advertisement
Healthcare
SoftGlo
LED recessed night light
Description
Softglo LED night lights provide low level illumination for patient rooms, corridors, steps or other commercial, institutional and residential applications. The LED light source provides 50,000 hours of service and can be specified in either white or amber LED color. Three different faceplate styles are available with a variety of finishes to best suit the application.
Additional features:
• Adjustable back box to accommodate varied wall construction. (The back box adjusts from 1/2" to 1-1/4" beyond face of wall structural member.)
• No exposed fasteners on the faceplate.
• Unique non-louver faceplate with SO2N.
SO2N
Project:
Location:
Cat.No:
Type:
Lamps:
Notes:
Qty:
SO3N SO4N
Ordering Information
Sample Catalog No: SO3N - 1 - SWH - SBF
Model Number
SO2N
SO3N
SO4N
LED Color
1 White LEDs
2 Amber LEDs
Finish
(standard color is SWH)
SWH Soft white
AL Aluminum
SS 1 Brushed stainless steel
CC 2 Custom color
Options
SBF Slow blow fuse
LBB Less back box
1 The SS finish is only available on the SO4 model.
2 Customer to provide color chip to match.
Accessories:
SOBB – Back box only
SOBBSBF – Back box only with slow blow fuse
SO_Series www.chloride-lighting.com 11/18 page 1 of 2
SO2N faceplate
SO3N faceplate
SO4N faceplate
SO
SoftGlo LED recessed night light
Specifications
Construction The 3" deep back box is formed from 20 gauge galvanized steel with spot welded, overlapped corners for added strength. 7/8" knockouts are provided on the ends and back wall of mounting box.
Softglo comes with a pair of steel hanger bars and adjustable steel brackets to simplify installation. The brackets can be locked in place without tools.
The SO2N faceplate is diecast from aluminum and can be finished in either a white or aluminum powdercoat paint finish. The LEDs are covered with a plastic lens.
The SO3N faceplate has a steel louver plate with a die cast aluminum frame. It can be finished in either a white or aluminum powdercoat paint finish.
The SO4N faceplate has a louver plate and frame formed from steel. It can be finished in the white or aluminum powdercoat paint finish. It can also be specified in brushed stainless steel (SO4N/
SS).
Listings UL and CUL listed.
Electrical 120-277 universal voltage at 50-60
Hz., 0.2 amps max. 15 watt load at 120v and
13.5 watt load at 277v. 347v is not available
Installation The two sets of adjustable hanger bars can be extended up to 24" and attached to the wall framing. The adjustable back box allows the face of the box to be flush with the finished wall surface.
No tools are required to lock the box in position.
7/8" knockouts provided at the ends and back of the back box. Faceplates utilize a set of torsion springs to securely pull the plate to the back box.
Warranty The driver has a warranty of 3 years from the date of manufacture.
Dimensional Data
SOFTGLO-SO2N FACEPLATE
(FRONT VIEW)
8-1/4''
(209.6mm)
SOFTGLO-SO3N FACEPLATE
(FRONT VIEW)
8-1/4''
(209.6mm)
SOFTGLO-SO4N FACEPLATE
(FRONT VIEW)
7-15/16''
(201.6mm)
BACKBOX
(FRONT VIEW)
HANGER BARS ADJUST FROM 14-1/4" (362mm) TO 26" (660.4mm)
7/8'' Ø KNOCKOUT
7-3/4''
(196.9mm)
BACKBOX
(SIDE VIEW)
STUD
1/2" DRY WALL
SO2N = .063'' (1.6mm)
SO3N = .144'' (3.7mm)
SO4N = .235'' (6.0mm)
3/4'' (19.1mm) ADDITIONAL TRAVEL DISTANCE
NOTE: BACK BOX CAN BE ADJUSTED TO
ACCOMMODATE FROM 1/2'' (12.7mm) - APPROX.
1-1/4'' (31.8mm) FINISHED WALL SURFACE.
3''
(76.2mm)
© 2019 Signify Holding. All rights reserved. This document may be subject to change.
No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed.
All trademarks are owned by Signify Holding or their respective owners.
SO_Series www.chloride-lighting.com 11/18 page 2 of 2
Signify North America Corporation
200 Franklin Square Drive,
Somerset, NJ 08873
Telephone 855-486-2216
Signify Canada Ltd.
281 Hillmount Road,
Markham, ON, Canada L6C 2S3
Telephone 800-668-9008
advertisement
Related manuals
advertisement