mee audio MX PRO Faceplate Design Template Template

When designing your faceplates, please keep in mind that black is what will be engraved and white is not (unless stated otherwise).

1. Make sure all designs are in the “Artwork” layer.

2. Choose your plate style (positive or negative).

3. Place artwork within the faceplate guidelines.

4. Make sure your artwork is positioned and sized to your liking.

5. If you have text, please convert them to outlines.

- Highlight the text and go to Type > Create Outlines.

6. Designs must be vectors when using this template, otherwise, please use

the customizer to upload images.

7. Check your design (make sure it follows the Artwork Guidelines listed

on pro.meeaudio.com.

8. Save and send to [email protected]. Please include your order number.