advertisement
R
Using the LXE
Single-Band Headset
1 Adjusting headset to fit you
Adjust headband to fit
CAREFULLY bend headband to fit you
Cable with quickdisconnect connector
Adjustable headband
Microphone boom with windscreen
To wear earpiece on other ear, swivel boom from one side to the other
2 Positioning microphone
2A 2B 2C
Side of microphone marked TALK must face lips
TALK
In front of mouth
3 Connecting to client unit
One fingerwidth from lips
Lower audio cable
4 Replacing earpiece pads
If earpiece pad gets worn, pull it off and replace it with a new one
Client unit
Copyright © 2010 LXE, Inc. All Rights Reserved.
LXE is a registered trademark of LXE, Inc.
163771-0001 Revision A April 2010
5 Wearing audio cable
UNDER CLOTHING
(recommended)
Leave loop so head can turn
OR
OVER CLOTHING
(with cable in back)
Leave loop so head can turn
Clip to clothing
Clip headset cable to clothing
Clip lower audio cable to clothing
Wear cable inside clothing
Wear cable across back
6 Caring for the headset
Do not wear cable in front of body
!
Attach cables securely to clothing so they let you work without restriction and cannot get tangled in something.
Do not twist microphone too much
Always use windscreen
Carry headset by headband, not boom
Do not bend boom too much
If the microphone stops working, it might be too wet. Try removing the windscreen, shaking moisture out of the microphone, and replacing the windscreen with a dry one
1
7 In harsh environments
Every four hours, or when windscreen gets moist or frozen, replace windscreen
1
4 hrs
2
OR
OR Do not squeeze wet windscreen while on boom
2
3
advertisement