Avocent SWITCHVIEW PC Quick Installation Manual

Avocent SWITCHVIEW PC is a compact and versatile KVM switch that allows users to control multiple computers from a single keyboard, mouse, and monitor. With its ability to support up to 4 computers, it's an ideal solution for small offices, home offices, and IT professionals who need to manage multiple systems simultaneously. It features:

Easy and quick installation process with labeled ports for simple connection of computers and peripherals.
Hotkey and push-button controls for effortless switching between computers, providing a seamless and efficient workflow.
Adjustable Autoscan delay time for automated switching between connected computers, enabling convenient monitoring of multiple systems.

PDF

سند

تبلیغات

The Power of Being There

Quick Installation Guide

SwitchView

PC

2 or 4-Port PS/2 Desktop KVM Switch

NOTE: If keyboard or mouse issues arise when using a low-power system such as a laptop, you should order an optional power supply. Contact Avocent for more details.

1 Connect your peripherals

2 Connect your computers

3 Power up your system

To install the switch

Monitor

DC 9V

Console port

VGA 4

COMPUTER 4

VGA 3

COMPUTER 3

VGA 2

COMPUTER 2

VGA 1

COMPUTER 1

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

1 Connect the power supply

2 Connect your peripherals

Connect your computers

Power up your system

NOTE: If using a USB device other than a keyboard or mouse, plug in the external power adaptor.

Quick Installation Guide

SwitchView

DVI

2 or 4-Port DVI USB KVM Switch

Quick Installation Guide

SwitchView

MM1/MM2

2 or 4-Port USB PS/2 KVM Switch with USB Hub 1.1/2.0

��

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Hotkey and push-button reference sheet

Hotkey sequence

The hotkey sequence is activated by pressing the ScrLk key twice and then entering the desired hotkey command.

All SwitchView Switches

COMMAND

Select PC

HOTKEYS

ScrLk + ScrLk + X x = 1 ~ 2 or 1 ~ 4 for PC channel number

Next Higher/Lower

Channel

Beep Sound

On/Off

Autoscan

ScrLk + ScrLk + Up Arrow/Down

Arrow

ScrLk + ScrLk + B

ScrLk + ScrLk + S

PUSH-BUTTON

Press the Select button to select the next channel

Press the Select button to toggle to the next channel

N/A

Press any key to stop Autoscan

SwitchView DVI, MM1 and MM2 Switches only

Switch KVM and

USB Hub

(No Audio)

ScrLk + ScrLk + Fx

Fx is the function key that corresponds to the port number

(F1 ~ Port 1, F2 ~ Port 2,

F3 ~ Port 3, F4 ~ Port 4)

Switch KVM and

Audio

(No USB Hub)

Bind PC and Hub Port

Control Switching

ScrLk + ScrLk + Fy

Fy = F5 ~ F8

(F5 ~ Port 1, F6 ~ Port 2,

F7 ~ Port 3, F8 ~ Port 4)

ScrLk + ScrLk + Z

Unbind PC and

Hub Port Control

Switching 1

Bind PC and Audio/

Mic Switching

ScrLk + ScrLk + X

ScrLk + ScrLk + Q

Unbind PC and Audio/

Mic Switching

Autoscan with

Programmable

Delay Time

ScrLk + ScrLk + W

ScrLk + ScrLk + S + X

X = 1 ~ 6

1 - 10” ; 2 - 20” ; 3 - 3” ;

4 - 40” ; 5 - 50” ; 6 - 60”

ScrLk + ScrLk + (backspace) Previous PC Channel

SwitchView DVI and MM2 Switches only

Define Hotkey

Preceeding Sequence

ScrLk + ScrLk + H + (y) y = ScrLk ,

Num Lock

Caps Lock , Esc , F12 or

Autoscan with

Programmable

Delay Time

ScrLk + ScrLk + S + (z) z = 0 ~ 9

1 - 10” ; 2 - 20” ; 3 - 3” ;

4 - 40” ; 5 - 50” ; 6 - 60” ;

7 - 70” ; 8 - 80” ; 9 - 90” ;

0 - 100”

SwitchView PC and MM1 Switches only

Reset KVM ScrLk + ScrLk + End

Press the corresponding button to select the specific

PC + USB hub port control.

N/A

DESCRIPTION

Select the active channel

Select the next connected channel

Toggle on/off beep sound for switching confirmation

Autoscan through every connected channel for quick screen browsing of each channel

Select the PC channel for all USB hub ports control (joint select PC port and hub port control if binding is enabled)

Select the active audio and mic channel (joint select PC/Audio and mic channel if binding is enabled

Enable the binding of PC port and hub port control switching (factory default)

Disable the binding of PC port and hub port control switching

Enable the binding of PC port and audio/mic switching (factory default)

Disable the binding of PC port and audio/mic switching

Specify delay time within a range of 10 ~ 60 seconds (4-port only)

Toggle between previous channel and current channel

Select the hotkey preceding sequence from the following: ScrLk , Caps Lock , Esc , F12 or

Num Lock

Specify delay time within a range of 10 ~ 100 seconds

Reset the KVM switch for switch system reboot

NOTE: The default setting of the SwitchView MM1 USB KVM switch is appropriate for most systems. However, to utilize a USB keyboard/mouse, you may need to disable the PS/2 option in the BIOS and enable the USB option instead. In order for your PC to ﬁnd your USB keyboard and mouse, you will need to sync your hub port control and PC port selection (for example, the green PC port LED and red USB hub port LED should be aligned). Also, USB keyboard users will NOT be able to utilize the SwitchView MM1 switch hotkey function.

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Safety, EMC and Environmental Approvals and Markings

Caution: To ensure safe use of this product, use only the power adaptor provided by the manufacturer.

USA Notiﬁcation

Warning: Changes or modiﬁcations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Notiﬁcation

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

WEEE

In the European Union, this label indicates that this product should not be disposed of with household waste. It should be deposited at an appropriate facility to enable recovery and recycling. For information on how to recycle this product responsibly in your country, please check with the seller of the product, or the seller of the product that replaces this product.

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

سلام! من یک ربات چت هوش مصنوعی هستم که به طور خاص برای کمک به شما در مورد Avocent SWITCHVIEW PC Quick Installation Manual آموزش دیده‌ام. من سند را به طور کامل بررسی کرده‌ام و می‌توانم به شما کمک کنم اطلاعات دقیقی را که نیاز دارید پیدا کنید یا محتوا را به زبان ساده و واضح توضیح دهم. چه به دنبال راهنمایی در مورد ویژگی‌های خاص، مراحل عیب‌یابی یا استفاده عمومی باشید، می‌توانید سوالات خود را بپرسید. هرچه جزئیات بیشتری در مورد نگرانی‌ها یا نیازهای خود ارائه دهید، من می‌توانم دقیق‌تر و موثرتر به شما کمک کنم!