LA-1500BT

LA-2300BT

SINGLE DIN RECEIVERS

S O L O R E C E P T O R D E L E S T R U E N D O

Owners

Manual

Introduction

Dear Customer,

Congratulations on your purchase. At Lightning Audio we are pleased that you chose our product.

For maximum performance we recommend you have your new

Lightning Audio product installed by an Authorized Lightning

Audio Dealer. Please read your warranty and retain your receipt and original carton for possible future use.

Visit our web site for the latest information on all Lightning Audio products; www.lightningaudio.com or, in the U.S. call 1-888-881-8186 or FAX 1-800-398-3985

Table of Contents .

2 Introduction

3 Specifications

4-5 Design Features

6-7 Installation

Contents

Installation Considerations

Mounting Locations

Wiring

8-11 Operation

Basic

Radio

USB/SD Card/CD

Bluetooth TM Pairing

Remote Control

Android TM App

11 Troubleshooting

12 Limited Warranty Information

If, after reading your manual, you still have questions regarding this product, we recommend that you see your Lightning Audio dealer. If you need further assistance, you can call us direct at 1-800-669-9899. Be sure to have your serial number, model number and date of purchase available when you call.

PRACTICE SAFE SOUND

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. High powered auto sound systems may produce sound pressure levels well over

130dB. Use common sense and practice safe sound.

Safety

This symbol with “WARNING” is intended to alert the user to the presence of important instructions. Failure to heed the instructions will result in severe injury or death.

This symbol with “CAUTION” is intended to alert the user to the presence of important instructions. Failure to heed the instructions can result in injury or unit damage.

s To prevent injury and damage to the unit, please read and follow the instructions in this manual. We want you to enjoy this system, not get a headache.

s If you feel unsure about installing this system yourself, have it installed by a qualified Lightning Audio technician.

s Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide more reasonable protection against harmful interference in a residential installation.

Operation is subjected to the following two conditions: (1) This device may not cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one of the following measures: s Reorient or relocate the receiving antenna.

s Increase the separation between the equipment and receiver.

s Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. s Consult the dealer or an experience radio/TV technician for help.

2

General

Supply Voltage:

Current Consumption:

Power Output:

Number of Channels:

Unit Dimensions:

FM Section

Frequency Range:

Effective Sensitivity:

IF Frequency:

AM Section

Frequency Range:

Effective Sensitivity:

IF Frequency:

RCA Line Out

Output:

Quantity:

MMC/SD or USB Playback

System:

Frequency Characteristics:

Signal to Noise:

Compatibility

LA-1500BT

DC 12V

Max. 10A

200 watts (50x4)

4-Stereo

7”(W)x4”(D)x2”(H)

87.5MHz-107.9MHz US

87.5MHz-108 EU

40dB

10.7MHz

530KHz-1710KHz US

522KHz-1620KHz EU

40dB

450KHz

1.2V @ Max.

2 Pair + 1 Subwoofer

MP3/WMA Audio System

20Hz-100Hz <=5dB

10KHz-20KHz <=5dB

50dB (1KHz)

LA-2300BT

DC 12V

Max. 10A

200 watts (50x4)

4-Stereo

7”(W)x4”(D)x2”(H)

87.5MHz-107.9MHz US

87.5MHz-108 EU

40dB

10.7MHz

530KHz-1710KHz US

522KHz-1620KHz EU

40dB

450KHz

1.2V @ Max.

2 Pair + 1 Subwoofer

MP3/WMA Audio System

20Hz-100Hz <=5dB

10KHz-20KHz <=5dB

50dB (1KHz)

6SHFLÆFDWLRQV

Internet Radio available via

Bluetooth wireless technology.

Note: Reception and receiving is device dependent.

Internet Radio available via

Bluetooth wireless technology.

Note: Reception and receiving is device dependent.

©2013 Rockford Corporation. All Rights Reserved. LIGHTNING AUDIO and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. Android is a trademark of Google Inc. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rockford Corporation is under license. All other trademarks are the property of their respective owners. Specifications subject to change without notice.

3

'HVLJQ)HDWXUHV)URQW

2/INTRO button

1/PLAY/PAUSE button

Built in MIC

POWER/MUTE button

3/REPEAT button

4/RANDOM button

5/-10 button

1 2

INT

MIC

PWR

MUTE

3

RPT

4

RDM

5

-10

6

+10

REV button

FWD button

LA-1500BT

VOL

SEL

VOLUME/SELECT button

IR remote sensor

OPEN

BAND MODE

OPEN button

APS

USB input

AUX

AUX input

APS/END button

MODE button

SEND/BAND button

SD Card slot

LA-2300BT

SD

SD Card slot

RESET

LED indicator

RESET button

DISC slot

EJECT button

RESET

LED indicator

RESET button

illus.-1.1

4

'HVLJQ)HDWXUHV%DFN

LA-1500BT

SOCKET A

SOCKET B

Wiring harnesses included

FR

FL

RCA out

RR

RL

ANTENNA input

Bluetooth antenna

External MIC line in

Subwoofer line out

LA-2300BT

Bluetooth antenna

External MIC line in

Subwoofer line out

FL

FR

RCA out

RL

RR

ANTENNA input

Wiring harnesses included

SOCKET A

SOCKET B illus.-1.2

5

,QVWDOODWLRQ

Contents s Source Unit s Remote Control s Metal Mounting Sleeve s Speaker Harness s Power Harness s s s s

External Mic

Chassis Keys

Mounting Backstrap

Mounting Screws

Installation Considerations

The following is a list of tools needed for installation: s Volt/Ohm Meter s Wire strippers s Wire crimpers s Wire cutters s #2 Phillips screwdriver s Battery post wrench s Hand held drill w/assorted bits s Assorted connectors s 1/8” Dia. Heatshrink Tubing s Soldering Iron s Solder s Heatgun

This section focuses on some of the vehicle considerations for installing your new source unit. Pre-planning your system layout and best wiring routes will save installation time. When deciding on the layout of your new system, be sure that each component will be easily accessible for making adjustments.

If you feel unsure about installing this system yourself, have it installed by a qualified Lightning Audio technician.

Before installation, disconnect the battery negative (-) terminal to prevent damage to the unit, fire and/or possible injury.

Before beginning any installation, follow these simple rules:

1. Be sure to carefully read and understand the instructions before attempting to install the unit.

2. For safety, disconnect the negative lead from the battery prior to beginning the installation.

3. For easier assembly, we suggest you run all wires prior to mounting your unit in place.

4. Route all of the RCA cables close together and away from any high current wires.

5. Use high quality connectors for a reliable installation and to minimize signal or power loss.

6. Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7. Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8. Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9. ALWAYS protect the battery and electrical system from damage with proper fusing. Install the appropriate fuse holder and fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10. When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground connection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

Seatbelt bolts should never be used for connecting to ground.

6

Mounting Locations

The mounting position of your source unit will have a great effect on the performance of your in-dash Media Player. The source unit can be installed in a wide range of operating locations. However, care should be taken to ensure optimum performance.

Instrument Panel

Mounting the source unit in the instrument panel provides optimum access. The source unit should be securely mounted using the “Standard

Mount” or “ISO-DIN Mount” method to ensure optimum Media Player performance.

Center Console

Mounting the source unit in the center console also provides optimum access. Be sure the installation does not interfere with the operation of the gear shift or parking brake.

Glove Box

Mounting the source unit in the glove box is adequate, but does not provide easy access. Glove box mounting should only be done if “Instrument

Panel” or ”Center Console,” mounting is not acceptable (i.e., maintaining integrity of older vehicles with metal dashboards.)

Under Dash

Mounting the source unit under the dash is adequate, but does not provide easy access. Under dash mounting should only be done if “Instrument

Panel,” ”Center Console” or ”Glove Box” mounting is not acceptable.

Mount the source unit off to the side of the driver’s area to reduce interference with the parking brake, gear shift, or operating pedals.

NOTE: The source unit should have a mounting angle within ±20° from horizontal.

Engine Compartment

Never mount the source unit in the engine compartment. Mounting the source unit in the engine compartment will void your warranty.

Before installing, remove the top screws in the unit. (LA-2300BT only)

Metal Support Strap

Unit Chassis

Fixed Faceplate

Front Panel

To remove the unit from the metal mounting sleeve, insert the two keys supplied into the left and right side slots of the chassis at the same time.

Then pull the chassis out of the metal mounting sleeve as shown.

,QVWDOODWLRQ

Metal Mounting Sleeve

Bend tabs against dashboard with a screwdriver.

Plastic Trim Ring illus.-2.1

Included Wiring Harnesses

CONNECTOR A CONNECTOR B

YELLOW (Memory +12V)

BLUE (Remote Turn On)

RED (+12V to Ignition)

BLACK (Ground)

GREEN/BLK (R.L. Speaker)

GREEN (R.L. Speaker)

WHITE/BLK (F.L. Speaker)

WHITE (F.L. Speaker)

GRAY/BLK (F.R. Speaker)

GRAY (F.R. Speaker)

VIOLET/BLK (R.R. Speaker)

VIOLET (R.R. Speaker)

7 illus.-1.2

2SHUDWLRQ

Basic Operation:

To turn the unit on/off

When the unit power is Off, it may be switched On by pressing any button except the OPEN button. When the unit is On, press and hold the POWER button for more than 0.5 seconds, to switch the power off.

To select function mode

Press the MODE button to change function mode as follows: -->TUNER --> CD (if equipped)-->SD/MMC (after inserting SD card) -->USB (after inserting USB stick)

--> BT AUDIO --> AUX -->

When there is no media (CD/USB/SD/BT), those modes will be skipped.

To adjust the volume level

Rotate VOL knob left or right to desired volume level.

To mute or resume sound

Press the MUTE button to eliminate or resume sound immediately during playback.

To resume the sound immediately, you can also press SEL button or rotate VOL knob.

To set sound mode

Press SEL button shortly and repeatedly to select mode of VOL(volume), BASS,

MID, TRE, BAL(balance) and FAD(fader) in the sequence and circulation. In each mode, the waiting time is about 5 seconds, and when the waiting time is over, it will return to the last display mode. After selecting a sound mode, use volume control to set level of the selected sound mode.

To set menu

Press SEL button and hold for more than 2 seconds to turn on INVOL mode, then press SEL button shortly and repeatedly to select CLOCK MODE (adjust clock),

BEEP ALL/2ND/OFF, TAVOL, EON ON/OFF, REG ON/OFF, AF ON/OFF, TA ON/

OFF,EQ ON/OFF, LOUD ON/OFF, LOC ON/OFF(in radio mode), STEREO/MONO(in radio mode), S-WF ON/OFF, AREA(USA/EUR) in radio mode). After selecting a desired item, use volume control to set.

INVOL mode

This is the initial preset volume the unit will be played a turn on. Rotate VOL knob left to right for desired level 0-30.

CLOCK (Adjusting Time)

When this mode is selected, rotate VOL knob left or right to adjust time. You will have to scroll thru the hour setting to change AM/PM value.

BEEP mode

ALL mode: The beep is generated when any key is pressed.

2ND mode: The beep is generated when the first mode option key is pressed.

OFF mode: The beep sound is disabled.

TAVOL mode (RDS only)

The volume level for Traffic Announcements when TA mode is ON. Rotate VOL knob left to right for desired level 0-30.

EON mode (RDS only)

Enhanced Other Networks. When on, this allows the receiver to monitor other networks or stations for traffic programmes, and automatically temporarily tune into that station.

REG mode (RDS only)

This is mainly used in countries where national broadcasters run “region-specific” programming. This functionality allows the user to “lock-down” the set to their current region or let the radio tune into other region-specific programming as they move into the other region.

8

AF mode (RDS only)

Alternative Frequencies. This allows the receiver to re-tune to a different frequency providing the same station when the first signal becomes too weak.

TA mode (RDS only)

Traffic Announcements. When this feature in ON, the unit will recieve traffic bulletins.

EQ mode

The unit has predefined EQ settings to adjust your levels to compliment the music being played. (OFF/POP/ROCK/CLASSIC/FLAT) When EQ is set to OFF, user settings are used.

Loud mode

This feature boosts low frequencies. It is useful at low volumes.

LOC mode (in radio mode)

Two levels of sensitivity for tuner searching, local and distant.

STEREO/MONO mode (in radio mode)

Adjust the unit to play in either STEREO or MONO.

S--WF mode

Activates the Subwoofer ouput line on the unit.

AREA mode (in radio mode)

Select to USA or EUR depending on what country you are in.

To remove front control panel

Press OPEN button to release front control panel from unit chassis. When front control panel is removed, the LED indicator on the front flashes.

To reset unit

Before operating the unit for the first time, or after replacing the car battery or changing the connections; you must reset the unit.

To reset the unit, remove the front control panel, then press RESET button with a pen or paper clip. This operation will erase clock setting and stored contents.

Radio Operation

To select radio band

Pressing the BAND button briefly and repeatedly to select the desired radio band.

The sequence for the radio bands is as follows:

-->FM1-->FM2-->FM3-->AM1-->AM2-->

To search for a radio station manually or automatically

Press and hold the >>| button to activate MANUAL searching mode.

In MANUAL mode: Press the >>| or |<< button briefly to manual tune up/down for the desired radio station frequency step by step.

In AUTO mode: Press the >>| or |<< button, to automatically tune up/down for the radio station frequency. (If in MANUAL mode and without further operation, the unit will change to AUTO mode a few seconds later.)

To store current station or turn on a preset one

1) Press one of the 6 number buttons and hold for more than 1 second to store the current station in the preset memory bank of the number button for the current band. In this way the unit can store 30 preset stations.

2) Press one of the 6 number buttons briefly to turn on the preset station stored in the preset memory bank of the number button for the current band.

3). To scan for each preset station or auto search for the strongest stations

A) When pressing and holding the APS button for more than 1 second, the radio searches from the current frequency and checks the signal strength level until the 6 strongest stations are found. Then the 6 strongest stations are preset to the corresponding preset memory numbered bank. The auto-storage operation

is implemented in the each selected band. When the auto-storage operation is finished, the radio executes Preset scan.

B) When pressing the APS button or A.P button briefly, the radio searches for each preset station in the current band and holds at that preset station for 5 seconds while releasing mute, and then searches again.

4. To search for stations with a PTY (PROGRAMTYPE) program (RDS only)

Press and hold MODE on main unit to select one of PTY programs such as:

POP M- - NEWS-- off. While selecting POP M or NEWS, pressing one of the 6 preset buttons briefly and repeatedly can select your desired PTY program as described in preset buttons. When turning on a PTY program, the PTY program and PTY word is flashed on LCD. After selecting a desired PTY programand no operation for 2 seconds, it will search for the station of the PTY program. During 1 loop, if the desired station of the PTY programs not found, PTY NONE is displayed, then returns to previous normal radio and PTY icon disappear

* When PTY mode is on, the 6 number buttons are shared as follows:

PTY music group -----------PTY speech group

1. POP M, ROCK M 1. NEWS, AFFAIRS, INFO

2. EASY M, LIGHT M

3. CLASSICS, OTHER M

4. JAZZ, COUNTRY

2. SPORT, EDUCATE, DRAMA

3. CULTURE, SCIENCE, VARIED

4. WEATHER, FINANCE, CHILDREN

5. NATION M, OLDIES

6. FOLK M

5. SOCIAL, RELIGION, PHONE IN

6. TRAVEL, LEISURE, DOCUMENT

AF [ALTERNATIVE FREQUENCIES] mode (RDS only)

When pressed briefly, AF switching mode is selected and the state of AF switching mode is displayed by AF segment in display.

Segment off: AF switching mode off.

Segment on: AF switching mode on, and has RDS information.

Segment flashing: AF switching mode on, but RDS information is not received yet.

When AF switching mode is selected, the radio checks the signal strength of AF all the time. The interval of checking time of each AFs depends on the signal strength of the current station, from a few minutes for strong station to a few seconds for a weak station. Every time that a new AF is stronger than the current station, it switches over to that frequency for a very short time, and the NEW FREQUENCY is displayed for 1-2 seconds. Because the mute time of AF switching or checking time is very short, it is almost inaudible in case of normal program. During FM mode, when AF is on, SEEK, (SCAN), AUTO-MEMORY function can only receive and save

RDS program.

TA [TRAFFIC ANNOUNCEMENT] mode (RDS only)

When TA mode is on (TA is displayed on LCD), it will begin to seek TA station and

TA SEEK will be displayed on LCD.

When traffic announcement is transmitted:

1). If the unit is in SD, USB mode, it will switch to radio mode temporarily.

2). If volume level is below 20, volume level is raised to 20, and returns to its previous mode and volume level when the traffic announcement is over. If volume is adjusted during traffic announcement, only the traffic announcement volume is valid.

* When TA mode is on, SEEK, AUTO MEMORY function can be received or saved only when traffic program identification code has been received.

USB/SD/CD(if equipped) OPERATION:

1. To insert or pull out a CD or SD card or USB stick

When needing to playback CD/SD or USB music, remove front control panel or open the cover of USB port, insert CD or SD card or USB stick into CD slot or SD slot or USB port. Then the playing mode will be changed into CD or SD or USB mode and display CD or SD or USB on LCD (When CD, SD card and USB stick are

2SHUDWLRQ

both inserted into their slot or socket, the playing mode will be changed into the mode of the latter one), and then play the first track of CD or SD or USB.

2. To select next or previous track to play

Press the >>| button briefly to play next track.

Press the |<< button briefly to play the current track from the beginning of it if the playing time is more than 2 seconds.

Press the |<< button briefly to play the previous track if the playing time is less than 2 seconds.

3. To play fast forward or backward

Press and hold >>| or |<< button to play fast forward or backward.

4. To play previous or next 10th track

Press 5/-10 or 6/+10 button to play previous or next 10th track.

5. How to use 1/ >|| /TOP button

During playback, press 1/ >|| /TOP button to pause playback. When in pause mode, press 1/ >|| /TOP button to play again.

Press and hold 1/>||TOP button to select the first track for playback.

6. To scan tracks

During playback, press INT button briefly to play the first 10 seconds of each track, press INT button again to cancel INT function and retain playing the track currently selected.

7. To repeat track(s)

During playback, press RPT button briefly to play the current track repeatedly, and the LCD will display RPT ONE.

Press and hold the RPT button to play the tracks in the Album repeatedly, and the

LCD will display D-RPT.

Press RPT button again to cancel RPT function, and the LCD will display RPT OFF.

8. To play tracks in random

During playback, press RDM button briefly to play all tracks in random. Press it again to cancel RDM function.

9. To quickly select a track to play

Press APS or A.P button repeatedly to select TRACK SEARCH, FIRST CHARACTER

SEARCH or DIRECTORY SEARCH mode.

1) In TRACK SEARCH mode , the LCD will display TRK 000 and flash the biggest digit 0 that the USB stick or SD card contains. Then use volume control to enter a number of the flashing digit from 0 ~ 9. Then press SEL button to confirm the number and flash next smaller digit 0. With the same means, enter the number of the other flashing digit. After finishing entering the number of all flashing digits, press BAND button to play the track of the selected serial number.

2) In FIRST CHARACTER SEARCH mode, the LCD will display A--SEARCH, If there are some files names with the first characters are A , SEARCH will change into the first file name with first character is A, by the order of A~Z and 0~9; otherwise, it will change into NONE.

Use volume control to select files first character by the order of A~Z and 0~9. Then press >>| or |<< button to select one file its first characters as the selected one.

Finally press BAND button to play the selected file.

3) In DIRECTORY SEARCH mode , the LCD will display the root folder (if there is no root folder, it will found a root folder named D-ROOT). Then use volume control to select your desired folder and then press BAND button to enter the folder and play the first track in the folder, and press >>| / |<< button to play your desired track in the folder.

9

2SHUDWLRQ

Bluetooth TM Pairing

1. Pairing

Turn on the Bluetooth mode of your mobile phone, then select the function for

Finding Bluetooth Device. After finding, it will show the name of Bluetooth

Device “LIGHTNING AUDIO”; once found, select it and then it will asks you to input a password/PIN. Input “0000” , then the LCD of the car audio system will display

CONNECT.

2. Disconnection

A) Using the mobile phone to disconnect

1) When connected, find the paired Bluetooth device, then press the disconnection button to disconnect.

B) When turning the unit on (after Acc of the car was switched off ), the unit will search for a mobile phone, pair and connect. This will take about 10-15 seconds.

Note: When connected, the mobile phone transfers to the car audio player whenever dialling takes place; the mobile phone transfers to the car audio player whenever receiving a call.

3. Dialing options when connected

A) Dial with mobile phone directly.

B) To dial with remote control use the following procedures:

1) Briefly press SEND button.

2) Input telephone number with number buttons 0-9.

3) Briefly press END button to cancel the incorrectly entered number, if necessary.

4) Briefly press SEND to start dialing. The talking time will appear on LCD if dialling is successful and is received.

C) Redial - Press SEND button on remote control twice, it will show DIALING on

LCD and dial the number. After dialing is completed, talk time will display.

4. Accept/ Reject/ End Call

A) To accept the call, press the SEND button.

B) To reject the call, press the END button.

C) To end the call, press the END button.

Note: When call is ringing, CALLING appears along with then the phone number.

While talking, talk time appears.

5. Talking volume level setting

While talking, use volume control to adjust volume level. This volume level can not be saved.

6. To transfer the audio of a file played by the Mobile Phone to the Car

Audio Player

If the mobile phone supports A2DP and is capable of playing audio files; when the Mobile Phone plays an audio file, the playback will be transferred to the Car

Audio Player (For some Mobile Phones, you must first select Play by Bluetooth ).

In A2DP mode, if the Bluetooth device of the Mobile Phone supports AVRCP, the functions of the >>| , |<< and PLAY/PAUSE buttons are the same as in media mode

(no fast forward/backward functions for the >>| / |<< buttons). The other buttons normally available in media mode are not available.

Android App (LA-1500BT & LA-2300BT)

Another way to control the unit instead of using the included remote, you can use your Android phone. You will need to install the “RadioView” app onto your mobile device. The app will need to be downloaded from Google Play. Do a search for

“RadioView” and proceed to download. Install per the app instructions.

Remote Control

POWER button

A.P (Auto Program) button

SCN (Scan) button

CLK (Clock) button

BND (Band) button

MODE button

PLAY/PAUSE button

INT (Intro) button

“ * ” button

MUTE button

T-M button

POWER

UP

AP

SCN CLK

SEL

DN

AF

MODE

TOP

1

5

*

MUTE

6

9

BND

INT

2

T-M

7

0

PTY

RPT

3

TA

RDM

4

8

#

+

/

-

button

SEL (Select) button

FWD/BACK, UP/DOWN button

AF (Alt. Freq.) button

PTY (Program Type) button

TA (Traffic Announcement) button

RDM (Random) button

RPT (Repeat) button

NUMBER buttons

“ # ” button

Call SEND button

Call END button

Load/unloading battery of remote control

+ Side Up

B

A

Fig. 1 Fig. 2 Fig. 3

1. Please remove insulating sheet out of remote control before use. Pull out insulating sheet in the direction as per Fig. 1.

2. When changing battery for remote control, first pull the movable block hold in the direction as indicated in Fig. 2, Arrow A. Then pull the battery holder out from the remote control in the direction as indicated in Fig.2, Arrow B.

3. Replace the old battery by a new battery with (+) polarity side upward. Then return the battery holder to the remote control by pressing the battery holder.

Please see Fig.3.

Improper use of battery may cause overheating or explosion. Which may result injury or fire.

Battery leakage may cause damage to the remote control(Battery Life: 6 months with normal use in normal room temperature).

s Do not short the battery.

s Do not throw the battery into the fire.

s To avoid the risk of accident, keep the battery out of reach of children.

10

7URXEOHVKRRWLQJ

Symptom

Source unit does not turn on.

Unit resets itself when engine is off

Diagnosis Remedy

Basic

Blown fuse

Vehicle’s ignition is off

Check fuse of the unit, replace with correct rating.

If connect following the instructions, the unit will not operate with ignition off.

Voltage applied to Red and Yellow wires is not between 10.8 & 16 volts or there is not voltage present

Unit is not properly grounded Check wiring and repair as necessary

Incorrect connection between ACC and battery Check wiring and repair as necessary

Radio

Check battery, connection and fuses and repair or replace as necessary. If voltage is above +16 volts, have the electrical system inspected by and authorized car service center

Tuner fails to tune any stations

No antenna or disconnected or open connection in cable

Unable to tune stations in seek mode You are in a weak signal area

USB Devices

USB device cannot be inserted

The USB device has been inserted with wrong direction

The USB device connector is broken

The USB device is damaged

USB device is not recognized

Connectors are loose

Check all connections and repair as necessary

Make sure the tuner LOC mode is off

Reversing the connection direction of the USB device, try it again

Replace with a new USB device

Disconnect USB device an reconnect. If the device is still not recognized, try replacing with a different USB device

No sound heard with the display “No

File” shown

No MP3/WMA files are not stored on the USB device

Store these files properly on the USB device

Sound skips or is noisy MP3/WMA files are not connected properly Use MP3/WMA files encoded properly

MP3 is not playing back

CD skips excessively

Sound skips or is noisy; unable to fast forward or backward CD

CD Insertion not possible

MP3

Writing error occurred. The MP3 format is not compatible.

Make sure MP3 has been written in a supported format

CD Player (LA-2300BT only)

Source unit mounted at an incorrect angle

Check mounting angle of source unit (Mount within

+ or - 20 degrees from horizontal) and repair as necessary.

Source unit not secured properly (Standard

Mount)

Check tightness of installation sleeve and back strap; repair or replace as necessary.

Source unit not secured properly (ISO Mount)

Compact disc is dirty

Compact disc is heavily scratched or warped

A CD is already in the CD player

Check tightness of mounting screws and repair or replace as necessary.

Clean disc with soft cloth

Replace with new disc without scratches

Press the eject button to remove disc

11

/LPLWHG:DUUDQW\6WDWHPHQW

Lightning Audio offers a limited warranty on products on the following terms:

Length of Warranty

Headunits - One year replacement warranty from date of original purchase - requires proof of purchase.

Speakers - One year replacement warranty from date of original purchase - requires proof of purchase.

Amplifier s - One year replacement warranty from date of original purchase - requires proof of purchase.

What is Covered

This warranty applies only to Lightning Audio products sold to consumers by an authorized Lightning Audio Dealer in the United States of America. Products purchased by consumers from an authorized Lightning Audio Dealer located outside of the USA are covered by the authorized Lightning Audio Distributor for the country in which the products were purchased.

Who is Covered

This warranty covers only the original purchaser of Lightning Audio product purchased from an authorized Lightning Audio Dealer in the

United States. In order to receive service, the purchaser must provide Lightning Audio with a dated copy of the sales receipt stating the customer name, dealer name and product(s) purchased. Products found to be defective during the warranty period will be replaced (with a product deemed to be equivalent at Lightning Audio’s sole discretion) by Lightning Audio.

What is Not Covered

1. Damage caused by accident, misuse, abuse, improper installation or operation, water or moisture, excessive heat, theft, or shipping

2.

3.

Any cost or expense related to the removal or reinstallation of product

Items previously repaired, serviced or modified by an unauthorized service center

4.

5.

6.

7.

Any product which has had the serial number defaced, altered, or removed

Subsequent damage to other components

Any product purchased outside the U.S.

Any product not purchased from an authorized Lightning Audio Dealer

Limit on Implied Warranties

Any implied warranties of fitness for use and merchantability are limited in duration to the period of the express warranty set forth above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for

Lightning Audio any other liability in connection with the sale of the product.

How to Obtain Service

Defective products should be returned to your local authorized Lightning Audio Dealer for warranty service or, you may call 1-888-881-8186 for Lightning Audio customer service. You must obtain an RA# (Return Authorization number) prior to returning any product to Lightning

Audio. Return Authorizations are valid for 30 days. You are responsible for the shipment of defective product to Lightning Audio and you

MUST include valid proof of purchase. Mark your RA# clearly on outside of your shipping carton. Products received without a valid RA# will be refused and returned to sender at sender’s expense.

12

1)LHVWD%OYG6XLWH‡*LOEHUW$UL]RQD86$‡

ZZZOLJKWQLQJDXGLRFRP