column and stacked column options

Grouped column and stacked column graph options are the same. They include

• Column Width. By default, the column width is 90%.

• Cluster Width. A cluster is a group of columns corresponding to a row of data in the work sheet. Cluster width is the total width of all columns in a cluster.

The default cluster width is 80%. If you are using stacked column graphs exclusively, it is recommended that you set the cluster width to 100% and use only the Column Width option to adjust the width.

Column width and cluster width values can range from 1% to 1000%. These values allow space between columns and between clusters. A value of 100% moves both columns and clusters flush against each other. A value above 100% causes the columns and clusters to overlap one another.

554

Column

Cluster

1980 1990

Column and cluster widths

150

120

1980 1990

Stacked column graph

555

Selecting line graph options

There are four graph style options for line graphs:

• The Mark Data Points option places square markers at each data point.

• The Connect Data Points option draws lines that connect the data points and makes it easier to see relationships between data.

• The Fill Lines option becomes available when you select the Connect Data

Points option. The Fill Lines option creates a wider line according to the value you enter, and fills the line with paint according to the specifications for that series of data. When you choose the

Fill Lines option, a check mark appears in its check box; if you then deselect the

Connect Data Points option, the Fill

Lines option is dimmed. The check mark indicates that you can recall the line width value without having to specify it again in the Connect Data Points option.

556

• The Edge-to-Edge Lines option draws lines that extend across the graph, from left to right along the horizontal (x) axis.

25 50 75 100

Line graph

557

Selecting pie graph options

Three graph style options let you choose how to display legends with pie graphs:

• The Standard Legends option places column labels outside the graph; this option is the default. When you combine pie graphs with other kinds of graphs, select the Standard Legends option.

• The Legends in Wedges option inserts labels in the corresponding wedge.

• The No Legends option omits legends entirely.

A B C D

Pie graph with legends across top

Pie graph with legends in wedges

558

Percentages and legends are painted black by default. If a pie wedge with a dark background obscures a legend, repaint the dark background. Use the group-selection tool to select the dark pie wedges, and paint the wedge using the Paint Style palette.

See also Displaying legends across the top of a graph .

559

Selecting scatter graph options

Selecting scatter graph options is the same as for selecting line graph options , except that the Edge-to-Edge option is not available. The default options for scatter graphs are Mark Data Points and

Connect Data Points.

10 30 50

Scatter graph

560

Specifying the axis position

You can specify whether to display the vertical (y) axis on the left side, the right side, or both sides of the graph. The default is Use Left Axis. You must select the entire graph to use the Same Axis

Both Sides option.

See Combining different graph styles for more information on changing axis attributes when a graph has more than one graph type.

To specify the axis position:

1 In the Graph Style dialog box, click to select the Use Left Axis, Use Right Axis, or Same Axis Both Sides option.

2 Click OK.

561

A B

1980 1990

Graph with left axis Graph with same axis both sides

562

Setting axis tick mark and label options

You can add tick marks to show units of measurement and to better delineate data series in a graph, and you can add information to labels including units of measurement such as “$.”

1980 1990

Tick marks with labels

Tick marks are the lines placed perpendicular to the axes to show the units of measurement. They can be used either horizontally or vertically or both to set categories apart in a line graph, for example, or to separate categories in a column or scatter graph.

563

There are three options to set horizontal

(y-axis) tick marks, and there is one option to set vertical (x-axis) tick marks, as described in the following procedures.

See Combining different graph styles for more information on changing axis attributes when a graph has more than one graph type.

To set horizontal tick mark and label options for either the left or right y axis:

1 In the Graph Style dialog box, click the Use Left Axis option or Use Right

Axis option. To apply the changes to both axes, also select the Same Axis

Both Sides option.

2 Click Left or Right to correspond to the axis you selected in step 1.

3 Click the Use Manual Axis Values option to manually calculate placement of the horizontal tick marks along the left or right y axis.

564

You can use this option, for example, to display very large numbers for the tick marks. Changing the y axes individually also lets you specify different options for the x and y axes or for the right and left y axes when you combine different graph types.

4 Either accept the values set when you created the graph or enter a minimum value, a maximum value, and the value between labels. To prevent numbers from appearing on an axis, enter 0 in the Value Between Labels text box. To have the axes start with a higher number and end with a lower number, enter a negative number in the Value Between

Labels text box.

5 Specify one or more of the following options:

• In the Labels Before/After text box, enter characters in either text box to add more information before or after the y-axis values, such as a dollar sign before a number, or the word units, or a percent sign after the values.

565

• To add horizontal tick marks to the graph, click either Short Tick Lines or

Full Width Tick Lines to extend tick lines across the graph.

• If desired, enter a value in the Draw

Tick Marks Per Tick Line to specify how many tick lines to draw.

6 Click OK, and then click OK again.

To place vertical tick marks on the x axis:

1 In the Graph Style dialog box, click

Bottom if you selected a scatter graph; if you selected another style graph, click Category.

2 Choose one or more of the following options:

• To add vertical tick marks to the graph, click either Short Tick Lines or

Full Width Tick Lines to extend tick lines across the graph.

• Click Draw Tick Lines Between Labels to draw tick lines on either side of the labels or columns, or deselect the option to center tick lines over the labels or columns.

566

• Enter a value in the Draw Tick Marks

Per Tick Line text box to specify how many tick lines to draw.

3 Click OK, and then click OK again.

1980 1990

Vertical tick lines added to graph

567

Adding a drop shadow to a graph

You can add drop shadows to give a graph a three-dimensional effect.

This option may not be appropriate for some graph styles, such as a line or scatter graph.

150

100

1980 1990

Drop shadows

To add a drop shadow:

1 In the Graph Style dialog box, select the Drop Shadow option.

2 Click OK.

568

Displaying legends across the top of a graph

By default, legends are displayed to the right of the graph. You can choose to display them horizontally across the top of the graph.

200

150

100

1980 1990

200

150

100

A B C

1980 1990

Default legends Legends across top

To display legends across the top of a graph:

1 In the Graph Style dialog box, select the Legends Across Top option.

2 Click OK.

569

Displaying overlapping columns of data

When using a graph such as a grouped column or area graph, you can control the order in which columns of data overlap.

1980 1990

First Column in Front option selected

To specify the order in which columns overlap:

1 Choose one of two options in the

Graph Style dialog box:

• Select the First Row in Front option to place the first row of data in the worksheet frontmost in the graph.

570

• Select the First Column in Front option (the default) to place the first column of data in the worksheet frontmost in the graph.

Always select this option for an area graph to prevent some areas from being hidden.

2 Click OK.

571

Changing graph styles

Once you have created a graph, you can change to another graph style to illustrate the data more effectively. To do so, you use the Graph Style dialog box.

To change the graph style of an individual series of data, you use the groupselection tool to select the data series.

Be sure to include the legend in the selection.

See also Combining different graph styles and Customizing a graph .

Note: Once graph objects are painted with gradients, changing graph styles causes unexpected results. To prevent undesirable results, use the direct-selection tool to select each object, and paint those objects with black; then reapply the original gradients.

To change graph types:

1 Select the graph.

2 Choose Object

Graphs

Style, or double-click the graph tool.

572

3 In the Graph Type section of the

Graph Style dialog box, select the type of graph you want.

4 Click OK.

5 Click to select the desired graph style

(type). The options for the particular type of graph you have selected appear to the right of the graph type. (The area graph does not have any options.)

6 Click to select the desired graph options .

573

Combining different graph styles

You can combine any type graph with another, with the exception of scatter graphs. Scatter graphs cannot be combined with any other graph type.

Price index

250%

A B

Retail Wholesale

200%

150%

100%

50%

1970 1980 1990

Retail price per unit

$25

$20

$15

$10

Grouped column and line graph styles combined

To combine different graph types in the same graph, you select parts of the graph using the group-selection tool.

You can select a data series by clicking one element of the series, such as the legend box, and then clicking again to select the entire group. You can then change the graph style in the Graph

Style dialog box.

574

If a graph uses more than one graph style, you can vary the graph style along the right and along the left axis so that each axis measures different data.

Note: You must select the entire graph to set the axis style.

If you combine a stacked column graph with other graph styles, be sure to use the same axis for all data series represented by the stacked column graph, to avoid overlapping columns or misleading column heights.

To combine different graph styles:

1 Use the group-selection tool to select a data series and its legend box or legend line.

2 Choose Object

Graphs

Styles, or double-click the graph tool.

3 Select the graph type and options you want.

4 Specify which axis to use for this series, and click OK.

575

Importing graph designs from other documents

You can create a custom startup file that contains the graph designs you use most frequently. The graph designs contained in the startup file then appear in the graph design list in the Graph

Design dialog box, and are available in every new Adobe Illustrator document you create.

See Creating a custom startup file .

576

Customizing a graph

You can customize a graph you have created by

• Changing the colors of shading

• Changing the typeface and type style

• Moving, reflecting, shearing, rotating, or scaling any or all of the graph

• Applying graph designs to a graph

• Importing graph designs from other documents

See also

• Selecting parts of a graph

• Creating a graph design

• Reusing a graph design

577

Selecting parts of a graph

Graphs are created as grouped objects.

You can select elements of a graph with the direct-selection and group-selection tools, and change the elements. However, if you ungroup the elements of a graph, such as individual columns of data, you will be unable to change the graph’s style or modify the graph’s data.

The elements of a graph are related. The entire graph with its legends is one group. All the data series are a subgroup of the graph; in turn, each data series with its legend box is a subgroup of all the data series. Each value is a subgroup of its data series, and so on. Never ungroup or regroup objects that are within the group.

You can see the hierarchy of grouping within a grouped column graph with two or more columns of data. The first column in the first cluster of columns is grouped with the first column in the next cluster of columns. In addition, the group of the first columns is grouped with the first legend.

578

If you want to select some objects in a graph and send them to the back or front of other objects, it’s important that you send only objects that represent an entire data series or individual numbers.

You can select individual columns, lines, pie wedges, or series, and move them to the front or back. Do not, however, select and send individual category labels, individual legend labels, individual axis tick lines, individual axis tick labels, or vertical or horizontal axis lines.

If you want to move a series in a line graph in front or in back of other series, you must select the entire series, including the legend. Selecting just the data points is not sufficient.

579

To select an entire path in a graph:

1 Select the group-selection tool .

2 Position the pointer on the legend of the columns you want to select

(for example, Group B), and click to select the legend.

1980 1990

First click selects a legend.

Second click adds columns to selection.

3 Without moving the group-selection tool pointer from the legend, click the mouse button. All of the columns grouped with the legend are selected.

You can also select a group by clicking one of its parts, clicking again to select columns grouped with it, and clicking a third time to select the legend.

580

Each click adds another layer of grouped objects to the selection, beginning with the next group up in the hierarchy. You can click as many times as the number of groups to add to a selection.

To deselect part of a selected group:

1 Select either the direct-selection tool or the group-selection tool , and position the tool on the object you want to deselect.

2 Hold down the Shift key, and click to deselect the object.

To change part of the type in a graph:

1 Select the group-selection tool .

2 Click once to select the baseline of the type you want to change; click twice to select all of the type.

3 Choose Type > Character or Type >

Paragraph.

4 Set the type attributes you want to change. Changes you make apply only to the selected type.

581

About graph designs

You can use custom designs in graph columns or markers to represent data.

Graph designs can be a simple drawing, logo, or other symbol representing values in a graph, such as a bicycle; or they can be complex objects that contain patterns, guide objects, and type. You can also use the designs in the Gallery folder included with the Adobe Illustrator program.

Graph designs are suitable for a grouped or stacked column graph, or for replacing markers in a line or scatter graph.

Graph designs are scaled so that the entire design fits within the column or marker. Once you use a design in a graph, you can select and modify the design.

You can use three types of graph designs with a column graph:

• Scaled graph designs .

• Repeating graph designs .

• Sliding graph designs , which are stretched or compressed with the columns.

582

See

• Creating a graph design

• Importing graph designs from other documents

• Applying graph designs to a graph

• Reusing a graph design

583

Scaled graph designs

A vertically scaled graph design is stretched or compressed vertically.

Its width does not change.

A uniformly scaled graph design is scaled both vertically and horizontally.

The horizontal spacing of the designs is not adjusted for the different widths.

300

200

100

300

200

100

1980 1990

Vertically scaled design

Uniformly scaled design

See Creating a graph design .

584

Repeating graph designs

A repeating design stacks a design to fill the columns. When you choose the

Repeating Design option in the Graph

Column Design dialog box, you assign a value to each design in the Each Design

Represents text box. You also choose whether to chop or scale designs that represent fractions. The Chop option cuts off a fraction of the top design as necessary; the Scale option scales the last design to fit in the column.

300

200

100

300

200

100

1980 1990

Repeating graph Repeating graph design: Chop option design: Scale option

See Creating a graph design .

585

Sliding graph designs

A sliding design is like a vertically scaled design except that you can specify where in the design to stretch or compress it. For example, if you were using a pencil to represent data, you might stretch or compress only the wooden part of the pencil, but not the point and the eraser. Using the Vertically Scaled option would scale the entire pencil.

300

200

100

1980 1990

Sliding graph design

You can also rotate the design in the legend box. By default, the design is rotated to appear horizontal in the legend box. You can turn this option off so that the design appears vertically in the legend box.

586

A A

Rotation on Rotation off

To create a sliding graph design:

1 Create a rectangle as the backmost object in the design.

2 Create the design using one of the drawing tools, or place an existing design in front of the rectangle.

3 Use the pen tool to draw a horizontal line to define where the design will be stretched or compressed.

4 Select all parts of the design including the horizontal line.

5 Choose Arrange

Group.

6 Use the direct-selection tool or groupselection tool to select the horizontal line. Be sure to select only the horizontal line.

587

7 Choose Object > Guides > Make.

8 Use the selection tool to select the whole design.

9 Choose Object > Guides > Lock to remove the check mark next to Lock so you can unlock the guides. Move the design around to make sure that the guide moves with the design.

10 Choose Object > Graphs > Design.

11 Click New. A small preview of the selected design is displayed.

12 Type a name for the design, and click OK.

13 To make the guide invisible when previewing the artwork, choose View >

Hide Guides.

14 Apply the design to a graph .

588

Creating a graph design

Creating a graph design is similar to creating a pattern . If you want to include column totals in the design, see Displaying column totals with graph designs .

When you create a new design or use a design in a document, the design is saved. You can use that design in another document by

• Opening the document in which you created the design

• Importing the design by Importing styles from other documents

• Reusing a graph design

To create a graph design:

1 Select the group-selection tool .

2 Position the group-selection tool on the smallest column or on a marker from the graph, and click to select it.

3 Choose Edit

Copy to copy, and Edit

> Paste to paste a copy of the column or marker into the graph; drag the copy to reposition it as needed.

589

Copying and pasting the column or marker first makes the column or marker rectangle the backmost object in the design. If necessary, choose Arrange

Send to Back to make the rectangle the backmost object in the design.

4 Paint the rectangle as desired, or fill and stroke it with None so that it is invisible.

5 Create the design using any of the drawing tools, or position an existing design in front of the rectangle.

6 To include column totals with the graph design, see Displaying column totals with graph designs .

7 Using the selection tool , select the entire design, including the rectangle and any type.

8 Choose Arrange

Group to group the design.

9 Choose Object

Graphs

Design.

10 Click New. A preview of the selected design appears.

590

Only the portion of the design that fits inside the backmost rectangle appears, but the whole design appears when used in the graph.

11 Name the design, and click OK.

12 Apply the design to a graph .

591

Displaying column totals with graph designs

You can include column totals with your graph design.

To display column totals with the graph design:

1 Follow steps 1 through 5 of the procedure in Creating a graph design .

2 Select the type tool . Position the pointer at a point where you want the value to appear, near or in the rectangle that defines the design.

For example, you can place the value in, above, below, to the left, or to the right of the design.

3 Click the mouse button, and type a percent sign (%) followed by two digits from 0 to 9. The digits control how the data is displayed.

592

The first digit determines how many places appear before the decimal point.

For example, if your total was 122, a digit of 3 would display 122. If you enter 0 for the first digit, the program adds the number of places necessary for the value.

The second digit determines how many places appear after the decimal point.

Zeros are added as necessary, and values are rounded up or down as necessary.

You can vary these numbers, depending on how many digits you need.

%30

%31

%32

0124.369

124

124.4

124.37

Column total designs

4 To change the type attributes, choose

Type > Character, specify the attributes you want, and close the palette.

593

5 To align the decimal points, choose

Type > Paragraph, and select the Right

Alignment option.

6 Using the selection tool , select the entire design, including the rectangle and any type.

7 Choose Arrange

Group to group the design.

8 Choose Object > Graphs > Design.

9 Click New. A preview of the selected design appears.

10 Name the design, and click OK.

11 Apply the design to a graph

300

200

100

180

250 240

280

1980 1990

Sliding graph design with data totals

594

Applying graph designs to a graph

You can apply a graph design that you have created or imported as a column in a column graph or as a marker in a line or scatter graph.

See also

• Reusing a graph design

• Creating a graph design

• Importing graph designs from other documents

To use a graph design in a column graph:

1 Use the group-selection tool to select the graph column or columns you want to fill with the design, or select the entire graph.

2 Choose Object

Graphs

Column.

3 Select a column design type.

See About graph designs for more information.

595

If you choose a repeating graph design , enter a value in the Each Design Represents text box for what each design represents. For example, if each design should represent 100 units, enter 100 in the Each Design Represents text box.

Also select whether to chop or scale any fractions of the design.

4 Select the design you want to use; a preview of the selected design appears.

5 Click OK.

To use a graph design as a marker in a line or scatter graph:

1 Use the direct-selection tool to select the markers and the legends in the graph that you want to replace with a design. Do not select any lines.

2 Choose Object > Graphs > Marker.

3 Click the On Data Point option; then click the design you want to use.

Click OK.

596

The design is scaled so that the backmost rectangle in the design is the same size as the default square marker on the line or scatter graph.

300

250

200

A B

150

5 10

Line graph with marker designs

15 20

597

Reusing a graph design

You may want to reuse a graph design that you have created and edit it to create a new design. If you have the original artwork, you can alter it and then rename the design using the Graph

Design dialog box. See Creating a graph design for more information.

If you don’t have the original artwork defined as a graph design, you can retrieve the original artwork by pasting the graph design into your artwork document.

To paste an existing graph design into your artwork:

1 Choose Edit > Select None to deselect all of the artwork.

2 Choose Object

Graphs

Design.

3 Select the graph design that you want to paste into your artwork, and click

Paste.

4 Click OK. The graph design is pasted into your artwork document. You can now edit it and define it as a new graph design.

598

Importing and Exporting

Artwork

About importing and exporting artwork

File formats supported in Adobe

Illustrator

Using the Clipboard to import and export artwork

Using the drag and drop feature to import and export artwork

Opening and placing artwork

Exporting artwork

Using the Publish and Subscribe commands

About vector graphics and bitmap images

About graphic file formats

599

About importing and exporting artwork

Illustrator can import and export many common graphic file formats, including

EPS, PICT, TIFF, PDF, and PostScript®. In addition to these common graphic file formats, Illustrator can use artwork in any file format supported by an Adobe

Photoshop-compatible file format plugin filter, including GIF, PhotoCD™, PIXAR,

Scitex CT®, and many more.

See

• File formats supported in Adobe

Illustrator

• About graphic file formats

• Using the Clipboard to import and export artwork

• Using the drag and drop feature to import and export artwork

• Opening and placing artwork

• Exporting artwork

See also The Read Me file installed with

Adobe Illustrator for a complete list of supported file formats.

600

File formats supported in Adobe Illustrator

File format

Import methods

Export methods

Considerations

TIFF

PostScript

(Level 1)

Open,

Place

Open

None

Clipboard;

Print-to-

File option

Illustrator opens or places only first page of a multipage file.

Opening or placing converts spot colors to process color and loses Overprint attribute.

EPS

PDF

PICT

Photoshop

2.5 and later

Open

Open,

Place

Open

Save As Opening or placing converts spot colors to process color and loses Overprint attribute.

Courier is used for missing fonts in opened or placed file when you print.

Save As

Drag and drop

Specify which page of file you want to use.

Clipboard Option-copy to Clipboard to copy artwork as

PICT objects

Copying via the Clipboard or dragging into a

Photoshop document rasterizes Illustrator artwork in Photoshop; hold down Command to prevent rasterization and maintain Illustrator paths (See Using the drag and drop feature to import and export artwork )

All formats supported by Photoshopcompatible format filters

Open,

Place (as in

Photoshop)

Save As

(as in

Photoshop)

See Read Me file for a complete list of supported formats; see Format pop-up menu in Save As dialog box for a list of Save As options.

When saving in bitmap image format, specify bit depth (See Using the drag and drop feature to import and export artwork ).

Using the Clipboard to import and export artwork

You can use the Clipboard as a limited method for transferring selections of artwork between an Illustrator document and another application. You can use the Clipboard to:

• Copy text between Adobe Illustrator and most word-processing and page layout applications.

• Copy selected paths between Adobe

Illustrator and Adobe Photoshop, Adobe

Streamline, Adobe Dimensions, or

Adobe Premiere. Paths are copied to the Clipboard as PostScript language descriptions, which you can then paste in the desired application.

• Copy artwork from Adobe Illustrator to the Clipboard as bitmap PICT images.

You can paste bitmap PICT images in most Macintosh applications.

602

To copy artwork as bitmap PICT images to the Clipboard:

1 Select the object or objects you want to copy.

2 Hold down the Option key and choose Edit > Copy.

603

Using the drag and drop feature to import and export artwork

The drag and drop feature lets you copy and move artwork by dragging a selection of artwork between an Illustrator document and another document, or the desktop. You can use the drag and drop feature in the following ways:

• You can drag and drop selections of artwork between Illustrator documents.

• You can drag and drop selections of artwork between Adobe Illustrator and the desktop. Selections are copied to the desktop as picture clippings, which can be dragged and dropped into the desired document.

You can drag and drop selections of artwork between Adobe Illustrator and

Adobe Photoshop. By default, selected objects are copied as bitmap images to the active layer. You can also copy selected paths from Illustrator to Photoshop by holding down the Command key.

604

• You can drag and drop selections of artwork between Adobe Illustrator and other applications that support the drag and drop feature, such as Scrapbook.

To drag and drop artwork to the center of a Photoshop document window:

1 Select the artwork you want to copy.

2 Open the document into which you want to copy the selection.

3 Begin dragging the selection; then hold down the Shift key, and continue dragging to the document window.

To drag and drop Illustrator paths as vector artwork into a Photoshop document:

1 Select the artwork you want to copy.

2 Open the Photoshop document into which you want to copy the selection.

3 Hold down the Command key, and drag the selection to the Photoshop document.

605

Opening and placing artwork

You can use the Open or Place commands to import artwork created by other applications.

See

• Opening files created by other applications

• Placing EPS files

• Placing non-EPS files created by other applications

See also

• Using the Publish and Subscribe commands

• Using the Clipboard to import and export artwork

• Using the drag and drop feature to import and export artwork

606

Opening files created by other applications

You can use the Open command to open a document created by another application, and create a new Adobe Illustrator document. Vector artwork in the document you open is converted to Illustrator paths, which can be modified using any Illustrator tool; bitmap images can be modified using transformation tools, such as scale and rotate, and using image filters, such as the Gallery

Effects™ (GE) filters in the Illustrator

Filter menu.

See also About vector graphics and bitmap images .

To open a file created by another application:

1 Choose File > Open.

2 Locate and select the file you want to open. If you don’t see the name of the file you want, the file is stored in a format that Illustrator cannot read. See the

Read Me file installed with Adobe Illustrator for a complete list of all the file formats you can open.

607

3 Click Open.

Note: If you open an EPS file that contains fonts not installed on your system, Courier is used for the missing fonts when you print.

608

Placing non-EPS files created by other applications

Using the Place command with images in file formats other than EPS includes a copy of the file copies in an existing

Adobe Illustrator document—just as if the file had been opened in Illustrator.

Vector artwork is converted to Illustrator paths; bitmap images can be modified using transformation tools and image filters.

Placing EPS files

When you use the Place command to insert an EPS image into existing Illustrator document, the Place command creates a link to an external file and does not include a copy of the file in the document.

Depending on how you save the Illustrator document, you can retain the link between the placed EPS file and its original application, or you can break the link and include the EPS file as an element in the Illustrator file . You can position the placed EPS image anywhere on the page, and you can apply transformation attributes, such as scaling, rotating, reflecting, and shearing; however, you cannot otherwise change the placed file.

To convert the elements in an EPS image to Illustrator objects that can be modified, use the Open command to open the EPS file; you can then modify the artwork in the new document or copy and paste the artwork into any existing

Illustrator document.

611

See also

• Opening files created by other applications

• Managing Adobe Illustrator documents containing placed EPS files.

• Placing non-EPS files created by other applications

To place an EPS file:

1 Open the Illustrator document into which you want to place the EPS file.

2 Choose File > Place EPS.

3 Locate and select the file to place, and click Place.

An outlined box containing two diagonal lines appears. This box defines the artwork’s dimensions. The box is placed into the center of the active window, in front of all other artwork in your document, and is selected.

If the placed EPS file was saved with a preview image, you can see it in Preview view. You can also choose to display a

1-bit preview image in Artwork view.

612

To turn on and off the display of EPS preview images in Artwork view:

1 Choose File > Document Setup.

2 Click the Show Placed EPS Images option, and click OK.

Artwork view; Artwork view with preview on

Preview view

613

When you make changes to a placed EPS image using the application that created it, the changes are automatically applied to the Illustrator documents that contain the placed file.

Note also that if you select a placed EPS image and then replace it with any other image, any transformation attributes, such as scaling, rotating, or shearing, are applied to the new place image.

To edit a placed EPS image:

1 Start the application that created the placed EPS file and open the file.

2 Edit the image. When you have finished, save the document as an EPS file.

Save the file with the same name and in the same location as the placed EPS file you want to replace.

The file is automatically updated in the

Illustrator document.

614

Managing Adobe Illustrator documents containing placed EPS files

You can display the location of an EPS file that you want to move or edit, and you can list the locations of all placed files in a given Illustrator document.

To determine the location of a placed file:

1 Select the placed artwork.

2 Choose Object > Attributes.

3 Use the Location of Placed Art pop-up menu to display the location of the placed image.

To determine the location of all placed

EPS files in an Illustrator document:

1 Make sure that no artwork is selected.

2 Choose Filter > Other > Document

Info.

3 Click Save.

4 Select a folder and name for the Document Info text file and click Save.

615

5 Open the Document Info text file with

TeachText or any word processing program. The Placed Art section lists the locations of all the placed EPS files.

Note: When you move an Illustrator document that contains placed EPS files, you must either move the original files, or find the placed files the next time you open the Illustrator document. If you plan to move a document that contains placed files, store the document and the original files in the same folder, and move the entire folder.

616

Including placed EPS files in Illustrator documents

By default, when you save a document that contains a placed EPS file, the placed file remains as a separate element that is linked to the Illustrator document. You can incorporate the placed file into the Illustrator document and break the link between the placed file and its original application.

To include placed EPS files in an

Illustrator document:

1 Open the Illustrator document containing placed EPS files.

2 Choose File > Save As.

3 Choose Illustrator EPS from the

Format pop-up menu, and click Save.

4 In the EPS Format menu, select the

Include Placed EPS Files option, and the preview and compatibility options.

5 Click OK.

The document is saved in Illustrator

EPS file format with the placed artwork included.

617

Exporting artwork

To use an Adobe Illustrator document in another application, you must save the document in a graphics file format that the other application can use.

You can save Illustrator documents in a number of graphic formats, including

EPS, PDF, and GIF. However, using a format other than EPS often results in a loss of quality. See About graphic file formats for more information.

Important: When saving an Illustrator file in a format other than Illustrator 6 or EPS, change the filename suffix to indicate the new format and thus ensure that the original file is not overwritten.

See

• Using the Clipboard to import and export artwork

• Using the drag and drop feature to import and export artwork

• Saving documents in previous versions of Adobe Illustrator

• Saving documents in EPS format

618

To save an Illustrator document in another format:

1 Choose File > Save As.

2 Select the folder where you want to save the file and rename the file or change the file suffix to reflect the new file format. Changing the filename ensures that your original artwork is preserved on disk.

3 Choose a file format from the Format pop-up menu.

4 Click Save. If you are saving the document in a bitmap format, you may be asked to choose a resolution and bit depth for the bitmap.

619

Saving documents in previous versions of Adobe Illustrator

Some applications can import Illustrator files directly without requiring that the files first be saved in a different format.

You might find, however, that these applications cannot import the current version of the Illustrator file format.

If you want to use the Windows version of the Illustrator program to change a document, for example, you must save the document in Illustrator 4 file format.

Note that many features new to a given version of Illustrator are not preserved when you save the document in a previous version. For example, when saving an Illustrator 6 document in Illustrator 4 format, gradient fills and layers are not preserved.

620

Saving documents in EPS format

The most common way of sharing Illustrator artwork is to save the artwork as an EPS file. Virtually all page layout, word processing, and graphic applications accept imported or placed EPS files. Unlike many other graphic file formats, EPS files preserve all of the graphic elements you can create with

Adobe Illustrator.

Illustrator documents saved as EPS files remain Illustrator documents. You can double-click an Illustrator EPS file to start Illustrator and open the document.

Most applications cannot display EPS artwork directly, but they can display a preview image saved as part of the EPS file. When working with other applications, you can use the preview image to locate and size the EPS artwork. See

Encapsulated PostScript (EPS) file format for a description of the preview options.

To save a document as an EPS file:

1 Choose File > Save As.

621

2 Select the folder where you want to save the EPS file and enter a name for the file.

3 Choose Illustrator EPS from the

Format pop-up menu, and click Save.

4 Choose from the following options:

• Select the kind of preview image you want to save with the EPS file.

• Select an Adobe Illustrator compatibility option. Keep in mind, however, that certain features, such as gradients and layers, are not supported by earlier versions of the Illustrator file format.

• If the Illustrator document contains placed EPS files and you do not want the files included in the Illustrator document, deselect the Include Place EPS files option.

• If you do not want to view a thumbnail of the EPS artwork in the Illustrator

Open dialog box, deselect the Include

Document Thumbnail option.

• If you plan to retrieve the EPS file using Adobe Fetch™, enter the Information field values.

5 Click OK.

622

Using the Publish and Subscribe commands

You can use Adobe Illustrator Publish and Subscribe commands to share and update material between documents.

Publish and Subscribe let you copy and update material from on e document to other documents. Once you’ve pasted published material into a document, the material can be updated automatically whenever the original file is modified.

(For a detailed description of Publish and Subscribe, see your Macintosh documentation.)

To use Publish and Subscribe, you first define the material that you want to be made available to other documents; this material is called a publisher. The material in the publisher is then saved as a separate file called an edition.

623

You can then open the document in which you want to insert the edition; this document is called a subscriber.

Each time you make changes to the published selection and save the changes, the artwork in the subscribing documents is updated. If you do not want updates to be sent automatically, you can send them manually using the options in the Publisher Options dialog box.

To publish artwork:

1 Using a selection tool, select the objects to be published.

2 Choose Edit > Publishing > Create

Publisher.

3 If necessary, select the file folder or disk drive on which you want to save the published document.

4 Select the file format in which you want to save your artwork, either PICT only, or PICT and EPS.

624

You can publish your artwork as a PICT file containing a PostScript language resource for printing or as a combination PICT and EPS file. If the file is being subscribed to by an application that is compatible with the EPS format, such as

Adobe Illustrator, save the file as PICT and EPS. If the subscribing application is not EPS compatible, save the file as

PICT only.

5 Type in a name for your artwork in the Name of New Edition text box. Click

Publish.

To update published artwork:

1 Choose Edit > Publishing > Publisher

Options.

2 Choose the edition you want to update from the Publisher pop-up menu.

3 Choose one of two update options:

• Choose On Save, the default option, to update the published artwork every time a change is saved using the Save or

Save As command.

625

• Choose Manual to update the edition only when you click the Update Edition

Now button.

4 Select the file format in which to update the edition, either PICT only, or

PICT and EPS.

5 Click OK.

To subscribe to published artwork:

1 Choose Edit > Publishing >

Subscribe To.

2 Select the edition to which you want to subscribe. A preview of the artwork is shown in the preview box.

3 Click Subscribe. The subscribed artwork appears in your document as if it were placed with the Place EPS command.

626

About vector graphics and bitmap images

Adobe Illustrator creates a type of graphics known as vector graphics. Vector graphics represent objects mathematically as straight lines, arcs, and other geometric shapes. Because vector graphics are represented mathematically, software can perform such operations as scaling and rotating without changing the quality of the artwork. The characters of PostScript language Level

1 fonts are also vector graphics.

Vector graphics

627

Paint and image-editing software, such as SuperPaint and Adobe Photoshop, generate a different type of electronic artwork known as bitmap images, also called raster images. Computer displays and printers are called raster devices because they present information with a raster, or grid of dots. The raster is a sequence of lines, and each line is a row of dots called pixels (picture elements).

Raster devices can be characterized by their resolution in dots-per-inch (dpi).

Many Macintosh monitors, for example, display information at 72 dpi, while most laser printers print information at

300 or 600 dpi.

Because vector artwork is represented mathematically as lines and curves, software must convert vector artwork to pixels to display the artwork on a monitor or to print the artwork on a printer.

Converting vector artwork to pixels is called rasterizing the artwork.

628

When software rasterizes vector artwork on the fly for display or printing, it uses the resolution of the display or printer. This means that higher resolution devices, which have more dots per inch than lower resolution devices, produce finer artwork. A small vector circle that appears rough and jagged on a

72-dpi monitor, for example, appears smooth when printed on a 600-dpi printer.

Vector artwork that is rasterized by scanning or by importing into a bitmap image program, on the other hand, is rasterized at a fixed resolution determined by the scanning software or by the bitmap image you are importing into. You can also convert vector artwork in Adobe Illustrator using the Rasterize command. (See Changing vector graphics into bitmap images ).

629

Bitmap artwork

See also

• Resolution and bit depth

• File size and image compression

630

Resolution and bit depth

Resolution is the measure of how many dots or pixels are in a given unit of measure. One way of expressing bitmap resolution is in pixels per inch (ppi).

Note: Many textbooks and manuals refer to image resolution in dots per inch (dpi). Used in the context of image resolution, dpi means the same thing as ppi.

Scanning, paint, and image-editing software determine the resolution of bitmap images. With scanning software, you select the resolution before scanning the image. Paint programs usually create bitmap images with a fixed resolution. The original MacPaint® program, for example, creates 72-ppi images.

With image-editing software, such as

Adobe Photoshop, you can change the resolution of images by either combining pixels to make larger pixels, or by dividing pixels into smaller pixels.

631

Bit depth is the number of bits used to describe each pixel in a bitmap. The bit depth describes the amount of color or grayscale information conveyed by a pixel. A black-and-white bitmap has a bit depth of one. Each pixel can be either 0 or 1, which correspond to black and white.

Grayscale images can have bit depths of either 4 or 8. A 4-bit grayscale image has 16 shades of gray; an 8-bit image has 256 shades of gray.

1-bit black-andwhite image

8-bit grayscale image

Color images can have bit depths of

4, 8, 16, and 24. A 4-bit color image has 16 colors, an 8-bit image has 256 colors, a 16-bit image has thousands of colors, and a 24-bit image has millions of colors.

632

Indexed-color bitmaps are 8-bit images that include a color table that defines a

24-bit color for each of 256 values that can be represented by an 8-bit value. An

8-bit image can thus use colors usually available only for 24-bit images. However, the indexed-color image is still limited to a total of only 256 colors.

633

File size and image compression

The storage required for bitmap images is the product of the image size, Resolution and bit depth . A 2-by-4-inch, 1200ppi, 24-bit color image, for example, requires more than 34 MB (megabytes) of storage, while the same image at

300-ppi requires about 2 MB.

Because bitmap images can require so much storage, many techniques have been developed for compressing image data to reduce storage requirements.

Compression techniques are distinguished by whether they remove detail from the image. Lossless techniques compress image data without removing detail; lossy techniques compress images by removing detail.

The following techniques are commonly used to compress bitmap image data:

• Run Length Encoding (RLE) is a lossless compression technique supported by the TIFF file format and some common Windows file formats.

634

• Lemple-Zif-Welch (LZW) is a lossless compression technique supported by

TIFF, PDF, and PostScript language file formats.

• Joint Photographic Experts Group

(JPEG) is a lossy compression technique supported by the PDF and PostScript language file formats.

• CCITT encoding is a family of lossless compression techniques for black-andwhite images that is supported by the

PDF and PostScript language file formats

(CCITT is an acronym for the French spelling of International Telegraph and

Telekeyed Consultive Committee).

635

About graphic file formats

Graphic file formats vary in how they represent graphic information. Graphic information can be represented as either vector drawings or as bitmap images . Some graphic file formats contain only vector drawings or only bitmap images, but many can include both in the same file. For more information, see File formats supported in Adobe

Illustrator and the Read Me file.

See

• TIFF file format

• PostScript language file format

• Encapsulated PostScript (EPS) file format

• PDF file format

• PICT file format

• PC Paintbrush file format (PCX)

• Windows bitmap file format (BMP)

• CompuServe Graphics Interchange

Format (GIF)

636

TIFF file format

TIFF is a flexible bitmap image format that is supported by virtually all paint, image-editing, and page-layout applications. Also, virtually all desktop scanners can produce TIFF images. Early versions of the TIFF format supported only uncompressed black-and-white images, but the most recent version supports up to 24-bit RGB, CMYK, and

YCbCr color images, and both the LZW and JPEG compression methods. The latest version also supports both the

LZW and JPEG compression methods.

The latest version also supports multipage images, although such images are rare.

637

PostScript language file format

PostScript is a page description language that is built into many desktop printers and virtually all high-end printing systems. Because it is built into so many printers, most Macintosh, Windows, and UNIX® application can create

PostScript files for printing.

PostScript files can describe a single page, but typically they represent entire documents.

The first version of the PostScript file format, PostScript Level 1, represents both grayscale vector graphics and grayscale bitmap images. The second version, PostScript Level 2, represents color as well as grayscale vector and bitmap images, and supports RGB,

CYMK, and CIE-based color models for both vector and bitmap graphics. (Some

PostScript Level 1 files also represent color with extensions to the PostScript language that were generalized in Post-

Script Level 2.)

638

PostScript Level 2 also supports a number of compression techniques for bitmap images, including the LZW, CCITT, and JPEG methods.

Illustrator does not save PostScript files directly, but if you are using a PostScript printer, you can use the Print-to-File option in the Print dialog box to create a PostScript file.

Note: Adobe recommends that you create PostScript files with the Apple

LaserWriter 8

or Adobe PostScript printer driver.

639

Encapsulated PostScript (EPS) file format

The Encapsulated PostScript file format is used to transfer PostScript language artwork between applications. Typically,

EPS files represent single illustrations or tables that are placed on a host page, but an EPS file can also represent a complete page.

Because they are based on the Post-

Script language, EPS files can contain both vector and bitmap graphics . Like

PostScript language files, early versions of EPS files contain only grayscale vector bitmap graphics, whereas later versions support color graphics and compressed bitmap images.

In addition to the PostScript language representation of the graphics to be placed, many EPS files contain a platform-specific preview bitmap representation of the graphic that an application can display. EPS files intended for use by

Macintosh applications, for example, contain PICT images for screen preview; those intended for use by Windows applications contain either TIFF or

Windows Metafile bitmap images.

640

Not all applications that create EPS files create preview images, however. When you place an EPS file without a preview image, Illustrator displays a box with an

X to represent the EPS artwork. When you place an EPS file with a TIFF or

Windows Metafile preview image, Illustrator also displays a box with an X for the EPS artwork. For more information on importing and exporting EPS files in

Illustrator see Placing EPS files and

Including placed EPS files in Illustrator documents .

641

PDF file format

PDF file format is the document format used by Adobe Acrobat

, Adobe’s electronic publishing software for Macintosh, Windows, UNIX

, and DOS. Acrobat

Reader software is included on your

Adobe Illustrator CD-ROM. See the

Getting Started guide and the online documentation in the Acrobat folder for more information on Adobe Acrobat.

Based on the PostScript Level 2 language, PDF can represent both vector and bitmap graphics in both color and grayscale. For the purposes of representing pages, PDF pages are identical to PostScript pages, but PDF files also contain electronic document search and navigation features. PDF files, for example, can contain hypertext links and an electronic table of contents.

Because Illustrator can open a PDF file, you can use the vector artwork or bitmap images from any PDF file in an

Illustrator document.

642

You can also use Illustrator to make changes to individual PDF pages. To modify a page within a PDF file, open the PDF file, select the page to modify, make changes, and save the modified

PDF file. The modified page is restored to its original position in the PDF file.

643

PICT file format

Together with the Encapsulated Post-

Script (EPS) file format , the PICT file format is the most common graphic interchange format for Macintosh applications. The first version of the

PICT format, PICT 1, represents blackand-white vector and bitmap images, but bitmap images have a fixed resolution of 72 dpi, which is the resolution of most Macintosh monitors.

The second and current version of the

PICT file format, PICT 2, supports color vector and bitmap graphics. PICT 2 bitmap images can have arbitrary resolutions and a bit depth of 1 or 8.

644

PC Paintbrush file format (PCX)

PCX is a bitmap image file format that is supported by many Windows applications. PCX supports the RLE compression method. Images can have a bit depth of 1, 4, 8, or 24.

Version 5 PCX files support a custom color palette, but version 3 PCX files do not.

645

Windows bitmap file format (BMP)

BMP is a bitmap image file format that is supported by many Windows applications. BMP supports the RLE compression method. Images can have a bit depth of 1, 4, 8, or 24.

646

CompuServe Graphics Interchange

Format (GIF)

The CompuServe

GIF format is a bitmap image file format that is used extensively on both the CompuServe network and the World Wide Web. GIF images can have a bit depth from 1 to 8. The GIF format supports LZW compression.

647

Printing Documents

Printing: an overview

Resolution and screen frequency basics

Printing artwork

Printing composites

Printing gradients and color blends

Improving printer performance

Compiling information about the document

Annotating objects

648

Printing: an overview

When you print a document, the Adobe

Illustrator program sends it to a printing device, either to be printed directly onto paper or to be converted to a positive or negative image on film. In the latter case, the film can then be used to create a master plate for printing by a mechanical press.

The simplest types of images, such as a page of text, use only one color in one level of gray. A more complex image is one whose color tones vary within the image. This type of image is known as a continuous-tone image. A placed image, such as a scanned photograph, is an example of a continuous-tone image.

To create the illusion of a continuous tone, the image is broken down into a series of dots. This process is called

halftoning. Varying the size and density of the dots in a halftone screen creates the optical illusion of variations of gray or continuous color in the image.

649

For artwork that will be commercially reproduced and that contains more than a single color, you must print the artwork on separate master plates, one for each color. This process is called color separation .

Image printed as composite on color laser printer, and as four-color separation on imagesetter

See

• Resolution and screen frequency basics

• Printing artwork

• Printing gradients and color blends

• Improving printer performance

650

• Compiling information about the document

• Annotating objects

• Aligning the artboard with the printed page

• About separations

See also the Adobe Print Publishing

Guide, included in your Adobe Illustrator software package

651

Resolution and screen frequency basics

The detail in a printed image results from both the resolution and Screen frequency . The higher an output device’s resolution, the finer (higher) a screen frequency or screen ruling you can use.

Resolution is the number of dots or pixels per linear unit used to reproduce artwork and images. Computer-based graphics display images as groups of dots called pixels. The resolution of vector graphics, such as Illustrator line art, depends on the device used to display the artwork. The resolution of bitmap images, such as digital photographs, depends on both the display device and the inherent resolution of the bitmap image. Four kinds of resolution affect artwork in Illustrator documents:

See

• Monitor resolution

• Printer resolution

• Image resolution

• Bit resolution

652

Monitor resolution

Of all the forms of output devices, monitors usually have the lowest resolution—typically in the range of 70 dpi to

96dpi. The typical Macintosh monitor, for example, has a resolution of 72 dpi; a typical PC-compatible monitor has a resolution of 96 dpi.

653

Printer resolution

Inkjet printers have the lowest resolution printed output and usually print in the range of 180 dpi to 360 dpi. Laser printers occupy the middle range, usually with a resolution of 300 dpi to 600 dpi. At the top of the range are imagesetters, which can produce output from

1200 dpi to 5000 dpi.

654

Image resolution

Raster images are saved as groups of pixels at a fixed resolution. In contrast, vector drawings are saved as mathematical expressions, and display at the resolution available to the output device.

The image resolution refers to the spacing of pixels in the raster image, and is measured in pixels per inch (ppi).

See Bitmap images and About vector graphics and bitmap images .

Note: The Document Info dialog box enables you to define the output resolution for vector drawings. In Illustrator, output resolution refers to the number of line segments the PostScript interpreter uses to approximate a curve. For more information, see Changing the output resolution .

655

Bit resolution

Also known as pixel depth, bit resolution determines the number of colors available to pixels in a raster image. For example, a pixel with a bit resolution of

1 has 2

, or two, possible values: on and off. A pixel with a bit resolution of 8 has

, or 256, possible values. Common bit resolutions range from 1 to 24 bits per pixel.

See Bitmap images and About vector graphics and bitmap images .

656

Screen frequency

Although separate from resolution ,

screen frequency also affects the sharpness of a printed image. Also known as

screen ruling, screen frequency refers to the number of halftone cells per inch in the halftone (or line) screen used to print a grayscale image or color separation. The line screen arranges the image in each separation into rows of halftone dots for printing. The frequency of these rows of dots is described in lines per inch, or lpi.

A low lpi setting (e.g., 65 lpi) creates a coarse screen that produces large, wellseparated dots. This is useful for printing newspapers, for example, because that kind of paper absorbs ink quickly, and the dots tend to spread.

A high lpi setting (e.g., 177 lpi) produces many small dots, which is useful for printing fine shadings and detailed images, such as those found in art books and magazines. The appropriate line screen setting depends on the resolution of the printer, and on the type of paper, press, and inks that will be used to print the artwork.

657

Printing artwork

For any type of artwork you print, you can choose from a set of standard printing options in the Page Setup dialog box. You can then print the artwork using the Print dialog box.

See

• Setting crop marks

• Setting trim marks

See also

• Printing composites

• Printing gradients and color blends

• Improving printer performance

To select printing options:

1 Choose File > Page Setup.

This dialog box varies depending on the selected printer. The top half of the Page

Setup dialog box contains the standard

Macintosh printing options for paper type, printer effects, reduction and enlargement, and orientation.

658

2 Choose any of the printing options, as described in your Macintosh system documentation.

3 Choose one of the following options:

• Click OK.

• Click Options to choose from another group of printer settings that are available on the selected printer. (See your

Macintosh documentation for information on these options.) Choose the options you want; then click OK to return to the Page Setup Dialog box, and click OK again.

To print a document:

1 Choose File > Print.

2 Indicate which pages you want printed.

659

The number of pages that print is determined by the View options selected in the Document Setup dialog box . If the

Single Full Page option in the Document

Setup dialog box is selected, only one page will print. If any other View option is selected, you can print a specified page or range of pages by clicking the

From option and entering the beginning and ending page numbers to be printed in the appropriate text boxes.

3 If your printer driver and printer supports PostScript Level 2, you can select the Level 2 option, which enables Illustrator to print complex patterns in artwork. See Additional tips for efficient printing , and PostScript language file format .

4 Click Print. By default, Adobe Illustrator prints all visible layers. To print an individual layer, see Making selected layers nonprintable .

660

Printing composites

If you are making color separations, you may want to print a color or grayscale composite proof to check your work or to send to the print shop with each set of separations. A composite image can help you design and proof your artwork and check your separation setup before printing final (and costly) separations.

When Illustrator prints a composite, it prints all of the colors used in the file, regardless of whether any are selected, with all of the printer’s marks in place.

Any overprinting specified in the artwork won’t appear on the composite from most printers. Also, as with color monitors, color printers vary greatly in color reproduction quality; thus, composites from a color printer never substitute for proofs made by the print shop.

661

To create a composite:

1 Choose File > Print.

2 Choose Normal from the Output pop-up menu.

3 Choose any other printing options.

See Printing artwork for more information.

4 Click Print.

662

Setting crop marks

Crop marks define where your artwork will be trimmed after it is printed. You can create crop marks using the Make

Cropmarks command to place them directly into the artwork, or from the

Separation Setup dialog box to place them in separations.

Only one set of crop marks can appear in a document. If you need multiple marks—for example, if you are printing multiple pages from the same document—use trim marks instead.

Image with crop marks

663

If you plan to separate a color Illustrator document, you should first set crop marks in the artwork. You can reposition the crop marks later either by deleting the first set of crop marks and then setting new crop marks, or by using the

Separation Setup dialog box to change the existing crop marks.

See also Step 5: Place crop marks around the image to be separated .

To set crop marks directly in artwork:

1 Draw a rectangle to define the boundaries of where you want the crop marks to appear.

2 Select the rectangle.

3 Choose Object > Cropmarks > Make.

This command is available only when a rectangle is selected. Crop marks replace the selected rectangle.

Once you set crop marks, you cannot select them. You can, however, release them using the Release Cropmarks command. You can also set new crop marks without releasing the old ones; the new crop marks replace the old ones.

664

Note: If you have selected the Single Full

Page option in the Document Setup dialog box , you can use the Make Cropmarks command without first creating and selecting a rectangle to define the boundaries of the crop marks. The crop marks are set at the outer corners of the page.

To eliminate crop marks:

Choose Object > Cropmarks > Release.

The original rectangle reappears to define the bounding area of your artwork.

665

Setting trim marks

Like crop marks, trim marks also define where a printed image should be trimmed. You cannot create more than one set of crop marks in a file; however, you can create multiple trim marks inside your artwork using the Trim Marks filter.

The Trim Marks filter creates trim marks based on an imaginary rectangle drawn around the imageable area of the object.

Image with multiple trim marks

666

Illustrator does not recognize trim marks created with the Trim Marks filter as special objects when creating color separations. As a result, trim marks do not affect the bounding box, or printable image area, around the artwork.

Trim marks are useful, therefore, when you want to create several sets of crop marks around objects on a page—for example, when you are creating a sheet of business cards to be printed.

Trim marks created with the Trim Marks filter do not replace crop marks created with the Separation Setup dialog box or

Make Cropmarks command .

To create trim marks around an object:

Select the object, and choose Filter

Create

Trim Marks.

667

Printing gradients and color blends

Documents with gradients and color blends can be difficult for some printers to print smoothly (without discrete bands of color) or at all.

Banding in a blend

Follow these general guidelines to help avoid banding:

• Use an appropriate line screen that retains 256 levels of gray; see Ensuring your resolution/line screen produces

256 grays .

• Use a blend that changes at least 50% between two or more process color components.

668

• Use shorter blends. The optimum length depends on the colors in your blend, but try to keep blends shorter than 7.5 inches. For more information, see Calculating the maximum blend length based on the color change .

• Use lighter colors or make dark blends short. Banding is most likely to occur between very dark colors and white.

See also

• Printing gradients with Adobe

Photoshop, Adobe Dimensions, and older versions of Adobe Illustrator

• Improving gradient printing with the Compatible Gradient Printing option

• Improving gradient printing on lowresolution printers

669

Ensuring your resolution/line screen produces 256 grays

In printing your document, you may find that the resolution of your printer, when combined with the chosen line screen, allows fewer than 256 levels of gray. A higher screen frequency decreases the levels of gray available to the printer.

(For example, if you are printing at a resolution of 2400 dpi, using a line screen higher than 150 will result in fewer than

256 levels of gray.)

670

This table lists the maximum line screen you can use with a printer to maintain all 256 levels of gray.

Final

Imagesetter

Resolution

300

400

600

900

1000

1270

1446

1524

1693

2000

2400

2540

3000

3252

3600

4000

Maximum

Line Screen to Use

106

125

150

159

188

203

225

250

671

Calculating the maximum blend length based on the color change

Adobe Illustrator calculates the number of steps in a gradient based on the percentage of change between the colors in the gradient. The number of steps, in turn, determines the maximum length of the blend before banding occurs.

The gradient’s number of steps and maximum length assume that you are printing the document with a line screen and resolution that produce 256 levels of gray .

To determine the maximum blend length based on the color change:

1 Select the measure tool and click the beginning point and the endpoint of the gradient.

2 Note the distance displayed in the

Info palette on a separate piece of paper.

This distance represents the length of the gradient or color blend.

672

3 Calculate the number of steps in the blend, using this formula:

Number of steps = Number of grays

Percent change in color

To figure out the percent change in color, subtract the lower color value from the higher color value. For example, a blend between 20% black and

100% black is an 80%—or 0.8—change in color.

When blending process colors, use the largest change between the colors. For instance, a blend from 20% cyan, 30% magenta, 80% yellow, and 60% black to

20% cyan, 90% magenta, 70% yellow, and 40% black indicates a 60% change, because the greatest change occurs in magenta, from 30% to 90%.

4 Using the number of steps calculated in step 3, see if the length of the gradient is larger than that indicated in the chart. If it is, reduce the length of the gradient or change the colors.

jump to art

673

Calculating the number of steps in a blend

Number of Steps

Adobe Illustrator

Recommends

160

170

180

190

200

210

220

230

240

250

256

100

110

120

130

140

150

Maximum Blend Length

Points

345.6

367.2

388.8

410.4

432.0

453.6

475.2

496.8

518.4

540.0

553.0

21.6

43.2

64.8

86.4

108.0

129.6

151.2

172.8

194.4

216.0

237.6

259.2

280.8

302.4

324.0

Inches

4.8

5.1

5.4

5.7

6.0

6.3

6.6

6.9

7.2

7.5

7.7

2.4

2.7

3.0

3.3

3.6

3.9

4.2

4.5

1.2

1.5

1.8

2.1

CMS

12.192

12.954

13.716

14.478

15.240

16.002

16.764

17.526

18.288

19.050

19.507

.762

1.524

2.286

3.048

3.810

4.572

5.334

6.096

6.858

7.620

8.382

9.144

9.906

10.668

11.430

return to text

Printing gradients with Adobe

Photoshop, Adobe Dimensions, and older versions of Adobe Illustrator

Adobe Photoshop 2.5, Adobe Dimensions 1.0, and versions of Adobe Illustrator earlier than 5.0 cannot read the multicolored gradients in Illustrator 5.0,

5.5, and 6.0. If you want to use gradients in Photoshop or in an earlier version of Illustrator, save the file in Illustrator 3.0 format.

Saving documents in previous versions of Adobe Illustrator converts the new gradients to artwork (similar to blends created in Adobe Illustrator 3.0) and results in the loss of other Adobe

Illustrator 5.5 features. Be sure to first save the original file in Adobe Illustrator

6 format under a different name.

675

Improving gradient printing with the

Compatible Gradient Printing option

Some older Level 1 imagesetters have difficulty printing gradients. For example, these imagesetters may take excessively long to print files with gradients, or may print not print such files at all.

The Compatible Gradient Printing option enables such imagesetters to print your files.

Note: Use this option only with files that contain gradients and that will be printed on imagesetters that have difficulty printing such files. This option can slow printing on printers that don’t have problems with gradients.

To improve gradient printing:

1 Choose File

Document Setup.

2 Select the Compatible Gradient

Printing option. Click OK.

676

Improving gradient printing on low-resolution printers

Illustrator automatically turns off the printer’s default screens and uses Adobe

Screens to enhance the output of gradients when printing to low-resolution printers (600 dpi and less) that support fewer than 256 gray levels. However, you may want to use the printer’s default screen if your low-resolution printer uses special screening, such as stochastic screening.

To use the printer’s default screens with low-resolution printers:

1 Choose File > Document Setup.

2 Select the Use Printer’s Default

Screens option. Click OK.

677

Improving printer performance

Objects that contain overly complex paths are one of the main causes of printing problems. A path’s complexity is determined by the number of line segments and anchor points it contains.

The more complex the path, the longer it takes to print. Before printing, make sure that the paths contain only the necessary anchor points.

You can simplify paths by:

• Drawing with the pen tool instead of the freehand tool, when possible. Drawings made with the pen tool typically contain fewer points than those created with the freehand tool.

• Removing unnecessary points. See

Adding and deleting anchor points for more information.

• Deleting stray points. See Selecting stray points for more information.

• Splitting paths to print large, complex shapes .

• Changing the output resolution .

678

• Increasing the flatness of curves. See

Creating a printer override (Riders) file for more information.

See also

• Additional tips for efficient printing

• The ReadMe file installed in the Adobe

Illustrator folder

679

Splitting paths to print large, complex shapes

If you are printing Adobe Illustrator documents containing overly long or complicated paths, the document may not print, and you may receive limitcheck error messages from your printer.

To simplify paths, you can split long, complex paths into two or more separate paths using the Split Long Paths option in the Document Setup dialog box .

When the Split Long Paths option is selected, the Adobe Illustrator program checks whether the path is too long to print whenever you save or print an image.

If the path length exceeds what the printer’s memory can handle, Illustrator breaks the path into pieces represented on-screen by lines through the path.

These lines appear only in Artwork view; they do not preview or print. The image previews and prints as if the paths were joined.

680

Complex object, and Split Long Paths option applied

It is a good idea to save a copy of your original artwork before splitting paths.

That way, you will still have the original, unsplit document to work with if needed.

Keep in mind that Illustrator treats split paths in the artwork as separate objects. To change your artwork once paths have been split, you must either work with the separate shapes or rejoin the paths to work with the image as a single shape.

The Split Long Paths option does not affect stroked paths, compound paths, or masks.

681

To split long paths:

1 Choose File

Document Setup.

2 Select the Split Long Paths option, and click OK. Illustrator will split paths as needed when you print or save the file.

To split a stroked path:

Split the path with the scissors tool .

To split a compound path:

1 Choose Object > Compound Paths >

Release to remove the compound path.

2 Break the path into pieces using the scissors tool .

3 Redefine the pieces as compound paths.

To split a mask:

1 Choose Object

Mask

Release to remove the mask.

2 Break the path into pieces using the scissors tool .

3 Redefine the pieces as masks.

682

To rejoin a split path:

1 Delete any extra lines created by the

Split Long Paths option by selecting the lines and pressing the Delete key.

2 Select all of the split paths that made up the original object.

3 Choose Filter > Pathfinder > Unite.

The path is rejoined, with anchor points placed at each intersection where a split path was reconnected.

683

Changing the output resolution

Curves in artwork are defined by the

PostScript interpreter as small line segments—the smaller the line segments, the more accurate the curve. However, when small line segments are used to draw a curve, the total number of line segments increases, thereby increasing the complexity of the curve. If a curve is too complex for a PostScript interpreter to rasterize, a PostScript error can result, and the curve won’t print.

The output resolution determines the flatness of the curve: a lower output resolution results in greater flatness, and thus longer and fewer line segments.

This creates a less accurate curve, but improves printing performance.

Adobe Illustrator prints fastest and best by using a default output resolution setting of 800 dots per inch (dpi). However, in some cases you might want to decrease the output resolution—such as if you draw a very long curved path that won’t print due to a limitcheck error; if printing is slow; or if objects are not being printed at an adequate resolution.

684

You can also change the output resolution of future objects you create (without affecting existing objects) with the

Document Setup dialog box .

Note: You can also change the flatness of an object. See Creating a printer override (Riders) file for more information.

To change the output resolution for an object:

1 Select the object for which you want to adjust the output resolution.

2 Choose Object

Attributes.

3 Enter the output resolution for the object. (Recommended values are between 100 dpi and 300 dpi for printing at 300 dpi, and between 240 dpi and

300 dpi for printing at 2400 dpi. The limits are between 100 and 9600 dpi.)

4 Click OK.

685

Additional tips for efficient printing

You may not be able to print an image, an image may take a long time to print, or your printer may simply quit with or without issuing an error message. Error messages include a rangecheck error or a VMerror (virtual memory error). Many of these errors are caused by overly complex paths in your artwork.

If your image takes a long time to print, consider simplifying its shape. Other tips that will help you print more efficiently include the following:

• Limit the complexity of patterns, masks, and compound paths you use in the artwork file. Delete unused patterns from the Paint Style palette.

When filling objects with patterns, note that patterns can significantly slow performance. Filling compound paths with patterns or using several patterns in your artwork may slow printing or cause your document not to print at all.

686

In addition, anything stroked with patterns using the Paint Style palette

(rather than using the Path Patterns filter) other than very simple paths do not print unless you set the document for

PostScript Level 2 printing. See Printing artwork for more information.

See also

• Working with masks

• Working with compound paths

• Creating and working with patterns

• Deleting patterns

• If the artwork contains ink pen effects, gradients, or patterns that are too complex to print on the current printer, you can print it on a PostScript

Level 2 imagesetter instead. You can also copy the file and rasterize the nonprinting artwork; see Changing vector graphics into bitmap images for more information.

• Use the same version of Adobe

Illustrator to print documents that were used to create them.

687

Illustrator 6.0 contains various printing enhancements and new text features.

Opening or printing an Illustrator document using version 5.01 or earlier will strip many of these enhancements from the document and will reflow any tabbed text. Make sure that you or your service bureau uses Adobe Illustrator

6.0 to print 6.0 documents.

To retain 6.0 printing and text enhancements when your service bureau does not have version 6.0, use Adobe Illustrator 6.0 to save a copy of the 6.0 document in EPS format so that it can be placed in an earlier version of Adobe

Illustrator or in another desktop publishing program; see Saving documents in EPS format . You will not lose any of the printing enhancements or tabs in the document when you do this. For more information on tabs, see

Using the Tab Ruler palette .

• Limit the number of downloadable typefaces you use in the artwork file.

688

Creating a printer override

(Riders) file

The Make Riders filter creates an Adobe

Illustrator EPSF Riders file. The Riders file is PostScript code that, when added to an Adobe Illustrator document, overrides how a document prints. The

Delete Riders filter removes Riders files from your system.

A Riders file is used to set the screen frequency, angle, spot function, and flatness for all documents, or to add an annotation or an error handler message to all documents. A Riders file overrides any settings you may have specified using the Color Separation Setup dialog box.

To create a Riders file, you must first move the Riders plug-in from the

Riders folder in the Utilities folder, move it to the Plug-ins folder, and restart Illustrator.

689

Once the Riders plug-in is in your Plugins folder, it affects all files that are saved as EPS files or printed from Illustrator. To remove the Riders information from your files, remove the Adobe

Illustrator EPSF Riders files, and resave all documents that contain embedded

Riders information.

To make an EPSF Riders file:

1 Choose Filters > Other > Make Riders.

2 Select options from the six pop-up menus:

• Choose a screen frequency, or line

screen, to designate the number of rows of halftone dots per inch when printing.

The screen frequency value must be between 1 and 999.

• Choose a screen angle to determine the angle at which the rows of halftone dots will be printed. (The default setting for black-and-white printing is 45 degrees, to make the dot rows less conspicuous to the eye.) The screen angle value must be between

0 and 360.

690

• Choose a spot function to determine the halftone dot’s shape. Choose Import from the Spot Function pop-up menu to select and import a spot function.

Warning: An imported spot function must be in PostScript language, correctly formatted. Importing an incorrectly formatted spot function can corrupt a document or make it unprintable. For more information, see the Spot Function Template file in the Utilities/Riders folder.

• Choose a flatness setting to determine how accurately the PostScript interpreter draws curves. The Riders

Flatness setting must be between 0.2 and 200, and is applied to all curves in an Illustrator document.

You can also set the flatness of an individual object by Changing the output resolution setting using the Attributes command. The Riders Flatness setting overrides any Output Resolution setting. In most cases, you should use

Output Resolution instead of the

Rider filter’s flatness setting.

691

If a curve is extremely complex, and you don’t want to lose any of the curve’s quality, you can use the Split Long Paths option .

• Enter an annotation of up to 254 characters by selecting Setup from the Annotation pop-up menu. When the Annotation dialog box appears, select the font and type size from the pop-up menus, and type the annotation. The annotation will appear at the bottom left corner of the printed page.

• Choose the Error Handler option to print error information on the page if a

PostScript error occurs. If you are using the Adobe PSPrinter or the LaserWriter

8.0 or later printer driver, turn on the printer driver’s error handling instead of using the Riders error handler.

3 When you have selected the options you want, click Make.

4 Save the file in the Plug-ins folder.

692

To delete a Riders file:

1 Choose Filter

Other

Delete Rider.

2 Select the Riders file you want to delete. This file is called Adobe Illustrator EPSF Riders.

3 Click Delete.

693

Compiling information about the document

The Document Info command lists general document information and object characteristics, as well as the number and names of custom colors, patterns, gradients, fonts, and placed art.

To view document information using the Document Info command:

1 Select an object with a selection tool, or if you want information on all objects, deselect all objects by choosing

Edit

Select None.

If you have selected one or more objects, the Document Info command lists information only for the selected objects, and the dialog box that appears is titled Selection Info instead of Document Info.

2 Choose File

Document Info.

694

3 Choose from the seven information screens listed in the Info pop-up menu:

• Document lists the document name and settings in the Document Setup dialog box . This information screen is available only if you haven’t selected any objects.

• Objects lists the number of paths, masks, compound paths, custom colors, patterns, gradients, fonts, and placed art contained in the selected artwork.

• Custom Colors lists the names of any custom colors in the selected artwork.

• Patterns lists the names of any patterns in the selected artwork.

• Gradients lists the names and types of gradients in the selected artwork.

• Fonts lists font names and font styles in the selected artwork.

• Placed Art lists the name and path of any placed art in the selected artwork.

4 To save a copy of the document information as a text file, click Save.

695

Annotating objects

You can use the Note text box in the

Attributes dialog box to annotate an object so that it can easily be located in the PostScript file with a text editor. This feature can help service bureaus or other professionals trying to troubleshoot printing problems.

To annotate an object:

1 Select the object you want to annotate.

2 Choose Object

Attributes.

3 In the Note text box, type the annotation. You can enter up to 240 characters.

For example, you can enter a short description of the object, the date it was created, and the name of the creator of the artwork.

696

4 Click OK. The annotation is associated with the object.

When you save the artwork, the object is annotated in the PostScript language program with your annotation preceded by the text string %AI3_Note .

697

Producing Color

Separations

About separations

CMYK output

Spot color output

Step 1: Calibrate your color monitor

Step 2: Check colors in your artwork

Step 3: Select overprint options for colors you want to appear transparent

Step 4: Create a trap to compensate for misregistration on press

Step 5: Place crop marks around the image to be separated

Step 6: Set separation options

Step 7: Print and save separations

698

About separations

Artwork can consist of custom (spot) colors, process colors, or both. When you separate artwork containing custom colors, a separate plate is created for each custom color that contains only objects of that specific color. When you separate artwork that contains process colors, each color is separated into from one to four plates, depending on the mixture of cyan, magenta, yellow, and black portions in the image.

jump to art

You can also convert custom colors to process colors and vice versa at the separation stage. When inked with the appropriate color and printed in register with each other, these colors combine to reproduce the original artwork. See

CMYK output and Spot color output .

699

The process of dividing the image into two or more colors is called color

separating, and the films from which the plates are created are called the

separations.

You can print a color or grayscale composite proof to check your work or send to the print shop with each set of separations. You should work closely with the print shop that will produce your separations, consulting its experts before beginning each job and during the process.

Producing a color separation in Adobe

Illustrator requires five basic and two optional steps:

• Step 1: Calibrate your color monitor

• Step 2: Check colors in your artwork

• Step 3: Select overprint options for colors you want to appear transparent

• Step 4: Create a trap to compensate for misregistration on press

• Step 5: Place crop marks around the image to be separated

• Step 6: Set separation options

700

• Step 7: Print and save separations

See also

The Adobe Print Publishing Guide for more information on the basics of printing, including line screens, resolution, process colors, and spot colors.

701

CMYK output

Artwork is separated into CMYK output when you’re preparing an image to be printed using the process colors cyan

(C), magenta (M), yellow (Y), and black

(K). (The letter K is used for black to avoid confusion, because B might also stand for blue.) jump to art

702

Spot color output

You can use custom inks to create spot

colors (also called custom colors), in addition to or in place of process colors.

Because a spot color is printed using a single plate, spot colors can often reduce the complexity and cost of printing artwork. jump to art

For example, instead of using the four process colors to reproduce artwork consisting of black text and bluishgreen line drawings, you could use two spot colors—one of black and one representing that exact shade of green. In addition, you can use custom color inks to produce colors not reproducible by

CMYK inks, such as fluorescent and metallic colors.

You can use the Paint Style palette to display the CMYK equivalent of a spot color.

703

To view the process color equivalent of a spot color:

1 Select the Custom color selection option at the top of the Paint Style palette.

2 Double-click the spot color whose process color equivalent you want to view.

3 The CMYK values for the spot color appear in the Custom Color dialog box.

4 Click Cancel.

704

Separating custom and process colors

Process colors:

Custom color is converted to process color equivalent and printed as part of process color plates.

Process plus custom color:

Custom color is printed on a separate plate.

Options set in Color Separation dialog box.

Step 1: Calibrate your color monitor

To produce a full spectrum of color, video monitors mix the three basic colors of light—red, green, and blue

(or RGB)—whereas, the printed page mixes the four basic ink colors (or process colors) of cyan, magenta, yellow, and black (CMYK). Because RGB devices can produce colors not reproducible using CMYK inks, color in your printed artwork may look very different from color in the artwork on-screen.

Calibration enables you to adjust the monitor to match the printed output more accurately.

See

• About color models

• Calibrating your monitor

706

About color models

Most of the visible spectrum can be represented using different color models based on different sets of primary colors.

• RGB. Devices that project light, such as a computer monitor, represent the range of colors in the visible spectrum by controlling the intensities of the primary colors red, green, and blue

(RGB). Adding these colors equally creates white light, while subtracting them all leaves black.

Magenta

Red

Yellow

Green

Additive colors (RGB)

Blue

Cyan

707

• CMYK. On printed material, combining the four inks cyan (C), magenta (M), yellow (Y), and black (K) in different intensities represents the colors in the visible spectrum. In theory, adding the primary colors cyan, magenta, and yellow together produces black, and subtracting them leaves white. However, because all printing inks contain some impurities, combining these three inks actually produces a muddy brown. Black ink is used to produce a true black.

Blue

Magenta

Red

Cyan

Green

Yellow

Subtractive color (CMYK)

708

The gamut of a color system is the range of colors that can be displayed or printed. The widest gamut is in the visible spectrum, which contains all the colors visible to the human eye.

The RGB gamut and CMYK gamut are subsets of the visible spectrum.

As shown in the following illustration, the CMYK gamut is smaller than the RGB gamut. This means that some colors that appear on the monitor, such as fluorescent colors, cannot be reproduced by CMYK inks.

Visible color gamut

RGB color gamut

CMYK color gamut

Color gamuts

709

Calibrating your monitor

You can achieve the most accurate color calibration on a 24-bit monitor. Monitors that have a lower bit display dither many colors—that is, simulate them by mixing the existing colors—and thus can only approximate a broader spectrum of color.

Before you calibrate your color monitor, get a sample progressive color bar from your print shop. A color bar displays the process colors and combinations of color, including a four-color black.

To calibrate your color monitor:

1 Start the Adobe Illustrator program.

2 Choose File

Preferences

Color

Matching. The Color Matching dialog box appears, showing the colors and color combinations that appear on a printed progressive color bar.

710

3 If you are using Adobe Photoshop with Adobe Illustrator, choose the CIE calibration option, and then choose from the following options:

• Choose an option from the Ink pop-up menu that matches the ink set and color printer you are using. The default option is designed to produce quality separations using SWOP (standard web offset proofing) inks on coated paper. These inks differ slightly from those used in

Europe, as well as from the pigments used in color wax transfer printers, such as the QMS® ColorScript printer.

If your printer is not listed, contact your printer manufacturer to find out whether a set of Adobe Illustrator color patch values for your printer is available.

• Choose your monitor type from the

Monitor pop-up menu.

711

• In the Gamma field, enter the same target gamma setting you used in

Adobe Photoshop to calibrate your monitor. (To check the value, in the

Control Panels folder of the System

Folder, double-click the Gamma icon; the Adobe Photoshop Gamma Control

Panel appears.)

Note: Adobe Photoshop uses a color model developed by the Centre Internationale d’Eclairage (CIE) to convert images between RGB and CMYK modes.

The CIE color models are international color definition standards that are device independent and are supported by PostScript Level 2.

4 Compare the on-screen color chart to the printed color bar.

5 In the Color Matching dialog box, click any color swatch that does not match your printed color sample.

The Color Picker appears. The Original swatch shows the current RGB approximation from the Color Matching dialog box. The New swatch changes as you adjust it to match the CMYK color on the printed color bar.

712

6 Adjust the screen color to match the printed color in one of these ways:

• Drag the circle in the middle of the main color field to a new location.

• Drag the slider up or down on the luminosity bar to the right of the color display box.

• Enter new values in the Hue, Saturation, and Brightness text boxes, or in the Red, Green, and Blue fields; you can type decimal percentages in these fields.

You can also scroll through nondecimal percentages by clicking the scroll arrows to the right of the entry field.

7 When the color in the New swatch matches the printed sample, click OK.

• Repeat steps 4 through 7 for each color in the Color Matching dialog box that does not match your printed sample.If the colors do not match, you can set the correct gamma value by contacting your monitor manufacturer, contacting your workstation manufacturer, or adjusting the colors using the

Adobe Color Picker to match the printed sample.

713

To adjust colors using the Apple Color

Picker:

1 In the Color Matching dialog box, click the color swatch that does not match your printed color sample to display the Color Picker.

The color swatch displays an ink simulation, or CMYK approximation, of the color. You should match the swatch to your printed sample.

2 Adjust the screen color in one of the following ways:

• Enter new values in the Hue, Saturation, and Brightness text boxes, or in the Red, Green, and Blue text boxes; you can also type decimal percentages in these text boxes. Each color value can range from 0 to 65,535.

• Drag the sliders that appear next to these text boxes. You can also scroll through nondecimal percentages by clicking the scroll arrows in the sliders.

• Choose a color from the Option menus next to the sliders.

714

3 When the screen color matches the printed sample, click OK.

4 Repeat this procedure for each of the colors in the Color Matching dialog box that does not match your printed sample.

715

Step 2: Check colors in your artwork

After calibration, colors in the artwork may look different, because they more closely match the printed output. For example, an object that looked red on the screen before may now look orange.

At this point, you need to correct any color problems in the artwork.

See

• Types of colors you can use, and how they are separated

• Printing gradients as separations

716

Types of colors you can use, and how they are separated

You can paint artwork with process colors, spot colors, or a combination of both.

See

• Creating a process color

• Selecting colors using other color systems

• Creating custom colors

• Setting paint attributes

Every ink color, whether process or custom, is printed as an individual separation. When printing separations, you can convert spot colors to their process color equivalents .

717

Printing gradients as separations

When separated, a gradient between two custom colors creates custom color artwork; a gradient that uses any noncustom color creates process color artwork. To create a gradient that will separate on one piece of film between a custom color and white, create a gradient fill between the custom color and a 0% tint of the color.

Note: If you create a gradient between two custom colors, make sure that the colors are assigned different screen angles in the Color Separation Setup dialog box. See Specifying the halftone screen ruling .

You cannot separate gradients as a combination of custom (spot) and process color plates because the spot color will automatically be converted to black or white for a process color gradient.

To print a gradient with both spot and process colors from a separation program, convert all spot colors to process equivalents.

718

Step 3: Select overprint options for colors you want to appear transparent

By default, both fills and strokes in the

Adobe Illustrator program appear opaque because the top color knocks out , or cuts out, the area underneath.

You can prevent knockout by using the

Overprint option in the Paint Style palette to make overlapping printing inks appear transparent .

Note: The degree of transparency depends on the ink, paper, and printing method used. Consult your print shop to determine how these variables will affect your final artwork.

You cannot preview the effects of overprinting. On-screen, you can approximate the colors on overprinted objects with the Hard filter . However, carefully check overprinted colors on separated artwork using integral or overlay proofs.

719

Colors knock out by default

Overprint option on

The Overprint Black dialog box allows you to set black fill or black stroked lines to overprint (or, alternatively, to remove overprinting commands from black fill or black stroked lines).

You may want to overprint in the following situations:

• Overprint 100% black lines against a color background when the illustration style allows.

720

• Overprint when the artwork does not share common ink colors and you want to create a trap or overlaid ink effects.

When overprinting process color mixes or custom colors that do not share common ink colors, the overprint color is added to the background color. For example, if you print a fill of 100% magenta over a fill of 100% cyan, the overlapping fills appear violet, not magenta.

721

To print colors transparently by overprinting:

1 Select the object or objects that you want to overprint. This example shows the yellow and magenta fills selected.

Cyan

(bottom)

Magenta

(middle)

Yellow

(top)

2 Choose Object

Paint Style.

3 In the color selection options, select the Fill Overprint option.

If you use the Overprint option on a

100% black stroke or fill, the black ink may not be opaque enough to prevent the underlying ink colors from showing through. To eliminateshow-through, use a four-color (rich) black instead of a

100% black. Consult with your print shop about the exact percentages of color to add to the black.

722

The preview on-screen appears the same as before, but the selected colors overprint when printed as a separation.

To set or remove overprinting from black lines:

1 Select the objects that will have overprinting added or removed. You can set overprinting for custom colors that contain a specific percentage of black or for process colors that include black.

2 Choose Filter > Colors > Overprint

Black.

3 In the dialog box, select Add to add overprinting; select Remove to remove overprinting commands.

4 Enter the percentage of black to indicate which objects will have overprinting added or removed. For example, enter 80% to select only objects containing at least 80% black.

5 Choose any of the following options:

• Select the Fill option, Stroke option, or both options to apply overprinting to filled paths, stroked paths, or both types of paths.

723

• Select the Include Blacks with CMY option to apply overprinting to paths painted with cyan, magenta, or yellow if the path also contains black at the specified percentage.

• Select the Include Custom Blacks option to apply overprinting to custom colors that include black at the specified percentage.

6 Click OK.

See also Overprinting black in the separation

724

Step 4: Create a trap to compensate for misregistration on press

Misregistration can cause gaps between colors on the final output when colors printed from separate plates overlap or adjoin one another. To compensate for potential gaps between colors in artwork, print shops use a technique called

trapping to create a small area of overlap (called a trap) between two adjoining colors. See About traps .

Illustrator traps artwork two ways. The first method—the Trap filter —automatically creates a trap for artwork. The filter works with simple objects and objects whose parts can be selected and trapped individually. The filter is not suitable for complex artwork; for example, it does not work with gradients, patterns, placed images, or strokes.

725

Artwork suitable for Trap filter

Artwork unsuitable for Trap filter

The second trapping method is changing individual objects’ stroke with the

Paint Style palette’s Overprint option .

You can also create trap using a dedicated trapping program, such as Adobe

TrapWise®.

See

• Trapping with tints

• Trapping type

• Using the Trap filter

• Trapping by overprinting

About traps

When overlapping painted objects share a common color, trapping may be unnecessary if the color that is common to both objects creates an automatic trap. For example, if two overlapping objects contain cyan as part of their

CMYK values, any gap between them is covered by the cyan content of the object underneath.

There are two types of trap: a spread, in which a lighter object overlaps a darker background and seems to expand into the background; and a choke, in which a lighter background overlaps a darker object within the background and seems to squeeze or reduce the object.

Spread: Object Choke: Background background

727

You can create both spread and choke in the Adobe Illustrator program.

It is generally best to scale your graphic to its final size before adding a trap.

Once you create a trap for an object, the amount of trapping will increase or decrease if you scale the object. For example, if you create a graphic that has a 0.5-point trap and scale it to five times its original size, the result will be a

2.5-point trap for the enlarged graphic.

728

Trapping with tints

When trapping two light-colored objects, the trap line may show through the darker of the two colors, resulting in an unsightly dark border. For example, if you trap a light yellow object into a light blue object, a bright green border is visible where the trap is created.

To prevent the trap line from showing through, you can specify a tint of the trapping color (in this example, the yellow color) to create a more pleasing effect. Check with your print shop to find out what percentage of tint is most appropriate given the type of press, inks, paper stock, and so on, being used.

729

Trapping type

Trapping type can present special problems. Avoid applying process colors to type at small point sizes, because any misregistration can make the text difficult to read. Likewise, trapping type at small point sizes can result in hard-toread type. As with tint reduction, check with your print shop before trapping such type. For example, if you are printing black type on a colored background, simply overprinting the type onto the background may be enough.

To trap type, you can put a copy of the text behind the original, and create the trap line as a stroke set to overprint.

You can also trap type by first converting it to outlines with the Create Outline filter. You can then create a trap for it as you would with any other graphic object. However, when you convert type to outlines, hinting is lost. Hinting optimizes how type prints at small point sizes on printers with a resolution of

600 dots per inch (dpi) or less. Also, you cannot edit text after you convert it to outlines, because it is no longer type.

730

Using the Trap filter

The Trap filter creates traps for simple objects. The filter identifies the lighter artwork—whether it’s the object or the background—and overprints (traps) it into the darker artwork.

Area of trap

Area of knockout

Foreground color

Background color

Function of Trap filter

See also

• Trapping by overprinting

• Step 4: Create a trap to compensate for misregistration on press.

731

If the top and bottom objects have similar color densities so that one color is not obviously darker than the other, the

Trap filter will determine the trap based on slight differences in color. If the trap specified by the Trap dialog box is not satisfactory, you can use the Reverse

Trap option to switch the way in which the Trap filter traps the two objects.

Light object, dark Dark object, light background: Trap background: Trap filter makes spread.

filter creates choke.

To create a trap using the Trap filter:

Select two or more objects.

Choose Filter

Pathfinder

Trap.

3 In the Thickness text box, enter a stroke width of between 0.3 and 1.0 point. Check with your print shop to determine what value to use.

732

4 Enter a value in the Height/Width Percentage text box to specify the trap on horizontal lines as a percentage of the trap on vertical lines.

Specifying different horizontal and vertical trap values lets you compensate for on-press irregularities, such as paper stretch. Contact your print shop for help in determining this value. The default value of 100% results in the same trap width on horizontal lines and on vertical lines. To increase the trap thickness on horizontal lines without changing the vertical trap, set the Height/Width value to greater than 100%. To decrease the trap thickness on horizontal lines without changing the vertical trap, set the

Height/Width value to less than 100%.

Height/Width set to 50%

Height/Width set to 200%

733

5 Enter a Tint Reduction value to change the tint of the trap. The default value is 40%.

The Tint Reduction value reduces the values of the lighter color being trapped; the darker color values remain at 100%.

The Tint Reduction value also affects the values of custom colors.

Tint reduction 100% Tint Reduction 50%: Trap has 100% of lighter color.

Trap has 50% of lighter color.

6 Select additional trapping options as required:

734

• Select the Convert Custom Colors to

Process option when trapping custom colors if you want to convert the trap to equivalent process colors. This option creates an object of the lighter of the custom colors and overprints it. By converting the trap to a process color, you prevent another custom color (and separation) from being created just for the trap.

• Select Reverse Traps to trap darker colors into lighter colors. This option does not work with rich black—that is, black that contains additional CMY colors.

7 Click OK to create a trap on the selected objects. Click Defaults to return to the default trapping values.

735

Trapping by overprinting

For more precise control of trapping and for trapping complex objects, you can create the effect of a trap by stroking an object and setting the stroke to overprint.

When stroking an overprinting a line you can trap just part of an object or trap a line .

See also Using the Trap filter .

To create a spread by overprinting:

1 Select the topmost object of the two objects that must trap into each other.

2 Choose Object > Paint Style.

736

3 Choose one of two options:

• To create a spread, enter the same color values for the Stroke as appear in the Fill options. This method enlarges the object by stroking its boundaries with the same color as the object’s fill.

Stroke creates spread trap

Fill creates knockout

Area of trap Area of knockout

Object stroked with 1-point stroke of fill color

• To create a choke, enter the same color values for the Stroke as appear in the lighter background; the Stroke and Fill values will differ. This method reduces the darker object by stroking its boundaries with the lighter background color.

737

Stroke creates choke trap

Fill creates knockout

Area of trap Area of knockout

Object stroked with 1-point stroke of background color

4 In the Weight text box, enter a stroke width of between 0.6 and 2.0 points.

A stroke weight of 0.6 point creates a trap of 0.3 point. A stroke weight of 2.0 points creates a trap of 1.0 point. Check with your print shop to determine what value to use.

5 In the color selection options, select

Overprint Stroke.

In a spread, the lighter object traps into

(overprints) the darker background. In a choke, overprinting the stroke causes the lighter background to trap into the darker object.

738

To trap a line:

1 Select the line to be trapped.

2 In the Paint Style palette, stroke the line with white, and select the desired line weight.

3 Copy the line, and choose Edit

Paste in Front. The copy is used to create a trap.

4 In the Paint Style palette, stroke the copy with the desired color, and choose a line weight that is wider than the bottom line.

5 Select the Overprint option for the top line.

Top stroke creates spread trap

Bottom stroke creates knockout

Area of trap Area of knockout

Copy of stroke used for spread trap

739

To trap part of an object:

1 Draw a line along the part of the object you want to trap. If the object is complex, select the edges using the direct-selection tool , copy them, and choose Edit > Paste in Front to paste the copy directly on top of the original.

Drop shadow with a trap

Line drawn where two shapes intersect creates a trap.

2 Choose Object > Paint Style.

3 Select a color value for the Stroke to create either a spread or a choke. If you are uncertain about which trap is appropriate, see About traps .

4 Select the Overprint option for the stroke.

740

Step 5: Place crop marks around the image to be separated

You can place crop marks around the image to be separated either directly on the artwork or place the crop marks in the separations . Crop marks indicate the area that will be imaged. When creating crop marks for color separations:

• If you are setting crop marks in the original artwork and want the artwork to contain bleed (a margin added to the image so that it can be trimmed after printing), make sure that you extend the artwork past the crop marks to accommodate the bleed.

• If you plan to separate several small pieces of artwork in the same file, you can create a set of crop marks or trim marks for each piece of artwork—for example, if the file contained several business cards that you planned to separate. To create more than one set of crop marks, draw or place the crop marks in Adobe Illustrator, or use the

Trim Marks filter .

741

Step 6: Set separation options

Setting up a separation involves choosing the separation options, and then printing or saving the file. The separation settings you choose for a document are saved with the separated file. If you open a file that has never been separated in Illustrator, the program returns to the default settings.

To choose separation options:

1 Choose one of the following options:

• Choose File

Separation Setup.

• Choose File > Print, and then select

Separation Setup.

2 Select the PPD file that corresponds to your printer or imagesetter.

3 Choose options as described in the following topics; then click OK.

jump to art

742

See

• Specifying whether to preview the artwork

• Specifying which layers to separate

• Specifying which colors to create separations for

• Separating custom colors as process colors

• Specifying the halftone screen ruling

• Specifying the page size and orientation

• Specifying a custom page size

• Specifying the emulsion

• Specifying the image type

• Overprinting black in the separation

• Specifying the bleed area

• Specifying the bounding box in the separation

• Specifying printer’s marks

743

Selecting a PPD file

To define the output device for the separation, you select the PostScript Printer

Description (PPD) file that corresponds to your printer or imagesetter. To obtain

PPD files not included with the program, see the ReadMe file in the Utilities/PPDs folder in the Illustrator folder.

A PPD file contains information about your output device, including its resolution, available page sizes, line screen rulings, and screen angles. Loading the file displays the different settings for the output device in the Separation

Setup dialog box.

To select a PPD file:

1 In the Separation Setup dialog box, click Open PPD.

2 Locate the PPD folder, which was placed in the Utilities folder when you installed the Adobe Illustrator program.

If you didn’t install the PPD folder when you installed Adobe Illustrator, install the folder now; see Adobe Illustrator

Getting Started for instructions.

744

(If you installed the PSPrinter driver, you may also have a set of PPD files in the

Printer Descriptions folder, located in the Extensions folder in the System

Folder.)

3 Select a PPD file that corresponds to the output device you will use to print your separations, using the scroll bar as needed. The filenames correspond to the printer or imagesetter name and model and have a .ppd file extension.

4 Click Open. The name of the PPD file you selected appears in the dialog box, along with the name of the currently selected printer.

5 Choose other separation options as described in the following sections, or click OK.

745

Specifying whether to preview the artwork

The Preview option lets you determine whether to display a preview of the artwork in the Separation Setup dialog box, or display a bounding box with an

X through it.

To preview the artwork:

1 In the Separation Setup dialog box, select the Preview option.

2 Specify another separation option, or click OK.

746

Specifying which layers to separate

The Layer pop-up menu lets you specify which layers to include in the separation. For more information on layers, see Using Layers .

To specify which layers to separate:

1 In the Separation Setup dialog box, choose one of the following options from the Layer pop-up menu:

• To separate only the printable layers, choose Printable.

• To separate only the visible layers, choose Visible.

• To separate all layers, choose All.

2 Specify another separation option, or click OK.

747

Specifying which colors to create separations for

The Separation Setup dialog box labels each separation with the color name that Illustrator assigned it. If a dot appears next to the color name under the printer icon, Illustrator will create a separation for the color. A dot under the crossed-out printer icon means that

Illustrator won’t create a separation.

Dots indicate whether colors will be separated

748

To specify whether to create a separation for a color:

1 Choose one of the following options:

• To create a separation, click next to the color’s name under the printer icon.

A black dot appears.

• To not create a separation, click next to the color’s name under the crossedout printer icon. A black dot appears.

2 Under the printer icon in the Separation Setup dialog box, click next to the color’s name. A black dot appears.

3 Specify another separation option, or click OK.

749

Separating custom colors as process colors

You can separate custom colors as equivalent CMYK process colors in the artwork for separations only, without affecting the original artwork. Named

CMYK colors are then printed as CMYK separations rather than on a single plate; spot colors are printed as their

CMYK equivalent on the process-color plates.

If you save your separations, any color conversion is saved in the separation files.

To separate all custom colors as process colors:

Select the Convert to Process option. A gray dot appears next to each custom color under the process-color icon.

750

Dots next to custom colors indicate whether they will be converted to process colors

To separate individual custom colors as process colors:

1 Deselect the Convert to Custom option.

2 Under the process color icon in the

Separation Setup dialog box, click next to the custom color’s name. A black dot appears.

3 Specify another separation option, or click OK.

751

Specifying the halftone screen ruling

The Halftone menu displays one or more sets of line screens (lines per inch, or lpi) and resolutions (dots per inch, or

dpi) available on the printer or imagesetter that will be used to print the color separations.

A high line-screen ruling (for example,

150 lpi) spaces the dots used to create an image closely together to create a finely rendered image on the press; a low screen ruling (60 lpi to 85 lpi) spaces the dots farther apart to create a coarser image. The size of the dots is also determined by the line screen. A high line-screen ruling uses small dots; a low screen ruling uses large dots. The most important factor in choosing a line-screen ruling is the type of printing press on which your job will be printed.

Ask your print shop how fine a line screen its press can hold, and make your choices accordingly.

752

The PPD files for high-resolution imagesetters offer a wide range of possible line-screen rulings paired with various imagesetter resolutions. The PPD files for lower resolution printers typically have only a few choices for line screens, and they are coarser screens of between

53 lpi and 85 lpi. The coarser screens, however, give optimum results on lower resolution printers. Using a finer screen of 100 lpi, for example, actually decreases the quality of your image when a low-resolution printer is used for final output.

To specify a halftone screen ruling and resolution:

1 In the Separation Setup dialog box, choose one of the following options:

• To select one of the preset halftone screen ruling and printer resolution combinations, choose one from the

Halftone pop-up menu.

• To specify a custom halftone screen ruling, enter the lpi value in the

Frequency text box and a screen angle value in the Angle text box.

753

Note: The default angles and frequencies are determined by the selected PPD file. Be sure to check with your print shop for the preferred frequency and angle before creating your own halftone screens.

2 Specify another separation option, or click OK.

754

Specifying the page size and orientation

Adobe Illustrator normally uses the page size default in the PPD file for the selected printer. However, you can change the page size to any of the sizes listed in the PPD file as well as specify portrait (vertical) or landscape (horizontal) orientation. Page sizes are listed by a familiar name (such as “Letter”) and by dimensions in points. The dimensions shown in parentheses after the page size are the limits of the imageable

area. The imageable area is the total page size less any unprintable border used by the printer or imagesetter. Most laser printers cannot print to the exact edge of a page.

If you select a different page size (for example, change from letter to legal), the size of the artwork in the preview window changes. This is because the white area in the preview window reflects the imageable area for the page size you have chosen.

755

Note: The imageable area may vary by

PPD file, even for the same page size (for example, letter), because different printers and imagesetters define the sizes of their imageable areas differently.

Make sure that your page size is large enough to contain your artwork as well as crop marks, registration marks, and other necessary printing information.

To conserve imagesetter film or paper, however, select the smallest page size that will accommodate your artwork and necessary printing information.

Page size: Letter Page size: Legal

756

To specify a page size:

1 In the Separation Setup dialog box, choose an option from the Page Size pop-up menu.

2 Specify another separation option, or click OK.

To specify the orientation of the page:

1 In the Separation Setup dialog box, choose Portrait or Landscape from the

Layout pop-up menu.

2 Specify another separation option, or click OK.

757

Specifying a custom page size

You can specify a custom page size using the Custom Page Size option in the Page Size pop-up menu. This option is available only if you are using a printer that accommodates various page sizes, such as a high-resolution imagesetter. The PPD file for a laser printer, for example, does not provide this option.

The largest custom page size you can specify depends on the maximum imageable area of your imagesetter.

Consult the documentation on your specific printer for more information.

To specify a custom page size:

1 In the Separation Setup dialog box, choose Other from the Page Size pop-up menu.

2 Choose from the following options:

• To specify the smallest page size needed for your artwork and printer’s marks, click OK to accept the default values.

758

• To specify a page size larger than the default, enter a new width and height in points in the Width and Height fields. Be sure to increase the values; decreasing the default values may clip your artwork.

• If desired, change the placement of the page by entering a value in points in the Offset field.

Film Offset

Imageable area

Offset off Page moves left with Offset on

The Offset value specifies the amount of space along the right side of the imageable area. For example, entering a value of 30 points in the Offset option moves your page 30 points to the left.

759

• To rotate your page 90 degrees, select

Transverse and click OK. Note that the vertical arrows in the margins of the preview window are displayed horizontally, indicating that the imageable area has been rotated.

Transverse off Page rotated

90 degrees with

Transverse on

If your imagesetter can accommodate the longest side of your imageable area, you can conserve a considerable amount of film or paper by using the

Transverse option in conjunction with the Offset option. Compare the following examples of an image printed by

Adobe Illustrator with the Transverse option on and off.

760

Offset value Offset value

Film

Saved

Transverse off Film saved with

Transverse on

When both the Offset and Transverse options are selected, the Offset option controls the amount of space between the separations.

761

Specifying the emulsion

Emulsion refers to the photosensitive layer on a piece of film or paper. Up

(Right Reading) means that type in the image is readable (that is, “right reading”) when the photosensitive layer is facing you. Down (Right Reading) means that type is readable when the photosensitive layer is facing away from you. Normally, images printed on paper are printed Up (Right Reading), whereas images printed on film are often printed

Down (Right Reading). Check with your print shop to determine which emulsion direction it prefers.

To tell whether you are looking at the emulsion side or the nonemulsion side

(also referred to as the base), examine the final film under bright light. One side will appear shinier than the other.

The dull side is the emulsion side; the shiny side is the base.

762

To specify the emulsion:

1 In the Separation Setup dialog box, choose Up (Right Reading) or Down

(Right Reading) from the Layout pop-up menu. The image flips.

2 Specify another separation option, or click OK.

763

Specifying the image type

The image options determine the image exposure: negative or positive. Typically, print shops require negative film in the United States and positive film in Europe and Japan. If you are unsure about which image type to use, consult your print shop.

To specify the image type:

1 In the Separation Setup dialog box, choose Positive or Negative from the

Image pop-up menu.

2 Specify another separation option, or click OK.

764

Overprinting black in the separation

It can be cheaper and easier to have the print shop overprint black on the press.

You can choose whether to overprint black when printing or saving selected separations. By default, Adobe Illustrator version 3.2 and earlier overprinted black and required you to specify a fourcolor black to knock out black.

For more information, see Step 3: Select overprint options for colors you want to appear transparent .

To overprint black in the separation:

1 In the Separation Setup dialog box, choose the Overprint Black option.

2 Specify another separation option, or click OK.

765

Specifying the bleed area

Bleed is the amount of artwork that falls outside of the bounding box, or crop marks and trim marks. You can include bleed in your artwork as a margin of error—to ensure that the ink is still printed to the edge of the page after the page is trimmed, or to ensure that an image can be stripped into a keyline in a document. Once you create the artwork that extends into the bleed, you can use Illustrator to specify the extent of the bleed.

By default, Illustrator applies a bleed of

18 points. This means that the artwork extends 18 points beyond the crop marks on your film. The maximum bleed you can set is 72 points; the minimum bleed is 0 points.

The size of the bleed you use depends on its purpose. A press bleed (that is, an image that bleeds off the edge of the printed sheet) should be at least

18 points. If the bleed is to ensure that an image fits a keyline, it needs to be no more than 2 or 3 points. Your print shop can advise you on the size of the bleed necessary for your particular job.

766

If you set crop marks directly in the artwork, rather than in the separation, changing the bleed affects only how much of your artwork shows beyond the crop marks; it does not change how your artwork is cropped. If you set crop marks using the Color Separation Setup dialog box, changing the bleed moves the crop marks farther from or closer to the image; the crop marks still define the same size bounding box, however.

Small bleed Large bleed

To specify bleed:

1 In the Separation Setup dialog box, enter an amount in the Bleed text box.

2 Specify another separation option, or click OK.

767

Specifying the bounding box in the separation

The bounding box is represented as a light- gray rectangle surrounding the artwork in the Color Separation Setup preview window; this rectangle coincides with the crop marks you set in

Adobe Illustrator.

The numbers in the Bounding Box text boxes show where the image lies within the page. These numbers measure the distance from the 0, 0 point in the imageable area to the edges of the bounding box. When you save a file in

Adobe Illustrator, the ruler position is saved with the file. Illustrator sets the

0, 0 point from this ruler origin. If you do not change the ruler origin in Adobe

Illustrator, the 0, 0 point is in its default position at the bottom left corner of the page boundary.

If you select a different page size, the

Bounding Box numbers change as

Illustrator calculates the distance of the bounding box from the edge of a new page size.

768

Note: The Bounding Box numbers for a given page size (such as Letter) may vary by PPD file. This is because printers and imagesetters may differ in how they define the size of an imageable area.

To specify the bounding box:

1 In the Separation Setup dialog box, choose one of two options:

• Enter values in the Left, Right, Top, and Bottom text boxes. Press the Tab key to go to the next text box.

• Drag any of the size handles in the preview.

2 Specify another separation option, or click OK.

769

Specifying printer’s marks

When you prepare artwork for printing, a number of marks are needed for the printer to register the artwork elements precisely and verify correct color. These marks include such elements as crop marks, registration marks, star targets, calibration bars, and labels. The Color

Separation Setup dialog box enables you to add these marks to your separations.

jump to art

The Use Default Marks option adds the following marks to the separations:

• Crop marks. Illustrator places crop marks at the edges of the artwork’s bounding box. The bounding box sets the position of the crop marks on your artwork; it designates to Illustrator the printable boundaries of the artwork and nonprintable boundaries, such as direction lines.

770

For more precise control over the placement of crop marks, use the Make Cropmarks command. For more information about the Make Cropmarks command, see Setting crop marks .

• Registration marks and star targets.

Illustrator places two types of marks around your artwork that the print shop uses to align the separations; they are

registration marks and star targets.

Registration marks are the most commonly used marks in printing, because they are easy to line up accurately. Star targets are harder to align than registration marks, but they are extremely accurate.

• Labels. Illustrator labels the film with the name of the file, the line screen used, the screen angle for the separation, and the color of each particular plate. These labels appear at the top of the image.

Important: Do not remove the labels from the separations before printing.

Doing so may make it impossible for the stripper to determine which separation belongs to which color.

771

To specify printer marks:

1 In the Separation Setup dialog box, select the Use Default Marks option.

2 Specify another separation option, or click OK.

772

Step 7: Print and save separations

When you have completed setting up the separations, you are ready to print or save your separations.

Note: The printer or imagesetter you plan to use to print separations must match the PPD file you specified when setting up the separations. If the output device and PPD file don’t match, an error message will appear, and the separations won’t print.

Saving the file saves the separation setup, PPD information, and any color conversions you have specified in the

Separation Setup dialog box.

To print the separations you selected:

1 Select the separations you want to print. See Step 6: Set separation options for more information.

2 Choose File

Print, or return to the

Print dialog box if it is still open.

3 Choose any print options. See Printing artwork for more information.

773

4 Choose Separate from the Output pop-up menu.

5 Select the Printer option as the destination, and click Print.

To save the separations you selected:

1 Select the separations you want to save. See Step 6: Set separation options for more information.

2 Choose File

Print, or return to the

Print dialog box if it is still open.

3 Choose any print options. See Printing artwork for more information.

4 Choose Separate from the Output pop-up menu.

5 Select the PostScript File option as the destination, and click Save.

6 Accept the default filename, or enter another name for the separation. If you use the default filename, Illustrator appends the filename with .ps to indicate it is a PostScript file. For example, the separations file created for the document NewArt is named NewArt.ps.

7 Click OK.

774

Separation Setup dialog box

Click on any option for information on that option.

return to text

Specifying printer’s marks

Star target Label clownfish.ai 177lpi 45 o

1 cyan magenta yellow black

Registration

Marks

Black overprint color bar

CMY

CM Progressive color bar

Crop mark return to text

Gradient tint bar

Error Messages and

Troubleshooting

Before you call Technical Support

There are several steps you can take before calling technical support to report a problem. (For information on how to reach technical support, refer to the Technical Support card included in the Adobe Illustrator package.) Performing these steps can solve many problems and often eliminates the need for telephone assistance:

• See the ReadMe file, installed with the program, for last-minute information not included in this user guide.

• Browse through the Adobe Online

Technical Notes on the CD-ROM for information about some of the program’s more advanced features.

• Read through the error messages for answers to problems you may encounter when using the application.

777

In addition, you can try these remedies:

• Restart your computer without the system extensions by holding down the

Shift key and choosing Restart from the

Special menu. Restart Adobe Illustrator.

Then open the Preferences folder in your System Folder, and drag the Adobe

Illustrator Prefs file to the Trash; empty the Trash. Restart Adobe Illustrator.

• Make sure that any SCSI devices you use are securely and fully connected to your computer, and that device cords are not damaged. A bad connection could be the cause of the problem.

• Use a disk tool utility, such as Norton

Utilities or Disk Doctor to check whether your hard disk contains bad sectors that may be causing the crashes. You can then use the Norton Speed Disk utility to optimize and defragment the hard drive. (Defragmenting cleans up any leftover file fragments and orders data contiguously so that it can be accessed quickly.) For instructions, see the utility’s documentation.

• If the problem persists, reinstall

Adobe Illustrator.

778

Error messages

See these symptoms for solutions to the problem you are experiencing:

• –8133 error.

• Cannot print illustration, offending command “clip”. –8133 error.

Limitcheck error.

• Can’t open the hyphenation file “US

English Hyphenation.” Text will not be hyphenated.

• Can’t open the Illustration. Out of memory or missing resource ID = –

192 or –43, occasionally –37, –38, or –39.

• Can’t save preview but all other information was saved successfully.

• Error Context: 161.2474

508.4369L 161.2474 550.2205I (f)

* *U Can’t open illustration. All objects in a compound path must be paths.

• Insufficient memory to open document.

779

• Limitcheck error.

• Out of Memory. Not enough memory to perform the operation requested.

• VM error.

780

–8133 error.

An –8133 error by itself generally means that the overall file is too complex.

You must reduce the number of objects within the file or reduce the complexity of the objects. For more information, see Improving printer performance .

781

Cannot print illustration, offending command “clip”. –8133 error.

Limitcheck error.

A document containing several masks or several compound objects for masks may be difficult to print.

Try to simplify the file, lower the printing resolution, or print to a device with more memory. For more information, see Improving printer performance .

782

Can’t open the hyphenation file “US

English Hyphenation.” Text will not be hyphenated.

The link to your Plug-ins folder is broken. For information on linking

Illustrator to the Plug-ins folder, see

Using plug-in modules .

783

Can’t open the Illustration. Out of memory or missing resource ID = –192 or –43, occasionally –37, –38, or –39.

When the Adobe Illustrator application starts, it checks the software system to determine the output device to be used so that the program can display the correct page size and imageable area. You specify the output device by selecting it from the Chooser. The message “Missing resource” may appear if you have reinstalled Adobe Illustrator, system software, or printing software without specifying an output device. In such cases, you need to reselect the output device in the Chooser. Refer to your

Macintosh documentation for instructions on how to specify an output device.

784

Can’t save preview but all other information was saved successfully.

When you save an EPS file with a preview option other than None, Adobe

Illustrator creates a picture of the file as it appears on-screen and attaches it to the EPS file. The amount of memory required corresponds to the physical dimensions of the image. The larger the image, the more RAM is required to create the picture. Additionally, the program requires more memory to create a color (8-bit) preview than a black-and-white (1-bit) preview.

To allocate more memory for an

EPS file preview:

1 Allocate more memory to Adobe Illustrator. For instructions, see Illustrator has insufficient memory .

2 Try saving the EPS file with the

Preview option set to 1-bit Macintosh.

The file will appear black and white on-screen, but will retain all color information and print properly on a

PostScript printer.

785

3 Try saving the EPS file with the Preview option set to None. The file will appear as a gray box on the screen, but will retain all color information and print properly to a PostScript output device.

786

Error Context:

161.2474 508.4369L

161.2474 550.2205I

(f) *

*U

Can’t open illustration. All objects in a compound path must be paths.

You attempted to reopen a file that contains compound paths (including type that has been converted to outlines) that have been converted to guides.

If you select a compound path and choose Arrange > Make Guide, once you save and close the document, you will not be able to reopen it. Type objects that have been converted to outlines using Create Outlines in the Type menu are defined as compound paths and should not be made into guides. This problem has been addressed in versions

3.0.1 and later of Adobe Illustrator, but these later versions will not be able to open files created in version 3.0 that contain compound path guides.

787

To fix the file so it will reopen in

Adobe Illustrator:

1 Write down the lines of code you get when you try to open the file. They are telling you where the error occurs in the

Adobe Illustrator code.

2 Make a copy of the file to work on.

3 Open the copy in a word-processing program such as Microsoft Word or

MacWrite™. If the file is not recognized by the word-processing program, or if it opens as a graphic, refer to the program’s user guide for instructions on how to open foreign file formats as

ASCII text. The file should open to display the PostScript code that describes your artwork.

4 Search for occurrences of “

(f) *

”.

Note: If the text is stroked but not filled, you will search for “( s

) * ”. If the text is stroked and filled, search for “( b

) *”. If you are using Microsoft Word, you can search using the Find command in the

Utilities menu. You will find the “( f

) *” after the lines of code in the Error

Context that you wrote down.

788

5 Remove the parentheses and the asterisk (just leaving the letter). This will disable the guide attribute for the object.

Sample Adobe Illustrator code:

Bad File Good File

133.7411 540.2636 L 133.7411 540.2636 L

133.7411 498.5 L 133.7411 498.5 L

126.9725 498.5 L 126.9725 498.5 L

126.9725 550.2005 L 126.9725 550.2005 L

135.2532 550.2005 L 135.2532 550.2005 L

161.1034 508.4369 L 161.1034 508.4369 L

161.2474 508.4369 L 161.2474 508.4369 L

161.2474 550.2005 I 161.2474 550.2005 I

( f ) * — change to

—> f

* U

* u

0 R

* U

* u

0 R

If the object was stroked, or stroked and filled, you may be making the following change:

( s ) * — change to

—> s

—

( b ) * — change to

—> b

789

6 Choose File > Save As, and give the file a new name, saving in Text Only format.

7 Close the file.

8 Start Adobe Illustrator, and open the file from within the application.

If you have several compound paths that have been made into guides, you may need to go through this procedure a number of times to get the file to open. Always save backup files in case you accidentally remove the wrong line of code.

790

Insufficient memory to open document.

When you open an illustration, Adobe

Illustrator loads the information into

RAM. The amount of RAM that is available depends on how much total RAM your computer has, your system software configuration, and how much RAM has been allocated to Adobe Illustrator.

To allocate more memory to Adobe Illustrator, see the instructions in Illustrator has insufficient memory .

791

Limitcheck error.

Limitcheck errors usually indicate that part of the file is too complex for the memory the printer has allocated for specific tasks. The accompanying

Offending Command message—such as Curveto, Fill, or Clip—indicates the source of the problem. The Curveto message usually means that one or more paths are causing the problem.

The Fill message can mean that a blend, a mask, a compound path, or a pattern is causing the problem. The Clip message usually indicates a problem with a mask.

Simplify or delete the curve, fill, or mask. See Improving printer performance for more information.

You can decrease the number of patterns, gradients, compound paths, anchor points, etc. Split any complex paths, by selecting the Split Long Paths option in the Document Setup dialog box or by using techniques described in Splitting paths to print large, complex shapes .

You can also choose to print at a lower resolution. See Additional tips for efficient printing for more information.

792

Out of Memory. Not enough memory to perform the operation requested.

Such memory messages indicate that the available RAM is limited. Adobe

Illustrator stores a duplicate of your artwork in RAM that it reverts to if you choose the Undo command. The more

Undo Levels set in the General Preferences dialog box, the more RAM is needed to save the information. However, the program has to duplicate only those objects being edited, so you may be able to work on individual objects or smaller groups of objects. Editing many objects simultaneously may result in the information exceeding the available

RAM.

To allocate more memory to a specific operation:

1 Close any open documents and quit any open applications that you do not need.

2 Select a smaller number of objects to modify.

793

3 To reduce the number of Undo levels, choose File > Preferences > General and decrease the Undo Levels value set in the Edit Behavior option. Click OK.

4 To allocate more memory to Adobe

Illustrator, see the instructions in Illustrator has insufficient memory .

794

VM error.

A VM error usually means the printer has run out of memory. To determine which objects are causing the problem, try printing the file in sections by copying some of the objects in the illustration to a new document and printing; then add objects and print again. Continue this procedure until you receive the VM error again.

Simplify the object or objects that cause the VM error. If a single object won’t print, recreate the object.

795

Troubleshooting

See these symptoms for solutions to the problem you are experiencing:

• Illustrator has insufficient memory

• Anchor points cannot be selected.

• As you try to position anchor points, they jump to a nearby anchor point.

• Unexpected blank pages appear in printed output.

• Stroked shapes that appear to be aligned do not line up when you preview or print.

• Sharp spikes appear in stroked letters, such as M and W, in printed output.

• The screen display is blank in

Preview view.

• Banding or shade-stepping occurs on printed blends or gradient fills.

• A rotated, reflected, or sheared object disappears.

796

• Rectangles, ovals, and graphs appear drawn at an angle.

• Patterns or custom colors are unavailable in the Paint Style palette.The program won’t draw a long path and displays an error message.

• The document will not print, or a limitcheck error message appears when you attempt to print.

• The document will not print on a

QuickDraw printer.

• A streak appears in a filled object when you preview or print it.

• The Make Wrap command under the Type menu doesn’t work.

• The axis options in the Graph Style dialog box are not applied to the graph.

• All of an area graph appears in

Artwork view, but only part of the graph previews and prints.

• Changing the graph type for a single data series doesn’t change the series.

797

• No values appear on the graph axis.

• An error message states that a relatively small graph exceeds the available memory. An error message states that a pattern exceeds the available memory.

• The object’s center point does not appear in the exact center of the object.

• Outline Stroke and Offset Path commands leave overlaps and extraneous points.

• Adjoining objects appear to overlap in Preview view or when printed to low-resolution printers.

798

Illustrator has insufficient memory

Adobe Illustrator uses the amount of memory specified in the Get Info dialog box. You should increase the memory allocation in increments of 1000K. If it appears you need more memory on restarting the program, you can increase the amount more by repeating these steps.

Also see your Macintosh reference guide for more information about allocating memory.

To change the memory allocation for

System 7.0 and 7.0.1:

1 Quit Adobe Illustrator. You cannot change the memory allocation while the application is running.

2 In the Finder, select Adobe Illustrator by clicking once on the program icon.

(Make sure that you select the Adobe

Illustrator program and not the folder.)

3 Choose File

Get Info.

799

4 Enter the desired amount of memory in the Current Size text box of the Get

Info dialog box. Try increasing the amount by 1000K.

5 Close the Get Info dialog box.

To change the memory allocation for

System 7.1, 7.5, and 7.5.1:

1 Quit Adobe Illustrator. Memory allocation cannot be changed while the application is running.

2 In the Finder, select Adobe Illustrator by clicking once on the program icon.

(Make sure that you select the Adobe

Illustrator program and not the folder.)

3 Choose File

Get Info.

4 Enter the desired amount of memory in the Preferred Size field in the Get Info dialog box. Try increasing the amount by 1000K.

5 Close the Get Info dialog box.

800

Anchor points cannot be selected.

The object is locked, or there is another anchor point on top of the anchor point you want to select.

If you think that the object might be locked, choose Arrange > Unlock All.

(Make sure that you unlock each layer individually; Unlock All unlocks only objects on the current layer.)

If you still can’t select the anchor point, select the path that is on top of the path containing the anchor point you want to select, and lock it. Select (and adjust as necessary) the anchor point you have been trying to work with. When you have finished, choose Unlock All again.

Another solution is to select both anchor points by dragging, hold down the Shift key, and click to deselect the front point.

801

As you try to position anchor points, they jump to a nearby anchor point.

The Snap to Point option in the General

Preferences dialog box is selected.

When this option is turned on, an anchor point that you are dragging will snap to any anchor point within 2 pixels of its position.

To prevent anchor points from snapping to another anchor point, choose File

Preferences

General; then deselect the

Snap to Point option. Click OK to return to your document.

If you prefer to leave the Snap to Point option on, use the zoom-in tool to magnify your document so that you have greater control as you edit your artwork.

See also Choosing preferences that affect how objects move

802

Unexpected blank pages appear in printed output.

You are drawing too close to the Adobe

Illustrator program’s page border. A direction point in one of your curves may extend to another page.

When you are ready to print, choose File

> Print. Then click the From button, and specify the pages you want to print.

Another option is to use the page tool to adjust the page grid so that the artwork is farther away from the edge of the page.

If you want to print just one page, select the Single Full Page option in the Document Setup dialog box.

See also Aligning the artboard with the printed page

803

Stroked shapes that appear to be aligned do not line up when you preview or print.

Sharp spikes appear in stroked letters, such as

and

, in printed output.

The miter line join style is causing the corner points to extend beyond the actual anchor points. When you specify this style of line join, the outer edges of two lines that form a corner extend until they meet. If the lines form a sharp angle or have a heavy line weight, the corner can extend farther than expected.

To line up corners properly, select the path with the jutting corners. Choose

Object

Paint Styles, and change the line join style to either the bevel (flat) or the round join option.

You can also set a lower miter limit for mitered corners. Illustrator then will use a shorter path (and smaller angle) when determining at what point to switch from a bevel join to a miter join. See also

To select a Joins option for a line: .

804

The screen display is blank in

Preview view.

The mask attribute is set for a small object in your document, such as a line or a single anchor point, and it is causing all of the objects in front of it to be masked. You may also have unpainted artwork.

To correct the masking:

1 Select the artwork, and verify that it is painted.

2 Choose Edit > Select All; then choose

Object

Release Mask.

Banding or shade-stepping occurs on printed blends or gradient fills.

The blends or gradient fills are too long, or there are too many steps in the blend.

The maximum number of gray levels that can be printed by an imagesetter is

256. If the blend is too long, or the number of steps too many, the image may exhibit bands when printed. To prevent banding, shorten the length of the blend to less than 7.5 inches, use lighter colors, shorten the length of dark blends, or increase the percentage of change in the blend (less than a 50% change can result in banding).

See Printing gradients and color blends .

806

A rotated, reflected, or sheared object disappears.

You have rotated, reflected, or sheared the object off the screen.

To redisplay the object, scroll or zoom out to display the object in its new location, or choose Edit > Undo.

807

Rectangles, ovals, and graphs appear drawn at an angle.

You have rotated the x and y axes. When you draw rectangles, ovals, or graphs, their sides are placed parallel to the current axes.

To reset the axes, choose File > Preferences > General. The value in the Constrain Angle text box shows the current angle of the x axis. You can change this value to 0, delete any rectangles you’ve drawn at an angle, and redraw them so that they are straight; or you can use the rotate tool to rotate the rectangles to the correct position.

Patterns or custom colors are unavailable in the Paint Style palette.

No patterns or custom colors are available. You can create one or more patterns or custom colors for the document. For information on how to do this, see Creating and working with patterns or Creating custom colors . You can also import custom colors and patterns using the Import Styles command; see

Importing styles from other documents .

A variety of patterns can also be found in the Gradients & Patterns folder.

809

The program won’t draw a long path and displays an error message.

If an error message appears telling you to shorten a path you are drawing, you have exceeded the amount of memory needed to draw the path. The PostScript interpreter limits the number of anchor points in a single path based on the amount of memory available.

You must simplify the path by splitting it into smaller units. See Splitting paths to print large, complex shapes .

810

The document will not print, or a limitcheck error message appears when you attempt to print.

Objects in the image are too complex to print. The inability to print generally occurs with very complex objects such as blends, masks, compound paths, patterns, multiple groupings, and so on.

You can either increase the memory on your printer or simplify the artwork.

See Limitcheck error.

for more information.

811

The document will not print on a

QuickDraw printer.

Many drivers for QuickDraw printers, especially color printers, require large amounts of free disk space when printing. These drivers use the disk space to create and temporarily store a large bitmap image of the artwork. The image is then sent to the printer. An error message appears if there is not enough disk space available.

To print the document, free sufficient disk space or reduce the printer resolution, if such a setting is available.

812

A streak appears in a filled object when you preview or print it.

The path is not closed.

To close the path, find the anchor points that are not connected (zoom in to magnify the artwork if necessary), and use the Average and Join commands, or the

Unite command, to close the path.

813

The Make Wrap command under the

Type menu doesn’t work.

There are several possible causes and solutions to this problem:

• The type container is in front of the wrapping object; it must be behind the wrapping object.

To place the type container in back of the wrapping object, select the wrapping object, and choose Arrange

Bring to Front.

• The type container is grouped with another object.

To ungroup the type container, use the selection tool to select the type container; if other objects are selected, the type container is clearly grouped.

Choose Arrange

Ungroup.

• You did not select both the type container and the graphic object.

Select both the type container and the graphic object. Choose Type > Make

Wrap.

See also Wrapping type around a graphic object.

814

The axis options in the Graph Style dialog box are not applied to the graph.

You have not selected the entire graph.

Use the selection tool to select the entire graph; then set the axis style in the

Graph Style dialog box.

815

All of an area graph appears in

Artwork view, but only part of the graph previews and prints.

The area graph does not have the First

Column in Front option turned on in the

Graph Style dialog box.

In the Graph Style dialog box, select the

First Column in Front option.

816

Changing the graph type for a single data series doesn’t change the series.

You have not selected the entire data series.

You must select every object in the data series, including the legends. Using the group-selection tool, click one of the elements of the data series (such as a column or a legend) to select it, and then click again to select the entire series.

No values appear on the graph axis.

Either the Value Between Labels in the

Graph Axis Style dialog box is set to 0 or you have used manual axis values to create more than 30,000 tick marks.

To make values appear on the graph axis, enter a positive or negative value in the Value Between Labels text box in the Graph Axis Style dialog box, or click the Calculate Axis Values From Data option in the Graph Axis Style dialog box.

See also Setting axis tick mark and label options .

818

An error message states that a relatively small graph exceeds the available memory. An error message states that a pattern exceeds the available memory.

You may receive an error message stating that you’re running out of memory if you set too many tick marks on a graph axis, or if you use an overly complex graph or pattern.

Set fewer tick marks in the Graph Axis

Style dialog box, or simplify your graph design. Simplify your pattern; for instructions, see Modifying patterns .

819

The object’s center point does not appear in the exact center of the object.

The center point of an object is defined by the center of an object’s bounding box. Since the direction lines on a given point are considered part of the object, they can make the bounding box larger than the actual object if they extend beyond the visual edge of the object.

When a point’s direction lines extend beyond the visual edge of an object, the center point will not appear in the visual center of the object and will be offset to one side.

See also About direction lines and direction points for more information.

820

Outline Stroke and Offset Path commands leave overlaps and extraneous points.

The Outline Stroke and Offset Path commands may leave triangular overlaps or extraneous points at corner points of the original object.

To remove the triangular overlaps, use the Pathfinder Unite filter. The Unite filter separates the triangular overlaps into individual objects, which you can then select and delete using the deleteanchor-point tool .

821

Adjoining objects appear to overlap in Preview view or when printed to low-resolution printers.

The PostScript overscan conversion rule can cause adjoining objects to look as if they overlap. The Illustrator previewer and PostScript rasterizers in printers overscan the edges of shapes by one device pixel to prevent gaps from appearing between objects.

To correct the problem of overscanning, use an output device with higher resolution, if possible. Imagesetters at high resolution won’t produce visible overscan. See also Resolution and screen frequency basics .

You can also try changing the stacking order of the objects. See Stacking objects for more information about changing the stacking order.

822

Actual Size command 39

ADA. See Adobe Developers Association

Add Anchor Points filter 113, 114

Add Arrowheads filter 333

Add Guides option 486 add-anchor-point tool 17, 114 adding values in fields 48

Adjust Colors command 290

Adobe Acrobat 642

Adobe Developers Association (ADA) 31

Adobe Expert font 521

Adobe Fetch 622

Adobe Gallery Effects User Guide 245

Adobe Illustrator Deluxe CD-ROM 245.

See also the Adobe Illustrator

Getting Started Guide

Adobe Photoshop importing and exporting artwork with 604

Adobe Print Publishing Guide 651, 701

Adobe Streamline 141

Adobe Systems Incorporated Home Page 31

Adobe Technical Support 777

AI User Dictionary 515

Align Objects command 161 aligning objects 161 alignment point. See center point anchor points adding 112

823

E averaging 118 defined 79 deleting 112 deleting stray 115 hiding 111 moving 105 problems selecting 801 angle of constraint 168 annotating files 692 objects 696

Anti-aliased option 244

Apply Knife command 259 area graph 526. See also graphs

Area Select option 97, 100 area type 431 area-type tool 432 arrow keys, moving objects with 158 arrowheads 333 artboard 54

Artwork command 34 artwork, previewing 746

Artwork view 33 in layers 416

Artwork View Speedup filter 34

Attributes dialog box

Output Resolution option 685

Show Center Point option 129

Auto Apply option 282

Auto Trace Gap 144 auto-kerning 452, 456

824

Auto-Leading option 449 autotrace tool drawing with 141 setting gap distance 144

Average command 118 axis of reflection 209 axis options 561

B banding in blends and gradients 668–672 troubleshooting 806 base 762 baseline 420 baseline shift 458 bevel join 328 bit depth 632 bit resolution 656 bitmap images 4–5, 628 applying special effects to 245 creating a tiled effect on 246 importing 602 blank pages 803 screen display 805 bleed 766

Blend Front to Back command 297, 298

Blend Horizontally command 297, 298

Blend Vertically command 297, 298 blending blend tool 17, 223 length, maximum 672–675

825

E shapes 223–226, 227–229 troubleshooting 806

BMP 646 bounding box defined 60 in patterns 359 in separations 768

Bring to Front command 173 brush preferences 122 brush tool 17, 121 butt cap 326

C calibrating, color monitor 706, 710–715

Calligraphic option 123

Calligraphy filter 124 capitalization, changing 520

Case Sensitive option 515

CCITT (International Telegraph and Telekeyed

Consultive Committee) 635 center point 126–131 problem with 820 centered alignment 495 centered-oval tool 125, 127 centered-rectangle tool 125 centered-rounded-rectangle tool 127

Change Case command 520

Change text box 516

Character command 441

Character palette 440, 442

Check Spelling command 515

826

E choke trap 727

CIE (Centre Internationale d’Eclairage) 712

CIE calibration option 711 circles, drawing 128

Cleanup command 115, 323, 439

Clear command 167

Clipboard, importing and exporting artwork with 602 closed paths, defined 79

CMYK colors 287, 706, 708 coincident endpoints 119 color adding to gradient fills 353 adjusting 290 blending 297

CMYK colors. See CMYK colors custom. See custom colors desaturating 292 inverting 293 mixing overlapping 295 mixing semitransparent 296 models 707 painting with 283 saturating 292 selecting objects filled with 320 color bar 710 color blends, printing 668–677

Color Matching command 710

Color Matching dialog box 11

Color Picker 712, 714 color separations. See separations

827

E colorizing a 1-bit image 249

Colors filters 297 column width, in graphs 485, 536 columns, in text 485 commands. See individual command names

Compatible Gradient Printing option 676 composites, printing 661 compound paths 250, 262–263, 264–265 creating 264 defined 262 printing 263 reversing paths within 265

Compound Paths command 682 compression 634

CompuServe Graphics Interchange Format

(GIF) 647 conserving paper, film 756, 760

Constrain Angle option 152, 171 continuous-tone images 5, 649

Control palette 179–181

Convert Custom Colors to Process option 735

Convert to Process option 349 convert-direction-point tool 17, 109 converting strokes to filled objects 257 copying objects 150–160 paint attributes 335 using the Clipboard 602 corner points 88, 92, 109 corner radius value 128

828

Create Mask option 244

Create Outlines command 469 creating documents. See opening documents

Crop filter 253 crop marks 663–665, 741, 770 eliminating 665 setting 663, 767

Cropmarks command 664

Cursor Key option 158 curved segment 87 curves, drawing 90. See also pen tool

Custom Color command 341 custom colors 283, 299–302 and blended objects 229 creating 341–342 deleting 346 globally changing 345 in gradients 349, 353 loading from other color matching

systems 313 modifying 343 separating as process colors 750 spot color output troubleshooting 809 custom startup file 390 custom views 42–43

Cut command 175 cutting objects. See Apply Knife command, knife tool

829

D dashes 522

Data command 532 decimal precision, in graphs 551

Delete Empty Text Paths option 439

Delete key, for removing objects 167

Delete Riders filter 689

Delete Text Paths option 439 delete-anchor-point tool 17, 114 deleting objects 167 deleting unpainted objects 323 deselecting objects 104 designs, creating in graphs 589

Dim Placed Images option 414 direction lines 87 direction points 87, 108 direct-selection tool 17, 18, 96 disappearing objects 805 displaying documents 33–35 distorting objects 222 distributing objects 161 dithering colors on monitors 710

Divide and Outline Will Extract Unpainted

Artwork option 252, 256

Divide filter 252

Document Info command 694

Document List option 447

Document Setup command 57, 61–62, 68 dots per inch (dpi) 631, 752

830

E drag and drop feature 604

Drop Shadow filter 239

E editing text 514 ellipses 523 em space 453 emulsion 762 en and em dashes 522

Encapsulated PostScript. See EPS endpoints 80 coincident 119 joining 119

Entire Document option 523

EPS 640 importing and exporting 601 placing files 611–617 tracing over 145–148

EPSF Riders file 689 erasing paths 83

Error Handler option 692 error information, printing 692 error messages 779–795

Exclude filter 251

Expand command 241 expert fractions 523 exporting artwork 620–622 text files. See importing and exporting text files to Clipboard 602

831

E extensions, restarting without 778 eyedropper tool 17, 335, 338

Fetch. See Adobe Fetch fields, adding and subtracing values in 48 file formats, compatible 600 file size 634

Fill & Stroke for Mask command 273 fill patterns 360. See also patterns filling 277, 281–283 film base 762 conserving 756, 760

Find Font command 446 finding and replacing text 518–519 finding files. See Adobe Fetch

Fit Headline command 507

Fit In Window command 41 flatness 691

FOCOLTONE COLOUR SYSTEM 318 fonts choosing 442–443 family 442 finding and replacing 446–448 free memory (RAM) 23 freehand paths 82 freehand tolerance 81 freehand tool 17, 81–83

832

Gallery Effects filters 245 gamut 709 gap distance 144

General Preferences dialog box

Area Select 100

Auto Trace Gap 144

Auto-Kerning option 456

Baseline Shift 459

Constrain Angle option 152, 171

Corner Radius 129

Cursor Key 153

Freehand Tolerance 83

Greek Type Limit 490

Paste Remembers Layers 178

Ruler Units 47

Scale Line Weight 215

Snap to Point option 152

Tracking 455

Transform Pattern Tiles 153

Type Preference 465

Type Units 465

Undo Levels 27

Use Precise Cursors 83

General preferences dialog box 11 geometric patterns 368

GIF 647 gotolink Painting with custom colors 299 gradient tool 17, 355 gradients 283, 299–300, 305 adding color to 353

833

E applying across multiple objects 356 converting into 241 creating 347–351 custom colors in 353 deleting 358 improving printing of 676 in graph objects 572 masked objects 241 modifying 352 opening files with multicolored 675 printing 668–677 printing as a custom color 349 printing as separations 718 transposing colors in 354 graph axis, no values appear 818 graph designs 582–598 applying 595 creating 589 defined 589 importing 576

Graph dialog box 530 graph styles area 526 changing 572 combining 574 grouped column 526 line 526 pie 526 scatter 526 stacked column 526 graph tool 17, 529 graphic file formats 600

834

E graphs adjusting 545–551 categories 533 cell 532 changing style 572 column width, adjusting 536, 549 combining styles 574 copying and pasting data 542 creating 529 data series problems 817 decimal precision, setting 551 drop shadow, adding 568 editing data 543 entering data 531, 531–536 horizontal (x) axis 534 importing data 540–541 labels 533, 537 legends 533, 569 options, setting 552–567 painted with gradient fills 572 partially previewing and printing 816 pasting data from other programs 531 problems with 815–819 selecting parts of 578–581 setting style options 552–576 transposing data 536, 546 using numbers as category labels 534 vertical (y) axis 534 worksheet 532

Greek Type Limit 490 greeking 490 grouped column graph 526, 554 grouped objects moving 173 selecting 191

835

E grouping objects 190 stacked objects 194 group-selection tool 17, 18, 96 using in graphs 578 guide objects 185–189 gutter size 484

Hairlines 325 halftone screen ruling 752 halftoning 649 hand tool 17, 18, 38 hanging punctuation 492, 498

Hard command 295 headline type 507

Hide Edges command 111

Hide Template command 140 hiding and locking objects 195–196 hinting 730 home page 31 horizontal scale 460 hyphenation 509–512

Hyphenation Options dialog box 12

I image compression 634 resolution 655 type, specifying 764 imageable area 52, 755

836

E imagesetters 59

Import Styles command 313, 389 importing artwork 609 graph designs 576 styles 389 importing and exporting artwork 599–626 text files 473–475, 602

Include Placed EPS files option 622 indentation 492 indexed-color bitmaps 633

Info palette 182

Intersect filter 251

Invert Colors command 293

Join command 119

JPEG 635 justified alignment 495 justify last line 495

K kerning 452

Keyboard Increments option 464–465 keyboard quote marks 522 keyboard text symbols, replacing 521 knife plug-in tool 259

L labels 771

837

E landscape (horizontal) orientation 755

Language option 513 languages specifying for hyphenation 513 specifying for spell checking 517 layers changing order of 405 choosing a selection color for 415 creating 398–399 deleting 407 displaying in Artwork view 416 hiding 411 locking 408–410 moving objects between 401–404 nonprinting 417 selecting 400 separating 747 showing 411

Layers palette 395 leading 449–451

Learned Words dialog box 517 left alignment 495 legends, in graphs 569

Lemple-Zif-Welch (LZW) 635

Level 1 imagesetters 670 ligatures 521 limitcheck error 680, 684 line attributes, setting 324–334 line graph 526, 556 line screen defined 690

838

E maximum with gradients 671 printer 752 line trap, creating 739 line weight 214, 324 lines arrowheads 333 dashed 329 drawing with the pen tool 84 wavy and zigzag 331

Link Blocks command 478

Location of Placed Art menu (in Attributes dialog box) 615

Lock command 196 locking objects 195 lossless compression 634

LZW (Lemple-Zif-Welch) 635

MacPaint 138 magnifying and reducing views 39–41

Make Compound Paths command 264

Make Cropmarks command 771

Make Guide option 188

Make Mask command 266

Make Riders command 690

Make Riders filter 689

Make Wrap command 488 masks 266–274 adding objects to 270 creating 268 filling and stroking 273

839

E modifying 270 releasing 805 selecting 272 measure tool 17, 182 memory allocation, changing 799–800 memory, and printing 680

Merge filter 253

Minus Back filter 252

Minus Front filter 251

Misregistration 725

Misspelled Words list 516 miter join 327 miter limit 327, 804 miter line, problems with 804 monitor resolution 653 mouse pointer 16

Move command 159

Move option (Transform Each dialog box) 163 moving groups of objects 163 moving objects 66, 150–160 by dragging 156 using arrow keys 158 moving the view of a document 38 multiple master fonts 446

N negative image 764

New command 8 new documents. See opening documents

New Window command 44

840

E newlink General Preferences Dialog Box 13 nonimageable area 53

Nonuniform Scaling option 215

Note text box 696

Object Mosaic filter 246

Offset option 759, 760

Offset Path filter 165 offset value 759

Open command 8, 607 open paths defined 79 ending 86 opening documents 8, 607

Outline filter 252

Outline Path filter 257 outlining objects. See stroking

Output Resolution, setting 684 oval tool 17, 125, 126 ovals, drawing 125–129 overlapping objects 822

Overprint Black command 723, 765 overprinting 719–724, 736–740 black 765 on composite proofs 661 to create spread trap 739

P page boundaries 66

Page Setup dialog box 68, 658

841

E page size 755. See also artboard page tool 17, 67 paint copying attributes 335–338 setting attributes 281–283 paint bucket tool 17, 335, 338

Paint Style palette 279–280 adding colors to 284 saving colors in 284 selecting custom colors 301, 304, 305 selecting process colors 288 paint swatches 284–285 clearing 285 painting type 466 painting order. See stacking order

PANTONE assigning colors 303

Color Formula Guide 747XR 314

Process Color Simulator 314 paper stretch 733

Paragraph command 441 paragraph indentation 492

Paragraph palette 440

Paste command 154, 402

Paste in Back command 155, 175, 403

Paste in Front command 154, 175, 402

Paste Remembers Layers option 178

Path Pattern filter 306, 307

Path Pattern library 306 path patterns, defined 360

842

Pathfinder filters 250. See also individual filter names

Pathfinder preferences 256 paths adjusting 105 blending 223 closed 79 closing 86 compound 250, 262, 264 curved 90 defined 79 erasing 83 filling 277 freehand 82 open 79 splitting 116 splitting to print complex shapes 680–683 stroking 277 tracing. See autotrace tool unable to draw a long path 810 path-type tool 435

Pattern command 367 pattern tile 359 patterns 283, 299–300, 303–304,

359–360, 388 converting into 241 corner tiles 377–381 deleting 387 fill 299–305 geometric 368–371 irregular 372–376

843

E masked objects 241 modifying 382–383 moving 384 path 306–312 previewing and printing 388 problems with 809 redefining 383 tiling 384 transforming 385

PC Paintbrush file format (PCX) 645

PDF file format 642–643 importing and exporting 601 reading. See the Adobe Illustrator

Getting Started Guide pen tool 17, 18, 84–95 performance, improving. See the Adobe

Illustrator Getting Started Guide

Photoshop. See Adobe Photoshop picas 46

PICT 138, 154, 603 file format 644 importing and exporting 601 pie graph 526, 558 pixel depth 656 pixels 5, 652 pixels per inch (ppi) 631

Place command 146, 473, 609, 611, 612 placed EPS images, dimming 414 placing

EPS files 611–617 images 36

844

E non-EPS files 609 plug-in filters 14, 29, 243

Plug-ins dialog box 12 preferences command 29 plug-ins toolbox 14 point of origin 199, 212 point size 444 pointer, changing 16 points 46 polygon plug-in tool 130 portrait (vertical) orientation 755 positive image 764

PostScript file format 638 importing and exporting 601

Level 1 and Level 2 638

PostScript Printer description file. See PPD files

PPD files 744, 753 and page size 755 location of 745 selecting 744–745 ppi. See pixels per inch

Precise Cursors option 16 preferences 11 file deleting 778

Preview and Print Patterns option 36

Preview command 34

Preview option 746

Preview Selection command 35

Preview Selection view 33

845

Preview view 33

Print command 659

Printer Descriptions folder 745 printer resolution 654 printer’s marks 770 printer’s quote marks 522 printing color blends 668–677 composites 661 error information 692 file information 694 gradients 668–677 gradients as separations 718 options in Page Setup dialog box 658–660 separations 773 tiling 61 tips for efficient 678 troubleshooting 811 unexpected blank pages 803 process colors. See CMYK colors

Projecting Cap 326

Publish and Subscribe 623–626 publishing text symbols 521

Punk and Bloat filter 236

QuickDraw printer, can’t print from 812

RAM with Pathfinder filters 250

RAM, optimizing use with Adobe Illustrator.

See the Adobe Illustrator

Getting Started Guide

846

Random option 163 rangecheck error 686 raster image 628

Rasterize command 243 rasterizing 628 rectangle tool 17, 126 rectangles 125–129

Redo command 27 reflect tool 17, 208 reflecting objects 208–211 registration marks 771

Release Mask command 805

Release Wrap command 489

Remove Redundant Points option 256

Repeat Transform command 201

Replace Fonts list 447

Report Results option 524 resizing objects. See scaling objects resolution 631 bit 656 changing output 684–685 defined 652 image 655 monitor 653 printer 654 specifying in separations 753 specifying when rasterizing 244 resolution-independent 6 restoring documents 28

847

Reverse Trap option 732, 735

Revert to Saved command 28

RGB 706, 707

Riders file 689 right alignment 495 right reading 762

RLE. See Run Length Encoding

Rotate option 206 rotate tool 17, 202 rotating objects 202–207 rotating the x and y axes 168

Roughen filter 231

Roughening objects 231

Round Cap option 326

Round Corners filter 238

Rounded Join option 327 rounded-rectangle tool 126 row gutter, changing 485 row height, changing 485 rows and columns 484–486 ruler guides 185 ruler origin 49 rulers 45–50 changing units 46, 57

Run Length Encoding (RLE) 634

Same Fill Color command 321

Same Paint Style command 321

Same Stroke Color command 322

848

Same Stroke Weight command 322

Saturate command 292

Save As command 9

Save command 9 saving documents in other file formats 620–

622

Scale Line Weight option 215

Scale option 216 scale tool 17, 214 scaling objects 212–217 scatter graph 527, 560 scissors tool 17, 116 scratch area 55 screen angle 690 screen frequency 657, 690 screen ruling. See line screen

Scribble and Tweak filter 233

SCSI devices, connecting properly 778 searching files. See Fetch

Select All command 103

Select Inverse command 103

Select Masks command 272

Select None command 104

Selected Text Only option 523 selecting all objects in document 103 anchor points 96 filled objects 100 grouped objects 191 layers 400

849

E multiple objects 102 segments 98 text 422 unselected objects 103 selection tool 17, 18, 96

Send to Back command 173 separating custom colors as process colors 750

Separation Setup dialog box 742 separations color controlling space between 761 defined 699 printing 773 saving 773 setting options 742 shade stepping. See banding in blends and gradients shadows 239 shear tool 17 shearing objects 218–221

Shortcuts palette 25

Show Center Point option 129

Show Character command 441

Show Control Palette option 179

Show Edges command 111

Show Paint Style command 281

Show Paragraph command 441

Show Placed EPS Images option 613

Show Tab Ruler command 503

Show Template command 140

Single Full Page option 49, 61

850

E smart punctuation 521–523 smart quotes 522 smart spaces 522 smooth points 88, 109

Snap to Point option 152

Soft filter 296 spacing options 500, 503, 507 speed, improving. See the Adobe Illustrator

Getting Started Guide spelling, checking 515–517 spiral plug-in tool 132

Split Long Paths option 680 splitting paths filled and stroked objects 681 with scissors 116 spot colors. See custom colors spot function 691 spread trap 727 squares 128 stacked column graph 526 stacking order 172

Standard fonts 446 star plug-in tool 135 star targets 771 startup file creating 576 custom 390 deleting colors from 358 status bar 23 straight lines 85

851

E streaking, in filled object 813 stroking defined 277 setting attributes 324 with a pattern 306

Style command 529

Subscribe command. See Publish and

Subscribe subscripts, creating 458 subtracting values in fields 48

Suggested Corrections list 516 superscripts, creating 458

SWOP (standard web offset proofing) 711 system extensions, restarting without 778

System List option 446

Tab Ruler palette 503 tabs 503

Technical Support 777 templates 139 text aligning 495–497 column 472 editing 514 finding and replacing 518–519 flow 484 greeking 490 importing and exporting 473–475 overflow 476 rectangles 427 wrapping 487

852

E third-party developers 31

TIFF 145, 249, 637 importing and exporting 601

Tile Full Pages option 49, 62

Tile Imageable Areas option 62 tiling 59, 61

Tint Reduction value 734 title bar 8 tool pointers 16 toolbox 14 tools. See individual tool names

TOYO Color Finder-1050 316 tracing artwork 138 tracking 452

Transform Each command 163, 206, 216

Transform Pattern Tiles option 153 transformation tools 198, 199 transforming objects 200 type 467 transposing colors in gradient fills 354 data in graphs 546

Transverse option 760 trap by overprinting 736–740 creating 725–740 defined 725 horizontal and vertical 733 paper stretch 733 reverse 735

853

E similar color densities 732 type 730 with tints 729

Trap command 732

Trim filter 253

Trim Marks filter 666–667, 741 troubleshooting 796–822 anchor points 801 anchor points jump 802 banding 806 blank pages 803 blends 806 center point 820 custom colors 809 drawing paths 810 error messages 779–795 filled object 813 gradient fills 806 graphs 815 letters 804

Make Wrap command 814 object disappears 807 objects drawn at angle 808 outline stroke and offset path 821 overlapping objects 822 patterns 809 print 811

QuickDraw printer 812 screen display is blank 805 stroked shapes 804

TrueType fonts 446

TRUMATCH color swatching 319

Twirl filter 235

854

E twirl plug-in tool 235 type along a path 434–438 area type 419, 431 as graphic objects 469 choosing a font family 442 containers, linking and unlinking 477–483 deleting empty paths 439 entering 420–438 greeking 490 hyphenating 513 importing 469 in a rectangle 425, 426 in an object 431 indenting 492 moving along a path 436 painting 466 path type 419 point type 419 selecting 422 setting attributes 440–460 size 444–462 spacing 500, 503, 507 transforming 467 trapping 730 wrapping around graphic objects 487

Type 1 fonts 446 type tool 17, 420

Undo command 26 ungrouping objects 190

Uniform Scaling option 214

855

E unit of measure 46 unit values, converting 48

Unite filter 251, 683 units arithmetic, using 48

Unlink Blocks command 482

Unlock All command 196

Use Page Setup option 58

V vector graphics 4–7, 627 bitmap images 243 converting into 243 vertical shift. See baseline shift viewing actual size 41

Artwork 34 custom 42 entire document 41 layers 411 magnified 39 multiple windows 44 patterns 36 placed images 36

Preview 34

Preview Selection 35 reduced 39

VM error (virtual memory error) 686

W windows fitting documents in 42 opening a new 44

Windows bitmap file format (BMP) 646

856

World Wide Web. See Adobe Home Page

x and y axes constraining 168 rotating 168

Zigzag filter 331 zoom tools 17, 18, 39 zooming 39–41

857

File and Edit menus

File

New

Open…

Save

Save As…

Revert to Saved

Place…

Import Styles…

Import Text…

Document Setup…

Separation Setup…

Document Info…

Page Setup…

Print…

Preferences

Quit

Preferences

General…

Color Matching…

Hyphenation Options…

Plug-ins…

Edit

Undo

Redo

Cut

Copy

Paste

Clear

Select All

Select None

Paste In Front

Paste In Back

Publishing

Show Clipboard

Publishing

Create Publisher…

Subscribe To…

Publisher Options…

Show Borders

Arrange and View menus

Arrange

Repeat Transform

Move…

Bring To Front

Send To Back

Transform Each…

Group

Ungroup

Lock

Unlock All

Hide

Show All

View

Preview

Artwork

Preview Selection

Hide Template

Show Rulers

Hide Page Tiling

Hide Edges

Hide Guides

Zoom In

Zoom Out

Actual Size

Fit In Window

New View…

Edit Views…

Object menu

Object

Paint Style…

Custom Color…

Pattern…

Gradient…

Attributes…

Join…

Average…

Expand…

Apply Knife

Rasterize…

Guides

Masks

Compound Paths

Cropmarks

Graphs

Cropmarks

Make

Release

Guides

Make

Release

Lock

Masks

Make

Release

Compound Paths

Make

Release

Graphs

Style…

Data…

Design…

Column…

Marker…

Font and Type menus

Font

Chicago

Courier

Frutiger

Geneva

Helvetica

Helvetica Narrow

Lucida

Lucida Sans

Minion

Minion Expert

Monaco

Myriad MM

New York

Palatino

Symbol

Times

Zapf Dingbats

Type

Size

Leading

Alignment

Tracking…

Spacing…

Character…

Paragraph…

Link Blocks

Unlink Blocks

Make Wrap

Release Wrap

Fit Headline

Create Outlines

Export…

Check Spelling...

Smart Punctuation…

Find…

Rows & Columns…

Find Font…

Change Case…

Filter menu

Filter

Last Filter

Colors

Create

Distort

Ink Pen

Objects

Other

Pathfinder

Select

Stylize

Colors

Adjust Colors…

Blend Front to Back

Blend Horizontally

Blend Vertically

Invert Colors

Overprint Black…

Saturate…

Create

Fill & Stroke for Mask

Object Mosaic…

Trim Marks

Distort

Free Distort…

Punk and Bloat…

Roughen…

Scribble and Tweak…

Twirl…

Zig Zag…

Ink Pen

Edit…

Effects…

Filter menu, continued

Objects

Add Anchor Points

Cleanup…

Offset Path…

Outline Path

Pathfinder

Unite

Intersect

Exclude

Minus Front

Minus Back

Divide

Outline

Trim

Merge

Crop

Hard…

Soft…

Trap…

Options…

Select

Same Fill Color

Same Paint Style

Same Stroke Color

Same Stroke Weight

Select Inverse

Select Masks

Select Stray Points

Stylize

Add Arrowheads…

Calligraphy…

Drop Shadow…

Path Pattern…

Round Corners…

Other

Delete Riders…

Make Riders…

Window menu

Window

New Window

Hide Toolbox

Show Layers

Show Info

Show Paint Style

Show Gradient

Show Character

Show Paragraph

Show Tab Ruler

Show Align

Show Plug-in Tools

Show Control Palette

What’s New in Adobe Illustrator 6.0

Enhanced image support

Integration with other Adobe products

New tools and palettes

New filters and commands

Drag-and-drop support

Built-in color separation

Unit and value conversion in text boxes

About ink pen effects

Enhanced image support

The following features provide comprehensive support for importing and editing images:

• Expanded File Format Support. You can now open or place files in many formats, including Adobe Illustrator 1,

88, 3, 5 and 6; TIFF; PostScript; EPS; the

Adobe Portable Document Format (PDF);

PICT; Adobe Photoshop 2.5 or later; and any file format supported by an Adobe

Photoshop plug-in module.

• Photoshop Filters.

Adobe Photoshopcompatible filters can be applied to any imported image or Adobe Illustratorgenerated artwork that has been rasterized (converted to pixel-based artwork).

You can blur an image by selecting it and applying the Radial Blur filter, without leaving the Adobe Illustrator program.

Version 6.0 includes 12 filters from

Adobe Gallery Effects: Accented Edges,

Bas Relief, Fresco, Glass, Grain, Halftone

Screen, Mosaic, Patchwork, Rough

Pastels, Spatter, Stamp and Sumi-e.

In addition, the complete Gallery Effects collection is included on the Deluxe

Edition CD-ROM.

• Rasterizing Objects.

Anything created in Adobe Illustrator can be instantly

“rasterized,” that is, turned into pixelbased artwork, at a specified resolution.

• Colorizing 1-bit Images.

The black portions of 1-bit images imported into

Adobe Illustrator can be colorized using any color, from a CMYK combination to a spot color from a color matching system such as Pantone

. The white area of the image always appears transparent.

Integration with other

Adobe products

Adobe Illustrator 6.0 is integrated with the following products:

• Adobe Fetch

Adobe Illustrator files can save previews for use in Adobe

Fetch, a software utility used for cataloging those images.

• Adobe Acrobat.

Version 6.0 has the ability to open, edit and save files in version 1.1 of the Adobe Portable

Document Format (PDF).

• Adobe PageMaker

Double-clicking a placed Adobe Illustrator file within the

Adobe PageMaker 6.0 program launches

(or switches to) Adobe Illustrator, with thatfile open and ready for editing.

Saving the file in Adobe Illustrator automatically updates the file within

PageMaker.

• Adobe Photoshop. You can drag and drop selected objects between the

Adobe Photoshop 3.0.4 (or later) and

Adobe Illustrator 6.0 programs, from a document window in one program to a document window in the other.

New tools and palettes

Additions and enhancements include the following:

• New plug-in tools with special functions now appear on a floating tool palette. The star, polygon, spiral, and twirl tools replace the Star, Polygon,

Spiral, and Twirl filters in previous versions. The knife tool cuts apart objects as you drag, providing an intuitive way to divide several overlapping paths. Third-party plug-in developers can easily add tools to the plug-in tool palette or create palettes of their own.

• The eyedropper tool can precisely sample pixel colors within images from any application. For example, you can sample colors from images that appear in an Adobe Illustrator document, in an

Adobe Photoshop window, or on the desktop.

• The Control palette shows the location, width, and height of selected objects, and lets you edit the objects by changing the values in these fields. You can also enter values to change the rotation and scaling of selected objects.

• The Align palette combines features of the Align and Distribute filters from the previous versions of Adobe Illustrator. The new palette displays various options for aligning and placing objects along the axis you specify.

• The Shortcuts palette displays quick-reference information about the tools and keyboard shortcuts available in Illustrator.

New filters and commands

Version 6.0 offers the following additions and enhancements:

• The Path Pattern filter lets you place patterns along paths, a unique method for creating borders, frames, distinctive shapes, and graphic design elements.

The patterns generated are fully editable vector artwork. For example, a pattern applied to a path can be painted, resized, and transformed just as can other Adobe Illustrator artwork.

• The Ink Pen commands let you create and modify special patterns, called hatch styles , and apply them to filled shapes, giving the appearance of an ink pen drawing.

• The Clean Up Artwork filter gives you several options for making artwork less

“messy” and more efficient, including the selection and removal of stray points, removal of unpainted objects and removal of empty text paths.

• The Zig Zag filter adds anchor points to an existing path and offsets these points to create either a wavy or jagged line effect.

• The Transform Each filter combines

Move Each, Rotate Each, and Scale Each into one filter, accessed now from the

Arrange menu. This new filter lets you move, rotate, and scale each object in a selection according to specified or random values.

• The Saturate filter combines the

Saturate, Saturate More, Desaturate, and Desaturate More filters. This new filter lets you darken or lighten the colors of selected objects by specifying percentages.

• The Expand command converts patterns and gradients into paths.

Drag-and-drop support

You can move copies of objects in

Adobe Illustrator 6.0 by dragging them from one document window to another, or between a document window and the desktop. You can drag and drop objects between Adobe

Illustrator and any application that supports Macintosh Drag Manager, such asAdobe Photoshop or the Scrapbook.

You can also drag and drop objects from Adobe Illustrator to Adobe

PageMill

™

Built-in color separation

You can now print color separations from within Adobe Illustrator. The functionality of Adobe Separator

™

, the color separation utility that shipped with previous versions of the program, is incorporated into the Separation Setup dialog box in Illustrator.

Unit and value conversion in text boxes

You can enter values using any unit of measure, or any arithmetic expression, into a numeric text box. Version 6.0 automatically calculates the value of arithmetic expressions, and converts all units to the preset unit. For example, if you enter “1 in + 1 cm” into a text field set to points, Illustrator converts the entry to 100.346 points.

About Ink Pen Effects

The Ink Pen Effects filter creates textured gradations such as crosshatching and irregular random textures such as wood grains that you can apply to artwork to simulate the look of an ink pen drawing. The Ink Pen Effects filter converts a selected object into a mask, and then draws lines or shapes behind it.

The shapes created by the Ink Pen

Effects filter are objects and can require significant program memory. Thus, consider applying ink pen effects as the last step in creating your artwork: lay out the entire drawing and paint it as desired. Then apply the ink pen effects.

The hatch (or hatch style ) is the design element of the ink pen effect. The particular options associated with a hatch are called hatch settings . You can select from hatch settings supplied with the

Adobe Illustrator program using the Ink

Pen Effects dialog box.

You can also create your own ink pen designs by drawing or selecting an object, naming it as a hatch in the Ink

Pen Edit dialog box, and then applying it to artwork using the Ink Pen Effects dialog box.

Applying an ink pen effect

To apply an ink pen effect to a selected object, you choose a hatch setting and its associated hatch style, modify the settings if desired, and apply them through the Ink Pen Effects dialog box.

The Ink Pen Effects dialog box lets you control the hatch’s spacing or number of elements (called density ), its uniformity

(called dispersion ), the line thickness (or stroke weight ), the angle at which the hatch is applied (called rotation ), and the size of the hatch (called its scale ).

In addition, you can select different paint attributes for the hatch, including its shape, color, how the cross-hatching pattern fades, and the angle of the fading.

Original hatch

Low value

Density

High value

Dispersion

Rotation

Scale

Thickness

Hatch concentration and direction

To fill an object with an existing ink pen hatch:

1 Select the object you want to fill with a hatch.

2 Choose Filter

Ink Pen

Effects.

3 Select a hatch setting, choosing from the following options:

• Choose a setting from the Settings pop-up menu to load a set of predefined options. Each setting has different hatch styles associated with it.

• To import an existing group of hatch settings, click Import, locate the settings, and click Open.

4 To adjust the number of hatch elements applied to the selection, drag the

Density slider or enter values in the text box. To intensify the effect, click a gradation within the density adjustment bar to the right of the preview box.

5 To specify whether to apply the hatch uniformly, in a pattern, or to not apply the option, choose from the Dispersion,

Thickness, Rotation, or Scale pop-up menu, as follows:

• None deselects the option.

• Constant applies the effect evenly.

If you select this option, no range is available.

• Linear increases the effect progressively.

• Reflect varies the effect from the center of the object outward.

• Symmetric varies the effect proportionately and evenly, for example, if applying hatches to round or cylindrical shapes.

• Random applies the effect irregularly.

6 If you chose an option in step 6, enter an angle along which to apply the effect using the dial or by entering a value from 0 to 300 in the text boxes.

Then drag the slider or enter values in the text boxes to specify a range, as follows:

• Dispersion, which controls the spacing of hatch elements, ranges from

0 to 300.

• Thickness, or stroke weight, of the hatch elements ranges from 10% to

1000%. (This option is dimmed if the selection is unstroked.)

• Rotation, which sets the angle at which the hatch elements are applied, ranges from –180 degrees to +180 degrees.

• Scale, which sets the size of the hatch elements, ranges from 10% to 1000%.

7 When you have finished adjusting the settings, if you want to replace (save) the selected setting with your adjustments to it, click Update.

8 Choose from the following Paint Style options for the hatch:

• To select another design element for the hatch, choose from the Hatch Style menu. The hatch you select uses the current settings.

• To specify a color for the hatch, choose from the Hatch Color pop-up menu: Original to retain the current hatch fill; or Match Fill to match the hatch fill to the selection’s fill. (Do not choose the Match Fill option if the selection is filled with a pattern.)

• To specify the selection’s fill color, choose from the Background pop-up menu: Retain Fill to apply the hatch in its original color on top of the object’s fill color, or Hatch Only to remove the fill from the object.

• To specify whether the hatch fades across the object, choose from the Fade pop-up menu: None for no fade; To

White to fade the hatch to white; To

Black to fade the hatch to black; or Use

Gradient if the object is filled with a gradient and you want that gradient to define the fade’s direction and colors.

• If you chose a fade option, enter an angle for the fade in the Fade Angle text box.

9 When you have finished adjusting the hatch options, click OK to apply the hatch to your artwork.

Creating and saving hatches

You can create and save your own hatches or modify existing hatches and save them for reuse. Creating a hatch is similar to creating a tile for a pattern. To save hatches, you use either the Ink Pen

Edit or Ink Pen Effects dialog box.

You can work with hatches as described in the following procedures:

• To create a hatch

• To modify an existing hatch

• To save hatch settings

• To delete a hatch

To create a hatch:

1 Draw the objects you want to convert to a hatch design for the ink pen effect.

Select the artwork.

Choose Filter

Ink Pen

Edit.

4 Click New. Enter a name for the new ink pen hatch. Click OK.

5 To improve the program’s performance, deselect the Preview option to turn off the preview of the hatch.

6 Choose one of these options:

• To save the hatch, click OK again.

• To save the hatch for reuse with other documents, click Save As. Locate the file in which you want to save it or specify a new filename; then save the file. Any settings attached to the hatch also are saved.

7 Click OK.

To modify an existing hatch:

1 Make sure that nothing is selected in the artwork.

2 Choose Filter > Ink Pen > Edit.

3 Choose one of two options:

• Choose a hatch from the Hatch popup menu.

• Click Import, locate the hatch you want to modify, and click Open.

4 Click Paste. The hatch is pasted into the document. Click OK.

5 Edit the hatch as desired, and then select it.

6 Choose Filter > Ink Pen > Edit.

7 Click New. Name the new hatch.

Click OK.

8 Choose one of two options:

• To save the new hatch in the document, click OK again.

• To save the hatch for reuse in other documents, click Save As. Locate the file in which you want to save it as or specify a new filename; then save the file.

9 Click OK.

To save hatch settings:

1 Choose Filter

Ink Pen

Edit or

Effects.

2 Specify the hatch settings and any style options you want to save.

3 Choose from these options:

• To save the settings in the document, click New. Enter a new name for the settings and click OK.

• To save the settings separately for use in other documents, click Save As.

Locate the file in which you will save the settings or enter a new filename; then save the file. Any settings attached to the hatch also are saved.

4 Click OK.

To delete an existing hatch:

1 Choose Filter

Ink Pen

Edit.

2 Choose a hatch from the Hatch pop-up menu.

3 Click Delete.

Click OK.



Adobe Illustrator 6.0 User Guide

This manual, as well as the software described in it, is furnished under license and may only be used or copied in accordance with the terms of such license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Adobe Systems Incorporated.

Adobe Systems Incorporated assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.

Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording, or otherwise, without the prior written permission of Adobe Systems Incorporated.

Adobe, the Adobe logo, Acrobat, Adobe Dimensions,

Adobe Fetch, Adobe Illustrator, Adobe Illustrator 88, the

Adobe Illustrator logo, Adobe Photoshop, Adobe Separator, Adobe Streamline, Adobe Type Manager, ATM, Gallery Effects, Minion, PostScript, PrePrint, PressWise, and

TrapWise are trademarks of Adobe Systems Incorporated.

Frutiger, Helvetica, and Times are trademarks of Linotype-

Hell AG and/or its subsidiaries. Windows is a registered trademark of Microsoft Corporation. Apple, Macintosh, and Power Macintosh are registered trademarks of Apple

Computer, Inc. IBM is a registered trademark of International Business Machines Corporation. All other trademarks are the property of their respective owners.

Contains an implementation of the LZW algorithm licensed under U.S. Patent 4,558,302.

Graphics import and export filters copyright



1992

•Pantone, Inc.’s check-standard trademark for color reproduction and color-reproduction materials.

FOCOLTONE is a registered trademark of Focoltone, Ltd.

The concept, structure, and form of all FOCOLTONE material and intellectual property are protected by patent and copyright.

TRUMATCH, TRUMATCH SWATCHING SYSTEM,

TRUMATCH COLORFINDER, TRUMATCH SWATCHBOOK, and TRUMATCH COLORFINDER SOFTWARE are trademarks of TRUMATCH, Inc. TRUMATCH SWATCHING

SYSTEM, including the color identification numbers, is covered by patent pending and copyright protection.

Please remember that existing artwork or images that you may desire to scan as a template for your new image may be protected under copyright law. The unauthorized incorporation of such artwork or images into your new work could be a violation of the rights of the author.

Please be sure to obtain any permission required from such authors.

Written and designed at Adobe Systems Incorporated,

1585 Charleston Road, Mountain View, CA 94039-7900,

USA

Adobe Systems Europe Limited, Adobe House, Edinburgh

EH11 4DU, Scotland, United Kingdom

Adobe Systems Co., Ltd., Yebisu Garden Place Tower,

4-20-3 Ebisu, Shibuya-ku, Tokyo 150, Japan

For defense agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to restrictions set forth in subparagraph (c)(1)(ii) of the Rights in Technical

Data and Computer Software clause at 252.227-7013.

For civilian agencies: Restricted Rights Legend. Use, reproduction, or disclosure is subject to restrictions set forth in subparagraphs (a) through (d) of the commercial Computer Software Restricted Rights clause at 52.227-19 and the limitations set forth in Adobe’s standard commercial agreement for this software. Unpublished rights reserved under the copyright laws of the United States.

(12/95)

How to use this guide

In the toolbar

Page Back/Forward Go Back/Forward

Click to move to your previous location.

On the page

Contents

Click to jump to opening screen of this guide.

Parent topic

Click to jump to main topic.

Index

Click any Red text to jump to information on that topic.

Здравейте! Аз съм AI чатбот, специално обучен да ви помага с Adobe ILLUSTRATOR 6.0 Online Manual. Аз съм прегледал подробно документа и мога да ви помогна да намерите точната информация, която ви е необходима, или да обясня съдържанието на ясен и прост език. Независимо дали търсите насоки за конкретни функции, стъпки за отстраняване на неизправности или обща употреба, не се колебайте да задавате своите въпроси. Колкото повече подробности предоставите за вашите притеснения или нужди, толкова по-точно и ефективно мога да ви помогна!

Асистентът пише

Асистентът не е на клавиатурата. Моля, опитайте отново по-късно.