Kodak Retina automatic III Manual
The Kodak Retina automatic III is a fully automatic miniature camera with a range of features designed for effortless picture-taking. It features automatic exposure control, a coupled rangefinder for precise focusing, and a large-image viewfinder for clear composition. You can select any shutter speed from 1/8 second to 1/500 second, perfect for capturing fast-moving subjects like sports events. The camera also includes a built-in exposure meter for accurate exposures, zone focusing for quick snapshots, and a film speed setting to ensure optimal results for any film type. The Retina automatic III is a reliable and beautifully designed camera offering precision, offering a range of features to make your photography experience a pleasure.
Advertisement
Advertisement
Kodak
C A M E R A r J - " - " , ,",
automatic
m
Dear Photo Fan,
In your RETINA automatic III you own a fully automatic miniature camera .
You can select any shutter speed you wish right up to the top speed of
1 / 500 second.
You can take rapid action sports pictures iust as easi ly as lifelike snapshots.
The fully automatic mechanism of your
RETINA automatic III will always select the correct lens opening for the pre-set shutter speed.
Your RETINA automatic III iust wi ll not allow you to make any mistake in exposure .
The exposure release " thinks " for you and locks itself when the light is too poor for taking a picture .
This is indicated by a STOP signal in the finder .
Focusing with the coupled rangefinder of your RETINA automatic III is an easy matter of seconds.
And what you own is not iust
" any " automatic camera . It is the RETINA automatic III and this means all that is best in camera design and offers the utmost in precision, reliability and beauty .
It is easy to take pictures with your
RETINA automatic 1111
Set th
e
shutte
r
spee
d Turn the shutter speed ring until the required shutter speed is opposite the letter A and the setting index .
Focu
S
i s
ght and shoot
Move the outlines of the double image in the bright rangefinder field together to coincide.
Compose your subject inside the luminous viewframe of the large-image viewfinder and slowly depress the exposure release. (Turn to page 7 for details on the appearanc;e of the STOP signal in the finder .)
3
4
Setting the shutter speed
For fully automatic picture-taking with your
RETINA automat i c III you can use all shutter speeds from ' h o seco nd up to ' / 500 second_ The figures 30, 60 , 125 , 250, and 500 on the shutter speed ring (a) are fractions of a second. Turn the shutter speed ring until the required shutter speed, ' / 60 second, for instance, is opposite the lett er " A" (a utomatic ) and the setting index (b).
Use faster shutter speeds (1 h 50 or ' / 500 second) for fast moving subiects as in spo rt s events.
(B is the shutter setting for time exposures.)
If the letter " An should happen not to be opposite the setting index, iust turn the lens opening ring (c) until " A n clicks in place opposite the setting mark.
Focusing
look through the eyepiece of the large-image finder and you will see the subject outlined by the luminous view-frame. In the center of the field of view you will also notice a round rangefinder field. Until the camera is facused for the correct distance, this field shaws a double image of the subject. Turn the focusing knab (d) until the outlines of the double image move together and coincide. The lens is now accurately set for the film plane-to-subject distance .
Your RETINA automatic III also lets you use the two snapshot zone focus settings . See details on page 15. lower picture: Subject In sharp focus.
Middle picture: Subject still out of focus .
5
Sight and shoot
The reflected brilliant frame indicotes the field area and prevents faulty view ing . You can hold the camera either horizontally or vertically.
When sighting a picture take special care not to get your fingers in front of the honeycomb cell window of the exposure meter .
When you have your subject nicely in the finder slowly press the release key (e). Naturally, the shutler has to be set by means of the rapid wind lever (f) before it can be released.
It is advisable to operate the rapid wind lever (f) immediatly a p ictur e has been taken . Your camera will then al ways be ready for action .
If you use the built-in exposure meter in the normal way when photographing subjects w hich are strongly back-lit or which include a very bright area such as a lamp, you may get a false reading and an underexposed picture. For subjects such as these you should aim the camera first at a dark part of the subject, press the release slowly until the first resistance is felt, and while still holding down the release button, re-sight the camera on the subject. Only then should the release button be fully depressed to make the exposure.
6
Preventing under
-
exposure
If there is not enough light to take pidures at a selected shutter speed with the type of film in the camera, your RETINA automatic III will indicate this by the appearance of a
STOP signal in the viewfinder and t h e body release will lock . I f this happens you must change the shutter speed to a slower one or, if ' h o is already set, you can take such a photograph only with flashlight . See hints on page 16 .
L a r g e i mage v i ew fi nde r w i th r e flecte d brillian t frame and STOP s i gna l.
Loading the film
1. Always laad yaur RETINA automatic III in the shade _ or at least in the shadow of your body.
2. To open the back of the camera, press the milled lever ( g ) clockwise; the opposite end of the lever then uncovers the opening button (h). Press this button and the back springs open.
3. Pull the rewind knob ( i ) out os far os it will go .
4. Ins ert the magazine in the supply chamber with the protruding end of the film pointing towards the bu ilt-in take-up spool ( i ).
"'---..: =
5. Turn the take-up spool by its flange until a slot points upward.
6. With the lower edge of the film against the lower take-up spool flange push the trimmed end of the film into this slot r---=--"~_ "' ''Iiii so that the tooth at one side of the slot engages
0 perforotion of the film.
7. Pull the film over the film track and turn the take-up spool by its flange until the teeth of the sprocket (k) engoge the perforations on both sides_
8 . Close the bock of the camera, by pressing the back agoinst the body until you h ear it lock.
9. Push bock the rewind knob (i) to its normal position and turn it in the direction of the arrow until a slight resistonce is felt.
This takes up the s lack film inside the magazine .
8
Milled lever
Opening button
Film transport sprocket
Having loaded the camera, remember to
•
•
•
Set the film counter
Set the film speed
Set the film indicator
This is how to set the film counter
The film counter operates from No. 36 back to No.1
, and it t hu s shows you at any tim e how many exposures you have left on your film.
Press and hold down the film release button (I); then , at th e same tim e, press the film counter advance (m) in the direction of the arrow as many times as necessary to bring the diamond-shaped +-mark (between 1 and 36) opposite the notch in the upper edge of the film counter window (n) . When using a 20-exposure magazin e set to the diamond +-mark near 23.
Operate the rapid wind lever now to the limit of its travel. Press the film release button (I ); then swing out and release the rapid wind lever again . Repeat this as often as required to bring the film counter to 36 or 20, depending on the number of exposures in you r magazine .
As you operate the rapid wind lever, the rewind knob should turn against the direction of its arrow. This is your indication that the film is being correctly advanced.
10
Very
i
mportant
:
the film speed
The speed rating of the film in your RETINA automatic III is a most important factor in obtaining correctly exposed pictures. You must therefore set the film speed scale of the shutter speed ring with particular care . ASA speeds are engraved in red on this scale.
To set, press down the lever (0) and turn the shutter speed ring (d) until the red dot is opposite the required ASA or DIN figure, as for instance 50 ASA.
The film
i
ndicator
-
a useful memory aid
The rewind knob is provided with an indicator to remind you of the type of film you have loaded in your camera. To set the indicator dial turn the inner milled ring until the black dot is opposite the symbol for the type of fi l m in the camera .
Color
:oC>-
-J:;i-
Color -0:. black-and-white film daylight colour film artificial light colour film
The position of the film indicator has no effect on the exposure itself;
11
When your
film
reaches the end
After the last exposure the film must be rewound into its magazine . To do this, press the clutch button ( p ) in the camera base and turn the rewind knob ( h) in the direction of the arrow until the clutch button ceases to rotate .
(Watch the black dot on the clutch button.)
Then open the camera back in subdued light, pullout the rewind knob, and remove the magazine.
If you forgot to set the film counter, it may happen that you reach a point where the rapid wind le ver cannot be pulled all the way out.
This indicates that the film is now finished .
Press the clutch button to allow you to complete the winding operation. Rewind the film and unload as described above .
12
Films for colour
Kodacolor Film: Makes colour negatives, which are then printed on paper to provide natural-colour prints . Faster than Kodachrome Film, it a llo ws good pictures in lighting hitherto considered unsuitable for co~our photography (ASA 32 BS 26 ° ).
Kodachrome Film: There are two kinds Daylight Type, and for Photoflood light, Type A.
Both give miniature colour s lid es at no extra processing charge, from which prints and enlargements in colour or black-and-white can be made subsequently . Can be used with flash (ASA 10 BS 21 ° ) .
Ektachrome Film: Intermediate in speed, gives similar results to Kodachrome Film but can be processed at home. It is sold at prices not includ ing processing . In Britain it is available only as a daylight type film . Can be used for flash (ASA 32 BS 26 ° ) .
High-Speed Ektachrome: Very high speed reversal colour film for exposure in daylight, especially useful for dull-light sports and action photography . Primarily for processing by user (ASA 160 BS 33 ° ).
Films for black-and-white
Itlus-X Pan Film : An excellent film for both daylight and artificial light photography. Fast but fine-grain emu lsion ensures negatives from whic h big enlorgements can be made
(ASA 160 BS 33 ° ) .
Itanatomic-X Film: A high-definition panchromatic film giving exceptional image sharpness by virtue of its thin cOating, very fine grain, and freedom from halation and light-scatter.
Ideal for negatives permitting a high degree of enla rgement , espec ially w hen developed in Kodak High Definition Developer (AS A 40 BS 27 ° ).
Tri-X Pan Film : A panchromatic film of very high speed. It is ideal for snapshots in very poor light outdoors, for flash-snaps in large rooms, for taking pictures by Photoflood light, and for "avai labl e-light" photography ( ASA 400 BS 37 ° ).
13
How to read the depth of field
The depth of field is indicated between the arrows engraved in the front of the shutter.
These arrows are the depth-of-field limits at a lens opening of f / 4. The depth of field increases beyond these arrows with every smaller lens opening down to f/22.
Aim your camera at the subiect and look straight down on the needle of the exposure meter (see i llustration above left ). The needle indicates the automatically set lens opening, say f i ll .
With the distance set to 10 ft. you can read off about 6 ft . at the left and approx. inf o ( 00 ) at the right against the two figures 11 on the depth-of-field scale (r). Everything will be sharp within this range.
14
If yo u want to shoot with an even greater depth of field change the automatically set lens openi n g by turning the shutter speed ring (a) until the needle of the exposure meter points at the figure 16, for instance.
The re l evant shutter speed is automatically set at A. ( T he divisions without figures identify, from left to right: f/2.S f / S.6 fill f/22.)
Remember that pictures can only be taken where the needle def l ection remains inside the two red areas which are the limits of the exposure meter measuring range .
To take full advantage of the existing depth of field for snapshots turn the focusing scale to the black dot near
10 ft. for subjects at close range or to the red dot nea r 30 ft. for remote subjects .
Taking pictures without automatic exposure control
To the advanced amateur the RETINA automatic III offers still mor e picture tak i ng possibilities. For intentional under or over-exposures set the re quired l ens opening by turning the lens open i ng r i ng ( c ). I n the e xampl e above we have set a shutter s peed of ' / .DD second and an aperture of f / 4.
You can now take picture s w it hout th e auto-control .
15
16
Flash pictures with the RETI NA automatic III
Slide your flash gun, the KODAB LlTZ , for instance, into the accessory shoe of your camero, plug the flash coble into the flash socket (s), and set the required distance.
For flash shots with flashbulbs turn the shutter speed ring (0) to ' ho second. In conjunction with electronic flash any shutter speed from ' h o up to
' / 500 sec. may be used.
Your RETINA automatic III always operates in the X sy nchronizer position. The lens opening is dependent en the guide number of the flash bulb or electron ic flash unit used and also upon the distance. The guide number is specified on the packages of the flash bulbs and in the operating instructions of electronic flash units . Th e following rule applies: guide number divided by distance
= lens opening.
If, for instance, your guide number is 96 and your distance
12 ft., 96 divided by 12 is 8. This means that you have to turn the lens opening ring (c) until the figure 8 on the lens opening ring is opposite the setting mark . The automatic control is now disengaged and you are ready to shoot.
Time exposures are possible too
For time exposures turn the shutter speed ring until the letter B is opposite the setting mark (b).
You will feel a slight resistance between ' 13 0 sec. and B . The automatic exposure control is now disengoged. Then set the required lens opening by turn ing the lens opening ring (c). Th e shutter will remain open for as long as the expos ure release is depressed. Such pictures should be taken on a tripod and with a cable release which screws into the socket (t).
17
18
Close
-
ups between 3 and 8 feet
When taking pictures of subjects between
3 and 8 feet the field of view outlined by the luminous frame in the large-image viewfinder does not show what will actually appear in the final picture because the finder and lens are spaced an inch or so apart, and this is called parallox. To compensate for such parallax at a distance of 3 ft. the subject must be seen within imaginary lines , drawn between the two opposite pointers near the top of the view-frame and the opposite side of the view-frame (dotted in the il l ustration). With subjects farther away than 3 feet the error decreases, and beyond
8 feet you don ' t need to worry at all.
Changing partly exposed films
If you have to change a film that you have only partly exposed, first rewind that film into the magazine (page 12). Rewind o.nly as long as the clutch button rotates, then stop. This will leave the trimmed film leader outside the magazine . Remove the film from the camera and mark on the magazine the number read off the film counter. When reloading the partly exposed film at a later date , first load it in the usual way and set the film counter to the diamond, then operate the rapid wi nd lever with the film release button depressed until the number that you have marked on the film magazine reappears in the film counter window .
Eyesight correction
If you use spectacles but do not wear them while taking pictures and so cannot see the finder image clearly, you can order a special correction lens for your photo dealer . This lens screws into the finder eyepiece mount. When ordering please state the exact power required in dioptres
+ or . No correction lenses can be supplied for correcting astigmatism.
Care of the camera
Protect your lens against damage and avoid finger prints on the lens surface and the finder wi ndows . For cl ean ing t he outer glass surfaces preferably use a soft sable brush or special lens tissues. From time to time also dust the film track and supply chamber with a brush.
19
Use filters for better pictures
Filters are used wi th block-andw hit e film to obtain correct tone rendering and for special effects.
With colour films , used in a camero as the RETINA automatic, filters are u se d to ch a nge the colour of the light to suit th e particular colour film in u se.
Most filters ha ve w hat i s called a filter factor. This is th e factor by w hich th e exposure must be increased to compensate for the light absorbed by the filter.
With the RETINA automatic III , this i s best allowed for by reducing the film speed setting as follows :
Reduce the film speed setti ng by the following number of divisions *)
Kodak filters for black-and-white film
Light yellow ( f I ) ...
.
...........
.
..............
.
..
.
..
.
.....
.
.......
.
..
.
..
.
..
.
.........
.
......
.
.....
Medium ye llow (f II ), yellow-green ( f III ) .
.....
.
...
.
.
..
...........
• ..
• ..
• .....
• ...............
.
.. 1
'12
~~r(~:ll~ ' ~~~::::::::::::::::::::::::::::::::::::::::::::: : :::::::::::::::::::::::::::::::::::::::: r~:
Th e above filters must NEVER be used with colour films.
Kodak Wratten filters for colour films
Wratten No .
1 A Skylight ( ultra-violet ) ...............
.
..................
.....
..............
.
...... 0
Wratten No .8
5 ( amber ) f or use with Kodachrome Film Type A for daylight ex po sures .
..
.
...
...
Wratten No. 85 B ( amber ) for use with Ektachrome Film Type B for daylight exposures .
.
.
.
........
Wratten No . 85 C ( amber ) for u se with Ektachrome Film Type F and Kodachrome film Type F
'12
'12 for daylight exposures .
.
.
.
........
......
................................................
Wratten No. 80 B ( l ight blue ) for use with Kodachrome and Ektachrome Films , Da y ligh t Typ e for Photoflood exposures ...
...
..
.
.....
.
...........
.
.................
.
.
..
..
.
......
..
..... 1
'12
Kodak Pola Screen for reflection control and sky darkening wit h colour film ..
.
..........
.
...... pj,
*) On e film speed division corresponds to a doubling or halving of the ASA s peed , e. g . from
25 to 50 ASA .
20
Example
You wont to use a yellow-green filter (F III) for a shot on block-and-white film . On the film speed scale you have set, for instan ce, 50 ASA.
The table on the preceding page indicates that the film speed setting must be reduced by
1 division if a yellow-green filter is used . Your new setting on the ASA scale therefore becomes 25 ASA (see illustration) .
When the filter is removed again, remember also to reset the · film speed accordingly In our example bock to 50 ASA .
21
22
Depth
of
Field Table
(Sharp Zones* in Feet)
-
Aperture
2,8
4
5,6
8
11
I
I from to from to to
I
I
I 3' 11" I 4 ' 7/1
At distance setting in feet
Depth
I I 3,5
3'1 "
3 ' 7//
3'
I 4 I 5 I 6 I 8 I 10 I 15 I 30 I
00
I
3 ' B "
4 ' 3 "
3 ' 7 "
I
4 ' 7 "
5 ' 5 " I
5'6 " 7 '
6'10" I 9 ' 7 " I
8 ' 3 "
I
12 ' 9 "
12 ' 5 " 22 ' 8 "
I 19 ' 8 "
108 '
48 '
I <Xl
1 32 ' ~0"
3'9" I 4 ' 5 " I
4'5"
5 ' 9 " I
5 ' 3 " 6'5" 7'11 " 11'6 "
7 ' 3 " I 10' 5 " I 14 ' 6 " I 30 ' I
16'8 "
<Xl
14~
"
I from 2' 11 " 3 ' 6 "
I
4'3 "
6' I
5 '
7 ' 11 " I
6 ' 2"
12 ' I
7 ' 2 "
16 ' 5 " I
9 ' 10 "
40 ' I
I 24 ' 2 "
<Xl
I
I from to from
I
2'9"
4 ' 3 " I
3 ' 3 "
5 '
I
4 '
6 ' 7 " I
4 ' 8 " I
5 ' 9 "
8 ' 10 " 14 ' 11 "
I 6 ' 6 "
23 ' I
8 ' 4 "
160 ' I
1~9
"
I 16'8
00
"
3'8 "
I
4 ' 4 "
I
5 ' 2 "
7 ' 11 " 11 '1" 23 ' 5 "
I
5 ' 10 "
50 '
7'5 /1
9 ' 2" 12'6 " to I
2'7"
4 ' 7 " I
3'
5 ' 6 " I I <Xl I <Xl I
<Xl
5 ' 6 '1
16
I from to I
2'5 "
5'6 " I
2'8 "
6 ' 8 " I
3 ' 4 "
11'1 " I
3'8"
20 '
22
I from to I
2 ' 2 "
7 ' 1 " I
2 ' 5 /1
10' I
2 ' 9"
24'2 "
I
*
Distonces are measured from the film · plane .
3 ' 4"
<Xl
I
I
4 ' 4 "
155"
3'7 "
<Xl
I
I
4 ' 10 "
00
4 '
<Xl
The depth of field is calculated for a circle of confusion of '/500".
I
I
<Xl
4 ' 7"
<Xl
7 ' 8'3 "
I <Xl I <Xl
I
5'4 " 6 , 2"
'"
I
'"
Your accessories for the RETI NA automatic III
The lens hood should be port of your standard outfit. There is a practical leather case available to take the lens hood plus three filters .
The close-up rangefinder (the model marked f / 45) , used with the N I, N II, and N III a close-up lenses, permits near shots between 38 1
/ 4 and 12 inches (97 to 30 cm) . It shows the e x act field of view , free from parallax .
The close-up attachment, used with the three R close-up lenses, covers the range between
11 and 6 inches (28.5 and 18 .
5 cm) . A practical attachment for close up photography .
With the sports finder model b you can follow fast moving ' subjects more conveniently. It is particularly suitable for sports shots and such subjects as children and animals at play.
The right-angle finder permits viewing at 90 degrees to the shooting direction . It fits over the viewfinder eyepiece mount.
The table stand provides a specially steady camera support for subjects requiring long exposure times . It is particularly versatile when used with a close-up rangefinder and the close-up attachment .
The copying outfit with supplementary lighting unit is an ideal accessory for copying documents, prints, books, etc. 5 7
/ . x 8 1 /2 and 8 1 /2 x 11 3
/ 4 inches in size .
The micro adapter fits all microscopes with a drawtube diameter of 1 inch (25 mm) . Indispensable for scient i sts , engineers, schools .
23
K 0 D A K
59 1 74 4
A G S T U T T G A R T - W A N G E N
Prin t ed in Germany Eng\. - MS 2695 - 0161 - Kn
Download
Advertisement
Key features
Automatic exposure
Coupled rangefinder
Large-image viewfinder
Shutter speeds: 1/8 to 1/500 sec
Zone focusing
Film speed setting
Flash synchronization
Time exposures
Depth-of-field scale
Built-in exposure meter
Frequently asked questions
Turn the shutter speed ring until the desired shutter speed is opposite the letter 'A' (automatic) and the setting index. Use faster shutter speeds for fast-moving subjects.
The rangefinder helps you focus accurately by showing a double image of the subject until the camera is focused for the correct distance. The outlines of the double image move together and coincide when in focus.
For quick snapshots, turn the focusing scale to the black dot for close-range subjects or the red dot for remote subjects. This allows you to focus quickly without needing to adjust the lens for each photo.