advertisement
82-K5234-1EN, Rev. 001 www.kyocera-wireless.com
User’s Guide for QCP
™
2035 phone
This manual is based on the production version of the QCP 2035 phone.
Software changes may have occurred after this printing. Kyocera reserves the right to make changes in technical and product specifications without prior notice. The products and equipment described in this documentation are manufactured under license from QUALCOMM Incorporated under one or more of the following U.S. patents:
4,901,307 5,056,109 5,099,204 5,101,501 5,103,459 5,107,225
5,109,390 5,193,094 5,228,054 5,257,283 5,265,119 5,267,261
5,267,262 5,280,472 5,283,536 5,289,527 5,307,405 5,309,474
5,337,338 5,339,046 5,341,456 5,383,219 5,392,287 5,396,516
D356,560 5,408,697 5,414,728 5,414,796
5,416,797 5,426,392 5,437,055 D361,065 5,442,322 5,442,627
5,452,473 5,461,639 5,469,115 5,469,471 5,471,497 5,475,870
5,479,475 5,483,696 5,485,486 5,487,175 5,490,165 5,497,395
5,499,280 5,504,773 5,506,865 5,509,015 5,509,035 5,511,067
5,511,073 5,513,176 5,515,177 5,517,323 5,519,761 5,528,593
5,530,928 5,533,011 5,535,239 5,539,531 5,544,196 5,544,223
5,546,459 5,548,812 5,559,881 5,559,865 5,561,618 5,564,083
5,566,000 5,566,206 5,566,357 5,568,483 5,574,773 5,574,987
D375,740 5,576,662 5,577,022 5,577,265 D375,937 5,588,043
D376,804 5,589,756 5,590,069 5,590,406 5,590,408 5,592,548
5,594,718 5,596,570 5,600,754 5,602,834 5,602,833 5,603,096
5,604,459 5,604,730 5,608,722 5,614,806 5,617,060 5,621,752
5,621,784 5,621,853 5,625,876 5,627,857 5,629,955 5,629,975
5,638,412 5,640,414 5,642,398 5,644,591 5,644,596 5,646,991
5,652,814 5,654,979 5,655,220 5,657,420 5,659,569 5,663,807
5,666,122 5,673,259 5,675,581 5,675,644 5,680,395 5,687,229
D386,186 5,689,557 5,691,974 5,692,006 5,696,468 5,697,055
5,703,902 5,704,001 5,708,448 5,710,521 5,710,758 5,710,768
5,710,784 5,715,236 5,715,526 5,722,044 5,722,053 5,722,061
5,722,063 5,724,385 5,727,123 5,729,540 5,732,134 5,732,341
5,734,716 5,737,687 5,737,708 5,742,734 D393,856 5,748,104
5,751,725 5,751,761 5,751,901 5,754,533 5,754,542 5,754,733
5,757,767 5,757,858 5,758,266 5,761,204 5,764,687 5,774,496
5,777,990 5,778,024 5,778,338 5,781,543 5,781,856 5,781,867
5,784,406 5,784,532 5,790,589 5,790,632 5,793,338 D397,110
5,799,005 5,799,254 5,802,105 5,805,648 5,805,843 5,812,036
5,812,094 5,812,097 5,812,538 5,812,607 5,812,651 5,812,938
5,818,871 5,822,318 5,825,253 5,828,348 5,828,661 5,835,065
5,835,847 5,839,052 5,841,806 5,842,124 5,844,784 5,844,885
5,844,899 5,844,985 5,848,063 5,848,099 5,850,612 5,852,421
5,854,565 5,854,786 5,857,147 5,859,612 5,859,838 5,859,840
5,861,844 5,862,471 5,862,474 5,864,760 5,864,763 5,867,527
5,867,763 5,870,427 5,870,431 5,870,674 5,872,481 5,872,774
5,872,775 5,872,823 5,877,942 5,878,036 5,870,631 5,881,053
5,881,368 5,884,157 5,884,193 5,884,196 5,892,178 5,892,758
5,892,774 5,892,816 5,892,916 5,893,035 D407,701 5,898,920
5,903,554 5,903,862 D409,561 5,907,167 5,909,434 5,910,752
5,911,128 5,912,882 D410,893 5,914,950 5,915,235 5,917,708
5,917,811 5,917,812 5,917,837 5,920,284 D411,823 5,923,650
5,923,705 5,926,143 5,926,470 5,926,500 5,926,786 5,930,230
5,930,692
Other patents pending.
T9 is patented under the following U.S. patents:
5,818,437, 5,953,541, 5,187,480, 5,945,928, 6,011,554 and additional patents are pending worldwide.
Kyocera is a registered trademark of Kyocera Corporation. QCP is a trademark of Kyocera Wireless Corp. QUALCOMM is a registered trademark of
QUALCOMM Incorporated. T9 is a registered trademark of Tegic
Communications, Inc. Other product and brand names may be trademarks or registered trademarks of their respective owners.
Copyright © 2002 KYOCERA Wireless Corp. All rights reserved. Printed in the
United States of America.
82-K5234-1EN, Rev. 001
FCC/IC Notice
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
To comply with FCC radiation exposure requirements, use of this device for body-worn operational configurations is limited to accessories tested and approved by Kyocera Wireless Corp. Other accessories used with this device for body-worn operations must not contain any metallic components and must provide at least 22.75mm separation distance including the antenna and the user’s body.
This model phone meets the government’s requirements for exposure to radio waves.
Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The
guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health.
The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR are conducted using standard operating positions specified by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when
tested for use at the ear is 1.53 and when worn on the body, as described in this user guide, is 0.74. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). SAR value shown is worst case value for a QCP 2035. A typical SAR value for QCP
2035 when tested for use at the ear is 1.13 W/kg and when worn on the body, as described in this user guide, is 0.505 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirement). The highest SAR value when tested for use at the ear is 1.5 W/kg and when worn on the body, as described in this user guide, is 1.48 W/kg. This is the worst case value. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The
FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section http://www.fcc.gov/oet/ fccid after searching on FCC ID OVFQCP 2035. Additional information on SAR can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http:/ / www.wow-com.com
.
* In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
Caution
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the warranty and user’s authority to operate the equipment.
Warning
Use only Kyocera approved accessories with Kyocera phones. Use of any unauthorized accessories may be dangerous and will invalidate the phone warranty if said accessories cause damage or a defect to the phone.
Use the following guidelines to optimize the performance and life of your phone, antenna, and battery.
ACN 093 453 037
Road safety comes first
While driving a car, driving is your first responsibility. A wireless phone can be an invaluable tool, but good judgment must be exercised at all times. Check the local laws and regulations on the use of wireless phones in vehicles.
Always obey them, and exercise caution while driving.
Air bags
If you have an air bag, DO NOT place installed or portable phone equipment or other objects over the air bag or in the air bag deployment area. If equipment is not properly installed, you and your passengers risk serious injury.
Potentially unsafe areas
Posted facilities— Turn your phone off in any facility when posted notices require you to do so.
Aircraft— FCC regulations prohibit using your phone on a plane that is in the air. Turn your phone off before boarding aircraft.
Vehicles— RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer of the device to determine if it is adequately shielded from external RF energy. Your physician may be able to help you obtain this information.
Blasting areas— Turn off your phone where blasting is in progress. Observe restrictions, and follow any regulations or rules.
Potentially explosive atmospheres— Turn off your phone when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks in such areas could cause an explosion or fire, resulting in bodily injury or death.
Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel or chemicals
• vehicles using liquefied petroleum gas, such as propane or butane
• areas where the air contains chemicals or particles such as grain, dust, or metal powders
• any other area where you would normally be advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Don’t bend the antenna or touch it unnecessarily. Pull out the antenna when on a call and push it in when the phone is not in use. Avoid dropping, hitting, bending, or sitting on the phone.
Keep phone dry
If the phone gets wet, turn the power off immediately and return it to the dealer for service.
Resetting the phone
If the screen seems frozen and the keypad does not respond to keypresses, return it to the dealer for service.
Qualified service
Changes or modifications not expressly approved by the party responsible for compliance could void the warranty and the user’s authority to operate the equipment.
Accessories
Use only Kyocera-approved accessories with Kyocera phones. Use of any unauthorized accessories may be dangerous and will invalidate the phone warranty if said accessories cause damage or a defect to the phone.
To shop online for a Hands-free Car Kit and other phone accessories, visit www.kyocera-wireless.com/store . To order by phone, call (800) 211-1537
(U.S.A. only) or (510) 683-4004.
Radio frequency (RF) energy
Your telephone is a radio transmitter and receiver. When it is on, it receives and sends out RF energy. Your service provider’s network controls the power of the RF signal. This power level can range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal Communications Commission (FCC) adopted
RF exposure guidelines with safety levels for hand-held wireless phones.
These guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies in the following reports:
• ANSI C95.1 (American National Standards Institute, 1992)
• NCRP Report 86 (National Council on Radiation Protection and
Measurements, 1986)
• ICNIRP (International Commission on Non-Ionizing Radiation Protection,
1996)
Your phone complies with the standards set by these reports and the FCC guidelines.
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA 92121 U.S.A.
Visit us at www.kyocera-wireless.com
To purchase accessories, visit www.kyocera-wireless.com/store
Table of Contents
1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Screen icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Using menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Basic functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
2 Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
3 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Working with contact cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Speed dialing and 1-Touch Dialing . . . . . . . . . . . . . . . . . . . . . . . . 24
Working with the Recent Calls list . . . . . . . . . . . . . . . . . . . . . . . . . 26
Entering letters, numbers, and symbols . . . . . . . . . . . . . . . . . . . . . 28
4 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
User Guide for the QCP 2035 Phone xv
Silence All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Call Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
5 Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 xvi
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Brick Attack™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
6 Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Retrieving messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Sending messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Message delivery options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Erasing messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Troubleshooting messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
7 Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Using the Web Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Indicators and alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
8 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
User Guide for the QCP 2035 Phone xvii
1 GETTING STARTED
Installing the battery
1.
Hold the phone face down in your palm with the antenna pointing down. Place your thumb on the ridges of the battery door. Push down with your thumb and slide the door away from you until it stops (about 1/2 inch or 1.27 centimeters).
2.
Move your thumb to the side of the phone, then slide the door off the phone.
3.
Place the battery with the metal contacts facing down and towards the bottom of the phone.
User Guide for the QCP 2035 Phone 1
4.
Lay the keypad flat inside the faceplate.Align the slots in the phone to the posts on the faceplate, and close until they are latched together.
5.
Place the phone face down on a flat surface.
Align the battery door to the grooves on the side of the phone. Slide the battery door on while pressing down firmly, ensuring that the battery door clicks into place. Check and repeat if the battery door is not aligned. Do not force.
Note— Before using your phone, fully charge the battery (see page 14).
2 Getting Started
1
2
Menu
8
6
7
3
4
5
9
10
11
12
13
User Guide for the QCP 2035 Phone
1
2
3
4
5
6
7
Jack for Hands-free headset (sold separately) only.
Home screen. Press select Menu .
(item 9) to
Clear key erases the last character in text entry, or returns to the previous menu.
Navigator key adjusts volume when in a call; scrolls up, down, left, or right through lists and menus; and positions the cursor during text entry.
Send/Talk key starts or answers a call.
Use the keypad to enter numbers, letters, or symbols.
Shift key changes case in text entry.
3
4
1
2
6
7
3
4
5
Menu
8
9
10
11
12
13
8
9
10
11
12
13
Extend the antenna to make or answer a call. Push in the antenna when the phone is not in use.
Select key selects a menu item or option.
End/Power key turns on and turns off the phone, ends a call, or returns to the home screen.
Space key enters a space during text entry.
0 key cycles through word choices during T9
®
text entry (available in
English only).
Jacks for AC Adapter (included) and data cable (sold separately) only.
Warning: Inserting an accessory into the incorrect jack may damage the phone.
Getting Started
Screen icons
The following icons may appear on your phone screen:
The phone is operating in CDMA digital mode. If does not appear, the phone is operating in analog mode (2135 only).
The phone is receiving a signal. You can make and receive calls.
The phone is not receiving a signal. You cannot make or receive calls.
A call is in progress.
The alarm clock is set.
The phone ringer is silenced. The phone vibrates or lights up instead of ringing.
The phone is roaming outside of its home service area.
User Guide for the QCP 2035 Phone 5
You have a text message, voicemail, or page. ( indicates an urgent text message, voicemail, or page.)
The battery is fully charged. The more black bars you see, the greater the charge.
Enhanced CDMA voice privacy is on, if available from your service provider, or you are in a secure web browser session.
6
®
Press .
Press to select an item.
Enter text using rapid text entry (available in English only).
Enter text using normal alpha text entry.
Getting Started
Capitalize the next letter when entering text.
Capitalize every letter when entering text.
Capitalize the first letter of each word when entering text, or the first letter of each sentence in a text message.
Enter symbols.
Enter numbers.
Menus
To view any of these menus from the home screen, press
Menu . Press
to select
left or right to see different menus. From any menu, press to select a menu option.
User Guide for the QCP 2035 Phone 7
8
Contacts
View All
Add New
Find Name
Speed Dial
List
Business
List
Personal
List
Information
Messages
Voice
Send New
Send
Preformat
Text InBox
Net Alerts
Filed
Erase Msgs
Msg Settings
Settings
Silence All
Keyguard
Sounds
Display
Security
Call Information
Network
Extras
Messaging
Accessories
Tools & Games
Alarm Clock
Tip Calculator
Calculator
Countdown
Stopwatch
Brick Attack
TM
Recent Calls
Phone Info
Phone Number
Roaming/
Service Status
(appears only if roaming)
Web Browser
Getting Started
Using menus
• From the home screen, press to select Menu , then press right to see menus.
• Press to select a menu or menu item.
left or
• Once you have selected a menu, press the menu items.
• Press up or down to scroll through to return to the top level of the current menu.
• Press to return to the home screen.
In this guide, → tells you to select an option from a menu. For example,
Menu → Settings means select Menu , then the Settings menu.
User Guide for the QCP 2035 Phone 9
Basic functions
This document describes the QCP 2035 trimode phone by Kyocera, with
CDMA digital service at 800 MHz and 1900 MHz, and analog service at
800 MHz.
To turn on the phone
• Press .
¤
and the home screen appear when the phone is turned on and is ready to make or receive a call.
To turn off the phone
• Hold down until “Powering off” appears (about three seconds).
To find your phone number
• From the home screen, select Menu → Phone Info.
Your phone number appears.
10 Getting Started
To make a call
1.
Extend the antenna.
2.
Enter the phone number.
3.
Press .
To end a call
• Press .
To answer a call
• Press .
To silence the ringer or alert
• To silence the ringer or stop the vibration alert during an incoming call, press . Press to answer the call. (To silence all sounds, see
“Silence All” on page 36).
User Guide for the QCP 2035 Phone 11
To mute and unmute during a call
• To turn Mute on, press .
• To turn Mute off, press to select UnMute.
To adjust the volume
• To manually adjust the earpiece volume during a call, press down.
up or
• To automatically adjust the earpiece volume based on the amount of noise around you or the other person’s voice volume level, follow these steps: a.
Place a call from a quiet environment.
b.
Press up or down to set the volume to a comfortable level.
c.
Select Menu
→
Settings
→
Sounds
→
Smart Sound.
12 Getting Started
d.
Select an option.
– Enabled adjusts the volume automatically. The volume you have just set is used as a baseline. You can adjust the volume manually during a call.
– Disabled keeps the volume level the same unless you adjust it using . e.
Press to save the setting.
To lock the keypad
• To protect your phone from accidental keypresses when you are not in a call, press up and hold .
To unlock the keypad
• Press → → in this order.
User Guide for the QCP 2035 Phone 13
2 BATTERY
Your phone comes with an internal/removable lithium ion (LiIon) battery.
The battery is partially charged when you receive the phone. Before using your phone, fully charge the battery. Connect the AC Adapter to the proper jack on the bottom of the phone as shown below, then connect the adapter’s plug to a wall outlet.
Note— You must have at least a partial charge in the battery to make or receive calls, regardless of whether or not the AC Adapter is connected to the phone. The battery icon is animated as the battery is charging. The battery is fully charged when the battery icon looks like . You can safely recharge the battery at any time, even if it has a partial charge.
14 Battery
Power-save mode
Your phone switches to power-save mode after several unsuccessful attempts to locate a signal. When the phone is in power-save mode, you cannot make or receive calls, and “Power Save Mode” and appear on the screen. Press any key to exit.
Battery guidelines
• Do not disassemble, puncture, or short-circuit the battery.
• If you have not used the battery for more than a month, recharge it before using your phone.
• Avoid extreme temperatures, direct sunlight, and high humidity.
• Never dispose of any battery in or near a fire. It could explode.
Important
If the battery is expired or not installed in the phone, you may not be able to make an analog call. If you experience this condition, charge the battery to make an analog call.
User Guide for the QCP 2035 Phone 15
Tips for improving battery performance
Before using your phone, fully charge the battery.
• The following functions may drain the battery more quickly:
• Backlighting is frequently on. (To adjust backlighting, select Menu
→
Settings → Display → Backlighting , then select an option such as 10 seconds or 30 seconds.)
• The phone is frequently used in analog mode. If is not visible on your home screen, you are in analog mode. (To set your phone to operate in different modes, see “To select digital or analog mode” on page 44).
• You are far away from a base station or cell site when in digital mode.
• Data cables or accessories are connected to the phone.
• Service is not available or is available intermittently. The phone requires more power to acquire service than to maintain service.
• The earpiece and ringer volume settings are high. To adjust the earpiece volume, see “To adjust the volume” on page 12. To adjust the ringer
16 Battery
volume, select Menu → Settings → Sounds → Ringer Volume , and press left to lower the volume.
• Check how often voicemail notifications, pages, and text messages are received, and how quickly they are acknowledged. To use power most efficiently, acknowledge notifications and messages immediately.
User Guide for the QCP 2035 Phone 17
3 CONTACTS
Use your phone’s Contacts directory like a set of phone index cards to store information about a person or company.Before using the Contacts directory, see “Entering letters, numbers, and symbols” on page 28.
Working with contact cards
To save a phone number
1.
From the home screen, enter the phone number you want to save.
2.
Press to Save New .
Note— To add to an existing contact, select Add to...
after you enter the number. Select the contact you want to add to, then proceed to step 4.
3.
Enter a name for the contact. If you need to know how to use the keypad to enter letters, see page 28.
18 Contacts
4.
Press
-or-
to Save .
• Press right, then press to select Options . Press down to select an option from the list:
up or
– Save— Save information and return to the home screen.
– Number Type— Select work, home, mobile, pager, or fax.
– Speed Dialing— Select a speed dialing location from the list.
– Secret— Select Yes to lock the phone number. If a phone number is locked, you must enter your four-digit lock code to view or edit the number. Select No to leave the number unchanged.
– Primary Number— Classify this number as the primary number for the contact.
– Classify Contact— Classify the contact as business or personal .
User Guide for the QCP 2035 Phone 19
5.
If finished, press
Successfully Saved!”
to select Save . A message appears: “Contact
-or-
If you want to continue entering information, select another option.
You can also save a phone number through the Contacts directory as follows:
1.
From the home screen, select Menu
→
Contacts
→
Add New .
2.
Select Phone Number .
3.
Enter the phone number up to as many digits as will fit on the screen.
4.
Select Next .
5.
Proceed to step 3 in “To save a phone number” on page 18.
20 Contacts
To edit a contact card
1.
From the home screen, select Menu → Contacts .
2.
Find the contact you want to edit by selecting either View All or Find
Name .
3.
Press to select the contact card you want to edit.
4.
Select Options to edit the entire contact card, or select the specific information (such as the phone number) you want to edit.
5.
Enter the new information.
6.
If finished, press to select Save .
To erase information from a contact card
1.
From the home screen, select Menu → Contacts → View All .
2.
Press to select a card.
3.
Select Options to edit the entire contact card, or select the specific information (such as the phone number) you want to edit.
User Guide for the QCP 2035 Phone 21
4.
To erase the entire contact card, select Erase Contact . To erase specific information, select Erase .
5.
If finished, press to select Exit .
To search the Contacts directory
The Contacts directory lists entries alphabetically. You can search through a list of all contacts, speed dialing entries, or cards of a specific type, or you can enter the name you are searching for.
1.
From the home screen, select Menu
→
Contacts .
2.
Press down to select a search method:
• To search a list of names, select View All , Speed Dialing List ,
Business List , or Personal List .
-or-
• To search for a specific name, select Find Name and enter all or part of the name. A list of matching names appears.
22 Contacts
3.
Press down until you find the name you want.
• To call the contact, select the number and press
• To display the full contact card, press .
To call from the Contacts directory
1.
From the home screen:
Select Menu
→
Contacts
→
View All .
-or-
Press down.
2.
Select a name from the list.
3.
Select the number and press .
.
User Guide for the QCP 2035 Phone 23
Speed dialing and 1-Touch Dialing
Speed dialing and 1-Touch Dialing allow you to quickly dial a stored phone number by entering the memory location and pressing .
To set a speed dialing location
1.
Open a saved contact card.
2.
Select the phone number to assign a speed dialing location.
3.
Select Speed Dialing .
4.
Select a speed dialing location. (Note—Speed dialing location “1” is reserved for your voicemail number).
5.
Press to Assign .
To remove a speed dialing location
1.
From the home screen, select Menu
→
Contacts
→
Speed Dialing List .
2.
Press to select the speed dialing location.
24 Contacts
3.
Press to select the number to remove.
4.
Select Speed Dialing .
5.
Choose a speed dialing location and press right to select Remove .
6.
Press .
To speed dial
• From the home screen, enter the one- or two-digit speed dialing number and press .
To call your voicemail number
• From the home screen after receiving a notification, press and hold your voicemail speed dialing number. ( is the default.)
User Guide for the QCP 2035 Phone 25
To enable 1-Touch Dialing
1.
Select Menu → Settings → Extras → 1-Touch Dialing → Enabled .
2.
Press .
To use 1-Touch Dialing
• Enter the one- or two-digit speed dialing number and hold down the last number. For example, if the speed dialing number is 15, press press and hold .
, then
To redial the last number called
• Press tw ice.
Working with the Recent Calls list
The Recent Calls list shows the last 15 calls. Calls are identified by type.
(Some types may not be available on all phones. Check with your service provider.)
26 Contacts
Call to
Call from
3-way call
Forwarded call
Call waiting
Missed call
To view the Recent Calls list
1.
From the home screen, select Menu → Recent Calls .
2.
To view details about a call, select a call entry.
3.
Select an option ( Save New , Add to , Time , or Number ).
4.
Press .
Note— If the number has been saved as “secret,” you will need to enter your four-digit lock code to view or edit the number. For more information about secret phone numbers, see page 18.
User Guide for the QCP 2035 Phone 27
To dial from the Recent Calls list
1.
From the home screen, select Menu → Recent Calls .
2.
Select the call entry in the list, and press to display the call detail.
3.
Press to call the number.
Entering letters, numbers, and symbols
You can enter letters, numbers, and symbols in a contact card or text message. The default text entry mode is .
• To enter spaces, press
• To move the cursor, press
.
right or left.
• To erase single characters, press .
• To erase all characters, press and hold .
28 Contacts
• To capitalize the next letter, press
• To capitalize every letter, press
( appears).
twice ( appears).
• To capitalize the first letter of each word, press appears).
three times (
• Note— If you are sending a new or preformatted text message (see page 65), indicates that the first letter of each sentence is capitalized.
• To return to text entry mode, press .
To change text entry modes
1.
From the text entry screen, press bottom of the screen.
to highlight the options at the
2.
Press right to highlight the current text entry mode, and press to select it.
User Guide for the QCP 2035 Phone 29
3.
A list of text entry modes appears. Press list.
4.
Press
Shortcuts
to select a text entry mode.
• To change text entry modes, press and hold
down to scroll through the
.
• To change capitalization modes, press once.
To use text entry modes
To enter letters in mode:
1.
Press the key once for the first letter, twice for the second letter, and so on.
2.
After the cursor moves right, enter the next letter.
30 Contacts
To enter words in rapid text entry mode (available in English only):
®
1.
Press each letter key once. For example, to enter the word “how,” press
→ .
2.
Press to cycle through words.
3.
Press right when you see the word you want.
To enter symbols in mode:
1.
Press down through the list of symbols.
2.
Press the number key corresponding to the symbol you want.
3.
To exit the list without entering a symbol, press .
To enter numbers in mode:
• Press a key once to enter the number on the key.
User Guide for the QCP 2035 Phone 31
To enter numbers in mode:
• Press a key several times to cycle through the letters and show the number on the key. For example, to enter a 2, press four times.
To change language and enter special characters
Your phone may support English, French, or Spanish languages. If you select English, enter the letters printed on the keys. If you select another language, you can also enter letters with other marks. The special characters corresponding to each key are shown here:
French Spanish
A À Â B C Ç 2
D E Ë È É Ê F 3
G H I Ï Î 4
M N O Ô Œ 6
T U Ü Ú V 8
A Á B C 2
D E É F 3
G H I Í 4
M N Ñ O Ó 6
T U Ü Ú V 8
32 Contacts
To select a language
1.
From the home screen, select Menu → Settings → Display →
Language .
2.
Select a language and press .
3.
Press the appropriate keys to enter special characters.
To enter pauses
You can include a pause in a phone number. A timed pause causes the phone to stop dialing for two seconds. A hard pause causes the phone to stop dialing until you select Release .
When you save the phone number of an automated service, such as voicemail, you may include a pause where you would be required to select an option or enter a password. For example, you could enter a phone number, then a pause, then a voicemail extension or calling card number.
1.
Enter the first portion of the phone number.
2.
Press right through the list of options at the bottom of the screen.
User Guide for the QCP 2035 Phone 33
3.
Press to select a type of pause.
X
– A appears in the phone number for a time pause.
– A appears in the phone number for a hard pause.
4.
Enter the remaining numbers.
34 Contacts
4 SETTINGS
The Settings menu includes the following options.
Silence All
No, normal
Yes, vibe only
Yes, lights only
Information
Keyguard
Guard Now
30s auto-guard
1m auto-guard
5m auto-guard
Auto-guard off
Sounds
Call Ring/Vibe
Ringer Volume
Ringer Type
Roam Ringer
Key Beep Volume
Earpiece Volume
Key Beep Length
Missed Call Alert
Smart Sound (see page 12.)
Key Beep Sound
Business Call Ring
Personal Call Ring
Minute Alert
Display
Backlighting
My Banner
Auto-Hyphenation
Language
Time/Date Format
Main Menu View
Display Contrast
Security
Lock Phone Use
Limit Calls Out
Change Lock Code
Erase All Contacts
Erase Recent Calls
Phone Reset
Call Information
Recent Calls Timer
All Calls Timer
Browser Timerr
Network
Digital or Analog
Roam Option
Roam/Srvc Alert
Privacy Alert
Data/Fax Calls In
Extras
1-Touch Dialing
Browser Prompt
Msg Settings
Voicemail Number
Auto-Erase Text
Voicemail Alert
Page Alert
Message Alert
Net Alert
Accessories
Power Backlighting
Headset Ringing
Car Auto-Answer
User Guide for the QCP 2035 Phone 35
Silence All
You can silence all phone sounds, including the ringer and all alerts, while leaving the phone on. You can replace the sounds by setting the phone to vibrate or light up and flash.
1.
Select Menu → Settings → Silence All .
2.
Select an option ( Normal turns on the ringer.) indicates the phone is in Silence All mode.
3.
Press to save your selection.
Keyguard
The Keyguard locks your keypad to protect your phone against accidental keypresses when the phone is turned on and a call is not in progress.
Keyguard does not prevent you from answering or silencing an incoming call.
36 Settings
To turn keyguard on
1.
Select Menu → Settings → Keyguard .
2.
Highlight one of the locking options and press to save:
• Guard Now— Lock the keypad immediately.
• 30s auto-guard— Lock the keypad if no key is pressed for 30 seconds.
• 1m auto-guard— Lock the keypad if no key is pressed for one minute.
• 5m auto-guard— Lock the keypad if no key is pressed for five minutes.
• Auto-guard off— Unlock the keypad and returns it to normal.
Shortcut— To turn keyguard on from the home screen, press up and hold
.
To turn keyguard off
• Press → → .
User Guide for the QCP 2035 Phone 37
Sounds
You may change the alert sounds your phone makes.
• Select Menu → Settings → Sounds , then the setting you want. For a list of options, see page 35. For information about automatic volume adjustment (Smart Sound), see “To adjust the volume” on page 12.
Display
To change the appearance of your phone’s screen, select Menu →
Settings
→
Display , then the option you want (see page 35 for a list of options).
• To optimize your battery’s performance, select Backlighting , then press
to select an option:
– Disabled— Backlighting is not used.
– 10 seconds— Backlighting is on for 10 seconds after a keypress.
– 30 seconds— Backlighting is on for 30 seconds after a keypress.
38 Settings
– 10 sec. & in call— Backlighting is on for 10 seconds after a keypress, and during a call.
– 30 sec. & in call— Backlighting is on for 30 seconds after a keypress, and during a call.
• To change the appearance of the menus you see when you select Menu from the home screen, select Main Menu View , then the option you want:
– Small Icons
– Large Icons
– List Menus
Security
You must enter your four-digit lock code (typically 0000 or the last 4 digits of your phone number) to set any of the options on the Security menu.
User Guide for the QCP 2035 Phone 39
To lock and unlock the phone
When you lock your phone, you can only call a number your service provider has set up as an emergency number, a service provider number, or a priority number. You can still receive incoming calls.
To lock the phone
1.
Select Menu → Settings → Security → Lock Phone Use .
2.
Select an option:
• Never— Do not lock the phone.
• On power up— Lock the phone every time you turn it on.
• Now— Lock the phone immediately.
3.
Press .
To unlock the phone
• Select Unlock and enter your four-digit lock code.
40 Settings
To limit calls out
• Select Menu → Settings → Security → Limit Calls Out . Select No for unlimited calls, or select Yes, to Contacts to allow calls to contacts only.
To change your lock code
1.
Select Menu → Settings → Security → Change Lock Code .
2.
A message appears: “Change Lock Code?”
. Enter your new • Select Yes and enter a new code, then press lock code again to verify it.
• Select Exit to leave your lock code unchanged.
To erase all contacts
• Select Menu
→
Settings
→
Security
→
Erase All Contacts .
– Select No to leave contacts unchanged.
– Select Yes to erase all contacts. A message appears: “Erase ALL contacts?” Select No to cancel or Yes to erase all contacts.
User Guide for the QCP 2035 Phone 41
To erase recent calls
• Select Menu → Settings → Security → Erase Recent Calls .
– Select No to leave the Recent Calls list unchanged.
– Select Yes to erase all recent calls. A message appears: “Erase ALL recent calls list entries?” Select No to cancel or Yes to erase all recent calls.
To reset the phone
• Select Menu
→
Settings
→
Security
→
Phone Reset .
– Select No to cancel.
– Select Yes to reset the phone. A message appears: “Reset ALL phone settings?” Select No to cancel or Yes to reset the phone.
Note— Your four-digit lock code, Recent Calls list, Contacts directory, InBox and OutBox contents, memos, and service programming are not reset when you reset your phone.
42 Settings
Call Information
This setting allows you to view information about calls and alerts.
Recent Calls Timer
This timer displays the total number and duration of recent calls you have made and received. Press zero.
to select Reset . This resets the timer to
All Calls Timer
This timer displays the total number and duration of all calls you have made and received. You cannot reset this timer.
Browser Timer
This timer displays the total duration of data calls you have made. Press
to select Reset and reset the timer to zero.
User Guide for the QCP 2035 Phone 43
Network
Use this setting to view or change options such as roaming and privacy alerts. Some settings may not be available on all phones.
To select digital or analog mode
1.
Select Menu → Settings → Network → Digital or Analog .
2.
Press to select an option:
• Automatic— Automatically switch the phone between digital and analog.
• Analog only— Set the phone to work in analog mode only.
• Analog call— Force a call into analog mode for the duration of the next call.
• Digital only— Set the phone to work in digital mode only.
44 Settings
Roam Option
This setting determines which signals your phone will accept.
1.
Select Menu
→
Settings
→
Network
→
Roam Option .
2.
Press to select an option:
• Automatic (recommended setting) — Accept any system the phone service provides.
• No Roaming— You cannot make or receive calls outside of your home service area.
Roam/Service Alert
Use this setting to have the phone alert you if you roam outside of your home service area.
1.
Select Menu
→
Settings
→
Network
→
Roam/Srvc Alert .
2.
Press to select an option:
User Guide for the QCP 2035 Phone 45
• Disabled— You are not alerted if you roam outside your home service area.
• When no service— You are alerted with three tones, decreasing in intensity, when service is lost. When service is acquired again, you will hear three tones in increasing intensity.
• On roam change— You are alerted with two tones, decreasing in intensity, when roaming service is acquired. When home area service is acquired again, you will hear two tones, increasing in intensity.
• On any change— You are alerted with three increasing tones if there is a change in roaming service or three decreasing tones if the phone loses service.
Privacy Alert
1.
Select Menu → Settings → Network → Privacy Alert .
2.
Press to select an option:
• Disabled— Do not play any alerts.
46 Settings
• Enabled— Play an audible alert whenever enhanced privacy is lost or regained and a call is in progress.
Note— An alert message always shows on the screen, regardless of these settings.
Data/Fax Calls In
These settings tell the phone how to handle voice and data calls.
1.
Select Menu
→
Settings
→
Network
→
Data/Fax Calls In .
2.
Press to select an option:
• Voice Only— Allow only voice calls.
• Fax, next call— Set the phone to fax mode for the next incoming call or the next ten minutes.
• Data, next call— Set the phone to data mode for the next incoming call or the next ten minutes.
• Fax, until off— Force the phone into fax mode until the phone is turned off.
User Guide for the QCP 2035 Phone 47
• Data, until off— Force the phone into data mode until the phone is turned off.
Extras
These settings allow you to program various options.
1-Touch Dialing
See “To use 1-Touch Dialing” on page 26.
Browser Prompt
You may receive a prompt whenever you attempt to start or exit the browser.
1.
Select Menu → Settings → Extras → Browser Prompt .
2.
Press to select an option:
• At Start— Prompt you when you start the browser.
• At End— Prompt you when you exit the browser.
48 Settings
• Both— Prompt you when you start the browser and exit the browser.
• No Prompts— You do not receive any prompts.
Messaging
The messaging settings allow you to set how you want to handle incoming and outgoing messages.
To change your voicemail number
You can change the phone number assigned to speed dialing location “1” by doing the following:
1.
Select Menu → Messages → Msg Settings → Voicemail Number .
2.
Select Edit to change the number that is currently assigned to speed dial location “1.”
3.
Enter the new number, then select an option:
• Save— Saves the new number.
User Guide for the QCP 2035 Phone 49
• Time Pause— Enters a time pause in the number. See “To enter pauses” on page 33.
• Hard Pause— Enters a hard pause in the number. See “To enter pauses” on page 33.
To erase messages automatically
Use this setting when your phone is low on memory and you want to receive new messages. (This setting does not affect voicemail notifications.)
1.
Select Menu
→
Settings
→
Messaging
→
Auto-Erase Text .
2.
Press to select an option:
• Disabled— Messages are not erased.
• Old InBox— Old, read messages are automatically erased.
50 Settings
Alerts
You can choose how you want to receive alerts for voicemail, pages, text messages, and the Web Browser.
1.
Select Menu → Settings → Messaging , then the type of alert
( Voicemail Alert , Page Alert , Message Alert , or Net Alert ).
2.
Press to select an option:
• Disabled— You are not alerted when a message is received.
• Vibrate once— The phone vibrates once when a new message is received.
• Vibe & remind— The phone vibrates once when a new message is first received, and a reminder vibrates every five minutes until the message is acknowledged by pressing the bottom of the screen.
or , or selecting Ignore from
Note— If a message is received while you are on a call, the phone does not vibrate to remind you.
User Guide for the QCP 2035 Phone 51
• Low beep once— The phone beeps once at a low volume when a message is received.
• Low beeps— The phone beeps every five minutes at a low volume until the message is acknowledged by pressing selecting Ignore from the bottom of the screen.
or , or
• Loud beep once— The phone beeps once at a high volume when a message is received.
• Loud beeps— The phone beeps at a high volume every five minutes until the message is acknowledged by pressing selecting Ignore from the bottom of the screen.
or , or
Accessories
Your phone comes with several features for additional convenience.
52 Settings
Power Backlighting
This allows backlighting to remain on when external power, such as a travel charger, is used with the phone.
1.
Select Menu → Settings → Accessories → Power Backlighting .
2.
Select Normal to keep the default setting, or Always on to keep backlighting on.
Note— Setting backlighting to Always on may drain the battery more quickly.
Headset Ringing
When a headset is attached to the phone, you may choose to have alert sounds come out of either the phone or the headset.
1.
Select Menu → Settings → Accessories → Headset Ringing .
2.
Select Out of phone to have the alerts come out of the phone, or Out of headset to have alerts come out of the headset.
User Guide for the QCP 2035 Phone 53
Car Auto-Answer
If your phone is attached to a portable Hands-free Car Kit (sold separately), you may set it to answer an incoming call after 5 seconds.
• Select Menu → Settings → Accessories → Car Auto-Answer →
After 5 seconds .
54 Settings
5 TOOLS
The Tools menu offers a variety of helpful items.
Alarm Clock
Use the Alarm Clock to set an alert for a specific time. The alert occurs only if the phone is on.
1.
Select Menu
→
Tools
→
Alarm Clock
→
Set .
• Press up or down to select an hour and minutes.
• Press a.m./p.m.
left or right to switch between hours, minutes, and
2.
Press to save.
3.
When the alarm rings, select Snooze to silence the alarm for 10 minutes, or select Off to turn off the alarm.
User Guide for the QCP 2035 Phone 55
Tip Calculator
1.
Select Menu → Tools → Tip Calculator .
2.
Enter the amount of your bill and press .
3.
Select the amount you want to include as a tip ( 15%, 18%, 20%, 10%,
5%, Other ) and press .
4.
Your total bill, including tip, is calculated and displayed.
5.
6.
To split the bill, press
Enter the number of guests and press appears.
right and press to select Split .
. The amount for each guest
56 Tools
Calculator
Use the calculator for basic mathematical equations.
1.
Select Menu → Tools → Calculator .
2.
Use the keypad to enter numbers.
3.
Press to select mathematical operations.
-
=
÷
+
X
Performs the “equals” function.
Inserts the division character after the last number entered.
Inserts the subtraction character after the last number entered.
Inserts the addition character after the last number entered.
Inserts the multiplication character after the last number entered.
.
C
Inserts the decimal point after the last number entered.
Clears all numbers entered and displays a zero.
MR Displays the value currently stored in memory.
M+ Adds the displayed digit to the value stored in memory.
User Guide for the QCP 2035 Phone 57
MC Clears the value currently stored in memory.
± Changes the sign of the displayed number.
Clears one function or one digit from the screen and returns the calculator to digit entry mode. Hold down to clear all of the digits and operations and display a zero.
Exits the calculator and returns to the home screen.
Countdown Timer
This timer counts down for a specified amount of time. It beeps, using the volume set for alerts, when that amount of time has elapsed.
1.
Select Menu
→
Tools
→
Countdown Timer .
2.
Press to Set .
3.
Press up or down to set the hours, minutes, and seconds. To move the cursor, press left or right.
58 Tools
4.
Select Start to begin the countdown.
Select Stop to pause the countdown.
5.
When the alarm rings, press to silence it.
Stopwatch
1.
Select Menu
→
Tools
→
Stopwatch .
2.
Select Start to have the stopwatch begin counting.
3.
Select Stop to quit counting.
4.
Select Reset to set the counter back to zero and have the stopwatch begin counting again.
5.
Press when finished.
User Guide for the QCP 2035 Phone 59
Brick Attack™
1.
Select Menu → Tools → Brick Attack .
2.
To start the game, press to select New .
3.
To pause the game, press , then press to Resume .
The goal of this game is to eliminate bricks arranged in levels. To do this, you send a moving ball upward using a paddle at the bottom of the screen.
To move the paddle, press left or right. If an incoming call alert is received, the game is paused and exited. You can return to play once the incoming call alert is ended.
60 Tools
6 MESSAGES
You can receive, send, and erase messages. Check with your service provider for features available in your area.
• New, unread messages are stored in your Text InBox and are bold .
• Once you have read a message, you can save it to your Filed folder, erase it, or leave it in your Text InBox .
• Once you have sent or scheduled a message, it is stored in your Text
OutBox .
• All of the following procedures start at the home screen unless otherwise indicated.
Retrieving messages
When a text message, page, or voicemail is received, appears on your phone screen. To retrieve voice messages, see “To check voicemail,” below.
To retrieve text messages, see “To view text messages” on page 62.
User Guide for the QCP 2035 Phone 61
To check voicemail
You can check your voicemail in any of the following ways.
Note— A voicemail number may have been pre-programmed into your phone. Check with your service provider.
• When you receive an alert, press
-or-
to select Voice .
• Press and hold to call your voicemail number.
-or-
• Press → .
Select Menu
→
Messages
→
Voicemail , and press
To view text messages
You can view text messages in any of the following ways.
.
62 Messages
When you receive an alert, press to select Text .
-or-
1.
Select Menu
→
Messages
→
Text InBox .
2.
Press up or down to scroll through the list of messages.
3.
Press to read a message. indicates an “Urgent” message.
• Read the message and select an option from the bottom of the screen:
• Reply— Reply to the sender, if their address is available.
• Erase— Erase the current message.
• Save— Save the message to your Filed folder.
• Sender— View the sender’s information. You can select an option to save it to the Contacts directory:
– OK— Returns to the message screen.
– Save New— Save the sender’s information as a new contact.
User Guide for the QCP 2035 Phone 63
– Add to— Add the sender’s information to an existing contact.
– Forward— Forward message to the sender, if their address is available.
– Done— Return to the Text InBox.
4.
Press to see information such as callback number, email address, or
URL. (If a callback number is included with the message, press again to call the number.)
Sending messages
• To learn how to enter text, see “Entering letters, numbers, and symbols” on page 28.
• Scheduled, pending, and sent messages are stored in your Text OutBox .
• If you are sending a message to more than one person, enter a space or a comma between each phone number or email address. If you are sending
64 Messages
to more than one contact, the phone will automatically insert a comma between each contact name. The messages will be sent one at a time.
Note— Usage charges may apply to each message; check with your service provider.
To send a new message
1.
Select Menu → Messages → Send New .
2.
Enter the phone number or email address of the person to whom you are sending the message, or select Contacts to select a phone number or email address from a contact.
3.
Press to select Next .
4.
Enter your message and press to select Next .
5.
Press up or down and press to select an option:
• Send Message— Send the message immediately and save it in your
Text OutBox .
User Guide for the QCP 2035 Phone 65
• Callback Number— Add a callback number to the message. See “To add a callback number to a message” on page 69.
• Delivery Receipt— Send a notification to your phone when the recipient receives the message.
• Priority— Mark the message Normal or Urgent .
• Send Later— Schedule delivery of this message. See “To send a message at a scheduled time” on page 70.
• Save Message— Save the message in your Filed folder.
• Exit— Exit without saving.
Note— If you have selected an option such as Callback Number or Priority , you are returned to the Options screen. Select another option such as Send
Message to send the message.
66 Messages
To send a preformatted message
1.
Select Menu → Messages → Send Preformat .
2.
Select from a list of preformatted messages, such as Call me , I’m delayed , or Need directions .
3.
Enter the phone number or email address of the person to whom you are sending the message, or select Contacts to select a phone number or email address from a contact.
4.
Press to select Next .
5.
Press to select Next again, or select an option.
6.
Press up or down and press for options).
to select an option (see page 65
User Guide for the QCP 2035 Phone 67
To send a saved message
1.
Select Menu → Messages → Filed .
2.
Press up or down through the list of messages.
3.
Press to select a message.
4.
Select an option from the bottom of the screen ( Resend , Send To ,
Erase , or Done ).
5.
Enter the phone number or email address of the person to whom you are sending the message, or select Contact to select a phone number or email address from a contact.
6.
Press to select Next .
7.
Press the screen.
to select Next again, or select an option from the bottom of
8.
Press up or down and press for options).
68
to select an option (see page 65
Messages
Message delivery options
To add a callback number to a message
After creating a message and selecting the Callback Number option, do one of the following.
To send your own phone number:
• Press to select Yes from the options at the bottom of the screen.
To send a specific phone number: a.
Press , then press the bottom of the screen.
b.
Enter the phone number.
right to select Other from the options at c.
Press page 29.
to select Done . To change the text entry mode, see
User Guide for the QCP 2035 Phone 69
If you do not want to send a callback number:
• Press right, then press bottom of the screen.
to select No from the options at the
To send a message at a scheduled time
After creating a new or preformatted message (page 67), you can select when to send it. Once the Send Later option is selected, complete this step:
• Select from a list of options for when to send the message ( 30 minutes,
1 hour, 2 hours, 12 hours, 1 day, 2 days, or 3 days ). The message is scheduled for delivery and stored in your Text OutBox .
Note— You can erase a scheduled message from the Text OutBox , but you cannot cancel delivery of the message.
70 Messages
Erasing messages
1.
Select Menu → Messages → Erase Msgs .
2.
Press up or down and press to select an option:
• No— Cancel and return to the Messages screen.
• Entire InBox— Erase all messages in your Text InBox .
• Old InBox— Erase read messages in your Text InBox .
• Entire OutBox— Erase all messages in your Text OutBox .
3.
A message appears: “Erase ALL?” Select Yes to erase messages or No to cancel.
Tip— To learn how to erase messages automatically, see page 50.
User Guide for the QCP 2035 Phone 71
To erase messages one at a time
1.
Select Menu → Messages .
2.
Press down and press to select the type of message you want to erase ( Voicemail, Text InBox, or Filed ).
3.
Press to select the message you want to erase.
4.
Select Erase to erase the message. A message appears: “Erase this message?”
5.
Select Yes to erase the message, or No to cancel.
Note— You can erase a scheduled message from the Text OutBox , but you cannot cancel delivery of the message.
72 Messages
Troubleshooting messages
Low memory
If your phone is low on memory or is out of memory, you may not be able to receive new messages. An alert appears every time memory is more than
75% full: “WARNING! Memory is nearly full!” If you see this alert, do the following:
1.
Press to select OK .
2.
Erase contacts or text messages to free up more memory. See “To erase information from a contact card” on page 21 or “Erasing messages” on page 71.
If you cannot send messages
A message delivery attempt may fail if there is no service or the message is rejected by the network. Your phone will try to send the message again later. If a message cannot be delivered, an alert appears. Press select OK .
to
User Guide for the QCP 2035 Phone 73
7WEB BROWSER
You can use your phone to browse the Internet if you have obtained phone
Internet services from your service provider and if over-the-air Internet access is available in your area.
Using the Web Browser
To learn how to enter text in the Web Browser, see “Entering letters, numbers, and symbols” on page 28.
Note— You cannot receive incoming calls while you are in the Web Browser and a data call is in progress.
To start the Web Browser
• From the home screen, select Menu → Web Browser .
To exit the Web Browser
• Press .
74 Web Browser
-or-
Press from the Web Browser home screen.
Web Browser options
The following options may appear on your screen:
• Home— Return to the main Web Browser window, or home page.
• Mark Site— Save the current location as a bookmark for easy access.
• Bookmarks— Display a list of your saved web sites.
• Setup
– Show URL— Display the entire URL.
– Phone.com™— Display information about your Web Browser version.
– Encryption— Do not use unless you are instructed to do so by your service provider.
– Set UP.Link— Select a different browser server. You can use this option if you have more than one Web Browser account, such as one for business use and one for personal use.
User Guide for the QCP 2035 Phone 75
– Restart— Restart the Web Browser.
Indicators and alerts
Web Browser screen
• The appears in a secure Web Browser session.
• Links are identified with an underline and an arrow:
Your weekend weather will be warm and sunny, with highs in the 70s ...
76 Web Browser
Net Alerts
If your service provider has activated Internet services on your phone and you are in an area that provides over-the-air Internet access, you may receive Net Alerts. These short messages allow you to quickly access information on the Internet.
User Guide for the QCP 2035 Phone 77
8 TROUBLESHOOTING
What is my lock code?
The default lock code is usually either 0000 or the last four digits of your phone number. If you forget your lock code, call your service provider.
How do I lock and unlock the phone?
See “Security” on page 39.
How do I turn my ringer on?
Select Menu → Settings → Silence All
3
Normal .
How do I change the ringer volume or ringer type?
See “Sounds” on page 38.
How do I store phone numbers?
See “To save a phone number” on page 18.
78 Troubleshooting
How do I change my banner?
Select Menu
→
Settings
→
Display
→
My Banner . Enter your text and press .
How do I speed dial?
Enter the one- or two-digit speed dial number and press .
How do I erase recent calls?
See “To erase recent calls” on page 42.
What do the icons on the top of the screen mean?
See page 4 for screen icon descriptions.
My phone displayed the message “Reading Info. Please wait ...” when I turned it on. What does this mean?
Your phone is performing routine maintenance. This normally takes a few minutes.
User Guide for the QCP 2035 Phone 79
My phone is out of memory. What do I do?
Erase old messages or contacts. See “To erase messages automatically” on page 50 and “To erase information from a contact card” on page 21.
How do I get accessories for my phone?
To shop for phone accessories, visit www.kyocera-wireless.com/store , or call (800) 211-1537 (U.S.A. only) or (510) 683-4004.
How do I become a product evaluator?
To participate in the testing and evaluation of Kyocera Wireless Corp. products, including cellular or PCS phones, visit beta.kyocerawireless.com
.
Where to find help
Your service provider’s customer support department may be accessible directly from your phone when you dial a number (check with your service provider). They can answer questions about your phone, phone bill, call coverage area, and specific features available to you, such as call forwarding or voice mail.
80 Troubleshooting
For questions about the phone features, refer to the materials provided with your phone. Visit www.kyocera-wireless.com
for the most current materials.
For additional questions, you may contact the Kyocera Wireless Corp.
Customer Care Center as follows:
• Web site: www.kyocera-wireless.com
• Email: [email protected]
• Phone: (800) 349-4478 (U.S.A. and Canada only) or (858) 882-1400.
Before requesting support, please try to reproduce and isolate the problem.
When you contact the Customer Care Center, be ready to provide the following information:
• The name of your service provider.
• The actual error message or problem you are experiencing.
• The steps you took to reproduce the problem.
User Guide for the QCP 2035 Phone 81
• The phone’s electronic serial number (ESN). To find the ESN, remove the battery as follows: a.
Hold the phone face down with the antenna pointing down.
b.
Place your thumb on the ridges of the battery door, then push down with your thumb and slide the battery door away from you until it stops (about 1/2 inch or 1.27 centimeters).
c.
Move your thumb to the side of the phone, then slide the battery door off of the phone.
d.
Tilt the phone to remove the battery. The ESN is visible after the battery is removed. It should start with “179-” or “B3-.”
Replace the battery as follows: a.
Extend the antenna.
b.
Place the battery into the phone with the metal contacts facing down and towards the bottom of the phone.
c.
Lay the keypad flat inside the faceplate.
82 Troubleshooting
d.
Align the slots in the phone to the posts on the faceplate.
e.
Close until latched together.
f.
Align the battery door to the grooves on either side of the phone.
g.
Slide the battery door on while pressing down firmly, ensuring that the battery door clicks into place. Check and repeat if the battery door is not aligned. Do not force.
e d c
User Guide for the QCP 2035 Phone 83
Index
Numerics
1-Touch Dialing, 24
A
Alarm Clock, 55 alerts, 51, 77 analog mode, 44 answering calls, 11
B backlighting, 35 power, 35, 53 battery care and safety, 14 performance, 16 removing, 82 replacing, 82
84
C calls answering, 11 ending, 11 making, 11 muting, 12 unmuting, 12
CDMA, enhanced voice privacy, 6 characters
French, 32
Spanish, 32
Clear key, 3 contact calling, 23 editing, 21 erasing, 21 saving a phone number as, 20 searching for, 22
Contacts directory calling from, 23 searching, 22
Index
Countdown Timer, 58
D data/fax setup, 47 dialing
1-Touch, 24 from Recent Calls list, 28 speed, 25 digital mode, 44
E
End/Power key, 4 ending calls, 11 enhanced CDMA voice privacy, 6
F faceplate removing, 82 replacing, 82
French characters, 32
H hanging up, 11 hard pause, 33
I icons, 5
InBox, Text, 61
Internet browser, 74
K
Keyguard, 36 keypad locking, 13, 37 unlocking, 13, 37
L languages, 32 letters entering, 28 special characters, 32 locking
User Guide for the QCP 2035 Phone 85
keypad, 13, 37 phone, 40 phone numbers, 19
M making calls, 11 messages erasing, 71 automatically, 50 new, 61 preformatted, 67 scheduled, 61, 70 sent, 61 troubleshooting, 73 mode analog, 44 digital, 44 mute, 12
N navigator key, 3
86
Net Alerts, 77
O
OutBox,Text, 61
P pauses hard, 33, 50 timed, 33, 50 phone locking, 40 unlocking, 40 phone number finding your own, 10 locking, 19 making secret, 19 power-save mode, 15 privacy enhanced CDMA, 6
R
Recent Calls list
Index
description of, 26 dialing from, 28 viewing, 27 redial last number called, 26 resetting the phone, xi roaming, 45
S safety, xii saving a phone number, 18 screen icons, 5 secret phone numbers, 19
Select key, 4
Shift key, 3 silence all sounds, 36 ringer, 11
Silence All mode, 36
Smart Sound (see also volume, adjusting automatically), 12
Sounds, 38
Space key, 4 special characters, 32 speed dialing, 25
T text entering, 28 entry modes, 28
Text InBox, 61
Text OutBox, 61 timed pause, 33
U unlocking keypad, 37 phone, 40 unmute, 12
V voice privacy, enhanced CDMA, 6 voicemail calling, 25
User Guide for the QCP 2035 Phone 87
changing number, 49 volume adjusting automatically (see also
Smart Sound), 12 adjusting manually, 12
W
Web Browser, 74
88 Index
advertisement
Related manuals
advertisement
Table of contents
- 19 Getting Started
- 19 Installing the battery
- 23 Screen icons
- 25 Menus
- 27 Using menus
- 28 Basic functions
- 32 Battery
- 36 Contacts
- 36 Working with contact cards
- 42 Speed dialing and 1-Touch Dialing
- 44 Working with the Recent Calls list
- 46 Entering letters, numbers, and symbols
- 53 Settings
- 54 Silence All
- 54 Keyguard
- 56 Sounds
- 56 Display
- 57 Security
- 61 Call Information
- 62 Network
- 66 Extras
- 67 Messaging
- 70 Accessories
- 73 Tools
- 73 Alarm Clock
- 74 Tip Calculator
- 75 Calculator
- 76 Countdown Timer
- 77 Stopwatch
- 78 Brick Attack
- 79 Messages
- 79 Retrieving messages
- 82 Sending messages
- 87 Message delivery options
- 89 Erasing messages
- 91 Troubleshooting messages
- 92 Web Browser
- 92 Using the Web Browser
- 94 Indicators and alerts
- 96 Troubleshooting
- 102 Index