Concord Camera Eye-Q Duo LCD Instruction Manual
Concord Camera Eye-Q Duo LCD is a versatile camera with a 1.6" color LCD, USB and TV connectivity, and a built-in flash. It features multiple shooting modes, including video clips, self-timer, and a 2x digital zoom. With its 1.3-megapixel resolution and removable MultiMediaCard support, you can capture and store high-quality images and videos. Enjoy easy photo viewing and editing with the included ArcSoft PhotoImpression software.
Advertisement
Advertisement
Duo Manual (510939-02) 8/7/02 12:43 pm Page 1
ENGLISH
CONGRATULATIONS
Congratulations on the purchase of your new camera. Your camera has been carefully engineered and manufactured to give you dependable operation. Read this manual before operating the camera to become more familiar with it.
This manual has been written and formatted with depth and detail so that you can easily follow the instructions to maximize the features of your camera.
1
Duo Manual (510939-02) 8/7/02 12:43 pm Page 2
Table of Contents
Important Information ......................................................................................4
Camera Features ..............................................................................................6
System Requirements ......................................................................................6
1. The Camera
Overview of your Concord Eye-Q Duo LCD Camera ........................................7
Loading the Batteries ......................................................................................8
Turning the Camera On and Off ......................................................................9
LCD Menu Screens ........................................................................................10
LCD Status Messsages....................................................................................12
Turning the LCD On and Off ..........................................................................13
Camera Ready LED Status ..............................................................................13
Camera Memory ..............................................................................................14
2. Camera Mode
Taking Images ................................................................................................16
Main Menu ......................................................................................................16
Mode Select ..............................................................................................17
Video Clips ............................................................................................17
Self-timer ................................................................................................18
Quality........................................................................................................
19
Flash ..........................................................................................................20
WB (White Balance) ..................................................................................21
Brightness ................................................................................................22
Setup ........................................................................................................
23
2X Digital Zoom ............................................................................................26
3. Review Mode
2X Enlargement ..............................................................................................27
Viewing Video Clips ......................................................................................27
Main Menu ....................................................................................................28
Delete ........................................................................................................
28
Thumbnail ..................................................................................................30
Brightness ................................................................................................30
4. Software Installation
Installing the Camera Drivers and ArcSoft Applications ................................31
2
Duo Manual (510939-02) 8/7/02 12:43 pm Page 3
5. Transferring Photos to the Computer
Connecting the Camera to the Computer ......................................................32
WDM/TWAIN Drivers (PC) ..........................................................................33
Mass Storage Mode (HDD) ......................................................................34
ArcSoft PhotoImpression ........................................................................
36
6. Special Features
PC Video Clips................................................................................................37
Web Camera ..................................................................................................38
TV Mode ........................................................................................................39
Interchangeable Face Plates ..........................................................................42
7. Camera Maintenance
Cleaning the Eye-Q Duo LCD..........................................................................43
8. Tips and Troubleshooting ..............................................................................44
9. Getting Help ..................................................................................................48
10. Camera Specifications ....................................................................................49
11. Warranty Information ....................................................................................52
3
Duo Manual (510939-02) 8/7/02 12:43 pm Page 4
IMPORTANT INFORMATION
FCC INFORMATION
FCC WARNING: This equipment meets the limits for a Class B digital device, pursuant to Part 15 of FCC rules. Only the cable supplied with the camera should be used. Operation with other cables is likely to result in interference to radio and TV reception and could void the user’s authorization to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.
Tested To Comply
With FCC Standards for HOME OR OFFICE USE
Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate this equipment.
USER INFORMATION
NOTE: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
4
Duo Manual (510939-02) 8/7/02 12:43 pm Page 5
VCCI INFORMATION
This is a Class B product, to be used in a domestic environment, based on the
Technical Requirement of the Voluntary Control Council for Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.
Please install and use the equipment according to the instruction manual.
PRECAUTIONS
Be sure to observe the following precautions when using the camera:
• Do not open the case of the camera or attempt your own repairs. Always leave this service to authorized repair facilities.
• Keep the camera away from water and other liquids, and never let it get wet. Never use outdoors when it is raining or snowing.
• Should foreign matter or water get into the unit, immediately turn the power off and contact your local authorized service center.
• Physical damage and malfunction of this unit can cause the image data stored in its memory to be deleted. Be sure to always keep backup copies of data by transferring them to a personal computer.
• Under the environment with electrostatic discharge, the camera may malfunction and require the user to reset the camera.
• Do not leave the camera in places subject to extremely high temperatures, such as in a closed vehicle or in direct sunlight.
• Remove the battery when camera is not used for long periods of time.
• Use LR6 AA batteries only.
• Dispose of the batteries in a manner that complies with applicable laws.
• Do not place the camera in unstable locations where the camera may fall and be damaged.
• Do not press on the LCD or lens.
• Do not unplug the camera from the TV or computer while the camera is in operation; otherwise, the memory may be corrupted.
• Do not turn the power off or open the battery compartment when the LED is blinking or lit up; otherwise, the image may not get stored.
5
Duo Manual (510939-02) 8/7/02 12:43 pm Page 6
Camera Features
• Stores up to 14 Fine, 33 Normal or 54 Economy mode photos with
7MB internal memory
• Virtually unlimited storage using the removable MultiMediaCard (MMC).
MMC memory cards sold separately at electronic or computer retailers.
• 1.6" Color LCD
• USB connection and cable
• TV connection (NTSC and PAL) and cable
• Built-in automatic flash
• Focus free from 4 feet (1.2 meter) to infinity
• 1280 x 960 pixel resolution (1.3 Mega Pixel)
• TV On Screen Display (OSD) menu
• 2X Digital Zoom
• Video Clip Mode
• Web Camera
• Mass Storage
• Self-timer
• Interchangeable face plates
• Tripod socket
• Multi-language support
System Requirements
PC:
• Microsoft Windows 98SE/ME/2000 and XP
• IBM PC/AT or compatible, 200 Mhz or higher
• Minimum 32MB RAM (64MB recommended)
• USB Port
• 640 x 480 monitor, minimum 16 bit color (1024 x 768 24 bit color recommended)
• 175MB free hard disk space
• 56K or faster modem, ISDN, or LAN connection (for the Web Camera feature only)
• CD-ROM drive
Macintosh:
• Mac OS 9 or higher
• Macintosh Power PC or higher, Minimum 64MB of RAM
• USB Port
• 100MB of available Hard Disk Space
6
Duo Manual (510939-02) 8/7/02 12:43 pm Page 7
1. The Camera
Overview of Your Concord Eye-Q Duo LCD Camera
FRONT/TOP
1
2
6
7
3
4
5
1. Shutter Button
2. Lug for Neck / Wrist Strap
3. Viewfinder
4. Self-timer LED
5. Flash
6. Ir Filter and Lens
7. Interchangeable Face Plate
8. Power Button
9. Camera Ready LED
10. LCD
11. Cable Connection Panel
12. Tripod Socket
13. Mode Switch
14. Navigation Button
15. Menu Button
16. OK Button
17. LCD On/Off Button
18. Battery Door
BACK/BOTTOM
8
9
10
11
12
7
13
14
15
16
17
18
Duo Manual (510939-02) 8/7/02 12:43 pm Page 8
Loading the Batteries
The Concord Eye-Q Duo LCD uses 2 LR6 AA batteries.
Loading the Batteries:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door towards the center of the camera. (fig.1.1)
3. Lift the battery door to open.
4. Insert the batteries with the positive terminal toward the + sign, and the negative terminal toward the – sign. (fig.1.2)
5. Close the battery door.
fig.1.1
fig.1.2
Note: Remove the batteries from the Concord Eye-Q Duo LCD if the camera will not be used for an extended period of time to prevent corrosion or battery leaks.
Checking the Batteries
The camera has a battery indicator that shows the current battery level.
FULL
Batteries are full and ready to use.
LOW
Batteries are low and need to be replaced soon.
8
Duo Manual (510939-02) 8/7/02 12:43 pm Page 9
Turning the Camera on and off
When the camera is turned on, the camera ready LED on the back of the camera blinks and the LCD displays the default settings.
Turning the Camera on and off:
1. Press the Power button to turn the camera on.
(fig.1.3)
2. The camera is ready for picture taking when the camera ready LED stops blinking. (fig.1.4)
3. To turn the camera off, press the Power button for a few seconds.
fig.1.3
T fig.1.4
T
9
Duo Manual (510939-02) 8/7/02 12:43 pm Page 10
LCD Menu Screens
M O D E
Vi d e o C l i p
S e l f - t i m e r O f f
M a i n M e n u
M A I N M E N U
B r i g h t n e s s
S e t u p
E x i t
T i m e - o u t
D r i v e r
T V
L a n g u a g e
S E T U P
1 5 S
P C
N T S C
S E T U P
D e f a u l t
F o r m a t
M a i n M e n u
10
Q U A L I T Y
F i n e
N o r m a l
E c o n o m y
M a i n M e n u
M A I N M E N U
M o d e
Q u a l i t y
F l a s h
W B
F L A S H
A u t o
F l a s h
F l a s h O f f
M a i n M e n u
B R I G H T N E S S
B r i g h t n e s s
W B
AW B
S u n n y
F l u o r e s e n t
T u n g s t e n
1 5 S
3 0 S
6 0 S
9 0 S
N o n
P C
H D D
N T S C
PA L
E n g l i s h
F r a n ç a i s
E s p a ñ o l
D e u t s c h
I t a l i a n o
Duo Manual (510939-02) 8/7/02 12:43 pm Page 11
D E L E T E
D e l e t e O n e
D e l e t e A l l
M a i n M e n u
M A I N M E N U
D e l e t e
T h u m b n a i l
B r i g h t n e s s
E x i t
B R I G H T N E S S
B r i g h t n e s s
D E L E T E O N E
T H I S F I L E
N o
Ye s
D E L E T E A L L
N o
Ye s
11
Duo Manual (510939-02) 8/7/02 12:43 pm Page 12
LCD Status Messages
Messages on the LCD indicate if the memory is full or if there is a problem with the memory.
1. MMC MEMORY IS INSUFFICIENT:
If the file in the internal memory is larger than the available memory space in the
MMC, the file will not be transferred and this message will appear. Please insert a MMC with sufficient memory or delete files.
M M C M E M O RY I S
I N S U F F I C I E N T
2. MMC IS FULL:
The MMC is full
M M C F U L L !
3. INTERNAL MEMORY IS FULL:
The internal memory is full
I N T E R N A L M E M O RY
F U L L
4. ERROR:
The camera’s internal memory or the MMC’s memory may be corrupted. Please format the memory. (P.25)
E R R O R !
12
Duo Manual (510939-02) 8/7/02 12:43 pm Page 13
Turning the LCD On and Off
By default, the LCD automatically turns on when the camera is powered on. Press to turn the LCD on or off.
Using the Display ON/OFF Button:
1. Press once to turn the LCD icons off.
2. Press again to turn the LCD monitor off.
3. Press to turn the LCD on.
A
F I N E
005/080
Camera Ready LED Status
When the Camera Ready LED is:
1. Steady
The camera is in capture mode. Please hold the camera steady during this time; otherwise, the image may come out blurry. (fig.1.5) fig.1.5
2. Blinking
The flash is recharging or the camera is in background storage mode.
You may move the camera in this mode. (fig.1.5)
T
Note: Do not open the battery door or turn the power off while the
Camera Ready LED is steady or blinking; otherwise, the images or video clips in the camera may be damaged.
13
Duo Manual (510939-02) 8/7/02 12:43 pm Page 14
Camera Memory
The Concord Eye-Q Duo LCD can store files in one of two ways using either the camera’s 7MB internal memory or the removable MultiMediaCard (MMC).
MMC memory cards are sold separately and can be purchased from major electronic or computer retailers.
• When the MMC memory card is inserted, the images and video clips stored in the internal memory will be transferred automatically onto the memory card.
LCD
No
Default Memory
MMC
Internal Memory (7MB)
Note: If a MMC with insufficient memory is inserted, there will only be a partial transfer and the memory card will be filled. Please insert a memory card with sufficient memory, or delete images. Please refer to the Deleting Files section for instruction. (P. 28) The files that were not transferred will remain in the internal memory.
14
Duo Manual (510939-02) 8/7/02 12:43 pm Page 15
When the camera’s internal memory or the MMC is full, you will need to delete images to continue to take pictures, or insert a new MMC memory card. Please refer to the Deleting Photos section for instructions.
Note: there may be available storage space by using a lower photo quality setting. Refer to the QUALITY section to select a lower quality setting on P. 19.
Using the MultiMediaCard
Inserting the memory card:
1. Locate the battery door on the bottom of the camera.
2. Slide the button on the battery door towards the center of the camera and lift the door.
3. Insert the MMC as indicated by the arrow. (fig.1.6)
4. Close the battery door.
fig.1.6
Note: For better performance, please use MMC memory cards with 16
MB of storage or higher.
Note: If the internal memory or the MMC is corrupted, the LCD will read ERROR! The memory needs to be formatted. Please format all files to continue. (P.25)
15
Duo Manual (510939-02) 8/7/02 12:43 pm Page 16
2. Camera Mode
Taking Images:
1. Set the camera to Camera Mode by moving the
Mode Switch to .
2. Position the subject in the viewfinder OR the LCD.
(fig.2.1)
3. Gently press the Shutter button (fig.2.2) and keep the camera still until the camera ready LED next to the viewfinder flashes. (fig.2.3)
4. When the image has been captured, the camera ready LED next to the viewfinder begins to blink.
This indicates that the image is being processed.
5. A preview of the image will be displayed on the
LCD for 2 seconds and the file counter number displayed in the LCD will be updated.
fig.2.1
fig.2.2
fig.2.3
MAIN MENU
1. In Camera Mode, press MENU .
2. Press or to toggle between the options.
3. Press to view the sub-menu of the selected option.
4. If you would like to exit any menu, press until Main Menu is highlighted and press
OK to return to the Main Menu.
OR
5. Press MENU return to still image taking mode.
M A I N M E N U
M o d e
Q u a l i t y
F l a s h
W B
16
Duo Manual (510939-02) 8/7/02 12:43 pm Page 17
MODE
M A I N M E N U
M o d e
Q u a l i t y
F l a s h
W B
M O D E
Vi d e o C l i p
S e l f - t i m e r O f f
M a i n M e n u
Taking Video Clips
1. When Video Clip is highlighted in the MODE menu, press .
2. Press the Shutter button to begin recording a continuous video clip. (fig.2.4)
3. Press the Shutter button again to stop recording. (fig.2.5)
OR
4. The camera will continue recording until the memory is almost full.
5. When the recording is completed, the camera will return to still image taking mode.
fig.2.4
P R E S S S H U T T E R TO S TO P fig.2.5
Note: The camera ready LED will blink rapidly when the camera is storing the video clip. Do not open the battery door or turn the camera off while the LED is blinking, otherwise the video clip may not be stored.
Note: To exit video clip mode before recording, press MENU to return to still image taking mode.
17
Duo Manual (510939-02) 8/7/02 12:43 pm Page 18
M A I N M E N U
M o d e
Q u a l i t y
F l a s h
W B
+
M O D E
Vi d e o C l i p
S e l f - t i m e r O f f
M a i n M e n u
Self-timer:
1. Highlight Self-timer in the MODE menu, press to switch to On. (fig.2.6)
2. Press MENU to return to Camera Mode.
3. Position the subject in the camera
4. Press the Shutter button.
5. The camera ready LED and the self-timer LED will blink for 10 seconds and then the image will be captured.
fig.2.6
M O D E
Vi d e o C l i p
S e l f - t i m e r O n
M a i n M e n u
Note: The self-timer is automatically deactivated once the image is taken.
To cancel Self-timer:
1. Highlight Self-timer in the MODE menu, press to switch to Off. (fig.2.7)
2. Press MENU to return to Camera Mode.
A
F I N E
005/080 fig.2.7
18
Duo Manual (510939-02) 8/7/02 12:43 pm Page 19
QUALITY
M A I N M E N U
M o d e
Q u a l i t y
F l a s h
W B
Q U A L I T Y
F i n e
N o r m a l
E c o n o m y
M a i n M e n u
1. In the QUALITY menu, press or to toggle between Fine, Normal and Economy.
2. Press OK to select the quality mode and press MENU to return to
Camera Mode.
JPEG ratio
Images taken with
7MB of Memory (approx.)
Fine
5.5:1
14
Normal
12:1
33
Economy
24:1
54
Note: The selected option will be marked by (
•
).
19
Duo Manual (510939-02) 8/7/02 12:43 pm Page 20
FLASH
M A I N M E N U
M o d e
Q u a l i t y
F l a s h
W B
F L A S H
A u t o
F l a s h
F l a s h O f f
M a i n M e n u
1. In the FLASH menu, press or to choose between Auto ( A ),
Flash ( ), and Flash Off ( ).
2. Press OK to select the flash mode and press MENU to exit.
Flash Status
Auto ( A )
Flash ( )
Flash OFF ( )
Distance from subject
8.5ft (2.5m)and 3.9ft (1.2m).
8.5ft (2.5m)and 3.9ft (1.2m).
3.9ft (1.2m) to infinity
Note: The selected option will be marked by (
•
).
Note: The flash may need time to recharge between images. While it is charging the camera ready LED blinks. When it stops blinking you are ready to take another picture. If the batteries are low, the flash will not work. Please insert fresh batteries.
20
Duo Manual (510939-02) 8/7/02 12:43 pm Page 21
WB (WHITE BALANCE)
M A I N M E N U
M o d e
Q u a l i t y
F l a s h
W B
W B
AW B
S u n n y
F l u o r e s e n t
T u n g s t e n
1. In the WB (WHITE BALANCE) menu, press or to choose between
AWB, Sunny, Fluorescent or Tungsten.
2. Press OK to select the white balance mode and press MENU to exit.
White Balance Option
Auto White Balance (AWB)
Sunny ( )
Fluorescent ( )
Tungsten ( )
Explanation
The camera will automatically choose the white balance setting.
To be used outdoors with sufficient sunlight.
To be used indoors with fluorescent light conditions.
To be used indoors with tungsten light conditions.
21
Duo Manual (510939-02) 8/7/02 12:43 pm Page 22
BRIGHTNESS
M A I N M E N U
B r i g h t n e s s
S e t u p
B R I G H T N E S S
B r i g h t n e s s
M a i n M e n u
Use this option to change the LCD brightness.
1. In the BRIGHTNESS menu, press or to toggle between both options.
2. Press MENU to exit.
22
Duo Manual (510939-02) 8/7/02 12:43 pm Page 23
SETUP
M A I N M E N U
B r i g h t n e s s
S e t u p
E x i t
T i m e - o u t
D r i v e r
T V
L a n g u a g e
S E T U P
3 0 S
P C
N T S C
Using the SETUP menu:
1. Use or to toggle between the options.
2. When the option is highlighted, use to change the setting.
3. Press to select and scroll to the next option or press MENU to exit.
Setup Option
Timeout
Driver
TV
Language
Format
Default
Selection Options
15, 30, 60, 90
None
PC
HDD
NTSC
PAL
English,
Francais,
Espanol,
Deutch,
Italiano
Explanation
Sets the automatic power off option.
Deactivates the automatic power off option.
WDM/TWAIN Driver. Use this mode when using ArcSoft or video conferencing software.
Mass Storage mode. Use this mode to view your images and video clips using the Mass
Storage driver.
Sets the mode the camera needs to adapt to your TV (in North America).
Sets the mode camera needs to adapt with your TV (in Europe).
Sets the language in your camera.
Formats the internal memory or the MMC memory card by deleting all files.
Sets all camera settings to the factory default.
23
Duo Manual (510939-02) 8/7/02 12:43 pm Page 24
TIME-OUT
To extend battery life, the camera will automatically power off after 30 seconds of inactivity. Use this option to change the default setting.
S E T U P
T i m e - o u t
D r i v e r
T V
3 0 S
P C
N T S C
L a n g u a g e
DRIVER
Please refer to the Transferring Files to the Computer section on P.32 for further information.
TV
Please refer to the TV Mode section on P.39 for further information.
LANGUAGE
Use this option to change the language setting in your camera. All menus and messages will be displayed in the selected language.
24
Duo Manual (510939-02) 8/7/02 12:43 pm Page 25
DEFAULT
To set your camera to its default settings:
1. When the Default option is highlighted, press OK .
2. The camera will reset to the factory defaults.
3. Press MENU to exit.
Mode
Flash
White Balance
Quality
Time-out
Driver
TV
Language
Default Setting
Auto ( A )
AWB
Fine
30
PC
NTSC
English
Note: The default version for TV mode will vary depending on the country where the camera was purchased.
FORMAT
Formatting deletes all files. Use this option to format the internal memory or the MMC/SD memory card.
To format the:
• Internal memory – The MMC/SD card must not be in the camera.
• MMC/SD card – Insert the memory card into the camera.
Note: If ERROR! is displayed on the LCD screen, this means that the internal memory or the memory in the MMC/SD is corrupted. Please format the memory to continue.
25
Duo Manual (510939-02) 8/7/02 12:43 pm Page 26
2X Digital Zoom
The Concord Eye-Q Duo LCD can use 2X Digital Zoom to take pictures.
Setting the 2X Digital Zoom Mode:
1. In Camera and/or Video Clip mode, press (T) to zoom into the subject.
2. Press (W) to zoom out and to return to normal mode.
26
Duo Manual (510939-02) 8/7/02 12:43 pm Page 27
3. REVIEW MODE
In review mode, you can review your captured images and video clips through the LCD.
Using REVIEW mode:
1. Slide the Mode Switch towards .
2. Press or to scroll through each file.
File Type
Image
Video Clip
Format
JPG
AVI
2X Enlargement (JPEG)
When viewing images, you may use 2X enlargement to zoom into the stored image.
To use 2X Enlargement:
1. While viewing a JPG file, press OK to enter
2X Enlargement Mode.
2. Press to navigate in the image.
3. Press OK to exit 2X Enlargement mode and to return to the original image.
JPEG
FINE
005/080
Viewing Video Clips (AVI)
To view video clips:
1. Press OK to play the video clip.
AV I
Press OK to Play AVI
008/080
27
Duo Manual (510939-02) 8/7/02 12:43 pm Page 28
MAIN MENU
To use the MAIN MENU in Review Mode:
1. Press MENU to enter the MAIN MENU.
2. Use or to toggle between the options.
3. When the option is highlighted press to enter its submenu.
4. If you would like to exit any menu, press until Exit is highlighted to return to the previous menu.
OR
5. Press MENU to exit.
M A I N M E N U
D e l e t e
T h u m b n a i l
B r i g h t n e s s
E x i t
DELETE
D E L E T E
D e l e t e O n e
D e l e t e A l l
M a i n M e n u
D E L E T E O N E
T H I S F I L E ?
N o
Ye s
To delete one file from the internal memory:
1. When Delete One is highlighted in the DELETE menu, press .
2. The next screen will read " This File?" Press to highlight No or Yes.
Press OK to select.
3. If Yes is selected, the file will be deleted and the camera will return to the Main Menu.
4. If No is selected, no change will be made, and you will return to the
Main Menu.
28
Duo Manual (510939-02) 8/7/02 12:43 pm Page 29
D E L E T E
D e l e t e O n e
D e l e t e A l l
M a i n M e n u
D E L E T E A L L
N o
Ye s
To delete ALL files from the internal memory:
1. When Delete All is highlighted in the DELETE menu, press .
2. The next screen will read "All Files?" Press to highlight No or Yes.
Press OK to select.
3. If Yes is selected, ALL FILES will be deleted and the camera will return to the Main Menu.
4. If No is selected, no change will be made, and you will return to the
Main Menu.
To Delete Files from the MMC:
1. Insert the MMC into the camera.
2. Follow the steps above.
Note: Once images have been deleted, you will not be able to recover them.
29
Duo Manual (510939-02) 8/7/02 12:43 pm Page 30
THUMBNAIL
M A I N M E N U
D e l e t e
T h u m b n a i l
B r i g h t n e s s
E x i t
OK
1. When Thumbnail is highlighted in the Main Menu, press OK to enter the Thumbnail mode.
2. Use to navigate between all of the stored files.
3. Press OK to view the selected file.
BRIGHTNESS
Please refer to the Brightness section on P. 22.
30
Duo Manual (510939-02) 8/7/02 12:43 pm Page 31
4. Software Installation
NOTE: Do not connect the camera to your computer before the camera drivers and software installation is completed.
Installing the Camera Drivers and ArcSoft Applications:
1. Insert the CD-ROM included in your Concord Eye-Q Duo LCD packaging into your computer's CD-Rom drive.
2. The installation screen appears on the computer’s monitor. Follow the software installation instructions on your screen to install the software.
3. When the CD-Rom installation is finished, connect your camera to the computer to complete installation.
4. Follow the on-screen instructions to complete the installation.
NOTE: If your computer has the CD-ROM automatic installation disabled, click on START. Select MY COMPUTER and locate the CD-ROM
Drive. Double click on the CD-ROM Drive icon to show its contents.
Double-click on the file named SETUP.EXE and follow the instructions on your screen.
Note for Mac users: It is not necessary to install the software in the
CD-Rom. Please refer to p.34-35 for instructions on how to use the
Mass Storage feature.
31
Duo Manual (510939-02) 8/7/02 12:43 pm Page 32
5. Transferring Files to the Computer
You can view and store the files you have captured with the Concord
Eye-Q Duo LCD camera using your PC. To download the files for viewing, you must first install the software that comes with your camera.
Connecting the Camera to the Computer:
1. When the camera is connected to the computer for the first time, the camera driver’s installation will begin. Please follow the on-screen instructions to complete the installation.
2. Plug the rectangular end of the USB cable that is included with the Concord Eye-Q Duo LCD into your PC’s USB port. Please refer to your computer’s documentation for more information on the location of the USB port. (fig.5.1) fig.5.1
3. Open the Cable Connection panel on the Concord
Eye-Q Duo LCD, by sliding the door in the downward direction, then lift the door.
4. Plug the square end of the USB cable into the USB connector located inside the Cable Connection panel.
Unplugging the Camera From the Computer
(Windows ME/2000/XP)
1. Click once on the "Unplug or Eject Hardware" icon on the right hand side of your task bar. (fig.5.2)
2. Select "Stop Concord Eye-Q Duo LCD USB Driver V 0.1".
3. Click [OK] in the "Safe to Remove Hardware" prompt.
4. Unplug the USB from the camera.
fig.5.2
32
Duo Manual (510939-02) 8/7/02 12:43 pm Page 33
Windows Only
TWAIN/WDM Drivers (PC Mode)
This mode allows you to view images and to take video clips on your computer. Please refer to the Special Features section for more information. (P. 37)
M A I N M E N U
B r i g h t n e s s
S e t u p
E x i t
T i m e - o u t
D r i v e r
T V
L a n g u a g e
S E T U P
3 0 S
P C
N T S C
Setting PC Mode in your camera
1. Turn the camera on.
2. In the Setup menu, press until Driver is highlighted.
3. Press to change the setting to PC.
4. Turn the camera off.
5. Connect the camera to the computer.
33
Duo Manual (510939-02) 8/7/02 12:43 pm Page 34
Note for Windows users: If switching between PC and HDD mode, please unplug your camera from the computer first.
Mass Storage (HDD)
This mode allows the camera to become an external hard disk drive
(HDD) and you may view or download images and video clips stored in your camera’s internal memory or MMC/SD memory card onto your computer.
M A I N M E N U
B r i g h t n e s s
S e t u p
E x i t
+
T i m e - o u t
D r i v e r
T V
L a n g u a g e
S E T U P
3 0 S
H D D
N T S C
Setting Mass Storage, HDD (Hard Disk Drive) in your camera
1. Turn the camera on.
2. In the Setup menu, press until Driver is highlighted.
3. Press to change the setting to HDD.
4. Turn the camera off.
5. Connect the camera to the computer.
For Windows Users:
Using the Mass Storage mode to view your files:
1. Set your camera to HDD Mode.
2. Connect your camera to the computer.
3. Open My Computer to locate the removable disk drive that contains the files in your camera’s internal memory or MMC memory card.
4. You may view or download files.
NOTE: Please refer to your computer’s documentation for more information on the location of the USB port.
34
Duo Manual (510939-02) 8/7/02 12:43 pm Page 35
For Mac Users:
1. Set your camera to HDD Mode.
2. Connect your camera to the computer.
3. After a few moments, the external hard drive will appear on the desktop.
4. Open the “untitled” removable drive that is on your desktop and open
DCIM > 100DUOPL to view your files.
5. Click on the file that you would like to view.
Unplugging the camera from the computer:
1. Drag the “untitled” removable drive icon on the desktop to the Trash.
2. Unplug the USB cable from the camera.
Note for Mac users: For better performance, please use the USB port located in the back of your computer.
35
Duo Manual (510939-02) 8/7/02 12:43 pm Page 36
Windows Only
Using Software to view images (PC Mode)
1. Launch ArcSoft PhotoImpression software by clicking on Start-
Programs-ArcSoft Camera Suite and choose PhotoImpression from the application list on your screen.
(fig.5.3)
2. Click on the [Camera/Scanner] button. (fig.5.3 a)
3. Click on the drop-down list under
SELECT SOURCE and choose
Concord EYE-Q Duo LCD. fig.5.3
(fig.5.3 b)
4. Click on the Camera/Scanner Icon.(fig.5.3 c) A second window will appear showing the contents (pictures) of your camera’s memory, and options on how to handle them. (fig.5.3 d)
5. Select the picture(s) you want to retrieve, by pressing the Ctrl key on your keyboard and clicking once on each thumbnail.
OR
6. Click on Edit-Select All.
7. Click on Acquire and all pictures will be transferred. (fig.5.3 e)
OR
8. Click on Edit-File Transfer.
9. The pictures just retrieved will be placed as thumbnails on the bottom of your application window. To open them, double-click on the thumbnail. (fig.5.3 f )
You are now ready to print, store or further enhance your pictures. Refer to ArcSoft’s Software Guide for a tutorial on all the features
PhotoImpression offers.
Note: For better viewing performance use VideoImpression to view videos. See the PC Video Clips section.
36
Duo Manual (510939-02) 8/7/02 12:43 pm Page 37
6. Special Features
Windows Only
PC Video Clips (PC Mode)
The Concord Eye-Q Duo LCD has the ability to capture live video clips on your computer by using the ArcSoft VideoImpression software.
To Capture Video Clips on the Computer:
1. Follow the steps from the Connecting the Camera to the computer sections.
2. Launch the ArcSoft VideoImpression software by clicking on Start-
Programs-ArcSoft Camera Suite and choose VideoImpression from the application list on your screen.
3. Click on the NEW icon.
4. Click on the CAPTURE icon.
Note: If the video is not displayed, select “Concord Eye-Q Duo LCD
Video Clips” in the Driver List and click on the Live icon to view live video.
Recording Video Clips:
1. Follow steps 1-4 above.
2. Click on the RECORD icon. To stop recording,press the ESC button on your keyboard or click the PAUSE icon on your screen.
To save your video, simply click on the SAVE icon and follow the onscreen instructions.
To edit, manipulate or create video clips using all the features that
VideoImpression offers, refer to ArcSoft’s software guide for further instructions.
37
Duo Manual (510939-02) 8/7/02 12:43 pm Page 38
Windows Only
Web Camera (PC Mode)
You may also use the Concord Eye-Q Duo LCD as a web camera and a video conferencing camera. It will work with many popular video conferencing software titles.
Using the camera as a Web Camera:
1. Follow the steps from the Connecting the camera to the computer section.
2. Launch Microsoft NetMeeting software.
3. To start the video, click on the start video icon.
4. Follow the NetMeeting on-screen instructions, or refer to NetMeeting’s
Help section.
NOTE: If you do not have NetMeeting already installed on your computer, please visit www.microsoft.com for instructions on how to obtain a copy.
38
Duo Manual (510939-02) 8/7/02 12:43 pm Page 39
TV Mode
The Concord Eye-Q Duo LCD camera allows you to view individual files and record clips on the television. To begin, check your television documentation to determine what video standard you should set your camera to, either NTSC or PAL.
M A I N M E N U
B r i g h t n e s s
S e t u p
E x i t
+
T i m e - o u t
D r i v e r
T V
L a n g u a g e
S E T U P
3 0 S
H D D
N T S C
Changing the TV Mode setting:
1. In the Set-up menu press until TV is highlighted
2. Press to change the setting to NTSC or PAL.
Connecting to the television:
1. Connect the AV cable supplied with your camera into the jack marked VIDEO or VIDEO IN on your television.
2. Turn on your television.
3. Set the television to video mode according to the instructions in the owner’s manual. (This is usually channel 3, 4 or AV)
4. Turn the camera on by pressing the Power button.
5. Connect the other end of the cable into the VIDEO port located underneath the cable connection panel. (fig.6.1) fig.6.1
39
Duo Manual (510939-02) 8/7/02 12:43 pm Page 40
Using TV Mode
1. Connect the camera to the TV.
2. Turn the camera on.
3. Slide the Mode Switch to .
4. The TV will become a live viewfinder.
Note: You may record your TV Mode session by using your VCR.
Please refer to your VCR documentation to learn more about recording.
Using the TV Menu
1. In TV Mode, slide the Mode Switch to .
2. Press MENU to view the TV MENU.
FW Version
This will display the FW Version that your camera is using.
Delete One
1. When you are viewing a file, press MENU .
2. Press to highlight Delete One.
3. Press OK and the file that is in the background will be deleted.
Thumbnail
1. In the TV MENU, press to highlight Thumbnail.
2. Press OK to view all your files in Thumbnail mode.
3. In Thumbnail mode, use the to navigate through your files.
4. Press OK to view the selected file.
Time-out
1. In the TV MENU, press to highlight Timeout.
2. Press to change the Timeout setting.
40
Duo Manual (510939-02) 8/7/02 12:43 pm Page 41
Save
1. In the TV MENU, press to highlight Save.
2. Press OK to Save your changed settings.
Default
1. In the TV MENU, press to highlight Default.
2. Press OK to set the camera to its default settings.
41
Duo Manual (510939-02) 8/7/02 12:43 pm Page 42
Interchangeable Face Plates
The Concord Eye-Q Duo LCD comes with an extra removable face plate that allows you to change the look of your camera.
Changing the face plate:
1. Open the Cable Connection panel by sliding the door in the downward direction and then lifting it until it is open, as displayed in fig.6.2
2. Push down on the PRESS tab and gently lift the face plate to remove. (fig.6.2)
3. Insert the face plate by aligning its tabs with the grooves on the camera as indicated in the illustration and snapping it into place. (fig.6.3) fig.6.2
fig.6.3
42
Duo Manual (510939-02) 8/7/02 12:43 pm Page 43
7. Camera maintenance
Cleaning the Concord Eye-Q Duo LCD:
Clean the outside of the camera by wiping it with a clean, soft and dry cloth.
Cleaning the lens, viewfinder and LCD:
1. Blow gently on the lens and/or viewfinder to remove dust and dirt.
2. Breathe lightly on the lens and/or viewfinder to moisten them.
3. Wipe the lens and/or viewfinder gently with a soft, lint-free cloth or an untreated lens-cleaning tissue.
Note: Do not use cleaning solutions unless they are designed specifically for camera lenses. Do not wipe the camera lens, viewfinder or LCD with chemically treated eyeglass lens tissues as it may scratch.
43
Duo Manual (510939-02) 8/7/02 12:43 pm Page 44
8. Tips and Troubleshooting
SYMPTOM POSSIBLE
CAUSE
POWER
Cannot turn on the camera.
Batteries were not installed correctly.
WEB CAMERA
The video quality is poor.
The video is too slow.
Batteries are dead or weak.
Battery compartment was not closed correctly.
The video quality setting needs to be changed.
POSSIBLE
SOLUTION
Install batteries correctly using the direction indicators on the inside of the battery cover.
Replace batteries.
Close the battery compartment properly.
Go to Tools-Options-
Video. In the Video
Quality section, move the arrow towards Better quality or Faster video for better results.
44
Duo Manual (510939-02) 8/7/02 12:43 pm Page 45
Tips and Troubleshooting
SYMPTOM POSSIBLE
CAUSE
WEB CAMERA/PICTURES/VIDEO CLIPS
Web camera video/picture/video clip has poor quality.
Poor lighting.
Lens is dirty.
POSSIBLE
SOLUTION
Take web camera/picture/ video clip in better lighting.
Clean lens with a soft cloth. See the Camera maintenance section.
Stand at least 3.9ft (1.2m).
away from the subject.
Replace batteries.
Cannot take a web camera video/ picture/video clip.
TAKING PICTURES
Flash picture taken is too light.
Flash picture taken is too dark.
Flash did not work
Picture taken has poor quality.
Subject is too close.
Batteries are dead or weak.
Subject is too close.
Subject is too far away.
Flash is not on.
There was sufficient light for the shot and the flash was not needed.
Camera’s flash has been turned off.
Flash did not charge.
Battery is empty.
Subject or camera moved as picture was taken.
Move subject further away.
Move subject closer.
Turn flash on.
This is normal as your camera’s electronic light sensor is programmed to only fire the flash when needed.
Turn on Automatic Flash.
Verify that the LED has stopped blinking before taking the picture.
Replace the battery.
Hold camera steady until picture is taken.
45
Duo Manual (510939-02) 8/7/02 12:43 pm Page 46
Tips and Troubleshooting
SYMPTOM POSSIBLE
CAUSE
TAKING PICTURES/VIDEO CLIPS
Daylight picture/video clip taken is too dark.
The subject is in front of bright light.
Cannot take a picture/video clip.
Memory is full.
Image is blurred when looking through the viewfinder.
Part of the picture/video clip is missing
Camera is not set to picture/video clip taking mode.
Power is off.
Camera is in "Auto
Power Off" mode.
Viewfinder is dirty.
Something was blocking the lens when taking the picture.
POSSIBLE
SOLUTION
Change the subject’s position.
Delete all pictures and continue shooting.
Download photos to your PC and delete photos from the camera’s memory.
Insert an MMC card with available memory space.
Set the unit to picture/ video clip taking mode.
Turn power on.
Turn power on.
Clean the viewfinder with a soft cloth or cotton swab. See the
Camera maintenance section.
Keep hands, fingers, etc.
away from the lens.
46
Duo Manual (510939-02) 8/7/02 12:43 pm Page 47
Tips and Troubleshooting
SYMPTOM POSSIBLE
CAUSE
TAKING PICTURES/VIDEO CLIPS
Camera is not responding during image capture.
The battery level is low and the camera doesn't have enough power to complete the image capture.
WHITE BALANCE
There is something wrong with the color of the captured image.
White Balance is not set properly.
LCD
The LCD monitor is not clear.
The LCD is not displaying anything.
The LCD plastic monitor cover is dirty.
LCD is turned off.
The battery level is low.
DOWNLOADING PICTURES TO PC
Camera is not responding during image downloading to PC.
The operating system may not be allocating adequate resources to download the image.
POSSIBLE
SOLUTION
Replace batteries.
Reset White Balance.
You should clean the
LCD monitor cover.
Turn on the LCD by pressing .
Replace batteries.
Reset the camera by opening and closing the battery door. Reset the computer.
47
Duo Manual (510939-02) 8/7/02 12:43 pm Page 48
9. Getting Help
If you need help with your camera, refer to the Troubleshooting section of this manual. If you still cannot find the solution, visit our Web site at
www.support.concordcam.com.
Most support issues are answered in the Frequently Asked Questions (FAQ) section.
Toll Free in the US and Canada:
• (866) 522-6372
Toll Free in Europe:
• UK: 0800-1696482
• Germany: 0800-1800563
• France: 0800-917599
• Spain: 900-973195
• Italy: 800-781883
Toll:
• 31-53-4829779
For Software Technical Support, please contact:
In the USA and Canada:
ArcSoft, Inc.
46601 Fremont Blvd.
Fremont, CA 94538
Monday – Friday
8:30AM - 5:30PM (PST)
Tel: (510) 440-9901 Fax: (510) 440-1270
E-mail: [email protected]
Web: www.arcsoft.com
In Europe:
Arcsoft, Inc.
Unit, Shannon Industrial
Estate
Shannon, Co. Clare, Ireland
Tel: +353 (0) 61 702087 Fax: +353 (0) 61 702001
E-mail: [email protected]
48
Duo Manual (510939-02) 8/7/02 12:43 pm Page 49
10. Camera Specifications
Lens
Focusing
Image Sensor
Image Size
Image Quality
Sensor Output
Sensitivity
Exposure
Digital Zoom
ImageStorage
Removable Storage
Output file format
Optical Viewfinder
Image Review
On Screen Display
(OSD)
Menu on LCD
9.9 mm f/3.2 glass lens, 5 elements in 5 groups,
(Equivalent to 48mm lens on 35mm format)
Focus free 1.2m to infinity
1.3M (1280 x 1024 pixel) CMOS sensor
7.7 x 5.8 mm
Fine - 1280 x 960, JPEG 5.5:1
Standard - 1280 x 960, JPEG 12:1
Economy - 1280 x 960, JPEG 24:1
1280 x 960, 24 bit color depth output
Equivalent to ~ ISO100 Silver Halide Film
Auto exposure, Auto white balance
Up to 2X
7MB non-volatile memory:
- Fine, 14 images
- Standard, 33 images
- Economy, 54 images
MMC card slot
JPEG compression
Reversed Galilean type with 85% coverage and 0.4x
magnification
On 1.6" TFT LCD (resolution 312 x 230) with white
LED back lighting and 2X enlargement capability
Display: Frame counter, Battery status
User selectable: Flash mode, self-timer, image quality,
NTSC/PAL TV mode, image delete indicator, camera life view mode and review mode, video clip, white balance (AWB, Sunny, Fluorescent, Tungsten), brightness (2 steps), time-out period, drivers
(TWAIN/WDM and Mass storage), Format memory, digital zoom (1x 1.25x 1.5x and 2x)
49
Duo Manual (510939-02) 8/7/02 12:43 pm Page 50
Camera Specifications
Frame Counter
Self-timer
Flash Unit
Power Source
Battery Life
Power Management
Dimensions
Weight
Connectivity
Web Camera and
Video Mode
System
Connectivity
PC Software
Image Refresh Rate for Web Camera
Video Resolution
LCD Counter, counting forward
Approx. 10s delay with blinking red LED
- Flash-off-mode
- Auto Flash
- Always Flash (for user use in backlight condition)
- When USB is plugged-in, strobe charging is disabled
- 3m (10ft) maximum distance.
- Charge time is less than 7 seconds at room temperature when using new Kodak Battery
3V 2xAA LR6
Up to 120 Pictures (approx.)
Auto-power-off after 15, 30, 60, 90 seconds or no auto time out (User Programmable) without activity
110 x 62 x 35.9mm
116.2g (without battery and MMC card)
USB 1.1 connector direct to PC or Mac
MMC connector connects to MMC card reader
Video connector direct to TV (NTSC / PAL)
WDM for mini port stream driver
TWAIN Driver, WDM Driver and Mass Storage Driver for Windows 98SE, 2000, ME, XP
Mass Storage Driver for Mac OS 9.x or above
Arcsoft PhotoImpression, Arcsoft VideoImpression
30fps
QVGA, Record & Playback
50
Duo Manual (510939-02) 8/7/02 12:43 pm Page 51
Camera Specifications
Accessories CD ROM including Multilingual User Manual PDF format
USB Cable
TV Cable
Wrist Strap
2xAA Alkaline Batteries
Pouch
Multilingual User's Guide
Multilingual Quick Start Guide
51
Duo Manual (510939-02) 8/7/02 12:43 pm Page 52
11. Warranty Information
LIMITED WARRANTY
The manufacturer warrants your Concord Eye-Q Duo LCD camera for a period of
1 year from the date of purchase to be free from defects in material and workmanship. The warranty period shall be extended accordingly if applicable mandatory legislation in effect on the date of purchase requires a longer warranty period. The manufacturer, at its option, will repair or replace or have repaired or replaced, at a location selected by the manufacturer, each product which is proven to the satisfaction of the manufacturer to be defective in material or workmanship. This warranty shall be limited to the camera for defects which were not caused by misuse, abuse, improper handling, tampering or attempts to repair by the owner or any unauthorized repair service or repair man. This warranty is limited solely to the above and applies only for the period set forth. We will not be liable for any loss or damage, incidental or consequential of any kind, whether based on warranty, contract or negligence arising in connection with the sale, use or repair of the product. Our maximum liability shall not in any case exceed the sale price. This warranty is for the benefit of the original purchaser only. This warranty gives you specific legal rights and may vary from jurisdiction to jurisdiction. The manufacturer makes no representation or warranties with regard to the contents of the User's Guide and Quick Start Guide. Non-Concord brand equipment and software and the
Concord Eye-Q Duo LCD TWAIN driver distributed with your Concord Eye-Q Duo
LCD camera are sold "as is" and without warranty of any kind from Concord, including any implied warranty regarding merchantability, fitness for a particular purpose, and non-infringement of third party rights, and all such warranties are disclaimed. The sole warranty, if any, for non-Concord branded items, if any, is given by the manufacturer or producer thereof.
Concord, Concord Eye-Q and the Concord Eye-Q logo are registered trademarks or trademarks of Concord Camera Corp., in the United States and/or other countries. Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. Mac and Macintosh are registered trademarks or trademarks of Apple Computer, Inc. in the U.S. and other countries. All other brands and product names are either registered trademarks or trademarks of their respective owners.
Copyright 2002 Concord Camera Corp.
510939-02
52
Technical Support Hot Line:
Toll Free In the USA & Canada
1-866-522-6372
Toll Free In Europe
UK: 0800-169-6482
BELGIUM: 0800-787-57
FRANCE: 0800-917-599
GERMANY: 0800-1800-563
SPAIN: 900-973-195
ITALY: 800-781-883
All Other Countries - Toll
31-53-482-9779
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
