Advertisement
Advertisement
SRP-2411
User Guide
High Definition
Digital Satellite Receiver
Personal Video Recorder
Common Interface
TOPFIELD
ii CONTENTS
Contents
ii
1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1
Controlling the digital receiver
. . . . . . . . . . . . . . . . . .
2
. . . . . . . . . . . . . . . . . . . . . . . .
3
. . . . . . . . . . . . . . . . . . . . . .
4
. . . . . . . . . . . . . . . . . . . . . . . . .
6
8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
. . . . . . . . . . . . . . . . . . . . . . . . .
8
. . . . . . . . . . . . . . . . . . . . . .
10
Connecting up your digital receiver
. . . . . . . . . . . . . . .
12
. . . . . . . . . . . . . . . .
12
Connecting to your television set
. . . . . . . . . . . .
13
Connecting to your video recorder
. . . . . . . . . . .
16
Switching on for the first time
. . . . . . . . . . . . . . . . . .
17
19
Searching for broadcasting services
. . . . . . . . . . . . . . .
19
. . . . . . . . . . . . . . . .
20
Configuring DiSEqC 1.2 settings
. . . . . . . . . . . .
22
. . . . . . . . . . . . . . .
23
. . . . . . . . . . . . . . . . . .
25
CONTENTS iii
. . . . . . . . . . . . . . . . . . . . . . . . .
28
. . . . . . . . . . . . . . . . . . .
29
. . . . . . . . . . . . . . . . . . .
30
. . . . . . . . . . . . . . . . . . . . .
30
. . . . . . . . . . . . . . . . . . . . .
32
33
. . . . . . . . . . . . . . . . . . . . . . . . .
33
. . . . . . . . . . . . . . . . . . . . . .
33
. . . . . . . . . . . . . . . . . . . . .
34
. . . . . . . . . . . . . . . . . . . . .
34
. . . . . . . . . . . . . . . . . . . . . .
34
. . . . . . . . . . . . . . . . . . . . .
35
. . . . . . . . . . . . . . . .
35
. . . . . . . . . . . . . . . . . .
36
. . . . . . . . . . . . . . . . . . . . . . .
37
. . . . . . . . . . . . . . . . . . .
37
. . . . . . . . . . . . . . . . . . . . . . . .
38
. . . . . . . . . . . . . . . . . . . . . . . . .
38
. . . . . . . . . . . . . . . . . . . . . . . . . .
41
To use MediaHighway programme guide
. . . . . . . . . . .
42
. . . . . . . . . . . . . . . . . . . . . . .
43
. . . . . . . . . . . . . . . . . . . . . . .
44
. . . . . . . . . . . . . . . . . .
45
. . . . . . . . . . . . . . . . . . .
46
. . . . . . . . . . . . . . . . . . . .
47
48
. . . . . . . . . . . . . . . . . . . . . . . . . .
48
. . . . . . . . . . . . . . . . . . . . . . . .
48
. . . . . . . . . . . . . . . . . . . . . .
48
. . . . . . . . . . . . . . . .
50
. . . . . . . . . . . .
51
. . . . . . . . . . . . . . . . . .
53
. . . . . . . . . . . . . . . . .
53
. . . . . . . . . . . . . . . . . . . . . .
53
iv CONTENTS
Viewing electronic programme guide
. . . . . . . . . . . . . .
53
. . . . . . . . . . . . . . . . .
54
. . . . . . . . . . . . . . . . . . . . . . . . . .
55
57
. . . . . . . . . . . . . . . . . . . . . .
57
. . . . . . . . . . . . . . . . . . . . .
59
. . . . . . . . . . . . . . . . .
61
62
. . . . . . . . . . . . . . . . . . . . .
63
. . . . . . . . . . . . . . . . . . . . .
63
. . . . . . . . . . . . . . . . . . . . . .
65
Scheduling recordings using the programme guide
. .
68
Recording a time-shifted programme
. . . . . . . . . .
68
Recording a pay service programme
. . . . . . . . . .
69
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
69
. . . . . . . . . . . . . . . . . . .
70
. . . . . . . . . . . . . . . . . . . . .
70
. . . . . . . . . . . . . . . . . . . .
70
. . . . . . . . . . . . . . . . . .
71
. . . . . . . . . . . . . . . . . . .
71
To move a recording to another folder
. . . . . . . . .
71
. . . . . . . . . . . . . . . . . . . . .
71
To navigate using the progress bar
. . . . . . . . . . .
72
. . . . . . . . . . . . . . . . . .
73
. . . . . . . . . . . . . . . . . . .
73
. . . . . . . . . . . . . . . . . . .
73
To play back a recording repeatedly
. . . . . . . . . .
74
To play back recordings in sequence
. . . . . . . . . .
74
To play back a scrambled recording
. . . . . . . . . . .
75
. . . . . . . . . . . . . . . . . . . . . . . .
76
. . . . . . . . . . . . . . . . . . . . . . .
76
. . . . . . . . . . . . . . . . . . . . .
77
78
CONTENTS v
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
78
. . . . . . . . . . . . . . . . . . . . . .
80
. . . . . . . . . . . . . . . . . . . . .
80
. . . . . . . . . . . . . . . . . . . . . . . . . . .
81
. . . . . . . . . . . . . . . . . . . . . . . .
81
. . . . . . . . . . . . . . . . . . . . . .
86
87
. . . . . . . . . . . . . . . . . . . . . .
88
To access within the local area network
. . . . . . . . .
88
. . . . . . . . . . . . . . . .
89
Configuring the network setting on the digital receiver
. . . .
90
. . . . . . . . . . . . . . . . . . . . .
91
. . . . . . . . . . . . . . . . . . . . .
93
96
. . . . . . . . . . . . . . . . . . . . . . .
96
10.2 From the firmware server via the Internet
. . . . . . . . . . .
97
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
98
99
A.1 Code list for television sets
. . . . . . . . . . . . . . . . . . . . 102
. . . . . . . . . . . . . . . . . . . . . 116
A.3 Code list for audio-video receivers
. . . . . . . . . . . . . . . 118
120
1
Chapter 1
Introduction
1
The SRP-2411 digital receiver is fully compliant with the international Digital Video Broadcasting (DVB) standard, and thus is able to receive digital broadcasts of that standard. For its operation you need an antenna, which must be installed appropriately.
NOTE
In general we equate a channel with a frequency. However, unlike analogue broadcasts, digital broadcasts are not all assigned to their own frequencies; instead, multiple television broadcasts are transmitted through a single frequency.
The frequency in digital broadcasting is usually called transponder or multiplex. To reduce confusion in this manual, the word service is preferably used than channel as a term to indicate one television or radio broadcast.
1.1
Features
This digital receiver has the following features:
• Supports DiSEqC 1.0, DiSEqC 1.1, DiSEqC 1.2 and US-
ALS protocols.
2 Introduction
• Can store up to 10 , 000 television and radio services.
• You can edit the services list.
• Can create lists of your favourite services.
• Can view information about the current television or radio programme.
• Has an electronic programme guide that provides an overview of scheduled programmes.
• You can record one service while you are currently watching another.
• You can record many programmes using a built-in hard drive with large storage capacity.
• Time-shift is a special technical feature available on this digital receiver. You can pause a programme you are watching and resume it again at a later time. Then you can quickly go to any part of the current programme by fast forward or rewind search.
• If you have an external hard drive connected to the digital receiver via the USB or eSATA port, you can record television programmes into it.
• You can play back video files of various formats including DivX.
• You can play a built-in network game with other users via the Internet.
1.2
Controlling the digital receiver
You can operate the digital receiver with the remote control or the buttons on the front panel.
NOTE
When the digital receiver is off but plugged into a wall socket, we say that it is in standby mode; on the other hand, when it is on, it is in active mode. Even when you are not using the digital receiver, you should keep it plugged into
1.2 Controlling the digital receiver 3 a wall socket to be in standby mode so that it can run timer events at any time.
1.2.1
Front panel
The front panel of the digital receiver has buttons to control the digital receiver, specific lights and a display to indicate its status. The following indicates what they mean.
1 button switches the digital receiver between standby mode and active mode.
Front display shows the current time in standby mode, and displays the current service in active mode.
CH c , a buttons switch to the previous or next service.
VOL b , d buttons decrease or increase the volume.
4 Introduction
1.2.2
Remote control
41
.
1
.
.
button switches the digital receiver between standby mode and active mode.
.
2
.
.
mutes the sound. Press again to switch it back on.
.
3
.
.
TV switches the remote control to television mode to operate your television.
.
4
.
.
PVR switches the remote control to receiver mode to operate the digital receiver.
.
5
.
.
AUX switches the remote control to operate your audio-video receiver.
.
6
.
.
DVD switches the remote control to DVD mode to operate your DVD player.
.
7
.
.
Numeric buttons are used to enter a service number for service change or to specify values for menu options.
.
8
.
.
switches over between the current service and the previously viewed one.
.
9
.
.
displays the service information box. It is also used
.
to display more information about a programme.
.
.
VOLUME
− , VOLUME + buttons decrease or increase the volume.
.
.
.
CHANNEL − , CHANNEL + buttons switch to the previous or
1.2 Controlling the digital receiver 5
.
next service.
.
12 OK
displays the services list. See § 5.2.1
for more details.
It is also used to select a menu item.
.
.
Navigation buttons are used to navigate in menus or to
.
change values for menu options.
.
.
.
MENU displays the main menu. It is also used to return to
.
the previous menu from a submenu.
.
.
.
GUIDE displays the electronic programme guide.
.
.
EXIT is used to exit a menu or to hide on-screen information.
is used to display the list of recorded programmes that are stored in the internal hard drive. See §
for more
.
.
details.
.
F1 has different functions per menu.
.
.
F2 is used to make a bookmark on playback or time-shift.
F4 is used to edit a recording.
.
.
F3 is used to jump to next bookmark position.
.
.
Option has different functions per menu.
is used to select a subtitle track.
is used to select an audio track and a sound mode, or
.
.
.
a video track of multifeed programme.
.
displays teletext.
.
26 VF
changes video resolution. See § 4.2.1
for more details.
.
.
27 AR changes aspect ratio. See §
for more details.
switches over between television services and radio services.
is used to set a sleep timer in 10 minute increments.
is used to start recording.
is used to stop playback, to stop recording, or to jump back to live television from time-shifted television.
1
6 Introduction
.
.
.
.
.
.
.
.
32 M switches the output of the TV SCART socket over between the digital receiver and the device connected to the
.
VCR
for more details.
.
33 SAT displays the satellites list with their services list.
is used to start reverse playback. Subsequent presses increase the rewind speed.
pauses live television or playback of a recorded programme.
is used to start fast forward playback. Subsequent
presses increase the playback speed.
is used to jump back to the beginning of the recording
on playback.
is used to start slow motion playback. Subsequent
presses change the playback speed.
is used to jump to the end of the recording on playback.
has different functions per menu.
NOTE
When using the remote control, point it at the remote sensor on the front panel of the digital receiver.
1.3
Common Interface
There are pay TV services available; these are accessible with the use of a Conditional Access Module
(CAM) and a subscription card. A Common Interface (CI) is the slot into which you can insert a CAM.
The front of the digital receiver has two common interface slots. To watch a pay service, you should take the following steps:
1.3 Common Interface 7
1. Purchase a CAM and a subscription card for the pay service you want to watch.
2. Insert the subscription card into the CAM.
3. Insert the CAM into a common interface on the front of the digital receiver.
To view the information about the module and subscription card which is inserted into the digital receiver, select the Information > Common Interface menu.
1
8 Setup
Chapter 2
Setup
2.1 Unpacking
Before going any further, check that you have received the following items with the digital receiver.
• Remote control
• Two batteries for the remote control (AAA 1.5 V)
• One HDMI cable
• A copy of this user guide
NOTE
Accessories may vary according to your local area.
2.2
Safety precautions
Please read carefully the following safety precautions.
• The mains voltage must range between 90 and 250 volts.
Check it before plugging the digital receiver to the wall socket. For the power consumption of the digital receiver, refer to Table
2.2 Safety precautions 9
• The wall socket should be near the equipment. Do not run an extension lead to the unit.
• The mains plug shall remain readily operable so that it can be removed easily to disconnect the power.
• The digital receiver shall not be exposed to dripping or splashing water, and no objects filled with liquids, such as vases, shall be placed on it.
• Do not expose the digital receiver to any moisture. The digital receiver is designed for indoor use only. Use dry cloth to clean the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digital receiver. When placed in a cabinet, make sure there is a minimum space of 10 centimetres around it. For the physical specification of the digital receiver, refer to Table
• Protect the power cord from being walked on or pinched.
If the cord is damaged, do not use the digital receiver and get the cord replaced.
• Never open the digital receiver casing under any circumstances, or the warranty will be void.
• Refer all servicing to a qualified service technician.
Table 2.1: Power specification
Input voltage 90 to 250 V AC, 50/60 Hz
Power consumption 60 W at maximum in active
Under 1 W in passive standby
2
10 Setup
Table 2.2: Physical specifications
Size
Weight
Operating temperature
430 × 60 × 265 mm
3.1 kg
0 to 45
◦
C
Storage relative humidity 5 to 90 %
2.3
Rear panel connections
The SRP-2411 has a wide range of connections on the back.
Check what connections your television set has in comparison with the digital receiver.
.
.
1
.
LNB 1 IN Satellite broadcasting signal input socket for the first tuner
(Current: Max.500mA with overload protection)
.
.
2
.
LNB 1 OUT Satellite broadcasting signal output socket through the first tuner
.
.
3
.
LNB 2 IN Satellite broadcasting signal input socket for the second tuner
.
.
4
.
LNB 2 OUT Satellite broadcasting signal output socket through the second tuner
.
.
5
.
VIDEO Composite video output socket for the television set (yellow)
.
.
6
.
AUDIO L/R Stereo audio output socket for the television set or the audio-video receiver (white/red)
.
.
7
.
Y/Pb/Pr Component video output socket for the television set (green/blue/red)
2.3 Rear panel connections 11
.
8
.
.
TV Audio and video output socket for the television set
.
9
.
.
VCR Audio and video input/output socket for another device such as a video recorder
.
.
.
HDMI Audio and video output socket for the high definition television set
.
.
.
eSATA eSATA port for connection to an external hard drive
.
.
.
.
LAN
.
.
USB
Local area network port
USB port for firmware update and data transfer
.
.
.
S/PDIF COAXIAL Coaxial-type digital audio output socket
.
for the audio-video receiver
.
.
S/PDIF OPTICAL Optical-type digital audio output socket for the audio-video receiver
.
.
.
ON/OFF Power switch (You have to turn on this switch first to use this digital receiver.)
Table 2.3: Connectors specifications
HDMI
YPbPr
TV
VCR
High definition video output
Digital audio output
Component video output
CVBS/S-Video/RGB video output
Left & right audio output
CVBS video output
Left & right audio output
CVBS/S-Video/RGB video input for bypass
Left & right audio input for bypass
VIDEO Composite video (CVBS) output
AUDIO Left & right audio output
S/PDIF Digital audio output
LAN
USB eSATA
10/100 Ethernet
2.0 Host (5 V DC, 500 mA)
External SATA 2.0
2
12 Setup
2.4
Connecting up your digital receiver
There are several ways to set up the digital receiver. Set up the digital receiver suitably to your television and other devices.
If you have any problem with your setup or need help, contact your dealer.
2.4.1
Connecting to the antenna
Whatever sort of connection you have between the digital receiver and the television, you need to connect the digital receiver to the antenna so that it can receive digital television broadcasts.
Connect the antenna cable to the LNB 1 IN connector on the back panel of the digital receiver.
Also, you must ensure that there is a connection to both the LNB 1 IN and LNB 2 IN connectors on your digital receiver, so that both tuners work properly.
Normally you do that by using a loop cable to link from the
LNB 1 OUT connector to the LNB 2 IN connector.
If you have two antennas without DiSEqC switch, then you have to connect the cable from the other antenna directly to the LNB 2
IN connector rather than using the loop cable.
NOTE
The digital receiver can supply a current of 500 milliampere at maximum for antenna devices including LNB, DiSEqc switch and antenna rotor through each antenna input connection separately but not simultaneously. If there are too many antenna devices to be simultaneously supplied with sufficient power for a rather long time through the antenna input connections, then your antenna may lack power to operate. So it is recommended to link the LNB 1 OUT connector
2.4 Connecting up your digital receiver 13 to the LNB 2 IN connector with a loop cable, even though the digital receiver is designed to operate independently over two antennas.
NOTE
Perhaps you are expecting that the satellite antenna could simultaneously catch all frequencies coming from a satellite and send them to the digital receiver. However, the satellite antenna only sends the frequencies that it can catch with the
LNB frequency and polarisation specified by the digital receiver. So if you have linked from the LNB 1 OUT connector to the LNB 2 IN connector, you would have some limitations in using some features such as dual recording. Likewise, if you have another digital receiver linked from the LNB 2 OUT
connector, you can only use it limitedly. See § 3.1
for more details.
2.4.2
Connecting to your television set
For all the following connections of the digital receiver, we recommend you to use the first connector to get the best picture quality. If your television does not have a matching connector, then use the next connector in the following order for a better picture quality.
1. HDMI connector ( HDMI )
2. Component connector ( YPbPr )
3. SCART connector ( TV )
4. Composite connector ( VIDEO )
You should configure audio and video settings after connect-
ing up the digital receiver. See § 4.2
for a detailed description.
2
14 Setup
To use the HDMI output
If you have a high definition television set, you should use an HDMI cable for best results. Plug one end of the cable into the HDMI socket on the digital receiver, and plug the other end into the matching socket on your television.
In this case, you do not have to make audio connection because it can output stereo audio or digital audio as well.
To use the SCART output
For best results with a standard television set, you should use a SCART cable. Plug one end of the cable into the TV socket on the digital receiver, and plug the other end into a free
SCART socket on your television.
If you connect with a standard SCART cable, you do not have to make audio connection because it can output stereo audio as well. But if you use a conversion cable such as SCART-to-
Component, then you have to make audio connection.
NOTE
You cannot view high definition video by means of the
SCART output.
2.4 Connecting up your digital receiver 15
To use the Component video output
Y
Pb
Pr
You need to obtain a Component video cable (RCA cable) to use the Component video output. Plug one ends of the cable into the Y
(green), Pb (blue) and Pr (red) sockets on the digital receiver, and plug the other ends into the matching sockets on your television.
NOTE
When connecting with the Component video cable, remember to also plug in the additional white and red audio cables from the digital receiver to the back of your television.
To use the Composite video output
You need to obtain a Composite video cable
(RCA cable) to use the Composite video output. Plug one end of the cable into the VIDEO
(yellow) socket on the digital receiver, and plug the other end into the matching socket on your television.
NOTE
You cannot view high definition video by means of the Composite video output.
2
16 Setup
To make the audio connection
You need to obtain an audio cable (RCA cable) to link the audio connectors. Plug one ends of the cable into the AUDIO L (white) and AUDIO R (red) sockets on the digital receiver, and plug the other ends into the matching sockets on your television or audio-video receiver.
To enjoy Dolby Digital audio, your television or audio-video receiver must be able to decode Dolby Digital audio, and you need to obtain an S/PDIF cable.
If you want to use the COAXIAL connector, prepare a coaxial S/PDIF cable (RCA cable); otherwise to use the OPTICAL connector, prepare an optical S/PDIF cable.
Plug one end of the cable into the S/PDIF socket on the digital receiver, and plug the other end into the matching socket on your audio-video receiver.
2.4.3
Connecting to your video recorder
The digital receiver can also output video through an auxiliary
SCART connector to another device such as a video recorder.
You need to obtain a SCART cable to link the auxiliary SCART connector. Plug one end of the cable into the VCR socket on the digital receiver, and plug the other end into the matching socket on your video recorder or suchlike.
2.5 Switching on for the first time 17
2.5
Switching on for the first time
Now that you have your digital receiver connected, you should plug it into a wall socket. Ensure that your television set is turned on and on the correct video channel so that you will be able to see the display from the digital receiver.
Before switching on the digital receiver, you should insert batteries into the remote control. Open the battery compartment by removing the lid, and then insert the batteries observing the polarity, which is marked on the base of the battery compartment.
Press the button on the top left corner on the remote control. In a little time, you may see a picture displaying a menu.
If you do not see a picture, try pressing the button on the remote control. If after several tries you still get no picture, check that the television is set to the correct input. If the picture is good, you can skip to §
to search for available television and radio services. Otherwise, you may need to temporarily connect the Composite video connector ( VIDEO ) to your television set so that you can see the menu in order to configure the video settings.
CAUTION
If the digital receiver no longer reacts properly to the remote control commands, the batteries may be flat. Be sure to replace only with 1.5 V AAA size batteries, and observe the following precautions.
• Do not mix different types of batteries, or new and old batteries.
• Do not use rechargeable batteries.
• Do not recharge the old batteries.
• In order to avoid any risk of explosion, observe the polarities indicated inside the battery compartment.
2
18 Setup
• Do not subject to excessive heat such as the sun and fire.
• If you are not using the remote control for a long period of time, remove the batteries. The manufacturer accepts no liability for the damage resulting from leaking batteries.
• Batteries, including those which contain no heavy metals, may not be disposed with other household wastes. Please dispose of used batteries in an environmentally sound manner. Find out the legal regulations which apply in your area.
19
Chapter 3
Service Search
3
After connecting up the digital receiver, you will need to perform a service search.
NOTE
If there is no service stored, you will be not able to access all menus. A is another name for a .
3.1
Searching for broadcasting services
This digital receiver can be operated with both fixed antenna and motorized antenna. You have to configure antenna settings according to your antenna system in the following order:
1. Configure LNB settings. Refer to § 3.1.1
.
2. Set the position of your desired satellites if you have a motorized antenna. You can control the antenna in DiS-
EqC 1.2 mode or USALS mode. Refer to § 3.1.2
for DiS-
EqC 1.2, and refer to §
for USALS.
3. Perform a service search.
20 Service Search
3.1.1
Configuring LNB settings
There are two large frequency bands for satellite broadcasts.
One is C band which ranges approximately from 4 to 6 GHz.
The other is K u band which ranges approximately from 12 to
18 GHz.
The LNB (Low Noise Block converter) is used to take a wide band of relatively high frequencies, amplify and convert them to similar signals that is carried at a much lower frequency, which is called Intermediate Frequency
(IF). High frequencies from satellites are converted into 950 to 2150 MHz by a LNB.
Select the Installation > LNB
Setting menu to configure the
LNB settings. You should see a screen like the left figure.
Pressing the button on the Satellite Name option displays the satellite list in alphabetic order. Select the satellite toward which your antenna is set to face. Even if you cannot find your desired satellite, you can add your desired satellite to the satellite list. See §
for a detailed description.
You have to specify which tuner is connected to your selected satellite. If it is LNB 1 IN , set the Tuner Select option to Tuner
3.1 Searching for broadcasting services 21
1 ; otherwise, set it to Tuner 2 .
If you have connected the LNB 1 OUT and LNB 2 IN with a loop-through cable, then set the Connection Type option to
Loop Through ; otherwise, set it to Separated .
NOTE
Both the LNB 1 IN and LNB 2 IN sockets should be connected to your antennas either directly or via the loop-through cable. If you have connected only one socket, some features such as dual recording will not function.
The digital receiver has a database of broadcasting satellites and their transponders, containing the following information: satellite position, frequency range, symbol rate, polarization and LNB frequency corresponding to the frequency range.
So you might not have to specify the LNB Frequency option.
However, if you have selected the Other entry at the Satellite
Name option to specify a satellite that is not in the satellite list, you might have to fill in the correct LNB frequency. The absolute difference between a broadcasting frequency and its LNB frequency must be within 950 to 2150 MHz. For example, if the frequency band of your desired satellite ranges from 3660 to
4118 MHz, you have to set the LNB Frequency option to 5150
MHz .
The LNB has to be supplied with electric power to operate. Set the LNB Power option to On if it does not have any other power supply.
If you use a dual LNB or two antennas which is connected to the 22 kHz tone switch box, set the 22 kHz option to On .
The digital receiver is designed to be compatible with DiSEqC
(Digital Satellite Equipment Control) switches. It is possible to connect several antennas to one digital receiver by DiSEqC switches. A DiSEqC 1.0 switch allows switching between up to four satellite sources and a DiSEqc 1.1 switch allows switching between up to 16 satellite sources.
3
22 Service Search
Set the DiSEqC 1.0
option and the DiSEqC 1.1
option according to your antenna configuration.
For example, to select the antenna connected to the A5 input in the left figure, set the DiSEqC 1.1
option to 2 of 4 and the DiS-
EqC 1.0
option to 1 of 4 . If you have a mini
DiSEqC 1.0 switch which has only two inputs, you should set the DiSEqC 1.0
option to Mini A instead of 1 of 4 .
3.1.2
Configuring DiSEqC 1.2 settings
Your motorized antenna will turn toward your desired satellites horizontally by DiSEqC 1.2.
When you switch to a service, if it is not provided by the current satellite, it will take longer time than usual because the antenna has to turn to its position.
To use the DiSEqC 1.2 protocol, select the Installation > Motorized DiSEqC 1.2
menu.
You should see a screen like the left figure. At first you have to set the
Motorized DiSEqC 1.2
option to
Enable .
To get the correct position of your desired satellite, take the
3.1 Searching for broadcasting services 23 following steps:
1. Choose your desired satellite at the Satellite Name option.
2. Select the tuner that is connected to the motorized antenna at the Tuner Select option.
3. Set the DiSEqC Command Mode option to User .
4. Set the Motor Control option to Goto . Then the antenna will turn toward your selected satellite by the position data that the digital receiver has.
5. If the receiving quality, which is displayed at the bottom right of the screen, is not good, tune the antenna finely with the Movement option. If you set it to 2(E) , the antenna will move to the east by two degrees. At this time you had better check the receiving quality of every transponder and choose the best one at the Transponder (or
Frequency ) option. It will be helpful to your fine tuning.
6. Finally set the Motor Control option to Store to save the tuned position when the receiving quality is best.
There are more motor control options for installers, but this guide does not describe them. If you are an installer, refer them to the manual about the STAB rotor.
3.1.3 Configuring USALS settings
USALS (Universal Satellite Automatic Location System), also known as DiSEqC 1.3, calculates the positions of all available satellites from your location. Compared to DiSEqC 1.2, it is no longer required to manually search and store every satellite position. Just pointing to a known satellite position is enough.
This position will act as a central point. The USALS will then calculate positions of visible satellites.
3
24 Service Search
To use the USALS protocol, select the Installation > USALS
Setting menu. You should see a screen like the left figure. At first you have to set the Motorized DiSEqC 1.3
option to Enable .
To get every satellite position calculated, take the following steps:
1. Choose your desired satellite at the Satellite Name option.
2. Select the tuner that is connected to the motorized antenna at the Tuner Select option.
3. Enter your location to the My Longitude option and the
My Latitude option with the , and numeric buttons.
4. Enter the position of your selected satellite to the Satellite
Angle option if it is not correct.
5. Select the Goto the position option, then the antenna will turn toward your selected satellite as calculating its position.
6. If the receiving quality, which is displayed at the bottom right of the screen, is not good, then tune the antenna finely with the Move option. The changed position is automatically saved. At this time you had better check the receiving quality of every transponder and choose the best one at the Transponder (or Frequency ) option.
It will be helpful to your fine tuning.
3.1.4
Searching for services
3.1 Searching for broadcasting services 25
To perform a service search, select the Installation > Searching menu. You should see a screen like the left figure.
There are in general four service search methods:
• searching every service of a satellite,
• searching every service of a transponder,
• searching single service of a transponder,
• searching every service of a SMATV (Satellite Master Antenna Television) system.
Searching every service of a satellite
To search every service of a satellite, take the following steps:
1. Choose your desired satellite at the Satellite Name option.
2. Set the Search Mode option to Auto .
3. If you set the Network Search option to On , the digital receiver will check up the up-to-date channel information while searching services, but it takes a rather longer time.
With the Auto mode, the digital receiver tries to search every service, relying on the transponder data which is stored at the time of manufacture. It thus may happen to fail to search all actually available services since services are more often than not launched, discontinued, or removed into another transponder.
3
26 Service Search
Searching every service of a transponder
To search every service of a transponder, take the following steps:
1. Choose your desired satellite at the Satellite Name option.
2. Set the Search Mode option to Manual , and then press the button to diaply additional options.
3. Choose your desired transponder at the Frequency option or enter it with the numeric buttons.
4. Enter the symbol rate of your desired transponder to the
Symbol Rate option with the numeric buttons.
5. Set the Polarization option to match to that of your desired transponder.
6. If you set the Network Search option to On , the digital receiver will check up the up-to-date channel information as searching services, but it takes rather longer time.
7. Set the Modulation option to match to that of your desired transponder. If the transponder is of the DVB-S2 standard, you should set this option to DVB-S2 QPSK or
DVB-S2 8PSK . Then the FEC option and the Pilot option will become enabled. You also should set these options correctly.
NOTE
You may get transponder information from a satellite magazine or website such as http://www.satbeams.com
or http:
//www.lyngsat.com
.
Searching single service of a transponder
To search single service of a transponder, take the following steps:
1. Choose your desired satellite at the Satellite Name option.
3.1 Searching for broadcasting services 27
2. Set the Search Mode option to Advanced , and then press the button to diaply additional options.
3. Choose your desired transponder at the Frequency option or enter it with the numeric buttons.
4. Enter the symbol rate of your desired transponder to the
Symbol Rate option with the numeric buttons.
5. Set the Polarization option to match to that of your desired transponder.
6. Set the Modulation option to match to that of your desired transponder. If the transponder is of the DVB-S2 standard, you should set this option to DVB-S2 QPSK or
DVB-S2 8PSK . Then the FEC option and the Pilot option will become enabled. You also should set these options correctly.
7. At the PID option, specify the audio and video packet identification (PID) of your desired service with the numeric buttons.
Searching every service of SMATV system
To search every service of a SMATV system, if the digital receiver is connected to it, take the following steps:
1. Choose your desired satellite at the Satellite Name option.
2. Set the Search Mode option to SMATV , and then press the button to diaply additional options.
3. Choose your desired transponder at the Frequency option or enter it with the numeric buttons.
4. Enter the symbol rate of your desired transponder to the
Symbol Rate option with the numeric buttons.
You can search pay services as well as free services as follows:
• To search only free services, set the FTA/Scrambled option to FTA only .
• To search only pay services, set it to CAS only .
3
28 Service Search
• To search both free services and pay services, set it to FTA
+ CAS .
To start service search, move down to the Start Search item, and press the button. The digital receiver will start to search for services and display a list of television and radio services as they are found. It is common for no channels to be found until quite late in the process. When the scan is complete, you will see a message telling you how many services have been found. Press the button to save the list.
3.2 Copying services
The digital receiver maintains a separate services list with each tuner. If a certain service is registered on only one tuner, it may be impossible to watch one service while recording. You can copy entries of one tuner’s services list to the other tuner’s services list to avoid such inconvenience.
To copy service entries, select the Installation > Services Copy menu. There are three copy options. To copy service entries of the first tuner to the second tuner’s services list, select the
Tuner 1 to Tuner 2 option. To copy on the contrary, select the
Tuner 2 to Tuner 1 option. To copy reciprocally, select the ALL option.
3.3 Editing the transponder list 29
3.3
Editing the transponder list
If you failed to receive services of a transponder because it consists of wrong data, you can solve it by correcting the data. Select the
Installation > SAT/TP Edit menu.
To change the data of a transponder, take the following steps:
1. Choose your desired satellite at the Satellite Name option.
2. Choose your desired transponder at the Frequency option.
3. Change the Polarization option to match to that of your desired transponder.
4. Set the Modulation option to match to that of your desired transponder. If the transponder is of the DVB-S2 standard, you should set this option to DVB-S2 QPSK or
DVB-S2 8PSK . Then the FEC option and the Pilot option will become enabled. You also should set these options correctly.
5. To change a satellite entry’s name, select your desired entry at the Satellite Name option and select the SAT
Name Edit option. Then the on-screen keyboard ap-
pears. Change the name and save it. See § 6.3
as to how to use the on-screen keyboard.
6. Select the Save option and press the button to save the changes. To stop at any time or to exit without saving, press the EXIT button.
3
30 Service Search
3.4
Resetting to factory settings
The digital receiver maintains the following data:
• Satellite list
• Services list
• Favourite list
• Timer list
• Preference settings
You can reset all data of the digital receiver. Select the Installation > System Recovery > Factory Setting menu, and then you get asked for confirmation. With the choice of Yes , the services list, favourite list and timer list will all be cleared, and preference options will be reset to the manufacturer’s factory settings.
NOTE
A factory reset will not delete any recorded programmes.
However, you have to search services again after a factory reset.
3.5 Resetting to user settings
You can store your own data including the following:
• Satellite list
• Services list
• Favourite lists
• Preference settings
Also you can restore them at any time.
To store your data, select the Installation > System Recovery >
Store System Data menu, then you get asked for confirmation.
If you select Yes , your data will be stored. Whenever you store your data, they are all overwritten.
To restore your data, select the Installation > System Recovery
> Recover System Data menu, then you get asked for confirmation. With the choice of Yes , your data will be restored.
3.5 Resetting to user settings 31
You can also store your data to an external storage. To store your data to an external storage, select the Installation > System Recovery > Export System Data menu, then you get asked for confirmation. With the choice of Yes , your data will be stored. Every time you store your data, they are all overwritten.
To restore your data from an external storage, select the Installation > System Recovery > Import System Data menu, then system data will be listed. Select a data and press the button, then your data will be restored.
You can edit the channel data on your computer by using a channel editor software, Vega , which is available from Topfield’s website, http://www.i-topfield.com/eng/download/ utility_list.asp
.
3
With Vega you can do the following:
• Adding, deleting or modifying satellite entries
32 Service Search
• Adding, deleting or modifying transponder entries
• Deleting or modifying service entries
• Adding, deleting or modifying favourite groups
As to how to use Vega, refer to its user guide, which is accompanied by the software.
3.6
Clearing the services list
If you only want to clear the services list, select Installation >
System Recovery > Reset Service List , then you get asked for confirmation. With the choice of Yes , the services list will be cleared. After this, you have to do service search again.
33
Chapter 4
Preference Settings
4.1 Language settings
You can select the language in which the menu will be displayed. In addition to that, you can select the language of audio track and of subtitle track. Select the Settings > Language menu.
You should see a screen like the left figure.
4.1.1 Menu language
The digital receiver provides menus in several different languages. Set the Menu Language option to your desired language. Once you select a language, the menu will be immediately displayed in the selected language.
4
34 Preference Settings
4.1.2
Subtitle language
Set the 1st Subtitle Language option and the 2nd Subtitle Language option to your desired languages. When you watch a programme, if the programme has a subtitle track of the language that is specified for the 1st Subtitle Language , it will be displayed. If the first language is not available but the second language is available, the subtitle of the second language will be displayed. If there is no available language, no subtitle will be displayed.
Apart from this setting, you can select a subtitle track with the
for a detailed description.
4.1.3
Hard of Hearing
Some broadcasters may send a subtitle track dedicated to the hard-of-hearing. Even when a subtitle track or more is available, that subtitle track will be displayed prior to those you have specified for the 1st Subtitle Language and the 2nd Subtitle Language options if the Hard of Hearing option is set to
On .
4.1.4
Audio language
Set the 1st Audio Language option and the 2nd Audio Language option to your desired languages. When you watch a programme, if the programme has an audio track of the language that is specified for the 1st Audio Language , it will be output. If the first language is not available but the second language is, the audio of the second language will be output.
Apart from this setting, you can select an audio track with the
for a detailed description.
4.2
Video and audio settings
4.2 Video and audio settings 35
You have to configure the video and audio settings appropriately for your television set and other devices. Select the Settings >
A/V Output menu. You should see a screen like the left figure.
4.2.1
High definition television
The digital receiver supports various video resolutions from
576 to 1080. In general, a resolution of 720 or more is considered high definition. The higher the resolution is, the better the quality is. However, if your television set does not support high definition, you cannot enjoy high definition quality picture.
If you have the digital receiver linked to your television via the
Component video output ( Y / Pb / Pr ) or the HDMI output, you have to set the HD Output option to Component . Otherwise, you have to set it to SCART . The available values for the Video
Format option vary depending on how you set this option.
Set the Video Format option as you desire. If you set this option to 576P , the digital receiver will present even high definition programmes in resolution of 576. On the contrary, if you set it to 1080I , the digital receiver will present even standard definition programmes in resolution of 1080.
It is recommended to set it to Auto if you have a high definition television. With that setting the digital receiver will present a programme as it is without any resolution conversion. While watching television you can change the resolution with the
4
36 Preference Settings button. Whenever you press it, the video resolution is changed in turn.
NOTE
You can enjoy only standard definition video with the following video outputs:
• Composite video output ( VIDEO )
• SCART output ( TV )
4.2.2
Television aspect ratio
If you have a wide-screen television, set the TV Aspect Ratio option to 16:9 .
You can enjoy both wide-screen programmes and normalscreen programmes with your wide-screen television as the above figures show.
To watch normal-screen programmes in full screen like the left figure, set the Display Format option to Full . Normal-screen pictures then will be inflated to fit to the width of the wide screen. Otherwise, to watch them in the original ratio like the right figure, set it to Center . If you have a normal-screen television, set the TV Aspect Ratio option to
4:3 .
4.2 Video and audio settings 37
You cannot fully enjoy wide-screen programmes with your normal-screen television as the above figures show. The left figure shows a normal picture displayed in the normal screen.
To watch wide-screen programmes in the shape like the centre figure, set the Display Format option to Letter Box . Widescreen pictures then will be reduced to fit to the width of the normal screen. Otherwise, to watch them in the shape like the right figure, set it to Center extract . Then wide-screen pictures will be cut out on the left and right sides equally to fit to the width of the normal screen.
4.2.3
Colour format
Through the TV SCART output, the digital receiver is able to output video in various colour formats. If you have the digital receiver linked to your television via this output, you should set the SCART Output option to your desired colour format.
If you have connected via the RCA socket labeled VIDEO on the back panel, you do not have to set this option because the digital receiver outputs CVBS video through that RCA output independently of the SCART output.
In general, it is known that the RGB colour format provides the best video quality but the CVBS colour format does the least.
So RGB would be the most desirable option for this.
4.2.4 Another video device
You can have the digital receiver linked to another video device like a video recorder or a DVD player via the VCR SCART output.
In this case, the digital receiver will operate differently depending on the setting of the VCR SCART Type option. If the option is set to Standard , the digital receiver will pass along the video from the video device to your television when it starts playback. But if the option is set to External A/V , the digital receiver will not pass the video automatically. You have to press the button to pass it along.
It is impossible for the digital receiver to record the video from the video
4
38 Preference Settings device since the digital receiver is just a bypass for the video recorder.
4.2.5
Audio mode
Basically, there are two audio sources as you can find two audio sockets on the back panel of the digital receiver. You can enjoy only one source or both of them in either stereo or mono. Set the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with the button. See §
for a detailed description.
The digital receiver can output two types of digital audio signals via the S/PDIF output. One is an encoded signal, and the other is a decoded signal. If you have the digital receiver linked to your audio-video receiver via the S/PDIF output, you have to set the Dolby Digital option to Off , which means that the digital receiver will output encoded Dolby Digital audio without decoding so that your audio-video receiver can decode it.
Otherwise, set it to On , then the digital receiver will output decoded Dolby Digital audio, scaling it down to two channels.
NOTE
Only if the service you are currently watching provides a Dolby Digital audio track, you can enjoy Dolby Digital sound.
4.3
Local time setting
You should set your local time for timer events. If you do not set the local time correctly, the programme time table provided by the programme guide may be distrustful. For the programme guide, refer to §
4.3 Local time setting 39
Select the Settings > Time menu. You should see a screen like the left figure. You can set the clock manually or use the time signal, Greenwich Mean
Time (GMT), carried as part of the digital television broadcast.
To use Greenwich Mean Time, take the following steps:
1. Set the Mode option to Auto , then the Time Offset option becomes enabled.
2. Set the Time Offset option to the time difference between your time zone and GMT referring to Table
3. To get Greenwich mean time, set the GMT Collection option to one among the followings:
Normal from all transponders
CAS Only from transponders of pay services
User Select from transponders specified by you
If you set it to User Select , then the Satellite option and the Transponder option become enabled. Select your desired satellite and transponders at those options. With the above settings, the digital receiver will scan all specified transponders one by one until it gets the Greenwich
Mean Time.
4. Make sure that your local time is correctly displayed on the Local Time item.
To set the local time manually, set the Mode option to Manual and enter your local time to the Local Time option with the numeric buttons. The time format is day/month/year 24hour:minute .
If daylight saving time is observed in your state at the moment, set the Daylight Saving Time option to On .
4
40 Preference Settings
NOTE
Daylight saving time adds one hour to the time when the option is set to On . When setting the time offset from Greenwich Mean Time, make sure that time offset does not include daylight saving time.
Table 4.1: Time offset table
Time offset City
GMT − 12:00 Eniwetok, Kwajalein
GMT − 11:00 Midway Island, Samoa
GMT − 10:00 Hawaii
GMT − 09:00 Alaska
GMT − 08:00 Pacific Time US, Canada
GMT − 07:00 Mountain Time US, Canada
GMT − 06:00 Central Time US, Canada, Mexico City
GMT − 05:00 Eastern Time US, Canada, Bogota, Lima
GMT − 04:00 Atlantic Time Canada, La Paz
GMT − 03:30 Newfoundland
GMT − 03:00 Brazil, Georgetown, Buenos Aries
GMT − 02:00 Mid-Atlantic
GMT − 01:00 Azores, Cape Verde Islands
GMT London, Lisbon, Casablanca
GMT + 1:00
GMT + 2:00
GMT + 3:00
GMT + 3:30
Paris, Brussels, Copenhagen, Madrid
South Africa, Kaliningrad
Baghdad, Riyadh, Moscow, St. Petersburg
Tehran
GMT + 4:00
GMT + 4:30
GMT + 5:00
Abu Dhabi, Muscat, Baku, Tbilisi
Kabul
Ekaterinburg, Islamabad, Karachi, Tashkent
GMT + 5:30
GMT + 6:00
GMT + 7:00
Bombay, Calcutta, Madras, New Delhi
Almaty, Dhaka, Colombo
Bangkok, Hanoi, Jakarta
GMT + 8:00
GMT + 9:00
Beijing, Perth, Singapore, Hong Kong
Tokyo, Seoul, Osaka, Sapporo, Yakutsk
GMT + 9:30 Adelaide, Darwin
GMT + 10:00 Eastern Australia, Guam, Vladivostok
GMT + 11:00 Magadan, Solomon Islands, New Caledonia
GMT + 12:00 Fiji, Auckland, Wellington, Kamchatka
4.4 Parental control 41
4.4
Parental control
In general, television programmes are classified according to the level of violence, nudity and language of their content.
When you are watching a programme, you can check its programme classification on the information box. For the infor-
. You can prevent your children from watching specific programmes by specifying a maximum permissible level.
Select the Settings > Parental
Control menu. You should see a screen like the left figure, and you will be asked your
Personal Identification Number
(PIN). The number is initially set to ‘0000’ as default.
4
If you wish to block programmes for viewers aged 15 or above, set the Censorship option to 15 (age) . Setting it to No block blocks no programme; on the other hand, setting it to Total block blocks every programme.
NOTE
If a programme has no rating information, your censorship setting will not take effect.
If anyone is trying to watch a programme that is of or above the censorship setting, the person has to enter the personal identification number to override. To change the number, select the
Change PIN Code menu, then a box pops up, asking a new
PIN. Enter a desired number twice for confirmation.
You can also restrict uses of some menus. Selecting the Access
Control menu displays a list of menus that you can lock. If the
42 Preference Settings
Time item is set to Locked , you have to enter the PIN when accessing the Time menu. If you enter a wrong number, you cannot use the menu. To release a locked item, set it to Unlocked .
4.5
To use MediaHighway programme guide
Almost every service provider would provide the electronic programme guide. However, you can get more abundant programme information from a specific transponder that provides only programme guides. For detailed description about electronic programme guide, see §
the transponder dedicated to the electronic programme guide.
If you want to use this feature, select the Settings > MediaHighway EPG menu. You should see a screen like the left figure.
Set the MediaHighway EPG option to On to activate this feature, then the other options become enabled. Set the Satellite
Name and Home Transponder options to available ones, and set the Tuner Select option to the tuner through which to receive the specified transponder. The digital receiver will try to receive programme guide within the duration specified at the
EPG Gathering Time option.
4.6
Options for recording
4.6 Options for recording 43
To set the options for recording, select the Settings > Recording menu. You should see a screen like the left figure.
To enable the time-shift function, you should set the Time Shifting option to anything other than Disable . The available range for this option is 30 minutes to 5 hours. You will have the latest of the current programme as long as the duration specified at this option.
You can record a programme into both an external and the built-in hard drive. If you want to record a programme into an external hard drive, set Recording Drive option to External ; otherwise, set this option to Internal .
If you set the Time Shift Storage option to Enable , the timeshifted programme will be saved in the TimeShift folder of the hard drive.
You can set the duration of the timer recording. Set the Timer
Recording Duration option as you desire. Its available range is
10 minutes to 3 hours.
Time padding is the feature of adding extra recording time to the beginning or end of a programme, so that you do not miss any part of the programme. Set the Time Padding of Timer
Recording option as you desire.
You can adjust the duration of the instant recording. Set the
Instant Recording Duration option as you desire. Its available range is 30 minutes to 5 hours.
4
44 Preference Settings
4.7
Options for playback
To set the options for playback, select the Settings > Playback menu. You should see a screen like the left figure.
If you want to play back a recorded file from beginning, set
Starting Position option to Beginning . To play back a recorded file from the part where you were watching, set this option to
Continuing .
To make a descrambled copy from a scrambled recording, set the Descramble Mode option to Auto Recording ; otherwise, set this option to Normal .
You can adjust the jump interval that is for playback. Set the
Jump Time Interval option as you desire. Its available range is
10 seconds to 3 minutes.
If you want to enjoy more levels of playback speed, set the Trick
Mode Level option to 2x, 4x, 8x, 16x, 32x, 64x ; otherwise, set it to 4x, 16x, 64x .
NOTE
You can enjoy video files such as DivX with the digital receiver. However, the above options might not be effective depending on the video files to be played. For detailed de-
scription on how to play back a video file, refer to § 8.3
.
If you have subtitle files such as .smi, .sub, .idx, and .srt, the digital receiver can also display them. The Media Subtitle item provides some options for video subtitle. When you play back
4.8 Options for on-screen display 45 a video file with a subtitle file, if the subtitle does not match the video, then you can synchronise them by adjusting the value of the Sync option. In addition, you can change the colour and size of subtitle by setting the Font Color and Font Size options to one you prefer.
4.8
Options for on-screen display
To set the options for the onscreen display (OSD), select the
Settings > OSD menu.
You should see a screen like the left figure.
4
To adjust the transparency level of the OSD, set the OSD Transparency option as you desire. Its available range is 0 to 50 percent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box , the information box will not be displayed when you switch services.
However, pressing the button will display the information box. If you set this option to Never Hide , the information box will always be displayed. For the information box, see
§
In addition, you can raise or lower the position of the information box. Set the Info Box Position option as you desire. Its available range is −
10 to +3 lines. The higher you set the option, the lower the information box will be positioned.
46 Preference Settings
To use an animation effect when changing menu, set the Animation option to Enable .
If any service’s name is too long to fit the width of the service name column on the services list screen, you can get it to scroll by setting the Text Scroll option to anything other than Disable .
With the choice of Full Scroll , it will be fully scrolled until its end disappears; with the choice of Part Scroll , it will be scrolled only to its end.
4.9 Options for the front display
To set the options for the front display, select the Settings >
Front Display menu. You should see a screen like the left figure.
The front display shows the currently viewed service’s number and name. If any service’s name is too long to fit the width of the service name column, you can get it to scroll by setting the
Main Display Scrolling option to anything other than Disable .
With the choice of Unlimited , it will be repeatedly scrolled; with the choice of Once , it will be scrolled only once. If you want to have the current time displayed instead of the service number, set the Sub Display Content option to Time .
You can also adjust the brightness of the front display in active mode and standby mode by setting the Brightness in Operation
Mode option and the Brightness in Standby Mode option to any as you like.
4.10 Options for standby mode 47
4.10
Options for standby mode
You can have the current time displayed on the front display in standby mode. Select the Settings > Miscellaneous menu and set the Standby Mode option to Active ; otherwise, set it to Passive . When you set the Standby Mode option to Active , the receiver can also bypass the signal from the antenna. To save power consumption, you might as well set the Automatic
Power Down option to Enable . With this option enabled, the receiver will be turned off automatically when there is no manipulation over three hours.
4
48 Every Day Use
Chapter 5
Every Day Use
5.1 Volume control
Use the VOLUME
− and VOLUME + buttons to alter the volume to a comfortable level. You may need to adjust the volume on your television set too. To temporarily switch off the sound, press the vious level.
button. Press it again to restore the sound to pre-
5.2
Watching television
To change services, press the CHANNEL − or CHANNEL + button.
Pressing the button switches to the previously viewed service. In addition, you can switch to your desired service by entering its service number with the numeric buttons. You can also select a service to watch in the services list.
5.2.1
The services list
To view the services list, press the button.
5.2 Watching television 49
On the services list, you can see the service information as follows:
• Service number and name
• Transmitting satellite
• Receiving tuner: T1 stands for the first tuner; T2 stands for the second tuner.
• Multiplex information
A dollar sign ( $ ) may be marked on some entries, indicating pay service. To watch pay services, you need a subscription card.
To select a desired service, put the highlight bar on its entry with the or button and press the button, then the selected service will be presented.
Pressing the or button skips over 10 entries up or down.
Entering a service number with the numeric buttons puts the highlight bar on its entry.
You can switch between the television services list and the radio services list by pressing the button.
To sort the services list by service name, press the F2 button.
Pressing this button once more makes it sorted by service number.
Pressing the Option button displays additional options, with which you can do the following:
• Select your desired satellite at the Satellite option, then only services provided by the selected satellite will be listed.
• Select your desired tuner at the Tuner option, then only services provided through the selected tuner will be listed.
5
50 Every Day Use
• By setting the Show Provider option to On , you can view service entries by groups of broadcasters.
• To change the name of the highlighted service, select the
Rename option, then appears the on-screen keyboard with which you can enter a new name. See §
as to how to use the on-screen keyboard.
• You can prevent other family members from watching the highlighted service by setting the Lock option to
Locked . You have to enter your personal identification number to watch or unlock it.
• To delete the highlighted service, select the Delete option, then you get asked for confirmation. With the choice of Yes , the service will be deleted. If you want to restore it as before, you have to perform service search
for service search.
• To add the highlighted service into a favourite group, select the Add to Fav option, then the favourite groups will be displayed. Put the highlight bar on a desired group and press the button.
• You can additionally sort the services list with the Sorting option as follows:
Default by service number
Alphabetic by service name
Satellite by satellite
FTA–CAS from free services to pay services
CAS–FTA from pay services to free services
Provider by broadcaster
Fav–NoFav from favourite services to unfavourite services.
Transponder by transponder
5.2.2 The favourite service lists
You can select a service on a favourite list as well as on the services list.
5.2 Watching television 51
To display the favourite lists, press the F2 button at the services list screen. For the services
.
To select a favourite list, put the highlight bar on a desired favourite group list and press the button, then the selected favourite group’s services will be listed.
As to how to edit the favourite lists, refer to § 6.2
To select a favourite service, put the hightlight bar on a desired service and press the button, the it will be displayed. To select another group, press the button.
After you have selected a favourite service, if you then switch to another service using the or button, it will be also another favourite service of the selected group. The digital receiver will remind you what group you have selected by displaying its name at the top right of the screen whenever you switch services.
To return to the services list, press the F1 button. Besides that, you can add or delete a favourite group or service.
To add the service you are currently watching into a favourite group, press the Option button to display additional options, and then select Add this service item.
To remove the currently highlighted favourite grop or service, select Delete item in the additional option box, then you get asked for confirmation; with the choice of Yes , it will be removed.
5.2.3 Viewing programme information
Pressing the button displays the information box, on which you can see all of the following:
5
52 Every Day Use
• Service number and name
• Transmitting satellite
• Receiving tuner
• Transponder information
• Signal level and quality
• Programme name
• Programme classification sign
• Programme summary
• Broadcasting time
• Current time
In addition, you might see the following symbols:
• Subtitle symbol ( ) if subtitle tracks are provided on the current programme.
• Teletext symbol ( ) if teletext pages are provided on the current service.
• Dolby Digital symbol ( ) if a Dolby Digital audio track is provided on the current programme.
• Lock symbol ( ) if the current service is locked.
• Dollar symbol ( $ ) if the current service is a pay service.
• Multifeed symbol ( ) if the current programme is provided as a multifeed programme. To use this feature, refer to §
If the electronic programme guide is provided on the current service, you can see the information about the current and next programmes with the or button. You can also see the information about other services with the or . In this case, you can change a service by pressing the button.
Pressing the button once more displays detailed information about the current programme. To hide the information box, press the EXIT button.
5.3 Viewing electronic programme guide 53
5.2.4
Selecting audio tracks
Some programmes are provided with audio tracks in one or more languages. Pressing the button displays available audio tracks. Once you select an audio track, that track will be heard. In addition, you can enjoy audio tracks in four sound modes: Stereo , Mono , Left or Right . However, if a multifeed programme is provided at the moment, video tracks will be displayed. In this case, you have to press the button once more to select an audio track.
5.2.5
Selecting subtitle tracks
Some programmes are provided with subtitle tracks in one or more languages. If the current programme provides subtitle tracks, the subtitle symbol ( ) will be marked on the information box. Pressing the button displays available subtitle tracks. Once you select a subtitle track, it will be displayed.
5.2.6
Viewing teletext
On some services, such information as weather reports, news or stock quotations is provided by means of teletext. If the current service provides teletext, the teletext symbol ( ) will be displayed on the information box. Press the button to view teletext pages.
Select a page to view by entering its page number with the numeric buttons. You can zoom into a teletext page with the button, and adjust its transparency level with the F4
F3 button.
To clear the teletext screen, press the EXIT button.
5.3
Viewing electronic programme guide
The Electronic Programme Guide (EPG) shows the current and scheduled programmes that are or will be available on each service with a short summary for each programme.
5
54 Every Day Use
Pressing the GUIDE button displays the electronic programme guide, on which you can see the following:
• Scheduled programmes
• programme summary
• Broadcasting date
• Broadcasting time
To see detailed information of a desired programme, put the highlight bar on the programme with the or button and press the button. To switch to another service, press the or button.
You can travel over previous days with the F2 button, and can travel over next days with the F3 button.
To see the programme guide for radio broadcasts, press the button. To switch it back, press the button again.
Pressing the button will rearrange the form, swapping the columns and rows. To switch it back, press the F1 button again.
You can make a timer recording on the electronic programme
for detailed description.
5.4
Watching multifeed programme
Some broadcasts such as sports channels can provide a variety of perspectives on a programme at the same time. We call it a multifeed programme. You can select and watch a perspective you prefer.
If a multifeed programme is provided on the current service, the multifeed symbol ( ) will be marked on the information box. Press the button, then available video tracks will be listed. Once you select one, it will be presented. At this time,
5.5 Using time-shift 55 you have to press the tracks.
button once more to select audio
5.5
Using time-shift
You can pause and resume a live television programme, and even rewind and replay it. When you are watching a programme and you miss something, you can rewind and replay it. Or when your attention is needed elsewhere, you can pause a live TV and resume a short time later without losing any of the programme.
When you do this, you are no longer watching the live programme, instead you are watching a delayed presentation. This is called time-shifted television.
You can skip commercials until you catch up to the live broadcast.
5
In order to use the time-shift feature, set the Time Shifting option to desired duration of time. Then the digital receiver will archive the programme as much time as you set in the option.
.
The time-shift will be reset each time you change to another service. With the time-shift, the following operations are possible:
• To go back in time, hold down the button; to go forward, hold down the button. The progress bar is displayed momentarily with a preview window.
• You can navigate using the progress bar, refer to §
.
56 Every Day Use
• You can jump backward and forward by pressing the and F3
F4 buttons. You can change the jump time at the
Jump Time Interval option. See §
• You can change playback speed. See §
for slow mo-
tion. For fast motion, see § 7.3.3
.
• To check your current position in time-shift, press the button. The time difference compared to live programme is displayed momentarily in top right corner of the screen. A value of − 02:00 means two minutes behind the live programme.
• To make a recording of the time-shifted programme„ see
.
• To end time-shift, press the gramme will be displayed.
button. The live pro-
NOTE
You can adjust some options for time-shift. Refer to § 4.6
57
Chapter 6
Organising Services
6.1 Editing the services list
You would have got the services list after service search. You can rename, move, lock or delete service entries on the services list.
Select the installation > Edit Services > Edit Service List menu.
You should see a screen like the left figure. There are editing options on the left column and service entries on the right column.
6
Once you put the highlight bar on a desired option on the left column and press the button, you can select a desired service to edit on the right column. To go over to the other column, press the F1 button.
To edit the radio services list, press the button, then radio
58 Organising Services service entries will be listed on the right column. To switch back to the television services list, press it again.
To change the name of a service, select the Rename and select a desired service; then the on-screen keyboard appears. See
§
as to how to use the on-screen keyboard.
Unlike analogue broadcasts, each service does not have a proper service number in digital broadcasts. Service numbers are just assigned to services in the order that they were found in service search. So you can reassign a service number by moving a service entry. To move a service entry, select the Move option and select a desired service; then the selected service becomes darker. As you move it up or down, it gets renumbered according to the position. Press the button to fix it.
You can lock some services to prevent your children from watching them. To lock a service, select the Lock option and select a desired service; then the selected service gets marked with a lock symbol ( ) on it. If anyone tries to watch a locked service, the person has to enter the personal identification number that is set to the Change PIN Code option. See
§
for this option. Pressing the button on a locked service entry turns it back to be unlocked.
To delete a service, select the Delete option and select a desired service with the button, and then press the EXIT button; you get asked for confirmation. If you select Yes , the selected service will be deleted. If you want to undo the deleted service, there is nothing you can do but perform a service search again.
Once you select the Sort option on the left column, sorting options are displayed as follows:
Default by service number
Alphabetic by service name
Satellite by satellite
FTA–CAS from free services to pay services
CAS–FTA from pay services to free services
6.2 Editing the favourite lists 59
Fav–NoFav from favourite services to unfavourite services
Provider by broadcaster
Transponder by transponder
6.2
Editing the favourite lists
You can make your own favourite service lists. In fact, you can define multiple favourite service lists, each being a ‘group’ of chosen services.
Select the installation > Edit Services > Edit Favorite List menu.
You should see a screen like the left figure. There are three columns:
• Group list (left)
• Favourites list (centre)
• Services list (right)
The services list contains all available services, whereas the favourites list contains only chosen services that have been added to the highlighted group. As you move the highlight bar up or down on the group list, favourite services belonging to the highlighted group get shown in the favourites list.
You can add up to 30 groups. To add a new group, select the
NEW item in the group list, then the on-screen keyboard ap-
as to how to use the on-screen keyboard.
To rename a group, put the highlight bar on the group entry you want and press the F2 button, then the on-screen keyboard likewise appears.
To delete a group, put the highlight bar on the group entry you want and press the F3 button, then a message box appears, asking you for confirmation. With the choice of Yes , it will be deleted.
6
60 Organising Services
You can add a favourite service to a group by taking the following steps:
1. Put the highlight bar on a desired group entry in the group list and press the button to select it. The highlight bar then moves to the services list.
2. To add a service to the selected group, put the highlight bar on a desired service entry and press the button.
The selected service entry gets added to the favourite list.
Repeat this step to add more entries.
3. Press the F1 button, and the highlight bar gets moved to the favourite list. You can delete a favourite entry with the button.
4. To select another group, press the F1 button again, then the highlight bar gets moved to each column.
Furthermore, you can rearrange a group’s favourites by moving a favourite entry. To move a favourite entry, put the highlight bar on the favourite entry you want and press the button. Move it to a desired place and press the button.
F2
To add radio services, press the button, then radio service entries get listed in the services list. To recall the television services list after adding radio services, press the button again.
As to how to use the favourite service lists you organised, refer to §
6.3 How to use on-screen keyboard 61
6.3
How to use on-screen keyboard
You can move the highlight key horizontally with the and buttons and vertically with the and buttons. Pressing the
OK button on a key enters its letter in the input line.
To type a space, select the Space key or alternatively press the button. To type lower case letters or numerals, select the
Shift key or alternatively press the button. To delete a letter, put the cursor to the right of the desired letter on the input line and then select the Del key or alternatively press button. You must select the Save key or alternatively press the button to complete your typing; otherwise if you press the
EXIT button, it will not be saved.
6
62 Recording and Playback
Chapter 7
Recording and Playback
You can record TV programmes into an external hard drive as well as the built-in hard drive.
NOTE
To use an external hard drive, you must connect the external hard drive to the USB port or the eSATA port of the digital receiver.
You cannot play back the recordings with a regular MPEG player on your computer because they are formatted differently from the standard MPEG format. Visit http://www.kmplayer.com
where you can find an MPEG player able to play them back.
CAUTION
Do not disconnect the external hard drive while recording or playing back. It may cause damage to recorded programmes. You should disconnect the external hard drive in standby mode only.
You can record a service while watching another one with this digital receiver. You can record two different services while
7.1 Recording a programme 63 watching another one only if two among the services are provided through the same transponder. The digital receiver has two tuners so that you can enjoy the following:
• You can record two different services while playing back a previously recorded programme.
• You can record two different services while watching one of them using the time-shift feature. See §
for the time-shift feature.
7.1 Recording a programme
Once a recording gets started, a symbol like the left figure will be displayed at the top right of the screen for a few seconds.
When you are watching a different service from the service being recorded, you will see a number on the centre of the symbol, this indicates the order that the recording has started. To record two programmes simultaneously, two tuners are allocated for the recording. Therefore, you can only change to a limited number of services while the two programmes are being recorded.
CAUTION
Do not move the digital receiver nor pull out the power plug while it is running. It may cause damage to recorded programmes. Topfield is not responsible for damages inflicted on files that are stored on the hard drive.
7.1.1
Instant recording
To instantly record a programme you are watching at present, press the button.
Pressing the button will not pause the current recording like it does with a video recorder. Instead, pressing the button will pause the live show and begin time-shifting within the
7
64 Recording and Playback current recording even with the Time Shifting option disabled.
In short, it is still possible to pause a recording, but literally recording continues in the digital receiver.
After a recording has started, pressing the button displays a menu like the left figure, in which you can set the recording duration.
To specify an arbitrary recording duration, set the Duration option as you desire with the and buttons and press the
OK button; the recording will end at the specified time.
If the information about the next programme is provided by the electronic programme guide, the After this program and
After next program options will be enabled. Once the After this program option is selected, the current recording will stop at the time when the current programme is scheduled to end.
Likewise, once the After next program option is selected, the current recording will stop at the time when the next programme is scheduled to end.
7.1 Recording a programme 65
To stop recording, press the button; then a box like the left figure appears, which shows the programmes currently being recorded.
Select recording by using navigation buttons then press button to stop the recording.
While a recording is going on, you can watch or record another service. To additionally record another service, switch to the service you want to record, and press the button. Once a recording is started, it is put on the recorded programme list even though it is not finished yet. The recording file is named the program name if available or after its service name with a suffix of a number.
To view the recorded programme list, press the button or alternatively select the Recording >
Recorded Program
for detailed description about the recorded programme list.
7.1.2
Timer recording
You can set a programme to be recorded at a specific time.
Even if the digital receiver is in standby mode, it will switch into active mode and start recording at a specified time. When the recording comes to the end, the digital receiver will switch back into standby mode again in one minute. However, if you press any button on the remote control or on the front panel even just one time, the digital receiver will not switch into standby mode.
7
66 Recording and Playback
To add a timer recording, select the Recording > Reservation menu, then the timer list will be displayed. To add a new timer event, press the F1 button, and a box like the left figure appears.
Take the following steps:
1. Set the Record option to On to make a recording. If this option is set to Off , the digital receiver will turn on at the specified time but not record; instead, you may record with your video recorder or suchlike in this case.
2. You may have two sources for recording, TV and radio.
Set the Type option to your desired source.
3. Set the Satellite option to the satellite which transmits the service you want. Pressing the button on this option displays a satellite list, from which you can select your desired satellite. Set the Tuner Select option to a tuner to receive your desired service.
4. Set the Service option to the service which provides the programme you want. Pressing the button on this option displays a services list, from which you can select your desired service.
5. Set the Mode option as you desire. There are five timer modes:
One Time means literally ‘one time’.
Every Day means literally ‘every day’.
Every Weekend means ‘Saturday and Sunday every week’.
Weekly means ‘one day every week’.
Every Weekday means ‘from Monday to Friday every week’.
7.1 Recording a programme 67
If your favourite programme is broadcast at weekends and you wish to record every episode of the programme, set the Mode option to Every Weekend .
6. Set the Date option to a desired date, on which the digital receiver will turn on. The date format is day/month/yearday of the week .
Set the Start Time option to a desired time, at which the recording will be started. The time format is hour:minute .
7. Set the Duration option to a desired time, in which the recording will be finished.
8. Pressing the button on the File Name option displays the on-screen keyboard, with which you can specify a file name for the timer recording. If you do not specify anything, it will be named after the service name. See
as to how to use the on-screen keyboard.
9. To set a recording reservation with the above settings, select the OK item; otherwise, it will not be saved and will not occur.
You can also edit or delete timer events in the timer list. To edit a timer entry, put the highlight bar on the entry you want and press button; then appears a box in which you can change its settings in the same manner as making a new one.
To delete a timer event, put the highlight bar on the entry you want to remove and press the F2 button, then you get asked for confirmation. With the choice of Yes , it will be deleted. To delete all timer event, press the F3 button.
You can sort timer events by time with the F4 button.
7
68 Recording and Playback
7.1.3
Scheduling recordings using the programme guide
If the electronic programme guide is properly provided, you can make timer events on it. The instructions on how to make timer recordings using the electronic programme guide are as follows:
1. Press the GUIDE button to display the electronic programme guide.
2. Select a programme you want to record with the navigation buttons.
3. To make a timer event without recording, press the button; the letter P is displayed. To make a timer event with recording, press it once more or alternatively press the button, then the letter R is displayed.
4. Pressing the button once more will cancel the timer.
7.1.4 Recording a time-shifted programme
While watching a programme with time-shift, you can record it by performing the following steps:
1. Press the button to display the progress bar.
2. To move to the beginning of the desired scene, hold down the or button until it is reached.
3. Press the button to start recording. The time-shift buffer from that position onwards will now be recorded.
4. Press the
5. Press the button to stop recording.
button once more to stop time-shift.
for detailed description about the time-shift feature.
7.2 File archive 69
7.1.5
Recording a pay service programme
You can record a pay service programme without the subscription card. However, you need the subscription card to play it back because it has not been descrambled. So it is recommended to record pay service programmes with a proper subscription card so that they can be descrambled and recorded.
In that case, you can enjoy them without the subscription card like free services.
To record a programme of a pay service in descrambled form, take the following steps:
1. Select a programme of a pay service you want to record.
2. Make sure that the subscription card is inserted in the slot on the front of the digital receiver.
3. Start recording.
4. Do not switch to other service nor use time-shift until recording is finished.
NOTE
If you switch to other service or use time-shift in the middle of recording a pay programme, it will be recorded without descrambling from that moment. Even if the recording is only partially descrambled, you need the subscription card to play it back.
7.2
File archive
When a programme is recorded, it is stored as a file on the hard drive of the digital receiver. You can select a recording to play back from the recorded programme list.
7
70 Recording and Playback
Select the Recording >
Recorded Program menu or alternatively press the button to display the recorded programme list.
The file information is comprised of the following elements: file number, file name, recording time, running time, file size and so on.
You can play, move, delete, rename and lock a recording file.
You can also sort the recording files by file name, running time or file size. In addition, you can make a new folder.
7.2.1
To delete a recording
To delete a recording, put the highlight bar on it and press the F4 button, then you get asked for confirmation. With the choice of Yes , it will be deleted.
7.2.2
To sort recordings
To sort the recordings, take the following steps:
1. Press the Option button to display additional options.
2. Set the Sorting option to Alphabetic , Time or Size as you want.
3. Press the EXIT button.
4. They will be sorted by the specified option.
7.2.3 To lock a recording
To lock a recording so that other persons cannot play or delete it, take the following steps:
1. Put the highlight bar on a desired recording.
2. Press the Option button to display additional options.
7.3 Playing back a recording 71
3. Set the Lock option to Locked .
4. Press the EXIT button.
5. The lock symbol ( ) is displayed on it.
If you select a locked recording to play it back, you will be asked for your personal identification number.
7.2.4
To rename a recording
To change a recording’s name, take the following steps:
1. Put the highlight bar on a desired recording.
2. Press the Option button to display additional options.
3. Select the Rename option, and the on-screen keyboard appears. Change the name and save it. See §
as to how to use the on-screen keyboard.
7.2.5
To make a new folder
To make a new folder, press the F2 button, then a new folder named GROUP # is created. You can change its name in the same manner as renaming a recording. See above.
7.2.6
To move a recording to another folder
To move a recording to another folder, put the highlight bar on a desired recording and press the button. If an external hard drive is connected to the digital receiver, you get asked to select between the built-in and external hard drive. Select
Internal , then the folders are listed. Once you choose a folder, the recording is moved to it.
7.3
Playing back a recording
When a programme is recorded, its additional contents such as audio track or subtitle track are also recorded together. So you can enjoy them while playing back a recording.
The instructions on how to play a recording are as follows:
7
72 Recording and Playback
1. Select the Recording > Recorded Program menu or alternatively press the button to display the list of recorded programmes.
2. Put the highlight bar on a desired recording and press the button, then an option box pops up.
3. To play from beginning, set the Starting Position option to Beginning ; to play from the point that you have stopped at the last time, set it to Continuing . To start playback, select the Play item.
4. To stop playback, press the button.
During playback, you can enjoy the following tricks:
• To see the detailed information about the currently played recording, press the button; then the information box appears and shows its file name, running time, programme information, and so on.
• To pause playback, press the press the button.
button. To resume it,
• To view the progress bar, press the button; to hide it, press the button again.
• When the progress bar is hidden, you can move to a desired scene by entering a progress percentage with the numeric buttons.
7.3.1
To navigate using the progress bar
First press the button to display the progress bar.
• To go forward, hold down the ward, hold down the button.
button; to go back-
• If there are no bookmarks, you can jump forward by the minute set to the Jump time Interval option with the F3 button. See §
for that option. Refer to § 7.3.4
as to how to bookmark a position.
• To jump to the beginning, press the button.
7.3 Playing back a recording 73
• To jump to the end, press the button.
• To hide the progress bar, press the button again.
7.3.2
To play in slow motion
To watch in slow motion during a playback, press the button. If you press it repeatedly, the playback speed changes in 4 steps: 1/2, 1/4, 1/8 and 1/16 times. To resume normal speed, press the button.
7.3.3
To play in fast motion
To watch in fast motion during a playback, press the button. If you press it repeatedly, the playback speed changes. To resume normal speed, press the button.
You can play not only forward but also backward in fast motion. To play backward, press the button. If you press it repeatedly, the playback speed changes. To resume normal speed, press the button.
You can change the playback speed in 3 steps (4, 16 and 64
times) or in 6 steps (2, 4, 8, 16, 32 and 64 times). See § 4.7
.
7.3.4
To make a bookmark
You can mark favourite parts of a recording by creating bookmarks and then jump to them in sequence. Bookmarks are stored with the recording so that you can use them again afterwards.
To make bookmarks, take the following steps during playback:
7
1. Press the button to display the progress bar.
74 Recording and Playback
2. To add a bookmark, press the F2 button at a desired scene, then you will see a small pointer appear above the progress bar like in the picture above.
3. To jump forward to the next bookmark, press the button.
F3
7.3.5
To play back a recording repeatedly
You can play back a recording repeatedly both in whole and in part.
To play back in whole, press the button when the progress bar is hidden, then the repetition symbol ( ) is displayed on the information box. To cancel it, press the button again.
To play back in part, take the following steps:
1. Press the button to display the progress bar.
2. Move to the beginning scene of the part you want to play repeatedly by holding down the or button.
3. Press the button, then the pointer starts to blink.
4. Move to the end scene; the selected part is marked in black.
5. Press the
6. To cancel it, press the is displayed.
button again to start repeated playback.
button when the progress bar
7.3.6 To play back recordings in sequence
You can play several recordings continuously in sequence by performing the following steps:
1. Press the button or alternatively select the Recording > Recorded Program menu to display the list of recorded programmes.
2. Select each desired recording with the a recording is selected, it gets numbered.
button. Once
3. Press the button to start playback.
7.3 Playing back a recording 75
4. The selected recordings are played in the sequence that they are numbered.
5. To jump to the beginning of the next recording in the queue, press the button to display the progress bar, then press the button.
7.3.7
To play back a scrambled recording
If you have recorded a programme of a pay service with the subscription card, you can play it as freely like that of a free service. Otherwise you need the subscription card to play it back because it has been recorded without descrambling even though it may have been partially descrambled.
On the recorded programme list, a purely green $ indicates the recording has been wholly descrambled; on the other hand, a yellowish green $ indicates it has been partially descrambled, and a purely yellow $ indicates it has not been descrambled at all.
There are two ways to fully descramble a scrambled recording so that you can play it back without the subscription card later on. One is to make a copy while playing it back to the end; the other is to make the copy job to be carried out as a timer event.
The first method is very easy to carry out. When you select an entry to play in the recorded programme list, the playback option box appears. Simply set the Descramble Mode option to Auto Recording . Then a descrambled copy will be created while you are watching it.
NOTE
You should get the scrambled recordings descrambled as soon as possible. You could lose the chance to descramble forever if you hang around too long because broadcasting operators frequently changes the key signal for descrambling.
7
76 Recording and Playback
7.4
Editing a recording
You can cut out or save a part such as commercial from a recording by performing the following steps:
1. Press the button to display the progress bar during a playback.
2. Move to the beginning scene of the part you want to edit by holding down the or button.
3. Press the button, then the pointer starts to blink.
4. Move to the end scene; the part is marked in black.
5. Press the button, then the edit options are displayed.
6. If you choose the Cut option, it will be removed from the original recording and discarded.
7. If you choose the Save option, the cut will be saved in a new file which is named after the original recording with a suffix of ‘CUT’ and a number.
NOTE
Edited files cannot be fast-forwarded and rewinded. The
F4 and F3 buttons are still active for this feature.
7.5
Copying a recording
You can record the file in whole or in part during a playback by performing the following steps:
1. Start playback of a recording you want.
2. Move to a scene from which you want to start copying by holding down the or button.
3. Press the button, then it will be copied in a new file which is named after the original recording with a suffix of ‘COPY’ and a number.
4. To stop copying, press the button.
7.6 Formatting the hard disk 77
7.6
Formatting the hard disk
If a new hard drive is installed, it must be formatted because you can neither record nor use time-shift with an unformatted hard disk.
You can delete permanently all contents stored in a hard drive by formatting it. Select the Installation > System Recovery >
Format Hard Disk menu, and then select the hard drive you want to format. To format the built-in hard drive, select the option to Internal ; otherwise to format the external hard drive which is connected to the digital receiver, select the option to
External . With pressing the button, you get asked for confirmation. Formatting will start with the choice of Yes .
NOTE
The hard drive on the digital receiver will be formatted in the JFS file system.
7
78 Entertainment
Chapter 8
Entertainment
This digital receiver provides several special features for entertainment.
NOTE
To fully enjoy all of the features described in this chapter, you had better configure the network settings properly. As
to how to configure the network settings, refer to § 9.2
.
8.1
Copying files
NOTE
If your external hard drive is formatted in the FAT16/32 or
NTFS, it can only be read. To enable to write and read, the hard drive must be formatted in the JFS or Ext2/3 file system. As to how to format hard drive on the digital receiver, refer to §
You can copy files between the built-in hard drive and external hard drive.
8.1 Copying files 79
To copy from the internal to the external hard drive take the following steps:
1. Connect an external hard drive to the digital receiver.
2. Press the button and then press the or button to select a desired file list except the External list.
3. Put the highlight bar on a desired file and press the button, then you get asked to select between the built-in and external hard drive.
4. Select External , then the folders are listed.
5. Select a destination folder and press the button, then the selected file will be copied into the external hard drive.
To copy from the external to the internal hard drive, take the following steps:
1. Connect an external hard drive to the digital receiver.
2. Press the button and then press the or button to select the External List.
3. Put the highlight bar on a desired file and press the button, then the list of folders gets displayed.
F3
4. Select a folder in the built-in hard drive.
5. Press the button, then the selected file will be copied into the built-in hard drive.
8
80 Entertainment
8.2
Playing back MP3 files
You can enjoy music or audio books in MP3 format on the digital receiver. Refer to §
as to how to copy a file from an external hard drive into the built-in hard drive of the digital receiver.
To play an MP3 file, take the following steps:
1. Select the Entertainment > MP3 Player or press the button and then the or button to display the MP3 file list.
2. Put the highlight bar on a desired file; if you want to play several files, select them with the F1 button.
3. Press the button to start playback.
4. To stop playback, press the button.
To play all MP3 files in a subfolder, put the highlight bar on a desired folder, and press the button. To change from one file to the next or previous file, use the or buttons.
8.3
Playing back a video file
You can play back media files such as photos, videos and music with this digital receiver. Media file formats that you can play back with the digital receiver are as follows:
• video: DivX, XviD, vob, mkv, mp4, and avi;
• photo: jpg;
• music: MP3.
8.4 Network game 81
Refer to §
as to how to copy a file from an external hard drive into the built-in hard drive of the digital receiver. To play a video file, take the following steps:
1. Select the Entertainment > Media Player or press the button, and then the or button to display the video file list.
2. Put the highlight bar on a desired file; if you want to play several files, select them with the F1 button.
3. Press the button to start playback.
4. If it has its own one or more subtitle files, you can select one you prefer with the button to display subtitle.
5. To stop playback, press the button.
NOTE
This digital receiver supports only version 3.x, 4.x, 5.x, and
6.x of the Divx format.
8.4
Network game
You can play a network game named Battle Tank on the digital receiver. You can play the game by yourself or with others via the network.
8.4.1 Single mode
To play the game in single mode, select the Entertainment >
Game > Battle Tank (Single) , then take the following steps:
8
82 Entertainment
1. Select game mode.
2. Select a character.
3. Buy items as you desire.
4. Select a map. If you play the game by yourself, you do not need to select a map.
5. Start playing.
If you want to out of the game while palying, press the EXIT button on the remote control.
Selecting game mode
When you select the Entertainment > Game > Battle Tank (Single) , you should see a screen like the left figure.
You can select game mode as you desire. If you want to out of the game, select the EXIT option.
There are two modes as below:
Single play playing by yourself.
Double play playing with another user.
Select a mode with the button.
and buttons and press the
Selecting a character
8.4 Network game 83
After selecting game mode, you should see a screen like the left figure.
Select a character referring to Table
.
If you select the , a character will be chosen randomly.
When you play the game for the first time, you can select only two characters. To get a new character, you have to play in single mode and clear all 13 stages.
Table 8.1: Buttons for selection
Action 1 Player 2 Player
Left
Right
Up
Down
Select OK startbutton
F2
You can see the selected character’s information of the 1 Player on the left bottom of the screen. Also you can see the selected character’s information of the COM or 2 Player on the right bottom of the screen. You have to select a character in 30 seconds; otherwise, the character will be selected automatically.
8
84 Entertainment
Buying items
After selecting a character, you should see a screen like the left figure. Buy a item referring to
Table
When you finish selecting items, select the READY on the screen as follows:
Selecting a map
• 1 Player : Select the READY using the MENU button and press the button.
• 2 Player : Select the READY using the F1 button and press the F2 button.
After buying items, you should see a screen like the left figure.
Select a map with the and buttons.
After selecting a map, select the
START on the screen.
Select the START using the MENU button and press the button. If you play the game by yourself, you do not need to select a map.
8.4 Network game 85
Playing the Battle Tank
When you start the game, you should see a sceen like the following figure. Play the game referring to Table
.
.
.
.
1
.
.
The character’s weapons.
2
.
.
The angle of the character.
3
.
.
You can see the direction and speed of wind.
4
.
.
You can see the information of the character as follows:
ENERGY displays the character’s energy.
POWER displays the power of shot.
MOVE displays the movement bar.
.
5
.
.
You can check your position and enemy’s position on this
.
mini-map.
.
.
6
.
.
You can use those items during playing game.
7
.
.
Displays current player.
8
.
.
Displays the turn time. If the time is over, turn will be changed to the other player.
8
86 Entertainment
Table 8.2: Buttons for playing
Action
Changing weapon
Changing angle
Moving character
Using items
Skipping turn
Changing view of map
Firing a shot
Remote Control
3 4
7 8
5
9 startbutton
OK
8.4.2
Network mode
To play the game in network mode, select the Entertainment
> Game > Battle Tank (Network) , and then take the following steps:
1. Select a game server.
2. Log on to the game server.
3. Joining a game.
4. Selecting a character, map and items for playing.
5. Start playing.
NOTE
Refer to the Battle Tank user guide as to how to play Battle
Tank in network mode. You can download it from the Topfield website, http://www.i-topfield.com
.
87
Chapter 9
Accessing via Network
NOTE
The following section describes complex functions that should only be used by owners with advanced computer knowledge.
This digital receiver provides features of web service and FTP service, by which through the network you can make scheduled recordings, or transfer recording files to your computer.
Here you need a router, which will connect the digital receiver to your computer or to the Internet.
To use the network features of the digital receiver, you should take the following steps:
1. Configuring your router for the digital receiver.
2. Configuring the network settings on the digital receiver.
3. Accessing the home page of the digital receiver. Refer to
for detailed description about things you can do by using the web service of the digital receiver.
4. Accessing the FTP Server of the digital receiver.
9
88 Accessing via Network
NOTE
The web server and FTP server of the digital receiver do not work in standby mode. So it must be powered up at all times if you wish to use the web service at any time.
9.1
Configuring the router
In this section, the setup program of WRT54G , which is a router manufactured by Linksys , will be referred to as an example of how to configure the router for network access.
NOTE
For detailed description about how to set up the router, refer to the manual of your router.
9.1.1
To access within the local area network
Once your router is powered up, a local area network gets created whether or not it is connected to the Internet.
You can let the router automatically assign a dynamic IP address to the computers or devices connected to the network by enabling the DHCP server of the router. In this case, you can access the digital receiver with the IP address which is assigned to the digital receiver by the router.
If the digital receiver reboots, a new dynamic IP address will be assigned to it. You had better assign a static IP address to the digital receiver to avoid this inconvenience. As to how to assign a static IP address, refer to the manual of your router; as to how to specify a static IP address on the digital receiver, see §
9.1 Configuring the router 89
9.1.2
To access over the Internet
When you are away from home, you can access the digital receiver inside your home if your router is configured to route access to the digital receiver by means of port forwarding. Via this feature, your router will lead you to the digital receiver when you access your router with its IP address.
Your router may be assigned to a dynamic IP address by an
Internet service provider. So if the router has rebooted, you cannot access it unless someone in your home can inform you of the changed IP address. However, many routers support
Dynamic Domain Name System (DDNS) service, which can settle this problem. The following image is an example of one such DDNS service provider.
9
If you use a DDNS service, you can access your router with a domain name. The instructions on how to use the DDNS service are as follows:
1. Make an account on a web site providing DDNS service,
90 Accessing via Network which should be supported by your router.
2. Configure your router with the account so that it can communicate with the web site.
Whenever a new dynamic IP address is assigned to the router, it will inform the DDNS service provider of the new IP address. This makes it possible that you access the router with a domain name at any time.
9.2 Configuring the network setting on the digital receiver
You should configure the network settings to enable the web service and FTP service.
Select the Installation > Network Setting > IP Setting menu.
The easiest way to configure the network settings is to assign a dynamic IP address to the digital receiver by setting the Connection Type option to DHCP .
When the digital receiver is restarted, the dynamic IP address could be changed more often than not, and you will have to check what it is to access the digital receiver. To avoid this
9.3 Accessing the web server 91 cumbersome thing, you had better assign a static IP address rather than dynamic one.
To assign a static IP address, set the Connection Type option to Static , then the IP Address , Subnet Mask , Gateway , Primary
DNS and Secondary DNS options become enabled. You have to set these options to match with the configuration of your router.
9.3 Accessing the web server
To Access to the web server, set the Installation > Network Setting > Web Server option to Enable .
Select the Installation > Network Setting > User Info menu.
At this time, you have to enter Personal Identification Number (PIN). Then set the User ID and Password options as you desire. And select OK to save the settings. When you access to the web server, you will be asked for the account that was made with these options.
In way of the web server of the digital receiver, you can do the following:
• Download recording files.
• Create new recording timers.
• View information about the programme currently being recorded.
• View the system information of the digital receiver.
To access the digital receiver’s home page through your web browser, enter its IP address, or domain name if you use a
DDNS service. For the DDNS service, refer to the user manual of your router.
9
92 Accessing via Network
You cannot only download but also upload recording files or
MP3 files in the File Management page.
However, if you wish to download or upload a file of which size is 2 gigabyte or more, it is recommended using the FTP server rather than the web server.
9.4 Accessing the FTP server 93
NOTE
The maximum number of user connections is one. This means that you cannot access the web server while someone else is occupying it.
9.4
Accessing the FTP server
To Access to the FTP server, set the Installation > Network Setting > FTP Server option to Enable .
Select the Installation > Network Setting > User Info menu.
At this time, you have to enter Personal Identification Number (PIN). Then set the User ID and Password options as you desire. And select OK to save the settings. When you access to the FTP server, you will be asked for the account that was made with these options.
NOTE
You can access the FTP server with an anonymous account.
However, with an anonymous account you can only download files. You cannot upload files.
You need an FTP client program to access the FTP server of the digital receiver.
9
94 Accessing via Network
You can log into the FTP server with the user name and password specified in the Installation > Network Setting > User
Info menu.
NOTE
The maximum number of user connections is one. This means that you cannot access the FTP server while someone
else is occupying it.
9.4 Accessing the FTP server 95
9
96 Firmware Update
Chapter 10
Firmware Update
The digital receiver has a stable and convenient firmware to use. However, once in a while a new firmware may be released to improve the digital receiver. You can get the latest firmware and the firmware update tool, which runs on most versions of Windows, from the Topfield website, http:
//www.i-topfield.com
.
10.1
From a memory stick
If you have a USB memory stick, you can update the firmware from it by taking the following steps:
1. Download a new firmware from the Topfield website.
2. Copy the firmware file to your memory stick.
3. Insert the USB memory stick into the USB port on the digital receiver.
4. Select the Installation > Firmware Upgrade > USB
Firmware Upgrade menu, and the files in the USB memory will be listed.
10.2 From the firmware server via the Internet 97
5. Place the highlight bar on the right firmware file and press the button, and a countdown will be displayed on the front display of the digital receiver.
6. When the message of ‘END’ appears, restart the digital receiver.
10.2
From the firmware server via the Internet
You can update the firmware from the firmware server which is being run by Topfield via the Internet. Make sure that the digital receiver is connected to your router before configuring the network settings on the digital receiver.
NOTE
For detailed description about how to set up the router, refer to the manual of your router.
Select the Installation >
Firmware Upgrade > Network Firmware Upgrade menu.
You should see a screen like the left figure.
To enable the digital receiver to update the firmware automatically when a new firmware is available, set the Automatic Upgrade option to Enable . Otherwise if you want to do that by yourself, select the Start firmware upgrade option, then you get asked for confirmation. With the choice of Yes , it will check up whether a new firmware is available, and it starts firmware update if any.
10
98 Firmware Update
10.3
Over the air
You can get a new firmware over the air.
Select the Installation > Firmware Upgrade > OTA
Firmware Upgrade menu. You should see a screen like the left figure.
Satellite
Frequency
Astra (19.2° E)
12603 MHz
Symbol Rate 22000 KS/s
Polarisation Horizontal
PID 347
On the left table is presented the transponder information appointed by the manufacturer, Topfield, for firmware update.
This transponder information can be changed. You can get the information from the website, http://www.i-topfield.com
.
Selecting the Start command starts firmware update.
99
Appendix A
Universal Remote Control
The universal remote control allows you to operate the most important functions such as power on/off and volume control on your television, audio-video receiver, or DVD player. For the use of buttons, refer to Table
. To be able to control the device, you must adapt the remote control to the device first.
Take the following steps:
1. Turn on the device you want to operate.
2. Point the remote control at the remote sensor on the device.
3. Hold down the and device button simultaneously for two seconds until the light flashes on. For example, if you want to operate your television with the remote control, press the and buttons simultaneously.
4. Find the manufacturer of the device from the codes list.
5. Enter the three-digits code you have found for your device and press the button.
6. If the setting is finished correctly, the light blinks twice and the device will be turned off. Otherwise, repeat from the step 2 .
If you cannot find a code for your device, do as follows:
A
100 Universal Remote Control
1. Turn on the device you want to operate.
2. Point the remote control at the remote sensor on the device.
3. Hold down the and device button simultaneously for two seconds until the light flashes on. For example, if you want to operate your television with the remote control, press the and buttons simultaneously.
4. Press the CHANNEL + or CHANNEL
− button until the device turns off.
If you want to find out the number which you set for your device, do as follows:
1. Hold down the and device button simultaneously for two seconds. For example, if you want to know the number which you set for your television, press the and buttons simultaneously.
2. Press the button. Then the light will show the number with blinks. For example, if the number is 3 , the light will blink three times. In case of 0 , the light will blink ten times.
You can reset the settings by doing as follows:
1. Hold down the and buttons simultaneously for more than five seconds.
2. Each device button blinks three times in the following order: PVR
→
DVD
→
AUX
→
3. After that, all settings will be reset to the manufacturer’s factory settings.
NOTE
Some buttons may not work properly depending on a device.
If your device code is not listed on the following pages, you will not be able to use this remote as a universal remote for your specific device.
Table A.1: Operating buttons
PVR
VOLUME +
VOLUME −
CHANNEL +
CHANNEL −
0
1
4
5
2
3
8
9
6
7
OK
MENU
GUIDE
EXIT
TV DVD AUX
Power on/off
Volume up
Power on/off
Volume up
Power on/off
Volume up
Volume down Volume down Volume down
1
2
3
4
Mute
X
X
0
5
6
7
8
9
TV INPUT
X
X
X
Left
Right
X
X
X
X
X
X
X
X
5
6
7
8
9
X
1
2
3
4
X
X
X
0
Up
Down
OK
Left
Right
Menu
Guide
Exit
Stop
Rewind
Pause
Play
Fast forward
Mute
Channel up
Channel down
X
1
2
3
4
5
6
7
8
9
X
X
X
X
X
Right
X
X
Exit
X
X
X
X
X
101
A
102 Universal Remote Control
A.1 Code list for television sets
.
A
ACCENT
ACEC
ACURA
ADMIRAL
ADYSON
AGASHI
AGEF
AIKO
AIM
AIWA
AKAI
AKIBA
AKITO
AKURA
ALARON
ALBA
ALBIRAL
ALCYON
ALLORGAN
ALLSTAR
AMPLIVISION
AMSTRAD
ANAM
ANGLO
049, 063
112
195
065, 076, 163, 171, 190,
307, 324, 369
379
076, 379
324
049, 063, 076, 102, 141,
172, 195, 225, 379
049, 063
376, 377
019, 049, 050, 055, 063,
076, 102, 107, 123, 133,
139, 141, 150, 172, 174,
182, 195, 209, 225, 326,
333, 379, 428, 432, 433,
437
006, 049, 063, 123, 380
049, 063, 106
006, 049, 076, 096, 123,
195, 419, 426
042, 334
018, 044, 049, 050, 107,
123, 134, 163, 179, 184,
195, 225, 228, 232, 239,
379, 413, 421, 431
121, 326, 372
407
050, 094, 236, 334
049, 063
113, 379, 421, 425
004, 011, 049, 063, 076,
123, 131, 172, 195, 225,
426
049, 063, 195
076, 195
ANITECH
ANSONIC
APOLLO
ARC EN CIEL
ARCAM
ARDEM
ARISTONA
A.R.SYSTEM
ARTHUR MARTIN
ASA
ASBERG
ASORA
ASTRA
ASUKA
ATLANTIC
ATORI
AUCHAN
AUDIOSONIC
AUDIOTON
AUSIND
AUTOVOX
AWA
AYOMI
.
BAIRD
BANG & OLUFSEN
049, 063, 076, 195, 407
045, 049, 063, 107, 112,
195, 210, 242, 391, 413,
421
165
029, 034, 074, 182, 186,
415, 424
029, 379, 424
392
049, 050, 063, 065, 079,
112, 158, 160, 188
049, 063
075, 107, 127, 133, 136,
139, 148, 153, 307, 425
003, 020, 065, 078, 080,
091, 117, 146, 171, 197,
235, 307, 319, 324, 341,
375, 406, 408
049, 063, 407
195
195
006, 050, 076, 123, 379
049, 050, 063, 113, 236,
242, 379
195
107, 425
031, 049, 063, 074, 076,
195, 213, 379, 392, 421
050, 076, 379, 392, 421
075, 090, 407
050, 071, 078, 079, 080,
083, 090, 147, 156, 236,
254, 305, 319, 323, 324,
379, 407, 413, 416
018, 049, 063, 131, 195,
206, 320, 379, 426, 433
411
074, 102, 182, 209, 321,
329, 379, 409
324
A.1 Code list for television sets 103
BARCO
BASIC LINE
BASTIDE
BAUR
BAZIN
BEKO
107, 355, 371, 372, 422
006, 031, 049, 107, 123,
159, 195, 207, 226
379
012, 049, 053, 063, 107,
150, 172, 244, 245, 246,
247, 301, 357, 414, 416
379
063, 184, 240, 241, 392,
421, 433
BEON
BEST
BESTAR
BINATONE
049, 063, 163
213, 421
049, 063, 421
BLACK STAR
BLACKTRON
BLACKWAY
BLAUPUNKT
379
413
006
006
BLUE SKY
019, 053, 057, 060, 113,
118, 244, 245, 246, 247,
248, 249, 308
006, 049, 063, 123, 195,
232
006
413
BLUE STAR
BONDSTEC
BOOTS 050, 106, 379
BPL
BRITANNIA
006, 049, 063
BRANDT
BRANDT ELECTRONIQUE 029, 034, 074, 182, 186
BRINKMANN 049, 063, 163
BRION VEGA
074, 182, 218, 415, 424,
436
049, 063, 065, 083, 167,
172, 173, 181, 196, 324,
356
379
BROTHER
BRUNS
BSR
BTC
076
056, 065, 324
094, 107, 110, 139, 168,
314
123
BUSH 006, 018, 049, 076, 094,
106, 107, 123, 134, 139,
142, 143, 172, 179, 195,
209, 223, 225, 226, 232,
239, 307, 379, 416
107, 147, 168 BUSH (UK)
.
CAPSONIC
CARAD
CARENA
CARREFOUR
CARVER
CASCADE
CASIO
CATHAY
076
049, 063
049, 063, 380
018, 406
177
049, 063, 064, 195
049, 063
049, 063
CCE
CENTURION
CENTURY
049, 063, 379
049, 063
044, 054, 065, 163, 189,
324, 411, 413
CGE 002, 044, 054, 090, 093,
094, 096, 107, 139, 142,
163, 168, 189, 369, 407,
413, 421
111 CIHAN
CIMLINE
CITY
CLARIVOX
CLATONIC
CLATRONIC
031, 123, 134, 195
195
056, 121, 125, 163, 406
076, 123
031, 045, 049, 063, 076,
113, 123, 195, 225, 379,
407, 413, 421, 431
379 CMS HIGHTEC
COMTEL
CONCORDE
CONDOR
CONTEC
111, 125
195
006, 045, 049, 050, 063,
113, 163, 195, 210, 379,
413, 421
018, 131, 195, 206, 302,
COSMEL
CROSELY
320, 379
CONTINENTAL EDISON 029, 034, 074, 182, 186,
232, 415, 424
195, 213
044
A
CS ELECTRONICS
CTC
CTC CLATRONIC
CURTIS MATHES
CYBERTRON
.
D
DAENYK
DAEWOO
DAINICHI
DANSAI
DANSETTE
DANTAX
DATSURA
DAWA
DAYTRON
DE GRAAF
DECCA
DECCA (UK)
DEITRON
DENKO
DENON
DER
DERWENT
DESMET
DIAMANT
DIGILINE
DIXI
DOMLAND
DORIC
DREAN
104 Universal Remote Control
CROSLEY
CROWN
054, 065, 090, 093, 094,
104, 107, 139, 324, 407,
413
049, 063, 154, 163, 170,
195, 209, 232, 372, 407,
419, 421, 431
031, 123, 379, 413
413
045
126, 190, 212
123
DTS
DUAL
DUAL-TEC
DUMONT
DUMONT-FINLUX
DUX
DYNATRON
.
ELBE
042
063, 123, 140, 145, 161,
193, 195, 379
123, 379
063, 076, 141, 195, 379
426
392, 421
209
049, 063
049, 063, 195, 226
023, 107, 122, 139, 209,
307
049, 063, 102, 106, 111,
120, 200, 331, 379
046, 050, 102, 106, 131
049, 063
076
126, 212
321
105
049, 063, 113
049, 063
049, 063
063, 195, 379, 413
423
104, 105
049, 063
ELBIT
ELCIT
ELECTA
ELECTRO TECH
ELEKTA
ELEKTRONSKA
ELG
ELIN
ELITE
ELMAN
ELTA
EMERSON
EMPEROR
ERRES
ESC
ETRON
EURO-FEEL
EUROMANN
EUROPA
195
049, 050, 063, 095, 107,
139, 156, 168, 182, 242,
243, 379, 414, 416, 423,
424
195, 168, 050, 040
045, 065, 080, 102, 139,
146, 319, 324, 339, 341,
375, 379, 406, 408
020, 045, 061, 075, 078,
091, 104, 117, 147
049, 063, 112
049, 063
049, 063, 107, 121, 123,
172, 194, 210, 242, 337,
368, 369, 391, 411, 421,
435
111
045, 046, 047, 062, 065,
104, 107, 150, 168, 324,
413
006, 076
195
006, 076
318
049, 063
003, 020, 049, 063, 107,
139, 172, 195, 379, 408,
416
031, 049, 063, 123
045, 168
076, 195, 379
004, 006, 042, 044, 049,
063, 065, 113, 225, 324,
327, 406, 413
006
063, 112
049, 063
049, 063, 107, 139, 195
076
049, 063, 076, 379, 421
049, 063
EUROPHON
EXPERT
EXQUISIT
.
F
.
.
FAMILLY LIFE
FENNER
FERGUSON
FIDELITY
FIDELITY (UK)
FILSAI
FINHER
FINLANDIA
FINLUX
FIRST LINE
FISHER
FLINT
FNR
FORGESTONE
A.1 Code list for television sets 105
044, 045, 046, 049, 050,
063, 068, 107, 120, 168,
318, 336, 379, 413
107, 236, 242, 425
049, 063, 413
FORMENTI
FORMENTI-PHOENIX
FORTRESS
FRABA
FRIAC
FRONTECH 049, 063
063, 195
001, 032, 050, 073, 074,
076, 080, 082, 102, 103,
121, 158, 182, 204, 218,
244, 245, 246, 251, 306,
319, 321, 322, 328, 329,
344, 409, 411, 436
049, 050, 063, 076, 107,
158, 225, 307, 364, 379
133
050, 379
359
033, 122, 139, 172, 197,
209, 223, 307, 375, 419
003, 020, 042, 045, 049,
061, 063, 075, 078, 080,
090, 091, 102, 104, 107,
117, 139, 146, 147, 163,
197, 210, 235, 319, 324,
339, 341, 375, 379, 406,
407, 408, 428, 429, 437
045, 049, 063, 094, 102,
107, 134, 139, 191, 195,
209, 210, 379, 411, 413,
416
018, 041, 050, 056, 065,
069, 102, 104, 107, 117,
139, 143, 156, 172, 189,
206, 209, 320, 324, 379,
408, 414, 416, 421
031, 049, 063, 102, 123,
379, 380
045
158
FUJITSU
FUJITSU GENERAL
FUNAI
.
G
GALAXI
GALAXIS
GBC
GE
GEANT CASINO
GEC
GEC (UK)
GELOSO
GENERAL
GENERAL TECHNIC
GENEXXA
GOLDHAND
GOLDLINE
GOODMANS
GORENJE
GPM
GRADIENTE
090, 107, 113, 139, 307,
324, 379, 407
050, 075, 104, 113, 148,
307
190, 324
049, 063, 421
045, 049, 063, 195
076, 139, 195, 307, 379,
413, 416
042, 045, 102, 107, 195,
236, 327, 379
195, 379
042, 076, 094, 314, 327
045, 049, 063
045, 049, 063, 163, 421
031, 104, 107, 139, 143,
168, 195
006, 074, 182, 218
107, 425
049, 063, 102, 104, 107,
120, 171, 172, 192, 307,
379, 416
046, 050, 102, 107, 150,
162, 192
031, 047, 062, 104, 107,
139, 168, 171, 195, 307,
413
064, 074, 182
195
049, 063, 123, 307, 426
379
213
018, 042, 063, 076, 102,
134, 139, 141, 143, 155,
182, 195, 218, 225, 232,
379, 428
124, 189, 421
123
049, 063, 170, 177
A
106 Universal Remote Control
GRAETZ
GRANADA
GRANADA (UK)
GRANDIN
GRONIC
GRUNDIG
.
H
HALIFAX
HAMPTON
HANIMEX
HANSEATIC
HANTAREX
HANTOR
HARLEY DAVIDSON
HARWOOD
HAUPPAUGE
HCM
HEMA
HEMMERMANN
HIFIVOX
HIGASHI
HIGHLINE
049, 063, 090, 104, 136,
139, 153, 159, 162, 171,
172, 198, 225, 307
013, 018, 033, 041, 063,
102, 104, 105, 112, 120,
148, 164, 165, 171, 209,
218, 237, 238, 240, 241,
252, 307, 325, 363, 379,
407, 418, 419
046, 050, 090, 107, 139,
143, 162, 307
006, 031, 049, 063, 107,
113, 123, 195, 379, 380,
425, 431, 435
045
005, 019, 049, 053, 063,
080, 090, 101, 115, 118,
166, 232, 244, 245, 246,
247, 248, 249, 308, 340,
341, 406, 407
HIKONA
HINARI
HISAWA
HIT
HITACHI
HITASHI FUJIAN
HITSU
HORNYPHON
HOSHAI
HUANYU
HYGASHI
HYPER
076, 379
379
094
006, 018, 049, 050, 063,
094, 104, 107, 113, 143,
172, 195, 324, 379, 391,
416, 421, 423
045, 046, 049, 063, 195
049, 063
042
049, 063, 195, 426
049, 063
006, 031, 049, 063, 076,
123, 163, 195, 379, 426
195, 379
150, 416
029, 034, 074, 182, 186,
304, 424
050
049, 063, 076
HYPERSONIC
HYPSON
.
I
.
.
IBERRIA
ICE
ICES
IMPERIAL
INDIANA
INGELEN
INGERSOL
123
004, 018, 042, 049, 066,
094, 107, 119, 123, 133,
134, 139, 143, 179, 195,
209, 232, 307, 327
006, 031, 123, 380, 425
342
007, 009, 018, 020, 023,
033, 049, 050, 063, 074,
086, 102, 104, 107, 110,
126, 127, 139, 143, 150,
162, 168, 171, 176, 182,
185, 186, 192, 212, 218,
231, 304, 307, 309, 315,
333, 334, 344, 361, 379,
416, 418
013, 164, 252
123, 195, 379
049, 063, 112
123, 379
379
379
050, 168, 195, 254, 361,
379, 413
172
006, 049, 063, 076, 379,
380, 411, 425
049, 063
049, 063, 076, 123, 195,
225, 379
123, 379
002, 044, 049, 054, 063,
090, 093, 094, 107, 142,
163, 168, 189, 301, 307,
369, 407, 413, 416, 421
049, 063
090, 104, 136, 139, 153,
159, 162, 171, 198, 232,
435
195
INNO HIT
INNOVATION
INTERACTIVE
INTERBUY
INTERFUNK
INTERVISION
IRRADIO
ISUKAI
ITC
ITS
ITT
ITT-NOKIA
ITV
.
J
.
.
JEAN
JEC
JET POINT
JVC
A.1 Code list for television sets 107
044, 046, 049, 050, 063,
066, 102, 123, 155, 195,
217, 379, 407, 413
049, 063
210
076, 195, 413
049, 063, 065, 067, 074,
090, 104, 107, 112, 139,
150, 153, 159, 172, 182,
301, 302, 324, 363, 421
006, 045, 049, 055, 063,
076, 107, 123, 225, 232,
378, 379, 380, 381, 382,
384, 385, 386, 387, 388,
389, 413, 421, 423
031, 049, 063, 066, 075,
090, 123, 155, 195, 254,
407, 413
006, 049, 063, 123
379
006, 031, 049, 063, 076,
123, 225, 379
042, 090, 107, 117, 134,
139, 150, 157, 159, 162,
165, 171, 172, 193, 197,
198, 209, 301, 307, 343,
350, 375, 416, 428
042, 090, 097, 104, 107,
117, 134, 136, 139, 150,
153, 159, 162, 165, 171,
172, 185, 193, 197, 198,
209, 301, 307, 343, 350,
375, 416, 428, 433, 435,
437
049, 063, 076, 413
.
KAISUI
KAMOSONIC
KAMP
KAPSCH
KARCHER
KATHREIN
KAWASHO
KB ARISTOCRAT
KENDO
KENNEDY
KINGSLEY
KLARMAX
KNEISSEL
KOLSTER
KONKA
KORPEL
KORTING
KOSMOS
KOTRON
KRAKING
KRIESLER
018
141
365
018, 103, 123, 129, 143,
158, 170, 174, 182, 225,
364, 409, 433
KTV
KYOSHU
KYOTO
KYUSHU
.
L
.
.
LECSON
LEMAIR
049, 063
210
006, 031, 049, 050, 063,
123, 195, 207, 379, 380
050
379
107, 172, 236, 242, 408
003, 006, 020, 031, 045,
049, 050, 063, 068, 076,
107, 195, 207, 217, 421,
435
124
379
107
044, 045, 049, 055, 063,
134, 172, 210, 413, 421,
435
071, 079, 104, 107, 139,
236, 305, 323, 369
379
371, 372
049, 063, 210, 242, 369,
391, 411, 421, 435
045, 049, 063, 416
031, 049, 063, 123, 225,
232
049, 063
027, 065, 094, 113, 324,
421
049, 063
076, 426
411
050, 063, 065, 079, 112,
158, 160, 188
050, 379
076, 163
107
426
A
108 Universal Remote Control
LENCO
LENOIR
LESA
LEYCO
LEYEO
LG (GOLDSTAR)
LIESENKOTTER
LIFETEC
LLOYD’S
LOEWE
LOEWE OPTA
LOGIC
LOGIK
LOGIX
LUMA
LUMATRON
LUX MAY
LUXOR
LYCO
.
M
M ELECTRONIC
MAAZ
MADISON
MAGNADYNE
049, 063, 107, 195, 408
050, 195
413
049, 063, 076, 094, 102,
431
076
023, 049, 050, 055, 063,
107, 139, 152, 155, 168,
172, 195, 202, 203, 219,
254, 379, 413, 421
049, 063, 112
049, 063, 076, 123, 195
195
049, 063, 089, 324, 391,
421
035, 046, 049, 052, 063,
065, 120, 144, 213, 324
331
032, 131, 158, 225, 364
195
063, 107, 110, 133, 171,
172, 195, 210, 236, 242,
307
049, 063, 076, 107, 172,
236, 242, 329, 379
049, 063, 195
042, 050, 090, 107, 122,
127, 133, 139, 150, 155,
159, 165, 172, 185, 197,
209, 307, 312, 330, 416,
418, 428, 429
076
MAGNAFON
MAGNAVOX
MANDOR
MANESTH
MANHATTAN
MARANTZ
MARELLI
MARK
MASUDA
MATSUI
MAXIMAL
MAXWELL
McMICHAEL
MEDIATOR
MEDION
MEGAS
MEGATRON
MELECTRONIC
MELVOX
MEMOREX
MEMPHIS
MERCURY
METZ
003, 235, 375
371, 372
049, 063
045, 046, 047, 062, 065,
104, 107, 120, 139, 150,
168, 318, 324, 413
MICROMAXX
MINERVA
MINOKA
MISTRAL
045, 046, 050, 068, 075,
090, 120, 235, 336, 379,
407
018, 042, 049, 063
076
063, 076, 094, 113, 134,
141, 379
049, 063, 195
063
324
063, 195, 379
123, 195, 225
001, 004, 018, 041, 049,
050, 063, 094, 100, 102,
106, 107, 131, 134, 141,
143, 150, 171, 179, 180,
195, 209, 218, 225, 229,
232, 244, 245, 246, 307,
314, 331, 379, 380, 416,
431
119, 139
371, 372
192
049, 063, 112
049, 063, 195
435
126, 212
003, 049, 063, 074, 182,
195, 210, 375, 379, 408,
413, 416, 428, 429
425,
099, 195
102, 195, 213
049, 063, 195
019, 049, 051, 053, 065,
067, 070, 092, 118, 244,
245, 246, 247, 324, 412
049, 063, 195
019, 053, 080, 090, 118,
232, 244, 245, 246, 247,
248, 249, 340, 341, 406,
407
049, 063, 419, 426
158
MITSUBISHI
MIVAR
MONACO
MORGAN’S
MOTION
MOTOROLA
MTC
MTEC
MULTISTANDARD
MULTITEC
MULTITECH
MURPHY
MURPHY (UK)
MUSIKLAND
.
N
NAD
NAIKO
NAKIMURA
NAONIS
NAT
NATIONAL
NEC
NECKERMANN
NEDIATOR
A.1 Code list for television sets 109
013, 018, 019, 021, 049,
063, 065, 105, 124, 131,
132, 143, 157, 164, 183,
190, 244, 245, 246, 252,
326, 330, 331
043, 046, 050, 058, 072,
081, 090, 120, 155, 318,
337, 379, 391, 407, 421,
434
195
049, 063
407
190
049, 063, 379, 416, 421
106
045
049, 063, 195
031, 045, 046, 049, 050,
063, 120, 189, 195, 379,
392, 413, 416, 421
102, 104, 105, 107, 117,
171, 254, 307, 379, 408
162
123
NEI
NESCO
NETSAT
NETWORK
NEUFUNK
NEW WORLD
NEWTECH
NICAMAGIC
NIKKAI
NIKKIA
NOBLEX
NOBLIKO
NOGAMATIC
NOKIA
NORDMENDE
063, 125, 225
042, 413
049, 063
213
049, 063, 195, 435
123
049, 050, 063, 182, 195,
379
379
018, 049, 063, 076, 102,
123, 139, 141, 195, 213,
379
066
049, 063, 076, 359, 360
044, 045, 050, 075, 080,
090, 235, 379, 406, 407
029, 034, 074, 182, 186,
424
090, 104, 107, 117, 134,
136, 139, 150, 153, 157,
159, 162, 165, 171, 172,
193, 197, 198, 209, 301,
307, 330, 343, 350, 416,
419, 428, 429, 433, 437
017, 029, 034, 038, 049,
063, 074, 083, 130, 150,
165, 174, 182, 186, 218,
244, 245, 246, 304, 307,
333, 334, 424
003, 020, 049, 063
172, 209
049, 063
049, 063
036, 040, 071, 079, 110,
171
085, 149, 151
033, 085, 104
018, 049, 063, 113, 131,
143, 177, 195, 379, 380
002, 012, 049, 050, 063,
065, 107, 133, 139, 163,
180, 189, 210, 247, 250,
307, 312, 324, 357, 379,
413, 416, 421
063
NOVATRONIC
.
O
OCEANIC
OCEANIC(F)
ODEON
OKANO
OMEGA
ONCEAS
ONWA
OPERA
OPTIMUS
OPTONICA
086, 094, 104, 107, 108,
109, 116, 139, 159, 172,
209, 425
150
076
049, 063, 076, 102, 421
076
050
031, 123, 225, 432
049, 063
099, 315
190
A
110 Universal Remote Control
ORBIT
ORION
ORLINE
ORMENTI-PHOENIX
ORMOND
OSAKA
OSAKI
OSIO
OSO
OSUME
OTTO VERSAND
049, 063
004, 042, 045, 049, 051,
063, 076, 094, 113, 131,
134, 139, 150, 179, 191,
195, 199, 216, 314, 331,
366, 367, 426
049, 063, 123
104
195
066
049, 063, 066, 076, 102,
106, 123, 379, 426
049, 063, 155
123
018, 102, 123, 302
012, 018, 049, 050, 053,
063, 074, 094, 104, 107,
113, 134, 139, 143, 172,
190, 244, 245, 246, 247,
250, 312, 357, 362, 379,
413, 414, 416
PAUSA
PAUZA
PERDIO
PERFEKT
PERSHIN
PHILCO
PHILHARMONIC
PHILIPS
PHOENIX
PHONOLA
.
P.T ACTRON
PAEL
PALLADIUM
PALSONIC
PANAMA
PANASONIC
PANAVISION
PATHE CINEMA
PATHE CINEMA(F)
PATHE MARCONI
111
050, 075, 379
012, 049, 063, 107, 163,
210, 247, 324, 357, 379,
413, 416, 421
049, 055, 063, 076, 379,
426
049, 063, 076, 195, 379,
413
049, 063, 099, 104, 107,
137, 139, 149, 151, 172,
397, 398, 400, 401, 405
049, 063, 210
107, 113, 121, 379, 391,
411, 416, 425
050, 168
029, 034, 074, 182, 186,
415, 424
PILOT
PIONEER
PIONIER
PLANTRON
PLAYSONIC
POLICOM
POPPY
POWERPOINT
PRANDONI-PRINCE
PRECISION
PREMIER
PRIMA
PRINCE
PRINZ
PROFEX
PROFI-TRONIC
195
195
049, 063, 102, 107, 113
049, 063
425
002, 016, 044, 049, 054,
063, 065, 090, 093, 094,
104, 107, 126, 142, 163,
168, 189, 212, 324, 369,
407, 413, 421
379
015, 022, 049, 050, 063,
065, 079, 089, 111, 112,
157, 158, 160, 175, 182,
188, 192, 215, 217, 220,
221, 247, 250, 313, 324,
337, 342, 350, 363, 374,
427
049, 050, 063, 075, 102,
104, 107, 113, 148, 324,
379, 392, 421
022, 050, 063, 065, 079,
112, 158, 160, 188, 250,
324, 379
049, 063
379
074
195
232
049, 063, 074, 172, 182,
209, 218, 227, 307, 421,
427
392, 421
049, 063, 076, 195
044, 046, 075, 090, 120,
171, 172, 307, 407, 413
379
142
076, 195, 307
044, 046, 075, 171
102, 185, 416
107, 139, 195
045, 049, 063
QUESTA
.
R
RADIALVA
RADIOLA
RADIOMARELLI
RADIONETTE
RADIO SHACK
RADIOTONE
RAMK
RANDT
RANK
RBM
PROLINE
PROSONIC
PROTECH
PROVISION
PYE
PYMI
.
Q
QUADRA VISION
QUASAR
QUELLE
A.1 Code list for television sets 111
030, 049, 102, 112, 191,
366, 436
049, 063, 085, 149, 151,
195, 225, 379, 421, 431
045, 063, 076, 139, 163,
195, 379, 413, 416
049, 063
050, 063, 065, 079, 112,
157, 158, 160, 188, 250
049, 063, 112, 195, 324
RBM (UK)
RCA
RECOR
RECTILIGNE
REDIFFUSION
REDIFFUSION (UK)
REDIFUSION
REDSTAR
REFLEX
REVOX
REX
425
045, 046, 068, 075, 099,
155, 413
003, 018, 019, 020, 049,
050, 053, 063, 074, 075,
076, 078, 080, 090, 091,
094, 113, 115, 117, 118,
131, 139, 146, 147, 150,
153, 155, 172, 195, 206,
235, 244, 245, 246, 247,
254, 301, 319, 320, 340,
341, 379, 406, 408, 413,
416
018
RFT
R-LINE
ROADSTAR
ROBOTRON
RODEX
ROTEL
ROWSONIC
ROYAL LUX
RTF
.
SABA 049, 063, 074, 107, 123
050, 063, 065, 079, 112,
158, 160, 188, 250, 342
045, 046, 047, 062, 063,
065, 104, 105, 150, 168,
324, 413
003, 020, 117, 150
049, 063
049, 063, 076, 163, 195,
421, 426, 431
341
029
147, 406
341
SACCS
SAGEM
SAISHO
SALORA
014, 017, 029, 034, 038,
046, 065, 074, 077, 107,
120, 133, 139, 172, 182,
186, 218, 304, 307, 324,
333, 334, 424, 436
121
006, 380, 435
004, 050, 076, 084, 107,
131, 132, 134, 179, 195,
233, 307, 330, 331, 379
033, 075, 107, 127, 133,
136, 139, 148, 150, 153,
171, 172, 185, 198, 209,
301, 307, 312, 416, 418,
419
147
190, 218, 436
049, 063
049, 063
018, 059, 105, 139, 171,
172, 307, 343
150, 162
104, 105
049, 063
049, 063
049, 063, 421
036, 040, 063, 071, 079,
095, 107, 110, 171, 210,
236, 242, 243, 305, 307,
323, 338, 413
076, 102, 390, 391, 392,
393, 394, 395, 421
049, 063
031, 049, 063, 076, 163,
195
056, 065, 324
049, 063
302
050
421, 426
056, 065
A
112 Universal Remote Control
SAMBERS
SAMSUNG
SANDRA
SANELA
SANSUI
SANTON
SANYO
SAVE
SBR
SCHAUB LORENZ
SCHNEIDER
SCOTT
SEARS
SEG
SEI
SEL SINUDYNE
SELECO
SENCORA
045, 046, 068, 075, 090,
120, 155, 336, 407
050, 063, 066, 076, 102,
155, 189, 195, 217, 359,
360, 365, 379, 421
379
411
049, 063, 225
195
003, 018, 020, 041, 049,
050, 056, 063, 065, 102,
107, 117, 131, 143, 189,
195, 198, 201, 206, 209,
302, 320, 325, 331, 351,
379, 391, 408, 421
049, 063
063, 112, 157, 158, 192,
313
090, 104, 136, 139, 153,
159, 162, 171, 198, 307,
416, 433
031, 040, 050, 063, 065,
069, 079, 095, 104, 107,
112, 114, 139, 148, 156,
158, 160, 168, 172, 182,
188, 195, 225, 242, 243,
250, 307, 328, 342, 379,
413, 414, 416, 423
042, 327
042
018, 045, 049, 050, 056,
063, 076, 107, 172, 195,
232, 379, 413
004, 045, 049, 051, 063,
094, 107, 139, 236, 314,
324, 357, 416
250
036, 040, 063, 071, 079,
095, 107, 110, 171, 172,
210, 236, 242, 243, 305,
307, 323, 338, 339, 369
195
SENTRA
SERINO
SHARP
SHORAI
SIAM
SIAREM
SICATEL
SIEMENS
SIERA
SIERRA
SIESTA
SILVA
SILVER
SINGER
SINUDYNE
SKANTIC
SKY
SOGERA
SOLAVOX
SONITRON
SONNECLAIR
SONOKO
SONOLOR
SONTEC
SONY
123, 139, 141, 195
380, 435
018, 094, 143, 170, 190,
206, 214, 302, 362, 364
042, 094
049, 063
045, 046, 065, 104, 107,
120, 139, 324
121
003, 018, 019, 023, 049,
053, 063, 066, 113, 118,
206, 244, 245, 246, 247,
248, 249, 302, 307
050, 063, 065, 079, 112,
158, 160, 188
049, 063, 112
421
049, 063, 379
018, 042, 049, 063, 076,
172
045, 047, 049, 063, 065,
104, 195, 324, 369, 413,
425
004, 031, 045, 051, 063,
065, 094, 104, 107, 134,
139, 150, 172, 210, 216,
236, 314, 324, 357, 366,
367, 416
307, 418
049, 063
113
066, 102, 107, 123, 139,
172, 307
209, 379, 421
049, 063
006, 050, 063, 076, 195,
379
012, 107, 139, 159, 172,
209, 357, 425
049, 063, 094, 421
012, 018, 028, 045, 131,
143, 204, 208, 211, 331,
357, 358, 370
STRATO
SUNKAI
SUNSTAR
SUNWOOD
SUPERLA
SUPERTECH
SUPRA
SUSMU
SUTRON
SWISSLINE
SYDNEY
SYTONG
.
T
.
.
TACTUS
TANDBERG
TANDY
TASHIKO
TATUNG
TEAC
SOUND & VISION
SOUND WAVE
SOUNDESIGN
SPECTRA
SSANGYONG
STANDARD
STARLIGHT
STENWAY
STERN
A.1 Code list for television sets 113
031, 045, 123
049, 113, 163
042
195
195
049, 050, 063, 113, 123,
195, 379
049, 063, 076, 107, 195
006, 031, 123
036, 040, 063, 071, 079,
095, 107, 110, 171, 236,
242, 243, 305, 307, 323,
338
049, 063, 076, 195
049, 063, 094, 123, 134,
179, 191, 232, 314, 367
049, 063, 195, 225, 431
049, 063, 195
379
049, 063, 123, 195, 379
195
218
195
413
379
425
TEC
TECH LINE
TECHICA
TECHNEMA
TECHNICS
TEDELEX
TEIRON
TEKNIKA
TELEAVIA
TELECOR
TELEFUNKEN
TELEFUSION
TELEGAZI
TELEMEISTER
TELESONIC
TELESTAR
TELETECH
TELETON
TELEVIDEON
106
065, 074, 078, 172, 182,
210, 213, 304
050, 096, 102, 123, 190,
307, 379, 413
018, 050, 107, 143, 177,
192, 201, 379, 419
049, 050, 063, 102, 106,
111, 120, 131, 200, 253,
331, 379
049, 063, 076, 195, 380,
416, 426
TELEVISO
TEMCO
TEMPEST
TENNESSEE
TENSAI
TETUNG
TEVION
TEXET
THOMSON
040, 050, 064, 168, 195,
213, 218, 242, 243, 379,
413
049, 063, 195
123
113
099, 315
379
195
042, 327
029, 034, 074, 182, 186,
415, 424
049, 063, 107, 123, 242,
379, 423
032, 049, 063, 064, 074,
082, 182, 186, 187, 218,
392, 424, 436
049, 063
049, 063, 076, 107, 123,
242
049, 063, 113
049, 063
049, 063
049, 063, 195, 213, 413
018, 067, 107, 236, 242,
379, 416
050, 075, 104, 107, 113,
148, 379
425
094
049, 063, 195
049, 063
003, 020, 050, 055, 063,
094, 113, 117, 123, 195,
225, 379, 408, 413
046
049, 063, 195
050, 195, 379
008, 010, 017, 024, 029,
034, 049, 063, 064, 074,
134, 147, 174, 182, 186,
218, 230, 234, 304, 309,
333, 334, 415, 424, 436
A
114 Universal Remote Control
THORN
THORN-FERGUSON
THRON
TMK
TOKAI
TOKYO
TOMASHI
TOSHIBA
TOWADA
TOYODA
TRAKTON
TRANS CONTINENS
TRANSONIC
TRANSTEC
TRIDENT
TRISTAR
TRIUMPH
.
U
UHER
ULTRAVOX
UMA
UNIC LINE
UNITED
049, 053, 063, 103, 106,
141, 158, 218, 222, 321,
329, 408, 409, 411, 419
032, 073, 074, 076, 080,
082, 103, 121, 158, 306,
319, 321, 322, 328, 329,
357, 358, 364, 375
117
143
049, 063, 102, 107, 195,
213, 379
141, 379
006, 031, 123
001, 018, 045, 128, 141,
143, 147, 205, 341, 369,
379, 406
045, 379, 416
195
076
044, 046, 049, 063, 075,
171, 307, 379
049, 063, 380
379
379
123, 364
004, 046, 049, 063, 128,
147, 197, 235, 339, 375
UNIVERSUM
UNIVOX
UTAX
.
VEGAVOX
VESTEL
VEXA
VICTOR
VIDEO SYSTEM
VIDEOLOGIQUE
VIDEO SYSTEM
VIDEOTECHNIC
VIDEOTON
VIDIKRON
VIDTECH
VIPER
VISIOLA
VISION
VISTAR
VOLTEC
VORTEC
VOXSON
.
W
WALTHAM
WATSON
049, 063, 069, 080, 090,
113, 147, 148, 163, 236,
242, 307, 392, 407, 414,
421
044, 045, 047, 049, 050,
063, 065, 104, 107, 133,
139, 324, 379, 413
305
049, 063, 165
049, 063
WATT RADIO
WEGA
WEGA COLOR
003, 004, 012, 018, 020,
049, 063, 074, 076, 094,
107, 131, 155, 163, 165,
172, 195, 202, 206, 210,
213, 235, 244, 245, 246,
320, 357, 375, 379, 406,
407, 408, 413, 416, 421,
428, 429, 437
049, 063, 107, 121, 213,
324, 409, 411
050
163
049, 063, 107, 125, 364,
379
063, 195
174
049, 063
031, 123, 379
049, 063
113, 379
107, 418
045
018
213
379
049, 063, 113
172, 236
074
063
049, 063, 065, 090, 163,
171, 307, 324, 407
049, 063, 163, 182, 307,
379, 418
049, 063, 107, 113, 123,
195, 244, 245, 246, 423,
431
045, 050, 068, 104, 107,
121, 139, 150, 336, 379,
416
018, 049, 063, 139, 143,
324
065, 088
A.1 Code list for television sets 115
WEGAVOX
WELTBLICK
195
063, 113
WESTINGHOUSE
WESTON
WINCO
WINDSTAR
063, 094
168
WHARFEDALE
WHITE
049, 063
045
WHITE WESTINGHOUSE 049, 050, 063, 113, 213,
379
426
006
WINTERNITZ 361
.
XRYPTON 049, 063
.
YAMISHI
YOKAN
YOKO
YORX
.
Z
.
.
ZANUSSI
ZOPPAS
006, 049, 063, 123, 379,
380
049, 063
049, 050, 063, 076, 123,
195, 379, 413, 421
123
036, 040, 063, 071, 079,
095, 110, 171, 236, 305,
307, 323, 338, 379
036, 040, 071, 079, 110,
171, 307
A
116 Universal Remote Control
A.2 Code list for DVD players
3 DLAB
.
A
AIWA
ALBA
AMSTRAD
A-TREND
.
B
BLUE SKY
BUSH
.
C
CINE ULTRA
CYBER HOME
.
D
DAEWOO
DENON
DENVER
DENZEL
DIGITOR
DIVIDO
DUAL
.
ELTA
ENZER
.
G
GE
GRUNDIG
.
H
HARMAN KARDON
HITACHI
.
J
.
.
JMB
072
075
087
085
086
080
078, 079, 082, 085
082
086
083
002, 019, 022, 034, 051
082
077
079
083
076, 077
079
077
003, 004
072, 080
001, 066
077
080
JVC
.
KENWOOD
KISS
.
L
.
.
LAWSON
LECSON
LENCO
LG (GOLDSTAR)
LIFETEC
LOGIX
.
M
MAGNAVOX
MANHATTAN
MARANTZ
MATSUI
MEDION
MICROMEDIA
MICROMEGA
MINOWA
MITSUBISHI
MONYKA
.
NAD
NEUFUNK
.
O
ONKYO
OPTIMUS
ORION
ORITRON
.
PANASONIC
PHILIPS
PHONOTREND
006
007, 034, 043, 050, 069
077
083
081
082
005, 055, 064, 070
076
083
009, 033, 056
083
033, 059, 072
076, 080
076, 083
009
072
083
023, 036
077
010, 062
077
009, 015, 048
050
080
076
024, 025, 030, 034, 035,
044, 052
009, 033, 056, 072
082
PIONEER
PROLINE
PROSCAN
PROVISION
.
R
RAITE
RCA
REC
REVOY
ROADSTAR
.
SANSUI
SCAN
SCHNEIDER
SEG
SHARP
SHINCO
SM ELECTRONIC
SONY
STANDARD
.
T
.
.
A.2 Code list for DVD players 117
010, 012, 020, 038, 041,
046, 065, 071, 074
076
003, 004, 037
082
077
003, 004, 018, 037
034, 078
082
078, 079, 082
TEAC
TECHNICS
TENSAI
TEVION
THOMSON
TOKAI
TOKIWA
TOSHIBA
TV PROJECT
.
080
083
076
077, 085
021, 028, 050
087
079
015, 029, 043, 045, 067
076
UNIVERSUM
.
W
WALKVISION
WESDER
WHARFEDALE
.
YAMAHA
YAMAKAWA
.
Z
.
.
ZENITH
087
034
076, 079
076
003, 004, 073
077
083
009, 010, 033, 057, 058
008
085
087
082
081
016, 017, 030, 034, 063
077, 084
005, 009, 033, 055, 064,
083
A
118 Universal Remote Control
A.3 Code list for audio-video receivers
.
.
A
ADCOM
AIWA
082, 092, 225, 161, 023,
148, 149
170, 018, 104, 202, 203,
213, 211, 188
189 AKAI
ANTHEM
ARCAM
127, 128
141, 255
ATLANTIC_TECHNOLOGY 134
AUDIO_FILE 071
.
B
B&K
BOSE
096, 097
070, 170, 224, 147, 227,
199
246 BOSTON_ACOUSTICS
.
C
CARVER 006, 028, 061, 071, 201,
214, 226, 185, 022, 077,
050
026 CLARION
.
D
DELPHI
DENON
251
109, 215, 230, 234, 002,
121, 133
.
057, 090
229
HARMAN_KARDON
HITACHI
.
I
.
.
INTEGRA
.
JVC
.
KENWOOD
KLH
KRELL
.
L
.
.
LEXICON
LINN
LUXMAN
.
M
MAGNAVOX
MARANTZ
MCINTOSH
MERIDIAN
MITSUBISHI
MONDIAL
ELAN
ESCIENT
.
F
.
.
FISHER
FLEXTRONICS
FOSGATE_AUDIONICS
.
G
GOLDSTAR
047, 214, 182
207
231, 134
008
MYRYAD
.
NAD
NAKAMICHI
NIRO
NILES
231, 233, 153, 154, 118,
119
020
029
163, 191, 114, 034, 091
026, 066, 145, 192, 182,
005, 037, 196, 252
123
150, 072, 197, 222
120, 235, 236, 237, 159,
160
124, 206
137, 139, 052, 165, 115,
004, 009
086, 164, 152, 208
006, 028, 031, 040, 063,
185, 186, 015, 056
238, 053
100, 012, 013
242, 243, 204
157, 158, 042, 043, 081,
112
030, 099
186, 113, 038, 216, 210
111, 244, 245, 172, 183,
054
135
241
.
O
ONKYO
OPTIMUS
OUTLAW
.
PANASONIC
PARASOUND
PHILIPS
PIONEER
POLKAUDIO
PROCEED
.
R
RCA
REALISTIC
ROTEL
RUSSOUND
.
A.3 Code list for audio-video receivers 119
029, 017, 046, 108, 080,
209
026, 041
134
SAMSUNG
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SONY 032, 195, 219, 177, 098,
221
129, 130, 132, 003, 103,
105, 125, 126
249, 250, 063
014, 039, 044, 069, 168,
116, 035, 078
251
144, 021
SOUNDESIGN
SUNFIRE
.
T
.
.
TEAC
TECHNICS
010, 048, 117, 156, 067,
055
019, 073, 075
074, 083, 085
223, 239
THETA_DIGITAL
TOSHIBA
.
YAMAHA
016
040, 048, 110, 065, 228,
063
047, 059
019
026, 094, 131, 175
024, 102, 106, 246
018, 247, 248, 166, 101,
184, 218, 025, 179, 180,
220
036
142, 143, 146
005, 019, 049, 111, 212,
217
122, 193, 219, 178, 177,
200, 254, 007
136
060, 087, 033
026, 253, 169, 067, 173,
205, 011, 232, 089, 027,
051, 181
120 INDEX
Index
1st Audio Language ,
1st Subtitle Language ,
2nd Audio Language ,
2nd Subtitle Language ,
4:3 ,
16:9 ,
22 kHz ,
A
A/V Output ,
Access Control ,
Active ,
Add to Fav ,
Advanced ,
After next program ,
After this program ,
ALL ,
Alphabetic ,
Animation ,
Astra ,
AUDIO L ,
AUDIO L/R ,
AUDIO R ,
Auto ,
Auto Recording ,
,
Automatic Power Down ,
avi,
B
Battle Tank,
Battle Tank (Network) ,
Battle Tank (Single) ,
Brightness in Operation Mode ,
Brightness in Standby Mode ,
Button,
Buttons,
C
C band,
CAM,
CAS Only ,
CAS only ,
CAS–FTA ,
,
Censorship ,
Center ,
Center extract ,
Change PIN Code ,
CI,
COAXIAL ,
Common Interface,
Component ,
Conditional Access Module,
Connection Type ,
,
Cut ,
D
Date ,
Daylight Saving Time ,
Default ,
Delete ,
,
Descramble Mode ,
,
DHCP ,
DiSEqC,
DiSEqC 1.0
,
DiSEqC 1.1
,
DiSEqC Command Mode ,
Display Format ,
DivX,
Dolby Digital ,
Duration ,
,
DVB,
DVB-S2 8PSK ,
DVB-S2 QPSK ,
,
,
E
Edit Favorite List ,
Edit Service List ,
Electronic Programme Guide,
ENERGY ,
EPG,
EPG Gathering Time ,
eSATA ,
,
Every Day ,
Every Weekday ,
Every Weekend ,
Export System Data ,
F
Factory Setting ,
Fav–NoFav ,
FEC ,
,
File Management ,
INDEX 121
File Name ,
Font Color ,
Font Size ,
Format Hard Disk ,
Frequency ,
Front Display ,
FTA + CAS ,
FTA only ,
FTA/Scrambled ,
FTA–CAS ,
,
FTP Server ,
Full ,
Full Scroll ,
G
Gateway ,
GMT,
GMT Collection ,
Goto ,
Goto the position ,
H
Hard of Hearing ,
HD Output ,
HDMI ,
,
,
high definition,
Home Transponder ,
I
.idx,
Import System Data ,
Info Box Display Time ,
Info Box Position ,
information box,
Instant Recording Duration ,
IP Address ,
IP Setting ,
122 INDEX
J jpg,
Jump Time Interval ,
Jump time Interval ,
K
K u band,
keyboard,
L
LAN ,
Language ,
Letter Box ,
LNB,
LNB 1 IN ,
,
LNB 1 OUT ,
LNB 2 IN ,
,
LNB 2 OUT ,
LNB Frequency ,
LNB Power ,
LNB Setting ,
Local Time ,
Lock ,
,
,
Locked ,
Loop Through ,
M
Main Display Scrolling ,
Manual ,
Media Player ,
Media Subtitle ,
MediaHighway,
MediaHighway EPG ,
Menu Language ,
Mini A ,
Miscellaneous ,
mkv,
Mode ,
,
Modulation ,
,
,
mono,
Motor Control ,
Motorized DiSEqC 1.2
,
Motorized DiSEqC 1.3
,
MOVE ,
Move ,
Movement ,
MP3,
MP3 Player ,
mp4,
multifeed,
multiplex,
My Latitude ,
My Longitude ,
N
Network Firmware Upgrade ,
Network Search ,
NEW ,
No block ,
Normal ,
,
normal-screen television,
O
ON/OFF ,
Once ,
One Time ,
on-screen display,
OPTICAL ,
OSD,
OSD Transparency ,
OTA Firmware Upgrade ,
Other ,
P packet identification,
Parental Control ,
Part Scroll ,
Passive ,
Password ,
,
PID ,
Pilot ,
,
,
PIN,
Playback ,
Polarization ,
,
port forwarding,
POWER ,
Primary DNS ,
progress bar,
Provider ,
,
R radio services list,
Record ,
Recorded Program ,
,
recorded programme list,
Recording ,
Recording Drive ,
Recover System Data ,
Rename ,
,
,
Reservation ,
Reset Service List ,
S
S/PDIF ,
S/PDIF COAXIAL ,
S/PDIF OPTICAL ,
SAT Name Edit ,
SAT/TP Edit ,
Satellite ,
,
,
,
,
Satellite Angle ,
satellite list,
Satellite Name ,
,
INDEX 123
Save ,
SCART ,
SCART Output ,
Search Mode ,
Searching ,
Secondary DNS ,
Separated ,
Service ,
Services Copy ,
services list,
Show Provider ,
Size ,
SMATV,
,
.smi,
Sort ,
Sorting ,
,
Sound Mode ,
.srt,
Standby Mode ,
Start ,
Start firmware upgrade ,
Start Search ,
Start Time ,
Starting Position ,
stereo,
Store ,
Store System Data ,
.sub,
Sub Display Content ,
Subnet Mask ,
subtitle,
Symbol Rate ,
Sync ,
T teletext,
television services list,
Text Scroll ,
124 INDEX
Time ,
Time Offset ,
Time Padding of Timer Recording ,
Time Shift Storage ,
Time Shifting ,
,
,
timer list,
Timer Recording Duration ,
Total block ,
Transponder ,
transponder,
Trick Mode Level ,
Tuner ,
Tuner 1 ,
Tuner 1 to Tuner 2 ,
Tuner 2 ,
Tuner 2 to Tuner 1 ,
Tuner Select ,
TV ,
TV Aspect Ratio ,
Type ,
U
Unlimited ,
USALS,
USALS Setting ,
USB ,
USB Firmware Upgrade ,
User ,
User ID ,
User Info ,
,
User Select ,
V
VCR ,
VCR SCART Type ,
Vega ,
VIDEO ,
,
Video Format ,
vob,
W
Web Server ,
Weekly ,
wide-screen television,
X
XviD,
Y
Y/Pb/Pr ,
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
DivX is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit http:
//www.divx.com
for more information and software tools to convert your files into DivX video.
About DivX Video-On-Demand: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to http://vod.divx.com
with this code to complete the registration process and learn more about DivX
VOD.
Correct disposal of this product
This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can dispose this product for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
At any time during the life of a product Topfield Co., Ltd. may change or modify the hardware or software on any product to introduce new features or improve the functionality of the product.
Copyright © 2010, Topfield Co., Ltd. All rights reserved.
http://www.i-topfield.com
English version
110T-I3A95-701-0
Public link updated
The public link to your chat has been updated.
Advertisement
