Araknis Networks AN-ACC-INJ-POE-30W Gigabit PoE+ Injector Quick Start Guide

The Araknis Networks AN-ACC-INJ-POE-30W Gigabit PoE+ Injector provides power and data over a single Ethernet cable to compliant devices. It detects and delivers the required voltage and power, supporting 10/100/1000 Mbps speeds. With 30W of power output, it's ideal for powering IP cameras, VoIP phones, and wireless access points.

PDF

Document

Quick Start Guide

AN-ACC-INJ-POE-30W

Gigabit PoE+ Injector

Features and Specifications

• Built-in mounting tabs with included screws and anchors.

• 802.3af/at compliant; automatically detects and provides the required voltage and power for compliant devices.

• Gigabit Ethernet ports support full duplex 10/100/1000Mbps

• Power Input: 100-240V AC, 50-60Hz, 0.8A

• PoE Output: 54V 0.6A DC, 30W max

• Operating Temperature: -4 to 104° F (-20 to 40° C)

Installation

Mount injector and connect Ethernet cables, then connect power.

PWR LED = solid green when powered on.

1. PoE device output

2. LAN cable input

3. AC power inlet

4. Mounting screws and anchors

5. PWR LED

1 2 3 4 5

FCC Warning

This device has been tested and found to comply with limits for a Class A digital device, pursuant to Part 15 of FCC Rules.

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates and radiates radio frequency energy and, if not installed and used in accordance with the user’s manual, it may cause interference in which case users will be required to correct interference at their own expenses.

CE Warning

This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

Warranty

Araknis Networks® products have a 2-Year Limited Warranty.

This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

Technical Support

Phone: 866.838.5052

Email: [email protected]

Hello! I am an AI chatbot specifically trained to assist you with the Araknis Networks AN-ACC-INJ-POE-30W Quick start Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant is out of keyboard. Please, try again later.

Quick Start Guide

FCC Warning

CE Warning

Warranty

Technical Support

Related

OvrC AN-510-AP-IW-AC Araknis Networks® 510-Series Wave 2 AC 1300 Indoor Wall Mount Wireless Access Point Quick Start Guide

Araknis WAVE 2 AC Wireless Access Point | AI Chat & PDF

OvrC AN-210-SW-C-8-POE Araknis Networks™ 210 Series Websmart Gigabit Switch Quick Start Guide

OvrC AN-810-AP-I-AC Araknis Networks® 810-series Indoor Wireless Access Point Quick Start Guide

Araknis 310 Series Network Switch Guide | AI Chat & PDF

Araknis Networks AN-110-SW-C-5P Araknis Networks® 110 Series Unmanaged+ Gigabit Compact Switch Quick Start Guide

Araknis Networks AN-500-AP-I-AC 500 Series Indoor Wireless Access Point Quick Start Guide

Araknis AN-500-AP-I-AC Product Manual

Araknis Networks AN-300-SW-F-24 300 Series Managed Gigabit Switch Quick Start Guide

Araknis Networks AN-300-SW-R-16 300 Series Managed Gigabit Switch Quick Start Guide

Araknis 100-Series Network Switches Manual | AI Chat

Araknis Networks AN-100-SW-F-16 100 Series Unmanaged Gigabit Switch Installation manual