Haier HWM40-187S User Manual
Add to My manuals18 Pages
Haier HWM45-187S is a twin-tub washing machine with a user-friendly control panel, multiple water level options, and a built-in lint filter, making it suitable for various laundry needs.
advertisement
![Haier HWM40-187S User Manual | Manualzz Haier HWM40-187S User Manual | Manualzz](http://s3.manualzz.com/store/data/057454954_1-ccef6e2b8eb44ea88f12cc179836597a-360x466.png)
Twin-tub Washing Machine
This manual is for
HWM40-187S
Please read this manual carefully before using.
Retain it for future reference.
0030803015
Contents
Names of the parts - - - - - - - - - - - - - - - - - - - 1
Safety precautions - - - - - - - - - - - - - - - - - - - 2
Installation and adjustment - - - - - - - - - - - - - 4
Preparation before washing - - - - - - - - - - - 6
The musts in washing - - - - - - - - - - - - - - - - -7
Usage of the detergent - - - - - - - - - - - - - - - 7
Washing sequence - - - - - - - - - - - - - - - - - - -8
Disposal after washing - - - - - - - - - - - - - - - - 11
Trouble-Shooting *Answer to question - - - - - 13
Packing list - - - - - - - - - - - - - - - - - -- - - - - 15
16
Wash selector
Names of the parts
Wash timer
Water-filling entrance
Control panel
Overflow filter
Water level adjusting lever
Lint filter
(installed by user)
Valve cover
Pulsator
Wash tub
Drain hose
Wash tub cover
Base frame
Outer cover of the spin tub
Inner cover of the spin tub
Spin timer
Major frame
Spin tub
Cabinet
Notes: All illustrations in this manual are given for reference only. Your products and
accessories may show differences from these illustrations due to our
continuous improvement.
Meaning and description of the symbols
Warning sign
Forbidding sign
Contents marked with that symbol are related
to the safety of the product and the personal
safety of the users. Please operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal safety of the user.
Contents marked with that symbol are actions
forbidden to perform. Performing of those actions may result in damage of the machine or injure the personal safety of the user.
Please check if the power receptacle has good earthing condition before using to guarantee your safety.
1
Safety precautions
Please insert the power cord into special receptacle with rated voltage. Be sure to use single-phase
three pins receptacle. The earthing
terminal of the receptacle must be
earthed reliably. If possible, please adopt electric leakage protector.
When the machine is normally using, please put the power plug at the location easily to be inserted and extracted by hand. Be sure to pull the plug off when there's power failure, or the machine is being moved, cleaned or when it is idle.
If the power cord is bad, to avoid risk it is required to replace it by the technicians of our special shop or the after-sale service department.
Keep the pin of the power plug clean.
Do not put the machine at damp place like the bathroom . Never wash it with water. Do not place wet laundries on the control panel.
Do not use water hotter than 50 C .
50 C
In case the washing machine is installed on ground with carpet , do not block the ventilation hole with carpet.
Ventilation hole at the bottom of the washing machine
Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning.
Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more.
2
Safety precautions
Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. Take special care of the children.
Do not decompose, repair or alter the machine by yourself.
Do not put any hot or heavy items
( such as the kettle with hot water ) on the washing machine.
Do not wash laundries with volatile materials (such as thinner, petrol etc.).
P etr ol
Thinne r
Handicapped or children without care shall not use the machine.
Keep the machine away from direct sunlight and heat source like the
heater.
Please put down the drain hose before washing , and connect the water inlet pipe properly.
It is suggested to use foamless washing powder.
Please don ′
。 。 t use the washer in the environment below 0 C. If the washer is below 0 C, the washer ′ s water inlet system and draining system will be frozen ,then result in the damaged
。 of the whole machine. If the washer has below 0 C, please be sure to ensure the washer is placed under the room temperature for 2~4 hours and then use .
3
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating
the machine.
Install the lint filter
After opening the package, please take out the lint filter from the document bag, install it to the overflow filter of the wash tub. See to the figure.
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.The height of the drain hose shall be
less than 10cm , or the drainage will
not be smooth enough and cause
incomplete drainage.
2.Do not tramp or press the drain hose.
3.If the drain hose is too long, cut it at mid point.
To make smooth drainage, cut the front end of
the hose slantingly.
<10cm
4.If extra drain hose is needed , please make
separate purchase. The inner diameter of the
extra hose shall not less than 30mm, and the
length shall not exceed 1.5m.
If the extra hose is too long, cut it either at point A or B.
> 30mm
<1.5m
A B
4
How to change the dire ction of the dra in hoses
Figure 1 indicates the ex factory installation position of the drain hose.
Soft item
Extend the drain hose from the side of spin tub
Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading
for the side of the spin tub. (See to Figure 3).
Soft item
Back
Front
Figure 1
Figure 2
Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp.
Extend to the spin tub side
3
2 1
Embed into the groove in turn
Figure 3
Install the water inlet hose; Select the water level
Insert the water inlet hose into the water-filling entrance on the control pane directly.(pull it out to dismantle it)
Water inlet hose
Select water level according to the quantity of the laundries.
Set the water level adjusting lever
to needed line.
Water inlet
Water level indicator
Maximum
Medium
Minimum
Max
Med
Min
5
Preparation before washing
Preparation before washing
1.Connect the water inlet hose.
2.Confirm that the washing machine is earthed
reliably . Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3.Put down the drain hose .
4.Slanting or uneven ground may result in
unstable working or abnormal noise. Please
make the machine stand horizontally.
Pay attention to followings before washing the laundries
Check if the laundries has special requirement on washing
Clear the pocket. Take out the coins, sand, hairpins etc.
Tie the long strips; fasten the buttons; close zippers.
The quantity of the laundries shall not be too large. Stretch and loosen the laundries before putting them in the tub.
When the pulsator is running , the buttons of the laundries may cause noise. For the sake of discretion, please put the laundries with buttons into other laundries.
a. Check if the laundries are applicable for washing with machine.
b. Divide the laundries that are not colorfast from other laundries.
c. Put those laundries difficult to absorb water into water with hand.
d. For those laundries with heavy soil, please first remove the dirt like
mud or dust. For the parts with heavy soil, please apply detergent on
them in advance, which can make it easier to remove the soil.
e. For those laundries that may get lint ball and those with long fur, turn
it over before putting in.
f. Do not put those laundries polluted by chemicals into the washing
machine directly.
6
The musts in washing
The capacity of washing and spinning of the machine refer to the largest weight of the standard laundries under dry condition that can
be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the rated capacity.
The thickness ,size , type of the cloth will influence the actual washing capacity. It is suitable to put in reasonable amount of laundries and the laundries can be turned round in washing for one time washing.
Do not select " Maximum " water level for
laundries less than 1.0kg, so as to avoid splashing of water.
Usage of the detergent
How to use the washing powder
How to use the whitener
Fill water to decided level. Dilute
the whitener with container.
Pour it slowly into the washing tub.
Avoid using whitener on laundries with color or pattern as they
are prone to lose color.
The whitener shall not touch the laundries directly.
Refer to the user's manual for the usage and quantity of the whitener.
For powder whitener, please dissolve it before using.
Direct dissolved in the machine:
1.Fill small quantity of water.
2.Add the powder . Run for 30
seconds to dissolve it completely.
3.Put it in the laundries. Select suitable
water level.
The instant dissolving of the washing
powder:
1.Prepare warm water of 30 C and a
container.
2.Add the powder while stirring to fully
dissolve it.
The powder is more prone to pollute the laundries than the detergent. Therefore please use it with proper quantity.
Dosage of different washing powder is different. Please refer to the instruction of the washing powder for the detail dosage.
7
Washing sequence
Water inlet
Wash timer
(To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer).
OFF
9
WASH TIMER
6
3
STANDARD
Wash selector
(standard current,
strong current)
STRONG
DRAIN
WASH SELECTOR
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
OFF
SPIN TIMER
Wash
1. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 1)
Run washing program for some time to stir and
dissolve the powder completely.
Figure 1
STRONG
STANDARD
2.Put in the laundries. If the water quantity is
insufficient, please add water.
DRAIN
WASH SELECTOR
Figure 2
3.Select the current.
Select the strength of the current according to
the laundries. (Figure 2) 15
OFF
3 3
12
12
4.Select the washing time
Select the washing time according to the laundries.
(Figure 3)
WASH TIMER
STANDARD
9
STRONG
6
6
DRAIN
Figure 3
5.After washing, set the "WASH
SELECTOR" at "DRAIN". (Figure 4).
Figure 4
WASH SELECTOR
8
Rinsing
Rinse with water-filling
1.Put the laundries into the wash tub. Select
suitable current according to the laundries.
2.Adjust the water level
Set the water level with water level adjusting
lever according to the laundries quantity.
Then fill suitable water continuously.
3.Rinse
Adjust the wash timer to 5-7 minutes to do
rinsing.
(Repeat the midway spinning and
rinsing with stored water for 2-3 times)
Rinse with stored water
1. Put the laundries into the wash tub. Select suitable current according to
the laundries.
2. Fill water to preset water level.
3. Rinse
Adjust the wash timer to 2-3 minutes to do rinsing.
When the laundries quantity is a few , please use "Standard" current.
If you use "Strong" current, it may splash.
9
Spinning
1.
Put the laundries into the spin tub evenly and smoothly.
2.
Spin
Please put in the gland properly even if the
laundries quantity is small.
Push Gland
Push
Proper The laundries are slanting
Proper No gland
(2) Close the inner and outer cover of the spin tub.
Outer cover of
The spin tub
Inner cover of
The spin tub
(3) Spin for 1-2 minutes.
During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries.
In spinning, it will pause the work if you open the outer cover of the spin
tub. Close it to resume the spinning.
To do spinning and draining
together, please first do spinning for around 1 minute,
then do draining . Otherwise
the spinning will stop owing to too much water stored in the spin tub.
10
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter and overflow filter in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Cleaning the lint filter
The lint filter must be used during washing.
It must be cleaned in time after each using.
1. Take off the lint filter
Put hand at the indicated position.
Push down to take it off. ( See to
Figure 1)
2. Clean the lint
Put it in water and clean while it is
still wet.(See to Figure 2)
Figure 1
3. Install the lint filter
After cleaning, insert the bottom
of the lint filter ( marked with
"down side") into the overflow filter ,
then push the upper part of the
filter in ( marked with " up side ").
(See to Figure 3)
Figure 2
Cleaning the overflow filter
1 、
Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months.
Take off the overflow filter.
Elastic fixing claw
As indicated in the figure, nip the elastic fixing
claw and pull it to the direction of the arrow to
take it off.
Figure 3
11
Cleaning the overflow filter
2. Take off the corrugation pipe.
Dismantle the upper part of the
corrugation pipe inside the
overflow filter ( as indicated in
Figure 1).
3. Cleaning the overflow filter
Clean the lint around the filter
and flush with tap water.
4. Install the overflow filter.
(1).Install the corrugation pipe.
(2).Insert the mounting plate at
the bottom of the filter into
the valve cover.
(3).Hang up the hook at the left
upper side.
(4).Push the upper part in as
indicated in Figure 2.
Hook
Water level adjusting lever
Corrugation
Pipe
Figure 1
Figure 2
Disposal of the complete unit
Wipe the complete unit with soft cloth twisted dry.
Wipe with neutral detergent if too dirty.
Do not wash it directly by water.
Alcohol
Petrol Thinner
After washing, dismount the water inlet hose.
Do not store water in the tub for long period. Discharge the water immediately after each using.
Pull off the power plug and hang up the power cord.
Hang up the drain hose.
Wipe off the water drops on the surface and inside the tub with clean soft cloth.
Open the cover of the wash tub and the inner/outer cover of the spin tub for some time (about one hour), then close them.
12
Trouble-shooting Answer to question
If the laundries fall to the outer side of the spin tub
If the laundries fall to the outer side of the spin tub,please
contact
the after-sales service department.
When the remained water is frozen
Prevent the freezing (be sure to discharge the water completely after using)
After complete draining, set the "WASH SELECTOR" at "STRONG" or
"STANDARD". If it is set at "DRAIN", it will be rather difficult for the frozen
water to melt.
Below 50 c
2~3L
When the water is frozen
Pour hot water below 50 ℃ into the wash tub
to soak it completely. Then turn the pulsator
with hands gently. Please confirm the drainage
can work normally before next using.
13
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending
it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself.
Phenomena The reason
The machine does
not act.
Is there power failure?
Is the power plug loose?
Is the pulsator twisted by foreign materials?
The draining does not work
There's abnormal sound during washing
There's abnormal sound and violent
vibration during spinning
Is the drain hose frozen?
Is the drain hose blocked by foreign material?
Are there laundries falling to the outer side of the spin tub?
Are there hair pin, coins or metal items brought inside t he tub?
Is the machine slanting?
Is the gland pressed evenly?
Are there laundries falling to the outer side ofthe spin tub?
Are the laundries in spin tub too much?
There may be some water flowing out of the drain hose in the first use of the machine.
It is the water remained in the factory inspection of performance.
14
Packing list
Name
User's manual
Water inlet hose
Lint filter
Gland
Twin-tub washing machine
Quantity
One piece
One piece
One piece
One piece
One set
15
Specification
Water level/Water quantity (L) (about)
Injection pressure(MPa )
Washing capacity(kg)
Spinning capacity(kg)
Maximum/33.5 Medium/27 Minimum/22.5
0.02
~ 0.2
4.0
3.5
16
advertisement
Related manuals
Frequently Answers and Questions
What safety precautions should be taken when using the washing machine?
How do I install the lint filter?
What are the steps for changing the direction of the drain hoses?
How do I prepare the washing machine before washing?
What factors influence the actual washing capacity of the machine?
How do I use the whitener?
How do I use the washing powder?
What is the washing sequence for the Haier HWM45-187S?
advertisement