Monogram ZGP486LDNSS Range Installation instructions

MONOGRAM 48" ALL-GAS PROFESSIONAL

RANGE WITH 6 BURNERS AND GRIDDLE

ZGP486NDNSS

(NATURAL GAS)

ZGP486LDNSS

(LIQUID PROPANE)

DIMENSIONS AND INSTALLATION INFORMATION

(IN INCHES)

Professional ranges offer a number of choices in size and cooktop configurations.

All Professional Ranges are factory set for natural or liquid propane gas. The correct model should be ordered for the installation situation.

NOTE

Conversion kits are included with the range if the wrong gas type was ordered. High Altitude kit, WB28K10553 for operation above 6,000 feet (for Natural and LP gas models), is also available. The kits must be installed by a qualified service technician at additional cost.

INSTALLATION INFORMATION

Before installing, consult installation instructions packed with product or online at Monogram.com for current dimensional data.

A suitable overhead vent hood is required for imodels with a grill and is recommended for all other models.

ADVANCE PLANNING

Refer to dimensional drawings for appropriate placement and necessary clearances when planning the installation.

• Working areas adjacent to the range should have

18" minimum clearance between countertop and cabinet bottom.

• Clearance between range and side wall or combustible material must be at least 12" on each side.

• Installation must conform with local codes. In the absence of local codes, the range must comply with the National Fuel Gas Code, ANSI Z223.1-1990.

35 1/4" to

13" max.

28 1/4"

Depth to front of door

47 7/8" width

48" minimum to combustibles

Non-Combustible

Material

18" min.

12" minimum each side

3 1/4" to 4 3/4"

Toekick/leg height

12" minimum to adjacent wall

WARNING

Installations without a hood require 48" minimum to combustibles. A custom hood installation with exposed horizontal combustible surfaces must have an Auto-On feature. Refer to hood installation instructions for specific hood clearances.

The surface of the entire back wall above the range and below the hood must be covered with a noncombustible material such as metal, ceramic tile, brick, marble or other stone.

36" min.

ADDITIONAL CLEARANCES:

Allow 12" minimum clearance to an adjacent wall on each side.

Working areas adjacent to the rangetop should have

18" minimum clearance between countertop and the bottom of the wall cabinet.

Product Specification Created 8/19

MONOGRAM 48" ALL-GAS PROFESSIONAL

RANGE WITH 6 BURNERS AND GRIDDLE

ZGP486NDNSS

(NATURAL GAS)

ZGP486LDNSS

(LIQUID PROPANE)

DIMENSIONS AND INSTALLATION INFORMATION

(IN INCHES)

ELECTRICAL REQUIREMENTS

Ranges must be hooked up to a 120V, 60Hz properly grounded dedicated circuit protected by a 15-amp circuit breaker or time-delay fuse.

OPTIONAL BACKSPLASH ACCESSORIES

The range requires a 12" minimum clearance to a vertical combustible surface at the rear. A backsplash is required for installations with less than 12" clearance. The following backsplash accessories are available, or a custom, noncombustible backsplash can be used.

ORDER ONE WITH A 48"-WIDE RANGE BACKSPLASH

UX12B48PSS–12" backsplash

UXADJB48PSS– 30"-36" adjustable-height backsplash with warming shelf

8"

SIDE VIEW WITH A BACKSPLASH

6 1/2"

11" 21"

Gas/

Electric 3"

2"

13/16"

10-1/2"

28-7/8" to Front

Edge

48"

Locate gas and electric as shown

GAS SUPPLY

• The natural gas models are designed to operate at

5" water column pressure. For proper operation, the pressure of the natural gas supplied to the regulator must be between 7" and 13" water column.

• The LP models are designed to operate at 10" water column pressure. For proper operation, the pressure of the LP gas supplied to the regulator must be between 11" and 13" water column.

Optional

Backsplash

Accessories

30-36"

12"

35-1/4" to

36-3/4"

1-1/2"

3-3/16"

Control Panel

Depth

28-1/4" to

Beveled

Edge of Control

Panel Bullnose

27-1/2" to

Beveled Edge

- Maximum

Adjacent

Cabinet Depth for

Flush

Installation

28-1/4" to Front of

Door

30-7/8" to Front of

Handle

48-1/4" with Oven Door

Open

7" Control

Panel Height

Product Specification Created 8/19

MONOGRAM 48" ALL-GAS PROFESSIONAL

RANGE WITH 6 BURNERS AND GRIDDLE

ZGP486NDNSS

(NATURAL GAS)

ZGP486LDNSS

(LIQUID PROPANE)

FEATURES AND BENEFITS

THE MONOGRAM STATEMENT COLLECTION

Edge-to-edge handles, polished stainless steel, smoothly finished edges and large electronic control knobs offer an authentic professional appearance.

SEALED, DUAL-FLAME STACKED BURNERS

Deliver a full spectrum of heat settings, from an ultra-low

140° F simmer to an intense 18,000 BTU

MONOGRAM PROFESSIONAL OVEN SYSTEM

Combines European, reverse-air convection technology and six heating elements in each oven to provide superb baking results

HEAVY-DUTY, FULL-EXTENSION RACKS

Glide smoothly in and out on stainless steel ball bearings for easy access, and are designed to remain in the oven during the self-clean cycle

LED TASK LIGHTS

Below the bullnose, provide a functional and theatrical touch

STAINLESS STEEL AND ALUMINUM-CLAD GRIDDLE

Offers 18,000 BTUs* of cooking power, allowing fast and consistent heating across the entire cooking surface

STAR-K CERTIFICATION

Allows Monogram ranges to operate in Sabbath mode

A BAMBOO CUTTING BOARD

Is included

OPTIONAL FULL-WIDTH STAINLESS STEEL TOEKICK

Is included with the range

STAINLESS STEEL GRILL/GRIDDLE COVERS

Are included with the range

LARGE TEMPERATURE AND TIME DISPLAYS

Make it easy to monitor cooking progress

HALOGEN LIGHT COLUMNS

Provide a clear view, regardless of rack position

EVERYDAY OVEN

Is just the right size for 9" x 13" casserole dishes

MODEL ZGP486NDNSS – Natural Gas

MODEL ZGP486LDNSS – Liquid Propane

*Natural Gas Model

Product Specification Created 8/19